Table of Contents
LG CK99 User Manual
Displayed below is the user manual for CK99 by LG which is a product in the Home Audio Systems category. This manual has pages.
Related Manuals
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
OWNER’S MANUAL
Mini Hi-Fi
System
Please read this manual carefully before operating your set and retain it for future
reference.
MODEL
CK99 (CK99, CKS99F)
MFL70405720
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or re. Periodically
examine the cord of your device, and if its appearance
indicates damage or deterioration, unplug it,
discontinue use of the device, and have the cord
replaced with an exact replacement part by an
authorized service center. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the device.
This device is equipped with a portable battery or
accumulator.
How to Safely remove the batteries or the battery
pack from the equipment:
To Remove the old batteries or battery pack, follow
the assembly steps in reverse order. To prevent
contamination of the environment and bring on
possible threat to human and/or animal health, the
old batteries or the battery pack must be put in an
appropriate container at designated collection points.
Do not dispose of batteries or battery pack together
with other waste. It is recommended that you use
local, free reimbursement systems batteries or
battery packs, (may not be available in your area). The
batteries or the battery pack should not be exposed
to excessive heat such as sunshine, re or the like.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~Refers to alternating current(AC).
0Refers to direct current(DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents4
1 Getting Started
2 Safety Information
6 Unique Features
7 Playable file Requirement
7 – Music file requirement
7 – Compatible USB Devices
7 – USB device requirement
8 Remote control
10 Top panel
12 Front panel
12 Rear panel
2 Connecting
14 Connecting to speakers
14 – Attaching the speaker light cables to the
unit
15 Optional Equipment Connection
15 – AUX IN Connection
16 – AUX OUT Connection
17 – PORT. IN Connection
18 – USB Connection
18 – Antenna Connection
3 Operating
19 Basic Operations
19 – CD/USB Operations
20 – Auto Play
21 – Selecting a folder and
an MP3/WMA file
22 – Deleting a file/folder or format
23 Playback Effect
23 – DJ EFFECT
23 – DJ SCRATCH
23 – AUTO DJ
24 – DJ PRO
24 – DJ LOOP
24 – PARTY ACCELERATOR
25 – MIX
25 – TEMPO
25 – AUTO SYNC
26 Using BLUETOOTH® wireless technology
26 – Listening to music stored on the Bluetooth
devices
29 Using the Music Flow Bluetooth App
29 – About “Music Flow Bluetooth” App
29 – Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
30 – Activate Bluetooth with “Music Flow
Bluetooth” App
31 Radio Operations
31 – Listening to the radio
31 – Improving poor FM reception
31 – Presetting the Radio Stations
31 – Deleting all the saved stations
32 Sound adjustment
32 – Setting the sound mode
32 – Setting the USER EQ
33 Advanced Operations
33 – Recording to USB
36 – JUKE BOX Playback
37 Other Operations
37 – Turn off the sound temporarily
37 – CHILDSAFE Mode
37 – DEMO
37 – Resume stop
Table of Contents
Table of Contents 5
1
2
3
4
5
38 – Using Microphone
40 – Using H/P MODE
41 – LIGHTING
41 – Sleep Timer Setting
41 – Dimmer
41 – Auto power down
42 – AUTO POWER On
42 – Auto function change
43 Setting the Clock
43 – Setting the Clock through “Music Flow
Bluetooth” App
43 – Using your player as an alarm clock
44 LG Sound Sync
45 WIRELESS PARTY LINK Connection
4 Troubleshooting
46 Troubleshooting
46 – General
5 Appendix
48 General specifications
49 Speakers specifications
49 Trademarks and Licenses
50 Maintenance
50 – Notes on Discs
50 – Handling the Unit
Getting Started6
Getting Started
1
Unique Features
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an app designed to let you
take control of some of LG’s latest audio devices.
(Page 29)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Getting Started 7
Getting Started
1
Playable file
Requirement
Music file requirement
MP3/WMA le compatibility with this unit is limited
as follows.
ySampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yBit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yMaximum les : Data CD : 999 / USB : 2,000
yMaximum folders : Data CD : 99 / USB : 200
yFile extensions : “.mp3”/ “.wma”
yCertain MP3/WMA les may not be played
depending on the type or format of the le.
yCD-ROM le format : ISO 9660/ JOLIET
yWe recommend that you use Easy-CD Creator,
which creates an ISO 9660 le system.
yA protected le by DRM (Digital rights
management) cannot be played on the unit.
yThe DTS disc is not supported.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive :
Devices that support USB2.0 or USB1.1.
yThe USB function of this unit does not support all
USB devices.
USB device requirement
yDevices which require additional program
installation when you have connected it to a
computer, are not supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than a
few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
yThis unit recognizes up to 2,000 les.
yExternal HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yUSB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
ySome USB may not work with this unit.
Getting Started8
Getting Started
1
Remote control
Replacement of battery
(R03)
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1 (Standby) : Turns the power on or off.
B (Open/Close) : Opens and closes the disc tray.
VOL (Volume) +/- : Adjusts speaker volume.
F (Function) : Selects the function and input source.
Input source / Function Display
Disc CD
USB USB 1 / USB 2
AUX input AUX 1 / AUX 2
Portable input PORTABLE
Bluetooth BLUETOOTH
LG Sound Sync (Wireless) LG TV
Radio RADIO (FM)
[(Mute) : Mutes the sound.
PRESET·FOLDER W/S :
- Chooses a preset number for a radio station.
(Page 31)
- Searches for a folder of MP3/WMA les. When
a CD/USB containing MP3/WMA les in several
folders is being played, press PRESET·FOLDER
W/S to select the folder you want to play.
JUKEBOX/MEMORY :
- Stores radio stations. (Page 31)
- Selects JUKE BOX mode. (Page 36)
- Makes JUKE BOX list.
AUTO DJ : Selects the AUTO DJ mode. (Page 23)
DELETE :
- Deletes MP3/WMA les. (USB only) (Page 22)
- Deletes a song on the JUKE BOX list.
- Deletes all the saved stations.
Getting Started 9
Getting Started
1
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
REPEAT : Listens to your tracks/les repeatedly or
randomly.
TUNING-/+ : Selects the radio stations.
C/V (Skip/Search) :
- Skips backward or forward.
- Searches for a section within a track/le.
N (Play/Pause) :
- Starts or pauses playback.
- Selects stereo/mono.
Z (Stop) :
- Stops playback.
- Cancels DELETE function.
SOUND EFFECT : Chooses sound impressions.
REGION EQ : Chooses region equalizer.
J (Information) :
- Sees information about your music. An MP3 le
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
- Sees Bluetooth device name of the unit in
BLUETOOTH READY.
- Sees the name of connected all Bluetooth device
in Bluetooth mode.
- When these units are successfully connected each
other in WIRELESS PARTY LINK mode, each of
connected device names appears in the each unit.
• • • • • • • • • • • • • • c • • • • • • • • • • • • •
0 to 9 numerical buttons : Selects numbered tracks,
les, or preset number.
CLOCK : Sets a clock and checks a time.
ALARM : With the ALARM function you can turn on
CD, USB play and tuner reception at a desired time.
• • • • • • • • • • • • • • d • • • • • • • • • • • • •
VOICE CANCELLER : You can reduce the vocal tones
during music playback from various input sources.
SLEEP : Sets the system to turn off automatically at
a specied time.
(Dimmer : The display window will be darkened by
half.)
