Table of Contents
LG 49SH7DB User Manual
Displayed below is the user manual for 49SH7DB by LG which is a product in the Signage Displays category. This manual has pages.
Related Manuals
2
ENGLISH
TABLE OF CONTENTS
3 LICENSES
4 ASSEMBLY AND PREPARATION
4 Optional Accessories
6 Parts and Buttons
6 Connecting the Stand
7 Connecting the Speakers
7 Connecting IR & Light Sensor
8 Portrait Layout
9 Attaching and Removing the LG Logo
Bracket
10 Installing on a Wall
12 REMOTE CONTROL
14 Displaying the Device Name
Connected to an Input Port
14 White Balance Adjust Menu
15 MAKING CONNECTIONS
15 Connecting to a PC
15 External Device Connection
17 Daisy Chain Monitors
18 TROUBLESHOOTING
21 PRODUCT SPECIFICATIONS
3
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX®
video. To play purchased DivX movies, first register your device at vod.divx.com.
Find your registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified®and associated logos are trademarks of DivX, LLC and are
used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
•The warranty will not cover any damage caused by using the product in an excessively dusty environment.
NOTE
4
ENGLISH
ASSEMBLY AND PREPARATION
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
Cable Holders/
Cable Ties
Screws
Diameter 4.0 mm x Pitch 0.7 mm x
Length 10 mm (including spring washer)
Speakers
SP-2100
Stand kit
Speaker kit
Screws
Diameter 4.0 mm x
Pitch 0.7 mm x Length 8 mm
(including spring washer)
Screws
Diameter 4.0 mm x
Pitch 1.6 mm x
Length 10 mm
•Always use genuine components to ensure safety and product performance.
•The product warranty will not cover damage or injury caused by the use of counterfeit components.
CAUTION
•The accessories provided with your product may vary depending on the model or region.
•Product specifications or contents in this manual may be changed without prior notice due to upgrade of
product functions.
•SuperSign Software & Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for
your model.
NOTE
Stand
ST-200T
5
ENGLISH
•Cable holder/Cable tie may not be available in some areas or for some models.
•Optional accessories are available for some models. If necessary, please purchase them separately.
•Pixel sensor is sold separately. You can obtain additional accessories from your local retail store.
NOTE
Screws
Card (Easy Setup Guide)
KT-OPSA
OPS kit
Connecting
Cable
Power Cord
Pixel sensor kit
KT-SP0
Wi-Fi Dongle kit
AN-WF500
6
ENGLISH
Parts and Buttons
- The image may be different according to the
model
Buttons
Connecting the Stand
- For certain models only.
- The image may be different according to the
model
1
y:Changes the input source.
y:
Accesses the main menus, or saves your
input and exits the menus.
y:
Adjust the up and down.
y: Moves left and right.
y:
Displays the current signal and mode.
y/I: Turns the power on or off.
2
7
ENGLISH
Connecting the Speakers
- For certain models only.
- The image may be different according to the
model.
1 Connect an input signal cable before installing
the speakers.
3 Connect the speaker cables noting the correct
polarity. Use cable holders and cable ties to
organize the speaker cables.
2 Mount the speakers by using screws as
shown below. Make sure the power cable is
disconnected before making a connection.
Connecting IR & Light Sensor
When you connect the cable to the product, the
feature for receiving remote control signals is
activated. The IR & light sensor is magnetic. Attach
it to the front edge of the product for use.
[Front]
•Please turn off the power before removing the
cable. Connecting or removing the speaker
cable while turned on may result in no sound.
NOTE
CAUTION CAUTION
•The signal strength of the IR and Light sensor
will decrease if the sensor is not placed in front
of the product.
NOTE
8
ENGLISH
Portrait Layout
When installing in a portrait layout, rotate the
monitor counterclockwise 90 degrees (when facing
the screen).
(This is not available for all models.)
The Kensington security system connector is
located at the back of the monitor. For more
information on installation and use of this system,
refer to the manual provided with the Kensington
security system or visit
http://www.kensington.
com
.
Connect the Kensington security system cable
between the monitor and a table.
Using Kensington Lock
•The Kensington security system is optional. You
can obtain additional accessories from most
electronics retail stores.
NOTE
9
ENGLISH
Attaching and Removing the LG Logo Bracket
- For certain models only.
- The image may be different according to the model.
Removing the LG Logo
1 Lay a clean cloth on the floor, and then put
the monitor on it with the screen face down.
Remove the two screws that secure the LG
Logo Bracket to the bottom of the rear side of
the monitor using a screwdriver.
2 After removing the screws, remove the LG
Logo. When re-attaching the LG Logo, follow
the process in reverse order.
Attaching the LG Logo on the right side
1 Lay a clean cloth on the floor, and then put
the monitor on it with the screen face down.
Remove the two screws that secure the LG
Logo Bracket to the bottom of the rear side of
the monitor using a screwdriver.
2 After removing the screws, remove the LG
Logo. Attach the LG Logo Bracket with the two
screws, aligning it with the holes at the right
side.
LG Logo Bracket
10
ENGLISH
Installing on a Wall
For proper ventilation, allow a clearance of 100
mm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
To install your monitor on a wall, attach a wall
mounting bracket (optional part) to the back of the
monitor.
Make sure that the wall mounting bracket is
securely fixed to the monitor and to the wall.
1 Use only screws and wall mounting brackets
that conform to VESA standards.
2 Screws which are longer than standard length
may damage the inside of the monitor.
3 A non-VESA standard screw may damage
the product and cause the monitor to fall. LG
Electronics is not liable for any accidents related
to the use of non-standard screws.
4 Please use VESA standard as below.
•785 mm and above
* Fixing screws: Diameter 6.0 mm x Pitch
1.0 mm x Length 12 mm
100 mm
100 mm
100 mm
100 mm 100 mm
•Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
•If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall
mount and contact your local dealer or qualified personnel to assist with the installation.
•Do not over tighten the screws as this may damage the monitor and void your warranty.
•Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by
misuse or use of improper accessories are not covered by the warranty.
•To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
instructions. (This pertains only to Australia and New Zealand.)
CAUTION
•The wall mount kit includes the installation guide and all necessary parts.
•The wall mounting bracket is optional. You can obtain additional accessories from your local dealer.
•The length of screws required may differ depending on the wall mount. Be sure to use the correct length.
•For more information, please refer to the guide provided with the wall mount.
NOTE
785 mm
11
ENGLISH
Securing the monitor to a wall (optional)
(Procedure may differ depending on the model.)
1 Insert and tighten the eyebolts, or brackets and
bolts on the back of the monitor.
- If there are already bolts inserted in the
eyebolts’ position, remove the other bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eyebolts on the rear of the monitor.
3 Connect the eyebolts and wall brackets tightly
with a sturdy cord.
Make sure the securing cord is horizontal with
the flat surface.
•Make sure that children do not climb on or hang from the monitor.
CAUTION
•If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
» Using cabinets or stands recommended by the manufacturer.
» Only using furniture that can safely support the monitor.
» Ensuring the monitor is not overhanging the edge of the supporting furniture.
» Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both
the furniture and the monitor to a suitable support.
» Not placing cloth or other materials between the monitor and supporting furniture.
» Educating children about the dangers of climbing on furniture to reach the monitor or its controls.
WARNING
•Use a platform or cabinet that is large and strong enough to support the monitor securely.
•Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail
store.
•The illustration shows a general example of installation and may look different from the actual product.
NOTE
12
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual
carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the
labels inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.
•Do not mix old and new batteries, as this may
damage the remote control.
•Be sure to point the remote control toward the
remote control sensor on the monitor.
CAUTION
ID
BACK TILE
ON OFF
EXIT
(POWER) Turns the monitor on or off.
MONITOR ON Turns the monitor on.
MONITOR OFF Turns the monitor off.
ENERGY SAVING( ) Adjusts the brightness of the picture to reduce
energy consumption.
INPUT Selects the input mode.
3D Used for viewing 3D videos. (This model does not support this.)
1/a/A Toggles between numerical and alphabetical.
(Depending upon the model, this feature may not be supported.)
Number and Alphabet buttons
Enters numerical or alphabetical characters depending upon the setting.
(Depending upon the model, this feature may not be supported.)
CLEAR Deletes the entered numerical or alphabetical character.
(Depending upon the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume.
ARC Selects the Aspect Ratio mode.
AUTO Automatically adjusts picture position and minimizes image
instability (available for RGB input only). (Depending upon the
model, this feature may not be supported.)
MUTE Mutes all sounds.
BRIGHTNESS Adjust the brightness by pressing the Up and Down
buttons on the remote control. In USB mode, the OSD
menu has the Page function to move to the next file list.
(Depending upon the model, this feature may not be
supported.)
13
ENGLISH
PSM Selects the Picture Mode.
INFO Views the information of the currently program and the screen.
W.BAL Enters the White Balance menu.
SETTINGS Accesses the main menus or saves your input and exit menus.
S.MENU SuperSign menu key (Depending upon the model, this feature
may not be supported.)
Navigation Buttons Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Allows you to move back one step in the user interaction function.
