Morphy Richards 303124 User Manual
Displayed below is the user manual for 303124 by Morphy Richards which is a product in the Irons category. This manual has pages.
Related Manuals
RN303100MUK Rev1
* Register online for your 3 year guarantee. See the back of this instruction book for details. (UK and Ireland customers only)
Steam Iron
www.morphyrichards.co.uk/blog
For competitions, product hints and tips
and more join us at www.facebook.com/morphyrichardsuk
@loveyourmorphy
IMPORTANT: To prevent limescale problems which would not be
covered by the guarantee, we recommend the use of distilled or
demineralised water (available from most large supermarkets).
Please read and keep these instructions for future use
RN303100MUK Rev1.qxp_Instruction Booklet 03/12/2015 13:15 Page 1
2
Important safety instructions
•
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience or knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Cleaning and user maintenance shall not
be made by children without supervision.
•
Children shall not play with the appliance.
•Keep the iron and its cord out of reach of children
less than 8 years of age at all times.
•The iron must not be left unattended while it is
connected to the supply mains.
•The plug must be removed from the socket before
filling the iron with water.
•The iron must be used and rested on a stable
surface.
•When placing the iron on its heel, ensure that the
surface on which the heel is placed is stable.
•The iron is not to be used if it has been dropped, if
there are visible signs of damage or it is leaking.
•The filling aperture must not be opened during use.
•
CAUTION - HOT: Burns can occur from
touching hot parts, hot water or steam.
•WARNING: To avoid electric shock, do not
immerse the appliance in water / liquid.
•WARNING: Misuse of the appliance could cause
personal injury.
Electrical requirements and mains cable
•Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating current).
•Do not operate with a damaged supply cord or
grommet, it must be replaced by the manufacturer,
its service agent or similarly qualified person in order
to avoid a hazard.
•Do not let the mains lead come into contact with the
hot soleplate of the iron.
•Should the fuse in the mains plug require changing,
a 13 amp BS1362 fuse must be fitted.
•WARNING: This appliance must be earthed.
PLEASE READ ALL INSTRUCTIONS AND KEEP
FOR REFERENCE
RN303100MUK Rev1.qxp_Instruction Booklet 03/12/2015 13:15 Page 2
3
(1) Variable steam switch
(2) Water spray button
(3) Steam boost trigger
(4) Auto shut-off indicator
(certain models only)
(5) Self clean position
(6) Filling hole with cap
(7) Spray nozzle
(8) Soleplate
(9a) Temperature dial with
illuminated temperature
indication
(certain models only)
(9b) Electronic temperature
control panel with
illuminated temperature
indication
(certain models only)
(10) Water tank
(11) Iron heel
(12) Filling beaker
(certain models only)
Steam iron overview
Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International
Textile Care Labelling Code
Temperature guide
Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot MAX setting
Control dial
positions
Do not iron • •• •••
Fabric Nylon, Acetates,
synthetic fabrics
Wool, Polyester
mixtures
Cotton, Linen
Rayon, Rayon
mixtures
Linen
Ironing Iron on wrong side,
if moisture
required, use
damp cloth
(not Acetate)
Fabrics requiring
this setting usually
require steam
pressing.
Steam level setting
(see step 4 of
‘Using the iron for
steam ironing’ on
page 4)
Low Medium High
With water in tank
Without water in tank
Steam/shot of steam
Dry and spray
Dry ironing
11
9a
7
8
4
6
3
10
9b
12
1 2
5
No steam (see ‘Dry
ironing’ on page 5)
RN303100MUK Rev1.qxp_Instruction Booklet 03/12/2015 13:15 Page 3
4
4
Vary the steam output using the variable steam
switch (1), as shown above.
Plug in the iron and switch on at the mains.
Set the temperature dial (9a) (certain models only)
to the temperature required (see ‘Temperature
Guide’ on page 3).
The temperature illumination in the dial will
illuminate until the required temperature is
reached, then it will turn off.
Tip: We recommend the temperature indicator
light is allowed to illuminate and extinguish twice
for the temperature to stabilise before you begin
ironing.
The temperature indicator light will switch on and
off whilst you are ironing, as the iron regulates the
temperature.
Tip: Begin with cool fabrics and work up to higher
settings. An iron heats up quicker than it cools
down so this will save you time and energy.
2
Temperature dial model
Make sure the iron is not plugged in. Set the
variable steam switch (1) to ‘O’. Fill the water
tank (10) via the filling hole (6). Fill with the iron
in a horizontal position to the MAX graphic on
the side of the water tank.
IN HARD WATER AREAS, WE RECOMMEND
THE USE OF DISTILLED OR DEMINERALISED
WATER.