SET :
Conrms the setting.
KEY CHANGER (l/L) : Changes the key to suit
your vocal range.
ECHO : Selects ECHO mode.
? : This button is not available.
VOCAL EFFECTS : Selects various vocal effects
mode.
USB REC :
- Records to USB.
- To stop Recording, press and hold for 3 seconds.
Getting Started10
Getting Started
1
Top panel
a 1 (Standby)
Turns the power on or off.
b USB REC / DEMO
- Records to USB 1.
- To stop Recording, press and hold for 3 seconds.
- In power off status, if you press USB REC / DEMO,
show DEMO mode.
c USB 1 Port
You can play sound files by connecting the USB
device.
d Display window
e TEMPO A -/+
Adjusts TEMPO in USB 1 function.
MASTER VOL. (Volume) -/+
Adjusts speaker volume.
TEMPO B -/+
Adjusts TEMPO in USB 2 function.
f USB 2 Port
You can play sound files by connecting the USB
device.
g F (Function)
- Selects the function and input source.
- Press and hold to select the PARTY LINK.
Input source / Function Display
Disc CD
USB USB 1 / USB 2
AUX input AUX 1 / AUX 2
Portable input PORTABLE
Bluetooth BLUETOOTH
LG Sound Sync (Wireless) LG TV
Radio RADIO (FM)
h 3 WIRELESS LINK
- Selects MAIN or OTHER on WIRELESS PARTY LINK
mode.
- Enable or disable WIRELESS PARTY LINK mode.
i MIC (Microphone) VOLUME -/+
Adjusts microphone volume.
j VOCAL EFFECTS
Selects VOCAL EFFECTS mode.
MIC ECHO
Selects ECHO mode.
VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
k
Side 1 / Basic controls (CD / USB 1 / BLUETOOTH /
RADIO only)
Z (Stop)
Stops playback or cancels DELETE function.
C/V (Skip/Search)
- Skips backward or forward.
- Searches for a section within a track/file.
- Selects the radio stations.
N (Play/Pause)
- Starts or pauses playback.
- Selects stereo/mono.
SEARCH
Moves to folder or file in selection mode.
OK
Selects a folder when searching a file.
DJ SCRATCH / SEARCH & LEVEL
- Turns clockwise or counterclockwise to make
scratch sound.
- Turns clockwise or counterclockwise to control the
USER EQ level.
- Searches a folder or a file.
- Adjusts DJ EFFECT level.
- Selects vocal effects.
USER EQ
Selects the sound effect created by your own.
DJ EFFECT
Selects a desired DJ EFFECT.
DJ LOOP
Selects DJ LOOP mode.
(DJ LOOP mode can use during CD/USB playback.)
Getting Started 11
Getting Started
1
l
H/P (Headphone) VOLUME -/+
Adjusts headphone volume.
m KEY CHANGER (l/L)
Changes the key to suit your vocal range.
H/P (Headphone) MODE
Press to select a headphone monitor mode.
n Side 2 / Basic controls (USB 2 only)
Z (Stop)
Stops playback or cancels DELETE function.
C/V (Skip/Search)
- Skips backward or forward.
- Searches for a section within a track/file.
N (Play/Pause)
Starts or pauses playback.
SEARCH
Moves to folder or file in selection mode.
OK
Selects a folder when searching a file.
DJ SCRATCH / SEARCH & MULTI
- Turns clockwise or counterclockwise to make
scratch sound.
- Searches a folder or a le.
- Selects the lighting effects.
DJ LOOP
Selects DJ LOOP mode.
(DJ LOOP mode can use during USB playback.)
REGION EQ / BASS BLAST (or BASS BLAST+)
- Chooses region equalizer.
- Press and hold to select BASS BLAST
(or BASS BLAST+) effect directly.
LIGHTING
Selects lighting mode.
o B (Open/Close)
Opens and closes the disc tray.
p
CLUB, DRUM, USER (DJ PRO)
Selects CLUB, DRUM or USER sound effect to mix.
(If you want to use USER, you have to register a
source with “Music Flow Bluetooth” app.)
1, 2, 3, 4, 5, 6 (DJ PRO PAD)
Press a desired sound pad.
q AUTO SYNC
When using MIX, you can synchronize the tempo
of audio files being played in USB 1 and USB 2 by
pressing AUTO SYNC.
MIX
Mixes audio sound.
Cross fader
Move the cross fader to adjust the sound volume of
mixed sound when using MIXER ON.
r PARTY ACCELERATOR lever
Slide the lever to create a party atmosphere.
PARTY ACCELERATOR MODE
Selects PARTY ACCELERATOR MODE.
Getting Started12
Getting Started
1
Front panel
ab edc
a MIC (Microphone) 1/2 jack
b Disc tray
c (Remote sensor)
d
PORT. (Portable) IN jack
e H/P (Headphone) jack
Rear panel
a Power cord
yConnect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may
not operate properly because of the lack of
power supply.
yDo not overload the extension cord with
excessive electrical load.
> Caution
b AUX IN 1/2 (L/R)
AUX OUT (L/R)
c ANTENNA (FM)
d SPEAKERS connector
e
SPEAKER LIGHTING
Connect the speaker lighting cables.
f
Lighting LED
L
R
L
R
L
R
edda bc f
Getting Started 13
Getting Started
1
Useful functions for using the unit
Function Description To do Do this
BLUETOOTH
Lock On/Off
(Page 28)
It allows you to connect a
Bluetooth device only on
BLUETOOTH and LG TV functions.
Initial setting of this function was
set to off.
ON Press and hold N on the remote control or
N on the side 1 of the unit for 5 seconds in
BLUETOOTH function.
OFF Press and hold N on the remote control or
N on the side 1 of the unit for 5 seconds in
BLUETOOTH function.
Auto Power On
(Page 42)
It allows the unit to turn on
automatically by input signals :
BLUETOOTH or LG TV
ON Turn off the unit by pressing 1 on the unit
for 5 seconds.
OFF Turn off the unit by pressing 1 on the unit
for 5 seconds.
2 Connecting
Connecting14
Connecting
2
Connecting to speakers
Connect the speaker cable plugs to the SPEAKERS
connector. Make sure to connect the speaker’s plug
to the corresponding colored speaker connector
when connecting the plug.
Attaching the speaker light
cables to the unit
To connect the speaker light cable to the unit, insert
the cable to SPEAKER LIGHTING connectors on
the unit.
L
R
L
R
L
R
yMake sure that the jacks and the speakers
are matched correctly.
yMake sure to connect the cables to
connectors tightly on the unit.
> Caution
yDo not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
yWhen you connect the speakers to the unit,
make sure to connect the speaker’s cable and
plug to the corresponding speaker connector.
yThe speakers must be placed a minimum
of 20 cm from the unit for preventing the
vibration caused by the speakers.
20 cm20 cm
yCheck the volume level before playing music
to prevent inrm, child, and pregnant women
from being shocked by the sudden and loud
sound from the unit.
yDo not use the unit in a limited space.
It may damage a person’s hearing. It is
recommended to use it in a wide space.
yBe careful to make sure children do not put
their hands or any objects into the *speaker
duct.
* speaker duct : A hole for plentiful bass
sound on speaker cabinet (enclosure)
yUse the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
yThe speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
yDo not look directly at the light emitting part
when the LIGHTING is turned on.
yIf the illumination brightness is glaring, switch
on the room lights or turn off the LIGHTING
of the unit.
