•On the website you can download the manual including installation, using, troubleshooting, specifications, license etc and view its contents on your PC or

mobile device.

•User Guide : For more information about this TV, read the USER GUIDE embedded in the product. (Depending on model)

-To open the USER GUIDE → → [Support] → [User Guide]

Separate Purchase

•Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These

devices only work with certain models.

•The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

•A cable to connect antennas and external devices must be purchased separately.

Note

•Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

•The items supplied with your product may vary depending on the model.

•Image shown may differ from your TV.

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH

OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

•Do not place the TV and/or remote control in the following

environments:

-Keep the product away from direct sunlight.

-An area with high humidity such as a bathroom.

-Near any heat source such as stoves and other devices that produce

heat.

-Near kitchen counters or humidifiers where they can easily be exposed

to steam or oil.

-An area exposed to rain or wind.

-Do not expose to dripping or splashing and do not place objects filled

with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on

shelves above the unit).

-Near flammable objects such as gasoline or candles, or expose the TV

to direct air conditioning.

-Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/explosion,

malfunction or product deformation.

•Ventilation

-Install your TV where there is proper ventilation. Do not install in a

confined space such as a bookcase.

-Do not install the product on a carpet or cushion.

-Do not block or cover the product with cloth or other materials while

unit is plugged in.

•Take care not to touch the ventilation openings. When watching the TV

for a long period, the ventilation openings may become hot.

•Do not use high voltage electrical equipment near the TV (e.g., a bug

zapper). This may result in product malfunction.

•Do not attempt to modify this product in any way without written

authorization from LG Electronics. Accidental fire or electric shock

can occur. Contact your local customer service for service or repair.

Unauthorized modification could void the user’s authority to operate

this product.

•Use only an authorized attachments / accessories approved by LG

Electronics. Otherwise, this may result in fire, electric shock, malfunction,

or product damage.

•Never disassemble the AC adapter or power cord. This may result in fire

or electric shock.

•Handle the adapter carefully to avoid dropping or striking it. An impact

could damage the adapter.

•To reduce the risk of fire or electrical shock, do not touch the TV with wet

hands. If the power cord prongs are wet or covered with dust, dry the

power plug completely or wipe dust off.

•Batteries

-Store the accessories (battery, etc.) in a safe location out of the reach

of children.

-Do not short circuit, disassemble, or allow the batteries to overheat.

Do not dispose of batteries in a fire. Batteries should not be exposed

to excessive heat.

-Caution: Risk of fire or explosion if the battery is replaced by an

incorrect type.

•Moving

-When moving, make sure the product is turned off, unplugged, and

all cables have been removed. It may take 2 or more people to carry

larger TVs. Do not press or put stress on the front panel of the TV.

Otherwise, this may result in product damage, fire hazard or injury.

•Keep the packing anti-moisture material or vinyl packing out of the reach

of children.

•Do not allow an impact shock, any objects to fall into the product, and do

not drop anything onto the screen.

•Do not press strongly upon the panel with a hand or a sharp object such

as a nail, pencil, or pen, or make a scratch on it. It may causedamage

to screen.

•Cleaning

-When cleaning, unplug the power cord and wipe gently with a soft/

dry cloth. Do not spray water or other liquids directly on the TV. Do

not clean your TV with chemicals including glass cleaner, any type of

air freshener, insecticide, lubricants, wax (car, industrial), abrasive,

thinner, benzene, alcohol etc., which can damage the product and/

or its panel. Otherwise, this may result in electric shock or product

damage.

•Protect the power cord from physical or mechanical abuse, such as being

twisted, kinked, pinched, closed in a door, or walked upon. Pay particular

attention to plugs, wall outlets, and the point where the cord exits the

device.

•Do not move the TV whilst the Power cord is plugged in.

•Do not use a damaged or loosely fitting power cord.

•Be sure to grasp the plug when unplugging the power cord. Do not pull

on the power cord to unplug the TV.

•Do not connect too many devices to the same AC power outlet as this

could result in fire or electric shock.

•Disconnecting the Device from the Main Power

-The power plug is the disconnecting device. In case of an emergency,

the power plug must remain readily accessible.

•Do not let your children climb or cling onto the TV. Otherwise, the TV may

fall over, which may cause serious injury.

•Outdoor Antenna Grounding (Can differ by country):

-If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or where

it can come in contact with such power lines or circuits as death or

serious injury can occur.

•Never touch this apparatus or antenna during a lightning storm. You may

be electrocuted.

•Make sure the power cord is connected securely to the TV and wall socket

if not secured damage to the Plug and socket may occur and in extreme

cases a fire may break out.

