LG SJ8 User Manual
Displayed below is the user manual for SJ8 by LG which is a product in the Soundbar Speakers category. This manual has pages.
Related Manuals
SIMPLE MANUAL
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com and then download
Owner’s Manual. Some of the content in this manual may differ from your unit.
MODEL
SJ8
www.lg.com
*MFL69727364*
SJ8
SMART Hi-Fi
AUDIO
Wireless Multi-room Sound Bar
ENGLISH
WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
FCC Compliance Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and
the receiver.
yConnect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired
operation of the device. Any changes or modications
in construction of this device which are not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement : This equipment
complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specic
operating instructions for satisfying RF exposure
compliance.
FCC Radio Frequency Interference Requirements :
High power radars are allocated as primary users of the
5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and/or damage
this device. This device cannot be co-located with any
other transmitter.
Responsible Party :
LG Electronics USA, Inc.
1000 Sylvan Ave
Englewood Cliffs, NJ 07632
Tel: 1-800-243-0000
Front Panel
Rear Panel
DC IN ·····················Connect to AC Adapter.
USB (Service only) ······S/W download connector.
LAN·····························Connect to router.
OPTICAL IN ···········Connect to an optical device
HDMI IN ········Connect to device with HDMI OUT.
HDMI OUT (TV ARC) ············· Connect to a TV.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
b Turn on the sound bar. :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's green
LED turns on.
Manually Subwoofer Connection
If the subwoofer does not make sound, try to connect
manually.
a Press Pairing button on the rear of the wireless
subwoofer.
• The green LED on the rear of wireless
subwoofer blinks quickly.
b Turn on the sound bar.
c Pairing is completed.
• The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 (3.3 ft) m to prevent wireless
interference.
> 1 m
(3.3 ft)
The buttons are located on the rear.
LED indicator
1 ·······································Standby
F ································Selects function
-/+ ·······························Adjusts volume
····················Connects wireless network.
···· Adds the additional Music Flow product to
your network. (In case that one or more Music Flow
product is connected.)
LED indicator: Shows connection status.
• White (Blinking): Waiting for network connection
• White (Staying on): Network connection is
completed.
• White (Dimmed): Standby mode with network
connection.
• Green (Staying on): The rst group was set.
• Red (Staying on): Standby mode without network
connection.
LAN
a
b
c
d
a Check network condition. A router connected to
network should be installed.
b Connect your smart device to your home network.
c Connect the sound bar to the power supply.
d Connect the media server to your home network in
order to enjoy music.
All devices should be connected to same router.
• Download LG Music Flow Application
Download “Music Flow Player” on the App Store or
Google Play Store.
• Launch Music Flow Player App
Follow the steps for wired or wireless connection
displayed on the screen.
Network ConnectionTV Connection
Connect the sound bar and TV using Optical ( ) or
HDMI ARC ( ).
Optical Connection
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on your
TV setting menu.
TV
HDMI(ARC) Connection
a Connect the sound bar to the TV using HDMI
cable.
b Set up [External Speaker (HDMI ARC)] on
your TV setting menu.
TV
• HDMI connection is unavailable if your TV
does not support HDMI ARC.
• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal is a
high priority.
Additional Device Connection
a Connect to the external device like as follow.
(Set-top Box,
Player etc.)
OR
b Set the input source by pressing F on the
remote control or unit repeatedly.
Remote control
Replacing the batteries
SOUND EFFECT: Selects a sound effect mode.
F: Selects the function and the input source.
8: Turns down the volume at night.
:
Adjusts sound level of Treble, Bass and Sub-woofer.
INFO:
Displays the input source information.
AV SYNC: Synchronizes the audio and video.
SLEEP: Sets the system to turn off automatically at a specied
time.
AUTO VOL:
Adjusts too loud or low output volume level
appropriately.
AUTO POWER: Automatically turns on by an input source.
Additional Information
Specication
Power
consumption Refer to the main label.
AC adapter
yModel : DA-38A25
yManufacturer : Asian Power Devices Inc.
yInput : 100 - 240 V ~ 50 - 60 Hz
yOutput : 25 V 0 1.52 A
Dimensions
(W x H x D)
Approx. 1220 mm x 38 mm x 105 mm
(48.0 inch x 1.5 inch x 4.1 inch)
Amplier
(Total RMS
Output power)
300 W RMS
Design and specications are subject to change without notice.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-
ROM for a charge covering the cost of performing such distribution
(such as the cost of media, shipping and handling) upon email
request to opensource@lge.com. This offer is valid for three (3)
years from the date on which you purchased the product.
LG Customer Information Center
1-800-243-0000 USA, Consumer
1-888-865-3026 USA, Commercial
Register your product Online!
www.lg.com
Printed in China