> Caution
Connecting 15
Connecting
2
Optional Equipment
Connection
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN 1/2 (L/R) connector.
If your device has only one output for audio(mono),
connect it to the left(white) audio jack on the unit.
L
R
L
R
L
R
L
R
L
R
L
R
Red
White
Audio cable
DVD, Blu-ray player etc.
Connecting16
Connecting
2
AUX OUT Connection
Connect an input of auxiliary device to the AUX OUT
(L/R) connector.
If your device has only one input for audio(mono),
connect it to the left(white) audio jack on the unit.
L
R
L
R
L
R
L
R
L
R
L
RAudio cable
Auxiliary device
PARTY LINK
You can connect two units to play music together.
The name of function about sound expansion
between the compatible products wired or wirelessly
was changed to PARTY LINK or WIRELESS PARTY
LINK.
1. Connect AUX OUT (L/R) connector on a unit to
the AUX IN connector on the other unit using
audio cable.
2. Press and hold F connected through AUX OUT
and then select LINK ON.
“LINK ON” appears in the display window and
change to “DELAY time” soon.
3. Press
C/V to adjust delay setting.
When “LINK ON” and “DELAY time” are displayed
in the display window, you can adjust the delay
time.
4. Press
F to save the delay setting.
yThis function is not available on LG TV
function.
yThe initial delay is 30 ms. If you want to
change the Delay time, press C/V. The
connected device’s delay may differ. If Audio
Sync is not matched, adjust delay of PARTY
LINK to synchronize sound.
yIt is available to adjust the delay from 0 ms to
200 ms. Synchronizing tempo is not available
depending on the devices.
yDelay value is saved and PARTY LINK is
turned off when the unit turns off.
yYou can select LINK ON / LINK OFF mode by
pressing and holding F.
yIn case of the microphone, delay setting is
not applied.
, Note
Connecting 17
Connecting
2
PORT. IN Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORT. IN (3.5 mm)
connector.
3.5 mm stereo cable
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN 1/2
connector of the unit.
2. Turn the power on by pressing 1.
3. Press
F to select AUX 1 / AUX 2 or PORTABLE
function.
4. Turn on the portable player or external device and
start it playing.
Automatically switches to the PORTABLE
function when you connect the portable device
to the PORT. IN connector.
, Note
Connecting18
Connecting
2
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
Removing the USB device from the unit :
1. Choose a different function/mode or
press Z twice in a row.
2. Remove the USB device from the unit.
, Note
Antenna Connection
Connect the supplied FM antenna for listening to
the radio.
Connect the FM wire antenna to the FM antenna
connector.
L
R
L
R
L
R
FM antenna
Be sure to fully extend the FM wire antenna.
, Note
3 Operating
Operating 19
Operating
3
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B.
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing
F
.
To Do this
Stop Press Z.
Playback Press N.
Pause Press N during playback.
Searching
for a section
within a track/
le
Press and hold C/V during
playback and release it at the point
you want to listen to.
Selecting
a track/le
directly
Press 0 to 9 numerical buttons on
the remote control to go to the
desired le or track directly.
Skipping to
the next/
previous
track/le
- In stop status,
Press C/V to go to the next/
previous track/le.
- During playback,
(1) By using C/V buttons :
Press V to go to the next track/
le.
Playing in less than 3 seconds,
press C to go to the previous
track/le.
Playing after 3 seconds, press C
to go to the beginning of the track/
le.
(2) By using SEARCH :
Rotate DJ SCRATCH / SEARCH &
LEVEL on the side 1 of the unit
(or DJ SCRATCH / SEARCH &
MULTI on the side 2 of the unit)
or C/V and press N to play
the track/le.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly. Refer to the
note for details about the display
change.
yRepeat/Shufe playback operates as follows.
On Display Description
OFF Plays songs in order and stops
the playback.
ONE Plays a same song repeatedly.
FOLDER Plays songs in a folder
repeatedly. (Except AUDIO CD)
ALL Plays all the songs repeatedly.
SHUFFLE
Plays all the songs once
randomly, and stops the
playback.
yWhen you play JUKE BOX list, only ONE and
ALL are available.
yEven after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yIf you leave the disc tray open for 5 minutes,
it will close automatically.
, Note
Operating20
Operating
3
Auto Play
- AUDIO/MP3/WMA CD is played automatically
after disc tray is opened and then closed.
- Automatically the unit switches to the CD
function if disc tray is opened and then closed
even when there is no disc in disc tray.
- When CD or USB is inserted
- If you press N on the side 1 of the unit,
the function is changed to CD or USB 1 and
playback starts. (Except BLUETOOTH, RADIO
function)
- If you press N on the side 2 of the unit, the
function is changed to USB 2 and playback
starts. (Except MIXER ON mode)
.
When CD or USB is inserted
- Function is changed to CD or USB 1
if C/V, Z, SEARCH on the side 1 of the
unit is pressed. (Except BLUETOOTH, RADIO
function)
- Function is changed to USB 2
if C/V, Z, SEARCH on the side 2 of the
unit is pressed. (Except MIXER ON mode)
, Note
Operating 21
Operating
3
Selecting a folder and
an MP3/WMA file
On the unit
1. Press SEARCH and rotate DJ SCRATCH /
SEARCH & LEVEL on the side 1 (or rotate DJ
SCRATCH / SEARCH & MULTI on the side 2) or
C/V until a desired file appears. You can also
search a folder if you press SEARCH again.
2. Press OK or N to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or N again. The selected
file is played.
On the remote control
1. Press PRESET·FOLDER W/S or C/V
repeatedly until a desired folder appears.
2. Press
N to play it. The first file of folder will be
played.
yCD/USB Folders/Files are recognized as
below.
*
yIf there is no le in a folder, the folder will not
appear.
yFolders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yFile will be played from $ le No.1 to $ le
No.14 one by one.
yFiles and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
*ROOT : The rst screen you can see when a
computer recognize the CD/USB is “ROOT”.
, Note
Operating22
Operating
3
Deleting a file/folder or format
You can delete le, folder on your USB or format the
USB.
1. Select USB function by pressing F.
2. Press DELETE on the remote control repeatedly,
the display changes as followings.
DEL FILE? DEL FOLDER? FORMAT?
On Display Description
DEL FILE? Select the le you want to
delete.
DEL FOLDER? Select the folder you want to
delete.
FORMAT? Select to format the USB device.
If you want to exit the current mode, press Z.
3. To delete file/folder or format, press and hold
DELETE on the remote control.
yDo not extract the USB device during
operation. (play, delete, etc.)
yRegular back up is recommended to prevent
data loss.
yThe delete function may not be supported
according to the USB status. (lock, etc.)
> Caution
Operating 23
Operating
3
Playback Effect
The unit supports various sound and playback effects :
DJ EFFECT, DJ SCRATCH, AUTO DJ, DJ PRO, DJ LOOP,
PARTY ACCELERATOR, MIX, TEMPO, AUTO SYNC.
DJ EFFECT
It allows you to enjoy DJ EFFECT such as Flanger/
Phaser/Wah/Delay sound effect.
1. Press DJ EFFECT on the unit to select a desired
DJ EFFECT (FLANGER, PHASER, WAH, DELAY, DJ
EFFECT OFF).