EXIT Quit all OSD tasks and applications.
Allows you to control various multimedia devices to enjoy
multimedia simply by using the remote control through the
SimpLink menu. (Depending upon the model, this feature
may not be supported.)
TILE Selects the TILE Mode.
PICTURE ID ON/OFF When the Picture ID number matches the Set ID
number, you can control whichever monitor you
want in multi-display format.
USB Menu Control Buttons Controls media playback.
14
ENGLISH
Displaying the Device Name
Connected to an Input Port
Display which devices are connected to which
external input ports.
1 Access the Input list screen and press the red
(input label) button on the remote control.
2 You can assign an input label for every input
except USB.
•External inputs supported : HDMI, DVI-D,
DISPLAYPORT, OPS,
RGB
•Labels available : PC, DTV
•The input labels are displayed on the Input Label
screen or at the top left of the screen when you
change the external input setting.
•For DTV/PC-compatible signals, such as
1080p 60 Hz, the screen settings may change
according to the input label. The Just Scan
option is available if a PC is connected as an
external device.
NOTE
White Balance Adjust Menu
Press the W.BAL button on the remote control.
•R-Gain : Adjusts the level of red. The higher the
number, the redder the set. Decrease
the number if the screen looks too red.
•G-Gain : Adjusts the level of green. The higher
the number, the greener the set.
Decrease the number if the screen
looks too green.
•B-Gain : Adjusts the level of blue. The higher the
number, the bluer the set. Decrease the
number if the screen looks too blue.
•Backlight : Adjusts the brightness. The higher
the number, the brighter the set.
This works in the same way as the
backlight of the user menu.
•Reset : Resets the white balance value to the
factory settings.
15
ENGLISH
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external
device you want to connect.
For more information about external device connections, see the user manual provided with each device.
Connecting to a PC
Some of the cables are not provided.
This monitor supports the Plug & Play* feature.
* Plug & Play: a feature that enables a PC to recognize devices attached by the user without device
configuration or user intervention when powering up.
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Some of the cables are not provided. For the best picture and sound quality, connecting external devices to
your monitor using HDMI cables is recommended.
16
ENGLISH
•Connect the signal input cable and tighten it by turning the screws clockwise.
•Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on
the screen.
•Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a
screensaver if possible.
•A wireless communication device near your monitor can affect the image.
CAUTION
•For the best image quality, using the monitor with HDMI connection is recommended.
•To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core,
such as a DVI cable.
•If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
•Sometimes red, green, or blue spots may appear on the screen. This is normal.
•Use a High Speed HDMI®/TM cable.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
•Recommended HDMI Cable Types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
•If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to
manually change the default audio output to HDMI.
•If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
•You may experience compatibility issues if you use HDMI-PC mode.
•Make sure the power cable is disconnected.
•If you connect a gaming device to the monitor, use the cable provided with the gaming device.
•It is recommended to use the speakers that are provided as optional accessories.
•High Speed HDMI®/TM cables transmit a HD signal up to 1080p and higher.
•Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different
signaling system)
• Apple computers may require an adapter to connect to this monitor. Call or visit their web site for more
information.
NOTE
17
ENGLISH
•If the signal is stable and there is no cable loss, in general, up to 100 monitors can be connected via the DP
Out port (at the recommended resolution). If you want to connect more than this number of monitors, use
a booster.
•If you set the tile mode using DVI or HDMI, you will not be able to watch HDCP-encrypted content.
•If the signal cable between the product and your PC is too long, make sure to use the Booster or optical
cable.
NOTE
Daisy Chain Monitors
To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the
DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product.
* DP Cable - Use a DP cable that is certified to DP1.1a (SST) or higher.
Monitor 1 Monitor 2 Monitor 3 Monitor 4
18
ENGLISH
TROUBLESHOOTING
No image is displayed
Problem Action
Is the product power cord connected? y Check if the power cord is correctly plugged into the power
outlet.
Does the Out of range message
appear?
y The signal from the PC (video card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency
range by referring to the Specifications in this manual.
* Maximum resolution: 1920 x 1080 (60 Hz)
Does the “No Signal” message appear? y The signal cable between PC and product is not connected.
Check the signal cable.
y Press the INPUT menu in the remote Control to check the input
signal.
The Unknown Product message appears when the product is connected.
Problem Action
Did you install the driver? y Check if the Plug & Play function is supported by referring to the
video card user manual.
The screen image looks abnormal.
Problem Action
Is the screen position wrong? yCheck if the video card resolution and frequency are supported
by the product. If the frequency is out of range, set to the
recommended resolution in the Control Panel Display Setting
menu.
The screen is displayed abnormally. y The proper input signal is not connected to the signal port.
Connect the signal cable that matches with the source input
signal.
After-image appears on the product.
Problem Action
After-image appears when the
product is turned off.
yIf you use a fixed image for a long time, the pixels may be
damaged. Use the screen-saver function.
yWhen a dark image is displayed on the screen after an image
with high contrast (black and white or gray), this may cause
image sticking. This is normal for LCD screen products.
19
ENGLISH
•The software-related contents may be changed without prior notice due to upgrade of the product
functions.
NOTE
Screen color is abnormal.
Problem Action
Screen has poor color resolution (16
colors).
y Set the number of colors to more than 24 bits (true color). Select
Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or
mono-colored.
yCheck the connection status of the signal cable. Or, re-insert the
PC video card.
Do black spots appear on the screen? y Several pixels (red, green, white, or black color) may appear
on the screen, which can be attributable to the unique
characteristics of the LCD panel. This is not a malfunction of the
LCD.
The operation does not work normally.
Problem Action
The power suddenly turned off. yIs the Timer set?
yCheck the power control settings. Power interrupted.
The audio function does not work.
Problem Action
No sound? ySee if the audio cable is connected properly.
yAdjust the volume.
y See if the sound is set properly.
Sound is too dull. ySelect the appropriate equalizer sound.
Sound is too low. y Adjust the volume.
20
ENGLISH
What is image sticking?
When the LCD panel displays a static image for an
extended period of time, it can cause a voltage
difference between the electrodes that operate
the liquid crystals. When the voltage difference
between the electrodes builds up over time, liquid
crystals have a tendency to remain aligned in
one direction. During this process, a previously
displayed image remains visible. This phenomenon
is referred to as image sticking.
BM BM BM
CFCFCF
OC
PI
PI
TFT Layers
Glass
Glass
LC
CF
I D : UPM123
PW : ******
I D : UPM123
PW : ******
ITO or MoTi Pixel Layer
Recommended operating conditions
1 Change the background and the character
colors using the same time interval.
When changing colors, using complementary
colors helps to prevent image sticking.
2 Change the image using the same time
interval.
Make sure that the characters or images before
changing the image remain in the same location
after changing the image.
•Image sticking does not occur when using constantly changing images but may occur when using a fixed
image for an extended period of time. Therefore, it is recommended that you use the instructions below
to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that
you change the screen at least once every 12 hours at the very minimum; if done more frequently, the
prevention of image sticking is more effective.
CAUTION
ID: UPM 123
PW: **** ID: UPM 123
PW: ****
21
ENGLISH
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions.
“ ” refers to alternating current (AC), and “ ” refers to direct current (DC).
LCD screen Screen type Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Video signal Maximum resolution 1920 x 1080 @ 60 Hz
- This may not be supported on some OS or graphic card
types.
Recommended
resolution
1920 x 1080 @ 60 Hz
- This may not be supported on some OS or graphic card
types.
Horizontal frequency RGB : 30 kHz to 83 kHz
HDMI/OPS/DVI-D/DISPLAYPORT : 28,1 kHz to 83 kHz
Vertical frequency RGB : 50 Hz to 75 Hz
HDMI/OPS/DVI-D/DISPLAYPORT : 50 Hz to 60 Hz
Synchronization Separate Sync, Digital
Input/ Output ports SPEAKER OUT,AUDIO IN/OUT,LAN, PIXEL SENSOR, HDMI,
IR&LIGHT SENSOR, DP IN/OUT, DVI-D, USB, RGB,
RS-232C IN/OUT
Embedded battery Applied
Environmental
Conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
* Applicable only for models that support the speakers
Audio/AUDIO RMS Audio Output 10 W + 10 W (R + L)
Input Sensitivity 0.7 Vrms
Speaker Impedance 8 Ω
22
ENGLISH
LCD screen Pixel pitch 0.4833 mm (H) x 0.4833 mm (V)
Power Rated power AC 100-240 V~ 50/60 Hz 1.2 A
Power consumption On Mode: 110 W (Typ.)
Sleep Mode (DISPLAYPORT): ≤ 0.7 W
Sleep Mode (HDMI,DVI-D,RGB): ≤ 1.0 W
Off Mode: ≤ 0.5W
Dimensions (Width
x Height x Depth) /
Weight
Head 948.7 mm x 555.3 mm x 31.7 mm / 12.5 kg
Head + Stand 948.7 mm x 617.7 mm x 298.3 mm / 13.9 kg
Head + Speaker 948.7 mm x 555.3 mm x 81.3 mm / 13.3 kg
Head + Speaker + Stand 948.7 mm x 617.7 mm x 298.3 mm / 14.7 kg
LCD screen Pixel pitch 0.55926 mm (H) x 0.55926 mm (V)
Power Rated power AC 100-240 V~ 50/60 Hz 1.6 A
Power consumption On Mode: 125 W (Typ.)
