MGA Entertainment Deluxe 5 pk Kit User Manual
Displayed below is the user manual for Deluxe 5 pk Kit by MGA Entertainment which is a product in the Art & Craft Toys category. This manual has pages.
Related Manuals
MGA Entertainment UK Ltd.
50 Presley Way, Crownhill
Milton Keynes, MK8 0ES
Bucks, UK
+ 0800 521 558
Visit
.com
to register your product
and to enter our sweepstakes
(No purchase necessary)
0416-2-E/INT
Warning: Not suitable for children under 6 years. Use under adult supervision.
Please keep this manual as it contains important information
www.gelapeel.com
© 2016 MGA Entertainment, Inc. GEL-A-PEEL™ is a trademark of MGA in the U.S. and other countries.
All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of MGA.
The preferred method of contact for Customer Service
is through our e-mail contact form at www.mgae.com
16300 Roscoe Blvd.
Van Nuys, CA 91406 U.S.A.
(800) 222-4685
Printed in China
U.S. Patent Pending
• May contain functional sharp point.
• Keep away from eyes. Use in a well-ventilated area. Do not eat or drink while
handling this product.
• Avoid contact with skin before the compound is completely dry.
• Do not apply on furniture. To remove compound, wait for it to dry completely
and peel o. Product may not be completely removed from all surfaces.
• Wash hands after use.
• Color transfer may occur.
• This gel is not edible.
GETTING STARTED
• Secure the template and clear drawing sheet to the work
surface with masking tape.
• Work from the top of the template to the bottom. If you
are right handed, work around the design from left to
right to prevent smearing. If you are left handed, work
from right to left.
• Draw outside the template lines to make designs bigger
or inside the template lines to make them smaller.
CLEANING, REPAIRING & STORING
• If you make a mistake, wipe the gel o of the clear
drawing sheet with a paper towel before it hardens.
• To repair a broken piece, reapply gel over the broken
section and wait for it to dry.
• Lay your designs at when displaying or storing to keep
their shape.
• To clean the tips, allow gel in the tip to harden. Then use
the spatula tool to scoop out the hardened gel.
DESIGNING
• With a steady hand, squeeze the tube slowly over the
template for straight and precise lines.
• Always make sure the gel lines, spikes, dierent colors
and other designs are touching.
• To make your design sturdy, overlap your lines and
make your designs thick.
• Reinforce any thin spots or lines that don’t touch by
adding extra gel.
• Rotate the template and clear drawing sheet as you create your design.
• Wipe the tip on a paper towel to remove excess gel before starting a
new design technique or project to keep designs neat and precise.
DRYING & WEARING
• Wait 5-10 minutes before adding additional colors to
your design to allow the rst color to dry slightly.
• Roll bracelets onto your wrist. Don’t stretch your
nished projects or they might break.
TIPS & TRICKS
CAUTIONS
Ages
8+
Conforms to
ASTM D-4236.
Design STYLES
4 SPIKE EFFECT
1 ROUND TIP
2 STAR TIP
3 RAKE TIP
5 RAINBOW EFFECT
IMPORTANT: Protect the play area before use.
To create a spike eect, squeeze out the gel until it reaches the size you want.
Then stop squeezing and pull the tube away. Repeat this step with all of the spikes touching.
To create a color gradient eect, put the same tip you were using on a dierent color
tube without cleaning it and continue drawing.
Apply these design styles to any of your creations.
Twist on a design tip, press it against the clear drawing sheet, and squeeze.
The longer you squeeze, the bigger the shape will be.
Try these techniques with the design tips included in some Gel-a-Peel™ packs.
Purchase other packs to collect them all!
CREATE & Design
To create a beaded effect,
continually pull and push the
tube at an angle.
To create a beaded effect
with the star tip, continually
pull and push the tube at an angle.
To create a wavy ribbon effect,
use the rake tip to continually pull
and push the tube at an angle.
When you nish using a color, remove the tip. Then,
squeeze the gel as close to the tube opening as possible
and rmly push the plug into the tube. Twist on the cap.
Place a template under the clear drawing sheet on a at
surface. Press the tube tip against the clear drawing
sheet and squeeze as you slowly follow the pattern.
Uncap the tube.
Remove and keep the protective plug.
Then, twist on a tip.
Roll the tube down from the top as you squeeze
to push the compound toward the tip. Tape down
the rolled portion if necessary.
Let your design dry completely according to the time
on the template. Then, use the included spatula to
peel it from the clear drawing sheet.
1 TIP
2 DRAW
3 ROLL
4 PLUG & CAP
5 PEEL
CAP
PLUG
TIP
PLUG