2. Turn DJ SCRATCH / SEARCH & LEVEL on the
unit clockwise or counterclockwise to adjust the
DJ EFFECT level between 0 to 15.
yThe DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT key on the unit
is inputted.
yThe current gage level is displayed when
adjusting gage.
yIf the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
, Note
DJ SCRATCH
You can output and mix the sound effects of the DJ
SCRATCH.
Rotating DJ SCRATCH / SEARCH & LEVEL or DJ
SCRATCH / SEARCH & MULTI on the unit to mix
the scratch sound.
- You can hear effect of scratch sound depending
on the direction in which you rotate DJ SCRATCH
/ SEARCH & LEVEL or DJ SCRATCH / SEARCH
& MULTI on the unit.
AUTO DJ
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/les for
uninterrupted playback.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings.
SHUFFLE SEQUENTIAL OFF
On Display Description
OFF -
SHUFFLE The music is played randomly on
this mode.
SEQUENTIAL The music is played repeatedly on
this mode.
yAUTO DJ mode does not support searching
for a section within a track/le or to play
repeatedly or randomly.
yIf you move to other functions or stop the
music using Z on AUTO DJ mode, AUTO DJ
will be disabled.
yAUTO DJ is not supported in the music le
whose length is less than 60 seconds.
yOnly SEQUENTIAL is selected when played
JUKE BOX list.
, Note
Operating24
Operating
3
DJ PRO
It allows you to mix CLUB, DRUM or USER sound
effect. Each mode has up to 6 sounds effect.
1. Press and hold DJ PRO (CLUB, DRUM or USER)
on the unit to select a desired DJ PRO sound
effect.
2. Press DJ PRO pad (1, 2, 3, 4, 5, 6) of desired
sound on the unit.
yIf you want to use USER, you have to register
a source with “Music Flow Bluetooth” app.
If the source is not register to USER, “USER
MODE EMPTY” or “DJ PRO NO SOUND”
appears on the display window.
yInitial DJ Pro mode is CLUB sound effect.
yDJ Pro mode is displayed for 3 seconds when
you press DJ PRO (CLUB, DRUM or USER)
on the unit.
yThe DJ PRO sound is mixed when you press
DJ PRO pad (1, 2, 3, 4, 5, 6) on the unit.
yThe currently playing DJ PRO sound is
stopped and the selected DJ PRO sound
outputs if you press a different DJ PRO pad
(1, 2, 3, 4, 5, 6) on the unit while DJ PRO
sound is playing.
, Note
DJ LOOP
The certain section (about 1 sec) of sound is
repeatedly played. (CD, USB Only)
During playback, press and hold DJ LOOP on the unit
at the point you want. And you can cancel DJ LOOP
function by releasing it.
This function is released after operating 10
times or releasing DJ LOOP on the unit.
, Note
PARTY ACCELERATOR
It allows you to create a party atmosphere.
1. Select the mode by pressing PARTY
ACCELERATOR MODE on the unit.
The sound effect will react differently according
to the mode.
PARTY ACCEL MODE 1 PARTY ACCEL MODE
2 PARTY ACCEL MODE 3
2. After selecting the mode, slide up the lever of
PARTY ACCELERATOR on the unit to create a
party atmosphere.
The sound effect will react according to moving
the lever of PARTY ACCELERATOR on the unit.
PARTY ACCEL OFF PARTY ACCEL 1
PARTY ACCEL 2 PARTY ACCEL CLIMAX
Operating 25
Operating
3
MIX
You can mix audio sounds.
1. Press MIX on the unit.
‘MIXER ON’ is displayed. Select a desired function
for side 1 and play it. Mix is available in all
functions except USB 2.
2. During playback, insert a USB device in USB 2
port and play it. Side 2 is fixed as USB 2 function.
3. Move the cross fader to adjust the sound volume
of mixed sound.
Move it to the left to lower the volume of
side 2 and move it to the right to lower the
volume of side 1.
yIn MIXER ON mode,
- You can adjust the Tempo for USB function
1 or 2.
- If you press C/V, Z or N on the unit,
it works only for each side.
- If you press C/V, Z or N on the
remote control, it works for both side 1
and side 2.
- For operating, it is recommended to use
C/V, Z or N on the unit instead of
remote controls.
- Numerical, DELETE buttons do not work.
- You can use H/P MODE. (Page 40)
yIf you turn off the unit in the middle of mixing
process, MIX mode turns to OFF.
, Note
TEMPO
You can adjust the Tempo for USB function from 50
(MIN) to 150 (MAX).
Rotate TEMPO A on the unit to adjust the tempo for
USB 1. Rotate TEMPO B on the unit to adjust the
tempo for USB 2.
yThe tempo is set as 100 if you turn the unit
on/off or fully stop.
yThe tempo is kept when you pause and
resume play.
, Note
AUTO SYNC
When using Mixing, you can synchronize the tempo
of audio les being played in USB 1 and USB 2 by
pressing AUTO SYNC on the unit.
To stop it, press AUTO SYNC on the unit twice.
yThe tempo of music being played in USB 1 is
synchronized to that in USB 2.
yTEMPO A doesn’t work when AUTO SYNC
is on.
yIf USB 2 fully stops or function is changed,
AUTO SYNC function is cancelled.
yIn case of below, AUTO SYNC error may occur
depending on the sound source.
- The silent section in the beginning of the
track.
- Intro or bridge section in which few
musical instruments appear.
- In cases where playback speed or tempo
of the song changes.
- In case that the data for BPM is provided
in real time, not the beginning of the song.
yIf the song is being played too fast or slow,
press and hold AUTO SYNC.
‘AUTO SYNC RE-ANALYZING’ is displayed.
yAUTO SYNC is available only when USB 1 is
selected for side 1 and USB 2 is selected for
side 2 in MIXER ON mode and both are being
played.
, Note
Operating26
Operating
3
Using BLUETOOTH®
wireless technology
About Bluetooth
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
yAvailable Devices : Smart phone, MP3, Notebook,
etc.
yVersion : 4.0
yCodec : SBC, AAC
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
Listening to music stored on the
Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed, it
does not need to be performed again.
1. Turn on the unit.
When Bluetooth connection lock is
activated, you can search Bluetooth device in
BLUETOOTH function.
, Note
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG CK99 (XX)”.
yXX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG CK99
(08)” on your Bluetooth device.
yDepending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
yYou can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yThe multi phone pairing connection is only
supported on Android devices. (Multi phone
pairing connection may not be supported
depending on the connected device
specications.)
yRemovable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi phone
pairing.
, Note
Operating 27
Operating
3
3. When this unit is successfully connected with
your Bluetooth device, “BLUETOOTH PAIRED”
appears on the display window and change to
Bluetooth device name soon.
y"BLUETOOTH PAIRED" will momentarily
appear on the display when you connect
other devices for multi phone pairing.
yIf the device name is unavailable, “_” will be
displayed.
, Note
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
yWhen using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However, it may not work well in certain
situations as described below :
- There is a obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yIf Bluetooth connection does not work well,
try pairing it again.
yEven if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
, Note
yThe sound may be interrupted when the
connection has interference from other
electronic devices.
yDepending on the type of the device, you may
not be able to use the Bluetooth function.
yYou can enjoy wireless system using phone,
MP3, Notebook, etc.
yThe more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
yBluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yWhen Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yWhen a Bluetooth device is not connected,
“BLUETOOTH READY” appears on the display
window.
yWhen you use the Bluetooth function,
adjust the volume to a proper level on the
Bluetooth device.
yWhen you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
yBluetooth connection will be disconnected
when you change the Bluetooth function
to the others. In “Music Flow Bluetooth” app
connection, only one device which you are
playing keeps Bluetooth connection. You can
control the Bluetooth device with this unit
but you cannot use sound output.
yWhen entering Bluetooth function, this unit
automatically connect to Bluetooth device
which is connected the last or playbacked
the last.
