Morphy Richards 303250 User Manual
Displayed below is the user manual for 303250 by Morphy Richards which is a product in the Irons category. This manual has pages.
Related Manuals
RN303250MUK Rev1
* Register at www.morphyrichards.co.uk/support
UK and Ireland customers only
Please read and keep these instructions for future use
If you experience any problems with this iron, do not return to the store.
Please contact our help line who will be happy to help:
We do stock spare filler lids for this iron, so if you need a replacement please call 0344 873 0710.
UK: 0344 871 0944 IRE: 1800 409 119
Register your guarantee online: www.morphyrichards.co.uk/support
We'll keep you updated with special offers, competitions and important product information.
Cordless Steam Iron
IMPORTANT: To reduce limescale damage, we recommend the use of distilled,
deionised or demineralised water. This is particularly important if you live in a hard
water area.
Never use battery topping up fluid or water containing any substances like starch,
sugar, fragrant additives or defrosted water from a refrigerator.
Failure to maintain your iron will invalidate your guarantee.
RN303250MUK Rev1.qxp_Instruction Booklet 31/01/2019 10:54 Page 1
2
Important safety instructions
•
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience or knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the
hazards involved.
•
Children shall not play with the appliance.
•WARNING: Misuse of the applaince could cause
personal injury.
•
Cleaning and user maintenance shall not be made
by children without supervision.
•Keep the iron and its cord out of reach of children
less than 8 years of age at all times.
•The iron must not be left unattended while it is
connected to the supply mains.
•The plug must be removed from the socket before
filling the iron with water.
•The iron must only be used with the stand provided.
•The iron must be used and rested on a stable
surface.
•When placing the iron on its heel or stand, ensure
that the surface on which the heel or stand is
placed is stable.
•The iron is not to be used if it has been dropped, if
there are visible signs of damage or it is leaking.
•The filling aperture must not be opened during use.
•
CAUTION - HOT: Burns can occur from
touching hot parts, hot water or steam.
•WARNING: To avoid electric shock, do not
immerse appliance in water / liquid.
Electrical requirements and mains cable
•Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating current).
•Do not operate with a damaged supply cord or
grommet, it must be replaced by the manufacturer,
its service agent or similarly qualified person in order
to avoid a hazard.
•Do not let the mains lead come into contact with the
hot soleplate of the iron.
•Should the fuse in the mains plug require changing,
a 13 amp BS1362 fuse must be fitted.
•WARNING: This appliance must be earthed.
PLEASE READ ALL INSTRUCTIONS AND KEEP
FOR REFERENCE
RN303250MUK Rev1.qxp_Instruction Booklet 31/01/2019 10:54 Page 2
3
(1) Water spray button
(2) Steam boost button
(3) Power indicator light
(4) Temperature indicator light
(5) Iron heel
(6) Heel connector
(7) Steam switch
(8) Charging base power light
(9) Charging base connector
(10) Charging base
(11) Power cord
(12) Spray nozzle
(13) Filling hole with cap
(14) Soleplate
(15) Self clean button
(16) Temperature dial
(17) Water tank
Steam iron overview
Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International
Textile Care Labelling Code
Temperature guide
Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot MAX setting
Control dial
positions
Do not iron • •• •••
Fabric Nylon, Acetates,
synthetic fabrics
Wool, Polyester
mixtures
Cotton, Linen
Rayon, Rayon
mixtures
Ironing Iron on wrong side,
if moisture
required, use
damp cloth
(not Acetate)
Fabrics requiring
this setting usually
require steam
pressing.
With water in tank
Without water in tank
Steam/spray/shot of steam
Dry and spray
Dry ironing
35
1 2
9 11
12 13 15 1614
7
2 1
157
3
6
108
17
4
4
RN303250MUK Rev1.qxp_Instruction Booklet 31/01/2019 10:54 Page 3
4
1
Using the iron
1) Filling the tank
Before first use, remove all packaging, including the protective cover on the soleplate. Make sure the iron
is not plugged in. Set the steam switch (7) to off. Fill the water tank (17) via the filling hole (13). To fill the
tank with the maximum amount of water, we recommend the iron is tilted vertically whilst being filled.
WE RECOMMEND THE USE OF DISTILLED, DEIONISED OR DEMINERALISED WATER.
Never use battery topping up fluid or water containing any substances like starch, sugar, fragrant
additives or defrosted water from a refrigerator.
NOTE: Please see point 2 of ‘Exclusions’ on page 8.
Plug in the charging base (10) and switch on at
the mains. The charging base power light (8) will
illuminate.
Rest the iron on its heel (5) on the charging base,
ensuring that the heel connector (6) meets the
charging base connector (9). Connection is made
when the
power indicator light (3)
on the handle
illuminates
.
Wait until the iron reaches the desired
temperature (see step 3), then commence ironing.
Throughout your ironing session, the iron
must be replaced onto the charging base
every few seconds or whenever you adjust
your garments, to keep the heat topped up.
