Morphy Richards 333300 User Manual

Displayed below is the user manual for 333300 by Morphy Richards which is a product in the Steam Ironing Stations category. This manual has pages.

Related Manuals

Morphy Richards 48780 Manual

Morphy Richards 43970 Manual

Morphy Richards Accents Brushed Manual

Morphy Richards 47580 Manual

Morphy Richards 48992 Manual

Morphy Richards 48988 Manual

Morphy Richards Retro Accents Manual

Steam Generator with

Purchase spare anti-scale cartridges to keep your product performing like

new for longer. Available by calling our Spares Helpline on 0344 873 0710.

RN333300 MUK Rev3

* Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)

Please read and keep these instructions for future use

IMPORTANT: To reduce limescale problems which would not be covered by the

guarantee, we recommend the use of a mix of 50% tap water and 50% distilled,

deionised or demineralised water (available from most large supermarkets).

Never use battery topping up fluid or water containing any substances like

starch, sugar, fragrant additives or defrosted water from a refrigerator.

Remember to clean your steam generator and change the antiscale cartridge.

Failure to adhere to the above guidelines will invalidate your guarantee.

IF YOU HAVE ANY DIFFICULTY WITH THIS PRODUCT,

INSTEAD OF TAKING IT BACK TO THE RETAILER, TRY:

1. The instruction booklet 2. Refer to www.morphyrichards.com

3. Or call our helpline: UK: 0344 871 0944, EIRE: 1800 409 119 (For UK & Eire customers only)

We'll keep you updated with special offers, competitions and important product information.

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 1

The use of any electrical appliance requires the following common sense safety rules.

Please read these instructions carefully before using the product.

Important safety instructions

•WARNING: Disconnect from the mains supply

before carrying out any routine maintenance.

•This appliance can be used by persons with reduced

physical, sensory or mental capabilities, or lack of

experience and knowledge, if they have been given

supervision or instruction concerning the use of the

appliance in a safe way and understand the hazards

involved.

•Children shall not play with the appliance.

•Keep the appliance out of reach of children when it is

energized or cooling down.

•The steam generator must not be left unattended

while it is connected to the supply mains.

•The steam generator must be used and rested on

a stable surface.

•When placing the iron on the steam generator base

or on its heel, ensure that the surface on which the

heel or base is placed is stable.

•The steam generator is not to be used if it has been

dropped, if there are visible signs of damage or it

is leaking.

•The filling aperture may be opened during use, due

to the design of the system.

•Do not operate with a damaged steam/supply

cord or grommet, it must be replaced by the

manufacturer, its service agent or similarly qualified

person in order to avoid a hazard.

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 2

Health and safety ............................................................................

Electrical requirements ...................................................................

Steam generator overview / Features ............................................

Control panel overview ...................................................................

Temperature guide ..........................................................................

Location ...........................................................................................

Before first use ................................................................................

Using the steam generator ............................................................

Features ...........................................................................................

Maintenance ....................................................................................

Emptying and storing ......................................................................

Guarantee ........................................................................................

Contents

7 & 8

9 & 10

Personal safety

•CAUTION - HOT: Burns

can occur from

touching hot parts, hot

water or steam, or the

iron rest plate.

• WARNING: Misuse of the

appliance could cause personal

injury.

• WARNING: Never direct steam at

electrical components or fittings.

If in doubt about the suitability of

steam for cleaning an appliance,

contact the appliance

manufacturer for advice prior to

cleaning.

• WARNING: Never touch the plug

or cable with wet hands.

• WARNING: Nozzles and tools will

be hot after use. Allow to cool

before attempting to remove.

• WARNING: Do not

discharge the

steam towards

people or

animals.

Danger of

scalding.

•To protect against fire, electric

shock and personal injury, do not

immerse cord, plug or steam

generator in water or other liquid.

•The plug should be removed from

the wall socket after use, before

cleaning, filling or changing the

accessories, or carrying out user

maintenance.

Location

•Do not use or keep this product

outside.

