Table of Contents
Middle Atlantic Products PPM-LID12 User Manual
Displayed below is the user manual for PPM-LID12 by Middle Atlantic Products which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
I-2213 Rev G
PPM Series
Cover and Door Assembly
Instruction Sheet
SHIPPING BRACE.
REMOVE & DISCARD.
ROTATE TO CLOSED POSITION
PRIOR TO CLOSING COVER.
2) Position
the tabs in the Door
into the Slots in
the Cover.
3) Rotate the
door downward
lifting slightly to
engage the heads
of the screws.
IMPORTANT NOTE:
- The use of the door requires the
substitution of the Wing Nuts with
the Flange Nuts. (Supplied)
- Please remove the Wing Nuts and replace
with the Flange Nuts before attempting
to install the door.
- If supplied with Hex Drive Screws, replace with
Torx Post Pan Head Screws provided with the door.
Driver Bit provided.
DOOR SECURES
WITH SCREWS.
4) Tighten screws
to secure door.
NUT GETS HIDDEN
BY OPTIONAL DOOR
FOR SECURITY.
1) Install the cover and rotate to the closed
position, engaging studs in rack rail.
Page 2
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and
exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return
of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the
products purchased, or any part or parts thereof, which the Company has determined to be
defective after inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this
warranty does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE
PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY)
HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS
PAID TO THE COMPANY.
USA: NJ - CA - IL Canada: ON - BC
WARRANTY
Corporate Headquarters
Middle Atlantic Canada
Factory Distribution
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
30% Recycled Paper
Corporate Voice 973-839-1011 - Fax 973-839-1976
International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Voice 613-836-2501 - Fax 613-836-2690
middleatlantic.ca - customerservicecanada@middleatlantic.ca
Middle Atlantic Products (the "Company") warrants the PPM SERIES Cover and Door Assembly
to be free from defects in material or workmanship under normal use and conditions for the lifetime
of the product.