Table of Contents
- Contents
- 1. Overview
- 2. Get Started
- 3. Extender Network Settings
- Enable or disable the One WiFi Name feature
- Enable or disable Smart Connect
- View connected devices
- View WiFi settings
- Change the WiFi network name
- Turn off the SSID broadcast to create a hidden network
- Disable or enable the WiFi radios
- Change the WiFi speed
- Use WPS to add a computer to the extender’s WiFi network
- Deny access to a computer or WiFi device
- Set up an access schedule
- Change the extender’s device name
- Set up the extender to use a static IP address
- Adjust the WiFi coverage
- Enable FastLane technology
- Configure a router with advanced MAC settings to work with your extender
- 4. Maintain and Monitor the Extender
- Change the extender login user name and password
- Turn password protection off and on
- Recover a forgotten user name or password
- Automatically adjust for daylight saving time
- Manually set the extender clock
- Back up and manage the extender configuration
- Back up the configuration settings
- Restore the configuration settings
- Return the extender to its factory default settings
- Update the extender firmware
- Restart the extender from the extender web interface
- Turn the LEDs On or Off
- 5. FAQs and troubleshooting
- 6. Supplemental Information
NETGEAR 4PT AX1800 WIFI MESH EXTENDER User Manual
Displayed below is the user manual for 4PT AX1800 WIFI MESH EXTENDER by NETGEAR which is a product in the Network Extenders category. This manual has pages.
Related Manuals
User Manual
AX1800 4-Stream WiFi Mesh Extender
Model EAX20
NETGEAR, Inc.
350 E. Plumeria DriveJune 2020
San Jose, CA 95134, USA202-12035-02
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Trademarks
©NETGEAR, Inc. NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
2
AX1800 4-Stream WiFi Mesh Extender
Contents
Chapter 1 Overview
Unpack Your Extender.........................................................................6
LEDs........................................................................................................7
Back Panel..............................................................................................9
System Requirements........................................................................10
How the Extender Works...................................................................10
Chapter 2 Get started
Install the WiFi extender....................................................................12
Place the extender and apply power...............................................12
Connect to an existing WiFi network...............................................12
Connect with the Nighthawk app................................................13
Connect with WPS..........................................................................14
Connect with the NETGEAR installation assistant......................17
Use the extender in access point mode..........................................18
Connect a device to the extender network.....................................19
Connect a device to the extender network using WiFi.............19
Connect a device to the extender network using WPS.............19
Log in to the extender after installation...........................................19
Run the Smart Setup installation.......................................................20
Chapter 3 Extender Network Settings
Enable or disable the One WiFi Name feature...............................23
Enable or disable Smart Connect.....................................................24
View connected devices....................................................................25
View WiFi settings...............................................................................26
Change the WiFi network name.......................................................27
Turn off the SSID broadcast to create a hidden network..............28
Disable or enable the WiFi radios....................................................29
Change the WiFi speed.....................................................................30
Use WPS to add a computer to the extender’s WiFi network.......31
Use WPS with the push button method......................................32
Use WPS with the PIN method.....................................................33
Deny access to a computer or WiFi device.....................................34
Set up an access schedule.................................................................35
Change the extender’s device name...............................................36
3
Set up the extender to use a static IP address................................37
Adjust the WiFi coverage..................................................................38
Enable FastLane technology.............................................................39
Configure a router with advanced MAC settings to work with your
extender...............................................................................................40
Chapter 4 Maintain and monitor the extender
Change the extender login user name and password..................43
Turn password protection off and on..............................................44
Recover a forgotten user name or password..................................45
Automatically adjust for daylight saving time.................................46
Manually set the extender clock.......................................................46
Back up and manage the extender configuration..........................47
Back up the configuration settings...................................................48
Restore the configuration settings...................................................49
Return the extender to its factory default settings.........................50
Use the Reset button.....................................................................50
Log in and reset the extender to factory settings......................50
Update the extender firmware..........................................................52
Check for new firmware and update the extender....................52
Manually upload firmware to the extender................................53
Restart the extender from the extender web interface..................54
Turn the LEDs On or Off....................................................................55
Chapter 5 FAQs and troubleshooting
FAQs.....................................................................................................58
Find the Extender’s IP address..........................................................59
Cannot Connect to the Extender......................................................60
Cannot Join a WiFi Network and Receive an Error Message.......60
Cannot access mywifiext.net.............................................................61
Cannot connect to extender using the Nighthawk app................62
Chapter 6 Supplemental Information
Factory Default Settings.....................................................................64
Technical and Environmental Specifications..................................65
4
AX1800 4-Stream WiFi Mesh Extender
1
Overview
The WiFi Range Extender boosts your existing network range and speed, delivering
tri-band WiFi.
This chapter covers the following topics:
• Unpack Your Extender
• LEDs
• Back Panel
• System Requirements
• How the Extender Works
Note: For more information about the topics covered in this manual, visit the support
website at support.netgear.com.
5
Unpack Your Extender
Your package contains an extender and power adapter.
Figure 1. Extender package contents
User Manual6Overview
AX1800 4-Stream WiFi Mesh Extender
LEDs
The following table describes the LEDs.
Figure 2. Front panel
User Manual7Overview
AX1800 4-Stream WiFi Mesh Extender
Table 1. LED descriptions
DescriptionLED
•Solid white. An Ethernet device is connected to an Ethernet port.
•Off. An Ethernet device is not connected to the extender.
Ethernet LED
•Solid white. The extender’s 5 GHz WiFi radio is operating.
•Off. The extender’s 5 GHz WiFi radio is off.
5 GHz LED
•Solid white. The extender’s 2.4 GHz WiFi radio is operating.
•Off. The extender’s 2.4 GHz WiFi radio is off.
2.4 GHz LED
This LED indicates the WiFi connection between the extender and the router.
•Solid white. Best connection.
•Solid amber. Good connection.
•Solid red. Poor connection.
•Off. No connection.
Router Link LED
•Blinking white. A WPS connection is being established.