(Auto connection may not be supported
depending on the connected device
specications.)
, Note
Operating28
Operating
3
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, stop, skip.
yOnly Android OS and iOS is available to use
this function.
yThis function may not be supported
depending on the Bluetooth device, or
operated differently.
, Note
Bluetooth connection lock
(BLUETOOTH LOCK)
You can limit Bluetooth connection to only
BLUETOOTH and LG TV function to prevent
unintended Bluetooth connection.
To turn on this function, press and hold N on the
remote control or N on the side 1 of the unit for
about 5 seconds in BLUETOOTH function.
“BLUETOOTH LOCK ON” appears then you can limit
Bluetooth connection.
To turn off this function, press and hold N on the
remote control or N on the side 1 of the unit for
about 5 seconds in BLUETOOTH function.
“BLUETOOTH LOCK OFF” appears.
Even if you set up Bluetooth connection lock to
On, this unit turns on by Auto Power function.
Turn off Auto Power function to prevent it.
, Note
Operating 29
Operating
3
Using the Music Flow
Bluetooth App
yOnly Android OS is available to use “Music
Flow Bluetooth” app with this unit.
yIt is recommended to use the latest version
of app.
, Note
About “Music Flow Bluetooth”
App
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
Here is introduce a few of the many features of
“Music Flow Bluetooth” app.
Multi Juke box : Your entertainment increases three
fold when you connect up to 3 Bluetooth phones at
the same time. Play music from all three phone and
create a customized playlist from all the phones.
Sampler Creator : Record effects on your
smartphone and very simply sync them via
Bluetooth to the system. Be as creative as you can
be.
Install “Music Flow Bluetooth”
App onto Your Bluetooth Device
There are two ways to install “Music Flow Bluetooth”
app onto your Bluetooth device.
Install “Music Flow Bluetooth” App
through QR code
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
2. Tap an icon for installation.
yMake sure that your Bluetooth device is
connected to the Internet.
yMake sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yDepending on the area, QR code may not
work.
, Note
Operating30
Operating
3
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
yMake sure that your Bluetooth device is
connected to the Internet.
yMake sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
, Note
Activate Bluetooth with “Music
Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
go to the main menu.
2. If you want to get more information to operate,
tap [Setting] and tap [Help] menu.
y“Music Flow Bluetooth” app will be available
in the software version as follow;
- Android O/S : Ver 4.0.3 (or later)
yIf you use “Music Flow Bluetooth” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
yDepending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
yAfter connection of “Music Flow Bluetooth”
app, music may be output from your device.
In this case, try connecting procedure again.
yIf you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth”
app, “Music Flow Bluetooth” app may operate
abnormally.
yWhen “Music Flow Bluetooth” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth” app
and then try to connect again.
yDepending on the smart phone's operating
system, you have some differences for “Music
Flow Bluetooth” operation.
yCheck Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth” app
connection does not work well.
, Note
Operating 31
Operating
3
Radio Operations
Be sure that FM aerial is connected. (Page 18)
Listening to the radio
1. Press F until RADIO (FM) appears in the display
window.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING-/+ on the remote control
or C/V on the side 1 of the unit for about
two seconds until the frequency indication starts
to change, then release. Scanning stops when the
unit tunes in a station.
Or
Manual tuning :
Press TUNING-/+ on the remote control or
C/V on the side 1 of the unit repeatedly.
3. Adjust the volume by pressing VOL +/- on the
remote control or rotating MASTER VOL. knob
on the unit repeatedly.
Improving poor FM reception
Press N on the remote control or N on the side 1
of the unit. This will change the tuner from stereo to
mono and usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for RADIO (FM).
Before tuning, make sure to turn down the volume.
1. Press F until RADIO (FM) appears in the display
window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or C/V
on the side 1 of the unit.
3. Press JUKEBOX/MEMORY on the remote
control. A preset number will blink in the display
window.
4. Press PRESET·FOLDER W/S on the remote
control to select the preset number you want.
5. Press JUKEBOX/MEMORY on the remote
control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET·FOLDER W/S or 0 to 9 numerical
buttons on the remote control.
Deleting all the saved stations
1. Press DELETE on the remote control.
“DELETE ALL?” will flash up on the unit display.
2. Press DELETE on the remote control to erase all
the saved radio stations.
“DELETED ALL” will flash up on the unit display.
Operating32
Operating
3
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround sound
elds. The displayed items for the equalizer may be
different depending on sound sources and effects.
You can select a desired sound mode by using
SOUND EFFECT on the remote control.
On Display Description
BASS BLAST
or
BASS BLAST+
Reinforces the bass
and powerful sound.
POP
CLASSIC
ROCK
JAZZ
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz or
classic concert.
FOOTBALL
You can enjoy
the sound effect
FOOTBALL STADIUM.
STANDARD You can enjoy
optimized sound.
You can select a desired sound mode by using
REGION EQ on the remote control or REGION EQ /
BASS BLAST (or BASS BLAST+) on the unit.
On Display Region Description
FUNK, REGUETON,
SAMBA,
MERENGUE, AXE,
SALSA, SERTANEJO,
FORRO
Latin
America
Optimized
sound effect
for the
music genre
preferred in
each region.
ARABIC Middle East
DANGDUT Indonesia
AFRO Africa
INDIA India
yOn some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
yBy pressing and holding REGION EQ / BASS
BLAST (or BASS BLAST+) on the unit for 3
seconds you can directly select BASS BLAST
(or BASS BLAST+) effect.
, Note
Setting the USER EQ
You can adjust the sound level of Bass, Middle and
Treble as your preference.
1. Press USER EQ on the unit. “USER EQ” is
displayed.
2. Press USER EQ on the unit repeatedly until
desired setting appears in the display window.
3. Rotate DJ SCRATCH / SEARCH & LEVEL on the
unit to adjust the value.
Operating 33
Operating
3
Advanced Operations
Recording to USB
You can record a various sound source to USB 1.
(CD, USB 2, AUX 1, AUX 2, PORTABLE, RADIO (FM))
1. Connect the USB 1 device to the unit.
2. Press F to select a function you want to record.
3. Start the recording by pressing USB REC on the
remote control or USB REC / DEMO on the unit.
Function
/Mode Status Result
CD, USB
Play/Pause Recorded until stop
Resume stop
(Page 37)
Quick recorded the latest
song
Full stop
Quick recorded All songs
In case below, scope is
limited.
- After File search (Page
21), quick recorded an
indexed song.
- Only while the Folder
name is displayed on the
display window, quick
recording All songs on
Folder. (Folder Search
Mode is released when
there is no button input
for a few seconds after
entering the folder search
mode.) (Page 21)
- After JUKE BOX On
(Page 36), quick
recorded All songs of
JUKE BOX.
AUX 1,
AUX 2,
PORTABLE,
RADIO
(FM),
MIXER ON
mode
-Recorded until stop
To stop recording
To stop recording, press and hold USB REC on the
remote control or USB REC / DEMO on the unit for
3 seconds. Otherwise, the recording continues.
