Table of Contents
LG SVM5H-F User Manual
Displayed below is the user manual for SVM5H-F by LG which is a product in the Video Wall Displays category. This manual has pages.
Related Manuals
2
ENGLISH
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS ......... 3
- Electrical Power Related Precautions ....................3
- Precautions In Installing the Product ..................... 5
- Precautions for Moving the Product ...................... 6
- Precautions for Using/Cleaning the Product ..... 7
- Product Disposal (Only, Hg lamp used LCD
Monitor) ................................................................................. 7
LICENSES .......................................8
ASSEMBLY AND PREPARATION ..9
- Optional Accessories .......................................................9
- Parts and Buttons .........................................................10
- Portrait Layout ................................................................ 11
- Remove brackets before Installation ..................11
- Storage Method for Panel Protection ................12
- Installing on a Wall ........................................................14
- External Equipment Setup........................................16
- Tiling Displays ..................................................................17
REMOTE CONTROL .................... 21
MAKING CONNECTIONS ........... 23
- Connecting to a PC.......................................................23
- External Device Connection .....................................23
- Using the Input List ......................................................24
- Daisy Chain Monitors ..................................................25
TROUBLESHOOTING .................. 26
PRODUCT SPECIFICATIONS ...... 29
3
ENGLISH
WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
IMPORTANT PRECAUTIONS
Please read these safety precautions carefully before using the product.
WARNING
Failure to follow those warnings may result in death, serious injury or damage to the product or other property.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
WARNING
•Indoor Use Only.
Electrical Power Related Precautions
WARNING
•Use only the power cord supplied with the unit or another manufacturer’s authorized cord.
- Failure to do so may result in fire or electrical shock or damage to the product.
•Use only a properly grounded plug and receptacle.
- If you do not you may be electrocuted or injured. Or the product might be damaged.
•Do not use a damaged or loose plug.
- This may cause electrical shock or fire.
•Operate the display only from a power source(i.e. voltage) indicated in the product specification.
- Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of
power supply you have, consult a certified electrician.
•In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very
dangerous.
- It can cause electric shock.
•Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power strip
with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
•Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power
plug completely or wipe dust off before plugging in the cord.
- You may be electrocuted due to excess moisture.
4
ENGLISH
•If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Layers of dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
•Insert the power plug firm so it cannot come loose.
- A loose connection can cause fire.
•Hold the plug when pulling out the power cable. Do not pull the plug out by the wire. Do not bend the power cord
with excessive force or put heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
•Do not insert metal or other conductive materials into the product openings. Additionally, do not touch the power
cable right after plugging into the wall input terminal.
- You may be electrocuted.
•Use an appliance coupler as a disconnect device.
•Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily
accessible.
•Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
•As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the
unit is turned off.
5
ENGLISH
Precautions In Installing the Product
WARNING
•Keep away from heat sources like heaters or open flames.
- Electrical shock, fire, malfunction or deformation may occur.
•Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
•Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Prevent Children from climbing or pulling on the unit.
•Do not leave the power or signal cable where someone can trip over it.
- Pedestrians may become entangled in the cables and cause the device to become damaged causing electrical shock,
fire, or serious injury.
•Install the product in a neat and dry place. Do not use near water.
- Dust or moisture can cause electrical shock, fire or product damage.
•Do not add accessories that have not been designed for this display.
•If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact LG
Customer Service.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
•If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact LG Customer
Service.
•Do not drop an object on or apply pressure to the product. Do not throw any toys or objects at the product.
- It can cause injury to humans, problems to the product and damage the display.
•Keep out of reach of children and do not place toys near the product.
•Make sure the product ventilation hole is not blocked. Install the product more than 100mm (3.9inches) from the
wall.
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat build-
up.
•Do not cover the product with cloth or other material (eg. plastic) while plugged in.
- The product can be deformed or fire can break out due to internal overheating.
•Place the product on a flat and stable surface that is large enough to support the product.
