LG F2721STWV User Manual
Displayed below is the user manual for F2721STWV by LG which is a product in the Washing Machines category. This manual has pages.
Related Manuals
DWG.
No.
TRIG.
DR COMPLETED
도면 DR 완료
완료일 :
LG 전자 (주)
LG Electronics Inc.
UNIT SCALE NS
mm
REVIEWEDDESIGNED
RELATED DWG.
CHECKED APPROVED
류 환 찬
16.03.02
이 다 정
16.03.02 16.03.02 16.03.03
14.11.03
이 찬 호 김 현 석
MODELING I
T
L
E
T
APPROVED
승인자
PREPARED
시방자
DATE
년/월/일
REF. NO.
시방 번호
REV. NO.
기호
REVISION DESCRIPTION
변경 사항
1
2
3
4
RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
PDF
ILLUSTRATOR
182 182
752
MFL69283936
MANUAL,OWNER’S
TT27_WO_21kg 1/1
MFL69283936
<< 주기 >>
1. 재질, 인쇄방법, 인쇄도수, 외곽치수등은 작업표에 준한다.
2. 인쇄내용, 문자크기 및 형상, 선의 굵기 등은 설계에서 제시된 FILM에 준함.
3. 외곽치수는 절단후 치수임.
4. 양산전에 설계 한도를 득할 것.
<< NOTES >>
1. Material, printing and exterier size are refer to work tables.
2. Printing, text size and line are based on LG design film.
3. Exterier size on the drawing is cutting line.
4. Before product controlled by criteria sample.
가
P/NO. 다
<FRONT> <BACK>
나
WORK
가
BRAND
LG
36
FH0C8CDSK(0~9)
F2721STWV
나
MODEL
다
P/NO.
MATERIAL AND PRINTING DESCRIPTION
1
PRINTING DEGREE
LG MODEL 명
A**QESL
SUFFIX
ENGLISH
LANGUAGE
48
PAGE
TT27
수정 업체 : 인쇄물 개발파트
양산 업체 : 남성기획
REMARK
SEC.
5. 본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를 만족할 것
5. The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)and details
should comply with LG standard of LG(63)-A-5501-34
SNOW WHITE 80g OFFSET 인쇄
MFL69283936
5
김 현 석이 다 정2016/03/08EAGG300223 인쇄내용 수정
www.lg.com
OWNER’S MANUAL
WASHING
MACHINE
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the product is installed
correctly and safely. Leave these instructions near the product after
installation for future reference.
F2721STWV
ENGLISH
MFL69283936
TABLE OF CONTENTS
This manual is produced for a group of products
and may contain images or content different from
the model you purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS ......................................03
Important Safety Instructions ...............................................................05
INSTALLATION .......................................................08
Specifications ......................................................................................08
Accessories .........................................................................................08
Installation Place Requirements .......................................................... 09
Unpacking and Removing Transit Bolts...............................................10
Using Non-Skid Pads (Optional).......................................................... 11
Wooden Floors (Suspended Floors) .................................................... 11
Leveling the Washing Machine ............................................................12
Connecting Inlet Hose .........................................................................12
Installation of Drain Hose ....................................................................15
OPERATION ...........................................................16
Using the Washing Machine ................................................................ 16
Sorting Iaundry ....................................................................................17
Adding Cleaning Products ................................................................... 18
Control Panel .......................................................................................20
Program Table .....................................................................................21
Option Cycle ........................................................................................ 24
Using Smart Function (Optional) .........................................................28
MAINTENANCE ......................................................29
Cleaning your Washing Machine ......................................................... 29
Cleaning the Water Inlet Filter .............................................................29
Cleaning the Drain Pump Filter ...........................................................30
Cleaning the Dispenser .......................................................................30
Tub Clean (Optional) ...........................................................................31
Caution on Freezing During Winter .....................................................32
Using the Smart Diagnosis™ Function ...............................................34
TROUBLESHOOTING ............................................35
Diagnosing Problems ..........................................................................35
Error Messages ...................................................................................37
WARRANTY ............................................................39
03
ENGLISH
SAFETY INSTRUCTIONS
The following safety guidelines are intended to prevent unforeseen risks or
damage from unsafe or incorrect operation of the product.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described
below.
This symbol is displayed to the indicate matters and operations that
can cause risk. Read the part with this symbol carefully and follow the
instructions in order to avoid risk.
WARNING - This indicates that the failure to follow the instructions
can cause serious injury or death.
CAUTION - This indicates that the failure to follow the instructions
can cause the minor injury or damage the product.
To reduce the risk of re, electric shock, or injury to persons when using
your product, basic safety precautions should be followed, including the
following.
WARNING
CHILDREN IN THE HOUSEHOLD
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
For use in Europe:
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
04
GROUNDING REQUIREMENTS
For your safety, the information in this manual must be followed to
minimize the risk of re, explosion, or electric shock, or to prevent
property damage, injury to persons, or death.
WARNING
•This appliance must be grounded. In the event of malfunction or breakdown, grounding
will reduce the risk of electric shock by providing a path of least resistance for electric
current.
•This appliance is equipped with a cord having an equipment-grounding conductor and
grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
•Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualied electrician or service person if you are in doubt as to
whether the appliance is properly grounded.
•Do not modify the plug provided with the appliance. If it does not t the outlet, have a
proper outlet installed by a qualied electrician.
05
ENGLISH
Important Safety Instructions
To reduce the risk of re, electric shock, or injury to persons when using
your product, basic safety precautions should be followed, including the
following.
WARNING
Operation
•Do not use a sharp object like drill or pin
to press or separate an operation unit. It
can cause the electric shock or injury.
•Only an authorized repair person from
LG Electronics service centre should
disassemble, repair, or modify the
product. Improper service may cause
injury, electric shock or re.
•Do not spray the water inside or outside
the product to clean it. Water can
damage the insulation, causing electric
shock or re.
•Keep the area underneath and around
your appliances free of combustible
materials such as lint, paper, rags,
chemicals, etc. Improper use can cause
re or explosion.
•Do not put living animals, such as pets
into the product. It may cause injury.
•Do not leave this appliance door open.
Children may hang on the door or crawl
inside the appliance, causing damage
or injury.
Installation
•Never attempt to operate this appliance
if it is damaged, malfunctioning, partially
disassembled, or has missing or broken
parts, including a damaged cord or plug.
It can cause electric shock or injury.
•This appliance is heavy. Two or more
people may be needed to install and
move the appliance. Failure to do so
can result in injury.
•Store and install this appliance where
it will not be exposed to temperatures
below freezing or exposed to outdoor
weather conditions. Failure to do so can
result in leakage.