Sleep Mode (DISPLAYPORT): ≤ 0.7 W
Sleep Mode (HDMI,DVI-D,RGB): ≤ 1.0 W
Off Mode: ≤ 0.5 W
Dimensions (Width
x Height x Depth) /
Weight
Head 1094.6 mm x 637.4 mm x 31.7 mm / 15.6 kg
Head + Stand 1094.6 mm x 699.7 mm x 298.3 mm / 17.0 kg
Head + Speaker 1094.6 mm x 637.4 mm x 81.3 mm / 16.4 kg
Head + Speaker + Stand 1094.6 mm x 699.7 mm x 298.3 mm / 17.8 kg
42SH7DB
49SH7DB
23
ENGLISH
LCD screen Pixel pitch 0.630 mm (H) x 0.630 mm (V)
Power Rated power AC 100-240 V~ 50/60 Hz 1.7 A
Power consumption On Mode: 140 W (Typ.)
Sleep Mode (DISPLAYPORT): ≤ 0.7 W
Sleep Mode (HDMI,DVI-D,RGB): ≤ 1.0 W
Off Mode: ≤ 0.5W
Dimensions (Width
x Height x Depth) /
Weight
Head 1230.4 mm x 713.7 mm x 31.7 mm / 20.7 kg
Head + Stand 1230.4 mm x 776.1 mm x 298.3 mm / 22.1 kg
Head + Speaker 1230.4 mm x 713.7 mm x 81.3 mm / 21.5 kg
Head + Speaker + Stand 1230.4 mm x 776.1 mm x 298.3 mm / 22.9 kg
55SH7DB
24
ENGLISH
HDMI / OPS / DVI-D / DISPLAYPORT (PC)
Support Mode
Resolution Horizontal
frequency (kHz)
Vertical frequency
(Hz)
640 x 480 31.469 59.94
800 x 600 37.879 60.317
1024 x 768 48.363 60
1280 x 720 44.772 59.855
1366 x 768 47.7 60
1280 x 1024 63.981 60.02
1680 x 1050 65.290 59.954
1920 x 1080 67.5 60
•PC resolutions available for the Input
Label option in RGB/ HDMI/ OPS / DVI-D /
DISPLAYPORT input modes: 640 x 480/60 Hz,
1280 x 720/60 Hz, 1920 x 1080/60 Hz; 480p,
720p, and 1080p DTV resolutions.
•Vertical frequency: The product display
functions by the screen image changing dozens
of times every second like a fluorescent lamp.
The vertical frequency or refresh rate is the
number of image displays per second. The unit
is Hz.
• Horizontal frequency: The horizontal interval
is the time taken to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
•DISPLAYPORT does not support YCbCr 4:2:2.
NOTE
RGB(PC) Support mode
Resolution Horizontal
frequency (kHz)
Vertical
frequency (Hz)
720 x 400 31.468 70.8
640 x 480 31.469 59.94
800 x 600 37.879 60.317
1024 x 768 48.363 60
1280 x 720 44.772 59.855
1280 x 960 60 60
1152 x 864 57.717 59.934
1280 x 1024 63.981 60.02
1920 x 1080 67.5 60
HDMI / OPS/ DISPLAYPORT (DTV) Support
Mode
Resolution Horizontal
frequency (kHz)
Vertical frequency
(Hz)
480/60p 31.5 60
576/50p 31.25 50
720/50p 37.5 50
720/60p 45 60
1080/50i 28.1 50
1080/60i 33.75 60
1080/50p 56.25 50
1080/60p 67.5 60
Make sure to read the Safety Precautions
before using the product.
The model and serial numbers of the SET are
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON
or OFF this device.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
ENERGY STAR® is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency (EPA).
As an ENERGY STAR® Partner LGE U. S. A., Inc. has
determined that this product meets the ENERGY
STAR® guidelines for energy efficiency. Refer to
ENERGY STAR.gov for more information on the
ENERGY STAR® program.
2
ENGLISH
TABLE OF
CONTENTS
3 USING THE MONITOR
3 Using the Input List
3 Adjusting Aspect Ratio
5 ENTERTAINMENT
5 Using the Network
5 - Connecting to a Network
7 - Network Status
7 Using the My Media
7 - Connecting USB storage devices
9 - Browsing Files
11 - Viewing Movies
14 - Viewing Photos
16 - Listening to Music
18 - Viewing the Contents List
19 CUSTOMIZING SETTINGS
19 Accessing Main Menus
20 - PICTURE Settings
23 - AUDIO Settings
24 - TIME Settings
25 - OPTION Settings
28 - NETWORK Settings
29 IR CODES
31 TO CONTROL MULTIPLE
PRODUCTS
31 Connecting the Cable
32 RS-232C Configurations
32 - 4P Cable
32 - RS-232C Cable
32 Communication Parameter
33 Command Reference List
35 Transmission / Receiving Protocol
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
3
ENGLISH
Using the Input List
1 Press INPUT to access the Input List.
2 Press the navigation buttons to scroll to one of the input mode and press OK.
USING THE MONITOR
•You can also change the image size by accessing the main menus.
•The Just Scan mode operates when a video signal has resolution of 720p or higher.
Adjusting Aspect Ratio
Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.
•If a fixed image displays on the screen for a long period of time, it will be imprinted and become a
permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.
•If you don't use your monitor, turn the power off or set a screen saver program from the PC or the system to
prevent image retention.
•If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the
screen.
MODE
Aspect Ratio
RGB HDMI DVI-D Display Port OPS
PC DTV PC DTV PC DTV PC DTV PC
16:9 o o o o o o o o o
Just Scan x o x o x o x o x
Set By Program x o x o x o x o x
4:3 o o o o o o o o o
Zoom x o x o x o x o x
Cinema Zoom1 x o x o x o x o x
yRGB-PC
yHDMI
yDVI-D
yUSB
yDisplay Port
yOPS
NOTE
CAUTION
4
ENGLISH
y16:9 : This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen (useful for viewing 4:3 formatted DVDs).
yJust Scan : This Selection will allow you view the picture of best quality without loss of original picture
in high resolution image. Note: If there is noise in original Picture, You can see the noise at the
edge.
ySet By Program : Depending on the input signal, screen aspect ratio changes to 4:3 or 16:9.
y4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear
on both the left and right of the screen.
yZoom : This selection will allow you to view the picture without any alteration, while filling the entire
screen. However, the top and bottom of the picture will be cropped.
yCinema Zoom1 :
Choose Cinema Zoom when you want to enlarge the picture in correct proportion.
Note: When enlarging or reducing the picture, the image may become distorted.
5
ENGLISH
ENTERTAINMENT
Using the Network
Connecting to a Network
For wired network connections, connect the
display to a local area network (LAN) via the LAN
port as shown on the following diagram. Then, set
up the network settings. For wireless network con-
nections, connect the Wi-Fi USB module to the USB
port. Then, set up the network settings.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
To set up the network settings: (Even if your display
has already connected automatically, running
setup again will not harm anything),
Connecting to a wired network
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NET-
WORK and press OK.
3 Press the navigation buttons to select Net-
work Setting and press OK.
4 If you already set network setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
- IP Manual Setting
press the navigation and number buttons. IP
addresses will need to be input manually.
- IP Auto Setting
Select this if there is a DHCP server (Router)
on the local area network (LAN) via wired
connection, the display will automatically
be allocated an IP address. If you’re using a
broadband router or broadband modem that
has a DHCP (Dynamic Host Configuration
Protocol) server function. The IP address will
automatically be determined.
6 When you are finished, press EXIT.
LAN
Router
LA
NW
AN
Cable modem
ETHERNET
@
Internet
Internet
•Do not connect a modular phone cable to the
LAN port.
•Since there are various connection methods,
please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
6
ENGLISH
•Network setting menu will not be available until
the display connected to physical network.
•Since there are various connection methods,
please follow the specifications of your
telecommunication carrier or internet service
provider.
Connecting to a wireless network
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NET-
WORK and press OK.
3 Press the navigation buttons to select Net-
work Setting and press OK.
4 Select Setting from the AP list or Simple
setting (WPS-button mode).
-Setting from the AP list
Select an AP to connect to a wireless network.
- Simple setting (WPS-button mode)
Press the button on the wireless router that
supports PBC to easily connect to the router.
5 When you are finished, press EXIT.
•If you want to access the Internet directly on
your display, the Internet connection should
always be on.
•If you cannot access the Internet, check the
network conditions from a PC on your network.
•When you use Network Setting, check the LAN
cable or check if DHCP in the router is turned on.
•If you do not complete the network settings, the
network may not work properly.