- If the product is dropped, you may be injured or the product may be broken.
•Install the product where no Electromagnetic Interference occurs.
•Keep the product away from direct sunlight.
- The product can be damaged.
•Do not place the product on the floor.
- Small Children and others may trip over it.
•Do not install this product on a wall if it could be exposed to oil or oil mist.
- This may damage the product and cause it to fall.
•For displays with glossy bezels the user should consider the placement of the display as the bezel may cause
unwanted reflections from surrounding light and bright surfaces.
6
ENGLISH
Precautions for Moving the Product
WARNING
•Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
•Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
•When lifting or moving the product, do not hold it upside down while holding only the stand.
- This may cause the product to fall resulting in damage or injury.
•Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
•Make sure the panel faces forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire.
•Do not place the product face down.
- This may damage the TFT-LCD screen.
7
ENGLISH
Precautions for Using/Cleaning the Product
WARNING
•Do not attempt to disassemble, repair or modify the product yourself.
- Fire or electric shock can occur.
- Contact LG Customer Service for repair.
•When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not
clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not
use chemicals such as benzene, paint thinners or alcohol.)
•Keep the product away from water.
- Fire or electric shock accident can occur.
•Avoid high temperatures and humidity.
•Do not put or store flammable substances near the product.
- There is a danger of explosion or fire.
•Keep the product clean at all times.
•Take a comfortable and natural position when working with the product.
•Take a regular break when working with the product for a long time.
•Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
•Keep proper distance from the product and rest from time-to-time.
- Your vision may be impaired if you look at the product too closely or for too long.
•Set the appropriate resolution by referring to the User’s Guide.
•Keep small accessories out of the reach of children.
•Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor screen. To
avoid this problem, use a screen saver and power off when this product is not used. Persistent image or stain caused
by long time usage are not covered by the warranty on this product.
•Do not use products using high voltage around the Monitor. (ex. Electrical Swatter)
- Monitor may have malfunction as its electrical shock.
•Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only. Too much
moisture may cause staining.
WATER CHEMICALS
Product Disposal (Only, Hg lamp used LCD Monitor)
•The fluorescent lamp used in this product contains a small amount of mercury.
•Do not dispose of this product with general household waste.
•Disposal of this product must be carried out in accordance to the regulations of your local authority.
8
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visitwww.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, seehttp://patents.dts.com.Manufactured under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together, DTS 2.0 Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered
trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
9
ENGLISH
ASSEMBLY AND PREPARATION
CAUTION
•Always use genuine components to ensure safety and product performance.
•The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
•The accessories provided with your product may vary depending on the model or region.
•Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
•SuperSign Software & Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website(http://partner.lge.com)and download the latest software for your model.
•The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new
accessories may be added. The illustrations in this manual may differ from the actual product and accessories.
OPS kit
KT-OPSA
Screws
(Diameter3.0mmxLength8.0mm)
(Diameter 0.1 inchesx
Length0.3inches)
Screws
(Diameter3.0mmxLength8.0mm)
(Diameter 0.1 inchesx
Length0.3inches)
Card
(Easy Setup Guide)
Power Cord Connecting Cable
NOTE
•Optional accessories are available for some models. If necessary, please purchase them separately.
•Before you attach the OPS kit or Media Player, connect the cable to the port.
10
ENGLISH
Parts and Buttons
•: Change the input signal.
•: Accesses the main menus, or saves your input and exits the menus.
•: Adjust the up and down.
•: Moves left and right.
•: Displays the current signal and mode.
•: Turns the power on or off.
11
ENGLISH
Portrait Layout
When installing in a portrait layout, rotate the monitor clockwise 90 degrees (when facing the screen).
Remove brackets before Installation
Make sure that the protection pads are removed from each corner before installing the product.
NOTE
•Keep the removed protection pads in case you need to move the product again.
12
ENGLISH
Storage Method for Panel Protection
Correct Method
1 If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the
panel to touch the floor.
Panel
2 When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product
facing down.
