Middle Atlantic Products IUQFP-4RA User Manual
Displayed below is the user manual for IUQFP-4RA by Middle Atlantic Products which is a product in the Rack Cooling Equipment category. This manual has pages.
Related Manuals
middleatlantic.com | middleatlantic.ca
what great systems are built on.™
96-01037 / rev g / 10-5-15
UQFP Series
ultra quiet fan panels
provides smart cooling and monitoring where
fan noise is not an option
features:
• Quiet operation, 27dB at full speed for 4 fan models,
24dB at full speed for 2 fan models
• Overtemp and fan failure notification
• 100 CFM in 4 fan units, 50 CFM in 2 fan units
• Available with commercial and designer inspired
aesthetic treatments
• Fan speeds proportional to temperature of enclosure
to extend fan life, reduce dust and maintenance
• Model available with intake and exhaust units
• Temperature probe with 9’ cord and wire ties included
• Compact design occupies only 2 rackspaces
UQFP-4RA-I/O
UQFP-4DRA
UQFP-4RA UQFP-4D
UQFP-2D
UQFP-4
EIA/TIA COMPLIANT
Model #s UQFP-2, UQFP-4
EIA compliant 19” Ultra Quiet Fan Panel shall be Middle Atlantic Products model # UQFP-__(2,4). Panel shall be constructed of 16-gauge steel,
finished in a durable black powder coat and shall occupy 2 rackspaces. Fans shall activate at 81°F (27°C), reach full speed at 90°F (32°C) and switch off
at 79°F (26°C). Fans shall displace __CFM (50,100) with a maximum decibel level of __ (24,27) dB (measurements made 1 meter from source, centered
horizontally and vertically). Overtemp alarm set point shall be 100°F (37°C). Panel shall provide local status notification of power (green LED), fan speed
(yellow LED) and overtemp (red LED). Fan LED light shall blink relative to fan speed. Rear, normally open dry switch closure shall provide overtemp alarm
signal to compatible, customer supplied monitoring device. Fan panel shall be RoHS EU Directive 2002/95/EC compliant. Fan panel shall be manufactured
by an ISO 9001 and ISO 14001 registered company. Fan panel shall be warrantied to be free from defects in materials and workmanship under normal use
and conditions for a period of 3 years. Panel shall include a UL Listed 5V DC power supply with 6’ cord and temperature probe with a 9’ cord.
Model #s UQFP-2D, UQFP-4D (with display)
EIA compliant 19” Ultra Quiet Fan Panel with local notification display shall be Middle Atlantic Products model # UQFP-__(2,4)D. Panel shall be
constructed of 16-gauge steel, finished in a durable black powder coat and shall occupy 2 rackspaces. Fans shall activate at 81°F (27°C), reach full speed
at 90°F (32°C) and switch off at 79°F (26°C). Fans shall displace __CFM (50,100) with a maximum decibel level of __ (24,27) dB (measurements made
1 meter from source, centered horizontally and vertically). Panel shall provide local status notification of power (green LED), fan speed (yellow LED) and
overtemp (red LED). Fan LED light shall blink relative to fan speed. Rear, normally open dry switch closure shall provide overtemp alarm signal to compatible,
customer supplied monitoring device. Overtemp alarm set point shall be user definable from 95°-115°F (35°-46°C). Unit shall remember settings when
unplugged or during power outage. Front display shall provide notification of overtemp and fan fault conditions. Rear, normally open dry switch closure
shall provide fan fault alarm signal to compatible, customer supplied monitoring device. Alarm set point button shall control Fahrenheit/Celsius setting and
overtemp alarm threshold in 1-degree increments. Fan panel shall be RoHS EU Directive 2002/95/EC compliant. Fan panel shall be manufactured by an
ISO 9001 and ISO 14001 registered company. Fan panel shall be warrantied to be free from defects in materials and workmanship under normal use and
conditions for a period of 3 years. Panel shall include a UL Listed 5V DC power supply with 6’ cord and temperature probe with a 9’ cord.
Model #s UQFP-4RA, UQFP-4RA-I/O, UQFP-4DRA, UQFP-4RIS, UQFP-4RA-INT (Designer Inspired)
Designer Inspired Ultra Quiet Fan Panel shall be Middle Atlantic Products model # UQFP-4__. Overtemp alarm set point shall be user definable from
95°-115°F (35°-46°C) (not available on UQFP-4RA, UQFP-4RA-I/O, UQFP-4RIS or UQFP-4RA-INT). UQFP-4RA-INT shall include an intake only.
