Table of Contents
Little Tikes Sparkle Bay Water Spinners User Manual
Displayed below is the user manual for Sparkle Bay Water Spinners by Little Tikes which is a product in the Bath Games, Toys & Stickers category. This manual has pages.
Related Manuals
1
638022M
Illustrations are for reference only. Styles
may vary from actual contents.
18+ MONTHS
ADULT SUPERVISION AND BATTERY INSTALLATION REQUIRED
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
Do not treat old batteries as household waste. Take them to a designated recycling facility.
1
4
Visit our website at
www.littletikes.com
to register your product and
to enter our sweepstakes.
(No purchase necessary)
Please keep this manual as it contains important information.
MGA Entertainment UK Ltd
50 Presley Way
Crownhill
Milton Keynes
MK8 0ES
Bucks, UK
0800 521 558
www.littletikes.com
www.littletikes.co.uk
© The Little Tikes Company,
an MGA Entertainment company.
LITTLE TIKES® is a trademark of Little Tikes in
the U.S. and other countries. All logos, names,
characters, likenesses, images, slogans, and
packaging appearance are the property of
Little Tikes.
Little Tikes Consumer Service
2180 Barlow Road Hudson, Ohio 44236 U.S.A.
1-800-321-0183
Printed in China
0315-0-M
The batteries included in your Little Tikes® Sparkle Bay™ Water Spinners™ are for in-store
demonstration. An adult must install fresh alkaline batteries in the crab spinner and the seahorse
spinner prior to playing for best performance. Here’s how:
1. Hold the suction cup on the Water
Spinners™ and twist the faces on the
seahorse spinner and crab spinner
counterclockwise to unlock, as
indicated by the lock symbols on
the faces. Then, pull them out. (Fig. A)
2. Using a Phillips Screwdriver
(not included) remove the screws
and battery compartment covers
from the back of the spinners’ faces.
3. Install three (3) 1.5V AG13 (LR44)
alkaline batteries (not included) into
each spinner making sure the (+) and
(-) ends face the proper direction as
indicated inside each battery
compartment. (Fig. B)
4. Replace the compartment covers
and securely tighten the screw to
ensure the compartment is
watertight.
5. Place the faces into the spinners
and twist them clockwise to lock.
BEFORE YOU BEGIN
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that
this product is free of defects in materials or workmanship for one year * from the date of
purchase (dated sales receipt is required for proof of purchase). At the sole election of The Little
Tikes Company, the only remedies available under this warranty will be the replacement of the
defective part or replacement of the product. This warranty is valid only if the product has been
assembled and maintained per the instructions. This warranty does not cover abuse, accident,
cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from
defects in material and workmanship. *The warranty period is three (3) months for daycare or
commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website
at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes
Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available
for purchase after warranty expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives
you specific legal rights, and you may also have other rights, which vary from country/state to
country/state. Some countries/states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
LIMITED WARRANTY
CONTENTS
A. 1 Seahorse Spinner
B. 1 Shell Water Scoop
C. 1 Crab Spinner
A.
B.
face
3 x 1. 5V
AG13 (LR44) Batteries
A
B
C.
Water Spinners
™
223
QUICK START
1. Wet the suction cups on the spinners and
attach them to a clean bathtub wall.
Suction strength may vary with different
wall textures. For best results, attach the
suction cup to a flat, level surface.
IMPORTANT INFORMATION
12
2. Arrange the seahorse and crab spinners on
the wall so they are closely diagonal from
each other as shown.
3
3. Use the water scoop to pour water into the
top spinner. Water will drop into the
bottom spinner if both are arranged
correctly.
4
4. Watch your spinners light up as they spin
from the water!
• Only use clear water or water with standard commercial bath additives with the spinners.
• Lift the edge of the suction cup to remove the spinners from the wall.
• Empty the spinners and scoop of all water and allow them to air dry in a well ventilated area
prior to storing.
• If moisture is present in the battery compartment, dry it with a towel.
WARNING
• Adult supervision required. To prevent drowning, children should never be left unattended
while in or near water.
• DO NOT allow children to play in water near any electrical source or apparatus.
• DO NOT leave the spinners near any electrical source or apparatus after removing them from
water.
BATTERY SAFETY INFORMATION
• Charging of rechargeable batteries should only be done under adult supervision. Use only
size “AG13” (LR44) alkaline batteries (6 required).
• Never mix old batteries with new batteries, rechargeable (nickel-cadmium) or carbon zinc
with alkaline batteries.
• Be sure to insert the batteries correctly and follow the toy and battery manufacturer’s
instruction.
• Always remove exhausted or dead batteries from the product.
• Dispose of dead batteries properly: do not burn or bury them.
• Do not attempt to recharge non-rechargeable batteries.
• Remove rechargeable batteries from the product before recharging.
• Charging of rechargeable batteries should only be done under adult supervision with
batteries removed from product.
• Avoid short-circuiting battery terminals.
• Remove batteries before placing the unit into storage for a prolonged period of time.
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution: Modifications not authorized by the manufacturer may void users authority to operate
this device.
CAN ICES-3 (B)/NMB-3(B).