•Do not store the appliance near hot

surfaces eg. ovens or heating

appliances.

Mains cable

•WARNING: A damaged or severed

mains cable fitted with a plug

should never be connected to the

mains supply. It must be

destroyed, as a damaged cable

becomes hazardous if connected

to a power socket.

•Do not let the mains lead come into

contact with the hot soleplate of the

iron.

•Do not allow the mains lead to

become strained.

Product safety

•WARNING: Always test on an

inconspicuous area first. Never

use on materials that can not

resist high temperature, such as

dralon, natural fur etc.

•Never modify the appliance in any

way.

Other safety considerations

•Do not use any chemical

detergents, perfumes, alcohol or

descaler etc in water.

•Repairs to electrical appliances are

only to be undertaken by trained

personnel.

•Unprofessional repairs can be

dangerous for users.

•Use only genuine Morphy Richards

spare parts and accessories.

•The appliance must not be left

unattended while connected to the

supply mains.

•This appliance is intended for

domestic use only. Misuse or use

for commercial or any other

purpose will render the guarantee

invalid.

Electrical requirements

•Check that the voltage on the rating

plate of your appliance corresponds

with your house electricity supply

which must be A.C. (Alternating

Current).

•If the socket outlets in your home

are not suitable for the plug

supplied with this appliance, the

plug should be removed by trained

authorised personnel and the

appropriate one fitted.

• WARNING: This appliance must

be earthed.

•Should the fuse in the mains plug

require changing, a 13 amp BS1362

fuse must be fitted.

STEAM

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 3

(1) Steam supply cord

(2) Cable support

(3) Iron handle

(4) Steam trigger

(5) Iron

(6) Soleplate

(7) Iron heel

(8) Control panel (see page 5)

(9) Iron rear docking hook

(10) Iron rest plate

(11) Iron-to-base lock

(12) Filling cap

(13) Detachable water tank

(14) Power cord

(15) Antiscale cartridge

(16) Antiscale cartridge drawer

(17) Base unit

(18) Cord storage clip

(19) Water tank removal tabs

Steam generator overview

1 2 43

1 14

109

1817 19

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 4

Control panel (8) overview

Select button (20)

Continue to press the select button until the

desired temperature setting is reached.

No steam indicator (21)

This illuminates when the 1 dot temperature

setting is selected. The low temperature is not

suitable for steaming.

Temperature setting indicators

(22/23/24/25)

The temperature indicators correspond with the

International Textile Care Labelling Code as shown

on the labels of your garments (see ‘Temperature

guide’ on page 6).

Steam level indicators (26/27/28)

The steam level is automatically adjusted to suit

the selected temperature setting. The steam level

indicators change when you select your desired

temperature setting.

Antiscale indicator (29)

When the antiscale cartridge requires changing,

the antiscale indicator will illuminate. This indicator

will flash if the antiscale cartridge is not fitted

properly.

Auto shut-off indicator (30)

This indicator illuminates if the appliance has

entered auto shut-off mode after not being used

for 10 minutes.

IntelliTemp setting indicator (31)

This illuminates when the product has reached the

default temperature, allowing the appliance to iron

all ironable fabrics without the temperature

needing to be adjusted.

Self Clean indicator (32)

This indicator will illuminate when the system

requires cleaning.

Low water indicator (33)

This indicator will illuminate when there is

insufficient water in the tank to produce steam.

2021 22

29 30 31 3332

23 24 25

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 5

Locate the steam generator horizontally on the

iron rest plate of your ironing board (if large

enough) or on a heat resistant stand at the same

height as your ironing board or below it. Always

ensure the steam generator is on a firm surface

when ironing.

WARNING: Do not use the product on a

surface which could be damaged by heat or

steam such as a worktop or a polished wood

surface.

If in doubt, contact Morphy Richards.

Remove any protective covers from the soleplate

(6) and the base unit (17).

Unwind and straighten the power (14) and steam

supply cords (1).

Remove the antiscale cartridge (15) from the

antiscale cartridge drawer (16) and immerse in

water for 5 minutes for better filtration. Insert

cartridge back into the antiscale cartridge drawer.

