LG SP122CA User Manual
Displayed below is the user manual for SP122CA by LG which is a product in the Split-System Air Conditioners category. This manual has pages.
Related Manuals
MODELS
SP121CA NL0 SP121CA US0
SP122CA NL0 SP122CA US0
WALL MOUNTED
www.lg.com
Please read this manual carefully before operating
your set and retain it for future reference.
OWNER’S MANUAL
AIR
CONDITIONER
ENGLISH ESPAÑOL
2TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
This appliance is not intended for use by persons (including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience and knowledge, unless they have been given su-
pervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
WARNING: Before accessing the terminals, all power circuits must be disconnected.
WARNING: Fixed installations will incorporate disconnect means in accordance with installation
rules.
WARNING: The appliance must be installed in accordance with national regulations for electrical
installations.
• Do not cool excessively indoors. This may be harmful for your health and may consume
more electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air con-
ditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may
block the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
WARNING
It can result in serious injury or death when the directions are ignored
CAUTION
It can result in minor injury or product damage when the directions are ignored
WARNING
• Always use a power plug and socket with a ground terminal. There is a risk of electric shock.
• Do not use a defective or underrated circuit breaker. Use the correctly rated breaker and fuse. There
is risk of fire or electric shock .
• Do not use a multi consent. Always use this appliance on a dedicated cicuit and breaker. Otherwise it
can cause electric shock or fire.
• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.
Do not disassemble or repair the product by yourself. There is risk of fire or electric shock.
• Always ground the product as per the wiring diagram. Do not connect the ground wire to gas or water
pipes lightening rod or telephone ground wire. There is risk of fire or electric shock.
• Install the panel and the cover of control box securely. There is risk of fire or electric shock due to
dust , water etc.
• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.
• Do not modify or extend the power cable. If the power cable or cord has scrathes or skin peeled off or
deteriorated then it must be replaced. There is risk of fire or electric shock.
• For installation, removal or reinstall , always contact the dealer or an Authorized Service Center. There
is risk of fire, electric shock, explosion, or injury.
• Do not install the product on a defective installation stand. Be sure that the installation area does not
deteriorate with age. It may cause product to fall.
• Never install the outdoor unit on a moving base or a place from where it can fall down. The falling
outdoor unit can cause damage or injury or even death of a person.
• When the product is soaked (flooded or submerged) in water , contact an Authorized Service Center
for repair before using it again. There is risk of fire or eletric shock.
• In outdoor unit the step-up capacitor supplies high voltage electricity to the electrical components. Be
sure to discharge the capacitor completely before conducting the repair work. An charged capacitor
can cause electrical shock.
• When installing the unit, use the installation kit provided with the product. Otherwise the unit may fall
and cause severe injury.
•
Be sure to use only those parts which are listed in the svc parts list. Never attempt to modify the equip-
ment. The use of inappropriate parts can cause an electrical shock, excessive heat generation or fire.
!
!
!
3
ENGLISH
4IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
• Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly
so that there is no force pulling the cable from the connection terminals. Improper or loose connec-
tions can cause heat generation or fire.
• Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installa-
tion or svc and then tear away and thraw away the plastic packaging bags. Children may play with
them and cause injury.
• Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the
plug completely. Dirty, loose or broken power plug can cause electric shock or fire.
• Be sure to check the refrigerant to the used. Please read the label on the product. Incorrect refrigerant
used can prevent the normal operation of the unit.
• Don't use a power cord, a plug or a loose socket which is damaged. Otherwise it may cause a fire or
electrical shock.
• Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out.
There is risk of electric shock or fire.
• Do not place a heater or other heating appliances near the power cable. There is risk of fire and elec-
tric shock.
• Do not allow water to run into electric parts. Install the unit away from water sources. There is risk of
fire, failure of the product, or electric shock.
•
Do not store or use or even allow flammable gas or combustibles near the product. There is risk of fire.
• Do not use the product in a tightly closed space for a long time. Perform ventilation regularly. Oxygen
deficiency could occur and hence harm your health.
• Do not open the front grille of the product during operation. (Do not touch the electrostatic filter, if
the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.
• If strange sounds, smell or smoke comes from product.Immediately turn the breaker off or disconnect
the power supply cable. There is risk of electric shock or fire.
• Ventilate the product room from time to time when operating it together with a stove, or heating ele-
ment etc. Oxygen deficiency can occur and hence harm your health.
• Turn the main power off and unplug the unit when cleaning or repairing the product. There is risk of
electric shock.