Pausing recording
During CD/USB playback or pause, external sound
source recording, or MIXER ON mode, press USB
REC on the remote control or USB REC / DEMO on
the unit to pause recording.
Press it again to restart recording.
yVOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
CHANGER.
yVOICE CANCELLER or KEY CHANGER can
not be operated during recording.
, Note
Operating34
Operating
3
To select recording bit rate
1. Press and hold USB REC on the remote control
or USB REC / DEMO on the unit for 3 seconds.
2. Press C/V on the remote control or C/V
on the side 1 of the unit to select a bit rate.
3. Press USB REC on the remote control or USB
REC / DEMO on the unit to finish the setting.
Recording in MIXER ON mode
Recording is available in MIXER ON mode.
If you record in MIXER ON mode, the unit records the
mixed sound from that point when you press USB
REC on the remote control or USB REC / DEMO on
the unit.
1. Start mixing. (Page 25)
2. Start the recording by pressing USB REC on the
remote control or USB REC / DEMO on the unit.
To stop recording, press and hold USB REC on the
remote control or USB REC / DEMO on the unit
to stop recording.
Otherwise, the recording continues.
The making of unauthorized copies of
copy-protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
yFor stable recording, the output sound level
goes down on its own when you record music
from CD to USB.
yYou can only change volume level between
MIN and 30 during recording. (Only CD
function)
yWhen you stop recording, the le that has
been recorded at that time will be stored.
(In MIXER OFF mode, except when USB/CD
that are in stop status.)
yDo not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete le may be made and not deleted
on PC.
yIf USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the
display window.
yMulti card reader device or external HDD can
not be used for USB recording.
yA le is recorded by about 512 Mbyte when
you record for a long term.
, Note
Operating 35
Operating
3
yYou can record various sound using DJ
EFFECT, DJ SCRATCH, DJ PRO or MIC.
(In MIXER OFF mode, except when USB/CD
that are in stop status.)
yYou can control recorded microphone sound
according to microphone volume.
yYou may not store more than 2,000 les.
yIn case of the unsupported MP3/WMA le,
the le recording may be stopped.
yWhen you are recording during playback, the
sound now playing is output.
yWhen function is set to BLUETOOTH or
LG TV, recording is available in MIXER ON
mode.
yIt’ll be stored as follows.
AUDIO CD MP3/WMA
53"$,@
53"$,@
"6%*0@
$%@3&$
$%@3&$
"6%*0@
1MBZPSQBVTFTUBUVT
5IFPUIFSTUBUVT
"#$'JMFOBNF
%&''JMFOBNF
"6%*0@
"6%*0@
'*-&@3&$
'*-&@3&$
1MBZPSQBVTFTUBUVT
5IFPUIFSTUBUVT
53"$,@
53"$,@
"6%*0@
$%@3&$
$%@3&$
"6%*0@
1MBZPSQBVTFTUBUVT
5IFPUIFSTUBUVT
"#$'JMFOBNF
%&''JMFOBNF
"6%*0@
"6%*0@
'*-&@3&$'*-&@3&$
1MBZPSQBVTFTUBUVT
5IFPUIFSTUBUVT
The other source* Tuner
05)&34@3&$
"6%*0@
"6%*0@
%+@.*9@3&$
.*9@
.*9@
56/&3@3&$
"6%*0@@'.
MIXER ON mode
05)&34@3&$
"6%*0@
"6%*0@
%+@.*9@3&$
.*9@
.*9@
Play or pause status
Play or pause status
The other statusThe other status
* : AUX and the like.
Tuner : The current recording frequency is shown
, Note
Operating36
Operating
3
JUKE BOX Playback
JUKE BOX function enables you to make a playlist of
your favorite tracks/les from a disc or USB device.
(USB 1). A playlist of up to 100 tracks/les can be
entered.
Making JUKE BOX list
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
(Playing will be stopped when you press
JUKEBOX/MEMORY on the remote control.)
2. Select a track/file by pressing C/V on the
remote control.
3. Press JUKEBOX/MEMORY on the remote
control to save the track/file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET·FOLDER W/S on the remote control to
select the JUKE BOX program number.)
5. Press JUKEBOX/MEMORY on the remote
control once again.
To play the JUKE BOX list, press N on the remote
control after you make the list.
yWhen making or modifying the JUKE BOX list,
REPEAT mode is off.
yJUKE BOX function is not supported on
USB2.
, Note
Enjoying JUKE BOX
Press JUKEBOX/MEMORY on the remote control
once. “JUKEBOX ON” appears on the display window.
To play JUKE BOX list, press N on the remote
control.
To cancel it, press JUKEBOX/MEMORY on the
remote control once.
“JUKEBOX OFF” appears on the display window.
Editing JUKE BOX
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
(Playing will be stopped when you press
JUKEBOX/MEMORY on the remote control.)
2. Press PRESET·FOLDER W/S on the remote
control to select a track/file to edit.
3. Press
C/V on the remote control.
4. Press JUKEBOX/MEMORY on the remote
control.
5. Repeat 2 to 4 to store the other tracks/files.
6. Press JUKEBOX/MEMORY on the remote
control once again.
To play the JUKE BOX list, press N on the remote
control after you edit the list.
Deleting JUKE BOX list
Deleting function works in the edit mode.
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
Or
Press DELETE on the remote control while JUKE
BOX is played to enter the edit mode.
2. Select a song by pressing
PRESET·FOLDER W/S on the remote control
repeatedly.
3. Press DELETE on the remote control while a
song is selected.
yIf there is no JUKE BOX list, “JUKEBOX NO
PROGRAM” appears on the display window
when you press JUKEBOX/MEMORY on the
remote control.
yJUKE BOX is switched off in the case below.
- Changing to a different function.
- Turning off and on the unit.
- Operating the numerical buttons on the
remote control.
- Playing a le by using SEARCH and
SCRATCH / SEARCH & LEVEL CONTROL
on the unit.
yJUKE BOX list is cleared in the case below.
- Removing the disc or the USB device.
- Deleting or recording music les in the USB
device.
, Note
Operating 37
Operating
3
Other Operations
Turn off the sound temporarily
Press [ on the remote control to mute your sound.
You can mute your unit, for example, to answer
the telephone, the “Q” will appear in the display
window.
To cancel it, press [ on the remote control again or
change the volume level.
CHILDSAFE Mode
This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
To turn on CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN” and
this mode is turned on.
In case of CD, USB or BLUETOOTH function,
CHILDSAFE mode does not work after about
2 minutes from power on the unit even if this
mode is enabled.
, Note
DEMO
In the power off state, press USB REC / DEMO on
the unit once. The unit will power on and display the
each of functions with demo sound in the display
window.
To cancel the DEMO function, press USB REC /
DEMO on the unit once more.
You can enjoy other functions during the DEMO,
the DEMO will temporarily pause.
- Without input key in 10 sec, the DEMO will
playback automatically.
, Note
Resume stop
The unit records the point where you pressed Z
depending on the disc or USB. If you press Z twice,
the unit will clear the stopped point.
Operating38
Operating
3
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment.
Adjust the microphone volume by rotating
MIC VOLUME on the unit in a clockwise or
counterclockwise.
yWhen not using the microphone, set the
MIC volume to minimum or turn off the MIC
and remove the microphone from the MIC
jack.
yIf the microphone is set too near the speaker,
a howling sound may be produced.
In this case, move the microphone away from
the speaker or decrease the sound level by
using the MIC VOLUME on the unit.
yIf sound through the microphone is extremely
loud, it may be distorted.
