Multibrackets 0568 User Manual
Displayed below is the user manual for 0568 by Multibrackets which is a product in the Signage Display Mounts category. This manual has pages.
Related Manuals
www.multibrackets.com
M Public Video Wall Mount Push HD
INSTALLATION AND USER MANUAL
Warning
For correct and safe use
This manual contains instructions and drawings for correct
and safe use of the product. Non-compliance with des-
criptions and drawings and/or improper use of the product
could cause the effects specied below. Please note the
following hazard symbols before reading the remainder of
this session, and follow the instructions thoroughly.
Danger: any failure in observing these instructions could
lead to death or serious injuries.
Warning: any failure in observing these instructions
could lead to failure or damage to objects.
Meaning of the symbol: the symbol warns against doing
something.
Special precautions for safety.
Danger
- Follow the instructions reported in this manual about the
installation method. Any failure in observing these instruc-
tions could lead to damage or injuries due to MONITOR
set or other objects falling down.
- Please use qualied personnel for installation
- Make sure that the wall where the MONITOR set has to
be installed can bear the weight of the MONITOR set
itself.
- Do not apply any other weight to the MONITOR set or the
bracket. This could make the MONITOR set fall down and
cause injuries or damage to objects.
- Do not change or alter the components for installation.
This make the MONITOR set fall down and cause injuries
or damage to objects.
Warning
Carry out the installation in places without humidity or dust.
- Do not install the MONITOR screen in places with a
high degree of humidity and dust. This could bring
about re or electric shocks.
- Do not install the MONITOR screen in places where it
could get in contact with fumes or vapours. This could
bring about re or electric shocks. ¨
Carry out the installation in a well vented area.
- Do not obstruct the holes for air passage on the MO-
NITOR screen. This could bring about re.
- Do not place the MONITOR set in a poorly vented
place.
Please take careful note of the following: use qualied
personnel for the installation. The producer will not bear
responsibility for any improper installation or any accident,
damage or injury that may come arise from incorrect instal-
lation.
Videowall with quick lock push system
www.multibrackets.com
Parts of the package
Dimensions
Wall fixing point
Warning – danger x all cables to prevent possible damage.
Bracket (x1) Monitor sustain (x2)
Weight max load 50 kg
Screws M6x16 (x4) Screws M8x14 (x4)
www.multibrackets.com
Installation lcd bracket
Installation first bracket
➀
➁
1.1 Mount on the back of monitor the lcd bracket (S).
1.2 Loose completly the two safety screws (D).
2.1 Determine the center (C) of the rst monitor on
bottom left.
2.2 Mark 252 mm up from (C) to the centering hole (A).
2.2 Fix the bracket horizontally by using the holes (F)
with a suitable anchor for your kind of wall.
Safety screw D
Centering hole
Perfect horizontal line
Level
Fixing holes
www.multibrackets.com
Mounting an aligning of the other bracket
➂
3.1 After you have mounted the rst bracket as des-
cribed, draw a horizontal line (the use of a laser
leveller may help).
3.2 Using the appropriate spacer, you can now place
the second bracket. Proceed in this way with the
other brackets.
3.3 Using the appropriate spacer, mount the rst
bracket of the next row. Draw a horizontal line
again. Proceed with the mounting of the next
brackets.
Allignement line
Allignement line
www.multibrackets.com
Kit mounting spacers
Example of horizontal monitor mounting with spacers
Example of vertical monitor mounting with spacers
➃
For quick installation of the videowall it’s advised to use
this spacer kit (not supplied). For each model of monitor
there is a specific spacer kit available.
Monitor width + 1 mm
Monitor width + 1 mm
Monitor height + 1 mm
Monitor height +
1 mm
www.multibrackets.com
Monitors allignement
➄
5.1 First hook bottom of the left monitor. Be careful to keep the knobs (X) between the brackets (S)
5.2 Check that the horizontal center of the monitor is alligned with the horizontal center of the
bracket.
5.3 Using a level allign the monitor parallel to the oor by using Z axel adjustment knob.
5.4 Using the Y axis regulation knob to ensure that every corner of the monitor is equidistant from
the wall.
5.5 Use a plumb for allign the rst column of monitors taking at least 1mm between them.
5.6 Hook remaning monitors taking at leas 1 mm between them.
5.7 When the position adjustement of the monitor is nished if necessary tight the safety screws
previously losened.
X axis adjustement knob Z axis adjustement knob
Y axis adjustement knobY axis adjustement knob
Level
Plumb
www.multibrackets.com
Mounting instructions Extender kit (600x400) / (800x400)
Mounting instructions Extender kit (600x400) / (800x400)
Landscape monitor Mount on the right side hole
Mount on the left side hole
Portrait monitor
screws
Screw
screws
TC+ M6x14
www.multibrackets.com
Mounting instructions Vesa 400x400 kit (included),
(max 580x440) horizontal monitor
Mount on the left side hole
Mount on the right side hole
screws
TC+ M6x14
Cross socket button head
screws M5x25
Nylon spacer Ø 20x11 mm
Mounting instructions Vesa 400x400 kit (included),
(max 580x440) vertical monitor