Set the temperature dial (16) to the temperature
required (see ‘Temperature Guide’ on page 3).
The temperature indicator light (4) will
illuminate red until the required temperature is
reached, then it will turn green.
NOTE: It is normal for the temperature indicator
light to flicker between red and green whilst the
temperature cycles up and down during charging.
Tip: We recommend the temperature indicator
light is allowed to cycle red and green twice
before you begin ironing.
The temperature indicator light and the power
indicator light will switch on and off whilst you are
ironing and replacing the iron on the base.
Tip: Begin with cool fabrics and work up to higher
settings. An iron heats up quicker than it cools
down so this will save you time and energy.
If required, switch on the steam using the steam
switch (7).
The amount of steam is automatically adjusted
to suit the temperature selected.
For stubborn creases, use the water spray
button (1).
If using for the first time, you may need to press
this a few times to pull the water through.
2) Charging base 3) Temperature Selection
4) Switching on the steam 5) Using the water spray
RN303250MUK Rev1.qxp_Instruction Booklet 31/01/2019 10:54 Page 4
Dry ironing
Your iron can be used for dry ironing. Set the
steam switch
(7)
to off and set the temperature
dial
(16)
as desired (see page 3).
You won’t need water in the tank unless using
the water spray or steam boost features
.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, etc. Hold the iron
between 1cm and 2cm away from the item and
press the steam boost button
(2).
Anti-drip system
This prevents water escaping from the soleplate
(14)
when the iron is too cold.
During use, the anti-drip system may emit a loud
click, particularly during heat-up or whilst cooling
down. This is perfectly normal and indicates that
the system is functioning correctly
.
Anti-scale system
This system reduces scale deposits and helps
prolong the life of the iron
.
Auto shut-off
If the iron is not taken off the charging base (10)
for 8 minutes, the product will automatically turn
off for safety and to save energy. When this
happens, the power indicator light (3) will flash.
To restart the iron, disconnect the iron from the
charging base and replace, then wait for the
temperature to rise again.
NOTE: The appliance is not turned off completely
in auto shut-off mode. To switch the product off,
unplug the product from the mains outlet.
5
2
Features of your iron
2
6) Steam boost
Press the steam boost button
(2)
for an extra
steam burst for stubborn creases / heavy fabrics.
NOTE: For optimum steam quality, do not operate
the shot more than three times in succession
.
Using the iron for steam ironing (continued)
3
RN303250MUK Rev1.qxp_Instruction Booklet 31/01/2019 10:54 Page 5
6
Emptying and storing
When you have finished ironing, unplug and
empty all water from your iron and set the steam
switch at the off position. When cool, store the
iron on its heel
(5)
on the charging base
(10)
with
the power cord
(11)
wrapped loosely around the
iron’s heel.
NOTE: Please see point 4 of ‘Exclusions’ on page 8.
Cleaning the soleplate
Do not use scouring powder or solution as this
could cause damage to the coating.
If any man-made fibres fuse to the soleplate (14),
set the iron at the MAX position and pass it over
a clean piece of cotton to draw the deposit off
the surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp
cloth and mild detergent, then wipe dry.
Removing limescale
Y
our iron has a built in self clean system
designed to keep the water valve, steam
chamber and steam vents clear of lint and
loose mineral deposits.
1Fill the iron with water to the MAX line.
2Set the steam switch
(7)
to the OFF position.
3Connect
the charging base
(10)
to a mains
supply outlet and rest the iron on its heel
(5)
on
the charging base.
4Set the temperature dial to the MAX setting and
wait for the temperature to be reached -
the
temperature indicator light (4) will illuminate red
until the required temperature is reached, then it
will turn green.
5Whilst the iron is still very hot, hold the iron
horizontally over a sink.
CAUTION: The soleplate
(14)
will still be hot, so
ensure the charging base
(10)
and plug are kept
away from it and the sink.
6Press and hold the self-clean button
(15)
.
WARNING: Steam and boiling hot water will
drain from the holes in the soleplate. Keep
hands and body away from the hot water. This
washes away the scale and minerals that have
built up inside the steam chamber.
7
Whilst still holding the self-clean button, gently
move the iron back and forth until the water tank
(17)
is empty.
8
When steam and hot water cease to be released
from the soleplate
(14)
, release the self-clean
button
(15)
.
9
When the process is complete, re-connect the
iron heel
(5)
to
the charging base
(10)
and allow
to heat up - this will dry the soleplate.
10 Disconnect the
charging base
(10)
from the
mains supply outlet.
11
With the iron resting on its heel
(5)
, allow it to
fully cool down.
12
Wipe the soleplate with a cold, damp cloth.
After this cleaning operation, empty out any
remaining water.
IMPORTANT: Do not attempt to descale the
soleplate with descaling products.
Maintaining your iron
RN303250MUK Rev1.qxp_Instruction Booklet 31/01/2019 10:54 Page 6
7
Troubleshooting
•No power or not heating up. 1.Check the fuse and the fuse rating (should be
13amp).