Never use battery topping up fluid or water
containing any substances like starch, sugar,
fragrant additives or defrosted water from a
refrigerator.
NOTE: Please see point 2 of ‘Exclusions’ on
page 8.
1
Using the iron for steam ironing
Remove the protective cover from the soleplate (8).
Set the electronic temperature control panel (9b)
(certain models only) to the temperature required
(see ‘Temperature Guide’ on page 3).
The iron will default to (cotton) when the iron is
plugged in. Press the ‘SELECT’ button to toggle
the temperature:
one press for MAX setting (linen);
two presses for setting (nylon/silk);
three presses for setting (wool/polyester);
four presses for setting (cotton).
The appropriate light flashes until the temperature
is reached, and then the iron beeps.
For further information, see tips in step 2, above.
Electronic temperature control model 3
Only use the steam function
on heavy fabrics and when the
temperature dial (9a) (certain
models only) is set within the
shaded area,
or the or or MAX setting
is selected on the electronic
temperature control panel (9b)
(certain models only).
Before use
RN303100MUK Rev1.qxp_Instruction Booklet 03/12/2015 13:15 Page 4
5
For stubborn creases, use the water spray
button (2).
If using for the first time, you may need to press
this a few times to prime the pump.
5
2
Dry ironing
Your iron can be used for dry ironing. Set the
variable steam switch
(1)
to ‘O’ and set the
temperature as desired (see ‘Temperature Guide’
on page 3).
You won’t need water in the tank unless using
the water spray or steam boost features
.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, etc. Hold the iron
between 1cm and 2cm away from the item and
press the steam boost trigger
(3).
Anti-drip system (certain models only)
This prevents water escaping from the soleplate
(8)
when the iron is too cold.
During use, the anti-drip system may emit a loud
click, particularly during heat-up or whilst cooling
down. This is perfectly normal and indicates that
the system is functioning correctly
.
Anti-scale system (certain models only)
This system reduces scale deposits and helps
prolong the life of the iron
.
Auto shut-off (certain models only)
The iron will automatically shut down if stationary
in the horizontal position for 1 minute, or in the
vertical position for 8 minutes.
When auto shut-off is activated, a beep will be
heard and the indicator light
(4)
will flash.
Gently move the iron and it will reheat. Wait for
the iron to heat-up and continue ironing
.
Features of your iron
3
6
3
Steam boost
Press the steam boost trigger
(3)
for an extra
steam burst for stubborn creases / heavy fabrics.
NOTE: If you need to use the steam boost whilst
dry ironing, check the temperature is set within
the steam range (see step 4, on page 4).
NOTE: For optimum steam quality, do not
operate the shot more than three times in
succession
.
Using the iron for steam ironing (continued)
4
RN303100MUK Rev1.qxp_Instruction Booklet 03/12/2015 13:15 Page 5
6
To clean a coated soleplate
Do not use scouring powder or solution as this
could cause damage to the coating.
If any man-made fibres fuse to the soleplate (8),
set the iron at the MAX position and pass it over a
clean piece of cotton to draw the deposit off the
surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp
cloth and mild detergent, then wipe dry.
When you have finished ironing, unplug and
empty all water from your iron and set the steam
switch at the ‘O’ position. When cool, store the
iron on its heel with the cord wrapped loosely
around the heel.
NOTE: Please see point 3 of ‘Exclusions’ on page 8.
Y
our iron has a built in cleaning system designed
to keep the water valve, steam chamber and
steam vents clear of lint and loose mineral
deposits.
1Half fill the iron with water.
2Place the iron on its heel
(11)
.
3Move the variable steam switch
(1)
to the ‘
O’
position.
4Connect to a mains supply outlet.
5Set the temperature to ‘MAX’.
6
Leave the iron switched on, rested on its heel (11)
until the temperature indicator light goes out.
WARNING: Keep hands and body away from
the hot soleplate.
7Disconnect the iron from the mains supply outlet.
8Whilst the iron is still very hot, hold the iron
horizontally over a sink.
CAUTION: The soleplate will still be hot, so
ensure the power cord and plug are kept away
from it and the sink.
9
Push the variable steam switch
(1)
fully to the left
and hold in the self clean position
(5)
.
WARNING: Steam and boiling hot water will
drain from the holes in the soleplate. Keep
hands and body away from the hot water. This
washes away the scale and minerals that have
built up inside the steam chamber.
10
Whilst still holding the variable steam switch
(1)
in
the self clean position
(5)
, gently move the iron
back and forth until the water tank is empty.
