Middle Atlantic Products BGR-CC-45FB User Manual
Displayed below is the user manual for BGR-CC-45FB by Middle Atlantic Products which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
BGR SERIES
Cable Chases
installation instructions
3) Install cable chase bottoms onto spacers located at the front and rear of joined racks. Install front
and rear tops once bottoms are in place. (FIGURE C)
NOTE: Cable chase markings will identify chase and proper orientation. (FIGURE C)
1) Remove plastic caps from racks. (FIGURE A)
2) Install spacers between racks at the front and rear
using supplied bolts (four places each). Front and rear
spacers are installed at the first hole position as shown.
(FIGURE B)
FRONT TOP
REAR TOP
Spacers
Front of Rack Rear of Rack
FIGURE A
Front Cable Chase Rear Cable Chase
INSTALLATION (41SP/45SP SIZES)
FIGURE B
FIGURE C Spacer
I-00484 Rev B
Plastic
Cap
Bolts
4) Reinstall plastic caps (extras provided).
Bottoms do not have handles
INSTALLATION (38SP SIZE)
Page 2
FRONT TOP
FRONT TOP
1) Remove plastic caps and install spacers using supplied bolts at the front and rear of the rack
(three places each). Install front and rear cable chases as previously described in step 3.
(FIGURE D)
2) Reinstall plastic caps (extras provided).
FIGURE D
LOCK INSTALLATION
Page 3
1) Knock out the lock holes on the top panels. (FIGURE E)
2) Insert the lock cylinder into panel and secure with clip.
(FIGURE E)
3) Attach the cam to the lock cylinder with screw. (FIGURE E)
NOTE: Refer to FIGURE E for proper orientation of cam.
FIGURE E
Lock Holes
Lock Cylinder
Clip
Screw
Cam
NOTE: Requires BGR-CC-xxLT Cable Chase Top (Sold Separately).
Page 4
WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the BGR Cable Chases to be free from defects in material or workmanship under
normal use and conditions for the lifetime of the product.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty
shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the
Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after
inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by parties other than the Company, or
any modification or alteration of the products. In addition, this warranty does not cover damage due to improper handling, assembly,
installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF
THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO
EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax 973-839-1976 / International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice 613-836-2501 - Fax 613-836-2690 / middleatlantic.ca - customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.