2.T
ry a different appliance in the socket as it may be
the socket that is at fault.
3.Check the temperature dial has not been set to
MIN.
4. Ensure good connection between the iron and the
charging base.
•Overheating or not getting hot enough. 1. Adjust the temperature dial to ensure the setting
matches that recommended on the garment or
refer to the “temperature guide” section.
2. Allow the iron to reach temperature and stabilise
for 1-2 minutes if it has just been plugged in.
3. Return the iron onto the charging base every few
seconds to top up the heat.
•Not steaming or poor steam. 1. Check that there is enough water in the tank.
2. Allow the iron to reach temperature before using
steam.
3. Perform a self-clean to clear away limescale
inside the iron (refer to “Self Clean” section).
•Dripping from the holes in the soleplate. 1. Allow the iron to reach temperature before using
steam.
2. Return the iron onto the charging base every few
seconds to top up the heat.
•Tripping Electrics. 1. Try using a different socket.
2. Ensure there are no other appliances being used
on the same set of sockets as the iron.
•The filler cap is broken or does not close properly. 1. Call our helpline to order a new replacement filler
cap to be sent out.
Problem Solution
RN303250MUK Rev1.qxp_Instruction Booklet 31/01/2019 10:54 Page 7
RN303250MUK Rev1 01/19
Your standard 1 year guarantee is extended for an
additional 2 years when you register the product within 28
days of purchase with Morphy Richards. If you do not
register the product with Morphy Richards within 28 days,
your product is guaranteed for 1 year. To validate your 3
year guarantee register with us online at
www.morphyrichards.co.uk/support
Or call our customer registration line
UK 0344 871 0242
IRE 1800 409 119
N.B. Each qualifying product needs to be registered with
Morphy Richards individually.
Please note that the 3 year guarantee is only available in
the UK and Ireland. Please refer to the 1 year guarantee
for more information.
It is important to retain the retailer’s receipt as proof of
purchase. Staple your receipt to this back cover for future
reference.
Please quote the following information if the product
develops a fault. These numbers can be found on the base
of the product.
Model no. Serial no.
All Morphy Richards products are individually tested before
leaving the factory. In the unlikely event of any appliance
proving to be faulty within 28 days of purchase, it should
be returned to the place of purchase for it to be replaced.
If the fault develops after 28 days and within 12 months of
original purchase, you should contact the Helpline number
quoting Model number and Serial number on the product,
or write to Morphy Richards at the address shown.
You may be asked to return a copy of proof of purchase.
Subject to the exclusions (see Exclusions), the faulty
appliance will then be repaired or replaced as appropriate
and dispatched usually within 7 working days of receipt.
If, for any reason, this item is replaced or repaired during
the 1 year guarantee period, the guarantee on the new
item will be calculated from original purchase date.
Therefore it is vital to retain your original till receipt or
invoice to indicate the date of initial purchase.
To qualify for the 1 year guarantee, the appliance must
have been used according to the instructions supplied.
Morphy Richards shall not be liable to replace or repair the
goods under the terms of the guarantee where:
1The fault has been caused or is attributable to accidental
use, misuse, negligent use or used contrary to the
manufacturer’s recommendations or where the fault has
been caused by power surges or damage caused in
transit.
2The fault has been caused by using water other than that
recommended by Morphy Richards.
3The fault is caused by limescale build-up.
4The cables are damaged due to wrapping too tightly or
excessive kinking.
5The appliance has been used on a voltage supply other
than that stamped on the products.
6Repairs have been attempted by persons other than our
service staff (or authorised dealer).
7The appliance has been used for hire purposes or non
domestic use.
8The appliance is second hand.
9Morphy Richards reserves the right not to carry out any
type of servicing under the guarantee at its discretion.
•This guarantee does not confer any rights other than those
expressly set out above and does not cover any claims for
consequential loss or damage. This guarantee is offered
as an additional benefit and does not affect your statutory
rights as a consumer. Morphy Richards products are
intended for household use only. See usage limitations
within the location safety instructions.
Morphy Richards has a policy of continuous improvement
in product quality and design. The company, therefore
reserves the right to change the specification of
its models at any time.
For electrical products sold within the
European Community. At the end of the
electrical products useful life, it should not be
disposed of with household waste.
Please recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice in your country.
Exclusions
Your 1 year guarantee
Disclaimer
Registering your guarantee
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from. Please have the product name, model
number and serial number to hand when you call
to help us deal with your enquiry quicker.
UK Helpline: 0344 871 0944
IRE Helpline: 1800 409 119
Spares: 0344 873 0710
Talk to us
If you have any questions or comments, or want
some great tips to help you get the most out of
your products, join us online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
Twitter: @loveyourmorphy
Website: www.morphyrichards.com
Address:
The After Sales Division
Morphy Richards Ltd
Mexborough,
South Yorkshire,
England, S64 8AJ
Contact us
RN303250MUK Rev1.qxp_Instruction Booklet 31/01/2019 10:54 Page 8