The first time you use the iron or insert a new

cartridge, hold the trigger for up to two minutes to

pull the steam through to the soleplate.

Textiles and clothes usually carry ironing

instructions. If not, follow the temperature guide

above, but test the temperature by ironing the

hem of the garment or other discreet area first.

It is advised to begin with ‘cool’ fabrics (see

above) and work up to higher settings. An iron

heats up quicker than it cools down so you’ll save

time and electricity.

If you turn the temperature level down from a hot

setting to a cooler setting, wait until the

temperature setting indicator (22/23/24/25/31)

stops flashing (indicating the correct temperature

has been reached) before you continue ironing.

You can carry the appliance by the iron handle (3)

once the iron (5) is locked to the base unit (17)

using the iron-to-base lock (11) (see ‘Storing the

steam iron’ on page 11).

Location

Before first use

Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International

Textile Care Labelling Code

Temperature guide

Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot MAX setting

Temperature level

settings

Do not iron • •• •••

Fabric Nylon, Acetates,

synthetic fabrics

Wool, Polyester

mixtures

Cotton, Linen

Rayon, Rayon

mixtures

Ironing Iron on wrong side,

if moisture

required, use

damp cloth

(not Acetate)

Fabrics requiring

this setting usually

require steam

pressing.

Steaming

Without steam

Steam level setting

(see step 4 of

‘Using the Steam

Generator’ on

page 7)

No steam

(see ‘Dry ironing’

on page 9)

Low Medium / High High

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 6

Alternatively, the water tank may be filled

without removing it from the base unit (17).

Simply open the filling cap (12), and fill the

water tank with water to the max fill line.

1a) Removing and filling the water tank 1b) Filling the water tank in situ

Remove the detachable water tank (13) using the

water tank removal tabs (19), open the filling cap

(12), and fill with water to the max fill line. Replace

the water tank.

IN HARD WATER AREAS, WE RECOMMEND A

MIX OF 50% TAP WATER AND 50% DISTILLED,

DEIONISED OR DEMINERALISED WATER.

Never use battery topping up fluid or water

containing any substances like starch, sugar,

fragrant additives or defrosted water from a

refrigerator.

NOTE: Please see point 2 of ‘Exclusions’ on page 12.

Re-filling during use

If the water level is too low, the low water indicator

will illuminate and the unit will not produce steam.

If this happens, refill the detachable water tank

(13) with water.

If a different temperature than IntelliTemp

setting is required to suit the garment (see

‘Temperature guide’ on page 6), you may adjust

the temperature as follows: press the select

button (20) repeatedly until the required

temperature setting indicator (22/23/24/25) is

displayed. Pressing the select button cycles the

options as shown in the next step.

2) Default IntelliTemp Setting 3) Temperature Selection

Plug the appliance into a mains outlet to switch

the product on. A beep will be heard and the

IntelliTemp logo (31) will illuminate on the control

panel (8). The default temperature is the

IntelliTemp setting, this allows the appliance to

iron all ironable fabrics without the temperature

needing to be adjusted. However, do not iron

any fabric with this symbol . The Intellitemp

setting indicator (31) will stop flashing and

remain constant when the IntelliTemp setting is

reached.

Using the Steam Generator

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 7

Using the Steam Generator (continued)

The steam function is ideal for relaxing the fibres

of tougher fabrics (like jeans and linen) and getting

rid of those stubborn, hard to reach creases.

To produce a steam boost during ironing, simply

double-press the steam trigger (4). To deactivate

the boost, press once on the steam trigger again.

The appropriate steam level indicator will flash

whilst the steam trigger is pressed, indicating that

steam is being produced.

NOTE: steam cannot be produced on the 1-Dot

setting - this is highlighted by the no steam

indicator (21) being visible on the control panel (8)

whilst the 1-Dot setting is selected.

When using the steam function and replacing the

iron (5) back onto the iron rest plate (10), residual

steam may create condensation on the base. This

is not the iron leaking and is normal.

