•On the website you can download the manual including installation, using, troubleshooting, specifications, license etc and view its contents on your PC or

mobile device.

•User Guide : For more information about this TV, read the USER GUIDE embedded in the product. (Depending on model)

-To open the USER GUIDE → → [Support] → [User Guide]

Separate Purchase

•Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These

devices only work with certain models.

•The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

•Magic Remote Control :

Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.

•A cable to connect antennas and external devices must be purchased separately.

Note

•Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

•The items supplied with your product may vary depending on the model.

•Image shown may differ from your TV.

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS

WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

•Do not place the TV and/or remote control in the following

environments:

-Keep the product away from direct sunlight.

-An area with high humidity such as a bathroom.

-Near any heat source such as stoves and other devices that

produce heat.

-Near kitchen counters or humidifiers where they can easily be

exposed to steam or oil.

-An area exposed to rain or wind.

-Do not expose to dripping or splashing and do not place objects

filled with liquids, such as vases, cups, etc. on or over the

apparatus (e.g., on shelves above the unit).

-Near flammable objects such as gasoline or candles, or expose

the TV to direct air conditioning.

-Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/

explosion, malfunction or product deformation.

•Ventilation

-Install your TV where there is proper ventilation. Do not install in

a confined space such as a bookcase.

-Do not install the product on a carpet or cushion.

-Do not block or cover the product with cloth or other materials

while unit is plugged in.

•Take care not to touch the ventilation openings. When watching the

TV for a long period, the ventilation openings may become hot.

•Do not use high voltage electrical equipment near the TV (e.g., a bug

zapper). This may result in product malfunction.

•Do not attempt to modify this product in any way without written

authorization from LG Electronics. Accidental fire or electric shock

can occur. Contact your local customer service for service or repair.

Unauthorized modification could void the user’s authority to operate

this product.

•Use only an authorized attachments / accessories approved by LG

Electronics. Otherwise, this may result in fire, electric shock, malfunction,

or product damage.

•Never disassemble the AC adapter or power cord. This may result in fire

or electric shock.

•Handle the adapter carefully to avoid dropping or striking it. An impact

could damage the adapter.

•To reduce the risk of fire or electrical shock, do not touch the TV with wet

hands. If the power cord prongs are wet or covered with dust, dry the

power plug completely or wipe dust off.

•Batteries

-Store the accessories (battery, etc.) in a safe location out of the reach

of children.

-Do not short circuit, disassemble, or allow the batteries to overheat.

Do not dispose of batteries in a fire. Batteries should not be exposed

to excessive heat.

-Caution : Risk of fire or explosion if the battery is replaced by an

incorrect type.

•Moving

-When moving, make sure the product is turned off, unplugged, and

all cables have been removed. It may take 2 or more people to carry

larger TVs. Do not press or put stress on the front panel of the TV.

Otherwise, this may result in product damage, fire hazard or injury.

•Keep the packing anti-moisture material or vinyl packing out of the reach

of children.

•Do not allow an impact shock, any objects to fall into the product, and do

not drop anything onto the screen.

•Do not press strongly upon the panel with a hand or a sharp object such

as a nail, pencil, or pen, or make a scratch on it. It may causedamage

to screen.

•Cleaning

-When cleaning, unplug the power cord and wipe gently with a soft/

dry cloth. Do not spray water or other liquids directly on the TV. Do

not clean your TV with chemicals including glass cleaner, any type of

air freshener, insecticide, lubricants, wax (car, industrial), abrasive,

thinner, benzene, alcohol etc., which can damage the product and/

or its panel. Otherwise, this may result in electric shock or product

damage.

•Protect the power cord from physical or mechanical abuse, such as being

twisted, kinked, pinched, closed in a door, or walked upon. Pay particular

attention to plugs, wall outlets, and the point where the cord exits the

device.

•Do not move the TV whilst the Power cord is plugged in.

•Do not use a damaged or loosely fitting power cord.

•Be sure to grasp the plug when unplugging the power cord. Do not pull

on the power cord to unplug the TV.

•Do not connect too many devices to the same AC power outlet as this

could result in fire or electric shock.

•Disconnecting the Device from the Main Power

-The power plug is the disconnecting device. In case of an emergency,

the power plug must remain readily accessible.

•Do not let your children climb or cling onto the TV. Otherwise, the TV may

fall over, which may cause serious injury.

