Middle Atlantic Products OBRK8 User Manual
Displayed below is the user manual for OBRK8 by Middle Atlantic Products which is a product in the Rack Cabinets category. This manual has pages.
Related Manuals
I-1103 Rev K
MBRK/OBRK SERIES
18" Deep Laminate Rack
Instruction Sheet
THANK YOU
Thank you for purchasing the MBRK/OBRK Series 18" Deep Laminate Rack. Please
read these instructions thoroughly before assembling this product.
PRODUCT FEATURES
- Sturdy design
- Easy to assemble
- Multiple options are available for different configurations
Page 2
TOOLS REQUIRED
#2 Phillips Driver
PARTS
SIDES
(INTERCHANGEABLE)
(2)
TOP/BOTTOM
(INTERCHANGEABLE)
(2)
Stick on
bumper
(5 - one extra)
Bolt
(12)
1/2 turn fastener
(12)
Page 3
1) Using a screwdriver, install
bolts to top/bottom panels as
shown. (See FIGURE A)
CAUTION: Do Not Over Tighten.
2) Install 1/2 turn fasteners into sides as
shown. (See FIGURE B)
NOTE: 1/2 turn fasteners must be installed
with arrow facing edge of panel.
NOTE: It is recommended that any reconfiguring
or addition of rackrail be done after the rack
is assembled.
ASSEMBLY
BOLT
1/2 TURN FASTENER
SIDE PANEL
TOP/BOTTOM
PANEL
EDGE OF PANEL
ARROW
FIGURE B
FIGURE A
Page 4
ASSEMBLY (Continued)
4) Assemble rest of rack as shown (See FIGURE D). Turn 1/2 turn fasteners
clockwise to tighten.
5) Install stick-on bumpers if not using optional casters.
6) Assembly of rack is completed. Options and additional rackrails can now be installed.
3) For ease of assembly, install one
side panel and one top/bottom
panel as shown. (See FIGURE C) Turn
1/2 turn fasteners clockwise to tighten.
NOTE: Do Not Over Tighten.
NOTE: Do Not Over Tighten
FIGURE D
FIGURE C
RIGHT SIDE
RIGHT SIDE
LEFT SIDE
STICK ON
BUMPER
(4 PLACES)
Page 5
ASSEMBLY (Continued)
3 2 11 2 3
MOUNTING HOLE
LOCATIONS
Smoked, tempered glass door, Part # - RK-GDxx
Rear rackrail, Part # - RK-RRxx
Quick-Position™ Shelf , Part # - SH-BRK (Cannot be installed with front or
Casters, Part # - RKW
Power Strip, refer to our catalog or middleatlantic.com for a complete listing
_
_
_
_
_
Rear Access Panel, Part # - RK-RAPxx (Not available for 6 space racks)
_
100 CFM DC Fan Kit, Part # - DCFANKIT-4.
_
DETERMINE OPTIONS BEFORE CONTINUING
rear rackrail in the 3rd setback location - see below)
1) Determine rail mounting requirements. The front rackrail comes pre-installed in mounting location 1.
- If the Door (RK-GDxx) and the Rear Access
Panel (RK-RAPx) are not being used,
the front and rear rackrail can be installed
in any one of the three mounting locations.
- If the Door (RK-GDxx) and the Rear Access
Panel (RK-RAPx) are being used,
the front rackrail must be installed in
location two and the rear rackrail must be
installed in location three.
When moving the front rackrail to the
setback position, relocate and mount
the rail on the opposite side of the
panel to obscure the 1st set of
mounting holes.
FRONT
IF YOU ARE USING THE REAR RAIL OPTION, INSTALL NOW
TIP:
Page 6
OPTIONS
Smoked tempered glass door secures components and enhances appearance, part # RK-GDxx.
Rear rackrail (RK-RRxx) for equipment support and cable management.
Casters create a portable rack that locks in place, part # RKW.
LOCK
LOCKING CASTERS NON-LOCKING CASTERS
SMOKED, TEMPERED
GLASS DOOR, RK-GDxx
REAR RACKRAIL
Page 7
OPTIONS
Quick-Position™ Shelf mounts without rack screws and accepts rear
mounting of power strip, part # SH-BRK.
NOTE: Shelves can be used with or without rackrail installed.
NOTE: Rear Access Pan cannot be used if installing a power strip to the shelf.
Locking/latching panel, tips out for easy access. Provides cable entry and security, part # RK-RAPxx.
100 CFM DC Fan Kit. Mounts in the top of the Rear Access Panel, part # DCFANKIT-4.
SH-BRK
REAR VIEW
LOCKING/LATCHING PANEL
CABLE MANAGEMENT PANEL
VENTED TOP PANEL
PD-815SC-NS POWER
STRIP SHOWN (When mounting
power strip to shelf, optional
rear rackrail must be in setback
position).
Page 8 30% Recycled Paper
WARRANTY
Middle Atlantic Products (the "Company") warrants the MBRK/OBRK Series to be free from defects in
material or workmanship under normal use and conditions for a period of (7) years from date of
shipment by the Company.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and
exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of
and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products
purchased, or any part or parts thereof, which the Company has determined to be defective after
inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this
warranty does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE
PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY)
HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS
PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax 973-839-1976
International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice 613-836-2501 - Fax 613-836-2690
middleatlantic.ca - customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.