Table of Contents
LG 55TC3CD-B User Manual
Displayed below is the user manual for 55TC3CD-B by LG which is a product in the Signage Displays category. This manual has pages.
Related Manuals
ENGLISH
2
TABLE OF CONTENTS
SAFETY PRECAUTIONS ................3
- Electrical Power Related Precautions ....................3
- Precautions for installing the Product ..................5
- Precautions for Moving the Product ...................... 6
- Precautions for Using/Cleaning the Product ..... 7
- Product Disposal (Only, Hg lamp used LCD
Monitor) ................................................................................. 7
LICENSES .......................................8
ASSEMBLY AND PREPARATION ..9
- Optional Accessories ....................................................10
- Parts and Buttons .........................................................11
- Connecting the Speakers ..........................................12
- Connecting the IR Sensor .........................................14
- Installing on a Wall ........................................................16
REMOTE CONTROL .................... 18
MAKING CONNECTIONS ........... 20
- Connecting to a PC.......................................................20
- External Device Connection .....................................20
- Using the Input List ......................................................22
TROUBLESHOOTING .................. 23
PRODUCT SPECIFICATIONS ...... 27
ENGLISH
3
WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
SAFETY PRECAUTIONS
Please read these safety precautions carefully before using the product.
WARNING
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
WARNING
•Indoor Use Only.
Electrical Power Related Precautions
WARNING
•Use only the power cord supplied with the unit or another manufacturer’s authorized cord.
- Failure to do so may result in fire or electrical shock or damage to the product.
•Use only a properly grounded plug and receptacle.
- If you do not you may be electrocuted or injured. Or the product might be damaged.
•Do not use a damaged or loose plug.
- This may cause electrical shock or fire.
•Operate the display only from a power source(i.e. voltage) indicated in the product specification.
- Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of
power supply you have, consult a certified electrician.
•In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very
dangerous.
- It can cause electric shock.
•Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power strip
with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
•Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power
plug completely or wipe dust off before plugging in the cord.
- You may be electrocuted due to excess moisture.
ENGLISH
4
•If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Layers of dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
•Insert the power plug firm so it cannot come loose.
- A loose connection can cause fire.
•Hold the plug when pulling out the power cable. Do not pull the plug out by the wire. Do not bend the power cord
with excessive force or put heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
•Do not insert metal or other conductive materials into the product openings. Additionally, do not touch the power
cable right after plugging into the wall input terminal.
- You may be electrocuted.
•Use an appliance coupler as a disconnect device.
•Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily
accessible.
•Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
•As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the
unit is turned off.
ENGLISH
5
Precautions for installing the Product
WARNING
•Keep away from heat sources like heaters or open flames.
- Electrical shock, fire, malfunction or deformation may occur.
•Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
•Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Prevent Children from climbing or pulling on the unit.
•Do not leave the power or signal cable where someone can trip over it.
- Pedestrians may become entangled in the cables and cause the device to become damaged causing electrical shock,
fire, or serious injury.
•Install the product in a neat and dry place. Do not use near water.
- Dust or moisture can cause electrical shock, fire or product damage.
•Do not add accessories that have not been designed for this display.
•If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact LG
Customer Service.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
•If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact LG Customer
Service.
•Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product.
- It can cause injury to humans, problems to the product and damage the display.
•Keep out of reach of children and do not place toys near the product.
•Make sure the product ventilation hole is not blocked. Install the product more than 100 mm (3.9 inches) from the
wall.
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat build-
up.
•Do not cover the product with cloth or other material (eg. plastic) while plugged in.
- The product can be deformed or fire can break out due to internal overheating.
•Place the product on a flat and stable surface that is large enough to support the product.
- If the product is dropped, you may be injured or the product may be broken.
•Install the product where no Electromagnetic Interference occurs.
•Keep the product away from direct sunlight.
- The product can be damaged.
•Do not place the product on the floor.
- Small Children and others may trip over it.
•Do not install this product on a wall if it could be exposed to oil or oil mist.