•Outdoor Antenna Grounding (Can differ by country):

-If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or where

it can come in contact with such power lines or circuits as death or

serious injury can occur.

•Never touch this apparatus or antenna during a lightning storm. You may

be electrocuted.

•Make sure the power cord is connected securely to the TV and wall socket

if not secured damage to the Plug and socket may occur and in extreme

cases a fire may break out.

•Do not insert metallic or inflammable objects into the product. If a

foreign object is dropped into the product, unplug the power cord and

contact the customer service.

•Do not touch the end of the power cord while it is plugged in. You may

be electrocuted.

•If any of the following occur, unplug the product immediately

and contact your local customer service.

-The product has been damaged.

-If water or another substance enters the product (like an AC adapter,

power cord, or TV).

-If you smell smoke or other odors coming from the TV.

-When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power source is

connected to the unit if not unplugged in.

Installation

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or

damaged and for safe transportation regardless of its type and size.

•It is recommended to move the TV in the box or packing material that

the TV originally came in.

•Before moving or lifting the TV, disconnect the power cord and all cables.

•When holding the TV, the screen should face away from you to avoid

damage.

•Hold the top and bottom of the TV frame firmly. Make sure not to hold

the transparent part, speaker, or speaker grill area.

•When transporting a large TV, there should be at least 2 people.

•When transporting the TV, do not expose the TV to jolts or excessive

vibration.

•When transporting the TV, keep the TV upright, never turn the TV on its

side or tilt towards the left or right.

•Do not apply excessive pressure to cause flexing / bending of frame

chassis as it may damage screen.

•When handling the TV, be careful not to damage the protruding buttons.

•Avoid touching the screen at all times, as this may result in damage to

the screen.

•When attaching the stand to the TV set, place the screen facing down on

a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10cm (minimum) space from the wall for proper ventilation.

2 Connect the power cord to a wall outlet.

•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts

when assembling the product. (Doing so may damage the product.)

•If you install the TV on a stand, you need to take actions to prevent the

product from overturning. Otherwise, the product may fall over, which

may cause injury.

•Do not use any unapproved items to ensure the safety and product life

span.

•Any damage or injuries caused by using unapproved items are not

covered by the warranty.

•Make sure that the screws are inserted correctly and fastened securely.

(If they are not fastened securely enough, the TV may tilt forward after

being installed.) Do not use too much force and over tighten the screws;

otherwise screw may be damaged and not tighten correctly.

Securing TV to the Wall

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of

the TV.

• If there are bolts inserted at the eye-bolts position, remove the bolts

first.

2 Mount the wall brackets with the bolts to the wall. Match the location of

the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make

sure to keep the rope horizontal with the flat surface.

•Use a platform or cabinet that is strong and large enough to support the

TV securely.

•Brackets, bolts and ropes are not provided. You can obtain additional

accessories from your local dealer.

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully and

install the wall mount bracket on a solid wall perpendicular to the floor.

When you attach the TV to other building materials, please contact qualified

personnel. LG recommends that wall mounting be performed by a qualified

professional installer. We recommend the use of LG’s wall mount bracket.

LG’s wall mount bracket is easy to move with cables connected. When you

do not use LG’s wall mount bracket, please use a wall mount bracket where

the device is adequately secured to the wall with enough space to allow

connectivity to external devices. It is advised to connect all the cables before

installing fixed wall mounts.

•Remove the stand before installing the TV on a wall mount by

performing the stand attachment in reverse.

•For more information of screws and wall mount bracket, refer to the

Separate purchase.

•If you intend to mount the product to a wall, attach VESA standard

mounting interface (optional parts) to the back of the product. When

you install the set to use the wall mounting bracket (optional parts), fix

it carefully so as not to drop.

•When mounting a TV on the wall, make sure not to install the TV by

hanging the power and signal cables on the back of the TV.

•Do not install this product on a wall if it could be exposed to oil or oil

mist. This may damage the product and cause it to fall.

•When installing the wall mounting bracket, it is recommended to cover

the stand hole using tape, in order to prevent the influx of dust and

insects. (Depending on model)

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75Ω).

•Use a signal splitter to use more than 2 TVs.

•If the image quality is poor, install a signal amplifier properly to improve

the image quality.

•If the image quality is poor with an antenna connected, try to realign the

antenna in the correct direction.

