Middle Atlantic Products RK-RAP16 User Manual
Displayed below is the user manual for RK-RAP16 by Middle Atlantic Products which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
I-00275 Rev A
MBRK/BRK Series
RK-RAPx REAR ACCESS PANEL
Instruction Sheet
REAR ACCESS PANEL
(RK-RAPx)
TOOLS REQUIRED
PARTS
Top Panel
(1)
Rear Access Panel
(1)
#2 Phillips screwdriver
Cable Management Bottom Panel
(1)
2 Space RackRail
(4)
#10-32 Pan Head Screw
(12)
#10 X 5/8” Wood Screw
(6)
INSTALLATION
NOTE: Full height rear rackrail should be installed
in setback position 3. (FIGURE A)
REAR FIGURE A FRONT
1 2 3
1) Align 2 space rackrail with side panel pilot holes at rear
of rack and install with the #10 X 5/8" wood screws
provided, 4 places. (FIGURE B)
REAR
#10 X 5/8 WOOD SCREW
2 SPACE RAIL
(4 PLACES)
FIGURE B
Page 2
Page 3
3) Install the Top Panel and the Cable Management Bottom Panel to the 2 space rackrails
(top and bottom) with the #10-32 pan head screws provided. (See FIGURE C)
INSTALLATION (Continued)
2 SPACE RACKRAIL
TOP PANEL
FIGURE C
REAR
CABLE MANAGEMENT
BOTTOM PANEL
#10-32 PAN HEAD
SCREW (4 PLACES)
2 SPACE RACKRAIL
#10-32 PAN HEAD
SCREW
(4 PLACES)
Page 4
INSTALLATION (Continued)
TOP PANEL
KEY LATCH
REAR ACCESS PANEL
CABLE MANAGEMENT
BOTTOM PANEL
4) Install the Rear Access Panel by setting bottom of panel onto
Cable Management Bottom Panel flange and tilting top end towards
the Top Panel. (FIGURE D)
NOTE: Keys are provided for the Rear
Access Panel key latch
FIGURE D
NOTE: Fan kit available, part #
DCFANKIT-4
WARRANTY
Middle Atlantic Products (the "Company") warrants the Rear Access Panel (RK-RAPx) to be free from defects in material or workmanship
under normal use and conditions for the lifetime of the product.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty
shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the
Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after
inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by parties other than the Company, or
any modification or alteration of the products. In addition, this warranty does not cover damage due to improper handling, assembly,
installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF
THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO
EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax 973-839-1976 / International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice 613-836-2501 - Fax 613-836-2690 / middleatlantic.ca - customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
30% Recycled Paper