Tips for Network setting
yUse a standard LAN cable with this display. Cat5 or
better with a RJ45 connector.
yMany network connection problems during set
up can often be fixed by re-setting the router or
modem. After connecting the display to the home
network, quickly power off and/or disconnect the
power cable of the home network router or cable
modem. Then power on and/or connect the power
cable again.
yDepending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms of
service. For details, contact your ISP.
yLG is not responsible for any malfunction of the
display and/or the internet connection feature due
to communication errors/malfunctions associated
with your internet connection, or other connected
equipment.
yLG is not responsible for problems within your
internet connection.
yYou may experience undesired results if the net-
work connection speed does not meet the require-
ments of the content being accessed.
ySome internet connection operations may not be
possible due to certain restrictions set by the Inter-
net service provider (ISP) supplying your Internet
connection.
yAny fees charged by an ISP including, without limi-
tation, connection charges are your respon- sibility.
yA 10 Base-T or 100 Base-TX LAN port is required
when using a wired connection to this display. If
your internet service does not allow for such a con-
nection, you will not be able to connect the display.
yA DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the Internet connection feature con-
tained in this display or you may be limited to the
number of devices you can connect at the same
time. (If your ISP limits subscription to one device,
this display may not be allowed to connect when a
PC is already connected.)
yThe use of a router may not be allowed or its usage
may be limited depending on the policies and
restrictions of your ISP. For details, contact your ISP
directly.
NOTE
CAUTION
7
ENGLISH
Tips for Wireless Network Setting
yWireless networks can be subject to interfer-
ence from other devices operating at a fre-
quency of 2.4 GHz (wireless phones, Bluetooth
devices, or microwave ovens). There may also
be interference from devices with a frequency
of 5 GHz, same as other Wi-Fi devices.
yThe surrounding wireless environment can
cause the wireless network service to run
slowly.
yFor an AP connection, an access point device
that supports wireless connection is required
and the wireless connection feature must be
enabled on the device. Contact your service
provider regarding availability of wireless con-
nection on your access point.
yCheck the SSID and security settings of the AP
for AP connection. Refer to the appropriate
documentation for SSID and security settings
of the AP.
yInvalid settings on network devices (wired/
wireless line sharer, hub) can cause the
monitor to run slowly or not operate properly.
Install the devices correctly according to the
appropriate manual and set the network.
yConnection method may differ according to
the AP manufacturer.
•Do not turn the display off or remove a USB
storage device while MY MEDIA menu is
activated, as this could result in loss of files or
damage to the USB storage device.
•Back up your files saved on a USB storage device
frequently, as you may lose or damage the files
and this may be not covered by the warranty.
or
Using the My Media
Connecting USB storage devices
Connect USB storage devices such as a USB flash
memory, external hard drive to the display and use
multimedia features.
Connect a USB flash memory or USB memory card
reader to the Display as shown on the following
illustration. The My Media screen appears.
Network Status
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to
NETWORK and press OK.
3 Press the navigation buttons to select
Network Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option Description
Setting Return to the network setting menu.
Test Test the current network status after
setting the network.
Close Return to the previous menu.
CAUTION
8
ENGLISH
Tips for using USB storage devices
yOnly a USB storage device is recognizable.
yIf the USB storage device is connected through
a USB hub, the device is not recognizable.
yA USB storage device using an automatic rec-
ognition program may not be recognized.
yA USB storage device which uses its own driver
will not be recognized.
yThe recognition speed of a USB storage device
may depend on each device.
yPlease do not turn off the display or unplug
the USB device when the connected USB stor-
age device is working. When such a device is
suddenly separated or unplugged, the stored
files or the USB storage device may be dam-
aged.
yPlease do not connect the USB storage device
which was artificially maneuvered on the PC.
The device may cause the product to malfunc-
tion. Only use a USB storage device which has
normal music files, image files
or movie files.
yPlease only use USB storage devices formatted
using the FAT32 file system. Storage devices
formatted with utility programs that are not
supported by Windows may not be recog-
nized.
yPlease connect power to a USB storage device
(over 0.5 A) which requires an external power
supply. If not, the device may not be recog-
nized.
yPlease connect a USB storage device with the
cable included by the device maker.
ySome USB storage devices may not be sup-
ported or operate smoothly.
yFile alignment method of USB storage devices
is similar to Window XP and the monitor can
recognize up to 100 English characters.
yBe sure to back up important files since data
stored on a USB memory device may be dam-
aged. We will not be responsible for any data
loss.
yIf the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source.
yIf your USB memory device has multiple parti-
tions, or if you use a USB multi-card reader,
you can use up to 4 partitions or USB memory
devices.
yIf a USB memory device is connected to a USB
multi-card reader, its volume data may not be
detected.
yIf the USB memory device does not work prop-
erly, disconnect and reconnect it.
yHow fast a USB memory device is detected
differs from device to device.
yIf the USB is connected in Standby Mode, that
drive will automatically be loaded when the
display is turned on.
yThe recommended capacity is 1 TB or less for
a USB external hard disk and 32 GB or less for
USB memory.
yAny device with more than the recommended
capacity may not work properly.
yIf a USB external hard disk with a Energy Sav-
ing function does not work, turn the hard disk
off and on again to make it work properly.
yUSB storage devices below USB 2.0 are sup-
ported as well. But they may not work properly
with videos.
yA maximum of 999 folders or files can be
recognized under one folder.
yIt is recommended you use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a play-
back error may occur.
yOnly a USB memory device can be used to play
back the files distributed and stored by Super-
Sign Manager. A USB hard disk or multi-card
reader will not work.
yOnly an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
yA USB 3.0 storage device may not work.
yData on some USB storage devices may be
damaged in a high temperature environment.
yIt is recommended that you avoid playing
contents using more than two USB ports
simultaneously.
9
ENGLISH
Browsing Files
Browse files saved in a USB storage device.
1 Press SETTINGS to access the main menu.
2 Press the search button to scroll to MY MEDIA and press OK.
3 Press the Search button to go to the Movie List, Photo List, Music List, or Content List that you want, and
press OK.
Type Supported file format
Movie Codec Media Container Profile
Video MPEG1 / MPEG2 DAT, MPG, MPEG, TS, TP 1080P @ 30 fps
MPEG4
(DivX 3.11, DivX 4,
DivX 5, DivX 6,
Xvid 1.01, Xvid 1.02, Xvid
1.03, Xvid 1.10-beta1/2)
AVI, DIVX, MP4, MKV, TS,
TRP
1080P @ 30 fps
H.264 AVI, MP4, MKV, TS, TRP,
TP
1080P @ 60 fps
Audio MP3 MP3 8 kbps to 320 kbps (Bit rate)
16 kHz to 48 kHz (Sample rate)
AC3 AC3 32 kbps to 640 kbps (Bit rate)
32 kHz, 44.1 kHz, 48 kHz
(Sample rate)
MPEG MP3 32 kbps to 448 kbps (Bit rate)
16 kHz to 48 kHz (Sample rate)
AAC, HEAAC MP4 8 kHz to 48 kHz (Sample rate)
LPCM AVI, WAV 64 kbps to 1.5 Mbps (Bit rate)
8 kHz to 48 kHz (Sample rate)
Bit rate : within 8 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub(MicroDVD, Subviewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.
psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is the subtitle format used in DivX6 files)
Supported file format
10
ENGLISH
Type Supported file format
Photo JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 1920 x 1440
PNG
Interlace : 1200 x 800
BMP
9600 x 6400
yNon-supported files are displayed in the form of predefined icon.
Music MP3
Bit rate : 8 kbps to 320 kbps
ySampling rate MPEG1/2 Layer3 : 16 kHz to 48 kHz
Content
(when using
SuperSign
Manager)
File Extensions : *.cts/ *.cse
Movie
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.trp/*.tp/*.mp4/*.mkv/*.avi/*. avi(motion JPEG)/*.mp4(motion
JPEG)/*.mkv(motion JPEG)
Video format: MPEG1, MPEG2, MPEG4,H.264, DivX 3.11, DivX 4, DivX 5, DivX 6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid 1.10-beta1/2, JPEG
Audio format: MP3, Dolby Digital, LPCM, AAC, HE-AAC
11
ENGLISH
Viewing Movies
Plays movie files saved in the USB storage device.
1 Press SETTINGS to access the main menu.
2 Press the navigation button to scroll to MY MEDIA and press OK.
3 Press the navigation button to scroll to Movie List and press OK.
4 Press the navigation buttons to scroll to a folder you want and press OK.
5 Press the navigation buttons to scroll to a file you want and press OK.
yChange Device : Selects the USB storage device. (Depending on model)
yGo to root folder : Returns to the home screen of My Media.
yGo to upper folder : Returns to the previous screen.
yExit : Exits My Media.
Remote
button Description
Stops the playback.
Plays a video.
Pauses or resumes the playback.
Scans backward in a file.
Scans forward in a file.
Adjusts the screen brightness to save energy.
SETTINGS Show the Option menu.
BACK
Hide the menu on the full-sized screen.
EXIT Returns to Movie List.
or Skips to specific points in a file during playback. The time of a specific point will appear on
the status bar. In some files, this function may not work properly.