ALLOW TO COOL

6) Steam boost

When you have finished ironing, disconnect the

plug from the mains outlet

NOTE: The product may occasionally produce a

pumping sound during steam ironing. This is

normal and is caused by water being pumped

from the water tank to the steam generator. If

the pumping sound suddenly becomes louder

or the steam diminishes, check and refill the

water tank if it has become empty.

7) Switching off

IntelliTemp

setting Dot 1 Dot 2

Dot 3Max

4) Temperature and steam level

The appropriate temperature setting indicator

(22/23/24/25/31) will flash until the desired

temperature is reached. Begin ironing when the

temperature indicator illuminates constantly. If you

turn the temperature down, wait until the temperature

indicator stops flashing before continuing ironing.

The steam level is automatically adjusted to suit the

selected temperature setting. This is denoted by the

steam level indicators (26/27/28) on the control panel

(8), which will change along with the temperature

setting indicators when you select your desired

temperature level. Press and hold the steam trigger

(4)

for constant steam.

5) Unlocking the iron

Unlock the iron (5) from its storage position on top

of the base unit (17) by rotating the iron-to-base

lock (11) - this enables you to lift the iron heel (7)

away from the iron rear docking hook (9).

During use, the iron may be rested on the iron rest

plate (10) with the iron-to-base lock rotated so the

flat side is upper-most (in the unlocked position).

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 8

Dry ironing

To use your steam generator as a dry iron only,

follow steps 2, 3, 4 and 5 of ‘Using the Steam

Generator’ on page 7 and 8. You do not need to

put water in the water tank (13).

Auto shut-off

the steam trigger

(4) is not used for 10 minutes,

the product will automatically turn off for safety

and to save energy. When this happens, the auto

shut-off indicator (30) will flash.

To restart,

press the select button

(20) and wait

for the temperature to rise again.

NOTE: The appliance is not turned off completely

in auto shut-off mode. To switch the product off,

unplug the product from the mains outlet.

Steam function

During steaming, small amounts of water may be

ejected from the soleplate

(6)

. This is normal and

can be avoided by using the steam for short

amou

nts of time and only when the iron is at the

correct temperature (the temperature setting

indicator (22/23/24/25/31) on the control panel

stops flashing when ready).

Sudden jolts to the boiler unit can also cause

water droplets on the soleplate; therefore, do not

move the base unit (17) during ironing.

We recommend for first time ironing that you

iron over an old towel.

Vertical steam

Vertical steam is useful for removing creases

from hanging clothes, curtains, upholstery, etc.

Hold the iron

(5)

between 1cm and 2cm away

from the item and press the steam trigger

(4)

twice in quick succession for a longer boost of

steam. To turn the steam boost off, press the

steam trigger again.

WARNING: Do not use the vertical steam

feature on clothes that are being worn.

Features

The product requires an antiscale cartridge to

help reduce limescale and extend its life. The

antiscale indicator (29) will illuminate to prompt

you to replace the antiscale cartridge which is

located in the base unit (17) behind the water tank

(13). The antiscale indicator (29) will go out only

after the antiscale cartridge has been replaced.

Maintenance

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 9

Replacing the antiscale cartridge (15)

The appliance must be plugged in and switched

ON whilst changing the cartridge, otherwise

the antiscale indicator (29) will not go out.

2Remove the water tank (13) from the base unit

(17) by holding the tabs on the side of the water

tank and pulling the tank away from the base unit.

CAUTION: The cartridge may be very

hot. Be careful when releasing the old

cartridge.

3Grasp the grip on the front of the cartridge drawer

(16) and pull it out from the base unit. Lift the old

cartridge out of the drawer and dispose of it.

4Remove the new anti-scale cartridge (15) from

the bag and immerse in water for 5 minutes for

better filtration.

5Place the new antiscale cartridge into the

cartridge drawer and push the drawer back into

the base unit until it clicks into place.

6Push the water tank back into the base unit until

it clicks into place.