- This may damage the product and cause it to fall.
•For displays with glossy bezels the user should consider the placement of the display as the bezel may cause
unwanted reflections from surrounding light and bright surfaces.
ENGLISH
6
Precautions for Moving the Product
WARNING
•Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
•Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
•When lifting or moving the product, do not hold it upside down while holding only the stand.
- This may cause the product to fall resulting in damage or injury.
•Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
•Make sure the panel faces forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire.
•Do not place the product face down.
- This may damage the TFT-LCD screen.
ENGLISH
7
Precautions for Using/Cleaning the Product
WARNING
•Do not attempt to disassemble, repair or modify the product yourself.
- Fire or electric shock can occur.
- Contact LG Customer Service for repair.
•When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not
clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not
use chemicals such as benzene, paint thinners or alcohol.)
•Keep the product away from water.
- Fire or electric shock accident can occur.
•Avoid high temperatures and humidity.
•Do not put or store flammable substances near the product.
- There is a danger of explosion or fire.
•Keep the product clean at all times.
•Take a comfortable and natural position when working with the product.
•Take a regular break when working with the product for a long time.
•Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
•Keep proper distance from the product and rest from time-to-time.
- Your vision may be impaired if you look at the product too closely or for too long.
•Set the appropriate resolution by referring to the User’s Guide.
•Keep small accessories out of the reach of children.
•Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor screen. To
avoid this problem, use a screen saver and power off when this product is not used. Persistent image or stain caused
by long time usage are not covered by the warranty on this product.
•Do not use products using high voltage around the Monitor. (ex. Electrical Swatter)
- Monitor may have malfunction as its electrical shock.
•Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only. Too much
moisture may cause staining.
WATER CHEMICALS
Product Disposal (Only, Hg lamp used LCD Monitor)
•The fluorescent lamp used in this product contains a small amount of mercury.
•Do not dispose of this product with general household waste.
•Disposal of this product must be carried out in accordance to the regulations of your local authority.
ENGLISH
8
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD,
the Symbol, & DTS or DTS-HD and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights
Reserved.
ENGLISH
9
ASSEMBLY AND PREPARATION
CAUTION
•Always use genuine components to ensure safety and product performance.
•The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
•The accessories provided with your product may vary depending on the model or region.
•Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
•SuperSign Software & Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model.
•The warranty will not cover any damage caused by using the product in an excessively dusty environment.
ENGLISH
10
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories
may be added. The illustrations in this manual may differ from the actual product and accessories.
Media Player kit
Media Player(MP500/ MP700) Screws CD (Owner's Manual)/ Cards
OPS kit
KT-OPSA Screws Connecting Cable
Card (Easy Setup Guide) Power Cord
Pixel sensor kit Wi-FI Dongle kit Speaker
KT-SP0 AN-WF500 SP-5200
NOTE
•Optional accessories are available for some models. If necessary, please purchase them separately.
•Pixel sensor is sold separately. You can obtain additional accessories from your local retail store.
•Before you attach the OPS kit or Media Player, connect the cable to the port.
•Please turn off the power before connecting or removing Optional accessories.
ENGLISH
11
Parts and Buttons
The image may be different according to the model.
Buttons
•: Adjusts up and down.
•: Moves left and right.
•: Displays the current signal and mode.
•: Accesses the main menus, or saves your input and exits the menus.
•: Change the input signal.
•: Turns the power on or off.
ENGLISH
12
Connecting the Speakers
- For certain models only.
- The image may be different according to the model.
1 Connect an input signal cable before installing the speakers.
2 Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a
connection.
Landscape Portrait
ENGLISH
13
3 Then connect the speaker cable. After installing your speakers, organize the speaker cables.
Landscape Portrait
NOTE
•Please turn off the power before removing the cable. Connecting or removing the speaker cable while turned on may
result in no sound.
ENGLISH
14
Connecting the IR Sensor
This allows a remote control sensor to be placed in a custom location. The IR receiver is made with a magnet. Attach
the magnetic sheet to the desired position on the product. It is recommended to attach it to the location illustrated in
the figure below.