• When the product is not to be used for a long time, disconnect the power supply plug or turn off the
breaker. There is risk of product damage or failure, or unintended operation.
• Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit. This could
result in personal injury and product damage.
• Take care to ensure that power cable could not be pulled out or damaged during operation. There is
risk of fire or electric shock.
• Do not place ANYTHING on the power cable. There is risk of fire or electric shock.
• Do not plug or unplug the power supply plug to turn the unit ON/OFF . There is risk of fire or electric
shock.
• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product
on. Do not use the telephone or turn switches on or off. There is risk of explosion or fire.
• For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent that
causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire, or
electronic shock.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
• Two or more people must lift and transport the product. Avoid personal injury.
• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause cor-
rosion on the product.
• Install the drain hose to ensure that the condensed water is drained away properly. A bad connection
may cause water leakage.
• Keep level even when installing the product. To avoid vibration or noise.
• Do not install the product where the noise or hot air from the outdoor unit could damage or disturb
the neighborhoods. It may cause a problem for your neighbors and hence dispute.
• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant levels
may cause failure of product.
• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-
sumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of property.
• Do not block the inlet or outlet of air flow. It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing water etc. There is risk
of fire, electric shock, or damage to the plastic parts of the product.
•
Do not touch the metal parts of the product when removing the air filter. There is risk of personal injury.
• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and failure
of product.
• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if nec-
essary. A dirty filter reduces the efficiency.
• Do not insert hands or other objects through the air inlet or outlet while the product is operating.
There are sharp and moving parts that could cause personal injury.
• Be cautious when unpacking and installing the product. Sharp edges could cause injury.
• If the refrigerant gas leaks during the repair, do not touch the leakaing refrigerant gas. The refrigernat
gas can cause frostbite (cold burn)
• Do not tilt the unit when removing or uninstalling it. The condensed water inside can spill .
• Do not mix air or gas other than the specified refrigerant used in the system. If air enters the refriger-
ant system, an excessively high pressure results, causing equipment damage or injury.
• If the refrigerant gas leaks during the installation, ventilate the area immediately. Otherwise it can be
harmfull for your health.
• Dismantling the unit, treatment of the refrigerant oil and eventual parts should be done in accordance
with local and national standards. Replace the all batteries in the remote control with new ones of the
same type. Do not mix old and new batteries or different types of batteries. There is risk of fire or
product failure.
• Do not recharge or disassemble the batteries. Do not dispose off batteries in a fire. They may burn or
explode.
• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not
use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other
health hazards.
• Do not let the air conditioner run for a long time when the humidity is very high and a door or a win-
dow is left open. Moisture may condense and wet or damage furniture.
• Do not expose your skin or kids or plants to the cool or hot air draft. This could harm to your health.
• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the
batteries have leaked. The chemicals in batteries could cause burns or other health hazards.
•
Do not drink the water drained from the product. It is not sanitary and could cause serious health issues.
• Use a firm stool or ladder when cleaning, maintaining or repairing the product at an height. Be careful
and avoid personal injury.
!
5
ENGLISH
TABLE OF CONTENTS
2
TIPS FOR SAVING ENERGY
3
IMPORTANT SAFETY IN-
STRUCTIONS
7
ELECTRICAL SAFETY
7Temporary Use of an Adapter
7Temporary Use of an Extension Cord
7Symbols used in this Manual
8
PRODUCT INTRODUCTION
13 Indoor Unit
13 Operation Indication Lamps
13 Outdoor Unit
9
OPERATING
INSTRUCTIONS
9How to insert the Batteries
9Wireless Remote Controller Maintenance
9Operating Method
10 Wireless Remote Controller
11 Operation Mode
12 Auto Mode
12 Cooling Mode
13 Dry Mode
13 Fan Only Operation Mode
14 Timer Mode--Timer On
14 Timer Mode--Timer Off
15 Sleep Mode
16
MAINTENANCE AND
SERVICE
17 Cleaning the Dual Protection Filter
17 Self-Diagnosis Function
18 Troubleshooting Tips! Save time and
money!
19 Specification
TABLE OF CONTENTS
6
ENGLISH
ELECTRICAL SAFETY 7
ENGLISH
!
ELECTRICAL SAFETY
WARNING
• This appliance must be properly grounded. To minimize the risk of electric shock, you must always
plug into a grounded outlet.
• Do not cut or remove the grounding prong from the power plug.
• Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appli-
ance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through
the house wiring.
• If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and
circuit checked by a qualified electrician.
Temporary Use of an Adapter
We strongly discourage the use of an adapter due to potential safety hazards. For temporary con-
nections, use only a genuine adapter, available from most local hardware stores. Ensure that the
large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity con-
nection.