•An antenna cable and converter are not supplied.

•For a location that is not supported with Ultra HD broadcasting, this TV

cannot receive Ultra HD broadcasts directly. (Depending on model)

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable

(75Ω). (Depending on model)

Starting TV

Turning on the TV

You can simply operate the TV functions, using the button.

Power On (Press)

Power Off1) (Press and Hold)

Menu Control (Press2))

Menu Selection (Press and Hold3))

1) All running apps will close, and any recording in progress will stop.

(Depending on country)

2) You can access and adjust the menu by pressing the button when TV is on.

3) You can use the function when you access menu control.

Note

•If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.

•Your TV’s OSD (On Screen Display) may differ slightly from that shown

in this manual.

•The device must be easily accessed to a location outlet near the access.

Some devices are not made by turning on / off button, turning off the

device and unplugging the power cord.

Connections

Connect various external devices to the TV and switch input modes to select

an external device. For more information of external device’s connection, refer

to the manual provided with each device.

HDMI

•When connecting the HDMI cable, the product and external devices

should be turned off and unplugged.

•Supported HDMI Audio format (Depending on model):

True HD (48kHz),

Dolby Digital / Dolby Digital Plus (32kHz / 44.1kHz / 48kHz),

PCM (32kHz / 44.1kHz / 48kHz / 96kHz / 192kHz)

Note

•If the device connected to Input Port also supports HDMI Deep Colour,

your picture may be clearer. However, if the device doesn’t support it, it

may not work properly. In that case, change the TV’s [HDMI Deep Colour]

setting to off. (Depending on model)

• → → [General] → [Devices] → [HDMI Settings] → [HDMI

Deep Colour] (Depending on model)

•Use a certified cable with the HDMI logo attached.

•If you do not use a certified HDMI cable, the screen may not display or a

connection error may occur.

•Recommended HDMI Cable Types

-Ultra High Speed HDMI®/™ cable (3m or less)

USB

Some USB Hubs may not work. If a USB device connected using a USB Hub

is not detected, connect it to the USB port on the TV directly. (Depending on

model)

Note

•For an optimal connection, HDMI cables and USB devices should have

bezels less than 10mm thick and 18mm width. Use an extension cable

that supports if the USB cable or USB memory stick does not fit

into your TV’s USB port. (Depending on model)

IR Blaster

Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player,

soundbar, game consoles, etc., using the IR Blaster. (Depending on country)

(Depending on model)

Note

•Connect the IR Blaster cable to the TV’s IR Blaster port.

•Use universal control settings to control the device.

•Secure the IR Blaster with the 3M tape provided.

External Devices

Available external devices are: Blu-ray player, HD receivers, DVD players, VCRs,

audio systems, USB storage devices, PC, gaming devices, and other external

devices.

Note

•The external device connection may differ from the model.

•In PC mode, there may be noise associated with the resolution, vertical

pattern, contrast or brightness. If noise is present, change the PC output

to another resolution, change the refresh rate to another rate or adjust

the brightness and contrast on the [Picture] menu until the picture is

clear.

•In PC mode, some resolution settings may not work properly depending

on the graphics card.

•If Ultra HD content is played on your PC, video or audio may become

disrupted intermittently depending on your PC’s performance.

(Depending on model)

•When connecting to a wired LAN, use a CAT 7 cable with high-speed

Internet transmission. (Only when port is provided.)

Specications

(Depending on country)

Broadcasting Specifications

Digital TV

(Depending on country)

Analogue TV

(Depending on country)

Television system

DVB-S/S2

DVB-T/T2

DVB-C

PAL/SECAM B/G, D/K, I

SECAM L

Program coverage

DVB-S/S2 DVB-C DVB-T/T2

46 ~ 862MHz

950 ~ 2,150MHz 46 ~ 890MHz

VHF III : 174 ~ 230MHz

UHF IV : 470 ~ 606MHz

UHF V : 606 ~ 862MHz

S Band II : 230 ~ 300MHz

S Band III : 300 ~ 470MHz

Maximum number of

storable programmes 6,000 3,000

External antenna

impedance 75Ω

CI Module (W x H x D) 100.0mm x 55.0mm x 5.0mm

•Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced

8K images will vary depending on the source content. (Depending on model)

Environment condition

Operating Temperature 0°C to 40°C

Operating Humidity Less than 80%

Storage Temperature -20°C to 60°C

Storage Humidity Less than 85%

•For information of the power supply and power consumption, refer to the label attached to the product.

