Middle Atlantic Products AX-SXR-40 User Manual
Displayed below is the user manual for AX-SXR-40 by Middle Atlantic Products which is a product in the Rack Cabinets category. This manual has pages.
Related Manuals
• Rotation of rack allows for easy access to rear
• Rack can be mounted from 3" to 40" off floor
• Rack frame has 20” depth
• Detachable rack frame allows for off-site equipment integration
• Frame heights range from 15 spaces (26-1/4") to 43 spaces (75-1/4")
• Service stand is quick and simple to install
• Ball bearings allow smooth roll out
• 450 lb. weight capacity with proper weight distribution
96-01000 / rev 5 / 2-22-12 / AX-SXR System for Millwork
The AX-SXR system allows an entire bay of equipment to pull out
and rotate for easy installation and access to rear for servicing.
The telescoping service stand and tracks disconnect for storage.
AX-SXR System shown
installed in millwork
96-01000 / rev 5 / 2-22-12
Patented EIA compliant 19" roll-out equipment rack for millwork installation shall be Middle
Atlantic Products model # AX-SXR(15 to 43 rackspaces). Rack shall have__ useable rackspaces,
overall height of __", (refer to chart) and a useable depth of 20". Rough-in millwork useable
frame depth for installed components shall be from 25-1/2" to 27-1/2" depending on setback
from millwork, and rack shall have a weight capacity of 450 lbs. Rack shall be constructed of the
following materials: top, base, caster brackets, roller base, and horizontal braces shall be 13-
gauge steel with black powder coat finish, rack uprights shall be 11-gauge steel rackrail with
tapped 10-32 mounting holes in universal EIA spacing. Rackrail shall be finished in black e-coat
with marked rackspaces, top and bottom trim / locking panels shall lock AX-SXR in closed position
and be 11-gauge aluminum with a black brushed and anodized finish. Rack top shall have
openings to accept up to 2 fans, model # AXS-FAN (one fan) or AXS-FAN-K (two fans). Service
tracks and stands shall be constructed of a 13-gauge steel frame with an aluminum extrusion.
Service tracks for AX-SXR shall be model # TRACK31 with a 31" track length and 31" rack frame
extension depth. Service stand shall be model # TRACKL (for 2-1/4” - 3-1/4” mounting height
off floor), TS310 (for 3" - 11" mounting height off floor), TS1022 (for 10" - 22" mounting height
off floor) and TS1640 (for 16" - 40" mounting height off floor). AX-SXR shall be GREENGUARD
Indoor Air Quality Certified for Children and Schools. AX-SXR shall be RoHS EU Directive
2002/95/EC compliant. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered
company. Rack shall be warrantied to be free from defects in material or workmanship for
a period of 3 years.
OPTIONS
• Optional slim fan for AX-SXR systems shall be model # AXS-FAN. Kit with 2 fans shall
be model #AXS-FAN-K
• Optional full-depth 20" front and rear mount rackshelf shall be model # SH-5A
• Brush gasket shall require 19-5/8” rough-in opening width and shall be model # BG17
• Gasket and guide to center rack and protect millwork requires 19-5/8” rough-in opening
width and shall be model # AXS-GG20
US Patent # 5, 185, 818 EIA/TIA Compliant
EXCEPTIONAL SUPPORT & PROTECTION™
C U S T O M I Z A B L E S P E C I F I C AT I O N C L I P S A VA I L A B L E AT M I D D L E AT L A N T I C .C O M
Features
C U S T O M I Z A B L E S P E C I F I C AT I O N C L I P S A VA I L A B L E AT M I D D L E AT L A N T I C .C O M
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Architects’ and Engineers’ Specifications
AX-SXR System
for Millwork & In-Wall
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Middle Atlantic Products
SIDE VIEW
23 [584]
2 [51] min.