To disconnect the power cord from the adapter, use one hand on each to avoid damaging the
ground terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground
terminal damage.
WARNING
• Never use the appliance with a broken adapter.
Temporary Use of an Extension Cord
We strongly discourage the use of an extension cord due to potential safety hazards.
WARNING
• This appliance should be installed in accordance with national wiring regulations.
This guide acts as a guide to help to explain product features.
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the air conditioner.
This symbol indicates special notes.
!
!
!
!
8PRODUCT INTRODUCTION
ENGLISH
Air Intake Vents
Drain Hose
Base plate
Refrigerant pipes
Connecting
Wires
Air Outlet Vents
Grille tab
Front grille
Air inlet
Signal
receiver
Louvers
(Vertical blades)
Air outlet
Air filter
Flap
(Horizontal blade)
Outdoor Unit
Operation Indication Lamps
POWER : Light up while it is plugged in.
SLEEP : Light up during sleep mode auto operation.
TIMER : Light up during timer operation.
RUN : Light up during the system operation.
Indoor Unit
Standard split Type
Display panel LED indicators
PRODUCT INTRODUCTION
Here is a brief introduction of the indoor and outdoor units. Plase see the information specific to
your indoor unit type.
OPERATING INSTRUCTIONS 9
ENGLISH
How to insert the Batteries
Remove the battery cover by pulling it accord-
ing to the arrow direction. Insert new batteries
making sure that the (+) and (-) of battery are
installed correctly. Reattach the cover byt slid-
ing it back into position.
Use 2 AAA (1,5 Vcc) batteries. Do not
rechargeable batteries.
Replace the old batteries with new ones of
the same type when the display is no longer
legible. The remote control batteries must be
disposed of in accordance with the applicable
laws in force in the country of use.
Wireless Remote Controller
Maintenance
1Choose a suitable place where its safe &
easy to reach.
2Fix the holder to wall etc with the supplied
screws firmly.
3Slide the remote controller inside the
holder.
Operating Method
1The signal receiver is inside the unit.
2Aim the remote controller towards the unit
to operate it.
There should not be any blockage in be-
tween.
NOTE
!
• Remote controller should never be ex-
posed to direct sunlight.
• Signal transmitter & receiver should al-
ways be clean for proper communica-
tion. Use a soft cloth to clean them.
• In case some other appliances also get
operated with remote control, change
their
OPERATING INSTRUCTIONS
10 OPERATING INSTRUCTIONS
ENGLISH
Wireless Remote Controller
The controls will look like the following.
No. Button Function
1 On/Off Used to turn off/on the unit.
2 SWING Used to set the desired ver-
tical airflow direction.
3 FAN
Used to select fan speed in
four steps low, middle, high
and auto wind.
4 SLEEP Used to set sleep mode
auto operation.
5 TIMER Used to set and to cancel
the timer operation.
6 MODE Used to select the operation
mode.
7Decrease the temperature
or time by 1 unit.
8Increase the temperature or
time by 1 unit.
Symbols Meaning
AUTO mode indicator
COOLING indicator
Dry indicator
FAN ONLY OPERATION indicator
SIGNAL RECEPTION indicator
TIMER OFF indicator
TIMER ON indicator
AUTO FAN indicator
LOW FAN SPEED indicator
MIDDLE FAN SPEED indicator
HIGH FAN SPEED indicator
SLEEP indicator
FLAP SWING indicator
AUTO mode indicator
COOLING indicator
DRY indicator
FAN ONLY OPERATION indicator
Operation Mode
Signal transmitter
4
5
6
8
3
2
1
7
OPERATING INSTRUCTIONS 11
ENGLISH
Operation Mode
CoolingAuto mode indicstor Dry indicstor Fan only operstion
indicstor
Press the ON/OFF BUTTON to Turn on the unit.
The unit will respond with a beep.
Press the operation mode button. Each time the button is pressed,
the operation mode is shifted in the direction of the arrow.
For cooling operation set the desired indoor
temperature by pressing the ROOM TEMPERATURE
SETTING BUTTONS.
For cooling the temperature can be set
within 18°C~31°C.
Set the fan speed with the remote controller.
You can select the fan speed in four steps :
low, middle, high and auto wind by pressing the FAN BUTTON.
Each time the button is pressed, the fan speed mode is shifted
in the direction of the arrow.