Basic installation
Portrait Layout
When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen).
Using Kensington Lock
(This is not available for all models.)
The Kensington security system connector is located at the back of the monitor. For more information on installation
and use of this system, refer to the manual provided with the Kensington security system or visit http://www.
kensington.com.
Connect the Kensington security system cable between the monitor and a table.
ENGLISH
15
NOTE
•The Kensington security system is optional. You can obtain additional accessories from most electronics retail stores.
•The illustration shows a general example of installation and may look different from the actual product.
ENGLISH
16
Installing on a Wall
For proper ventilation, allow a clearance of 100 mm (3.9 inches) on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
100 mm (3.9 inches)
100 mm
100 mm
100 mm 100 mm
To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1 Use only screws and wall mounting brackets that conform to VESA standards.
2 Screws which are longer than standard length may damage the inside of the monitor.
3 A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for
any accidents related to the use of non-standard screws.
4 Please use VESA standard as below.
•785 mm (30.9 inches) and above
* Fixing screws: Diameter 6.0 mm (0.2 inches) x Pitch 1.0 mm (0.03 inches) x Length 12 mm (0.47 inches)
785 mm (30.9 inches)
ENGLISH
17
CAUTION
•Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
•If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount
and contact your local dealer or qualified personnel to assist with the installation.
•Do not over tighten the screws as this may damage the monitor and void your warranty.
•Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by misuse
or use of improper accessories are not covered by the warranty.
NOTE
•The wall mount kit includes the installation guide and all necessary parts.
•The wall mounting bracket is optional. You can obtain additional accessories from your local dealer.
•The length of screws required may differ depending on the wall mount. Be sure to use the correct length.
•For more information, please refer to the guide provided with the wall mount.
ENGLISH
18
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to
use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and
terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the
installation actions in reverse. The illustrations may differ from the actual accessories.
CAUTION
•Do not mix old and new batteries, as this may damage the remote control.
•Be sure to point the remote control toward the remote control sensor on the monitor.
•Some features of the remote control may not be supported in certain models.
",#
(POWER) Turns the monitor on or off.
Turns the monitor on.
Turns the monitor off.
Adjusts the brightness of the picture to
reduce energy consumption.
Selects the input mode.
Used for viewing 3D videos.
Toggles between numerical and alphabetical.
Number and Alphabet buttons
Enters numerical or alphabetical characters depending
upon the setting.
Deletes the entered numerical or alphabetical
character.
Volume Up/Down Button Adjusts the volume.
Selects the Aspect Ratio mode.
Automatically adjusts picture position and
minimizes image instability (available for RGB input only).
Mutes all sounds.
Adjusts the brightness of the display. PAGE function
is not supported in this model.
ENGLISH
19
Selects the Picture Mode.
Activates the Launcher.
Enters the White Balance menu.
Accesses the main menus or saves your input and exit
menus.
SuperSign menu key.
Navigation Buttons Scrolls through menus or options.
Selects menus or options and confirms your input.
Allows you to move back one step in the user
interaction function.
Quit all OSD tasks and applications.
Allows you to control various multimedia
devices to enjoy multimedia simply by using the remote
control through the SimpLink menu.
Selects the TILE Mode.
When the Picture ID number
matches the Set ID number, you can control whichever
monitor you want in multi-display format.
USB Menu Control Buttons Controls media playback.
ENGLISH
20
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external device you
want to connect. For more information about external device connections, see the user manual provided with each
device.
Connecting to a PC
Some of the cables are not provided.
This monitor supports the Plug and Play* feature.
* Plug and Play: a feature that enables a PC to recognize devices attached by the user without device configuration or
user intervention when powering up.
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Some of the cables are not provided. For the best picture and sound quality, connecting external devices to your
monitor using HDMI cables is recommended.
ENGLISH
21
NOTE
•For the best image quality, using the monitor with HDMI connection is recommended.
•To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as DVI-D/HDMI
cable.