6 During movie playback, press OK to access the following settings.
12
ENGLISH
Tips for using playing video files
ySome user-created subtitles may not work properly.
ySome special characters are not supported in subtitles.
yHTML tags are not supported in subtitles.
ySubtitles in languages other than the supported languages are not available.
yThe screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio
language is changed.
yA damaged movie file may not be played correctly, or some player functions may not be usable.
yMovie files produced with some encoders may not be played correctly.
yIf the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
yHD videos with a maximum of 1920 X 1080 @ 25/30P or 1280 X 720 @ 50/60P are supported, depending
on the frame.
yVideos with resolutions higher than 1920 X 1080 @ 25/30P or 1280 X 720 @ 50/60P may not work prop-
erly depending on the frame.
yMovie files other than the specified types and formats may not work properly.
yMax bitrate of playable movie file is 20 Mbps. (only, Motion JPEG : 10 Mbps)
yWe do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
yDTS Audio codec is not supported.
yA movie file more than 30 GB in file size is not supported for playback.
yA DivX movie file and its subtitle file must be located in the same folder.
yA video file name and its subtitle file name must be identical for it to be displayed.
yPlaying a video via a USB connection that doesn’t support high speed may not work properly.
yFiles encoded with GMC(Global Motion Compensation) may not be played.
Video options
1 Press SETTINGS to access the Pop-Up menus.
2 Press the navigation buttons to scroll to Set Video Play, Set Video, or Set Audio, and press OK.
yThe option values changed in Movie List do not affect Photo List or Music List.Therefore, they are not
affected by option values changed in Photo List or Music List.
yThe option values changed in Photo List and Music List do affect each other.
yWhen replaying the video file after stopping, you can play from where it stopped previously.
NOTE
13
ENGLISH
yOnly 10,000 of sync blocks can be supported within the subtitle file.
yWhen playing a video, you can adjust the picture size by pressing the ARC button.
ySubtitles in your language are only supported when the OSD menu is also in this language.
yThe code page options may be disabled depending on the language of the subtitle files.
ySelect the appropriate code page for the subtitle files.
Menu Description
Picture Size Selects your desired picture format during movie play.
Audio
Language
Changes the Language Group of the audio during movie play. Files with a single audio
track cannot be selected.
Subtitle
Language
Turn on/off the subtitle.
Language Activated for SMI subtitle and can select the language within the subtitle.
Code Page Can select the font for subtitle.
When set to default, same font as general menu will be used.
Sync Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of
0.5 secs during movie play.
Position Changes the position of the subtitle either up or down during movie play.
Size Selects your desired Subtitle size during movie play.
Repeat Turn on/off repeat function of movie playback. When turned on, the file within the
folder will be played back repeatedly. Even when the repeated playback is turned off, it
can run the playback if the file name is similar to the previous file.
Select Set Video Play to access the following menus:
NOTE
14
ENGLISH
Viewing Photos
View image files saved in the USB storage device.
1 Press SETTINGS to access the main menu.
2 Press the navigation button to scroll to MY MEDIA and press OK.
3 Press the navigation button to scroll to Photo List and press OK.
4 Press the navigation buttons to scroll to a folder you want and press OK.
5 Press the navigation buttons to scroll to a file you want and press OK.
yChange Device : Selects the USB storage device. (Depending on model)
yGo to root folder : Returns to the home screen of My Media.
yGo to upper folder : Returns to the previous screen.
yExit : Exits My Media.
6 While viewing photos, you can access the following settings.
Menu Description
Slideshow Starts or stops a slideshow with selected photos. If there are no selected photos, all photos
saved in the current folder display during a slideshow. To set a slideshow speed, select Op-
tion.
BGM Turns the background music on or off. To set the background music folder, select Option.
You can adjust option by SETTINGS button on the remote control.
Rotates photos clockwise (90 °, 180 °, 270 °, 360 °).
Enlarges the photo by 100 %, 200 % or 400 %.
Adjusts the brightness of the screen for energy saving.
Option To display the OPTIONs.
Hide Hides the option window.
Exit Return to Photo List.
yThe supported photo size is limited. You cannot rotate a photo if the resolution of the rotated
width is larger than the supported resolution size.
NOTE
15
ENGLISH
Photo options
1 Press SETTINGS to show the Option menus.
2 Press the navigation buttons to scroll to Set Photo View, Set Video, or Set Audio, and press OK.
yThe option values changed in Movie List do not affect Photo List or Music List.Therefore, they are not
affected by option values changed in Photo List or Music List.
yThe option values changed in Photo List and Music List do affect each other.
Select Setting Photo View to access the following menus:
Menu Description
Slide Speed Select a slideshow speed.
(Options: Fast, Medium, or Slow.)
BGM Selects a music folder for the background music.
Repeat Plays background music on repeat.
Random Plays background music in random order.
NOTE
16
ENGLISH
Listening to Music
Plays music files saved in the USB storage device.
1 Press SETTINGS to access the main menu.
2 Press the navigation button to scroll to MY MEDIA and press OK.
3 Press the navigation button to scroll to Music List and press OK.
4 Press the navigation buttons to scroll to a folder you want and press OK.
5 Press the navigation buttons to scroll to a file you want and press OK.
Remote
button Description
Stops playing back the file and moves back to the Music List.
Plays a music file.
Pauses or resumes playback.
Skips to the previous file.
Skips to the next file.
Adjusts the brightness of the screen for energy saving (Off and Screen Off work only.)
SETTINGS Show the Option menu.
BACK
Hides the option window.
EXIT Return to Music List.
or Skips to specific points in a file during playback. The time of a specific point will appear on
the status bar. In some files, this function may not work properly.
6 During music playback, press OK to access the following settings.
yChange Device : Selects the USB storage device. (Depending on model)
yGo to root folder : Returns to the home screen of My Media.
yOpen Music Player : Opens the settings window for music. This feature is activated only during playback.
yGo to upper folder : Returns to the previous screen.
yExit : Exits My Media.
17
ENGLISH
Time elapsed/ Duration
002. B02.mp3
00:31 / 04:04
file name
yA damaged or corrupted music file does not play but displays 00:00 in playtime.
yA music downloaded from a paid service with copyright protection does not start but displays inappropriate informa-
tion in playtime.
yIf you press OK, buttons, screen saver is stopped.
yThe , , , , buttons on the remote control are also available in this mode.
yYou can use the button to select the next music and the button to select the previous music.
Tips for playing music files
yThis unit cannot support the ID3 Tag embedded MP3 files.
1 Press SETTINGS to access the pop-up menus.
2 Press the navigation buttons to scroll to Set Audio Play or Set Audio and press OK.
Music options
yThe option values changed in Movie List do not affect Photo List or Music List.Therefore, they are not
affected by option values changed in Photo List or Music List.
yThe option values changed in Photo List and Music List do affect each other.
When you select the Set Audio Play,
Menu Description
Repeat Repeats the music playback.
Random Plays random music tracks.
NOTE
NOTE
18
ENGLISH
Viewing the Contents List
Plays back the stored files using the Export option in SuperSign Manager.
1 Press SETTINGS to access the main menu.
2 Press the navigation button to scroll to MY MEDIA and press OK.
3 Press the navigation button to scroll to Contents List and press OK.
4 Press the navigation buttons to scroll to a folder you want and press OK.
5 Press the navigation buttons to scroll to a file you want and press OK.
yChange Device : Selects the USB storage device. (Depending on model)
yGo to root folder : Returns to the home screen of My Media.
yGo to upper folder : Returns to the previous screen.
yExit : Exits My Media.
yWhile playing media files from Contents List, only the BACK, EXIT, or volume button are available.
Selecting the BACK or EXIT button stops playing media files and returns to the Contents List.
yWhen you use the distribution feature which utilizes SuperSign Software, the storage device used to
store contents is determined based on the size of the remaining memory space. (Note: If USB ports 1
and 2 have the same memory space, contents will be saved on the storage device connected to USB
port 1.
(Depending on model)
)
yIf there is the AutoPlay folder in the USB device and its files are in supported formats, they can be played
back automatically when the USB device is connected to the monitor.
yIt is recommended that you avoid playing contents using more than two USB ports simultaneously.
yWith respect to the playback of distribution or contents schedules through SuperSign Software, the
schedule executed last time is played.
NOTE
19
ENGLISH
CUSTOMIZING SETTINGS
Accessing Main Menus
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to one of the following menus and press OK.
3 Press the navigation buttons to scroll to the setting or option you want and press OK.
4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
yPICTURE : Adjusts the image size, quality, or effect.
yAUDIO : Adjusts the sound quality, effect, or volume level.
yTIME : Sets the time, date, or timer feature.
yOPTION : Customizes the general settings.
yNETWORK : Sets up the network setting.
yMY MEDIA : Display and play movie, photo and music contents stored on your USB or signage device
(Internal storage device).
20
ENGLISH
PICTURE Settings
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to PICTURE and press OK.
3 Press the navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available picture settings are described in the following:
Setting Description
Energy
Saving
Reduces power consumption by adjusting peak screen brightness.
Level
Off Disables Energy Saving function.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen Off The screen turns off in 3 seconds.
Smart Energy
Saving
Adjusts the backlight and contrast depending on the screen brightness.
Level
Off Disables the Smart Energy Saving function.