7Hold the steam trigger (4) for up to two minutes

to pull the water through the antiscale cartridge

and out through the soleplate (6) as steam.

NOTE: If no antiscale cartridge is installed, or the

antiscale cartridge is not installed correctly, the

antiscale indicator will continue to flash and the

appliance will not work correctly.

Self clean

The self clean function removes scale and

minerals which have built-up in the steam

chamber. This function must be performed every

time the self clean indicator (32) illuminates.

CAUTION: Boiling hot water and lots of steam

will drain from the holes in the soleplate during

self clean. Position yourself comfortably near a

sink before you start. The self clean process

will take up to 5 minutes to complete. Do not

pl ace the iron back on the base until the self

clean process has completed.

1Fill the water tank (13) (see step 1 of ‘Using the

Steam Generator’ on page 7).

2Press and hold the select button (20) and steam

trigger (4) and hold them both for 3 seconds. A

beep will be heard and the self clean indicator

(32) will flash, showing the product is ready to

begin self cleaning. Release the select button and

steam trigger.

3Hold the iron (5) at approximately 15 centimetres

above an empty sink in the horizontal ironing

position.

Water containing loose scale and minerals will be

ejected through the holes in the iron’s soleplate

(6).

NOTE: Self clean cannot be aborted until the

process is complete.

5Once self clean is complete, the iron will resume

at the previous ironing setting and your previous

temperature setting indicator (22/23/24/25/31)

will display on the control panel (8).

6Iron over a damp cloth to remove any deposits on

the soleplate, this will also remove any water

marks that may have formed on the soleplate.

7Turn off the product (see step 7 of ‘Using the

Steam Generator’ on page 8).

To clean a coated soleplate

Do not use scouring powder or solution as this

could cause damage to the coating.

If any man-made fibres fuse to the soleplate (6),

set the iron at the MAX setting and pass it over a

clean piece of cotton to draw the deposit off the

surface.

To clean the exterior

Allow the unit to cool and wipe over with a damp

cloth and mild detergent, then wipe dry.

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 10

Allow the appliance to cool.

Remove the detachable water tank (13). Open the

filler cap (12), and empty the water tank. Once the

water tank is empty, re-attach it to the base unit (17)

Storing the steam iron

Lock the iron (5) into the storage position on top

of the base unit (17) as follows:

1Ensure the iron-to base lock (11) is in the

unlocked position (flat side facing upwards).

Push the iron heel (7) into the rear docking hook (9)

and rest the soleplate (6) on the iron rest plate (10).

Ensure the tip of the soleplate is pointing to the

arrow on the flat side of the iron-to-base lock. Then

rotate the iron-to-base lock through 180º around

the tip of the soleplate, securing the iron in place.

Attach the cord storage clip

(18)

to either side of

the base unit

(17)

by pushing the nodules on the

lower part of the clip into the holes on the

underside of the base unit.

Straighten any kinks in the steam supply cord (1)

and the power cord (14). Next, loosely loop the

cords together in a figure 8 formation and fix them

in position in the cord storage clip (18). Ensure

there is slack on the cables at the base unit end,

and on the steam supply cord at the cable support

(2) on the iron (5).

WARNING: Do not wrap the cables too tightly

as this can stress and damage the wires inside.

Damage to the cables caused by wrapping too

tightly will not be covered by the guarantee.

Helpline

If you are having a problem with your appliance,

please call our Helpline, as we are more likely to

be able to help than the store you purchased the

item from. Please have the product name, model

number and serial number to hand when you call

to help us deal with your enquiry quicker.

UK Helpline: 0344 871 0944

IRE Helpline: 1800 409 119

Spares: 0344 873 0710

Talk To Us

If you have any questions or comments, or want

some great tips to help you get the most out of

your products, join us online:

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: @loveyourmorphy

Website: www.morphyrichards.com

Emptying and storing

cable

support

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 11

RN333300 MUK Rev3 06/18

Your standard 1 year guarantee is extended for an

additional 12 months when you register the product within

28 days of purchase with Morphy Richards. If you do not

your product is guaranteed for 1 year. To validate your 2

year guarantee register with us online at

www.morphyrichards.co.uk/support

Or call our customer registration line, quoting model and

serial number, these numbers can be found on the base of

the product.