•Do not insert metallic or inflammable objects into the product. If a

foreign object is dropped into the product, unplug the power cord and

contact the customer service.

•Do not touch the end of the power cord while it is plugged in. You may

be electrocuted.

•If any of the following occur, unplug the product immediately

and contact your local customer service.

-The product has been damaged.

-If water or another substance enters the product (like an AC adapter,

power cord, or TV).

-If you smell smoke or other odors coming from the TV.

-When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power source is

connected to the unit if not unplugged in.

Installation

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or

damaged and for safe transportation regardless of its type and size.

•It is recommended to move the TV in the box or packing material that

the TV originally came in.

•Before moving or lifting the TV, disconnect the power cord and all cables.

•When holding the TV, the screen should face away from you to avoid

damage.

•Hold the top and bottom of the TV frame firmly. Make sure not to hold

the transparent part, speaker, or speaker grill area.

•When transporting a large TV, there should be at least 2 people.

•When transporting the TV, do not expose the TV to jolts or excessive

vibration.

•When transporting the TV, keep the TV upright, never turn the TV on its

side or tilt towards the left or right.

•Do not apply excessive pressure to cause flexing / bending of frame

chassis as it may damage screen.

•When handling the TV, be careful not to damage the protruding buttons.

•Avoid touching the screen at all times, as this may result in damage to

the screen.

•When attaching the stand to the TV set, place the screen facing down on

a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10 cm (minimum) space from the wall for proper ventilation.

(Depending on model)

2 Connect the power cord to a wall outlet.

•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts

when assembling the product. (Doing so may damage the product.)

•If you install the TV on a stand, you need to take actions to prevent the

product from overturning. Otherwise, the product may fall over, which

may cause injury.

•Do not use any unapproved items to ensure the safety and product life

span.

•Any damage or injuries caused by using unapproved items are not

covered by the warranty.

•Make sure that the screws are inserted correctly and fastened securely.

(If they are not fastened securely enough, the TV may tilt forward after

being installed.) Do not use too much force and over tighten the screws;

otherwise screw may be damaged and not tighten correctly.

•When installing on a cabinet or a shelf using a stand, make sure its width

is greater than that of the TV. (Depending on model)

•If the TV is placed on the stand, its screen may be tilted back slightly. If

the stand is not level because an object is placed under the stand or it

is not on a flat surface, the product may fall and cause injury or product

damage. (Depending on model)

Securing TV to the Wall

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of

the TV.

• If there are bolts inserted at the eye-bolts position, remove the bolts

first.

2 Mount the wall brackets with the bolts to the wall. Match the location of

the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make

sure to keep the rope horizontal with the flat surface.

•Use a platform or cabinet that is strong and large enough to support the

TV securely.

•Brackets, bolts and ropes are not provided. You can obtain additional

accessories from your local dealer.

Stand (Separate Purchase)

(Depending on model)

Stand Model

SQ-G2ST55 OLED55G2*

SQ-G2ST65 OLED65G2*

SQ-G2ST8377 OLED77/83G2*

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully and

install the wall mount bracket on a solid wall perpendicular to the floor.

When you attach the TV to other building materials, please contact qualified

personnel. LG recommends that wall mounting be performed by a qualified

professional installer. We recommend the use of LG’s wall mount bracket.

LG’s wall mount bracket is easy to move with cables connected. When you

do not use LG’s wall mount bracket, please use a wall mount bracket where

the device is adequately secured to the wall with enough space to allow

connectivity to external devices. It is advised to connect all the cables before

installing fixed wall mounts.

•Remove the stand before installing the TV on a wall mount by

performing the stand attachment in reverse.

•For more information of screws and wall mount bracket, refer to the

Separate Purchase.

•If you intend to mount the product to a wall, attach VESA standard

mounting interface (optional parts) to the back of the product. When

you install the set to use the wall mounting bracket (optional parts), fix

it carefully so as not to drop.

•When mounting a TV on the wall, make sure not to install the TV by

hanging the power and signal cables on the back of the TV.

•Do not install this product on a wall if it could be exposed to oil or oil

mist. This may damage the product and cause it to fall.

•When installing the Full Contact Wall Mount, the TV may not be

contacted firmly against the wall due to some wall conditions.

Precautions for Safety

(Except for OLW480B, LSW440B)

•Professional installers should read this manual carefully to ensure proper

installation.

•Professional installers should forward this manual to customers after

installation and encourage them to read and store it in a convenient

place for future reference.

After reading the installation manual, keep it in a convenient place for

future reference.

•Ask a professional installer appointed by the store for installation of the

product.