•Solid white. The extender network is enabled with WiFi security (either
WPA, WPA2, or WPA3 WiFi security).
•Off. The extender network is enabled without WiFi security.
WPS LED
•Solid amber. The extender is booting.
•Solid white. The extender is powered on.
•Blinking amber. The extender is resetting to its factory default settings.
•Blinking white. The firmware is corrupted.
•Off. The extender is powered off.
Power LED
User Manual8Overview
AX1800 4-Stream WiFi Mesh Extender
Back Panel
The back panel of the extender provides a Reset button, Ethernet ports, and a DC power
connector.
Figure 3. Back panel
The back panel contains the following components:
1. Reset button. Pressing this button resets the extender. If the Reset button is pressed
for at least seven seconds, the Power LED blinks amber, and the extender returns
to its factory settings.
2. Ethernet ports. Use the four Gigabit Ethernet RJ-45 LAN ports to connect the
extender to LAN devices.
3. DC power connector. Connect the power adapter that came in the product package
to the DC power connector.
User Manual9Overview
AX1800 4-Stream WiFi Mesh Extender
System Requirements
You need the following to install your extender:
•2.4 GHz or 5 GHz 802.11 a/b/g/n/ac/ax wireless router or gateway
•Compatible web browser:
-Microsoft Internet Explorer® 8.0 or higher
-Firefox 2.0 or higher
-Safari 5.1 or higher
- Google Chrome 25.0 or higher
How the Extender Works
The extender works like a bridge between a WiFi router (or a WiFi access point) and a
WiFi device outside the range of the WiFi router. The extender performs two main jobs:
•The extender connects to a working WiFi network.
When the extender connects over WiFi to an existing network, it functions as a
network client, similar to how a WiFi device connects to a network.
•The extender acts as an access point for WiFi devices.
The extender broadcasts its own WiFi network that WiFi devices can join. In its role
as an access point, the extender performs tasks that WiFi routers do, such as
broadcasting its network name (SSID).
The extender must do each of these jobs so that both ends of the bridge are in place.
User Manual10Overview
AX1800 4-Stream WiFi Mesh Extender
2
Get started
This chapter covers the following topics:
• Install the WiFi extender
• Place the extender and apply power
• Connect to an existing WiFi network
• Use the extender in access point mode
• Connect a device to the extender network
• Log in to the extender after installation
• Run the Smart Setup installation
11
Install the WiFi extender
Place the extender, apply power, and connect the extender to your existing WiFi network.
Place the extender and apply power
To place the extender and apply power:
1. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
2. Plug the extender into an electrical outlet.
3. Wait for the Power LED to light solid white.
Connect to an existing WiFi network
To extend the range of your WiFi network, you must connect the extender to your
existing router's WiFi network.
Note: If your router’s WiFi security is set to WPA enterprise, WPA2 enterprise, or WEP,
your extender can’t connect to your router. You must change your router’s WiFi security
setting.
You can connect your extender to your router's WiFi netowrk using one of these methods:
•Connect with the Nighthawk app. The Nighthawk app guides you through the
connection process. For more information, see Connect with the Nighthawk app on
page 13.
•Connect with WPS. If your router supportsWi-Fi Protected Setup (WPS), use WPS
to connect your extender to your router's WiFi network.
For more information, see Connect with WPS on page 14.
•Connect with the web browser setup. You can use the extender's web browser
setup, called the NETGEAR installation assistant. and For more information, see
Connect with the NETGEAR installation assistant on page 17.
User Manual12Get started
AX1800 4-Stream WiFi Mesh Extender
Connect with the Nighthawk app
You can connect your extender to your router using the NETGEAR Nighthawk app.
To connect with the Nighthawk app:
1. Download the Nighthawk app on your mobile device.
For more information about the Nighthawk app, visit Nighthawk-app.com.
2. On your mobile device, open the WiFi connection manager, then locate and connect
to the extender network called NETGEAR_EXT.
3. Launch the Nighthawk app.
4. Follow the prompts to connect your extender to your existing router WiFi network.
5. Unplug your extender and move it to a new location.
We recommend that the new location be about halfway between your router and
the area with a poor WiFi signal.
6. Power on your extender.
7. Use the Router Link LED to help you choose a spot where the extender-to-router
connection is optimal.
8. If the Router Link LED doesn’t light white, plug the extender into an outlet closer to
the router and try again.
Keep moving the extender to outlets closer to the router until the Router Link LED
lights white.
9. Reconnect your computer or mobile device to the new extended WiFi network.
User Manual13Get started
AX1800 4-Stream WiFi Mesh Extender
The following tables show an example of what your 2.4 and 5 GHz extender WiFi
names might look like if your extender connects to both 2.4 GHz and 5 GHz WiFi
networks from a dual-band router:
Table 2. Existing dual-band router WiFi names example
Example router WiFi namesDual-band router WiFi networks
MyWiFiexample2.4 GHz router WiFi network
MyWiFiExample-5G5 GHz router WiFi network
Table 3. New extender WiFi names example
Example extender WiFi names
(if the extender connects to both the 2.4 GHz
and 5 GHz router WiFi networks)
Extender WiFi networks
MyWiFiExample2.4 GHz extender WiFi network
MyWiFiExample-5G5 GHz extender WiFi network
Connect with WPS
Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the
network name and password. For help with the WPS button on your WPS-enabled
device, check the instructions or online help that came with that device. Some older
equipment cannot use WPS.
Note: WPS does not support WEP network security or a hidden SSID network. If your
existing WiFi network uses WEP security or its SSID is hidden, follow the instructions in
Connect with the NETGEAR installation assistant on page 17.
To use WPS to connect the extender to your WiFi router:
1. Press the WPS button on the extender until the WPS LED blinks.
2. Within two minutes, press the WPS button on your router.
When the extender connects to your existing WiFi network, the WPS LED on the
extender lights.
If the Router Link LED lights white, the connection between the router and extender
is good. If the Router Link LED lights amber or red, move the extender closer to the
router and try again.
