Multibrackets 8748 User Manual
Displayed below is the user manual for 8748 by Multibrackets which is a product in the Signage Display Mounts category. This manual has pages.
Related Manuals
EAN: 7350073738748
4
3
Read and understand all instructions, and operate in strict accordance with the instructions.
Please ask the installation personnel to assemble the mobile frame and at least two professionals to install the TV.
Do not install the mobile cart near the place with plenty of water or high humidity.
Do not modify or change the installed parts without permission.
After installation, do not hang heavy objects on the product or make the product collide violently.
Do not install the mobile cart in a place where it is easy to shake or fall.
9
8
7
Do not install the mobile cart in the place with direct sunlight or other strong light.
The company shall not be responsible for any injury or loss caused by improper installation and operation.
5
Do not install the mobile cart near the vent.
2
Note: if the installed TV exceeds the rated load, personal injury may be caused.
Once the product is damaged, it is not allowed to continue to use, or the consequences will be borne by itself.
A
B
C
D
E
F
G
Be careful with your hands. No stampede The weight of countertop
shall not exceed 15kg
NO
图示
Diagrammatic
presentation Designation
（M10X80）
（M5X12）
2
2
4
2
4
1
1
H
I
（M5X8）
2
8
Fixed on the main body,
Please remove C before installation
Fixed on vertical bar (B),
Please remove d before installation
Fixed on screw M10x80 (C),
Please remove E before installation
2
Battery type：LR23A 12V
J
1
Parts
Quantity Remarks column
Main Boby
Foot
Vertical bar
Screw
Screw
Washer
Remote control
(Battery free)
Wrench
Self sealing bag
Screw
Extended
supporter
Non standard matching
Non standard matching
Safety instructions
3
4
TV hole spacing：H:100/200/300/400/500/600mm
V:200/400/600mm
Installing the foot
1
2
E
C
G
TV
1
2
3
1The vertical bar is inserted into the
hole from above,If you can't insert it,
You can move a hole left or right
2Buckle the anti disengaging hook and
pull it out by handCheck the TV and
make sure the hook is in place.
3Screw D locked
34
B
D
500mm340mm
A
First remove the screw C indicated
by the arrowAnd washer E，There
are 4 left and right.
B
Please remove the screw D indicated by the arrow first
X4
M5X21 M6X30 M8X20
X4 X4
X4
M5X30
BX4
M6X23
D
M8X30
X4
E F G
X4
M6X12
C
X4
J
K
According to the actual situation of TV screw hole,
select the appropriate screw.
D
The direction of the feet can't be wrong
TV installation sequence
TV removal sequence
1.Remove screw D ( )
2.Pull off the anti disengaging hook( )
3.Lift the TV from the bottom up,
Pull the vertical bar ( ) out of the hole
3
2
1
Front side
Front Back
Wired remote
control
Washer 8mm
thick
Washer 4mm
thick
Install TV
Caution
Screw D must be locked tightly,
otherwise the TV may fall down.
5
B
600mm~800mm
1. After the position is fixed, please lock the wheel
to prevent the mobile frame from moving.
2. Please release the brake before moving,
otherwise it will shake when moving.
I
67
J
0-90°
F
Caution Don't pull out the plug when the cart is working,
or the remote control will show an error message.
If the remote control displays an error message “ER1" or “ER2" during the lifting process,
Press ( ) untill“res”shows up.
Kee pressing ( ) and release it after 1or 2 seconds,
cart will move down 1cm.
Repeat step .
Cart will be restored when it moves down to the bottom.
1
2
3
4
2
Caster with brake
Remote control Wired remote control
-Flip forward
-Flip back
-Move up
-Move down
“S+1”:Record current height,
when you press“1”，
the cart will restore to this height.
“S+2”:Record current height,
when you press“2”，
the cart will restore to this height.
-Move up
-Move down
-Flip forward
-Flip back
All four buttons are freeEvery
time you press it, you'll keep
moving,And press any key,
it will standStop moving
When the horizontal direction required by vertical bars (B) is from 600 mm to 800mm
5
Wired remote control
Wired remote control
45kg
0°90°
80kg
770mm-1420mm
40"-70"(16:9 wide screen)
120kg
6
LR23A 12V
Flippable Electrical Mobile Cart
Product information
Model
Net Weight
Maximum Load
(Lift up/down)
Flip Angle
Maximum Load(Flip)
Height Adjustment
Applicable TV Size
Battery Type