Installation by someone other than a professional installer is extremely

dangerous and may result in personal injury.

•Do not install the product in an unstable site that cannot withstand its

weight.

If the installation site lacks sufficient rigidity, the product may fall and

cause personal injury.

•Contact a professional installer appointed by the store prior to moving or

replacing the product after installation.

Installation is a technical task and safety issues may arise if an individual

attempts to install or move the product personally.

•Do not hang on the product or subject it to severe impact after

installation.

Doing so may cause the product to fall and cause personal injury.

•When installing the product on a wall, do not hang the power line or

signal cables from the back of the TV.

This can damage the cords, resulting in a fire, electrical shock or

malfunction of the product.

•Be sure to wear work gloves when installing the product.

-Installing with unprotected hands may result in injury.

•Install the product according to the instructions in the installation

manual.

Failure to install the product according to the instructions in the

installation manual can result in serious personal injury or product

damage.

•Be sure to have at least two people when installing the product or

adjusting the product’s height.

Attempting to perform installation or adjustments personally may result

in personal injury or damage to the product.

•Make sure a wall is available prior to proceeding with installation. Make

use of the anchors and screws provided with the product.

Use of any unauthorized anchors or screws may not support the

product’s weight, which poses safety risks.

•When drilling in the wall for installation, be sure to use drill bits and

drills of the specified diameter. Follow the instructions for the hole

depth.

Drilling and installing the product in ways other than specified in the

installation manual may result in an unstable installation and potential

safety issues.

•Do not wipe the product with a wet towel or use any heating equipment

or humidifier under the place where the product is installed.

Liquid water or vapor may enter the product and excessive heat may

cause fire, electric shock, or malfunction.

•Do not install the product near a fire sprinkler or detector, a place where

vibration or shock may occur or near a high-voltage wire or power

source.

•Unplug the product’s power cord from the wall outlet before installing.

Installing the product while the power cord is plugged in may result in

electric shock or fire.

•Do not install the product with bare hands. Be sure to wear work gloves.

Attempting installation without work gloves may cause personal injury.

•Connect the product with the supplied cable. Use of an unauthorized

cable may result in damage by friction with the wall. Make sure to use

the supplied cable gender. (This may vary by model.)

Before Installation

(Except for OLW480B, LSW440B)

•Do not use the product for any purpose other than installing the TV on

a wall.

•Avoid product damage and safety accidents caused by careless installing

or use of improper or unauthorized wall mount.

•Follow the instructions in the installation manual for a convenient

installation of the wall mount.

•Immediately discontinue installation and contact the service centre if

you cannot fully understand the installation process.

Use a professional installer if any installation issues remain after the

inquiry.

•Installation of this product on a concrete wall or wood stud is

recommended. Installation of this product on other surfaces (Dry wall,

plywood, bricks, etc.) is not recommended. Improper installation may

result in the product falling.

•Install the product only on a vertical wall.

Do not install on a tilted wall that exceeds building standards or on the

heavily titled wall or ceiling.

LG is not responsible for problems caused by improper installation of the

product, e.g., heavily tilted walls and ceilings.

•Check the enclosed accessories before installation. We are not

responsible for any lost or damaged accessories after the inner

packaging is opened.

•When an infant or small child swallows the enclosed accessories,

various safety accidents such as choking may occur. Keep the enclosed

accessories out of the reach of infants and children.

•When tightening screws, tighten until fully snug.

Avoid using excessive force when tightening the screws. Doing so may

damage the wall and product or reduce the rigidity or performance of

the product.

•Avoid installing a TV that exceeds the specified tensile load, and do not

allow any external force to be applied to the product.

•Avoid accidents by using work tools with care during installation.

Tools for Installation

•“+” shaped screwdriver (manual or electric) / level / drill / Ø8mm drill

bit for concrete or Ø4mm drill bit for steel

Securing TV to the Wall

(Except for OLW480B, LSW440B)

•Please use the TV close to the wall after installation.

How to fix anchors and screws

(Except for OLW480B, LSW440B)

Please make sure that:

•Check that the material and thickness of the wall and finishing material

comply with the installation manual. Before beginning the mounting

process, you must be sure the wall is able to support the weight of the

TV.

•Should use the enclosed anchors and screws on crack-free concrete walls.

•Never install the product on a plasterboard or wall made of paper or

medium-density fiberboard (MDF). When it is necessary to install the

product on such wall, anchor screws must be fastened to retaining walls

(concrete) or wood Stud inside the finishing material.