Cushion
Panel
3 If there is not a cushion available, ensure the floor is clean and then lay the product down carefully with the panel
facing either upward or downward. At this time, be careful for objects not to fall on the panel.
Panel
13
ENGLISH
Incorrect Method
1 If the product is tilted onto the bezel, the bottom of the panel may be damaged.
Panel
2 If the product is tilted toward the corner of the panel, the bottom of the panel may be damaged.
Panel
14
ENGLISH
Installing on a Wall
To install the Monitor on a wall (optional), use the VESA screws provided as accessories to fasten it.
Install the monitor at least 200mm (7.8inches) away from the wall and leave about 100mm (3.9inches) of space
at each side of the monitor to ensure sufficient ventilation. Use the wall mount plate and screws that comply with the
VESA standard.
100 mm
100 mm
100mm
(3.9inches)
100 mm
200mm
(7.8inches)
CAUTION
•Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
•If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount
and contact your local dealer or qualified personnel to assist with the installation.
•Do not over tighten the screws as this may damage the monitor and void your warranty.
•Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by misuse
or use of improper accessories are not covered by the warranty.
NOTE
•Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. If
there is no other option but to mount the product on the wall, make sure that sufficient ventilation is provided before
installation.
- Failure to do so may result in a fire due to the increase in the internal temperature.
•The illustration shows a general example of installation and may look different from the actual product.
15
ENGLISH
Securing the monitor to a wall (optional)
(Depending on model)
1 Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor.
- If there are already bolts inserted in the eyebolts’ position, remove the other bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the
rear of the monitor.
3 Connect the eyebolts and wall brackets tightly with a sturdy cord.
Make sure the securing cord is horizontal with the flat surface.
WARNING
•If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
- Only using furniture that can safely support the monitor.
- Ensuring the monitor is not overhanging the edge of the supporting furniture.
- Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the
furniture and the monitor to a suitable support.
- Not placing cloth or other materials between the monitor and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the monitor or its controls.
CAUTION
•Make sure that children do not climb on or hang from the monitor.
NOTE
•Use a platform or cabinet that is large and strong enough to support the monitor securely.
•Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail store.
•The illustration shows a general example of installation and may look different from the actual product.
16
ENGLISH
External Equipment Setup
IR Receiver
This allows a remote control sensor to be placed in a custom location.
Then that display can control other displays via an RS-232C cable.
17
ENGLISH
Tiling Displays
How to Mount the Set
Example of 2x2 Tiling
Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.
Screws for attaching the VESA wall
mount (M6)
(Unit: mm (inches))
600 (23.6)
400 (15.7)
18
ENGLISH
How to Join Sets
•Lay the protective sheet on top before installing additional sets.
1 Install the additional sets using the VESA wall mounting screws by using the same method mentioned before.
(M4 x L6)
19
ENGLISH
2 Adjust the spacing between the sets using the tiling guide, and remove the protective sheet.
≥ 1 mm
(0.03 inches)
3 Complete the 2x2 tiling. You can use various options of tiling including 3x3 by using the same method.
Completeness of the Set (2x2 tiling complete)
CAUTION
•Failure to lay the protective sheet on top before installing additional sets may result in damage to the panel.
20
ENGLISH
NOTE
•The load applied to each set should be supported by the wall mount plate or the wall using a VESA wall mount
(600x400).
•The load applied to each set should be supported by the wall mount plate using a VESA wall mount. (Each set must
be firmly mounted to the wall mount plate or the wall.)
•You may mount the set without using the tiling guide; this does not affect the performance of the device.
•The screws are enclosed with the other components in the box, including the tiling guides.
21
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to
use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5VAAA) matching and
terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the
installation actions in reverse. The illustrations may differ from the actual accessories.
CAUTION
•Do not mix old and new batteries, as this may damage the remote control.
•Be sure to point the remote control toward the remote control sensor on the monitor.
•Some features of the remote control may not be supported in certain models.