User Manual14Get started
AX1800 4-Stream WiFi Mesh Extender
If the Router Link LED lights white, the connection between your router and extender
is good. If the Router Link LED lights amber or red, move the extender closer to the
router and try again.
Note: If your router supports the 5 GHz band and your extender didn’t connect to
that band, repeat the WPS process.
3. Unplug your extender and move it to a new location.
We recommend that the new location be about halfway between your router and
the area with a poor WiFi signal.
The extender must be within the range of your router WiFi network.
4. Power on your extender.
5. Use the Router Link LED to help you choose a spot where the extender-to-router
connection is optimal.
Keep moving the extender to outlets closer to the router until the Router Link LED
lights white.
6. If the Router Link LED doesn’t light white, plug the extender into an outlet closer to
the router and try again.
Keep moving the extender to outlets closer to the router until the Router Link LED
lights white.
7. Reconnect your computer or mobile device to the new extender WiFi network.
After the setup, the One WiFi Name feature is enabled, which allows your extender
to use the same WiFi network settings as your router.
8. Connect your WiFi-enabled computer or mobile device to the extended network.
Your extender uses the same WiFi network settings as your router for its 2.4 GHz
and 5 GHz extended networks.
User Manual15Get started
AX1800 4-Stream WiFi Mesh Extender
For example, if your extender connects to the router’s 2.4 GHz WiFi band only, your
extender uses your router’s 2.4 GHz WiFi settings for both its networks. The following
tables show an example of what your extender WiFi network names might look like:
Table 4. Existing dual-band router WiFi names example
Example router WiFi namesDual-band router WiFi networks
MyWiFiexample2.4 GHz router WiFi network
MyWiFiExample-5G5 GHz router WiFi network
Table 5. New extender WiFi names example
Example extender WiFi names
(if the extender connects to the 2.4 GHz router
WiFi network only)
Extender WiFi networks
MyWiFiExample2.4 GHz extender WiFi network
MyWiFiExample5 GHz extender WiFi network
If your extender connects to the router’s 5 GHz WiFi band, your extender uses your
router’s 5 GHz WiFi settings for both its networks. The following tables show an
example of what your extender WiFi network names might look like:
Table 6. Existing dual-band router WiFi names example
Example router WiFi namesDual-band router WiFi networks
MyWiFiexample2.4 GHz router WiFi network
MyWiFiExample-5G5 GHz router WiFi network
Table 7. New extender WiFi names example
Example extender WiFi names
(if the extender connects to the 5 GHz router
WiFi network only)
Extender WiFi networks
MyWiFiExample-5G2.4 GHz extender WiFi network
MyWiFiExample-5G5 GHz extender WiFi network
User Manual16Get started
AX1800 4-Stream WiFi Mesh Extender
Note: Since your router and extender networks share the same WiFi network name,
only one WiFi network name is broadcast.
Connect with the NETGEAR installation assistant
You can use the NETGEAR installation assistant to connect your extender to your existing
WiFi router network. To use the NETGEAR installation assistant, you must launch a web
browser on your computer or mobile device.
To use the NETGEAR installation assistant to connect the extender to your WiFi
router:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection
manager and locate and connect to the extender network called NETGEAR_EXT.
2. Launch web browser.
3. Enter http://www.mywifiext.net/.
The NETGEAR installation assistant displays.
4. Follow the prompts to connect your extender to your existing router WiFi network.
5. Unplug your extender and move it to a new location.
We recommend that the new location be about halfway between your router and
the area with a poor WiFi signal.
6. Power on your extender.
7. Use the Router Link LED to help you choose a spot where the extender-to-router
connection is optimal.
8. If the Router Link LED doesn’t light white, plug the extender into an outlet closer to
the router and try again.
Keep moving the extender to outlets closer to the router until the Router Link LED
lights white.
9. Reconnect your computer or mobile device to the new extended WiFi network.
User Manual17Get started
AX1800 4-Stream WiFi Mesh Extender
Use the extender in access point mode
You can use the extender as a WiFi access point, which creates a new WiFi hotspot by
using a wired Ethernet connection.
Figure 4. Extender in access point mode
To use the extender in access point mode:
1. Plug the extender into an electrical outlet.
2. Wait for the Power LED to light amber and then turn white.
3. Connect a computer or mobile device to the extender using a WiFi or Ethernet
connection:
•WiFi. On your WiFi-enabled computer or mobile device, open the WiFi connection
manager and connect to the extender network called NETGEAR_EXT.
•Ethernet. Connect the Ethernet cable to the Ethernet port on your computer and
extender.
Note: If you want to use an Ethernet connection, you must do this before you
connect your extender to your modem router or router.
4. Launch a web browser and visit http://www.mywifiext.net/.
The NETGEAR installation assistant displays.
5. Use an Ethernet cable to connect your router to an Ethernet port on the extender.
Note: Do not connect your extender directly to your DSL or cable modem. The
extender does not function as a router. If your network includes a DHCP server, you
can connect the extender to a switch or hub that is connected to the DHCP server.
6. Return to the NETGEAR installation assistant and follow the prompts to finish setting
up your extender as an access point.
User Manual18Get started
AX1800 4-Stream WiFi Mesh Extender
Connect a device to the extender network
After you complete the setup process, you can connect all your devices to the new
extender network using a WiFi or WPS connection.
Connect a device to the extender network using WiFi
If you enabled the One WiFi Name feature, your extender uses the the same WiFi network
name and password as your router.
To connect to the extender WiFi network:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection
manager that manages your WiFi connections.
The WiFi connection manager scans for WiFi networks in your area.
2. Find and select your extender’s WiFi network name (SSID) and enter your extender’s
WiFi password.
This is the SSID and password that you set up during the installation process. If you
enabled the One WiFi Name feature, use your router’s SSID and password.
Connect a device to the extender network using WPS
For help with the WPS button on your WPS-enabled device, check the instructions or
online help that came with that device. Some older equipment cannot use WPS.
To connect to the extender using a WPS connection:
1. Press the WPS button on the extender until the WPS LED blinks white.
2. Within two minutes, press the WPS button on your WPS-enabled device.
When the extender connects to your WPS-enabled device, the WPS LED lights solid
white.