UQFP-4RA-I/O shall include an intake and exhaust fan. UQFP-4RIS shall be intake only, and connect with an ethernet cable. Overtemp alarm output shall
be normally open dry contact closure for use with customer supplied monitoring system. Unit shall remember settings when unplugged or during power \
outage. Fans shall activate at 81°F (27°C) and operate at speeds proportional to temperature inside enclosure. Fans shall displace 100 CFM with a
maximum decibel level of 27dB (measurements made 1 meter from source, centered horizontally and vertically). Fan panel shall occupy two rackspaces.
Chassis shal be constructed of 20-gauge steel with 16-gauge aluminum face. Fan panel shall provide local sensor fault notification (not available on
UQFP-4RA or UQFP-4RA-I/O). Fan panel shall be RoHS EU Directive 2002/95/EC compliant. Fan panel shall be manufactured by an ISO 9001 and ISO
14001 registered company. Fan panel shall be warrantied to be free from defects in materials and workmanship under normal use and conditions for a
period of 3 years. Panel shall include a UL Listed 5V DC power supply with 6’ cord and temperature probe with a 9’ cord.
Customizable specification clips available at middleatlantic.com
specifications:
middleatlantic.com | middleatlantic.ca
what great systems are built on.™
Part #
# of
Fans
Overtemp Notification User
Definable
Overtemp
Setting
Fan Failure
Notification
Local & Remote
Display
Sensor Fault
Notification
Local
Current
Draw at
5 Volts DC
Airflow
at Full
Speed
dB level
at Full
Speed Finish
Racking
Height
Local
LED
Local
Display Remote
UQFP-2D 2 • • • • • • 550 mA 50 CFM 24 dB black powder coat 2 space
UQFP-4D 4 • • • • • • 1.1 A 100 CFM 27 dB black powder coat 2 space
UQFP-2 2 • • 550 mA 50 CFM 24 dB black powder coat 2 space
UQFP-4 4 • • 1.1 A 100 CFM 27 dB black powder coat 2 space
UQFP-4DRA 4 • • • • • 560 mA 100 CFM 27 dB black brushed anodized 2 space
UQFP-4RA 4 • 510 mA 100 CFM 27 dB black brushed anodized 2 space
UQFP-4RA-I/O 8 • 1.1 A 100 CFM 30 dB black brushed anodized 4 space
UQFP-4RA-INT** 4 560 mA 100 CFM 27 dB black brushed anodized 2 space
UQFP-4RIS* 4 510 mA 100 CFM 27 dB black brushed anodized 2 space
all dimensions in inches unless otherwise noted [all dimensions in brackets are in millimeters]
UQFP Series
basic dimensions
*The UQFP-4RIS is an intake panel and can only be used in conjunction with the UQFP-4RA and UQFP-4DRA
**UQFP-4RA-INT is a standalone intake unit without display (cannot be controlled by other models)
OVER
TEMP
ALARM
(N.O.)
12VDC
1A
FAN
FAULT
ALARM
(N.O.)
CONTROL SETTINGS
Press once to view the current
overtemp alarm setting.
Each additional push will raise
the overtemp alarm setting
by 1O .
To toggle between Fahrenheit
and Celsius, press and hold for
3 seconds.
PUSH
Temperature
Probe
Probe
Linearization
Processor
A/D
Converter
Alarm
Set Input
SPI
Interface
Microcontroller
Fan Fault
Input
Pulse Width
Modulation
Alarm
Output
Alarm Set
Interface
Temperature
Display
Fan Drive
Processor
Fan
Rotation
Sensor
Fan Fault
Processor
Dry Contact
Outputs
Fan Fault
Alarm Output
Overtemp
Alarm Output
UQFP-4Dtop view
front view
rear view
side view side view
front view
rear view
3.33
[85]
2.63
[67]
3.49 [89]
2 spaces
19.00 [483]
display (not on UQFP-4RA)
temperature probe
intake control (no input)
(UQFP-4DRA & UQFP-4RA only)
5VDC input jack
fan fault alarm output
overtemp alarm output
control switch setting
(UQFP-4DRA & UQFP-4DRC only)
3.12
[79]
19.00 [483]
3.49 [89]
2 spaces
power LED (green)
display (UQFP-2D, UQFP-4D)
fan fault alarm output (UQFP-2D, UQFP-4D)
overtemp alarm output
5 VDC input jack
9’ temperature probe
alarm set point button
(UQFP-2D, UQFP-4D)
2.74
[70]
.46 [12]
.5 [13]
.02 [0]
2.44
[62]
.21 [5]
fan LED (yellow)
over temp LED (red)
UQFP-4XXX top view