•The wall mount should be attached to a stud.This usually will not be a

problem, but depending on individual circumstances, there may be cases

when the ability to mount into a studis not possible. In this case, there

are a variety of drywall anchors, such as toggle bolts, which may provide

a solution.If using drywall anchors, please be sure the anchors and the

wall have the ability to support the weight of your TV. Please note that

the supplied anchors may not be the correct ones for your individual

situation, so you should check with a local professional.

•Other unspecified walls must be capable of supporting pullout loads of

over 70kgf (686N) and shear loads of over 100kgf (980N) per fastener.

•Use an Ø 8mm drill bit for concrete and a hammer (impact) drill or Ø

4mm drill bit for wood stud to drill holes.

For installation on concrete wall

Wall mounting anchor

Wall mounting screw

1 Drill holes in anchor locations with a drill bit of Ø8 mm to a depth of

80mm to 100mm.

2 Clean the drilled holes.

3 Insert the enclosed anchors for fixing the wall mount into the holes. (Use

a hammer when inserting anchors.)

4 Push the wall mount support closely toward the wall to match the hole

locations.

5 Tighten screws for fixing the wall mount to the holes. At this time, tighten

the screws to a torque of between 45kgf/cm to 60kgf/cm.

For installation on wood stud

Drywall

Wood stud

76 mm

Use the Ø4mm drill bit for wood to drill holes with the depth of 76mm.

(Clean the drilled hole.)

Without using the wall mounting anchor, fasten the wall mounting screw

directly to the wood stud.

After Installation

•When connecting additional cables from the sides, we recommend

holding the centre of the TV horizontally or vertically and pulling the

product to make sure there is sufficient distance from the wall before

connecting.

•When connecting additional cables from the bottom, we recommend

releasing the TV from the wall mount before connecting.

(For example)

•Use cable management systems to arrange the cables at the bottom of

the TV as shown below. Cable managements are not provided with the

product, so purchase them separately.

•After installing the product, be sure to use it adhered to the wall.

-Using the product while it is not adhered to the wall may damage or

shake the product.

•Do not use a sharp object when you detached the cable cover. This could

damage the cable or the cabinet. It may also cause personal harm.

(Depending on model)

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

•Use a signal splitter to use more than 2 TVs.

•If the image quality is poor, install a signal amplifier properly to improve

the image quality.

•If the image quality is poor with an antenna connected, try to realign the

antenna in the correct direction.

•An antenna cable and converter are not supplied.

•For a location that is not supported with Ultra HD broadcasting, this TV

cannot receive Ultra HD broadcasts directly.

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable

(75Ω). (Depending on model)

Starting TV

Turning on the TV

You can simply operate the TV functions, using the button.

Power On (Press)

Power Off1) (Press and Hold)

Menu Control (Press2))

Menu Selection (Press and Hold3))

1) All running apps will close, and any recording in progress will stop.

(Depending on country)

2) You can access and adjust the menu by pressing the button when TV is on.

3) You can use the function when you access menu control.

Note

•If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.

•Your TV’s OSD (On Screen Display) may differ slightly from that shown

in this manual.

•The device must be easily accessed to a location outlet near the access.

Some devices are not made by turning on / off button, turning off the

device and unplugging the power cord.

Connections

Connect various external devices to the TV and switch input modes to select

an external device. For more information of external device’s connection, refer

to the manual provided with each device.

HDMI

•When connecting the HDMI cable, the product and external devices

should be turned off and unplugged.

•Supported HDMI Audio format (Depending on model):

True HD (48 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),

PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)

Note

•If the device connected to Input Port also supports HDMI Deep Colour,

your picture may be clearer. However, if the device doesn’t support it, it

may not work properly. In that case, change the TV’s [HDMI Deep Colour]

setting to off.

• → → [General] → [Devices] → [HDMI Settings] → [HDMI

Deep Colour]

•Use a certified cable with the HDMI logo attached.

•If you do not use a certified HDMI cable, the screen may not display or a

connection error may occur.

•Recommended HDMI Cable Types

-Ultra High Speed HDMI®/™ cable (3m or less)

USB

Some USB Hubs may not work. If a USB device connected using a USB Hub is

not detected, connect it to the USB port on the TV directly.

Note

•For an optimal connection, HDMI cables and USB devices should have

bezels less than 10 mm thick and 18 mm width. Use an extension cable

that supports if the USB cable or USB memory stick does not fit

into your TV’s USB port.

IR Blaster

Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player,

soundbar, game consoles, etc., using the IR Blaster. (Depending on country)

Note

•Connect the IR Blaster cable to the TV’s IR Blaster port.

•Use universal control settings to control the device.

•Secure the IR Blaster with the 3M tape provided.