In this case, rotate MIC VOLUME on the unit.
yYou can give an echo effect to the sound
from the microphones by pressing ECHO on
the remote control or MIC ECHO on the unit.
, Note
VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
Press VOICE CANCELLER and “VOICE CANCELLER
ON” will appear in display window.
To cancel it, press VOICE CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music les.
yThis function is available CD, USB or
BLUETOOTH function.
yIf the function is not available, “NOT
SUPPORT” appears in the display window.
yThis function is available to use only when a
microphone is connected.
yIf a microphone is not connected, “PLEASE
INSERT MIC” appears in the display window.
yIt is not available on the mono source.
yTo initialize it, change the function or
disconnect the microphone.
yThis function may not be initialized depending
on the status of connected devices.
, Note
Operating 39
Operating
3
KEY CHANGER
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
yTo sharp the key one by one, press KEY
CHANGER(L) repeatedly during playback.
yTo atten the key one by one, press KEY
CHANGER(l) repeatedly during playback.
yThis function is available CD, USB or
BLUETOOTH function.
yTo initialize it, change the function, disconnect
the microphone or change the music.
yThis function may not be initialized depending
on the status of connected devices.
yIf the function is not available, “NOT
SUPPORT” appears in the display window.
yIf a microphone is not connected, “PLEASE
INSERT MIC” appears in the display window.
, Note
VOCAL EFFECTS
When you connect your microphone to the MIC
jack, you can enjoy karaoke function by changing
voice in the various source.
To select various mode, pressing VOCAL EFFECTS
repeatedly or pressing VOCAL EFFECTS and then
turning DJ SCRATCH / SEARCH & LEVEL on the
unit when vocal effects mode appears in the display
window.
BASS
SOPRANO HELIUM ROBOT
DUET MAN DUET WOMAN BASS ECHO1
SOPRANO ECHO1 HELIUM ECHO1
ROBOT ECHO1 DUET MAN1 DUET
WOMAN1 BASS ECHO2 SOPRANO
ECHO2 HELIUM ECHO2 ROBOT ECHO2
DUET MAN2 DUET WOMAN2 OFF
yIf a microphone is not connected, “PLEASE
INSERT MIC” appears in the display window.
yIf you press KEY CHANGER, DJ EFFECT or
MIC ECHO on the unit on VOCAL EFFECTS
mode, after backing up current VOCAL
EFFECTS, turn off VOCAL EFFECTS mode
and operate KEY CHANGER, DJ EFFECT or
ECHO mode.
yTo turn off VOCAL EFFECTS mode, press and
hold VOCAL EFFECTS.
, Note
Operating40
Operating
3
ECHO
When you connect your microphone to the MIC
jack, you can give an echo effect to the sound from
the microphones by pressing ECHO on the remote
control or MIC ECHO on the unit.
ECHO MODE 1 ECHO MODE 2 ECHO OFF
yIf a microphone is not connected, “PLEASE
INSERT MIC” appears in the display window.
yIf you press VOCAL EFFECTS on ECHO
mode, after backing up current ECHO,
turn off ECHO mode and operate VOCAL
EFFECTS mode.
Press ECHO on the remote control or MIC
ECHO on the unit again, after backing up
current VOCAL EFFECTS, operate ECHO
mode.
, Note
Using H/P MODE
Headphone monitoring is available.
Press H/P MODE on the unit to listen to music using
headphone. Rotate H/P VOLUME on the unit to
adjust the volume.
When mixing, press H/P MODE on the unit to select
a monitoring mode. You can listen to the music being
mixed or playing in Source A or Source B.
yIt is not compatible with a 4 pole jack.
yIf you select one source output in MIXER ON
mode, the playback effects (Except TEMPO)
are not applied to the output through the
headphone.
yIf you power off or switch to MIXER OFF, the
selected H/P MODE is cancelled.
, Note
Operating 41
Operating
3
LIGHTING
This function offers a party atmosphere by operating
speaker lighting and beat of music.
To select mode, pressing LIGHTING on the unit
repeatedly or pressing LIGHTING on the unit and
then turning DJ SCRATCH / SEARCH & MULTI on
the unit.
OFF
PARTY PEACEFUL ROMANTIC
COOL UPBEAT FIERY EXCITED
DYNAMIC HEALING SUNNY OFF ...
yLighting function is available in all functions.
yLighting mode retains its previous mode
when you rst press LIGHTING on the unit,
press again to change modes.
, Note
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned off.
To cancel the sleep function, press SLEEP on the
remote control repeatedly until “SLEEP OFF” appears.
yYou can check the remaining time before the
unit is turned off. Press SLEEP on the remote
control to check or change the remaining
time.
yYou can edit the remain time when displays
the remaining time or “DIMMER ON”.
, Note
Dimmer
Press SLEEP on the remote control once.
The display window will be darkened by half.
To cancel it, press SLEEP on the remote control
repeatedly until “OFF” appears.
All the lighting turns off when dimmer is being
operated.
, Note
Auto power down
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 15 minutes.
The unit will also turn itself off after six hours if the
main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only MAIN
unit in case of WIRELESS PARTY LINK connection.
In case of OTHER unit, Auto power down is available
after disconnection OTHER unit and MAIN unit.
How to disconnect the wireless
network connection or the wireless
device.
Turn off the unit by pressing the power button for
more than 5 seconds.
Operating42
Operating
3
AUTO POWER On
This unit automatically turns on by an input source :
BLUETOOTH or LG TV.
When you turn on your TV connected to this unit,
this unit recognizes the input signal and selects the
suitable function. You can hear the sound from the
unit.
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device.
You can play your music.
When you turn off this unit by pressing 1 on the
unit for 5 seconds each time, you can turn on or off
the AUTO POWER function.
On Display Description
AUTO POWER ON AUTO POWER function is
turned on.
AUTO POWER OFF AUTO POWER function is
turned off.
yDepending on the connected device, this
function may not operate.
yDepending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
yIf you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
yIf you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this
unit is turned on.
yIf you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yIf you have already paired with this unit,
automatically this unit can turn on by an
input source when this unit is turned off.
, Note
Auto function change
This unit recognizes input signals such as
BLUETOOTH, LG TV and Portable and then changes to
the suitable function automatically.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected.
Play your music on the Bluetooth device.
When 3.5 mm stereo cable is
connected
When you connect the portable device to the PORT.
IN connector, PORTABLE function is selected.
Play your music on the portable device.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
yThis function is not available during recording
or deleting.
yThis function only works with devices that
were previously connected.
yIf the Bluetooth connection lock function
is set, Bluetooth and LG TV connection will
be only available on Bluetooth and LG TV
function.
, Note
Operating 43
Operating
3
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
3. Select time mode by pressing C/V on the
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET on the remote control to confirm your
selection.
5. Select the hours by pressing C/V on the
remote control.
6. Press SET on the remote control.
7. Select the minutes by pressing C/V on the
remote control.
8. Press SET on the remote control.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Page 29-30)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM on the remote control.
3. Press
C/V on the remote control to change
the hours and minutes and press SET on the
remote control to save.
4. Press
C/V on the remote control to select
function and press SET on the remote control to
save.
- Press C/V on the remote control to select a
preset number when you select tuner and then,
press SET on the remote control.
If there is no preset number, this step is skipped.