Log in to the extender after installation
After installation, you can log in to the extender to view or change the extender’s settings.
User Manual19Get started
AX1800 4-Stream WiFi Mesh Extender
To log in to the extender:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext.local/ or http://mywifiext/
-Mac computers and iOS devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address> (for example,
http://192.168.1.3)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
Run the Smart Setup installation
You can use the Smart Setup to change the extender settings. This is an easy way to
connect the extender to a different router or to change the extender WiFi network name
(SSID) or WiFi password.
To run the Smart Setup:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext.local/ or http://mywifiext/
-Mac computers and iOS devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address> (for example,
http://192.168.1.3)
-For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
User Manual20Get started
AX1800 4-Stream WiFi Mesh Extender
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. Click the SMART SETUP button.
5. Follow the prompts.
User Manual21Get started
AX1800 4-Stream WiFi Mesh Extender
3
Extender Network Settings
This chapter covers the following topics:
• Enable or disable the One WiFi Name feature
• Enable or disable Smart Connect
• View connected devices
• View WiFi settings
• Change the WiFi network name
• Turn off the SSID broadcast to create a hidden network
• Disable or enable the WiFi radios
• Change the WiFi speed
• Use WPS to add a computer to the extender’s WiFi network
• Deny access to a computer or WiFi device
• Set up an access schedule
• Change the extender’s device name
• Set up the extender to use a static IP address
• Adjust the WiFi coverage
• Enable FastLane technology
• Configure a router with advanced MAC settings to work with your extender
22
Enable or disable the One WiFi Name
feature
The One WiFi Name feature enables your extender to use the same WiFi network settings
as your router.
If you enabled the One WiFi Name feature, your extender uses the same WiFi network
name and password as your router.
The following is an example of what your WiFi network names might look like if One
WiFi Name is enabled:
•Router 2.4 GHz WiFi network name. MyWiFiExample
•Router 5 GHz WiFi network name. MyWiFiExample-5G
•Extender 2.4 GHz WiFi network name. MyWiFiExample
•Extender 5 GHz WiFi network name. MyWiFiExample-5G
Note: If you enable the One WiFi Name feature and your router's 2.4 GHz and 5 GHz
networks use different network names, you cannot enable the Smart Connect feature.
To enable or disable the One WiFi Name feature:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
User Manual23Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. Enable or disable the One WiFi Name feature:
•Enable the One WiFi Name feature. To enable the One WiFi name feature,
select the Yes radio button.
If this is the first time you’re enabling the One WiFi Name feature, you must run
the Smart Setup. Go to the Status page and click the SMART SETUP button to
run the Smart Setup.
•Disable the One WiFi Name feature. To disable the One WiFi Name feature,
select the No radio button.
If you disable this feature, you can set a new SSID and password for the extender’s
2.4 GHz and 5 GHz networks in the Network Name (SSID) and WiFi Password
fields on this page.
7. Click the SAVE button.
Your settings are saved.
Enable or disable Smart Connect
The Smart Connect feature selects the fastest WiFi band for your WiFi devices to connect
to. To enable the Smart Connect feature, your extender's 2.4 GHz and 5 Ghz networks
must use the same network name and password.
Note: If you enabled the One WiFi Name feature and your router's 2.4 GHz and 5 GHz
networks use different network names, you cannot enable Smart Connect. You can only
enable Smart Connect if your extender's 2.4 GHz and 5 GHz WiFi networks use the same
network name.
To enable or disable the Smart Connect feature:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
User Manual24Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. Enable or Disable the Smart Connect feature:
•Enable the Smart Connect feature. To enable the Smart Connect feature, select
the Yes radio button.
Note: To use this feature, the 2.4 GHz and 5 GHz networks must use the same
SSID and password.
•Disable the Smart Connect feature. To disable the Smart Connect feature, select
the No radio button.
If you disable this feature, you can set a new SSID and password for the extender’s
2.4 GHz and 5 GHz networks in the Network Name (SSID) and WiFi Password
fields on this page.
7. Click the SAVE button.
Your settings are saved.
View connected devices
You can view a list of devices that are connected to the extender network.
User Manual25Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
To view connected devices:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Connected Devices.
The Connected Devices page displays. The devices connected to the extender
displays on the page.
View WiFi settings
To view the WiFi settings:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
User Manual26Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays the WiFi settings.
Change the WiFi network name
To change the WiFi network name:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
User Manual27Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. In the 2.4 GHz or 5 GHz Network Name (SSID) field, type a new network name.
7. Click the SAVE button.
Your settings are saved.
Turn off the SSID broadcast to create a
hidden network
By default, the extender broadcasts its WiFi signal so that its WiFi network names (SSIDs)
are easy for you to find and connect to from your computer, tablet, or smartphone. You
can turn off the SSID broadcast to create a hidden WiFi network. To connect to a hidden
network you must know its SSID and password and manually enter them.
To turn off the SSID broadcast to create a hidden network:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
User Manual28Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. In the 2.4 GHz or 5 GHz Network section, clear the Broadcast the Network Name
(SSID) check box.
7. Click the SAVE button.
Your settings are saved.
Disable or enable the WiFi radios
By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands.
If you disable the WiFi radios, then no one can connect with WiFi to the extender.
To enable or disable the WiFi radios:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
User Manual29Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. Select or clear the Enable 2.4 GHz WiFi check box.
7. Select or clear the Enable 5 GHz WiFi check box.
8. Click the SAVE button.
Your settings are saved.
Change the WiFi speed
When the extender's 2.4 GHz WiFi backhaul is connected to the root access point (root
AP), the extender's 2.4 GHz fronthaul WiFi speed is the same as the root AP's 2.4 GHz
WiFi speed. The extender cannot change its 2.4 GHz WiFi speed.
This also applies to the extender's 5 GHz WiFi speed. When the extender's 5 GHz WiFi
backhaul is connected to the root AP, the extender's 5 GHz fronthaul WiFi speed is the
same as the root AP's 5 GHz WiFi speed. The extender cannot change its 5 GHz WiFi
speed.