On Enables the Smart Energy Saving function to save power
consumption as much as the value set in the smart energy saving
rate.
Picture Mode Selects the picture mode optimized for the viewing environment or the programme.
Mode
Vivid Heightens contrast, brightness, and sharpness to display vivid
images.
Standard Displays images in standard levels of contrast, brightness, and
sharpness.
APS APS ( Auto power saving ) mode reduces power consumption by
dimming control.
Cinema Optimizes the video image for a cinematic look to enjoy movies as if
you are in a movie theater.
Sport Optimizes the video image for high and dynamic actions by
emphasizing primary Colors such as white, grass, or sky blue.
Game Optimizes the video image for a fast gaming screen such as PCs or
games.
Calibration Applies user-customized white balance based on Standard.
Expert1·2 Menu for adjusting picture quality that allows experts and amateurs
to enjoy the best Monitor viewing.
Aspect Ratio Changes the image size to view images at its optimal size.
21
ENGLISH
Basic image options
Setting Description
Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you
decrease the brightness level, the screen becomes darker and the power
consumption will be reduced without any video signal loss.
Contrast Increases or decreases the gradient of the video signal. You may use Contrast
when the bright part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture. You may use Brightness when
the dark part of the picture is saturated.
Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the
picture. The lower the level, the softer the image.
Color Adjusts intensity of all colors.
Tint Adjusts the balance between red and green levels.
Color Temp. Set to warm to enhance hotter Colors such as red, or set to cool to make picture
bluish.
Advanced Control/
Expert Control
You can adjust the picture for each Picture Mode, or adjust the picture settings
according to a specific picture image. First, select a desired Picture Mode.
* This option is unavailable if Picture Mode is set to Vivid.
Picture Option Sets additional picture option.
Picture Reset Restores the options to the default setting.
Setting Description
Screen
(In RGB
Mode Only)
Customizes the PC display options in RGB mode.
Option
Resolution Selects a proper resolution.
Auto Configure Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when
characters are shaky, after the auto configuration.
Reset Restores the options to the default setting.
yWhen you select a picture mode, related menus are set automatically.
yWhen using the Smart Energy Saving function, the screen may look saturated in the white area of a still image.
yIf Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is disabled.
NOTE
22
ENGLISH
Setting Description
Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image.
(Function works in the following mode - HDMI-DTV)
Color Gamut Selects the range of colours that can be expressed.
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
Color Filter Filters a specific colour spectrum in RGB colours to fine-tune colour saturation and
hue accurately.
Color Temperature Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning
can be set via Gamma method, etc.
Color Management
System
This is a system that experts use when they adjust colour with a test pattern. They
can select from six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow) without
affecting other colours. For normal images, adjustments may not result in noticeable
colour changes.
Advanced Control - Picture Mode (Standard/ APS/ Sport/ Game/ Calibration)
Expert Control - Picture Mode (Cinema/ Expert1/ Expert2)
Setting Description
Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image.
Dynamic Color Adjusts color for more natural-looking colors.
Color Gamut Selects the range of colours that can be expressed.
Skin Color Skin color spectrum can be separately set to implement the skin color as defined by
the user.
Sky Color Sky color is set separately.
Grass Color Natural color spectrum (meadows, hills, etc.) can be separately set.
Gamma Sets the gradation curve according to the output of the picture signal in relation to the
input signal.
Setting Description
Noise Reduction Reduces screen noise in the video.
MPEG Noise
Reduction
Reduces noise caused by compressing digital video.
Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture
input using the degree of darkness (black level) of the screen.
Real Cinema Optimizes the screen for movie viewing.
TruMotion
(This feature
is supported
by 65SE3B and
65SE3KB only.)
Corrects images to display smoother motion sequences.
• Off : Turn off the TruMotion.
• Smooth/ Clear : De-Judder / De-Blur can be set Auto.
• User : De-Judder / De-Blur can be set manually.
- De-Judder : This function adjusts juddering of
the screen.
- De-Blur : This function adjusts and eliminates blurring of the screen.
Picture Option - HDMI(DTV) Mode
OK
TruMotion
• De-Judder Auto
• De-Blur Auto
◄
Smooth
►
23
ENGLISH
Advanced Control - Picture Mode (Standard/ APS/ Sport/ Game/ Calibration)
Expert Control - Picture Mode (Cinema/ Expert1/ Expert2)
Picture Option - HDMI(DTV) Mode
AUDIO Settings
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to AUDIO and press OK.
3 Press the navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting Description
Sound Mode Allows optimized sound for custom Monitor installation.
Level
Standard Suitable for all types of video.
News/ Music/
Cinema/ Sport/
Game
Sets audio optimized for a specific genre.
Sound Effect the user can select various sound effects.
- Sound Effect function is available only for Standard mode in Sound Mode menu.
Level
Clear Voice ll Boosts voice clarity.
Virtual Surround LG’s proprietary audio processing technology allows 5.1ch-like
surround sound from two speakers.
- If Clear Voice ll is set to On, Virtual Surround will not be
chosen.
Equalizer Adjusts the volume to a level of your choice using the Equalizer.
Balance Adjusts left/right audio balance.
Reset You can reset the settings under the Sound Effects menu.
AV Sync. Adjust Synchronizes video and audio directly when they do not match.
If you set AV Sync. to ON, you can adjust the sound output to the screen image.
Speaker: Adjusts the synchronization of the sound from the speakers. The "-" button
makes the sound output faster and the "+" button slower than the default value.
Bypass : The audio of an external device without audio delay. Audio may be output
before video as it takes time to process video input into the Monitor.
ySome models may not have built-in speakers. In that case, you need to connect external speakers to listen to sound.
NOTE
24
ENGLISH
TIME Settings
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to TIME and press OK.
3 Press the navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
yOff Time/ On Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time in the
schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the
current time.
yOnce the on or off time is set, these functions operate daily at the preset time.
yWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on
time if the set is turned on, and vice versa if the set is turned off.
yIf port 123 is blocked by a firewall, your monitor cannot receive the current time from the network.
NOTE
Setting Description
Clock Sets the time feature.
Level
Auto The current time is entered according to the selected country
when connected to a network.
Manual The current time needs to be entered manually.
On/Off Time Sets the time to turn on or off the monitor set.
Auto Off (15Min.) If Auto-off is active and there is no input signal, the set switches to off mode
automatically after 15 minutes.
Automatic Standby If the monitor is left unattended for a set period of time, it automatically goes into standby
mode.
25
ENGLISH
OPTION Settings
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to OPTION and press OK.
3 Press the navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting Description
Language Selects a language for the display text.
Country Select your country.
DivX(R) VOD Registers or releases DivX.
Checks DivX Registration Code for playing DivX-protected videos.
Register at
http://vod.divx.com
.
Uses Registration Code to rent or purchase movies at
www.divx.com/vod
.
* Rented/purchased DivX files cannot be played if the DivX Registration Code of a
different device is used. Use only the DivX Registration Code granted to this device.
* Converted files not conforming to the DivX Codec Standard may not play or may
produce abnormal images.
Initial Setting Deletes all optional settings and returns to initial default mode.
Set ID You can assign a unique Set ID NO (name assignment) to each product when several
products are connected for display. Specify the number (1 to 255 or 1 to 1,000) using the
button and exit. Use the assigned Set ID to individually control each product using the
Product Control Program.
Tile Mode Tile Mode To use this function
- Must be displayed with various other products.
- Select Tile Mode, set rows and columns, and then enter the tile ID to
set the location.
- Tile Mode: row x column (row = 1-15, column = 1-15).
- 15 x 15 available.
Auto Config. Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position Moving the screen position horizontally and vertically.
Size Adjust the horizontal and vertical size of the screen taking into
account the size of the bezel.
Natural The image is omitted by the distance between the screens to be
naturally shown.
Reset Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen
returns to Full screen.
26
ENGLISH
SETTINGS Description
Contents Schedule Creates simple schedules and sets playback using files in My Media.
Level
Add Schedule Creates a contents schedule.
- Media: Select the file to which you want to apply the contents
schedule.
- Select [Create] to register the contents schedule.
Play Plays a contents schedule.
Delete All Deletes all registered schedules.
yInformation about registered schedules is stored on your USB storage device.
This feature does not work when your USB storage device has been removed.
yThe picture size is 1920 x 1080.
yYou can use photo and video files only.
yYou can add up to 50 files (photo files + video files = 50).
yOnly photos whose resolution is 1920 x 1080 or below are supported.
yThe default display time for photos is 1 minute. Playback time for movies
differs depending on the running time.
yYou can create up to 7 schedules.
yYou cannot register a schedule when no file has been selected.
yContents schedules that have had information forcibly modified using a PC,
etc. may not function properly.
yWith respect to the playback of distribution or contents schedules through
SuperSign Software, the schedule executed last time is played.
NOTE
27
ENGLISH
Tile Mode
This monitor can be tiled with additional monitors to create a large tiled display.
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors
is omitted.