•Tighten the drain hose to avoid
separation. Splashing of water may
cause electric shock.
•If the supply cord is damaged, it must
be replaced by the manufacturer or
its service agents or similarly qualied
person in order to avoid a hazard.
•The appliance must not be installed
behind a lockable door, a sliding door
or a door with a hinge on the opposite
side to that of the tumble dryer, in such
a way that a full opening of the tumble
dryer door is restricted.
06
•Never reach into this appliance while
it is operating. Wait until the drum has
completely stopped. Failure to do so
may result in injury.
•Do not put in, wash or dry articles that
have been cleaned in, washed in,
soaked in, or spotted with combustible
or explosive substances (such as
wax, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene,
vegetable oil, cooking oil, etc.). Improper
use can cause re or explosion.
•In case of ood, stop using the product
and contact the LG Electronics service
centre. Contact with water can cause
electric shock.
•Do not push down the door excessively,
when the appliance door is open. Doing
so may topple over the appliance and it
can cause the injury.
•Use new hose-sets supplied with the
appliance. Old hose-sets should not
be reused. Water leakage may cause
property damage.
•Do not touch the door during steam
cycles, drying or high-temperature
washing. The door surface can become
very hot. Allow the door lock to release
before opening the door. Failure to do
so may result in injury.
•Do not use inammable gas and
combustible substances (benzene,
gasoline, thinner, petroleum, alcohol,
etc.) around the product. It may cause
explosion or re.
•If the drain hose or inlet hose is frozen
during winter, use it only after thawing.
Freezing may cause re or electric
shock, and frozen parts may cause
product malfunction or reduction in
product life span.
•Keep all washing detergents, softener
and bleach away from children. These
products contain poisonous materials.
•Do not plug multiple products into
multiple socket-outlets or extension
cords. This can cause re.
•Remove the power plug when you clean
the product. Not removing the plug may
result in electric shock or injury.
•Do not touch the power plug with wet
hands. It can cause the electric shock
or injury.
•When pulling out the power plug from
an outlet, hold the power plug, not the
cable. Damage of the cable can cause
the electric shock or injury.
•Do not bend the power cable
excessively or place a heavy object on
top of it. Damage of the power cable
can cause electric shock or re.
07
ENGLISH
Disposal
•Before discarding an old appliance,
unplug it. Render the plug useless.
Cut off the cable directly behind the
appliance to prevent misuse.
•Dispose of the packaging material (such
as vinyl and styrofoam) away from
children. The packaging material can
suffocate a child.
•Remove the door to the washing
compartment before this appliance is
removed from service or discarded to
avoid the danger of children or small
animals getting trapped inside. Failure
to do so can result in serious injury to
persons or death.
Technical Safety for Using the
Tumble Dryer
•Do not dry unwashed items in the
appliance.
•Items that have been soiled with
substances such as cooking oil,
vegetable oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine,
waxes and wax removers should be
washed in hot water with an extra
amount of detergent before being dried
in the appliance.
•Fabric softeners or other similar
products should be used according to
the fabric softener instructions.
•Remove all objects from pockets such
as lighters and matches.
•Never stop this appliance before the
end of the drying cycle unless all items
are quickly removed and spread out so
that the heat is dissipated.
•This appliance is not to be used if
industrial chemicals have been used for
cleaning.
•Items such as foam rubber (latex foam),
shower caps, waterproof textiles, rubber
backed articles and clothes or pillows
tted with foam rubber pads should not
be dried in this appliance.
08
INSTALLATION
Specications
Transit bolts
Power plug
Detergent
dispenser
Control panel
Drum
Door
Drain hose
Drain plug
Drain pump lter
Cover cap
(Location may
vary depending on
products)
Adjustable feet
•Power supply : 220 ‒ 240 V~, 50 Hz
•Size : 700 mm (W) x 835 mm (D) x 990 mm (H)
•Product weight : 100 kg
•Wash Capacity : 21 kg
•Max. Watt : 2200 W
•Permissible water pressure : 0.1 - 1.0 MPa (1.0 - 10.0 kgf / cm2)
•Appearance and specications may vary without notice to improve the quality of the
product.
Accessories
Inlet hose (1EA)
(Option : Hot
(1EA))
Spanner Elbow Bracket
(for securing drain
hose)
Anti–slip sheets
(2EA)
Caps for covering
transit bolt holes
Tie strap
09
ENGLISH
Installation Place Requirements
Location
Level oor : Allowable slope under the entire washing
machine is 1°.
Power outlet : Must be within 1.5 meters of either side
of the location of the washing machine.
•Do not overload the outlet with more than one
appliance.
Additional Clearance : For the wall, 10 cm: rear
/2.5 cm: right & left side
•Do not place or store laundry products on top of the
washing machine at any time.
•These products may damage the nish or controls.
Positioning
•Install the washing machine on a at hard oor.
•Make sure that air circulation around the washing
machine is not impeded by carpets, rugs, etc.
•Never try to correct any unevenness in the oor with
pieces of wood, cardboard or similar materials under
the washing machine.
•If it is impossible to avoid positioning the washing
machine next to a gas cooker or coal burning
insulation (85x60 cm) covered with aluminum foil on
the side facing the cooker or stove must be inserted
between the two appliances.
•Do not install your washing machine in rooms where
freezing temperatures may occur. Frozen hoses may
burst under pressure. The reliability of the electronic
control unit may be impaired at temperatures below
freezing point.
•Please ensure that when the washing machine is
installed, it is easily accessible for an engineer in the
event of a breakdown.
•With the washing machine installed, adjust all four feet
using the transit bolt spanner provided to ensure the
appliance is stable, and a clearance of approximately
20 mm is left between the top of the washing machine
and the underside of any work-top.
•This equipment is not designed for maritime use or for
use in mobile installations such as caravans, aircraft
etc.
Electrical Connection
•Do not use an extension cord or double adapter.
•Always unplug the washing machine and turn off the
water supply after use.
•Connect the washing machine to an earthed socket in
accordance with current wiring regulations.
•The washing machine must be positioned so that the
plug is easily accessible.
•Repairs to the washing machine must only be carried
out by qualied personnel. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local service centre.
•If the washing machine is delivered in winter and
temperatures are below freezing, place the washing
machine at room temperature for a few hours before
putting it into operation.
2.5 cm 2.5 cm
10 cm82.6cm
142cm
59.4cm
10
Unpacking and Removing Transit
Bolts
1Lift the washing machine off the foam base.
•After removing the carton and shipping material,
lift the washing machine off the foam base. Make
sure the tub support comes off with the base
and is not stuck to the bottom of the washing
machine.