The following table further explains whether if the extender's 2.4 GHz or 5 GHz WiFi
speed is changeable based on which extender backhaul connection is used to connect
to the root AP.
Table 8. Extender backhaul and fronthaul WiFi connection
Is the extender's 5 GHz
fronthaul WiFi speed
changeable?
Is the extender's 2.4
GHz fronthaul WiFi
speed changeable?
Which extender WiFi
backhaul is connected
to the root AP?
NoNoBoth 2.4 GHz and 5 GHz
YesNo2.4 GHz only
NoYes5 GHz only
YesYesNo connection
To change the extender's WiFi speed:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
User Manual30Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. From the 2.4 GHz Network or 5 GHz Network WiFi Speed menu, select a speed.
7. Click the SAVE button.
Your settings are saved.
Use WPS to add a computer to the
extender’s WiFi network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s
network without entering the WiFi network passphrase or key. Instead, you use a WPS
button or enter a PIN to connect.
If you use the push button method, the WiFi device that you are trying to connect must
include a physical button or a software button. If you use the PIN method, you must
know the PIN of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on
the extender network and generates a random passphrase. You can view this passphrase
on the WiFi Settings page (for more information, see View WiFi settings on page 26).
User Manual31Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
Use WPS with the push button method
For you to use the push button method to connect a WiFi device to the extender’s WiFi
network, the WiFi device that you are trying to connect must include a physical WPS
button or an onscreen WPS button that you can click.
To use WPS to add a WPS-enabled device to the extender’s WiFi network:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
The Connected Devices (WPS) page displays.
6. Leave the Push Button (recommended) radio button selected.
7. Click the WPS button.
For two minutes, the extender attempts to add the computer or WiFi device to its
WiFi network.
8. Within two minutes, go to the computer WiFi device and press or click its WPS
button.
9. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
User Manual32Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
Use WPS with the PIN method
To use the PIN method to connect a WiFi device to the extender’s WiFi network, you
must know the PIN of the WiFi device that you are trying to connect.
To add a computer or WiFi device to the extender’s WiFi network:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
The Connect Devices (WPS) page displays.
6. Select the PIN Number radio button.
The page adjusts.
7. Type the PIN of the WiFi device in the field.
8. Click the NEXT button.
For four minutes, the extender attempts to find the computer or WiFi device.
9. Within four minutes, go to the WiFi device and use its WPS software to join the WiFi
network.
User Manual33Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
10. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
Deny access to a computer or WiFi device
By default, access control is disabled so that it is easy for you to connect to the extender’s
WiFi networks.
You can deny network access to specific computers and WiFi devices based on their
MAC addresses. Each network device is assigned a MAC address, which is a unique
12-character physical address, containing the hexadecimal characters 0–9, a–f, or A–F
only, and separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC
address is on the label of the WiFi device. If you cannot access the label, you can display
the MAC address using the network configuration utilities of the computer. You might
also find the MAC addresses on the Connected Devices page (see View connected
devices on page 25).
To use WiFi access control to deny access:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
User Manual34Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
5. Select Settings > Connected Devices.
The Connected Devices page displays.
6. In the WiFi Devices section, select the Enable Access Control check box.
The WiFi devices table displays the names and MAC addresses of WiFi devices that
are connected to the extender.
7. Select the Deny check box for the device.
8. Click the SAVE button.
Your settings are saved and that device cannot connect to the extender’s WiFi
network.
Set up an access schedule
You can control access by all users during specific periods of the day. You can set up
an access schedule that prevents the extender’s wireless or wired connection to the
router based on the times that you set.
To set up an access schedule:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
User Manual35Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
5. Select Do More > Access Schedule.
The Access Schedule page displays.
6. Select the Access Schedule On radio button.
The page adjusts.
7. In the Days menu and the Time menu, select the day and time when you want to
disable the extender’s wireless or wired connection to the router.
8. Click the Add Time button to add the time that you specified to the Scheduled Times
table.
9. Click the SAVE button.
Your settings are saved.
Change the extender’s device name
The default device name is the extender's model number.
To change the extender’s device name:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
User Manual36Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. Scroll down and click the IP Address heading.
The page expands.
7. In the Device Name field, type a name.
8. Click the SAVE button.
Your settings are saved.
Set up the extender to use a static IP address
The extender comes set up to use a dynamic IP address, which is the correct setting for
most home networks.
To set up the extender to use a static IP address:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
User Manual37Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
6. Scroll down and click the IP Address heading.
The page expands.
By default, the Dynamically get IP Address from Router radio button is selected.
7. Select the Use Static IP Address radio button.
8. Complete the fields to specify the IP network IP addresses.
9. Click the SAVE button.
Your settings are saved.
Adjust the WiFi coverage
You can adjust the extender output power percentage and range of your extended WiFi
network. If you select a low output power percentage, the extender's WiFi range will
be shorter, and the extender uses less power. If you select a high output power
percentage, the extender's WiFi range will be longer, and the extender uses more
power.
For a smaller coverage area, choose a lower output power percentage. For a larger
coverage area, select a higher output power percentage.
To adjust the WiFi coverage:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
User Manual38Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Do More > WiFi Coverage.
The WiFi Coverage page displays.
6. Select a WiFi Output Power radio button
7. Click the SAVE button.
Your settings are saved.
Enable FastLane technology
Get the most out of your HD entertainment with FastLane technology. With FastLane
technology, the extender connects to your router using one band and connects to your
devices using another band. Because a band is dedicated to each function, performance
is enhanced.
If all your devices and your WiFi router support only the 2.4 GHz band, or all your devices
and your WiFi router support only the 5 GHz band, do not enable FastLane Technology.
To activate FastLane mode:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
User Manual39Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Do More > FastLane.
The FastLane Technology page displays.
6. Select the FastLane Technology radio button.
The page adjusts and displays two more radio buttons.
7. Select a radio button:
• Router-to-Extender in 2.4 GHz only and Extender-to-Device in 5 GHz only.