•If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
•Sometimes red, green, or blue spots may appear on the screen. This is normal.
•Use a High Speed HDMI®/TM cable.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•Recommended HDMI Cable Types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
•If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change
the default audio output to HDMI.
•If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
•You may experience compatibility issues if you use HDMI-PC mode.
•Make sure the power cable is disconnected.
•If you connect a gaming device to the monitor, use the cable provided with the gaming device.
•It is recommended to use the speakers that are provided as optional accessories.
•High Speed HDMI®/TM cables transmit a HD signal up to 1080p and higher.
•Please turn off the power before removing the cable. Connecting or removing the speaker cable while turned on may
result in no sound.
CAUTION
•Connect the signal input cable and tighten it by turning the screws clockwise.
•Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a screensaver if
possible.
•A wireless communication device near your monitor can affect the image.
ENGLISH
22
Using the Input List
→
•HDMI1 → HDMI2 → OPS/DVI-D → DISPLAYPORT
ENGLISH
23
TROUBLESHOOTING
No image is displayed.
Problem Action
Is the product power cord connected? •Check if the power cord is correctly plugged into the power outlet.
Does the “Invalid Format” message
appear?
•The signal from the PC (Graphics card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency range
by referring to the Specifications in this manual.
Does the “No Signal” message appear? •The signal cable between PC and product is not connected. Check the
signal cable.
•Press the INPUT menu in the remote control to check the input signal.
The Unknown Product message appears when the product is connected.
Problem Action
Did you install the driver? •Check if the Plug and Play function is supported by referring to the
graphics card user manual.
The screen image looks abnormal.
Problem Action
Is the screen position wrong? •Check if the graphics card resolution and frequency are supported by
the product. If the frequency is out of range, set to the recommended
resolution in the [Control Panel] → [Display] → [Setting] menu. (The
settings may differ depending on your operating system.)
The screen is displayed abnormally. •The proper input signal is not connected to the signal port. Connect the
signal cable that matches with the source input signal.
ENGLISH
24
After-image appears on the product.
Problem Action
After-image appears when the product is
turned off.
•If you use a fixed image for a long time, the pixels may be damaged.
Use the screen-saver function.
•When a dark image is displayed on the screen after an image with high
contrast (black and white or gray), this may cause image sticking. This
is normal for LCD screen products.
The audio function does not work.
Problem Action
No sound? •See if the audio cable is connected properly.
•Adjust the volume.
•See if the sound is set properly.
Sound is too dull. •Select the appropriate equalizer sound.
Sound is too low. •Adjust the volume.
Screen color is abnormal.
Problem Action
Screen has poor color resolution (16
colors).
•Set the number of colors to more than 24 bits (true color). Select
[Control Panel] → [Display] → [Settings] → [Color Table] in Windows.
(The settings may differ depending on your operating system.)
Screen color is unstable or mono-colored. •Check the connection status of the signal cable. Or, re-insert the PC
graphics card.
Do black spots appear on the screen? •Several pixels (red, green, blue, white, or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. This is not a malfunction of the LCD.
The operation does not work normally.
Problem Action
The power suddenly turned off. •Is the Timer set?
•Check the power control settings. Power interrupted.
ENGLISH
25
I have a problem with touch response.
Problem Action
Touch does not respond. •Remove the USB cable and connect it again in 10 seconds.
•Check the USB cable connection.
- This may occur when the USB cable between PC and monitor is not
connected. Check the USB cable and make it firmly connected. * Check the
connection on Windows 8.x / 10 , Linux kernel above v3.0 Control Panel >
System and Security > System
-Check the number of touch-points supported under Pen and Touch.
•Check the PC power.
- This may occur when the PC is powered off. Make sure that your PC’s power
cord is firmly plugged into a power outlet.
• Restart your PC.
- Touch may not respond when the system is down due to the unstable
network. Reconnect the LAN cable or restart your PC.
• Check the signal cable connection.
- If your PC and monitor are not connected using a signal cable, touch does not
respond. Check the signal cable connection.