•If you must lay the washing machine down to
remove the carton base, always protect the side
of the washing machine and lay it carefully on
its side. DO NOT lay the washing machine on its
front or back.
Tub Support
(Optional)
Carton base
2Remove the bolt assemblies.
•Starting with the bottom two transit bolts, use the
spanner (included) to fully loosen all transit bolts
by turning them counterclockwise. Remove the
bolt assemblies by wiggling them slightly while
pulling them out.
Retainer
Transit
bolt
3Install the hole caps.
•Locate the hole caps included in the accessory
pack and install them in the transit bolt holes.
Cap
NOTE
•Save the bolt assemblies for future use. To
prevent damage to internal components, DO NOT
transport the washing machine without reinstalling
the transit bolts.
•Failure to remove transit bolts and retainers may
cause severe vibration and noise, which can lead
to permanent damage to the washing machine.
The cord is secured to the back of the washing
machine with a transit bolt to help prevent
operation with transit bolts in place.
11
ENGLISH
Using Non-Skid Pads (Optional)
If you install the washing machine on a slippery surface,
it may move because of excessive vibration. Incorrect
leveling may cause malfunction through noise and
vibration. If this occurs, install the non-skid pads under
the leveling feet and adjust the level.
1 Clean the oor to attach the non-skid pads.
•Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains, the
non-skid pads may slip.
2Adjust the level after placing the washing machine
in the installation area.
3Place the adhesive side of the non-skid pad on the
oor.
•It is most effective to install the non-skid pads
under the front legs. If it is difcult to place the
pads under the front legs, place them under the
back legs.
This side up
Adhesive side
4Ensure the washing machine is level.
•Push or rock the top edges of the washing
machine gently to make sure that the washing
machine does not rock. If the washing machine
rocks, level the washing machine again.
Wooden Floors (Suspended
Floors)
•Wooden oors are particularly susceptible to vibration.
•To prevent vibration we recommend you place rubber
cups at least 15 mm thick of the each foot of the
washing machine, secured to at least two oor beams
with screws.
Rubber Cup
•If possible install the washing machine in one of the
corners of the room, where the oor is more stable.
•Fit the rubber cups to reduce vibration.
•You can obtain rubber cups (p/no.4620ER4002B) from
the LG Service Centre.
NOTE
•Proper placement and leveling of the washing
machine will ensure long, regular, and reliable
operation.
•The washing machine must be 100% horizontal
and stand rmly in position.
•It must not ‘Seesaw’ across corners under the
load.
•The installation surface must be clean, free from
oor wax and other lubricant coatings.
•Do not let the feet of the washing machine get
wet. Failure to do so may cause vibration or noise.
12
Leveling the Washing Machine
If the oor is uneven, turn the adjustable feet as required
(Do not insert pieces of wood etc. under the feet). Make
sure that all four feet are stable and resting on the oor
and then check that the appliance is perfectly level (Use
a spirit level).
•Once the washing machine is level, tighten the lock
nuts up towards the base of the washing machine. All
lock nuts must be tightened.
Raise
Lock Nut
Lower
Tighten all 4
locknuts securely
•Diagonal Check
When pushing down the edges of the washing
machine top plate diagonally, the washing machine
should not move up and down at all (Check both
directions). If the washing machine rocks when
pushing the machine top plate diagonally, adjust the
feet again.
NOTE
•Timber or suspended type ooring may contribute
to excessive vibration and unbalance.
•If the washing machine is installed on a raised
platform, it must be securely fastened in order to
eliminate the risk of falling off.
Connecting Inlet Hose
•Water supply pressure must be between 0.1 MPa and
1.0 MPa (1.0‒10.0 kgf/cm
2
).
•Do not strip or crossthread when connecting inlet hose
to the valve.
•If the water supply pressure is more than 1.0 MPa, a
decompression device should be installed.
•Periodically check the condition of the hose and
replace the hose if necessary.
Checking Rubber Seal Inlet Hose
Two rubber seals are supplied with the water inlet hoses.
They are used for preventing water leaks. Make sure the
connection to taps is sufciently tight.
Hose connector
Rubber seal
Hose connector
Rubber seal
13
ENGLISH
Connecting Hose to Water Tap
Connecting screw-type hose to tap with thread
Screw the hose connector onto the water supply tap.
Connecting screw-type hose to tap without
thread
1Loose the four xing screws.
Upper
connector
Rubber
seal
Fixing screw
2Remove the guide plate if the tap is too large to t
the adapter.
Guide plate
3Push the adapter onto the end of the tap so that
the rubber seal forms a watertight connection.
Tighten the four xing screws.
4Push the inlet hose vertically upwards so that the
rubber seal within the hose can adhere completely
to the tap and then tighten it by screwing it to the
right.
Plate
Inlet hose
Connecting one touch type hose to tap without
thread
1Unscrew the adapter ring plate and loose the four
xing screws.
Ring plate
2Remove the guide plate if the tap is too large to t
the adapter.
Guide plate
14
3Push the adapter onto the end of the tap so that
the rubber seal forms a watertight connection.
Tighten the adapter ring plate and the four xing
screws.
4Pull the connector latch plate down, push the inlet
hose onto the adapter, and release the connector
latch plate. Make sure the adapter locks into place.
Latch plate
NOTE
•After connecting the inlet hose to the water
tap, turn on the water tap to ush out foreign
substances (dirt, sand, sawdust, etc.) in the water
lines. Let the water drain into a bucket, and check
the water temperature.
Connecting Hose to Washing Machine
Make sure that there are no kinks in the hose and that
they are not crushed.
When your washing machine has two valves.
•The Inlet hose with the red connector is for the hot
water tap.
NOTE
•After completing connection, if water leaks from
the hose, repeat the same steps.
Use the most conventional type of tap for the
water supply. In case the tap is square or too big,
remove the guide plate before inserting the tap
into the adaptor.
Using the horizontal tap
Horizontal tap
Extension tap
Square tap
15
ENGLISH
Installation of Drain Hose
•The drain hose should not be placed higher than 100
cm above the oor. Water in the washing machine
may not drain or may drain slowly.
•Securing the drain hose correctly will protect the oor
from damage due to water leakage.
•If the drain hose is too long, do not force it back into
the washing machine. This will cause abnormal noise.
about 100 cm
about 145 cm
max. 100 cm
about 105 cm
•When installing the drain hose to a sink, secure it
tightly with string.
•Securing the drain hose correctly will protect the oor
from damage due to water leakage.
Laundry tub
Hose
retainer
max. 100 cm
Tie strap
max. 100 cm
16
OPERATION
Using the Washing Machine
Before the rst wash, select a cycle (Cotton 60 °C, add
a half load of detergent), allow the washing machine
to wash without clothing. This will remove residue and
water from the drum that may have been left during
manufacturing.
