Table of Contents
LG PH1R User Manual
Displayed below is the user manual for PH1R by LG which is a product in the Portable Speakers category. This manual has pages.
Related Manuals
Please read this manual carefully before operating
your set and retain it for future reference.
MODELS
PH1 PH1L PH1R
*MFL69383501* www.lg.com
OWNER’S MANUAL
Portable
Bluetooth Speaker
1 Getting Started
Getting Started 3
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. The Power Plug is the disconnecting
device. In case of an emergency, the Power Plug must
remain readily accessible.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
CAUTION when using this product in environments
of low humidity
yIt may cause static electricity in environments of
low humidity.
yIt is recommended to use this product after
touching any metal object which conducts
electricity.
Getting Started4
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, re or
the like.
Do not remove battery incorporated with product for
your safety. If you need to replace the battery, take it
to the nearest authorized LG Electronics service point
or dealer for assistance.
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents 5
1
2
3
4
1 Getting Started
3 Safety Information
6 Introduction
6 Accessories
7 Main Unit
8 Charging the Unit
8 – Connecting the AC adapter
8 – Checking Battery status
8 – Checking the charging status
2 Operating
9 Basic Operations
9 – Using power button
9 – Bluetooth Connection
9 – Simple Operation Guide
10 – Bluetooth LED (BLUE) status
10 Handsfree Function
11 Mood LED light
12 Listening to Music from Your External Device
12 Using BLUETOOTH® technology
13 – Listening to music stored on the
BLUETOOTH devices
14 Other Operation
14 – Resetting
14 – Notice for Auto Power Off
3 Troubleshooting
15 Troubleshooting
4 Appendix
16 Trademarks and Licenses
16 Handling the Unit
17 Specifications
Table of Contents
Getting Started6
Getting Started
1
Introduction
Symbol used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Accessories
Please check and identify the supplied accessories.
USB cable (1) Simple Manual (1)
Getting Started 7
Getting Started
1
Main Unit
a hb i
c f jd g ke
a MIC
b BLUETOOTH LED
c
Receives or redials on the Bluetooth device.
(Refer to the page 10.)
d
T
Starts or pauses playback on the Bluetooth
mode.
e
Turns On / Off : Press and hold it.
f p : Turn down the volume.
g o : Turn up the volume.
h
Battery LED
i
Turns on mood LED light. (Refer to the page 11.)
j
Portable In connector
Listens to music from your portable device.
k
USB port for charging
Getting Started8
Getting Started
1
Charging the Unit
Connecting the AC adapter
This device uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to USB port of of the unit.
3. Plug the AC adapter into an AC outlet.
(Not supplied)
If the battery is fully charged in charging mode,
LED (RED) is turned off.
AC adapter is not supplied.
It is recommended that you use the 5 V AC
adapter approved by LG Electronics Inc. (more
than 1.8 A) with this speaker because of danger
of explosion. If you do not use the recommended
adapter, charging is unavailable or charging time
may differ.
> Caution
Checking Battery status
When AC Adapter is connected, battery charging is
started. You can check the charging status by LED
(RED).
LED Condition Description
Battery LED turns
off.
Battery is full
charged.
Battery LED
blinks with the
sound.
Battery is low.
(Power on)
Battery LED turns
on.
Battery is
charging.
yOperating time is approx. 5 hours. (Based
on fully charged the battery and continuous
playback using 50 % volume level.)
It may vary depending on the battery status
and operational conditions.
yIf you listening the music while charging,
it will take longer to charge.
, Note
Checking the charging status
If the power turned on, you can check the charging
status by pressing
1/!
button. Then Mood LED
light will blink depending on battery charging status.
Mood LED light
blinking
Battery
Status
3 times
60 %
60~25 %
25 %
twice
60 %
60~25 %
25 %
once
60 %
60~25 %
25 %
When Mood LED light turn off, you can check
battery charging status.
, Note
2 Operating
Operating 9
Operating
2
Basic Operations
Using power button
Power On / Off
Press and hold the
button for more than
2 seconds.
Bluetooth Connection
PH1(XX)
Play the desired music on the Bluetooth device. After
pairing, you can control playback using the buttons
on the front of the unit.
Simple Operation Guide
Function How to Status
Power On Press and hold the button. j LED blinks with the sound.
Power Off Press and hold the button. j LED turns off with the sound.
Bluetooth pairing
When j LED blinks with the sound.,
select LG PH1 (XX) from device list on
your smart device.
j LED turns on with the sound.
Play / Pause Press T. -
Forward skip Press T twice. -
Backward skip Press T three times. -
Volume control Press p or o
When this unit reaches minimum
volume or maximum volume, you can
hear beep sound.
Operating10
Operating
2
Bluetooth LED (BLUE) status
LED Condition Description
j LED blinks with
the sound.
Searching for
Bluetooth device.
j LED turns on
with the sound.
Bluetooth device
is connected.
yOnce pairing is performed, it does not need to
be done again even if you turn off this unit.
yTo disconnect the Bluetooth device, press
and hold T on the front of the unit for
3 seconds. The unit is disconnected.
, Note
Handsfree Function
You can receive incoming call and redial the last call
on your Bluetooth device to this speaker. Connect
the speaker to a Bluetooth device.
