LG 43UP80006 User Manual
Displayed below is the user manual for 43UP80006 by LG which is a product in the TVs category. This manual has pages.
Related Manuals
Dismantling information
Type of
Product LED TV
Model
name UP77 Series, UP78 Series,
UP80 Series, UP81 Series
This document covers derivation model
43/50/55/65UP77#####, 43/50/55/65UP78#####,
43/50/55/60/65UP80#####,
43/50/55/65UP81#####, which has same
conceptual design and dismantling process
Product Identification
Contents
1. Materials and components for Selective Treatment
2. Tools Required
3. Product Dismantling Process
Displays must be stored in accordance with the requirements stipulated in Appendix VIII
(1) or (2) of Directive 2012/19/EU and must, amongst other things, be stored in a
weatherproof manner. Containers with covers must be used when storing and transporting
the Displays.
The document is intended for use by end-of-life recyclers or treatment facilities. It provides
the basic instructions for the disassembly of LG products to remove components and
materials requiring selective treatment.
1. Materials and components for Selective Treatment
Materials and components Notes Included
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA) With a surface greater
than 10 square cm O
(main, power,
T-con, IR, Wi fi)
Batteries For Remote control O
Internal coin batteries -
Mercury containing components display backlights -
Liquid Crystal Displays (LCD) with a surface
greater than 100 square cm
(or OLED module for OLED TV)
Includes background
illuminated displays with
gas discharge lamps O
Capacitors / condensers (Containing PCB /
PCT) -
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height O
External electric cables cords Power cord O
Gas Discharge Lamps -
Plastics containing Brominated Flame
Retardants -
Components and waste containing asbestos -
Components, parts and materials containing
refractory ceramic fibers -
Components, parts and materials containing
radioactive substances -
Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under
the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions
as much as possible, a complete disposal of the old appliance is required. This treatment may only be
performed in authorized handling plants.
2. Tools Required
List the type that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description Tool information
Screw driver
Nipper
3. Product Dismantling Process
1. Batteries
Batteries can easily be removed from the remote control once the back cover of the
remote control has been removed.
3. Product Dismantling Process
2. PCBs and LCD Module
The back cover of the display can easily be removed by hand and screw driver.
Once removed, this will expose the accessible electronic units (PCBs)
which can now be easily removed with hand and screw driver.
LCD (together with their casing) is only left after all other parts like electronic units have
been removed.
Remove the IR module
Remove Screw
LCD module
1) Hold the Right(Left) bottom handle and lift the B/C
2) At the same time, gently pushing the push points
(Apply same method Left/ Right)
Remove the speaker units.
Holding the mark( )and
lift up the B/C in the upward
3. Product Dismantling Process
3. Power cord
A Power cord plugged into the back of the display can easily be removed by hand and
screw driver
Detached type
4. Capacitors > 25 mm
Capacitors > 25 mm are located in the power supply units and can be removed by
nipper