1Sort laundry and load items.
•Sort laundry by fabric type, soil level, colour and
load size as needed. Open the door and load
items into the washing machine.
2Add cleaning products and/or detergent and
softener.
•Add the proper amount of detergent to the
detergent dispenser. If desired, add bleach or
fabric softener to the appropriate areas of the
dispenser.
3Turn on the washing machine.
•Press the Power button to turn ON the washing
machine.
4Choose the desired washing cycle.
•Press the Cycle button repeatedly or turn the
cycle selector knob until the desired cycle is
selected.
5Begin cycle.
•Press the Start/Pause button to begin the cycle.
The washing machine will agitate briey without
water to measure the weight of the load. If the
Start/Pause button is not pressed within 5
minutes, the washing machine will shut off and
all settings will be lost.
6End of cycle.
•When the cycle is nished, a melody will sound.
Immediately remove your clothing from the
washing machine to reduce wrinkling. Check
around the door seal when removing the load for
small items that may be caught in the seal.
17
ENGLISH
Sorting Iaundry
1Look for a care label on your clothes.
•This will tell you about the fabric content of your
garment and how it should be washed.
•Symbols on the care labels.
Wash temperature
Normal machine wash
Permanent press
Delicate
Hand wash
Do not wash
2Sorting laundry.
•To get the best results, sort clothes into loads
that can be washed with the same wash cycle.
•Different fabrics need to be washed at varying
temperatures and spin speeds.
•Always sort dark colours from pale colours and
whites. Wash separately as dye and lint transfer
can occur causing discolouration of white and
pale garments. If possible, do not wash heavily
soiled items with lightly soiled ones.
– Soil (Heavy, Normal, Light)
Separate clothes according to amount of soil.
– Colour (White, Lights, Darks)
Separate white fabrics from coloured fabrics.
– Lint (Lint producers, Collectors)
Wash lint producers and lint collectors
separately.
3Caring before loading.
•Combine large and small items in a load. Load
large items rst.
•Large items should not be more than half the
total wash load. Do not wash single items. This
may cause an unbalanced load. Add one or two
similar items.
•Check all pockets to make sure that they are
empty. Items such as nails, hair clips, matches,
pens, coins and keys can damage both your
washing machine and your clothes.
•Close zippers, hooks and strings to make sure
that these items don’t snag on other clothes.
•Pre-treat dirt and stains by brushing a small
amount of detergent dissolved water onto stains
to help lift dirt.
•Check the folds of the exible gasket (gray) and
remove any small articles.
•Check inside the drum and remove any items
from a previous wash.
•Remove any clothing or items from the exible
gasket to prevent clothing and gasket damage.
18
Adding Cleaning Products
Detergent Dosage
•Detergent should be used according to the instruction
of the detergent manufacturer and selected according
to type, colour, soiling of the fabric and washing
temperature.
•If too much detergent is used, too many suds can
occur and this will result in poor washing results or
cause heavy load to the motor.
•If you wish to use liquid detergent follow the guidelines
provided by the detergent manufacturer.
•You can pour liquid detergent directly into the main
detergent dispenser if you are starting the cycle
immediately.
•Do not use liquid detergent if you are using Time
delay, or if you have selected Pre Wash, as the liquid
may harden.
•If too many suds occur, reduce the detergent amount.
•Detergent usage may need to be adjusted for water
temperature, water hardness, size and soil level of the
load. For best results, avoid oversudsing.
•Refer to the label of the clothes, before chooseing the
detergent and water temperature:
•When using the washing machine, use designated
detergent for each type of clothing only:
– General powdered detergents for all types of fabric
– Powdered detergents for delicate fabric
– Liquid detergents for all types of fabric or
designated detergents only for wool
•For better washing performance and whitening, use
detergent with the general powdered bleach.
•Detergent is ushed from the dispenser at the
beginning of the cycle.
•Do not place or store laundry products, such as
detergent, bleach, or liquid fabric softener, on top of
your washer or dryer. Wipe up any spills immediately.
These products can damage the machine's nish and
controls.
NOTE
•Do not let the detergent harden.
Doing so may lead to blockages, poor rinse
performance or odour.
•Full load : According to manufacturer’s
recommendation.
•Part load : 3/4 of the normal amount
•Minimum load : 1/2 of full load
Adding Detergent and Fabric Softener
Adding detergent
•Main wash only →
•Pre wash+Main wash →
NOTE
•Too much detergent, bleach or softener may
cause an overow.
•Be sure to use the appropriate amount of
detergent.
Adding fabric softener
•Do not exceed the maximum ll line. Overlling can
cause early dispensing of the fabric softener, which
may stain clothes. Close the dispenser lid slowly.
NORMAL NORMAL
NORMAL
19
ENGLISH
•Do not leave the fabric softener in the detergent
dispenser for more than 2 days (Fabric softener may
harden).
•Softener will automatically be added during the last
rinse cycle.
•Do not open the dispenser lid when water is being
supplied.
•Solvents (benzene, etc) should not be used.
NOTE
•Do not pour fabric softener directly on the clothes.
Adding water softener
•A water softener, such as Anti-limescale (e.g. Calgon)
can be used to cut down on the use of detergent in
extremely hard water areas. Dispense according to
the amount specied on the packaging. First add
detergent and then the water softener.
•Use the quantity of detergent required for soft water.
MAX
NORMAL
•To avoid injury, do not place ngers under the lid
or between the lid and the top plate when pressing
or sliding the detergent dispenser lid open or
closed.
Using tablet
1Open the door and put tablets into the drum.
2Load the laundry into the drum and close the door.
CAUTION
20
Control Panel
Power button
•Press the Power button to turn the washing
machine on.
•Press and hold the Power button for 1 second
to turn the washing machine off.
Start/Pause button
•This Start/Pause button is used to start the
wash cycle or pause the wash cycle.
•If a temporary stop of the wash cycle is needed,
press the Start/Pause button.
Display
•The display shows the settings, estimated
time remaining, options, and status messages.
When the product is turned on, the default
settings in the display will illuminate.
•The display shows estimate time remaining.
While the size of the load is being calculated
automatically, blinking or ‘Detecting’
appears.
Program dial
•Programs are available according to laundry
type.
•Lamp will light up to indicate the selected
program.
Options
•This allows you to select an additional cycle
and will light when selected.
•Use these buttons to select the desired cycle
options for the selected cycle.
21
ENGLISH
Program Table
Washing Program
Program Description Fabric Type Proper
Temp.
Maximum
Load
Cotton Provides better performance by
combining various drum motions.