•Check the monitor power.
- Touch may not respond when the monitor is powered off.
•Check if the screen is currently on.
The location of a touch does
not correspond to the touch
coordinates.
•Change your tablet PC settings (Windows 8.x / 10 , Linux kernel above v3.0).
- This may occur when the touch screen is not calibrated properly. Control
Panel> Hardware and Sound > Tablet PC Settings > Display > Display options
>Calibrate or Reset * For information about gestures and settings on Windows
8.x / 10 , Linux kernel above v3.0, refer to the Windows / Linux Help.
A touch is applied to a monitor
other than the one I intended.
•Set the monitor as the default monitor.
- This may occur if the monitor is not set as the default monitor when you are
using multiple monitors. Go to Control Panel > Display > Settings tab > Select
the monitor > Use this device as the primary monitor (U) > Apply (A)
•Change your tablet PC settings (Windows 8.x / 10 , Linux kernel above v3.0).
- This may occur when the touch screen is not calibrated properly. Go to Control
Panel > Hardware and Sound > Tablet PC Settings > Display > Display options >
Calibrate or Reset
I cannot use 40 touch points in
Windows 8.x / 10 , Linux kernel
above v3.0
•Make sure that you use a content that supports up to 40 touch points.
- The content played (e.g. Flash Player, Paint, etc.) may not support 40 touch
points.
•Remove the USB cable and connect it again in 10 seconds.
•Run the content (e.g. Flash Player, Paint, etc.) again.
•Restart your PC.
•If the gap between two touch points is 20 mm (0.7 inches) in or less, the
touch error may occur.
•On the edge of the touch screen, 40 touch points may work unstably.
ENGLISH
26
CAUTION
•Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an
extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood
of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
every 12 hours at the very minimum; if done more frequently, the prevention of image sticking is more effective.
Recommended operating conditions
1 Change the background and the character colors using the same time interval.
ID: UPM 123
PW: **** ID: UPM 123
PW: ****
When changing colors, using complementary colors helps to prevent image sticking.
BM BM BM
CFCFCF
OC
PI
PI
TFT Layers
Glass
Glass
LC
CF
ITO or MoTi Pixel Layer
2 Change the image using the same time interval.
Make sure that the characters or images before changing the image remain in the same location after changing the
image.
What is image sticking?
When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between
the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over
time, liquid crystals have a tendency to remain aligned in one direction. During this process, a previously displayed image
remains visible. This phenomenon is referred to as image sticking.
ENGLISH
27
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions.
“ ” refers to alternating current (AC), and “ ” refers to direct current (DC).
LCD screen Screen type Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Pixel pitch 0.315 mm (H) x 0.315 mm (V)
Video signal Maximum resolution DVI-D/OPS: 1920 × 1080 @ 60 Hz
HDMI1/HDMI2/Displayport: 3840 x 2160 @ 60 Hz
- This may not be supported on some OS or graphics card
types.
Recommended resolution DVI-D/OPS: 1920 × 1080 @ 60 Hz
HDMI1/HDMI2/Displayport: 3840 x 2160 @ 60 Hz
- This may not be supported on some OS or graphics card
types.
Horizontal frequency DVI-D/OPS: 30 kHz to 83 kHz
HDMI1/HDMI2/Displayport: 30 kHz to 135 kHz
Vertical frequency 30 Hz to 60.31 Hz
Synchronization Separate Sync, Digital
Input/output ports SPEAKER OUT, HDMI1, HDMI2, LAN, IR & BRIGHTNESS
SENSOR, DP IN/OUT, DVI-D IN, SD, USB 2.0 IN & USB 3.0 IN,
AUDIO IN/OUT, RS-232C IN/OUT, OPS, TOUCH USB
Embedded battery Applied
Power Rated power AC 100-240 V ~ 50/60 Hz 1.4 A
Power consumption On Mode: 116 W (Typ.)