1
2
3
4
To raise
the temperature
To lower
thetemperature
12 OPERATING INSTRUCTIONS
ENGLISH
Cooling Mode
To activate the AUTO (automatic) mode of op-
eration, press the Mode button on the remote
control until the symbol appears in the display.
In the AUTO mode the fan speed and the
temperature are set automatically according
to the room temperature (tested by the probe
which is incorporated in the indoor unit)to en-
sure user comfort.
The cooling function allows the air conditioner
to cool the room and the room and at the
same time reduces the humidity in the air.
To activate the cooling function(COOL), press
the button until the symbol (COOL)
appears in the display.
The cooling cycle is activated by setting the
keys sor tat a temperature lower than that
of the room.
To optimize the functioning of the conditioner,
adjust the temperature (1), the speed (2) and
the direction of the air flow (3) by pressing the
keys indicated.
Auto Mode
OPERATING INSTRUCTIONS 13
ENGLISH
Fan Only Operation Mode
To set the DRY mode, Press untill
appears in the display. An automatic function
of alternating cooling cycles and air fan is acti-
vated. the setting temperature is not dis-
played on the remote controller and you are
not able to control the room temperature ei-
ther. During the healthy dehumidification func-
tion, the fan speed is automatically set
according to the optimization algorithm re-
sponding to the current room temperature
status, so that the room condition is kept
healthy and comfortable even in the very
humid season.
The conditioner works in only Ventilation. To
set the the Fan Only Operation Mode, Press
MODE until(FAN) appears in the display.
With pressing FAN button the speed changes
in the following sequence :
LOW/MIDDLE/HIGH in FAN mode.
The remote control also stores the speed that
waw set in the previous mode of operation.
Dry Mode
14 OPERATING INSTRUCTIONS
ENGLISH
Timer Mode--Timer Off
To set the automatic switching-on of the air
conditioner. To program the time start, the ap-
pliance should be off. Press TIMER, Set the
temperature with pressing the sor t key.
Press TIMER Again, set the time with press-
ing the sor t key.
Press the key more times till on the display
you can read the time which passes between
the programming and the timed start.
IMPORTANT!
Before proceeding with the timed start : pro-
gram the working mode with the key MODE
and the fan speed with the key FAN .
Switch the conditioner off (with the key
ON/OFF ).
To set the automatic switching-off of the air
conditioner. The timed stop is programmed
with the appliance on. Press TIMER, Set the
time pressing the key or, Press the key more
times till on the display you can read the time
which passes between the programming and
the timed stop. The timer is programmed in
half-hour increments From 0.5 hr to 10 hr and
one-hour increments From 10 hr to 24 hr.
NOTE
!
• To cancel the setted function, press the
TIMER button again.
• In case of power off, it is necessary to
set TIMER OFF again.
• While the time was right settled, the
TIMER function of thus remote(clock
function) can set by half hours.
Timer Mode--Timer On
OPERATING INSTRUCTIONS 15
ENGLISH
SLEEP
To activate the sleep mode of operation,
press the SLEEP button on the remote control
until the symbol appears in the display.
the function "SLEEP" automatically adjusts the
temperature to make the room comfortable
during the night sleep.
In the Cooling and Auto modes,
the temperature increases by 1°C after 60
minutes and by a further 1°C after another
60 minutes for a more comfortable sleep.
The temperature increases with up to 2°C
from the preset temperature.
After 10 hours running is sleep mode the air
conditioner is switched off automatically
Sleep Mode
If the remote control is lost, proceed as fol-
lows: Lift the unit s front panel to reach the
emergency button of the air conditioner if you
press the button once (one beep), the air con-
ditioner will work in forced cooling function.
Emergency Function
Emergency
button
display PCB
front panel
16 MAINTENANCE AND SERVICE
ENGLISH
MAINTENANCE AND SERVICE
Clean the product regularly to maintain optimal performance and to prevent possible breakdown.
* This may not be provided, depending on the model.
Item Cleaning interval Cleaning method
Dual Protection Filter 2 weeks See “Cleaning Dual Protection Filter.”
Indoor unit surface Regularly Use a soft, dry cloth. Do not use bleach or
abrasives.
Outdoor unit Regularly Use steam to clean the heat exchanger coils
and the panel vents (consult with technician).
Dual Protection Filter
CAUTION
• Turn off the power and unplug the power cord before you perform any maintenance; other-
wise it may cause electric shock.
• Never use water that is hotter than 40°C(104°F) when you clean the filters. It may cause
deformation or discoloration.
• Never use volatile substances when you clean the filters. They may damage the surface of
the product.
!
NOTE
!
• The location and shape of the filters may differ, depending on the model.
