Multibrackets 6744 User Manual
Displayed below is the user manual for 6744 by Multibrackets which is a product in the TV Mounts category. This manual has pages.
Related Manuals
EAN: 7350073736744
M Pull Down Full Motion Flexarm
2
3
4
PACKAGE CONTENTS
Mount your television conveniently above your fireplace using this Above Fireplace Mount.
INTRODUCTION
FEATURES
It is capable of supporting televisions with VESA patterns from 100x100 and 600x500
and weighing between 11~62 lbs
(5~28
kg). The mount allows you to keep the
TV safely up and out of the way when not in use, then you can pull it down to eye level
for comfortable viewing.
Designed for flat screen televisions from 42" ~65"
Supports televisions weighing between 11~62 lbs(5~28kg)
Supports VESA mounting patterns between 100x100 and 600x500
Designed to mount to wood stud frame wall above the fireplace mantle
Television can be pulled down to eye level for comfortable viewing
Full motion mount allows for ±30° swivel, ±5° rotation, and +10°/-5°tilt
AA.
X 4
X 1
X 1
X 1
X 1
X 2
X 1
X 2
X 1
X4
CC.
EE. GG.
HH. II.
FF.
BB.
DD.
5
Required Tools
#2
Portable
D
Phillips Sc
r
D
rill
r
ewdrive
r
El
e
e
ctronic St
u
u
d Finde
r
Pencil
1/4" Drill
1/2" Soc
k
Bit
k
e
t
Pr
o
C
a
S
o
tective Ey
e
a
rpenter's L
S
ocket Wre
n
e
wea
r
evel
n
ch
You will need the following tools for installation.
F: M8 x 35 mm
x4
E: M8 x 20 mm
x4
D: M6 x30 mm
x4
B: M5 x 30 mm
x4
C: M6 x 15 mm
x4
A: M5 x 15 mm
x4
H: M5 / M6
x9
I: 5 mm
x8
J: 13 mm
x4
G: M8 x 50 mm
x4
L: M8
x6
K: M8 x 70mm
x6
M: Concrete Anchor
x6
N: M8 x 60 mm
x4
O: M6 x 15 mm
x2 x2
P: M6
x5
Q: M6 S: M4 x 25 mm
x2
R: M6 x 8 mm
x8
T: M5 x 8 mm
x4
X: 5 mm
W: M6 Y: 8 mm Z: 8 mm
x5
U: Cable Ties V: Arm Lock Pin
6
INSTALLATION CONSIDERATIONS
Warning Ensure that the mounting surface can safely support the combined weight of
of the assembled mount and installed.
1. The temperature at the front of the fireplace mantle must never exceed 110°F (43°C).
2. The wall to which this mount will be attached must be a wood stud type, with studs
spaced no more than 24"(609mm) apart. These studs should be symmetrically
positioned or the installation will not be symmetrical to the fireplace mantle. The
wall must be no more than 5/8" (16mm) thick.
3. The fireplace mantle must extend no more than 24" (60.9 cm) from the surface of
the wall.
Form 42”~65”
Weight:
11~62 lbs
(5~28kg)
24
7
INSTALLATION
Mantle size
Less than 8” Wallboard height +5”
8”~11” Wallboard height +9”
11”~13” Wallboard height +11”
13”~16” Wallboard height +14”
Space height
4. This mount is intended for flat screen televisions (LCD, LED, Plasma) only. The
mounted television should be between 42 ~ 65" and weigh between 11~62 lbs.
5. The vertical space above the mantle must be greater
than the height of the wallboard .The required vertical
space depends on how far the mantle extends out
from the wall.
Use a tape measure to determine the center point of the mantle. Mark the
centerline with a pencil or tape.
8
WOOD
Reference the step 5
at the page 6
1
9
2BRICK OR CONCRETE
10mm
8
Reference the step 5
at the page 6
10
3
4
5
5mm
N
Q
H
11
6
7
BRICK
OR
CONCRETE
1/2”SocketSocket Wrench
M
KL
KL
1/2”SocketSocket Wrench
WOOD
12
8
9
10
Lock the arm
V
A - G
H
I - J
or
O
P
5mm
13
11
11
12
a.
W/O Sound
R
R
b.
With Sound
14
13
14
15
Please adjust the Handle distance
to the height of the sound
Q
H
15
16
17
18
T
HH
S
16
19
Keep the TV’s height
in this angle.
Adjusting the force value
in this state is the easiest.
Release
Adjustable the bracket’s constant force
Attention: The weight of the TV set in the weighing range
“ + ” :Increase the constant force
A: The TV sets can be hovering at any height, don not need to adjust.
B: The TV sets up, turn to “ - ” until free hovering.
C: The TV sets down, turn to “ + ” until free hovering.
“ - ” :Reduce the constant force
90°
17
19 -2
19 -3
B: The TV sets up
Adjust until free hovering
Turn to “ ”
8mm
C: The TV sets down
Z
+
19 -4
18
20
21
8mm Z
+
Adjust until free hovering
Turn to “ ”
a. b.
Height adjustment 230mm
230mm
Level adjustment
±5°
19
22
23
Tilt adjustment
-5 ~ +10°
Swivel ±30°
20
24
25
26
wire
cable
Cable ties
Cable ties
Pull in the cover plates
Swivel ±30°