11
When cleaning is complete, move the variable
steam switch back to the ‘O’ position.
12
Rest your steam iron back on its heel and allow to
fully cool down.
13
Wipe the soleplate
(8)
with a cold, damp cloth.
After this cleaning operation, empty out any
remaining water.
IMPORTANT: Do not attempt to descale the
soleplate with descaling products.
Maintenance
Emptying and storing
Self clean
RN303100MUK Rev1.qxp_Instruction Booklet 03/12/2015 13:15 Page 6
7
Notes
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from. Please have the product name, model
number and serial number to hand when you call
to help us deal with your enquiry quicker.
UK Helpline: 0344 871 0944
IRE Helpline: 1800 409 119
Spares: 0344 873 0710
Talk to us
If you have any questions or comments, or want
some great tips to help you get the most out of
your products, join us online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
Twitter: @loveyourmorphy
Website: www.morphyrichards.com
Contact us
RN303100MUK Rev1.qxp_Instruction Booklet 03/12/2015 13:15 Page 7
RN303100MUK Rev1 12/15
The After Sales Division
Morphy Richards Ltd
Mexborough,
South Yorkshire,
England, S64 8AJ
Your standard 1 year guarantee is extended for an
additional 2 years when you register the product within 28
days of purchase with Morphy Richards. If you do not
register the product with Morphy Richards within 28 days,
your product is guaranteed for 1 year. To validate your 3
year guarantee register with us online at
www.morphyrichards.co.uk
Or call our customer registration line, quoting model and
serial number, these numbers can be found on the base of
the product.
UK 0344 871 0242
IRE 1800 409 119
N.B. Each qualifying product needs to be registered with
Morphy Richards individually.
Please note that the 3 year guarantee is only available in
the UK and Ireland. Please refer to the 1 year guarantee
for more information.
It is important to retain the retailer’s receipt as proof of
purchase. Staple your receipt to this back cover for future
reference.
Please quote the following information if the product
develops a fault. These numbers can be found on the base
of the product.
Model no.
Serial no.
All Morphy Richards products are individually tested before
leaving the factory. In the unlikely event of any appliance
proving to be faulty within 28 days of purchase, it should
be returned to the place of purchase for it to be replaced.
If the fault develops after 28 days and within 12 months of
original purchase, you should contact the Helpline number
quoting Model number and Serial number on the product,
or write to Morphy Richards at the address shown.
You may be asked to return a copy of proof of purchase.
Subject to the exclusions set out below (see Exclusions),
the faulty appliance will then be repaired or replaced as
appropriate and dispatched usually within 7 working days
of receipt.
If, for any reason, this item is replaced or repaired during
the 1 year guarantee period, the guarantee on the new
item will be calculated from original purchase date.
Therefore it is vital to retain your original till receipt or
invoice to indicate the date of initial purchase.
To qualify for the 1 year guarantee, the appliance must
have been used according to the instructions supplied.
For example, water should be emptied after each use.
Morphy Richards shall not be liable to replace or repair the
goods under the terms of the guarantee where:
1The fault has been caused or is attributable to accidental
use, misuse, negligent use or used contrary to the
manufacturer’s recommendations or where the fault has
been caused by power surges or damage caused in
transit.
2The fault is caused by limescale build-up.
3The cables are damaged due to wrapping too tightly or
excessive kinking.
4The appliance has been used on a voltage supply other
than that stamped on the products.
5Repairs have been attempted by persons other than our
service staff (or authorised dealer).
6The appliance has been used for hire purposes or non
domestic use.
7The appliance is second hand.
8Morphy Richards reserves the right not to carry out any
type of servicing under the guarantee at its discretion.
•This guarantee does not confer any rights other than those
expressly set out above and does not cover any claims for
consequential loss or damage. This guarantee is offered
as an additional benefit and does not affect your statutory
rights as a consumer. Morphy Richards products are
intended for household use only. See usage limitations
within the location safety instructions.
Morphy Richards has a policy of continuous improvement
in product quality and design. The company, therefore
reserves the right to change the specification of
its models at any time.
For electrical products sold within the
European Community. At the end of the
electrical products useful life, it should not be
disposed of with household waste.
Please recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice in your country
Exclusions
Registering your 3 year
guarantee
Your 1 year guarantee
Disclaimer
IF YOU ARE HAVING A PROBLEM
WITH ONE OF OUR PRODUCTS,
CALL OUR HELPLINE:
UK: 0344 871 0944
EIRE: 1800 409 119
SPARES: 0344 873 0710
RN303100MUK Rev1.qxp_Instruction Booklet 03/12/2015 13:15 Page 8