External Devices

Available external devices are: Blu-ray player, HD receivers, DVD players, VCRs,

audio systems, USB storage devices, PC, gaming devices, and other external

devices.

Note

•The external device connection may differ from the model.

•In PC mode, there may be noise associated with the resolution, vertical

pattern, contrast or brightness. If noise is present, change the PC output

to another resolution, change the refresh rate to another rate or adjust

the brightness and contrast on the [Picture] menu until the picture is

clear.

•In PC mode, some resolution settings may not work properly depending

on the graphics card.

•If Ultra HD content is played on your PC, video or audio may become

disrupted intermittently depending on your PC’s performance.

(Depending on model)

•When connecting to a wired LAN, use a CAT 7 cable with high-speed

Internet transmission. (Only when port is provided.)

Specications

(Depending on country)

Broadcasting Specifications

Digital TV Analogue TV

Television system DVB-T/T2, DVB-C, DVB-S/S2

PAL B/B, PAL B/G, PAL

D/K, PAL-I,

SECAM B/G, SECAM D/K,

NTSC-M

Programme coverage

DVB-S/S2 DVB-C DVB-T/T2

46 ~ 862 MHz

950 ~ 2,150 MHz 46 ~ 890 MHz

VHF III : 174 ~ 230 MHz

UHF IV : 470 ~ 606 MHz

UHF V : 606 ~ 862 MHz

S Band II : 230 ~ 300 MHz

S Band III : 300 ~ 470 MHz

Maximum number of

storable programmes 6,000 3,000

External antenna

impedance 75Ω

CI Module (W x H x D) 100.0mm x 55.0mm x 5.0mm

•Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced

8K images will vary depending on the source content. (Depending on model)

Environment condition

Operating Temperature 0°C to 40°C

Operating Humidity Less than 80%

Storage Temperature -20°C to 60°C

Storage Humidity Less than 85%

•For information of the power supply and power consumption, refer to the label attached to the product.

-The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.

* On some models, the label is inside the external device connection terminal cover.

* Depending on the model or country, the typical power consumption may not be on label.

Product Information

Wireless module(LGSBWAX12)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac/ax)

Frequency range Output Power (Max.)

2,400 to 2,483.5MHz 17dBm

5,150 to 5,725MHz 15dBm

5,725 to 5,850MHz 13dBm

5,945 to 6,425MHz (Only UK, EU) 11dBm

Bluetooth

Frequency range Output Power (Max.)

2,400 to 2,483.5MHz 9dBm

As band channels can vary per country, the user cannot change or adjust

the operating frequency. This product is configured for the regional

frequency table.

For consideration of the user, this device should be installed and operated

with a minimum distance of 20cm between the device and the body.

Open Source Software Notice

Information

To obtain the source code that is contained in this product, under GPL, LGPL,

MPL, and other open source licenses that have the obligation to disclose

source code, and to access all referred license terms, copyright notices and

other relevant documents please visit https://opensource.lge.com.

LG Electronics will also provide open source code to you on CD-ROM for a

charge covering the cost of performing such distribution (such as the cost of

media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid to anyone in receipt of this information for a period of three

yearsafter our last shipment of this product.

Licenses

(Magic Remote supported models only)

Troubleshooting

Cannot control the TV with

the remote control.

•Check the remote control sensor on the product and try again.

•Check if there is any obstacle between the product and the remote control.

•Check if the batteries are still working and properly installed ( to , to ).

No image display and no

sound is produced.

•Check if the product is turned on.

•Check if the power cord is connected to a wall outlet.

•Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly. •Check the power control settings. The power supply may be interrupted.

•Check if the auto-off function is activated on the settings related time.

•If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

When connecting to the

PC (HDMI), no signal is

detected.

•Turn the TV off/on using the remote control.

•Reconnect the HDMI cable.

•Restart the PC with the TV on.

Abnormal Display •If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is

nothing wrong with product.

•This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly

coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not

affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is

not subject to exchange or refund.

•You may find different brightness and colour of the panel depending on your viewing position(left/right/top/

down).

This phenomenon occurs due to the characteristic of the panel.

It is not related with the product performance, and it is not malfunction.

•Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on

the TV screen for a long period of time.

Generated Sound •“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal

contraction due to temperature and humidity. This noise is common for products where thermal deformation is

required.

•Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which

supplies a large amount of current to operate a product. It varies depending on the product. This generated sound

does not affect the performance and reliability of the product.

The TV does not turn on

continuously due to Always

Ready mode operation or

does not automatically

turn on by sensor.

•The motion sensor is located on the bottom centre of the TV.

•The motion sensor is only supported by some models.

•If there is a foreign substance on the motion sensor, it may not work properly.