• Make sure to clean the heat exchanger coils of the outdoor unit regularly, as dirt collected
in the coils may decrease the operational efficiency or increase energy costs.
* The feature can be changed according to type of model.
MAINTENANCE AND SERVICE 17
ENGLISH
Self-Diagnosis Function
In case of error, the display on the indoor unit shown the folloing error codes:
Code RUN lamp Description of the trouble
E1 flashes once The fault of indoor temperature sensor
E2 flashes twice The fault of indoor pipe temperature sensor
E6 flashes 6 times Malfunction of indoor fan motor
Cleaning the Dual Protection Filter
Clean the dual drotection filter once every 2 weeks or more if necessary.
1Turn off the power and unplug the power cord.
2Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according to type of model.
3Hold the knob of the dual protection filter, lift it up slightly and remove it from the unit.
* The feature can be changed according to type of model.
4Clean the filter with a vacuum cleaner or with warm water.
- If dirt is difficult to remove, wash the filter in lukewarm water with detergent.
5Dry the filter in the shade.
18 MAINTENANCE AND SERVICE
ENGLISH
Before requesting service
Please check the following before you contact the service center. If the problem persists, contact
your local service center.
Problem Possible causes Corrective action
There is a burning smell and
a strange sound coming
from the unit.
-Turn off the air conditioner, unplug the
power cord and contact the service center.
Water leaks from the indoor
unit even when the humidity
level is low.
The power cord is damaged
or generating excessive
heat.
A switch, a circuit breaker
(safety, ground) or a fuse is
not operated properly.
The air conditioner does not
work.
The air conditioner is
unplugged.
Check whether the power cord is plugged
into the outlet.
A fuse is blown or the
power supply is
blocked.
Replace the fuse or check if the circuit
breaker has tripped.
Fuse Type : Time Delay, 250 V~, 3.15 A
A power failure has
occurred.
Turn off the air conditioner when a power
failure occurs. When the power is restored,
wait 3 minutes, and then turn on the air
conditioner.
The voltage is too
high or too low. Check if the circuit breaker has tripped.
The air conditioner
turned off automati-
cally at a preset time.
Press the power button again.
Troubleshooting Tips! Save time and money!
MAINTENANCE AND SERVICE 19
ENGLISH
Problem Possible causes Corrective action
The air conditioner does not
generate cool air.
Air is not circulating
properly.
Make sure that there are no curtains,
blinds or furniture blocking the front of the
air conditioner.
The air filter is dirty.
Clean the air filter once every 2 weeks.
See “Cleaning Air Filter” for more infor-
mation.
The room tempera-
ture is too high.
In summer, it may take some time to cool
indoor air. In this case, select the jet cool
operation to cool indoor air quickly.
Cold air is escaping
from the room.
Make sure that no cold air is escaping
through ventilation points in the room.
The desired tempera-
ture is higher than the
set temperature.
Set the desired temperature to a level
lower than the current temperature.
There is a heating
source nearby.
Avoid using a heat generator such as an
electric oven or a gas burner while the air
conditioner is in operation.
Air circulation opera-
tion is selected.
In the air circulation operation, air blows
from the air conditioner without cooling or
heating the indoor air. Switch the opera-
tion mode to the cooling operation.
It is not possible to adjust
the fan speed.
The auto operation,
jet operation or dehu-
midifying operation is
selected.
In some operation modes, such as the jet
or dehumidifying operation modes, you
cannot adjust the fan speed. Select an op-
eration mode in which you can adjust the
fan speed.
It is not possible to adjust
the temperature.
The air circulation op-
eration or jet opera-
tion is selected.
In some operation modes, such as the air
circulation or jet operation mode, you can-
not adjust the temperature. Select an op-
eration mode in which you can adjust the
temperature.
Model
Voltage Frequency
Cooling Heating
Power Current Power Current
SP121CA NL0, US0 115 V~ 60 Hz NOR. 1 125 W/
MAX. 1 687 W
NOR. 9,9 A/
MAX. 12,9 A --
SP122CA NL0, US0 220 V~ 60 Hz NOR. 1 125 W/
MAX. 1 687 W
NOR. 5,2 A/
MAX. 6,8 A - -
Specification
20
ENGLISH
LG ELECTRONICS MEXICO,S.A. DE C.V.
Sor Juana Inés de la Cruz No. 555
Col. San Lorenzo Industrial
Tlalnepantla de Baz,Estado de México C.P. 54033
Teléfono : (55)5321-1919
Sin Costo : 01800-3471919
Pagina Web:http://www.lg.com.mx/