-The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.

* On some models, the label is inside the external device connection terminal cover.

* Depending on the model or country, the typical power consumption may not be on label.

Product Information

Open Source Software Notice

Information

To obtain the source code that is contained in this product, under GPL, LGPL,

MPL, and other open source licenses that have the obligation to disclose

source code, and to access all referred license terms, copyright notices and

other relevant documents please visit https://opensource.lge.com.

LG Electronics will also provide open source code to you on CD-ROM for a

charge covering the cost of performing such distribution (such as the cost of

media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid to anyone in receipt of this information for a period of three

yearsafter our last shipment of this product.

Licenses

(Magic Remote supported models only)

Troubleshooting

Cannot control the TV with

the remote control.

•Check the remote control sensor on the product and try again.

•Check if there is any obstacle between the product and the remote control.

•Check if the batteries are still working and properly installed ( to , to ).

No image display and no

sound is produced.

•Check if the product is turned on.

•Check if the power cord is connected to a wall outlet.

•Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly. •Check the power control settings. The power supply may be interrupted.

•Check if the auto-off function is activated on the settings related time.

•If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

When connecting to the

PC (HDMI), no signal is

detected.

•Turn the TV off/on using the remote control.

•Reconnect the HDMI cable.

•Restart the PC with the TV on.

Abnormal Display •If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is

nothing wrong with product.

•This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly

coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not

affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is

not subject to exchange or refund.

•You may find different brightness and colour of the panel depending on your viewing position(left/right/top/

down).

This phenomenon occurs due to the characteristic of the panel.

It is not related with the product performance, and it is not malfunction.

•Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on

the TV screen for a long period of time.

Generated Sound •“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal

contraction due to temperature and humidity. This noise is common for products where thermal deformation is

required.

•Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which

supplies a large amount of current to operate a product. It varies depending on the product. This generated sound

does not affect the performance and reliability of the product.

•When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the

guide panel. (Depending on model)

•Make sure to wring any excess water or cleaner from the cloth.

•Do not spray water or cleaner directly onto the TV screen.

•Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

Using Magic Remote Control

Power Turns the TV on or off.

Accesses the [Guide].

Accesses the saved programmes list.

Accesses the [Edit Quick Access].

-[Edit Quick Access] is a feature that

allows you to enter a specified app or

Live TV directly by pressing and holding

the number buttons.

Volume buttons Adjusts the volume

level.

Home Accesses the Home menu.

Home Launches the last used apps.

Wheel (OK) Press the centre of

button to select a menu. You can change

programmes by using button.

Wheel (OK) Accesses the [Magic Explorer].

You can run the [Magic Explorer] feature

when the pointer colour is changed to

purple. If watching a programme, press

and hold down the pointer onto the video.

When using [TV Guide], [Settings], [Sports

Alert], or [Art Gallery], press and hold

down on the text.

Up/Down/Left/Right Press the up,

down, left or right button to scroll the

menu. If you press buttons while the

pointer is in use, the pointer will disappear

from the screen and Magic Remote will

operate like a general remote control. To

display the pointer on the screen again,

shake Magic Remote to the left and right.

Back Returns to the previous level.

Back Clears on-screen displays and returns

to last input viewing.

1 1

Microphone Number buttons Enters numbers.

Accesses the [Quick Help].

More actions Displays more remote

control functions.

Audio descriptions function will be

enabled.

Programme buttons Scrolls through the

saved programmes.

Mute Mutes all sounds.

Mute Accesses the [Accessibility] menu.

Voice recognition Network connection

is required to use the voice recognition

function.

Check for recommended content. (Some

recommended services may not be

available in some countries.)

Voice recognition Speak while pressing

and holding the button to use the voice

recognition feature.

Input Changes the input source.

Input Accesses the [Home Dashboard].

Q. Settings Accesses the Quick Settings.

Q. Settings Displays the [All Settings]

menu.

These access special functions in some

menus.

Red button Runs the record function.

1Streaming Service buttons Connects to

the Video Streaming Service.

Note To use the button, press and hold for more than 1 second.

The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly.

(Some buttons and services may not be provided depending on models

or regions.)

How to register the Magic Remote Control

To use the Magic Remote, first pair it with your TV.

