Middle Atlantic Products BRK20-22 User Manual
Displayed below is the user manual for BRK20-22 by Middle Atlantic Products which is a product in the Rack Cabinets category. This manual has pages.
Related Manuals
I-00274 Rev B
MBRK/BRK Series
22" AND 28" DEEP LAMINATE RACK
Instruction Sheet
SMOKED, TEMPERED
GLASS DOOR
RK-GDxx
MBRK/BRK
(With options) CASTER
RKW-HD
REAR ACCESS
PANEL
(RK-RAPx)
FAN KIT
(DCFANKIT-4)
THANK YOU
Thank you for purchasing the MBRK/BRK Series 22" and 28" Deep Laminate Rack. Please read
these instructions thoroughly before assembling this product.
PRODUCT FEATURES
- Sturdy design
- Easy to assemble
- Multiple options are available for different configurations
MBRK/BRK
(Rack only)
Page 2
#8 x 3/4
Wood Screw
(32)
#10 x 5/8
Wood Screw
(6)
1/2 turn fasteners
(22" deep, Qty 16)
(28" deep, Qty 20)
NOTE: Extra hardware may be included.
Rackrail
(4)
2 Space Rackrail
(2)
Corner Brace
(4)
#2 Phillips screwdriver
PARTS
SIDE
(INTERCHANGEABLE)
(2)
TOP/BOTTOM
(INTERCHANGEABLE)
(2)
TOOLS REQUIRED
Bolt
(22" deep, Qty 16)
(28"deep, Qty 20)
NOTE: 16 space and up racks
require corner braces.
NOTE: 2 Space Rails can be
installed anywhere on side
panels at rear of rack to
provide a location to mount
cable management products
such as Lacer Bars Model #
LBP-xx (See Page 9).
Page 3
ASSEMBLY
NOTE: It is recommended that installation
of rackrail and other options be
completed after rack is assembled.
1) Using a screwdriver, install bolts to
top/bottom panels as shown.
(See FIGURE A)
NOTE: Do not overtighten.
BOLT
TOP/BOTTOM PANEL
FIGURE A
2) Install 1/2 turn fasteners to sides as shown.
(See FIGURE B)
NOTE: 1/2 turn fasteners must be installed
with arrow facing edge of panel.
SIDE PANEL
FIGURE B
EDGE OF PANEL
ARROW
1/2 TURN FASTENERS
Page 4
ASSEMBLY (Continued)
3) For ease of assembly, install one
side panel and one top/bottom
panel as shown. (See FIGURE C)
Turn 1/2 turn fasteners clockwise to tighten.
NOTE: Do not overtighten.
NOTE: Labels on side panels indicate bottom
of panels. Ensure side panel labels
face in the same direction.
FIGURE D
4) Assemble rest of rack as shown. (See FIGURE D)
Turn 1/2 turn fasteners clockwise to tighten.
NOTE: Do not overtighten.
FIGURE C
Page 5
ASSEMBLY (Continued)
5) Stand rack upright and install corner braces (4 places) into pre-drilled
holes as shown (See FIGURE E) using the 8 x 3/4" wood screws provided.
WARNING: Corner Braces must be used on 16 space and up
racks
CORNER BRACE
#8 x 3/4 WOOD SCREW
FIGURE E
Page 6
DETERMINE YOUR OPTIONS BEFORE INSTALLING RACKRAILS.
1 2 3
TOP
3 2 1
If Door (RK-GDxx) and Rear Access
Panel (RK-RAPx) are not being used.
Front and rear rackrail can be installed
in any one of 3 positions. (See FIGURE F)
Determine location by preference and
equipment being installed.
If Door (RK-GDxx) and Rear Access
Panel (RK-RAPx) are being used.
Front rackrail is to be installed in
position 2 and rear rackrail is to be
installed in position 3. (See FIGURE F)
FIGURE F
NOTE: If more clearance is required in
front of rack (i.e. knobs, handles)
move the front rackrail to
position 3. (See FIGURE F)
BOTTOM
(Top view showing front rackrail and rear rackrail
installed in position 3)
(Top view showing front rackrail and rear rackrail
installed in position 1)
(Top view showing front rackrail installed in position 2,
and rear rackrail installed in position 3)
REARFRONT
Page 7
ASSEMBLY (Continued)
6) Install rackrail as shown (See FIGURE G) using the 8 x 3/4" wood screws provided.
NOTE: Use all pre-drilled holes provided.
(Quantity of pre-drilled holes
varies with rack height)
#8 x 3/4" WOOD SCREW
FRONT
REAR
#8 x 3/4" WOOD SCREW
FIGURE G
Page 8
Rear Access Panel
(1)
Top Panel
(1)
Cable Management Bottom Panel
(1)
2) Fan Kit (DCFANKIT-4) provides optimum thermal
management. (Use of Rear Access Panel required)
Cable Tie Mount
(5)
Fan Panel
(1)
Power Supply
(1)
3) Smoked tempered glass door (RK-GDxx) secures components and enhances appearance.
In Line Thermostatic Controller
(1)
OPTIONS
1) Rear Access Panel (RK-RAPx) for equipment
protection, thermal and cable management.
Door
(1)
Page 9
4) Heavy Duty Casters (RKW-HD) for 22" and 28" deep racks.
Locking Casters
(2)
Non-Locking Casters
(2)
CABLE MANAGEMENT EXAMPLE
2 Space rackrails must be
mounted parallel vertically
and horizontally anywhere
on the side panels in the rear
of the rack.
2 Space rackrail
(comes with rack) Lacer bar (shown
using LBP-2A)*
OPTIONS (Continued)
TIP: Using the 2 Space Rackrail and screws provided, you can mount any of our horizontal lacer bars
(optional) behind a component (for example) to facilitate cable management, providing for a
neater and easier installation to service.
*You can use any of our optional horizontal lacer
bars: LBP-1R,
LBP-1S,
LBP-1A,
LBP-2A, 4A, 6A,
LBP-1.5,
LBP-1R4
Page 10 30% Recycled Paper
WARRANTY
Middle Atlantic Products (the "Company") warrants the MBRK/BRK Series 22” and 28” Deep
Laminate Rack to be free from defects in material or workmanship under normal use and conditions
for a period of (7) seven years from date of shipment by the Company.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and
exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of
and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products
purchased, or any part or parts thereof, which the Company has determined to be defective after
inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this
warranty does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE
PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY)
HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS
PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax 973-839-1976
International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice 613-836-2501 - Fax 613-836-2690
middleatlantic.ca - customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.