Coloured fast garments (shirts,
nightdresses, pajamas, etc)
and normally soiled cotton load
(underwear).
40°C
(Cold to
60°C)
Rating
Allergy Care Removes pet hair and allergens such
as house mite and pollen. Cotton, underwear, pillow covers, bed
sheets, baby wear.
No
choice Less than
4.0 kg
Hot Wash Washes laundry in a hot cycle 95°C
Refresh Helps to remove wrinkles within 20
mins with steam.
Cotton mixed, Polyester mixed Dress
shirts, blouses. No
choice
3 items
Baby Care Removes solid and protein stains,
provides better rinse performance. Lightly soiled baby wear. Less than
5.0 kg
Duvet This cycle is for large items such as
bed cover, pillows, sofa covers, etc.
Cotton bedding except special
garments (delicates, wool, silk, etc.)
with lling: duvets, pillows, blankets,
sofa covers with light lling.
Cold
(Cold to
40°C)
1 king size
Sports Wear
This cycle is suitable for sports wear
such as jogging clothes and running
wear.
Coolmax, Gore-tex, Fleece and
Sympatex.
*30°C
(Cold to
30°C) Less than
3.0 kg
Wool
Enables to wash wool fabrics. (Please
use detergent for machinewashable
woolens).
Machine washable woolens with pure
now wool only
40°C
(Cold to
40°C)
Speed Wash
This cycle provides fast washing
time for small loads and lightly soiled
clothes.
Coloured laundry which is lightly soiled
fast.
CAUTION : Use less than 20 g of
detergent (for 2.0 kg load) otherwise
detergent may remain on the clothes.
*40°C
(Cold to
40°C)
Less than
2.0 kg
22
Program Description Fabric Type Proper
Temp.
Maximum
Load
Heavy Duty
This cycle is for washing heavily soiled
laundry though more powerful tub
rotation.
Heavily soiled Cotton Fabrics
60°C
(40°C to
60°C)
Less than
3.0 kg
Silent
Provides less noise and vibration
and saves money by using overnight
electricity.
Color fast garments (shirts,
nightdresses, pajamas, etc) and lightly
soiled white cotton(underwear).
40°C
(Cold to
60°C)
Less than
3.0 kg
Color Care
If it's possible for clothes to
decolourate, please use this cycle. The
cycle prevent decolorization. (Please
use detergent for colored fabrics.)
Dark garments made from cotton or
mixed fabrics.
30°C
(Cold to
40°C)
Less than
5.0 kg
Rinse+Spin
Use for laundry that need rinsing only
of to add rinse-added fabric softener to
laundry
Normal fabrics which can be washable. No
choice -
Downloaded For downloadable cycles. If you did not download any cycles, the default is Cold Wash.
•* : Proper temperature can be selected after deleting the steam option, automatically-included in the cycle.
•Water Temperature: Select the appropriate water temperature for chosen wash cycle. Always follow garment
manufacturer’s care label or instructions when washing.
•The water efciency label program set at "Cotton" (program select) Display could shown : Wash, Rinse, Spin to test
accordance in conformity with IEC 60456.
("Cotton" is the recommended program designed to minimize water consumption for Normally Soiled Clothing.)
NOTE
•Neutral detergent is recommended.
23
ENGLISH
Extra Options
Program Delay Wash Steam Add Load Turbo
WashTM Favorite Crease Care
Cotton
● ● ● ●** ● ●
Allergy Care
● ●* ● ● ● ●
Hot Wash
●●●●●●
Refresh
● ●* ●
Baby Care
● ●* ● ● ● ●
Duvet
● ● ● ●
Sports Wear
● ●** ● ● ● ●
Wool
●●●
Speed Wash
● ●** ● ●** ●
Heavy Duty
●●●●●●
Silent
● ● ● ●
Color Care
● ●●●●
Rinse+Spin
● ● ● ●
Downloaded
● ● ● ●
* : This option is automatically included in the cycle and can not be deleted.
** : This option is automatically included in the cycle and can be deleted.
24
Option Cycle
Delay Wash
You can set a time delay so that the washing machine
will start automatically and nish after a specied time
interval.
1Press the Power button.
2Select a washing program.
3Press the Delay Wash button and set time
required.
4Press the Start/Pause button.
NOTE
•The delay time is the time to the end of the
program, not the start. The actual running time
may vary due to water temperature, wash load
and other factors.
Turbo Wash™
Adding the Turbo Wash™ option reduces cycle time and
provides good performance in normal cycle. Using Turbo
Wash™ saves time without sacricing performance.
1Press the Power button.
2Select a washing program.
3Press the Turbo Wash™ button..
4Press the Start/Pause button.
NOTE
•Turbo Wash™ function of Some courses is
selected automatically.
Add Load
Use this function to add loads or remove the foreign
material.
1Press the Add Load button.
2Close the door after add loads or remove the
foreign material (e.g. coin or pin etc.)
3Press the Start/Pause button.
•Results when choosing Add Load during cycles.
- When the tub is spinning : Tub stops and Door Lock
is off.
- When water temperature in the tub is higher than
45°C : Add Load is not available with short warning
sound for safety.
- When lots of water is in the tub : Door Lock is off
after draining by safe water level.
NOTE
•Open the door when Door Lock is off after
checking the safety.
•Add Load doesn't work when Tub Cleaning
course is in progress for safety.
•Put the laundry into the tub completely. Laundry
caught in between door closing part can damage
door packing (rubber part) and might cause failure.
25
ENGLISH
Favorite
Favorite program allows you to store a customized wash
cycle for future use.
1Press the Power button.
2Select a washing program.
3Select the cycle (Washing method, number of
rinses, spin speed, water temperature etc.).
4Press and hold the Favorite button for 3 seconds.
The favorite program is stored for future use. To reuse
th program, select favorite program and press the Start/
Pause button.
Crease Care
If you want to prevent creasing, select Crease Care
option.
1Press the Power button.
2Select a washing program.
3Press the Crease Care button.
4Press the Start/Pause button.
Steam
Steam Wash features enhance washing performance
with low energy consumption.
Refresh cycle reduces creases in clothes.
1Press the Power button.
2Select steam course.
3Press the Steam button.
4Press the Start/Pause button.
Steam Wash
•For heavily stained clothes, underwear, or baby
clothes.
•Refresh cycle is always Steam Wash.
•Do not use Steam Wash for delicates such as wool,
silk, and easily discoloured clothes.
26
Wash
Soak
Use this mode to wash normal clothes or thick and
heavy clothes which are excessively dirty.
Pre Wash
If the laundry is heavily soiled, the Pre Wash cycle is
recommended.