UK 0344 871 0242

IRE 1800 409 119

N.B. Each qualifying product needs to be registered with

Morphy Richards individually.

Please note that the 2 year guarantee is only available in

the UK and Ireland. Please refer to the 1 year guarantee

for more information.

It is important to retain the retailer’s receipt as proof of

purchase. Staple your receipt to this back cover for future

reference.

Please quote the following information if the product

develops a fault. These numbers can be found on the base

of the product.

Model no.

Serial no.

All Morphy Richards products are individually tested before

leaving the factory. In the unlikely event of any appliance

proving to be faulty within 28 days of purchase, it should

be returned to the place of purchase for it to be replaced.

If the fault develops after 28 days and within 12 months of

original purchase, you should contact the Helpline number

quoting Model number and Serial number on the product,

or write to Morphy Richards at the address shown.

You may be asked to return a copy of proof of purchase.

Subject to the exclusions, the faulty appliance will then be

repaired or replaced as appropriate and dispatched usually

within 7 working days of receipt.

If, for any reason, this item is replaced or repaired during

the 1 year guarantee period, the guarantee on the new

item will be calculated from original purchase date.

Therefore it is vital to retain your original till receipt or

invoice to indicate the date of initial purchase.

To qualify for the 1 year guarantee, the appliance must

have been used according to the instructions supplied.

For example, water should be emptied after each use.

Morphy Richards shall not be liable to replace or repair the

goods under the terms of the guarantee where:

1The fault has been caused or is attributable to accidental

use, misuse, negligent use or used contrary to the

manufacturer’s recommendations or where the fault has

been caused by power surges or damage caused in transit.

2The fault has been caused by using water other than that

recommended by Morphy Richards.

3The fault is caused by limescale build-up.

4The cables are damaged due to wrapping too tightly or

excessive kinking.

5The appliance has been used on a voltage supply other

than that stamped on the products.

6Repairs have been attempted by persons other than our

service staff (or authorised dealer).

7The appliance has been used for hire purposes or non

domestic use.

8The appliance is second hand.

9Morphy Richards reserves the right not to carry out any

type of servicing under the guarantee at its discretion.

•This guarantee does not confer any rights other than those

expressly set out above and does not cover any claims for

consequential loss or damage. This guarantee is offered

as an additional benefit and does not affect your statutory

rights as a consumer. Morphy Richards products are

intended for household use only. See usage limitations

within the location safety instructions.

Morphy Richards has a policy of continuous improvement

in product quality and design. The company, therefore

reserves the right to change the specification of

its models at any time.

For electrical products sold within the

European Community. At the end of the

electrical products useful life, it should not be

disposed of with household waste.

Please recycle where facilities exist. Check

with your Local Authority or retailer for

recycling advice in your country

Exclusions

Registering your 2 year

guarantee

Your 1 year guarantee

Disclaimer

The After Sales Division

Morphy Richards Ltd

Mexborough, South Yorkshire,

England, S64 8AJ

IF YOU ARE HAVING A PROBLEM

WITH ONE OF OUR PRODUCTS,

CALL OUR HELPLINE:

UK: 0344 871 0944

EIRE: 1800 409 119

SPARES: 0344 873 0710

Purolite® MB400

Causes serious eye irritation

Causes mild skin irritation.

Wash hands thoroughly after handling

Wear protective gloves / protective clothing / eye

protection / face protection.

First Aid measures

If in eyes, rinse cautiously with water for several

minutes. Remove contact lenses if present and easy

to do, continue rinsing. If eye irritation persists, Get

medical advice / attention.

Polystyrene sulphonic acid

Polyvinyl benzyl trimethyl ammonium hydroxide

Max 30% by vol.

Fill Weight <100g

CAS 69011-20-7

CAS 69011-18-3

WARNING

ANTI SCALE REFILL

RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 12