Middle Atlantic Products UD1 User Manual
Displayed below is the user manual for UD1 by Middle Atlantic Products which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
I-00333 Page 1 Rev -
UD1
ONE RACKSPACE DRAWER
Instruction Sheet
THANK YOU
Thank you for purchasing the UD1 one rackspace drawer. Please read these instructions
thoroughly before installing/assembling this product.
PRODUCT FEATURES
- Reversible design allows the drawer to be flipped over for use as a slide-out shelf for the
the following applications: writing surface, laptop and keyboard holder.
- Cable knockout at rear of drawer allows for efficient routing of cabling.
SUPPLIED HARDWARE
(2) 10-32 Wing nuts
(4) 6-32 X .25 Self threading screws
(2) 10-32 X .5 Pan head machine screws
(4) #10 X .625 Pan head wood screws
(2) Side mounting brackets (For wood installation)
(2) Rear mount brackets (For use with
Rackrail)
INSTALLATION WITH REAR MOUNTING BRACKETS (USE WITH REAR RAIL)
1) Position drawer in rack before attaching rear mounting brackets.
2) With drawer positioned in the rack, attach the supplied rear mounting brackets to each side as shown
using the supplied hardware. (FIGURE A)
3) Install drawer to the front and rear rackrails
as shown. (FIGURE B)
REAR MOUNTING
BRACKET
WING NUT
PAN HEAD
MACHINE
SCREW
FIGURE A
REAR MOUNTING
BRACKET
FIGURE B
RACKRAIL
SCREW
(sold separately)
Page 2
NOTE: Drawer weight capacity is 50 pounds.
15.5" - 20.5"
INSTALLATION WITH SIDE MOUNTING BRACKETS (USE WITH WOOD RACKS/CASES)
1) Attach the drawer to the front rackrail before attaching the side mounting brackets
2) Attach the side mounting brackets to the drawer and then attach to the sides of the rack
as shown using the supplied hardware. (FIGURE C)
CONVERTING FROM DRAWER TO SHELF AFTER INSTALLATION
1) Open the drawer and simultaneously push the right side quick release latch down and the left side
latch up, and slide the drawer out from the tracks. (FIGURE D)
2) Flip the drawer over and insert onto the tracks. Close the shelf to lock it on the tracks.
QUICK RELEASE LATCH
(BOTH SIDES)
NOTE: The above steps are the same for converting from shelf to drawer.
SIDE MOUNTING
BRACKET
FRONT MOUNTING
BRACKET
PAN HEAD
WOOD SCREW
FIGURE C
FIGURE D
ATTACH TO FRONT
RACKRAIL
Page 3
SELF THREADING
SCREW (DO NOT
OVERTIGHTEN)
SIDE MOUNTING
BRACKET
WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the UD1 One Rackspace Drawer to be free from
defects in material or workmanship under normal use and conditions for a period of (3) three years from
date of shipment by the Company.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and
exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return
of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products
purchased, or any part or parts thereof, which the Company has determined to be defective after
defective after inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this
warranty does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE
COMPANY BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING
OUT OF THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR
ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE
OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax 973-839-1976
International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice 613-836-2501 - Fax 613-836-2690
middleatlantic.ca - contactcanada@middleatlantic.com
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 Registered Company.
30% Recycled Paper
Page 4