1 Put batteries into the Magic Remote and turn the TV on.

2 Point the Magic Remote at your TV and press the Wheel (OK) on

the remote control.

* If the TV fails to register the Magic Remote, try again after turning the

TV off and back on.

How to deregister the Magic Remote Control

Press the (Back) and (Home) buttons at the same time, for five

seconds, to unpair the Magic Remote with your TV.

* Press and hold the (Home) and (Q. Settings) buttons for

more than 5 seconds to disconnect and re-register the Magic Remote

at the same time.

•It is recommended that an Access Point (AP) be located more than

0.2m away from the TV. If the AP is installed closer than 0.2m, the

Magic remote control may not perform as expected due to frequency

interference.

Using Always Ready

(Depending upon model)

You can operate the TV and connect to Bluetooth with direct voice

recognition while the power is off.

* → → [General] → [Always Ready], setting [Enable the

function] to on.

* Pressing the button while watching TV switches the screen to

[Always Ready] that is turned on, and pressing the button once

more turns the screen to [Always Ready] that is turned off.

* Press the (Home) button or the (Back) button to watch TV

when the screen is in [Always Ready] that is turned on.

* Press the Wheel (OK) button to display the wallpaper when the

screen is in [Always Ready] that is turned off, and press the button

to watch TV.

Note

•Using Always Ready may increase energy consumption.

•For more information about the feature, refer to the → →

[Support] → [User Guide] → [Troubleshooting] → [Learn More

About Always Ready].

Connecting Smart Devices using NFC Tagging

NFC is technology that uses Near Field Communication (13.56MHz),

allowing you to conveniently send and receive information without

separate settings. By bringing a smart device near the NFC-enabled

remote control, you can install the LG ThinQ app and connect the device

to the TV.

1 Turn on NFC in the smart device’s settings. To use NFC with Android

devices, set the NFC option to enable ‘read/write tags’ in the smart

device's settings. The NFC settings may vary depending on the device.

2 Bring the smart device near the (NFC) on the remote control. The

required distance for NFC tagging is about 1cm.

3 Follow the instructions to install the LG ThinQ app on your smart

device.

4 Retagging the smart device to the remote control allows you to

conveniently access various features on the connected TV through the

LG ThinQ app.

Note

•This feature is available for NFC-enabled smart devices only.

•This feature is only available if the remote control has an NFC logo.

Specifications

Specifications (MR22GN, MR22GA)

Frequency range Output Power (Max.)

Bluetooth 2,400 to 2,483.5MHz 7dBm

NFC*13.553 to 13.567MHz -13.27dBuA/m @ 10m

* Only MR22GN

Using Remote Control

Power Turns the TV on or off.

, Teletext buttons These buttons are

used for teletext.

Shows programme guide.

Edits QUICK ACCESS.

-QUICK ACCESS is a feature that

allows you to enter a specified app

or Live TV directly by pressing and

holding the number buttons.

Volume buttons Adjusts the volume

level.

Programme buttons Scrolls through

the saved programmes.

OK Selects menus or options and

confirms your input.

OK Accesses the [Magic Explorer]. When

using [TV Guide], [Settings], [Sports

Alert], or [Art Gallery], press and hold

down on the text.

Accesses the saved programmes list.

, ,

Control buttons Control buttons for

media contents.

Starts to record and displays record

menu. (Only Time MachineReady

supported model)

Input Changes the input source.

Recalls your preferred subtitle in digital

mode.

Q. Settings Accesses the Quick Settings.

Number buttons Enters numbers.

Accesses the [Quick Help].

More actions Displays more remote

control functions.

Mute Mutes all sounds.

Mute Accesses the [Accessibility] menu.

Search Check for recommended content.

(Some recommended services may not be

available in some countries.)

Search for content such as TV

programmes, movies and other videos, or

perform a web search by entering text in

the search bar.

You can watch TV or LG Channels.

Home Accesses the Home menu.

Home Launches the last used apps.

, ,

Navigation buttons (up/down/left/

right) Scrolls through menus or options.

Back Returns to the previous level.

Clears on-screen displays and returns to

TV viewing.

These access special functions in some

menus.

1Streaming Service buttons Connects

to the Video Streaming Service.

Note To use the button, press and hold for more than 1 second.

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

(Some buttons and services may not be provided depending on models or regions.)

(Depending on model)