ID 1 ID 2
ID 5 ID 6
ID 3
ID 7
ID 9 ID 10 ID 11
ID 4
ID 8
ID 12
ID 13 ID 14 ID 15 ID 16
ID 1 ID 2
ID 6 ID 7
ID 3
ID 8
ID 11 ID 12 ID 13
ID 4 ID 5
ID 9 ID 10
ID 14 ID 15
ID 16
ID 21
ID 17
ID 22
ID 18
ID 23
ID 19
ID 24
ID 20
ID 25
5X5
When using 25 monitors
4X4
When using 16 monitors
ID 1 ID 2
ID 3 ID 4
ID 1 ID 2
ID 4 ID 5
ID 3
ID 6
ID 7 ID 8 ID 9
3X3
When using 9 monitors
Off
When the Tile Mode
option is disabled
1X2
When using 2 monitors
2X2
When using 4 monitors
ID 1 ID 2
Tile ID
Before After
28
ENGLISH
NETWORK Settings
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and press OK.
3 Press the navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting Description
Network Setting Configure the network settings.
Network setting When the Wi-Fi dongle is connected, you can view and connect to
any available wireless network.
Network Status Display the network status.
Setting Description
Setting from the AP list Select an AP to connect to a wireless network.
Simple setting
(WPS-button mode)
Press the button on the wireless router that supports PBC to easily connect
to the router.
Network Connection Options
29
ENGLISH
IR CODES
yAll models do not support the HDMI/USB function.
ySome key codes are not supported depending on the model.
Code (Hexa) Function Note
08 Power R/C BUTTON
0B INPUT R/C BUTTON
C4 MONITOR ON R/C BUTTON
C5 MONITOR OFF R/C BUTTON
95 ENERGY SAVING ( ) R/C BUTTON
DC 3D R/C BUTTON
10 to 19 Number Key 0 to 9 R/C BUTTON
53 1/a/A R/C BUTTON
2F CLEAR R/C BUTTON
02 Volume R/C BUTTON
03 Volume R/C BUTTON
79 ARC R/C BUTTON
99 AUTO R/C BUTTON
09 MUTE R/C BUTTON
E0 BRIGHTNESS (Page UP) R/C BUTTON
E1 BRIGHTNESS (Page Down) R/C BUTTON
4D PSM R/C BUTTON
AA INFO R/C BUTTON
5F W.BAL R/C BUTTON
43 SETTINGS R/C BUTTON
40 Up R/C BUTTON
41 Down R/C BUTTON
07 Left R/C BUTTON
06 Right R/C BUTTON
3F S.MENU R/C BUTTON
44 OK R/C BUTTON
28 BACK R/C BUTTON
5B EXIT R/C BUTTON
7E R/C BUTTON
7B TILE (Tile Mode) R/C BUTTON
B1 R/C BUTTON
B0 R/C BUTTON
BA R/C BUTTON
30
ENGLISH
Code (Hexa) Function Note
8F R/C BUTTON
8E R/C BUTTON
72 Red Key (PICTURE ID ON) R/C BUTTON
71 Green Key (PICTURE ID OFF) R/C BUTTON
63 Yellow Key R/C BUTTON
61 Blue Key R/C BUTTON
31
ENGLISH
TO CONTROL MULTIPLE PRODUCTS
yUse this method to connect several products to a single PC. You can control several products at a time by connecting
them to a single PC.
yIn the Option menu, Set ID must be between 1 and 255 (or from 1 to 1,000) without being duplicated.
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
yThe RS-232C protocol is used for communication between the PC and product. You can turn the product on or off,
select an input source or adjust the OSD menu from your PC.
Monitor 1 Monitor 2 Monitor 3Monitor 4
PC
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C Gender
4P Cable
(not included)
RS-232C Cable
(not included)
32
ENGLISH
Communication Parameter
•Baud Rate : 9600 BPS
•Data Length : 8 bit
•Parity Bit : None
•Stop Bit : 1 bit
•Flow Control : None
•Communication Code : ASCII code
•Use a crossed (reverse) cable
RS-232C Configurations
8-Wire Configurations (Standard RS-232C cable)
PC RS-232C
Gender
DCD
RXD
TXD
GND
DTR
DSR
RTS
CTS
DCD
TXD
RXD
GND
DSR
DTR
CTS
RTS
1
2
3
5
4
6
7
8
1
3
2
5
6
4
8
7
D-Sub 9 D-Sub 9
(Female) (Female)
RS-232C Cable
•When using three-wire connections (non-
standard), an IR daisy chain cannot be used.
•If you want to control multiple units
simultaneously, use 3.5 mm 4-pole cables (sold
separately).
4P Cable
4-Wire Configurations (Standard RS-232C cable)
Set Set
NOTE
RXD
TXD
GND
IR
TXD
RXD
GND
IR
33
ENGLISH
Command Reference List
COMMAND
DATA
(Hexadecimal)
1 2
01 Power k a 00 to 01
02 Select input x b See [Select input]
03 Aspect ratio k c See [Aspect ratio]
04 Energy saving j q See [Energy saving]
05 Picture mode d x See [Picture mode]
06 Contrast k g 00 to 64
07 Brightness k h 00 to 64
08 Sharpness k k 00 to 32
09 Color k i 00 to 64
10 Tint k j 00 to 64
11 Color temperature x u 00 to 64
12 H position f q 00 to 64
13 V position f r 00 to 64
14 H size f s 00 to 64
15 Auto Config. j u 01
16 Balance k t 00 to 64
17 Sound Mode d y See [Sound mode]
18 Mute k e 00 to 01
19 Volume k f 00 to 64
20 Clock 1 (year/month/day) f a See [Clock 1]
21 Clock 2 (hour/minute/second) f x See [Clock 2]
22 Off time schedule f c 00 to 01
23 On time schedule f b 00 to 01
24 Off timer (repeat mode/time) f e See [Off timer]
25 On timer (repeat mode/time) f d See [On timer]
26 On timer input f u See [On timer input]
27 Automatic Standby m n 00 to 01
28 Auto off f g 00 to 01
29 Language f i See [Language]
30 Reset f k 00 to 02
31 Current temperature d n FF
32 Key m c See [Key]
33 Time elapsed d l FF
34 Product serial number f y FF
34
ENGLISH
yDuring USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c) are not executed and
treated as NG.
ySome commands are not supported depending on the model.
yThe ‘f f’ command which shows the status of a certain command does not display the OSD as the result in order to be
compatible with SuperSign program.
COMMAND
DATA
(Hexadecimal)
1 2
35 Software version f z FF
36 White balance red gain j m 00 to FE
37 White balance green gain j n 00 to FE
38 White balance blue gain j o 00 to FE
39 Backlight m g 00 to 64
40 Screen off k d 00 to 01
41 Tile Mode d d See [Tile Mode]
42 Tile Mode Check d z FF
43 Tile ID d i Refer to ‘Tile ID'.
44 Tile H Position d e 00 to 32
45 Tile V Position d f 00 to 32
46 Tile H Size d g 00 to 32
47 Tile V Size d h 00 to 32
48 Natural Mode (In Tile mode) d j 00 to 01
NOTE
35
ENGLISH
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1] Identifies the factory setting and the user setting modes.
* [Command2] Controls monitors.
* [Set ID] Used for selecting a set you want to control. A Set ID can be assigned to each set from 1
to 255 (from 01H to FFH), or from 1 to 1,000 (from 001H to 3e8H) in certain models, under
OPTION in the OSD menu. Selecting '00H' or '000H' for Set ID allows the simultaneous control
of all connected monitors. (It may not be supported depending on the model.)
* [Data] Transmits command data.
Data count may increase depending on the command.
* [Cr] Carriage Return. Corresponds to '0x0D' in ASCII code.
* [ ] White Space. Corresponds to '0x20' in ASCII code.
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* The Product transmits an ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data
of the PC computer.
* If a command is sent with Set ID '00' (=0x00) or '000 (=0x000)', the data is reflected to all monitor sets and
they do send any acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands may not be supported on some models.
36
ENGLISH
01. Power (Command: k a)
Controls the power on/off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the monitor is fully powered on, the
acknowledgement signal is returned properly.
* There may be a delay between the transmission and
acknowledgement signals.
02. Select input (Command: x b)
Selects an input signal.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 60: RGB
70: DVI-D (PC)
80: DVI-D (DTV)
90: HDMI (HDMI1) (DTV)
A0: HDMI (HDMI1) (PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported on some models.
03. Aspect ratio (Command: k c)
Adjusts the aspect ratio.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
02: 16:9
04: Zoom (HDMI)(DTV)
06: Auto ratio (HDMI)(DTV)
09: Original (≥ 720p) (HDMI) (DTV)
10 to 1F: Cinema zoom 1 to 16 (HDMI) (DTV)
* Available data types differ depending on the input signal. For more
information, see the aspect ratio section of the owner's manual.
* The aspect ratio may differ depending on the model's input
configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
04. Energy saving (Command: j q)
Sets the energy saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Minimum
02: Medium
03: Maximum
04: Automatic
05: Screen off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** This may not be supported on some models.