Intensive
If the laundry is normal and heavily soiled, the Intensive
option is effective.
Normal
This option is automatically selected in every course
except for Rinse+Spin, Baby Care.
Light
This cycle is suitable for lightly soiled clothing.
NOTE
•Selectable options will differ depending on
selected course.
Rinse
By pressing the Rinse button the Rinse times can be
selected.
•1 / 2 / 3 / 4 / 5 (times)
Spin
•Spin speed level can be selected by pressing the Spin
button repeatedly.
- Extra High / High / Medium / Low / Extra Low
•Spin Only
1Press the Power button.
2Press the Spin button to select spin speed.
3Press the Start/Pause button.
Temp.
The Temp. button selects the wash and rinse
temperature combination for the selected cycle. Press
this button until the desired setting is lit. All rinses use
cold tap water.
•Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results.
Refresh Cycle
1Press the Power button.
2Select the Refresh program.
3Press the Start/Pause button.
NOTE
•For better performance load 3 item or less.
When Refresh cycle nishes, laundry will continue
to be tumbled slowly for up to 30 minutes to
prevent wrinkling.
You can open the door in this time by pressing
any button.
27
ENGLISH
Child Lock ( )
Select this function to lock the buttons on the control
assembly to prevent tampering.
Locking the control panel
1Press and hold the Wash and Rinse button for 3
seconds.
2A beeper will sound, and ‘ ’ will appear on the
display.
When the child lock is set, all buttons are locked
except the Power button.
NOTE
•Turning off the power will not reset the child lock
function. You must deactivate child lock before
you can access any other functions.
Unlocking the control panel
Press and hold the Wash and Rinse button for 3
seconds.
•A beeper will sound and the remaining time for the
current program will reappear on the display.
Beep On / Off
1Press the Power button.
2Select a washing program.
3Press the Beep On / Off button to set the Beep on/
off function.
4Press the Start/Pause button.
NOTE
•Once the Beep on/off function is set, the setting is
memorized even after the power is turned off.
•If you want to turn the Beeper off, simply repeat
this process.
Downloaded
The Downloaded features of this appliance allow you to
download new and special cycles that are not included
in the basic cycles on the appliance.
Appliances that have been successfully registered
can download a variety of specialty cycles specic to
the appliance. Only one cycle can be stored on the
appliance at a time.
Once Cycle Download is completed in the washer, the
product keeps the downloaded cycle until you change it
to a new download cycle.
NOTE
•You must rst connect to a gateway and register
your appliance in order to use the Downloaded
function.
28
Using Smart Function (Optional)
Using the Tag On Function
The Tag On function allows you to conveniently use the
LG Smart Diagnosis™ and Cycle Download features to
communicate with your appliance right from your own
smart phone.
•The Tag On function can only be used with most smart
phones equipped with the NFC function and based on
the Android operating system (OS).
Installation of the application
•Search "LG Smart Laundry" on the Google Play Store
from your smart phone.
-(ᜅษ✙
LG Smart
Using the Application
LG Smart Laundry application allows you to use various
features for your convenience.
•Cycle Download
•Smart Diagnosis
•Tag On Cycle Set
•Laundry Stats
NOTE
•Press
?
in the LG Smart Laundry application
for a more detailed guide on how to use the Tag
On function.
•Depending on the smart phone manufacturer and
Android OS version, the NFC activation process
may differ. Refer to the manual of your smart
phone for details.
•Because of the characteristics of NFC, if the
transmission distance is too far, or if there is a
metal sticker or a protective case on the phone,
transmission will not be good. In some cases,
NFC-equipped phones may be unable to transmit
successfully.
•The content found in this manual may differ
depending on the version of "LG Smart Laundry"
application, and it may be modied without
informing customers.
29
ENGLISH
MAINTENANCE
•Unplug the washing machine before cleaning to
avoid the risk of electric shock. Failure to follow
this warning may result in serious injury, re,
electric shock, or death.
•Never use harsh chemicals, abrasive cleaners, or
solvents to clean the washing machine. They may
damage the nish.
WARNING
Cleaning your Washing Machine
Care After Wash
•After the cycle is nished, wipe the door and the inside
of the door seal to remove any moisture.
•Leave the door open to dry the drum interior.
•Wipe the body of the washing machine with a dry cloth
to remove any moisture.
Cleaning the Exterior
Proper care of your washing machine can extend its life.
Door:
•Wash with a damp cloth on the outside and inside and
then dry with a soft cloth.
Exterior:
•Immediately wipe off any spills.
•Wipe with a damp cloth.
•Do not press the surface or the display with sharp
objects.
Care and Cleaning of the Interior
•Use a towel or soft cloth to wipe around the washing
machine door opening and door glass.
•Always remove items from the washing machine as
soon as the cycle is complete. Leaving damp items
in the washing machine can cause wrinkling, colour
transfer, and odour.
•Run the Tub Clean cycle once a month (or more often
if needed) to remove detergent buildup and other
residue.
Cleaning the Water Inlet Filter
•Turn off the stopclock if the washing machine is to be
left for any length of time (e.g. holiday), especially if
there is no oor drain (gully) in the immediate vicinity.
•‘ ’ icon will be displayed on the control panel when
water is not entering the detergent dispenser.
•If water is very hard or contains traces of lime deposit,
the water inlet lter may become clogged. It is
therefore a good idea to clean it occasionally.
1Turn off the water tap and unscrew the water inlet
hose.
2Clean the lter using a hard bristle brush.
30
Cleaning the Drain Pump Filter
•The drain lter collects threads and small objects left
in the laundry. Check regularly that the lter is clean to
ensure smooth running of your washing machine.
•Allow the water to cool down before cleaning the drain
pump, carrying out emergency emptying, or opening
the door in an emergency.
1Open the cover cap and pull out the hose.
2Unplug the drain plug and open the lter by turning
it to the left.
1
2
Container to
collect the
drained water.
3Remove any extraneous matter from the pump
lter.
4After cleaning, turn the pump lter and insert the
drain plug.
5Close the cover cap.
•First drain using the drain hose and then open the
pump lter to remove any threads or objects.
•Be careful when draining, as the water may be
hot.
CAUTION
31
ENGLISH
Cleaning the Dispenser
Leaving detergent in the detergent dispenser for an
extended period of time or using the washing machine
for a long period of time may cause the build-up of
scales in the detergent dispenser. Pull out and clean the
detergent dispenser once a week.
1Slide the detergent dispenser lid open.
2Remove the detergent dispenser covers and pull
out the detergent cup.
3Clean them with warm water.
- Use a soft cloth or brush for cleaning and remove
any residue.
4Wipe any moisture with a dry towel or cloth after
cleaning.