•The product’s internal and external batteries should not be exposed to excessive heat such as direct sunlight, fire, or
the like.
",#
(POWER) Turns the monitor on or off.
Turns the monitor on.
Turns the monitor off.
Reduces power consumption by adjusting peak screen
brightness.
(INPUT) Selects the input mode.
This model does not support this.
Toggles between numerical and alphabetical.
Number and Alphabet buttons
Enters numerical or alphabetical characters depending upon the setting. (Depending
upon the model, this feature may not be supported.)
Deletes the entered numerical or alphabetical character. (Depending upon
the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume. (This model does not support
this.)
Selects the Aspect Ratio mode.
Automatically adjusts picture position and minimizes image instability
(available for RGB input only). (Depending upon the model, this feature may not be
supported.)
(MUTE) Mutes all sounds. (This model does not support this.)
Adjusts the brightness of the display.
This model does not support this.
22
ENGLISH
Selects the Picture Mode.
(HOME) Activates the Launcher.
Enters the White Balance menu.
(SETTINGS) Accesses the main menus or saves your input and exit menus.
SuperSign menu key. (Depending upon the model, this feature may not be
supported.)
Navigation Buttons Scrolls through menus or options.
Selects menus or options and confirms your input.
(BACK) Allows you to move back one step in the user interaction function.
Quit all OSD tasks and applications.
Allows you to control various multimedia devices to enjoy multimedia
simply by using the remote control through the SimpLink menu. (Depending upon the
model, this feature may not be supported.)
Selects the TILE Mode.
When the Picture ID number matches the Set ID number, you
can control whichever monitor you want in multi-display format.
USB Menu Control Buttons Controls media playback. (This model does not support
this.)
23
ENGLISH
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external device you
want to connect. For more information about external device connections, see the user manual provided with each
device.
Connecting to a PC
Some of the cables are not provided. This monitor supports the feature.
* : a feature that enables a PC to recognize devices attached by the user without device configuration or
user intervention when powering up.
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Some of the cables are not provided. For the best picture and sound quality, connecting external devices to your
monitor using HDMI cables is recommended.
24
ENGLISH
NOTE
•For the best image quality, using the monitor with HDMI connection is recommended.
•To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15-
pin cable and DVI-D/HDMI cable.
•Use a High Speed HDMI®/™cable.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•Recommended HDMI Cable Types
- High Speed HDMI®/™ Cable
- High Speed HDMI®/™ Cable with Ethernet
•If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change
the default audio output to HDMI.
•If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
•You may experience compatibility issues if you use HDMI-PC mode.
•Make sure the power cable is disconnected.
•If you connect a gaming device to the monitor, use the cable provided with the gaming device.
•High Speed HDMI®/™ cables transmit a HD signal up to 1080p and higher.
•Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling
system)
•Apple computers may require an adapter to connect to this monitor. Call or visit their web site for more information.
•When connecting an external audio device, use a device with audio amplifier.
CAUTION
•Connect the signal input cable and tighten it by turning the screws clockwise.
•Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on the
screen.
•Avoid displaying static images on the screen for a long period of time to prevent image retention. Use a screensaver
if possible.
•A wireless communication device near your monitor can affect the image.
Using the Input List
(HOME) →
•
25
ENGLISH
Daisy Chain Monitors
To use multiple products, first connect an external device to the product, connect one end of the supported signal input
cable to the connector of the product, and then connect the other end to the connector of the product you wish
to connect to.
AUDIO OUT AUDIO IN
DVI IN DVI OUT
DVI IN
AUDIO IN
DVI OUT
AUDIO OUT
DP OUTDP IN DP OUTDP IN DP OUTDP IN
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
DVI IN DP OUT DP OUTDP IN DP OUTDP IN
DP OUT
HDMI IN DP OUTDP IN DP OUTDP IN
LAN OUT
LAN IN LAN OUT
LAN IN LAN OUT
LAN IN
NOTE
•If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable.