•If the environment around the TV is too bright or too dark, the motion sensor may not work properly.

•Obstacles in front of the TV may affect the detection function of the motion sensor.

•It can operate by recognising changes in lighting around the TV or movement of objects (pets/robot vacuum

cleaners, etc.).

•To stop using the Always Ready mode in → → [All Settings] → [General] → [Always Ready] →

[Enable the function], or to use only the General Always Ready mode function, you can select Enable Always

Ready mode, turn off the screen, and then stop using the motion sensor in [Always Ready Settings]. The screen-on

function with the motion sensor can be set by adjusting the performance of the sensor through the [Always Ready

Settings] → [Motion Sensor Sensitivity] setting.

•Make sure to wring any excess water or cleaner from the cloth.

•Do not spray water or cleaner directly onto the TV screen.

•Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

Precautions for Protecting the OLED TV Screen

Unlike regular LED/LCDs, OLED TVs produce images that emit light for each

pixel, achieving a perfect black colour and delivering clear images without

blurring.

Due to the nature of the organic materials used to achieve high-resolution

image quality, OLED displays generally experience image retention on the

screen, which can be a persistent phenomenon. This phenomenon is observed

in all OLED panels, and although recommended picture modes can minimise

image retention, current technology cannot completely prevent this from

occurring.

Displaying the same image for a long time or repeatedly displaying the

same image can cause image retention on the screen, which is a common

phenomenon in OLED panel products due to the nature of the product. This

product has a built-in screen protection feature. Avoid displaying images that

are likely to cause image retention, and follow the recommendations.

Images that are likely to cause image

retention

•Images with black areas on the top and bottom and/or the left and right

sides of the screen.

•Images whose aspect ratio is 4:3 or 21:9.

•Images that are fixed for a long time, such as program number, station

logo, game console icon, set-top box menu, etc.

•Other fixed screen images or repeatedly displayed images.

Running [Pixel Cleaning] to Protect the

OLED TV Screen

The OLED TV is equipped with a pixel cleaning feature to check the status of

the screen by itself and prevent image retention that leaves an image on a

screen. This feature automatically calculates the optimal execution time based

on the accumulated viewing time and is automatically executed when the

TV is turned off. While this feature is running, horizontal lines may appear at

the top and bottom of the screen. The pixel cleaning feature works when the

product is connected to the power cord and main power.

•To run this function manually, press the button on the remote

control, go to → [General] → [OLED Care] → [OLED Panel Care]

and press [Pixel Cleaning].

Recommendations for Minimising

Image Retention

When watching the TV for a long time, press the button on the remote

control, go to → [Picture] → [Select Mode] and set the mode to [Eco],

go to [Advanced Settings] → [Brightness] and set [OLED Pixel Brightness] to

a lower level. In addition, press the button on the remote control, go to

→ [General] → [OLED Care] → [OLED Panel Care] and set the [Adjust

Logo Brightness] value to [High].

When showing images with black bars at the top/bottom/left/right side of

the screen, press the button on the remote control, press , and go to

[Picture] → [Aspect Ratio] → [User Selection] → [Vertical Zoom] or [4-Way

Zoom] to remove the black bars.

Turn off the menus for setting up devices such as set-top boxes so that they

are not displayed on the screen for a long time.

Note

•When the screen is showing one fixed image for a long time, the screen

brightness will be automatically reduced and then restored once the

screen content changes. This is a normal function to minimise image

retention.

Using Magic Remote Control

Note

To use the button, press and hold for more than 1 second.

•Depending on the screen height, some buttons may not work. (Depending on model)

•While changing the screen height, only limited buttons will work. (Power, Volume) (Depending on model)

•You cannot use the pointer in Line View. (Depending on model)

Number buttons Enters numbers.

Accesses the [Quick Help].

Accesses the [Edit Quick Access].

-[Edit Quick Access] is a feature that allows you

to enter a specified app or Live TV directly by

pressing and holding the number buttons.

Accesses the [Guide].

Accesses the saved programmes list.

More Actions Displays more remote control

functions.

More Actions Audio descriptions function will

be enabled.

Home Accesses the Home menu.

Home Launches the last used apps.

Input Changes the input source.

Input Accesses the [Home Dashboard].

up/down/left/right Press the up, down, left

or right button to scroll the menu. If you press

the up, down, left or right button while the

pointer is in use, the pointer will disappear from

the screen and Magic Remote will operate like

a general remote control. To display the pointer

on the screen again, shake Magic Remote to the

left and right.

Wheel (OK) Press the centre of button to

select a menu. You can change programmes by

using button.