Sleep Mode: ≤ 0.5 W
Sleep Mode(Energer Star): ≤ 0.7 W
Off Mode: ≤ 0.5 W
Audio RMS Audio Output 10 W + 10 W (R + L)
Input Sensitivity 0.7 Vrms
Speaker Impedance 6 Ω
Environmental
Conditions
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity 10 % to 80 %
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity 5 % to 85 %
Dimensions (Width x Height x Depth) / Weight 1276.4 mm x 751.9mm x 63.9 mm / 29.1 kg,
(50.2 inches) x (29.6 inches) x (2.5 inches) / (64.1 lbs)
* Touch Screen
OS (Operating
System)
Windows 8.x / 10 , Linux kernel above v3.0 40 Points
Space between touches : at least 20 mm or more
ENGLISH
28
HDMI/ DVI-D/ DisplayPort/ OPS (PC) Support mode
Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark
800 x 600 37.879 60.317
1024 x 768 48.363 60
1280 x 720 44.772 59.855
1366 x 768 47.7 60
1280 x 1024 63.981 60.02
1680 x 1050 65.29 59.954
1920 x 1080 67.5 60
3840 x 2160 67.5 30 HDMI/ DisplayPort
3840 x 2160 135 60 HDMI/ DisplayPort
HDMI/ DisplayPort/ OPS (DTV) Support Mode
Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark
480/60p 31.5 60
576/50p 31.25 50
720/50p 37.5 50
720/60p 45 60
1080/50i 28.1 50
1080/60i 33.75 60
1080/50p 56.25 50
1080/60p 67.432 59.94
1080/60p 67.5 60
2160/30p 67.5 30 HDMI/ DisplayPort
2160/50p 112.5 50 HDMI/ DisplayPort
2160/60p 135 60 HDMI/ DisplayPort
Multi-screen (PC) Support mode
Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark
1280 x 720 44.772 59.855
1920 x 1080 67.5 60
3840 x 2160 67.5 30 HDMI1/2, DisplayPort PIP
(Main)
ENGLISH
29
Multi-screen (DTV) Support mode
Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark
720/50P 37.5 50
720/60P 45 60
1080/50P 56.25 50
1080/60P 67.5 60
2160/30P 67.5 30 HDMI1/2, DisplayPort PIP
(Main)
NOTE
•Resolutions available for the Input Label option in HDMI/ DVI-D/ DISPLAYPORT/ OPS input modes.
-PC resolutions: 1280 x 720 / 60 Hz, 1920 x 1080 / 60 Hz.
-DTV resolutions: 480p, 720p, 1080p.
•Vertical frequency: The product display functions by the screen image changing dozens of times every second like a
fluorescent lamp.
The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz.
• Horizontal frequency: The horizontal interval is the time taken to display one horizontal line. When 1 is divided by
the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
Wireless module(LGSBW41) Specifications
Wireless LAN Bluetooth
Standard IEEE 802.11a/b/g/n Standard Bluetooth
Frequency range (MHz)
2400 to 2483.5
5150 to 5250
5725 to 5850
Frequency range (MHz) 2400 to 2483.5
Output power (Max.)
802.11a: 11.5 dBm
802.11b: 11 dBm
802.11g: 10.5 dBm
802.11n - 2.4 GHz: 11 dBm
802.11n - 5 GHz: 12.5 dBm
Output power (Max.) 10 dBm or Lower
•As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is
configured for the regional frequency table.
•For consideration of the user, this device should be installed and operated with a minimum distance of
20 cm (7.8 inches )between the device and the body.
•Contains FCC ID: BEJLGSBW41 / Contains IC: 2703H-LGSBW41
Make sure to read the Safety Precautions before using
the product.
The model and serial numbers of the SET are located on
the back and one side of the SET. Record it below should
you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or OFF
this device.
ENERGY STAR® is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency (EPA).
As an ENERGY STAR® Partner LGE U.
S. A.,
Inc. has determined that this product
meets the ENERGY STAR® guidelines for
energy efficiency.
Refer to ENERGYSTAR.gov for more information on the
ENERGY STAR® program.