The 5 GHz band is used to connect the extender to the WiFi devices, and the 2.4
GHz band is used to connect the extender to the WiFi router. Use this mode if the
devices that you want to use for gaming and streaming support the 5 GHz band,
but your WiFi router supports the 2.4 GHz band.
• Router to Extender in 5 GHz only and Extender-to-Device in 2.4 GHz only.
The 2.4 GHz band is used to connect the extender to the WiFi devices, and the 5
GHz band is used to connect the extender to the WiFi router. Use this mode if
your WiFi router supports the 5 GHz band, but the devices that you want to use
for gaming and streaming support the 2.4 GHz band.
8. Click the SAVE button.
Your changes are saved.
Configure a router with advanced MAC
settings to work with your extender
If you enabled a WiFi MAC filter, WiFi access control, or access control list (ACL) on your
router, when a WiFi device connects through the extender to your router, the MAC
address of the WiFi device shown on the router is translated to another MAC address.
If your router’s MAC filter, WiFi access control, or ACL is enabled, the WiFi device
connects to the extender but cannot get an IP address from the extender and cannot
access the Internet.
To allow the WiFi device to receive an IP address from the extender and access the
Internet, you must provide translated MAC address to the router.
User Manual40Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
To add a translated MAC address to your router and reserve an IP address for your
extender
1. Log in to your router and disable the MAC filter, WiFi access control, or ACL.
For more information about how to disable your router’s MAC filter, WiFi access
control, or ACL, see your router’s documentation.
2. Power on the extender and connect all of your WiFi devices to the extender.
3. Make sure that the Router Link LED remains lit.
4. Log in to your extender:
a. Launch a web browser from a computer or mobile device that is connected to
your extender network.
b. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
A login page displays.
c. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
5. Select Settings > Connected Devices.
The Connected Devices page displays the MAC addresses and virtual MAC addresses
for computers and WiFi devices that are connected to the extender network.
6. On the router, add the extender’s virtual MAC address and all the virtual MAC
addresses connected to the extender network to your router’s MAC filter table.
Note: To reserve a specific IP address for the extender, you must specify the first
virtual MAC address that displays for your extender’s 2.4 GHz or 5 GHz network in
your router’s IP reservation table. (The first virtual MAC address that displays for your
extender’s 2.4 GHz and 5 GHz networks is the same.)
7. Enable the router’s MAC filter, wireless access control, or ACL.
User Manual41Extender Network Settings
AX1800 4-Stream WiFi Mesh Extender
4
Maintain and monitor the extender
This chapter covers the following topics:
• Change the extender login user name and password
• Turn password protection off and on
• Recover a forgotten user name or password
• Automatically adjust for daylight saving time
• Manually set the extender clock
• Back up and manage the extender configuration
• Back up the configuration settings
• Restore the configuration settings
• Return the extender to its factory default settings
• Update the extender firmware
• Restart the extender from the extender web interface
• Turn the LEDs On or Off
42
Change the extender login user name and
password
You can change the admin user name and password that you use to log in to the
extender.
To change the extender's login user name and password:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Password.
The Password Settings page displays.
6. To change the admin user name, enter a new user name in the New User Name
field.
Your admin user name can be a name or email address.
7. To change the admin password, enter a new password in the New Password field
and the Verify Password field.
8. Select questions and enter the answers.
User Manual43Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
9. Click the SAVE button.
Your settings are saved.
Turn password protection off and on
We recommend that you leave password protection on to help keep your network
secure. You can turn password protection off and on.
To turn password protection off or on:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Password.
The Password Settings page displays.
6. Select the Password Off or Password On radio button.
7. Click the SAVE button.
Your settings are saved.
User Manual44Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
Recover a forgotten user name or password
If you changed the password that you use to access the extender and you set up
password recovery, you can recover your password if you lose it.
To recover your password that you use to access the extender:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Click the Username & Password Help link.
A page displays requesting the answers to your security questions.
If you forgot the answers to your security questions, restore the extender’s factory
settings and set up your login credentials again. See Return the extender to its factory
default settings on page 50.
4. Enter the saved answers to your security questions.
5. Click the NEXT button.
Your admin user name address and password are displayed.
6. Click the BACK button.
A login page displays.
7. Log in to the extender.
User Manual45Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
Automatically adjust for daylight saving time
To set up the extender to automatically adjust for daylight saving time:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Do More > Access Schedule.
The Access Schedule page displays.
6. Select the Automatically adjust for daylight savings time check box.
7. Click the SAVE button.
Your settings are saved.
Manually set the extender clock
If you turned on the access schedule, you can set the extender clock. The extender clock
makes sure that the WiFi access schedules are accurate.
User Manual46Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
To manually set the extender clock:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Do More > Access Schedule.
The Access Schedule page displays.
6. In the Extender Clock section, select the Manual radio button.
7. To specify the time, complete the fields or click the Sync Clock button to synchronize
the extender time to the time on the computer or mobile device that you are using.
8. Click the SAVE button.
Your settings are saved.
Back up and manage the extender
configuration
When the extender works correctly after initial setup, we recommend that you back up
the extender configuration settings. After you back up the settings, if you change the
User Manual47Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
extender configuration settings but are not content with the new settings, you can restore
the extender configuration to the backed-up settings.
Back up the configuration settings
You can back up the configuration file of the extender.
To back up the extender configuration settings:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Other.
The Other Settings page displays.
6. Click the BACKUP button.
Your browser extracts the configuration file from the extender. The backup file uses
a.cfg extenstion.
7. If your browser is not set up to save downloaded files automatically, locate where
you want to save the file.
8. Click the OK button.
The extender configuration settings are backed up.
User Manual48Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
Restore the configuration settings
You can restore the configuration settings of the extender to a previously saved
configuration file.
To restore the extender configuration settings:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Other.
The Other Settings page displays.
6. Click the BROWSE button.
7. Locate and select the previously saved backup file.
The backup file uses a .cfg extension.
CAUTION: After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender until it finishes
restarting.