•Daisy chaining the video output may be limited depending on the performance of the input device that supports
HDCP.
26
ENGLISH
TROUBLESHOOTING
No image is displayed.
Problem Action
Is the product power cord connected? •Check if the power cord is correctly plugged into the power outlet.
Does the “Invalid Format” message
appear?
•The signal from the PC (Graphics card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency range
by referring to the Specifications in this manual.
Does the “No Signal” message appear? •The signal cable between PC and product is not connected. Check the
signal cable.
•Access the input menu to check the input signal.
The Unknown Product message appears when the product is connected.
Problem Action
Did you install the driver? •Check if the function is supported by referring to the
graphics card user manual.
The screen image looks abnormal.
Problem Action
Is the screen position wrong? •Check if the graphics card resolution and frequency are supported by
the product. If the frequency is out of range, set to the recommended
resolution in the “Display” settings in Control Panel. (The settings may
differ depending on your operating system.)
The screen is displayed abnormally. •The proper input signal is not connected to the signal port. Connect the
signal cable that matches with the source input signal.
The screen flickers when the power is
turned on.
•If you turn the monitor on when it is cold, the screen may flicker. This
is normal.
27
ENGLISH
After-image appears on the product.
Problem Action
After-image appears when the product is
turned off.
•If you use a fixed image for a long time, the pixels may be damaged.
Use the screen-saver function.
•When a dark image is displayed on the screen after an image with high
contrast (black and white or gray), this may cause image sticking. This
is normal for LCD screen products.
Screen color is abnormal.
Problem Action
Screen has poor color resolution (16
colors).
•Set the number of colors to more than 24 bits (true color). Select
(Control Panel → Display → Settings → Color Table) in Windows. (The
settings may differ depending on your operating system.)
Screen color is unstable or mono-colored. •Check the connection status of the signal cable. Or, re-insert the PC
graphics card.
Do colored appear on the screen? •Several pixels (red, green, blue, white, or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. This is not a malfunction of the LCD.
The operation does not work normally.
Problem Action
The power suddenly turned off. •Is the Timer set?
•Check the power control settings. Power interrupted.
The audio function does not work.
Problem Action
No sound? •See if the audio cable is connected properly.
•See if the sound is set properly.
Sound is too dull. •Select the appropriate equalizer sound.
Sound is too low. •Adjust the volume of the external device.
NOTE
•Software related content may be changed without prior notice due to upgrades of the product functions.
28
ENGLISH
CAUTION
•Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an
extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood
of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
every 12 hours at the very minimum; if done more frequently, the prevention of image sticking is more effective.
Recommended operating conditions
1 Change the background and the character colors using the same time interval.
ID: UPM 123
PW: ****
ID: UPM 123
PW: ****
When changing colors, using complementary colors helps to prevent image sticking.
BM BM BM
CFCFCF
OC
PI
PI
TFT Layers
Glass
Glass
LC
CF
ITO or MoTi Pixel Layer
2 Change the image using the same time interval.
Make sure that the characters or images before changing the image remain in the same location after changing the
image.
What is image sticking?
When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between
the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over
time, liquid crystals have a tendency to remain aligned in one direction. During this process, a previously displayed image
remains visible. This phenomenon is referred to as image sticking.
29
ENGLISH
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions.
“ ” refers to alternating current (AC), and “ ” refers to direct current (DC).
LCD screen Screen type Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Video signal Maximum resolution HDMI1 / HDMI2 / DisplayPort: 3840x2160 @ 30Hz
DVI-D / OPS: 1920x1080 @ 60Hz
- This may not be supported on some OS or graphics card
types.
Recommended resolution 1920x1080 @ 60Hz
- This may not be supported on some OS or graphics card
types.