recommended
cable
clearance
Specifications for AX-SXR System
Part # Extension Length Frame Depth Millwork Opening Depth
AX-SXR-xx* Replace ‘xx’ with the # of useable rackspaces (15 to 43 spaces) 31 [787] 20 [508] 25-1/2 [648] to 27-1/2 [699] minimum
AB
USEABLE MILLWORK OPENING
HEIGHT HEIGHT
AX-SXR-15 26-1/4 [667] (15 spaces) 33 [838]
AX-SXR-16 28 [711] (16 spaces) 34-3/4 [883]
AX-SXR-17 29-3/4 [756] (17 spaces) 36-1/2 [927]
AX-SXR-18 31-1/2 [800] (18 spaces) 38-1/4 [972]
AX-SXR-19 33-1/4 [845] (19 spaces) 40 [1016]
AX-SXR-20 35 [889] (20 spaces) 41-3/4 [1060]
AX-SXR-21 36-3/4 [933] (21 spaces) 43-1/2 [1105]
AX-SXR-22 38-1/2 [978] (22 spaces) 45-1/4 [1149]
AX-SXR-23 40-1/4 [1022] (23 spaces) 47 [1194]
AX-SXR-24 42 [1067] (24 spaces) 48-3/4 [1238]
AX-SXR-25 43-3/4 [1111] (25 spaces) 50-1/2 [1283]
AX-SXR-26 45-1/2 [1156] (26 spaces) 52-1/4 [1327]
AX-SXR-27 47-1/4 [1200] (27 spaces) 54 [1372]
AX-SXR-28 49 [1245] (28 spaces) 55-3/4 [1416]
AX-SXR-29 50-3/4 [1289] (29 spaces) 57-1/2 [1461]
AX-SXR-30 52-1/2 [1334] (30 spaces) 59-1/4 [1505]
AX-SXR-31 54-1/4 [1378] (31 spaces) 61 [1549]
AX-SXR-32 56 [1422] (32 spaces) 62-3/4 [1594]
AX-SXR-33 57-3/4 [1467] (33 spaces) 64-1/2 [1638]
AX-SXR-34 59-1/2 [1511] (34 spaces) 66-1/4 [1683]
AX-SXR-35 61-1/4 [1556] (35 spaces) 68 [1727]
AX-SXR-36 63 [1600] (36 spaces) 69-3/4 [1772]
AX-SXR-37 64-3/4 [1645] (37 spaces) 71-1/2 [1816]
AX-SXR-38 66-1/2 [1689] (38 spaces) 73-1/4 [1861]
AX-SXR-39 68-1/4 [1734] (39 spaces) 75 [1905]
AX-SXR-40 70 [1778] (40 spaces) 76-3/4 [1949]
AX-SXR-41 71-3/4 [1822] (41 spaces) 78-1/2 [1994]
AX-SXR-42 73-1/2 [1867] (42 spaces) 80-1/4 [2038]
AX-SXR-43 75-1/4 [1911] (43 spaces) 82 [2083]
MILLWORK SPECIFICATIONS
1/2 [13] min. , 2-1/2
[66] max. setback
TRACK31 -
31 [787]
max.
25-1/2 [648]
min. depth with
1/2 [13] setback
27-1/2 [699]
min. depth with
2-1/2 [64]
setback
20 [508]
TOP VIEW
FRONT VIEW
AB
19-1/4 [489] minimum
finished opening width
without gasket
19-5/8 [502] when
using optional gasket
2.25 [57] min.
40 [1016]
max.
All dimensions in inches unless otherwise noted [All bracketed dimensions are in millimeters]
FRONT VIEW
4-1/2 [114]
minumum
clearance
for rotation
4-1/2 [114]
minumum
clearance
for rotation
TOP VIEW
(fully extended and rotated)
16.5 [419] 4X Ø.281 [7] X 1.125 [29] OB
17.5
[445]
9.5
[241]
18.00 [457]
10X Ø.281 [7]
2.00 [51]
9.625 [244]
9.625 [244]
1/2 [13] MIN.
2 1/2 [63] MAX
SET BACK
1.50 [38]
11.5 [292]
4X .75 [19]
NOTE: Service stand
TS1022 and TS1640 in
outer-most position will
extend .517” beyond
track, TS310 will extend
4.743” beyond track,
TRACKL does not
extend beyond track.
.518 [13]
TS1022/
TS1640 and
4.743 [120]
TS310
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Middle Atlantic Products
SETBACK
(SEE SPECS PG.2)
useable
rackspace
X 1.75
NOTE:
To calculate rail to front edge
clearance, use the numbers in
“Millwork Specs” in conjunction
with the clearance for any door
or face you may provide for your
millwork installation.
1.85 [47]
19.13 [486] min. clearance
FRONT VIEW
(AX-SXR inner frame)
SETBACK
Service Stands
Part # Height Range Off Of The Floor
TRACKL 2-1/4 [57] to 3-1/4 [82]
TS310 3 [76] to 11 [279]
TS1022 10 [254] to 22 [559]
TS1640 16[406] to 40 [1016]
Specifications for AX-SXR System
Millwork Specifications
Service Track
Part # Track Length
TRACK31 31 [787]
Note: AX-SXR cannot be used
with tracks of other lengths
All dimensions in inches unless otherwise noted [All bracketed dimensions are in millimeters]
* When used with gasket and guide kit, millwork opening must be 19-5/8 [498] min.
Part # Width
Millwork Opening (see charts on page 2)
Rough Opening Height Depth
AX-SXR* 19-1/4 [489] min. number of useable rackspaces + 6-3/4 [171] 25-1/2 [648] to 27-1/2 [699] min.
4.53 [115]
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Middle Atlantic Products, Inc.
Middle Atlantic Products
®
Service Stands
Part # Height Range Off of the Floor
TRACKL 2-1/4 [57] to 3-1/4 [82]
TS310 3 [76] to 11 [279]
TS1022 10 [254] to 22 [559]
TS1640 16 [406] to 40 [1016]
22.00 [559]
18.00 [457] 18.00 [457]
19.125 [486]
.687
[17]
.518
[13]
.518
[13]
4.743 [120]
17.375
[441] typ
TRACKL with TRACK31 TS310 with TRACK31
TS1640 with TRACK31TS1022 with TRACK31
Service Stands
All dimensions in inches [Bracketed dimensions are in millimeters]
Cable Management
AXS System factory-installed
in Middle Atlantic Products
steel cabinets, please see
A&E Specification # 96-055S.
* For information on host cabinets, please see
A&E Specification
# 96-052SA (WRK-SA)
# 96-039 (MRK)
# 96-038 (ERK)
Also available from Middle Atlantic Products
WR Series rotating roll-out enclosure, does
not require tracks or stands for servicing,
please see A&E specification # 96-01005.
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Middle Atlantic Products