User Manual49Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
8. Click the RESTORE button.
A confirmation pop-up window opens.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.
Return the extender to its factory default
settings
Under some circumstances (for example, if you lose track of the changes that you made
to the extender settings), you might want to erase the configuration and reset the
extender to factory default settings.
To reset the extender to factory default settings, you can either use the Reset button
on the back panel or log in to the extender and reset it.
Use the Reset button
CAUTION: This process erases any settings that you configured in the extender.
To use the Reset button to return the extender to its factory default settings:
1. Insert a straightened paper clip into the hole of the Reset button and hold it for
about seven seconds.
2. Release the button.
CAUTION: Do not try to go online, turn off the extender, shut down the computer,
or do anything else to the extender until it finishes restarting!
The extender resets and restarts. This process takes about one minute.
Log in and reset the extender to factory settings
CAUTION: This process erases any settings that you configured in the extender.
User Manual50Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
To log in to the extender and reset the extender’s factory settings:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Other.
The Other Settings page displays.
CAUTION: After you click the RESET button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender until it finishes
restarting.
6. Click the RESET button.
A confirmation pop-up window opens.
7. Confirm your decision.
The extender returns to its factory settings and restarts. This process takes about
one minute.
User Manual51Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
Update the extender firmware
You can log in to the extender and check to see if new firmware is available, or you can
manually load a specific firmware version to your extender.
Check for new firmware and update the extender
Unless you changed the settings in the Firmware Update page previously, the extender
is set up to check for new firmware automatically at login.
To check manually for new firmware and, if available, update the firmware:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Firmware Update.
The Firmware Update page displays.
6. Click the CHECK ONLINE button.
7. If new firmware is available, follow the onscreen prompts to update the firmware.
User Manual52Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
Note: You might need to unzip the firmware file. The firmware update process takes
about two minutes.
Manually upload firmware to the extender
If you want to upload a specific firmware version, follow these instructions.
To manually upload a firmware file to your extender:
1. Download the firmware file for your extender from the NETGEAR Download Center,
save it to your desktop, and unzip the file if needed.
Note: The correct firmware file uses an .img or .chk extension.
2. Launch a web browser from a computer or mobile device that is connected to your
extender network.
3. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
4. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
5. If your browser displays the Menu icon , click it.
The extender menu displays.
6. Select Firmware Update.
The Firmware Update page displays.
7. Click the BROWSE button.
8. Locate and select the new firmware file.
User Manual53Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
The firmware file name ends with a .img or .chk extension.
9. Click the UPLOAD button.
CAUTION: After you click the UPLOAD button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender until it finishes
restarting.
The firmware update starts and the extender restarts. The firmware update process
takes about two minutes.
Restart the extender from the extender web
interface
You can log in to the extender and restart it. When the extender restarts, all computers
and WiFi devices that are connected to its WiFi network are automatically disconnected.
To restart the extender from the extender web interface:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
User Manual54Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
5. Select Settings > Other.
The Other Settings page displays.
6. Click the RESTART button and click the Yes button to confirm.
The extender restarts, which takes about two minutes.
Turn the LEDs On or Off
If you turn the LEDs off, the Power LED remains on.
To turn the LEDs on or off:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•If you enabled the One WiFi Name feature, enter one of the following URLs:
-Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 59.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Do More > LED On/Off.
The LED On/Off page displays.
6. Select the ON or OFF radio button.
•To turn the LEDs on, select the ON radio button.
•To turn the LED off, select the OFF radio button.
User Manual55Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
7. Click the SAVE button.
Your settings are saved.
User Manual56Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
FAQs
This section provides answers for difficulties you might experience with the extender.
The web browser setup keeps asking me for my network password (passphrase)
or security key, and I am sure that I entered the correct password. What can I do?
The extender is probably placed at the borderline of the range covered by the router
or access point. To improve your signal strength, move your extender closer to your
router and make sure that the Router Link LED lights solid white or amber.
The LED lights as follows:
•Solid white. Best connection
•Solid amber. Good connection
•Solid red. Poor connection
•Off. No connection
Can I set up the extender in extender mode if I connect it to the router or access
point with an Ethernet cable?
No. The extender is designed to connect wirelessly to the router or access point if it is
in extender mode. If the extender is in access point mode, you can connect it to the
router or access point with an Ethernet connection. For more information about access
point mode, see Use the extender in access point mode on page 18.
I am connected to NETGEAR_EXT and launched a browser but I don't see the
NETGEAR installation assistant. What should I do?
Try these troubleshooting steps:
•Relaunch the web browser and enter http://www.mywifiext.net/ in the address
field.
•Clear your web browser cache and history, and then try vising
http://www.mywifiext.net again.
•If you are installing the extender as an access point, make sure that you are connecting
your computer or WiFi device to the extender through a WiFi connection instead of
an Ethernet connection.
•Make sure that your computer is set up to use DHCP (most are).
I forgot my admin user name address and password. What can I do?
On the login window, click the Username & Password Help link to answer the security
questions that you set up during the initial setup. For more information, see Recover a
forgotten user name or password on page 45.
User Manual58FAQs and troubleshooting
AX1800 4-Stream WiFi Mesh Extender
To restore factory settings:
1. Use a sharp object such as a pen or paper clip to press and hold the Reset button
on the extender for seven seconds until the Power LED blinks amber.
2. Release the Reset button and wait for the extender to reboot.
The extender resets and returns to the factory default settings.
Find the Extender’s IP address
If your extender and router use the same WiFi network name (SSID) and you want to
log in to your extender using an Android device, you must use the extender’s IP address.
You can log in to your router to find your extender’s IP address. If you own a NETGEAR
router, use the following procedure to find the extender’s IP address. If you do not own
a NETGEAR router, see your router's documentation.
Note: The following instructions might not apply to your NETGEAR router. For more
information, see your NETGEAR router’s user manual.
To log in to your extender and find your extender’s IP address:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net/.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
A list of devices connected to your router displays.