Horizontal frequency HDMI1 / HDMI2 / DisplayPort / DVI-D / OPS: 30kHz to
83kHz
Vertical frequency DVI-D / OPS: 56Hz to 60Hz
HDMI1 / HDMI2 / DisplayPort: 30Hz, 56Hz to 60Hz
Synchronization Separate Sync, Digital
Input/output ports
Embedded battery Applied
Environmental Conditions Operating Temperature 0 °C to 40 °C (32°F to 104°F)
Operating Humidity 10 % to 80 %
Storage Temperature -20 °C to 60 °C (-4°F to 140°F)
Storage Humidity 5 % to 85 %
30
ENGLISH
55SVM5F
LCD screen Pixel pitch 0.630 mm (H) x 0.630 mm (V)
Power Rated power AC 100-240 V ~ 50/60Hz, 2.7A
Power consumption On Mode: 200 W (Typ.)
Sleep Mode: ≤ 0.5 W
Off Mode: ≤ 0.5 W
Dimensions (Width x Height x
Depth) / Weight
1,210.51mmx 681.22mmx 86.5mm / 16.8kg
(47.6inches x 26.8inches x 3.4inches / 37lbs)
55SVH7F
LCD screen Pixel pitch 0.630 mm (H) x 0.630 mm (V)
Power Rated power AC 100-240 V ~ 50/60Hz, 2.7A
Power consumption On Mode: 210 W (Typ.)
Sleep Mode: ≤ 0.5 W
Off Mode: ≤ 0.5 W
Dimensions (Width x Height x
Depth) / Weight
1,210.51mmx 681.22mmx 86.5mm / 16.8kg
(47.6inches x 26.8inches x 3.4inches / 37lbs)
31
ENGLISH
DVI-D / HDMI1 / HDMI2 / DisplayPort / OPS (PC) Support Mode
Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remarks
800 x 600 37.879 60.317
1024 x 768 48.363 60
1280 x 720 44.772 59.855
1280 x 1024 63.981 60.02
1366 x 768 47.712 59.79
1680 x 1050 65.29 59.954
1920 x 1080 67.5 60
3840 x 2160 67.5 30 HDMI1 / HDMI2 / DisplayPort
HDMI1 / HDMI2 / DisplayPort / OPS (DTV) Support Mode
Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remarks
480/60p 31.469 59.94
576/50p 31.25 50
720/50p 37.5 50
720/60p 45 60
1080/50i 28.1 50
1080/60i 33.75 60
1080/50p 56.25 50
1080/60p 67.432 59.94
1080/60p 67.5 60
2160/24p 54 24 HDMI1 / HDMI2 / DisplayPort
2160/25p 56.25 25 HDMI1 / HDMI2 / DisplayPort
2160/30p 67.5 30 HDMI1 / HDMI2 / DisplayPort
32
ENGLISH
NOTE
•When the cable is connected to the DVI-D, HDMI or the DisplayPort, you can select the PC/DTV mode optionally. It
is recommended that you select PC mode when connecting to a PC and select DTV mode when connecting to other
devices. The DTV mode refers to all modes excluding the PC mode.
• Horizontal frequency: The horizontal interval is the time taken to display one horizontal line. When 1 is divided by
the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
•Vertical frequency: The product display functions by the screen image changing dozens of times every second like a
fluorescent lamp. The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz.
Temporary noise is normal when powering ON or OFF
this device.
The model and serial number of the product are
located on the back and on one side of the product.
Record them below in case you ever need service.
MODEL
SERIAL NO.
Supplier’s Declaration of Conformity
Trade Name LG
Responsible Party
Address
LG Electronics USA, Inc.
1000 Sylvan Ave Englewood Cliffs,
NJ 07632
Telephone (201)266-2215
This pr
oduct qualifies for ENERGY
ST
AR®.
Changing the factor
y default
c
onfiguration and settings or
enabling
certain optional features
and functionalities ma
y increase
ener
gy consumption beyond the
limits r
equired for ENERGY STAR®
ce
rtification.
Refer to ENERGYS
TAR.gov for
mo
re information on the ENERGY
ST
AR® program.