Middle Atlantic Products LL-VWM-BPK User Manual
Displayed below is the user manual for LL-VWM-BPK by Middle Atlantic Products which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
I-00799 Rev -
VWM SERIES
Lever Lock™ Backpan Option
Instruction Sheet
Thank you for purchasing a VWM Lever Lock™ Backpan option. Please read these instructions
thoroughly before installing or assembling this product.
For more information, refer to the VWM Series
Vertical Wall Mount Rack Instruction Sheet (I-00796).
THANK YOU
• Locks in place without tools in VWM Series Vertical Wall Mount enclosures
• 6” plate with multi-pattern designed to hold a wide range of small devices
PRODUCT FEATURES
REQUIRED TOOLS
Page 2
SUPPLIED COMPONENTS AND HARDWARE
• No. 2 Phillips Driver
(6x) 6-32 x 5/16
Phil. Bonding Screw
B
Backpan
Lever Lock Plate
(LL-VP176-SWP)
C
Backpan
Lever Lock
Brackets
A
1. Use (4x)
6-32 x 5/16 bonding
screws (B, 2 per side) to install the brackets (A) into any of the following
backpan locations. (FIGURE A)
INSTALLING THE LEVER LOCK BACKPAN OPTION
FIGURE A
LOCATION 1
LOCATION 2
LOCATION 3
Bracket
Bonding Screw
Holes on
Backpan
(4x holes per
location)
!
!
CAUTION! The bonding screws must be
used as explained to ensure proper
bonding.
ATTENTION! Les vis doivent être utilisées
comme expliqué pour assurer approprié
électrique de liaison.
B
(2x) Lever Lock
Securing Rivet
D
(20x) Lever Lock
Plate Washer
E
Page 3
NOTE: The bracket bonding screw holes are located on the inside edges of the backpan. Each bracket
is assembled as shown. (FIGURE B)
INSTALLING THE LEVER LOCK BACKPAN OPTION (CONTINUED)
FIGURE B
Bracket Bonding
Screw Holes
Page 4
INSTALLING THE LEVER LOCK BACKPAN OPTION (CONTINUED)
!
!
2. Insert the side of the Lever Lock backpan plate (C) without the clip into the brackets (A) first. Then
install the side with the clip until it clicks into place. (FIGURE C)
FIGURE C Bottom
Clip
Side with
clip
Side without
clip
A
C
NOTE: Install plastic securing
rivet (D) into hole to secure
the clip more permanently, if
desired.
NOTE:
• The Lever Lock backpan plate may be installed on the brackets at different depths. All 4 corners of
the Lever Lock backpan plate must be inserted into the brackets at the same depth in order to function
correctly.
• (20x) Lever Lock plate washers (E) are provided for equipment mounting convenience.
Page 5
For warranty information, refer to www.middleatlantic.com/terms.
Corporate Headquarters
Corporate Voice: 973-839-1011 - Fax: 973-839-1976 / International Voice: +1 973-839-8821
Fax: +1 973-839-4982
www.middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice: 613-836-2501 - Fax: 613-836-2690 / ca.middleatlantic.com -
customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
WARRANTY
!
!
