MGA Entertainment 3D Design Station User Manual
Displayed below is the user manual for 3D Design Station by MGA Entertainment which is a product in the Art & Craft Toys category. This manual has pages.
Related Manuals
Connect the tube stand
on either side of the station.
Attach the 3D template to one arm.
Gel-a-Peel™ tube storage
tip storage
Press to slide station
arms together or apart.
• May contain functional sharp point.
• Keep away from eyes. Use in a well-ventilated area. Do not eat or drink while
handling this product.
• Avoid contact with skin before the compound is completely dry. Wash hands after use.
• Do not apply on furniture. To remove compound, wait for it to dry completely
and peel o. Product may not be completely removed from all surfaces.
• Color transfer may occur.
• Keep long hair and loose clothing away from the gel.
• This gel is not edible.
• Illustrations are for reference only. Styles may vary from actual contents.
MGA Entertainment UK Ltd.
50 Presley Way, Crownhill
Milton Keynes, MK8 0ES
Bucks, UK
+ 0800 521 558
Visit
.com
to register your product
and to enter our sweepstakes
(No purchase necessary)
0616-1-E/INT
Warning: Not suitable for children under 6 years. Use under adult supervision.
Please keep this manual as it contains important information
www.gelapeel.com
© 2016 MGA Entertainment, Inc. GEL-A-PEEL™ is a trademark of MGA in the U.S. and other countries.
All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of MGA.
The preferred method of contact for Customer Service
is through our e-mail contact form at www.mgae.com
16300 Roscoe Blvd.
Van Nuys, CA 91406 U.S.A.
(800) 222-4685
Printed in China
U.S. Patent Pending
CAUTIONS
Ages
8+
Conforms to
ASTM D-4236.
Design STYLES
4 SPIKE EFFECT
1 ROUND TIP
2 STAR TIP
3 RAKE TIP
5 RAINBOW EFFECT
To create a spike eect, squeeze out the gel until it reaches the size you want.
Then stop squeezing and pull the tube away.
Repeat this step with all of the spikes touching.
To create a color gradient eect, put the same tip you were using on a dierent
color tube without cleaning it and continue drawing.
Apply these design styles to any of your creations.
Twist on a design tip, press it against the 3D template, and squeeze. The longer you squeeze, the bigger the shape will be.
To create a beaded effect,
continually pull and push the
tube at an angle.
To create a beaded effect
with the star tip, continually
pull and push the tube at an angle.
To create a wavy ribbon effect,
use the rake tip to continually pull
and push the tube at an angle.
SETTING UP THE 3D STATION 542230
hardware storage
Turn to rotate template.
• 1 Station
• 1 Gel Tube Stand
• 4 Gel Tubes
• 4 Round Tips
• 1 Star Tip
• 1 Rake Tip
• 4 Earring Hooks
• 4 Jump Rings
• 2 Keychain Rings
• 2 Keychain Plugs for spheres
• 1 iPhone 5 3D Template
• 1 iPhone 6 3D Template
• 2 Sphere 3D Templates
• 1 Cone 3D Template
• 1 Tip Cleaning Spatula
• 36 Design Templates
(not shown)
INCLUDES:
Pull to raise or
push to lower the 3D
template as you design.
DESIGNING
• With a steady hand, squeeze the tube slowly over the
3D template for straight and precise lines.
• Follow the grid marks on the 3D templates to create designs.
• Rotate the 3D template as you create your design
by turning the knobs on the station arms.
• Always make sure the gel lines, spikes, dierent colors
and other designs are touching.
• To make your design sturdy, overlap your lines and
make your designs thick.
• Reinforce any thin spots or lines that don’t touch by
adding extra gel.
• Wipe the tip on a paper towel to remove excess gel before starting a
new design technique or project to keep designs neat and precise.
DRYING & WEARING
• Wait 5-10 minutes before adding additional colors to
your design to allow the rst color to dry slightly.
• Keep the 3D templates on the station while drying.
After the designs are dry, remove the 3D template
from the station and carefully peel o the design.
• Designs should not be peeled o of the 3D sphere.
• Roll bracelets onto your wrist. Don’t stretch your
nished projects or they might break.
TIPS & TRICKS
IMPORTANT: Protect the play area before use.
CREATE & Design
When you nish using a color, remove the tip.
Then, squeeze the gel as close to the tube opening
as possible and rmly push the plug into the tube.
Twist on the cap.
Secure a 3D template to the station. Press the tube tip
against the template and squeeze as you slowly
follow the pattern.
Uncap the tube.
Remove and keep the protective plug.
Then, twist on a tip.
Roll the tube down from the top as you squeeze
to push the compound toward the tip. Tape down
the rolled portion if necessary.
Let your design dry completely according to the time
on the template. Then, remove the 3D template from the station
and peel the design o of the 3D template.
Designs should not be peeled o of the 3D sphere.
1 TIP
2 DRAW
3 ROLL
4 PLUG & CAP
5 PEEL
CLEANING, REPAIRING & STORING
• If you make a mistake, wipe the gel o of the 3D template
with a paper towel before it hardens.
• To repair a broken piece, reapply gel over the broken
section and wait for it to dry.
• To clean the tips, allow gel in the tip to harden. Then use
the spatula tool to scoop out the hardened gel.
• Store tubes with the cap facing downward in the gel holders.
• Keep unused hardware or other included items in the drawers
beneath the station for easy access.
TEMPLATE DESIGNS
• Ask an adult to carefully cut out the cell phone case designs,
the charm designs and the bracelet designs.
• To secure the bracelet templates inside the 3D cone template,
carefully tape the edges to the cone.
Peel Off
CAP
PLUG
TIP
PLU G