-Do not move the wheel on the remote control

right or left. This may cause the malfunction

of the product.

Wheel (OK) Accesses the [Magic Explorer]. You

can run the [Magic Explorer] feature when the

pointer colour is changed to purple. If watching

a programme, press and hold down the

pointer onto the video. When using [TV Guide],

[Settings], [Sports Alert], or [Art Gallery], press

and hold down on the text.

Power Turns the TV on or off.

STB Power You can turn your set-top box on

or off by adding the set-top box to the universal

remote control for your TV.

1 Accesses the saved programmes list.

1 Up-Down You can raise or lower the screen to

switch between Line View and Full View.

1 Up-Down In Full View, you can lower the screen

all the way down to Zero View and only hear

the sound.

Volume buttons Adjusts the volume level.

Mute Mutes all sounds.

Mute Accesses the [Accessibility] menu.

Programme buttons Scrolls through the

saved programmes.

Voice recognition Network connection is

required to use the voice recognition function.

Check for recommended content. (Some

recommended services may not be available in

some countries.)

Voice recognition Speak while pressing and

holding the button to use the voice recognition

feature.

To achieve accurate recognition of your speech,

you must pronounce words in a slow and accurate

manner at an appropriate voice volume at a

distance of about 10cm away from the Magic

Remote’s microphone( ).

Back Returns to the previous level.

Back Clears on-screen displays and returns to

last input viewing.

Q. Settings Accesses the Quick Settings.

Q. Settings Displays the [All Settings] menu.

These access special functions in some menus.

Red button Runs the record function.

2Streaming Service buttons Connects to the

Video Streaming Service.

Microphone

The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly.

(Some buttons and services may not be provided depending on models or

regions.)

How to register the Magic Remote

Control

To use the Magic Remote, first pair it with your TV.

1 Put batteries into the Magic Remote and turn the TV on.

2 Point the Magic Remote at your TV and press the Wheel (OK) on the

remote control.

* If the TV fails to register the Magic Remote, try again after turning the TV

off and back on.

How to deregister the Magic Remote

Control

Press the (Back) and (Home) buttons at the same time, for five

seconds, to unpair the Magic Remote with your TV.

* Press and hold the (Home) and (Q. Settings) buttons for more

than 5 seconds to disconnect and re-register the Magic Remote at the

same time.

•It is recommended that an Access Point (AP) be located more than

0.2m away from the TV. If the AP is installed closer than 0.2m, the

Magic remote control may not perform as expected due to frequency

interference.

Using Always Ready

(Depending on model)

You can operate the TV and connect to Bluetooth with direct voice recognition

while the power is off.

* → → [General] → [Always Ready], setting [Enable the

function] to on.

* Pressing the button while watching TV switches the screen to [Always

Ready] that is turned on, and pressing the button once more turns the

screen to [Always Ready] that is turned off.

* Press the (Home) button or the (Back) button to watch TV when

the screen is in [Always Ready] that is turned on.

* Press the Wheel (OK) button to display the wallpaper when the screen

is in [Always Ready] that is turned off, and press the button to watch

TV.

Note

•Using Always Ready may increase energy consumption.

•For more information about the feature, refer to the → →

[Support] → [User Guide] → [Troubleshooting] → [Learn More About

Always Ready].

Connecting Smart Devices using NFC

Tagging

NFC is technology that uses Near Field Communication (13.56MHz), allowing

you to conveniently send and receive information without separate settings.

By bringing a smart device near the NFC-enabled remote control, you can

install the LG ThinQ app and connect the device to the TV.

1 Turn on NFC in the smart device’s settings. To use NFC with Android

devices, set the NFC option to enable ‘read/write tags’ in the smart

device's settings. The NFC settings may vary depending on the device.

2 Bring the smart device near the (NFC) on the remote control. The

required distance for NFC tagging is about 1cm.

3 Follow the instructions to install the LG ThinQ app on your smart device.

4 Retagging the smart device to the remote control allows you to

conveniently access various features on the connected TV through the LG

ThinQ app.

Note

•This feature is available for NFC-enabled smart devices only.

•This feature is only available if the remote control has an NFC logo.

Specifications

Specifications (PM22GN)

Frequency range Output Power (Max.)

Bluetooth 2,400 to 2,483.5MHz 8dBm

NFC 13.553 to 13.567MHz -9.95 dBuA/m @ 10 m

Using Magic Remote Control

Power Turns the TV on or off.

Accesses the [Guide].

Accesses the saved programmes list.

Accesses the [Edit Quick Access].

-[Edit Quick Access] is a feature that allows

you to enter a specified app or Live TV

directly by pressing and holding the

number buttons.