5. Find your extender in the list and note your extender’s IP address.
User Manual59FAQs and troubleshooting
AX1800 4-Stream WiFi Mesh Extender
Cannot Connect to the Extender
If you cannot connect to the extender, determine what prevents you from connecting:
•If you cannot access the extender settings using the Nighthawk app, you can access
the extender using the extender web interface at http://www.mywifiext.net/, see
Cannot access mywifiext.net on page 61 for more information.
•If you forgot your user name or password, click the Username & Password Help
link. For more information, see FAQs on page 58.
•If your browser displays an error page, include http:// in the address field of your
browser by typing http://www.mywifiext.net/.
•If you cannot get a WiFi connection working, you can use an Ethernet cable to connect
your computer to the extender. Then log in to the extender web interface
(http://www.mywifiext.net) and see if your extender has any connection issues.
Cannot Join a WiFi Network and Receive an
Error Message
To join a WiFi network, you must know its WiFi network name (also called the SSID) so
that you can select it. If the network is secure, you must know the WiFi password (also
called the passphrase or key). If the extender does not connect to the network that you
select, the cause might be one of the following:
•It is possible that you typed the WiFi network name or WiFi passowrd incorrectly.
Use Smart Setup (see Run the Smart Setup installation on page 20) to select a WiFi
network and retype the WiFi password. The WiFi password is case-sensitive. For
example, PASSWORD25 is not the same as Password25 or password25.
•If the extender cannot detect your WiFi network, check to see if your WiFi network
is still working. Make sure that the WiFi router is turned on. If possible, move the
extender closer to the WiFi router.
•If the extender Router Link LED is red, the WiFi connection between the WiFi router
and the extender is poor. You can establish the best connection with a clear line of
sight between the extender and the WiFi router. Make sure that no physical obstacles
exist between the extender and the WiFi router, and try to move the extender closer
to the WiFi router.
If you use Smart Setup, and the extender does not connect to the WiFi router, does not
connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup
displays a message to notify you that the extender is not configured.
User Manual60FAQs and troubleshooting
AX1800 4-Stream WiFi Mesh Extender
To run Smart Setup again, click the YES button. To manually configure the extender,
click the NO, CONFIGURE MANUALLY button.
Cannot access mywifiext.net
When you try to access http://www.mywifiext.net/ to set up your extender, you might
receive an error message that says you are not connected to the extender's WiFi network.
This website is not a regular Internet website. It is a local web address used to log in to
the extender web interface and view the extender settings.
Your computer or mobile device must be connected to your extender network to access
http://www.mywifiext.net/.
Try these troubleshooting tips to connect to http://www.mywifiext.net/:
•If you’re trying to access http://www.mywifiext.net/ for the first time to set up your
extender, see Connect with the NETGEAR installation assistant on page 17 and follow
the instructions.
•Launch a web browser and enter the extender’s default IP address, which is
192.168.1.250.
If this IP address does not work, it is possible that your extender’s IP address might
have changed. You can log in to your router to view your extender’s IP address. For
more information, see Find the Extender’s IP address on page 59.
•If your extender and router use the same WiFi network name (SSID), enter
http://<extender’s IP address> (for example, http://192.168.1.3).
For more information about how to find your extender’s IP address, see Find the
Extender’s IP address on page 59.
•Clear your web browser’s cache and browsing history and try again.
For more information, see the help content for your web browser.
•Try using another web browser.
•Assign a static IP address to your computer.
Before you change any network settings, note your current Default gateway (Windows)
or Router (Mac) address. Use the IP address 192.168.1.249 and the subnet mask
255.255.255.0.
For more information, see your computer’s documentation.
User Manual61FAQs and troubleshooting
AX1800 4-Stream WiFi Mesh Extender
Cannot connect to extender using the
Nighthawk app
You can use the Nighthawk app to set up your extender and access your extender
settings.
If the Nighthawk app is unable to connect to your extender, try these troubleshooting
tips:
•If you're setting up your extender for the first time, make sure your mobile device is
connected to the extender WiFi network called NETGEAR_EXT.
•If you already set up your extender, make sure your mobile device is connected to
the new extender WiFi network that was set.
Your extender's WiFi network and password is the same as your router's WiFi network
and password.
•If you already set up your extender and your extender is connected to a Nighthawk
router, you can access your extender settings through your router's Network Map
in the Nighthawk app.
Launch the Nighthawk app, tap the Network Map on the router dashboard, and
then tap the extender icon.
User Manual62FAQs and troubleshooting
AX1800 4-Stream WiFi Mesh Extender
Factory Default Settings
To reset the extender to factory default settings, you can use the Reset button on the
side panel or you can log in and click the onscreen RESET button. For more information,
see Return the extender to its factory default settings on page 50.
The following table shows the factory default settings.
Table 9. Factory default settings
Default SettingsFeature
EnabledSmart Setup
EnabledWiFi communication
NETGEAR_EXTWiFi network name (SSID)
DisabledSecurity
Auto1
Transmission speed
Varies by regionCountry/region
802.11a/b/g/n/acOperating mode
Max 600 MbpsData rate in the 2.4 GHz band
Disabled by default
(When enabled the max data rate is 1200 Mbps)
Data rate in the 5 GHz band
Server and client are enabledDHCP
1Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual
data throughput rate.
User Manual64Supplemental Information
AX1800 4-Stream WiFi Mesh Extender
Technical and Environmental Specifications
The following table shows the technical and environmental specifications.
Table 10. Technical specifications
Technical Specifications
Data and routing protocols: TCP/IP, DHCP server and client, DNS relayNetwork protocol and
standards compatibility
•Dimensions: 9.5 x 6.7 x 2.5 in (241.7 x 169.5 x 63.4 mm)
•Weight: 1.1 lb (504.4 g)
Physical specifications
•Operating temperature: 32° to 104°F (0° to 40°C)
•Operating humidity: 90% maximum relative humidity, noncondensing
Environmental
•Local: Two 10/100/1000 Mbps Ethernet ports
•802.11ac/n/a/g/b and 802.11k
Interface
User Manual65Supplemental Information
AX1800 4-Stream WiFi Mesh Extender