5. Press
C/V on the remote control to change
the volume and press SET on the remote control
to save.
yIf you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yYou can set alarm after you set the clock
time.
yIf you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK even when the unit is turned off.
yIf you set the clock time and alarm, you can
check the alarm icon “(“ and alarm setting
information by pressing ALARM even when
the unit is turned off.
yYou can select ALARM ON/OFF mode by
pressing ALARM.
, Note
Operating44
Operating
3
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
1. Turn on the unit by pressing 1.
2. Press F
until LG TV function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [Sound] [TV Sound output]
[LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if the TV and this unit are
connected normally.
yYou can also use the remote control of
this unit while using LG Sound Sync. If you
use TV’s remote control again, the unit
synchronizes with the TV.
(According to TV Specications, the volume
and mute of this unit synchronize with TV.)
yIf the connection fails, check the conditions of
this unit and your TV : power, function.
yMake sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
- The unit is turned off.
- Changing to a different function.
- Disconnecting the wireless connection
caused by interference or a distance.
yThe amount of time to turn off this unit is
different depending on your TV.
yIf you try to change the function on using
the LG TV function, volume will be changed
according to the LG TV volume level.
yDetails of TV setting menu vary depending on
models of your TV.
yIf you turned off the unit directly by pressing
1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yThe volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yWhen you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yYou should set the TV Sound output manually
depending on the TV version.
yIf you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit
may louder the volume due to synchronizing
volume with TV’s.
, Note
Operating 45
Operating
3
WIRELESS PARTY LINK
Connection
The output sound of (MAIN) unit is expanded to
(OTHER) unit.
It is compatible with unit that supports WIRELESS
PARTY LINK.
The name of function about sound expansion
between the compatible products wired or wirelessly
was changed to PARTY LINK or WIRELESS PARTY
LINK.
1. Press
3 WIRELESS LINK on the unit.
PARTY LINK MODE SELECT appears in the display
window.
2. Press
3 WIRELESS LINK on the unit to select
MAIN or OTHER.
- unit : Selects MAIN.
- unit : Selects OTHER.
Two units try to connect with each other.
3. When these units are successfully connected
each other, each of connected device names
appears in the each unit.
yIf you are using the LG Sound Sync, this
function is not available. If you connect the LG
TV function, “NOT SUPPORT” appears in the
display window.
yYou can use microphone in the OTHER unit
only. In case of OTHER unit, some functions
are supported only.
yWhen WIRELESS PARTY LINK is
disconnected, OTHER unit is changed to
BLUETOOTH function.
yIf the connection is failed, “FAILED” appears in
the display window.
yMute function is synchronized with each
other.
yWIRELESS PARTY LINK connection will be
disconnected when you turn off the unit or
press 3 WIRELESS LINK on the unit.
yWhen WIRELESS PARTY LINK is connected,
you can not connect Wired PARTY LINK.
ySound of MAIN unit and OTHER unit may be
different depending on playback status or
source.
yCheck the following information when
connecting to Bluetooth.
- You can connect only one Bluetooth device
in the MAIN unit. You cannot connect
Bluetooth device to the OTHER unit.
- WIRELESS PARTY LINK connection is only
supported on Android devices. (WIRELESS
PARTY LINK connection may not be
supported depending on the connected
device specications or OS.)
- Removable/detachable Bluetooth devices
(ex. Dongle etc.) will not support WIRELESS
PARTY LINK connection.
- When WIRELESS PARTY LINK is connected,
Bluetooth connection is not available in
status of recording or deleting.
- If you connect WIRELESS PARTY LINK
while you are playing connected Bluetooth
device, it may be reconnected again,
depending on phone specication.
yMAIN / OTHER are may be displayed to
MASTER (Primary) / SLAVE (Secondary) in
the existing products.
, Note
4 Troubleshooting
Troubleshooting46
Troubleshooting
4
Troubleshooting
General
Problem Cause & Solution
The unit does not work
properly
yTurn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplier, etc.) and turn them on again.
yDisconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplier, etc.) and then try connecting again.
yPrevious setting may not be saved when device power is shut off.
No Power
yThe power cord is not plugged in. Plug in the power cord.
yCheck whether electricity failed.
Check the condition by operating other electronic devices.
No sound
yCheck whether you select right function.
Press function button and check the selected function.
yCheck to see if the speakers are connected correctly. Speaker cables connected
correctly.
The unit does not start
playback
yAn unplayable disc is inserted. Check the playable disc.
yNo disc is inserted. Insert a disc.
yThe disc is dirty. Clean the disc. (Page 50)
yThe disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
Radio stations cannot be
tuned in properly
yThe antenna is positioned or connected poorly.
Connect the antenna securely.
yThe signal strength of the radio station is too weak.
Tune to the station manually.
yNo stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 31 for details.
Troubleshooting 47
Troubleshooting
4
Problem Cause & Solution
The remote control does
not work properly
yThe remote control is too far from the unit.
Operate the remote control within about 7 m.
yThere is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
yThe batteries in the remote control are exhausted.
Replace the batteries with new ones.
No speaker light
yCheck whether the speaker light cables are connected to the unit correctly.
Connect the speaker light cables to the unit correctly.
yCheck the speaker light effects by pressing LIGHTING on the unit. (Page 41)
LG Sound Sync does not
work
yCheck whether your LG TV supports LG Sound Sync.
yCheck connection of LG Sound Sync.
yCheck sound setting of your TV and this unit.
5 Appendix
Appendix48
Appendix
5
General specifications
General
Power requirements Refer to the main label on the unit.
Power consumption
Refer to the main label on the unit.
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D) Approx. 470 mm x 213 mm x 423 mm
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 90 %
Inputs / Outputs
Analog audio in (AUX IN 1/2) 2.0 Vrms (1 kHz, 0 dB), RCA jack (L, R) .
Analog audio out (AUX OUT) 2.0 Vrms (1 kHz, 0 dB), RCA jack (L, R)
Portable in (PORT. IN) 1.0 Vrms (3.5 mm stereo jack) x 1
Microphone (MIC 1/2) Sensitivity 20 mV (1 kHz), 6.3 mm jack x 2
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
System
Frequency Response 40 to 20,000 Hz
Signal-to-noise ratio More than 75 dB
Dynamic range More than 80 dB
Bus Power Supply (USB) 5 V 0 500 mA
Amplier (RMS Output power)
Total output 5,000 W RMS
HIGH 1,250 W RMS X 2 (8 Ω at 1 kHz, 30 % THD)
LOW 1,250 W RMS X 2 (8 Ω at 70 kHz, 30 % THD)
yDesign and specications are subject to change without notice.
Appendix 49
Appendix
5
Speakers specifications
Front speaker
Type HIGH : 2 Way 3 Speaker
LOW : 1 Way 1 Speaker
Impedance HIGH : 8 Ω
LOW : 8 Ω
Rated Input power HIGH : 1,250 W RMS
LOW : 1,250 W RMS
Max. Input power HIGH : 2,500 W RMS
LOW : 2,500 W RMS
Dimensions (W x H x D) Approx. 515 mm x 774 mm x 503 mm
yDesign and specications are subject to change without notice.
Trademarks and Licenses
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by LG Electronics is under license.
Other trademarks and trade names are those of their respective owners.
Appendix50
Appendix
5
Maintenance
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period of
time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces
are extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution. Do not use strong
solvents such as alcohol, benzine, or thinner, as these
might damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished. For details, please
contact your nearest authorized service center.
