Table of Contents
Middle Atlantic Products CAB-COOL User Manual
Displayed below is the user manual for CAB-COOL by Middle Atlantic Products which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
I-00217 Rev D
CAB-COOL SERIES
Quiet-Cool Series Cabinet Cooler(s)
Instruction Sheet
THANK YOU
Thank you for purchasing the CAB-COOL Cabinet Cooler(s). Please read these instructions
thoroughly before installing / assembling this product.
PRODUCT FEATURES
- Extends equipment life
- Removes heat from smaller cabinets and entertainment centers
- Grille can be painted to match aesthetics of any environment
TM
Page 2
3 3/16"
[80mm]
3 1/8"
[78mm]
1/2"
[13mm]
5 1/4" [133mm]
4 1/2"
[114mm]
1 5/16"
[32mm]
9/16"
[15mm]
SPECIFICATIONS
FAN UNIT
INLINE FAN CONTROL
MODEL
TOP VIEW
SIDE VIEW
1 1/2"
[37mm]
POWER
REQUIREMENTS CFM dBA @ 1 METER
CAB-COOL 12 VDC @ 120mA 20 24
INLINE FAN CONTROL OPERATION
- Jumper on two center pins (default location) fan will turn on at 87 and turn off at 85.
- Jumper on two left pins, fan will remain off.
- Jumper on two right pins, fan will remain on.
oo
CAB-COOL-2 12 VDC @ 240mA 40 27
Page 3
PARTS
FAN UNIT QTY
CAB-COOL 1
CAB-COOL-2 2
Please read instructions
before using this template.
TOOLS REQUIRED
- 3.5" Hole Saw
- 3/32" Drill Bit
- #2 Phillips Head Driver
WIRE TIE QTY
CAB-COOL 5
CAB-COOL-2 10
WIRE TIE MOUNT QTY
CAB-COOL 5
CAB-COOL-2 10
WOOD SCREW QTY
CAB-COOL 8 (2 Extra)
CAB-COOL-2 16 (4 Extra)
LOUVERED GUARD QTY
CAB-COOL 1
CAB-COOL-2 2
POWER SUPPLY QTY
CAB-COOL 1
CAB-COOL-2 1
INLINE FAN CONTROL QTY
CAB-COOL 1
CAB-COOL-2 1
FAN UNIT QTY
CAB-COOL 1
CAB-COOL-2 2
Page 4
INSTALLATION
1) Mark center lines as shown. Remove adhesive back on the template and press firmly onto
the desired location. Make sure notches on template line up with center lines.
2) On the front of cabinet, using a 3.5" Hole Saw, cut a hole in the center mark on the
template. (Louvered Guard will cover what remains of the template)
3) Remove the Louvered Guard from the fan unit. Gently bend hinges forward and insert the fan unit
through the inside of the cabinet.
Please read instructions
before using this template.
Please read instructions
before using this template.
HINGE
Page 5
4) Gently bend hinges back. Align holes on the hinges to the " " mark on template. (Snap Fasteners
can be positioned to the top and bottom for horizontal louvre installation or to the left/right sides for
vertical louvre installation)
6) Attach Louvered Guard using Snap Fasteners. (An audible "snap" is heard once Snap Fastener is
engaged). Adjust Guard for air flow and/or aesthetic needs.
Please read instructions
before using this template.
Please read instructions
before using this template.
Please read instructions
before using this template.
SNAP FASTENER
SNAP FASTENER
Please read instructions
before using this template.
SNAP FASTENER
SNAP FASTENER
HORIZONTAL MOUNTING VERTICAL MOUNTING
HORIZONTAL MOUNTING VERTICAL MOUNTING
HORIZONTAL MOUNTING VERTICAL MOUNTING
5) It is recommended that you drill four pilot holes using a 3/32" drill bit. Drill on the " " marks.
Using a #2 Phillips Head Driver, carefully affix the unit with the four provided Wood Screws.
Page 6
7) Using two provided Wood Screws, mount Inline Fan Control at the highest available
location in your cabinet.
TIP: Make sure the Wood Screws are not longer than the panel they will be installed in.
8) Run the cable from the Fan Unit to the Inline Fan Control.
(Inputs 1 and 2 are interchangeable)
9) Connect Power Supply to power source. Connect Power Supply to
input on Inline Fan Control.
NOTE: Wire Ties and Wire Tie Mounts are provided for cable management.
(SEE PAGE 7)
Page 7
POWER SUPPLY
Jumper shown in default position
(See page 2 for Jumper functions)
INLINE FAN CONTROL
CAB-COOL-2 SETUP
CAB-COOL SETUP
Page 8 30% Recycled Paper
WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the CAB-COOL Series Cabinet Cooler(s) to be free from defects in material or workmanship under normal use and conditions
for a period of (3) three years from date of shipment by the Company.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's option, to
either (a) return of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof, which the Company
has determined to be defective after inspection thereof at the Company's factory. This warranty does not cover damage due to acts of God,accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this warranty does not cover damage due to improper handling, assembly, installation or
maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY
OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF
THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax 973-839-1976 / International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice 613-836-2501 - Fax 613-836-2690 / middleatlantic.ca - customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO14001 Registered Company.
INTAKE
(Direction of airflow noted by arrow)
EXHAUST
(Direction of airflow noted by arrow)
INTAKE/EXHAUST OPTION
The CAB-COOL-2 allows for two fans to operate within the same cabinet as an intake/exhaust source.
This can be achieved by inverting one of the CAB-COOL fans so that the direction of airflow is opposite
its counterpart.