5Replace the detergent cups and detergent
dispenser covers.
•Do not spray water inside the washing machine.
Doing so may cause re or electric shock.
WARNING
NOTE
•Use water only when you clean the detergent
dispenser. Make sure to use Rinse + Spin to rinse
the washer tub before the wash cycle when you
use a cleaning detergent to clean the washer tub.
Tub Clean (Optional)
Tub Clean is a special cycle to clean the inside of the
washing machine.
A higher water level is used in this cycle at higher spin
speed. Perform this cycle regularly.
1Remove any clothing or items from the washing
machine and close the door.
2Open the dispenser lid and add Anti limescale (e.g.
Calgon) to the main wash compartment.
3Close the dispenser lid slowly.
4Power On and then press the Tub Clean button.
Then ‘ ’ will be displayed on the display.
5Press the Start/Pause button to start.
6After the cycle is complete, leave the door open to
allow the washing machine door opening, exible
gasket and door glass to dry.
•If there is a child, be careful not to leave the door
open for too long.
CAUTION
NOTE
•Do not add any detergent to the detergent
compartments. Excessive suds may generate and
leak from the washing machine.
32
Caution on Freezing During
Winter
•When frozen, the product does not operate normally.
Make sure to install the product where it will not freeze
during winter.
•In case the product must be installed outside on a
porch or in other outdoor conditions, make sure to
check the following.
How to Keep the Product from Freezing
•After washing, remove water remaining inside the
pump completely with the opening hose plug used for
removal of residual water. When the water is removed
completely, close the hose plug used for removal of
residual water and cover cap.
Cover cap
Drain plug
•Hang down drain hose to pull out water inside the
hose completely.
Drain hose
•When the drain hose is installed in a curved
shape, the inner hose may freeze.
CAUTION
•After closing the tap, disconnect the cold inlet hose
from the tap, and remove water while keeping the
hose facing downwards.
Cold inlet
hose
Check for Freezing
•If water does not drain when opening the hose plug
used for removal of residual water, check the drainage
unit.
Drain plug
Cover cap
•Turn the power on, select Rinse and Spin, and press
the Start/Pause button.
MAX
NORMAL
Dispenser
Drain hose
NOTE
•Check that water is coming into the dispenser
while rinsing, and water is draining through the
drain hose while spinning.
•When ‘ ’ is shown in display window while the
product is in operation, check water supply unit and
drainage unit (Some models do not have an alarm
function that indicates freezing).
33
ENGLISH
How to Handle Freezing
•Make sure to empty the drum, pour warm water of
50–60 °C up to the rubber part inside the drum, close
the door, and wait for 1–2 hours.
50‒60 °C
•Do not use boiling water. It may cause burns or
damage to the product.
CAUTION
•Open the cover cap and hose plug used for removal
of residual water to extract water completely.
Drain plug
Cover cap
NOTE
•If when water does not drain, this means the ice is
not melted completely. Wait more.
•When water is removed completely from the drum,
close the hose plug used for removal of residual
water, select Rinse and Spin, and press the Start/
Pause button.
MAX
NORMAL
Drain hose
Dispenser
NOTE
•Check that water is coming into the dispenser
while rinsing, and water is draining through the
drain hose while spinning.
•When water supply problems occur, take the following
measures.
– Turn off the tap, and thaw out the tap and both
connection areas of inlet hose of the product using
a hot water cloth.
– Take out inlet hose and immerse in warm water
below 50–60 °C.
Inlet hose
50‒60 °C
34
Using the Smart Diagnosis™
Function
Use this function if you need an accurate diagnosis
by an LG Electronics service centre when the product
malfunctions or fails. Use this function only to contact
the service representative, not during normal operation.
1Press the Power button to turn on the washing
machine. Do not press any other buttons or turn
the cycle selector knob.
2When instructed to do so by the call centre, place
the mouthpiece of your phone close to the Power
button.
Max
10 mm
3Press and hold the Temp. button for 3 seconds,
while holding the phone mouthpiece to the icon or
Power button.
4Keep the phone in place until the tone transmission
has nished. Time remaining for data transfer is
displayed.
•For best results, do not move the phone while
the tones are being transmitted.
•If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
LG Electronics
service centre
5Once the countdown is over and the tones have
stopped, resume your conversation with the call
centre agent, who will then be able to assist you
using the information transmitted for analysis.
NOTE
•The Smart Diagnosis™ function depends on the
local call quality.
•The communication performance will improve and
you can receive better service if you use the home
phone.
•If the Smart Diagnosis™ data transfer is poor due
to poor call quality, you may not receive the best
Smart Diagnosis™ service.
35
ENGLISH
TROUBLESHOOTING
•Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at
an early stage. If your washing machine does not function properly or does not function at all, check the following
before you call for service:
Diagnosing Problems
Symptoms Reason Solution
Rattling and clanking
noise
Foreign objects such as coins
or safety pins may be in drum or
pump.
•Stop washing machine, check drum and
drain lter.
•If noise continues after washing machine
is restarted, call your authorised service
centre.
Thumping sound
Heavy wash loads may produce a
thumping sound. This is usually
normal.
•If sound continues, washing machine
is probably out of balance. Stop and
redistribute wash load.
Vibrating noise
Have all the transit bolts and tub
support been removed?
•If not removed during installation, refer
to Installation guide for removing transit
bolts.
Are all the feet resting rmly on
the ground?
•Wash load may be unevenly distributed
in drum. Stop washing machine and
rearrange wash load.
Water leaks
Inlet hoses or drain hose are
loose at tap or washing machine.
•Check and tighten hose connections.
House drain pipes are clogged.
•Unclog drain pipe. Contact plumber if
necessary.
Oversudsing
•Too much detergent or unsuitable
detergent may cause excessive foaming
which may result in water leaks.
Water does not enter
washing machine or it
enters slowly
Water supply is not adequate in
that location.
•Check another tap in the house.
Water supply tap is not
completely open.
•Fully open tap.
Water inlet hose(s) are kinked.
•Straighten hose.
The lter of the inlet hose(s)
clogged.
•Check the lter of the inlet hose.
Water in the washing
machine does not drain
or drains slowly
Drain hose is kinked or clogged.
•Clean and straighten the drain hose.
The drain lter is clogged.
•Clean the drain lter.
36
Symptoms Reason Solution
Washing machine does
not start
Electrical power cord may not be
plugged in or connection may be
loose.
•Make sure plug ts tightly in wall outlet.
House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
•Reset circuit breaker or replace fuse. Do
not increase fuse capacity. If problem is
a circuit overload, have it corrected by a
qualied electrician.
Water supply tap is not turned on.