Volume buttons Adjusts the volume level.

Home Accesses the Home menu.

Home Launches the last used apps.

Wheel (OK) Press the centre of button to

select a menu. You can change programmes

by using button.

Wheel (OK) Accesses the [Magic Explorer].

You can run the [Magic Explorer] feature

when the pointer colour is changed to purple.

If watching a programme, press and hold

down the pointer onto the video. When using

[TV Guide], [Settings], [Sports Alert], or [Art

Gallery], press and hold down on the text.

Up/Down/Left/Right Press the up, down,

left or right button to scroll the menu. If you

press buttons while the pointer is in use,

the pointer will disappear from the screen

and Magic Remote will operate like a general

remote control. To display the pointer on the

screen again, shake Magic Remote to the left

and right.

Back Returns to the previous level.

Back Clears on-screen displays and returns to

last input viewing.

1 1

Microphone Number buttons Enters numbers.

Accesses the [Quick Help].

More actions Displays more remote

control functions.

Audio descriptions function will be enabled.

Programme buttons Scrolls through the

saved programmes.

Mute Mutes all sounds.

Mute Accesses the [Accessibility] menu.

Voice recognition Network connection

is required to use the voice recognition

function.

Check for recommended content. (Some

recommended services may not be available

in some countries.)

Voice recognition Speak while pressing

and holding the button to use the voice

recognition feature.

Input Changes the input source.

Input Accesses the [Home Dashboard].

Q. Settings Accesses the Quick Settings.

Q. Settings Displays the [All Settings]

menu.

These access special functions in some

menus.

Red button Runs the record function.

1Streaming Service buttons Connects to

the Video Streaming Service.

Note To use the button, press and hold for more than 1 second.

The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly.

(Some buttons and services may not be provided depending on models or

regions.)

How to register the Magic Remote

Control

To use the Magic Remote, first pair it with your TV.

1 Put batteries into the Magic Remote and turn the TV on.

2 Point the Magic Remote at your TV and press the Wheel (OK) on the

remote control.

* If the TV fails to register the Magic Remote, try again after turning the TV

off and back on.

How to deregister the Magic Remote

Control

Press the (Back) and (Home) buttons at the same time, for five

seconds, to unpair the Magic Remote with your TV.

* Press and hold the (Home) and (Q. Settings) buttons for more

than 5 seconds to disconnect and re-register the Magic Remote at the

same time.

•It is recommended that an Access Point (AP) be located more than

0.2m away from the TV. If the AP is installed closer than 0.2m, the

Magic remote control may not perform as expected due to frequency

interference.

Using Always Ready

(Depending on model)

You can operate the TV and connect to Bluetooth with direct voice recognition

while the power is off.

* → → [General] → [Always Ready], setting [Enable the

function] to on.

* Pressing the button while watching TV switches the screen to [Always

Ready] that is turned on, and pressing the button once more turns the

screen to [Always Ready] that is turned off.

* Press the (Home) button or the (Back) button to watch TV when

the screen is in [Always Ready] that is turned on.

* Press the Wheel (OK) button to display the wallpaper when the

screen is in [Always Ready] that is turned off, and press the button to

watch TV.

Note

•Using Always Ready may increase energy consumption.

•For models with motion sensors, such as G2, if you set screen on with the

motion sensor, the TV will turn on by recognising the motion.

•For more information about the feature, refer to the → →

[Support] → [User Guide] → [Troubleshooting] → [Learn More About

Always Ready].

Connecting Smart Devices using NFC

Tagging

NFC is technology that uses Near Field Communication (13.56MHz), allowing

you to conveniently send and receive information without separate settings.

By bringing a smart device near the NFC-enabled remote control, you can

install the LG ThinQ app and connect the device to the TV.

1 Turn on NFC in the smart device’s settings. To use NFC with Android

devices, set the NFC option to enable ‘read/write tags’ in the smart

device's settings. The NFC settings may vary depending on the device.

2 Bring the smart device near the (NFC) on the remote control. The

required distance for NFC tagging is about 1cm.

3 Follow the instructions to install the LG ThinQ app on your smart device.

4 Retagging the smart device to the remote control allows you to

conveniently access various features on the connected TV through the LG

ThinQ app.

Note

•This feature is available for NFC-enabled smart devices only.

•This feature is only available if the remote control has an NFC logo.

Specifications

Specifications (MR22GN, MR22GA)

Frequency range Output Power (Max.)

Bluetooth 2,400 to 2,483.5MHz 7dBm

NFC*13.553 to 13.567MHz -13.27dBuA/m @ 10m

* Only MR22GN