Function How to
Receive a call. Press .
Redial the last sending call. Press twice.
Reject a call. Press for
2 seconds.
End the call.Press .
You can adjust the call volume.
, Note
Operating 11
Operating
2
Mood LED light
You can turn on mood LED light on this speaker.
When you press button, the mood LED light settings will be appeared in the order as below.
Function How to Status
Turns on Press and hold the button. Turns on mood LED light.
Turns off Press and hold the button. Turns off mood LED light.
Various colors Press . Changes automatically mood LED light
color. (WhiteàGreenàRed)
White color Press . Turns on mood LED light. (White)
Music-synchronized Press .
Synchronizes mood LED light to music.
Music-synchronized option is available
only when the speaker is on.
Even though speaker is off, you can adjust mood LED light.
, Note
Operating12
Operating
2
Listening to Music from
Your External Device
The unit can be used to listen to the music from
many types of external device.
(Not supplied)
1. Connect the external device to the Portable In
connector of the unit.
2. Turn the power on by pressing and holding
button.
3. Turn the external device on and start playing.
When you connect the portable cable, the
function is changed to portable in mode
automatically.
, Note
Using BLUETOOTH®
technology
About BLUETOOTH
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
yAvailable Devices : Smart phone, MP3 player, etc.
yVersion : 3.0
yCodec : SBC
BLUETOOTH Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Prole)
Operating 13
Operating
2
Listening to music stored on the
BLUETOOTH devices
Pairing your unit and BLUETOOTH
device
Before you start the pairing procedure, make sure the
Bluetooth feature is turned on in to your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
1. Turn on the unit then j LED blinks with the
sound.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG PH1 (xx)”.
3. Select “LG PH1 (xx)”.
yXX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG PH1
(08)” on your Bluetooth device.
yDepending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
, Note
4. When this unit is successfully connected with
your Bluetooth device, j LED will turn on with
the sound.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
yWhen using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However you may experience issues in the
cases below :
- There is an obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yYou should connect your Bluetooth device to
this unit again when you restart it.
yThe sound may be interrupted when the
connection interfered by the other electronic
wave.
yYou may not control the Bluetooth device
with this unit.
yPairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yDepending on the type of the device, you may
not be able to use the Bluetooth function.
yYou can enjoy Bluetooth function using
Smart phone, MP3 player, etc..
yThe more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
yBluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets too far from the unit.
yWhen Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yWhen you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
yWhen the unit is not connected, Bluetooth
LED will blink.
yBluetooth connection using the TV, PC or
dongle is not supported.
, Note
Operating14
Operating
2
Other Operation
Resetting
In case that the unit freezes due to malfunction,
press T and o buttons at the same time.
Then the unit is turned off completely.
Notice for Auto Power Off
When the unit is in Bluetooth mode without music
playback for 20 minutes or in portable input mode
without button operation for 6 hours, this unit is
turned off automatically.
3 Troubleshooting
Troubleshooting 15
Troubleshooting
3
Troubleshooting
Problem Cause & Correction
No Power.
yThe battery is discharged. Recharge the battery.
yConnect the unit to the power supply with the AC adapter.
No sound or sound
distortion.
yThe unit or your smart device’s volume is set to minimum. Check and adjust the
volume of the unit or Bluetooth device’s volume.
yWhen you use an external device at high volume, the sound quality may be
deteriorated. Lower the volume of the devices.
yIf you use the unit for purposes other than listening to music, the sound quality
may be lowered or the unit may not work properly.
Bluetooth pairing does
not work well.
ySwitch Bluetooth off and on again on your Bluetooth device, then try pairing
again.
yBe sure your Bluetooth device is on.
yRemove the obstacle in the path of the Bluetooth device and the unit.
yDepending on the type of the Bluetooth device or surrounding environment,
your device may not be paired with the unit.
The unit does not
operate normally.
yIf the battery was fully discharged, the stored Bluetooth information can be
deleted. Previous setting may not be saved when the unit’s power is shut off.
yIn case of malfunction, please use the unit in proper place where the
temperature or humidity is not so high or low.
4 Appendix
Appendix16
Appendix
4
Trademarks and
Licenses
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
yDo not use volatile liquids such as insecticide spray
near the unit.
yWiping with strong pressure may damage the
surface.
yDo not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Appendix 17
Appendix
4
Specifications
General
Power requirements 5 V 0 1.8 A (AC adapter)
Built-in rechargeable battery
Power consumption 2.5 W
Dimensions (W x H x D) Approx. 81 mm X 88mm X 82 mm
Net Weight Approx. 0.19 kg
Operating temperature 0 °C to 35 °C
Operating humidity 5 % to 60 %
Inputs
PORT. IN 0.25 Vrms (3.5 mm stereo jack)
USB Micro USB port for charging battery
Speaker
Type Built-in
Impedance Rated 4 Ω
Rated Input Power 2 W
Max Input Power 4 W
Battery
Battery capacity 700 mAh
Operating time Approx. 5 hours.
It may vary depending on the battery status and operational conditions.
Charging time
Less than 3 hours.
The operating time can be varied depending on the conditions of the battery
or operation.
yDesign and specications are subject to change without notice.