05. Picture mode (Command: d x)
Selects a picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data 00: Vivid
01: Standard
02: Cinema
03: Sport
04: Game
05: Expert 1
06: Expert 2
08: Eco
11 : Calibration
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
Adjusts the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
37
ENGLISH
07. Brightness (Command: k h)
Adjusts the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
Adjusts the screen sharpness.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 32: Sharpness 0 to 50
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
Adjusts the screen color.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
Adjusts the screen tint.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint red 50 to green 50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color temperature (Command: x u)
Adjusts the screen color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. H position (Command: f q)
Adjusts the horizontal position of the screen.
This function is only available when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution.
(Only available in RGB-PC input mode)
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Min -50 (left) to max 50 (right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
38
ENGLISH
13. V position (Command: f r)
Adjusts the vertical position of the screen.
This function is only available when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution.
(Only available in RGB-PC input mode)
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Min -50 (down) to max 50 (up)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H size (Command: f s)
Adjusts the horizontal size of the screen.
This function is only available when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution.
(Only available in RGB-PC input mode)
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Min -50 (small) to max 50 (large)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Config. (Command: j u)
Automatically corrects position and shaking of the picture.
(Only available in RGB-PC input mode)
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01: Execution
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
Adjusts the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
17. Sound mode (Command: d y)
Selects a sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data 01: Standard
02: Music
03: Cinema
04: Sport
05. Game
07. News
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Mute (Command: k e)
Mutes/unmutes the sound.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00: Mute
01: Unmute
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
39
ENGLISH
19. Volume (Command: k f)
Adjusts the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
20. Clock 1 (year/month/day) (Command: f a)
Adjusts the Clock 1 (year/month/day) value.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 14: Year 2010 to 2040
Data2 01 to 0C: January to December
Data3 01 to 1F: 1st to 31st
* Enter "fa [Set ID] ff" to view the Clock 1 (year/month/day)
settings.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. Clock 2 (hour/minute/second) (Command: f x)
Adjusts the Clock 2 (hour/minute/second) value.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter "fa [Set ID] ff" to view the Clock 2 (hour/minute/second)
settings.
** This function is only available when Clock 1 (year/month/
day) is set.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
22. Off time schedule (Command: f c)
Enables/disables the on time schedule.
Transmission
[f][c][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
23. On time schedule (Command: f b)
Enables/disables the on time schedule.
Transmission
[f][b][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
40
ENGLISH
24. Off timer (repeat mode/time) (Command: f e)
Configures the off time (repeat mode/time) settings.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 to F7 (reading data)
F1: Read the 1st off timer data
F2: Read the 2nd off timer data
F3: Read the 3rd off timer data
F4: Read the 4th off timer data
F5: Read the 5th off timer data
F6: Read the 6th off timer data
F7: Read the 7th off timer data
2. E1 to E7 (deleting one index), E0 (deleting all indexes)
E0: Erase all off timer setting
E1: Erase the 1st off timer setting
E2: Erase the 2nd off timer setting
E3: Erase the 3rd off timer setting
E4: Erase the 4th off timer setting
E5: Erase the 5th off timer setting
E6: Erase the 6th off timer setting
E7: Erase the 7th off timer setting
3. 01 to 0C (setting the day of the week for off timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2 00 to 17: 00 to 23 hours
Data3 00 to 3B: 00 to 59 minutes
* To read or delete the Off Time list, set FFH for [Data2] and
[Data3].
Example 1: fe 01 f1 ff ff - Read the 1st index data from off timer.
Example 2: fe 01 e1 ff ff - Delete the 1st index data from off
timer.
Example 3: fe 01 04 02 03 - Sets Off Timer to 02:03 for Monday-
Saturday.
* This function is only available when Clock 1 (year/month/day)
and Clock 2 (hour/minute/second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
25. On timer (repeat mode/time) (Command: f d)
Configures the on time (repeat mode/time) settings.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 to F7 (reading data)
F1: Read the 1st on timer data
F2: Read the 2nd on timer data
F3: Read the 3rd on timer data
F4: Read the 4th on timer data
F5: Read the 5th on timer data
F6: Read the 6th on timer data
F7: Read the 7th on timer data
2. E1 to E7 (deleting one index), E0 (deleting all indexes)
E0: Erase all on timer setting
E1: Erase the 1st on timer setting
E2: Erase the 2nd on timer setting
E3: Erase the 3rd on timer setting
E4: Erase the 4th on timer setting
E5: Erase the 5th on timer setting
E6: Erase the 6th on timer setting
E7: Erase the 7th on timer setting
3. 01 to 0C (setting the day of the week for the on timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2 00 to 17: 00 to 23 hours
Data3 00 to 3B: 00 to 59 minutes
* To read or delete an on timer list you have set, [Data2][Data3]
must be set to FFH.
Example 1: fd 01 f1 ff ff - Read the 1st index data from on timer.
Example 2: fd 01 e1 ff ff - Delete the 1st index data from on
timer.
Example 3: fd 01 04 02 03 - Set on timer at 02:03 on Monday to
Saturday.
* This function is only available when Clock 1 (year/month/day)
and Clock 2 (hour/minute/second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
41
ENGLISH
26. On timer input (Command: f u)
Adds a new schedule entry by selecting input for the current on
timer setting.
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
Data (adding schedule)
60: RGB
70: DVI-D
90: HDMI (HDMI1)
Data1
1. f1h to f7h (reading data)
F1: Select the 1st schedule input source
F2: Select the 2nd schedule input source
F3: Select the 3rd schedule input source
F4: Select the 4th schedule input source
F5: Select the 5th schedule input source
F6: Select the 6th schedule input source
F7: Select the 7th schedule input source
Data2
1. ffh (reading data)
To read the schedule input, enter FFH for [Data2].
If no schedule is available for [Data1] when attempting to read
or change the schedule data, the text NG will be displayed and
the operation will fail.
(Example 1: fu 01 60 - Move existing schedule entries down
one row each and save RGB as input source for the 1st schedule
entry.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input data.)
* This function is only supported when 1 (year/month/date), 2
(hour/minute/second) and On Time (repeat mode/time) are set.
** Input may not be supported on some models.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
27. Automatic standby (Command: m n)
Configures the automatic standby settings.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off (Will not turn off after 4/6/8 hours)
01: 4 hours (Off after 4 hours)
02: 6 hours (Off after 6 hours)
03: 8 hours (Off after 8 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
28. Auto off (Command: f g)
Configures the automatic off settings.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00: Off (Will not turn off after 15 minutes)
01: On (Off after 15 minutes)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
29. Language (Command: f i)
Sets the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data 00: Czech
01: Danish
02: German
03: English
04: Spanish (Europe)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Cantonese)
11: Japanese
12: Chinese (Mandarin)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
42
ENGLISH
30. Reset (Command: f k)
Resets settings for Picture, Screen and Audio or restores factory
settings.
(Screen reset can only be performed in RGB input mode.)
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00: Picture reset
01: Screen reset
02: Initial settings (factory reset)
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
31. Current temperature (Command: d n)
Checks the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
* Temperature is displayed as a hexadecimal value.
32. Key (Command: m c)
Sends a key code for the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For key codes, see IR Codes.
* Some key codes may not be supported on some models.
33. Time elapsed (Command: d l)
Checks the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data received is shown as a hexadecimal value.
34. Product serial number (Command: f y)
Checks the serial number of the product.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is in ASCII code.
35. Software version (Command: f z)
Checks the software version of the product.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
43
ENGLISH
36. White balance red gain (Command: j m)
Adjusts the white balance red gain value.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
37. White balance green gain (Command: j n)
Adjusts the white balance green gain value.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green gain 0 to 254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
38. White balance blue gain (Command: j o)
Adjusts the white balance blue gain value.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue gain 0 to 254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
39. Backlight (Command: m g)
Adjusts the back light brightness.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Back light brightness 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
** This may not be supported on some models.
40. Screen off (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Turns the screen on
01: Turns the screen off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
41. Tile Mode (Command: d d)
To set a Tile Mode and Tile Column/ Row values.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column
*00, 01, 10, 11 means Tile Mode Off
** It may not be supported depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
44
ENGLISH
42. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Check Tile Mode status.
** It may not be supported depending on the model.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1 00: Tile Mode Off
01: Tile Mode On
Data2 00 to 0F: Tile Row
Data3 00 to 0F: Tile Column
43. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile Row).
** It may not be supported depending on the model.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
*NG will be return if data is over (Tile Column) x (Tile Row),
except 0xFF.
44. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural option of the
Tile Mode is set to Off while the Tile Mode set to On.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: -50 (Left) to 0 (Right)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
45. Tile V Position (Command: d f)
To adjust the Tile Vertical position.
* This function is available only when the Natural option of the
Tile Mode is set to Off while the Tile Mode set to On.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
46. Tile H Size (Command: d g)
To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H Size.
* This function is available only when the Natural option of the
Tile Mode is set to Off while the Tile Mode set to On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
47. Tile V Size (Command: d h)
To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V Size.
* This function is available only when the Natural option of the
Tile Mode is set to Off while the Tile Mode set to On.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
45
ENGLISH
48. Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image that would
normally be displayed in the gap between the monitors is
omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