•Turn on water supply tap.
Washing machine will
not spin Check that the door is rmly shut.
•Close the door and press the Start/Pause
button. After pressing the Start/Pause
button, it may take a few moments before
the washing machine begins to spin. The
door must be locked before spin can be
achieved. Add 1 or 2 similar items to help
balance the load. Rearrange load to allow
proper spinning.
Door does not open
•Once washing machine has started,
the door cannot be opened for safety
reasons. Check if the ‘Door Lock’ icon is
illuminated. You can safely open the door
after the ‘Door Lock’ icon turns off.
Wash cycle time
delayed
•The washing time may vary by the
amount of laundry, water pressure, water
temperature and other usage conditions.
If an imbalance is detected or if the suds
removing program is on, the wash time
will increase.
Fabric softener
overow
Too much softener may cause an
overow.
•Follow softener guidelines to ensure
appropriate amount is used. Do not
exceed the maximum ll line.
Softeners dispensed
too early
•Close the dispenser lid slowly. Do not
open the lid during the wash cycle.
Dry problem Does not dry
•Do not overload. Check that the washing
machine is draining properly to extract
adequate water from the load. Clothes
load is too small to tumble properly. Add a
few towels.
37
ENGLISH
Error Messages
Symptoms Reason Solution
Water supply is not adequate in
area.
•Check another tap in the house.
Water supply taps are not
completely open.
•Fully open tap.
Water inlet hose(s) are kinked.
•Straighten hose(s).
The lter of the inlet hose(s) are
clogged.
•Check the lter of the inlet hose.
If water leakage occurred in
the inlet hose, indicator ‘ ’ will
become red.
•May vary depending on the model.
Drain hose is kinked or clogged.
•Clean and straighten the drain hose.
The drain lter is clogged.
•Clean the drain lter.
Load is too small.
•Add 1 or 2 similar items to help balance
the load.
Load is out of balance.
•Add 1 or 2 similar items to help balance
the load.
The appliance has an imbalance
detection and correction system.
If individual heavy articles are
loaded (e.g. bath mat, bath
robe, etc.) this system may stop
spinning or even interrupt the
spin cycle altogether.
•Rearrange load to allow proper spinning.
If the laundry is still too wet at
the end of the cycle, add smaller
articles of laundry to balance the
load and repeat the spin cycle.
•Rearrange load to allow proper spinning.
38
Symptoms Reason Solution
Ensure door is not open.
•Close the door completely.
If ‘ , , ’ is not released, call for
service.
•Unplug the power plug and call for
service.
Water overlls due to the faulty
water valve.
•Close the water tap.
•Unplug the power plug.
•Call for service.
Water level sensor has
malfunctioned.
•Close the water tap.
•Unplug the power plug.
•Call for service.
Over load in motor.
•Allow the washing machine to stand for
30 minutes to allow the motor to cool,
then restart the cycle.
Water leaks.
•Call for service.
The washer experienced a power
failure.
•Restart the cycle.
Control Error
•Unplug the power plug and call for
service.
Is Inlet/outlet hose or drainage
pump frozen?
•Supply warm water into the tub and
unfreeze outlet hose and drainage pump.
Wet a towel in warm water and apply to
inlet hose.
39
ENGLISH
This limited warranty does not cover:
•Service trips to deliver, pick up, or install or repair the product; instruction to the customer on operation of the
product; repair or replacement of fuses or correction of wiring or plumbing, or correction of unauthorized repairs/
installation.
•Failure of the product to perform during power failures and interruptions or inadequate electrical service.
•Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted
water supply or inadequate supply of air.
•Damage resulting from operating the Product in a corrosive atmosphere or contrary to the instructions outlined in the
Product’s owner’s manual.
•Damage to the Product caused by accidents, pests and vermin, lightning, wind, re, oods, or acts of God.
•Damage or failure caused by unauthorized modication or alteration, or if it is used for other than the intended
purpose, or any water leakage where the product was not properly installed.
•Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or industrial use,
or use of accessories, components, or consumable cleaning products that are not approved by LG.
•Damage caused by transportation and handling, including scratches, dents, chips, and/or other damage to the nish
of your product, unless such damage results from defects in materials or workmanship.
•Damage or missing items to any display, open box, discounted, or refurbished Product.
• Products with original serial numbers that have been removed, altered, or cannot be readily determined. Model and
Serial numbers, along with original retail sales receipt, are required for warranty validation.
•Increases in utility costs and additional utility expenses.
•Repairs when your Product is used in other than normal and usual household use or contrary to the instructions
outlined in the Product’s owner’s manual.
•Costs associated with removal of your Product from your home for repairs.
•The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in
accordance with published installation instructions, including LG’s owner’s and installation manuals.
•Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes use of
parts not approved or specied by LG.
Strange vibration or noise
caused by not removing transit
bolts or tub support. Tub
support
Carton
base
Transit
bolt
Remove the transit bolts &
tub support.
Leakage caused by dirt (hair,
lint) on gasket and door glass.
Clean the gasket & door
glass.
WARRANTY
40
Not draining caused by clogging
of pump lter. Clean the pump lter.
Water is not coming because
water inlet valve lters are
clogged or water inlet hoses are
kinked. Inlet Filter
Clean the inlet valve lter
or reinstall the water inlet
hoses.
Water is not coming because too
much detergent use.
Dispenser Clean the detergent
disperser.
Laundry is hot or warm after
nished washing because the
inlet hoses are installed in
reverse.
Cold
Water
Inlet
Hot
Water
Inlet Reinstall the inlet hoses.
Water is not supplied because
the water tap is not turned on.
water tap
Turn on the water tap.
Leakage caused by improper
installation of drain hose or
clogged drain hose.
Elbow
Bracket
Tie Strap
Reinstall the drain hose.
Leakage caused by improper
installation of water inlet hose or
using other brand inlet hoses.
Reinstall the inlet hose.
No power problem caused by
loose connection of power cord
or electrical outlet problem.
Reconnect the power cord
or change the electrical
outlet.
41
ENGLISH
Service trips to deliver, pick
up, install the product or for
instruction on product use. The
removal and reinstallation of the
Product.
Level
1°
The warranty covers
manufacturing defects
only. Service resulting from
improper Installation is not
covered.
If all screws are not installed
properly, it may cause excessive
vibration (Pedestal model only).
Install 4 screws at each
corner (Total 16EA).
Water hammering (banging)
noise when washing machine is
lling with water.
High
Pressure
Water
Natural
water ow
Sudden
stopping
water ow
Loud noise
Hit!!
Adjust the water pressure
by turning down the water
valve or water tap in the
home.
Memo
Memo
Memo
Memo
Memo
Memo
