Newline TT-8618VN User Manual
Displayed below is the user manual for TT-8618VN by Newline which is a product in the Signage Displays category. This manual has pages.
Related Manuals
User Manual
-V1.0-
i
Contents
Safety Instruction ........................................................................................................................... iv
About This Document ........................................................................................................................ 1
1 Overview .......................................................................................................................................... 2
1.1 Introduction .................................................................................................................................................................. 2
1.2 Parts .............................................................................................................................................................................. 3
1.3 Ports .............................................................................................................................................................................. 4
1.4 Remote Control ............................................................................................................................................................. 7
1.5 Temperature Control ..................................................................................................................................................... 9
2 Installation Guide .......................................................................................................................... 10
2.1 Safety Precautions ...................................................................................................................................................... 10
2.2 Installation Precautions ............................................................................................................................................... 11
2.3 Installation .................................................................................................................................................................. 13
2.4 Installing the Internal PC (Optional) ........................................................................................................................... 14
2.5 Installing Newline Assistant ....................................................................................................................................... 15
3 Getting Started .............................................................................................................................. 16
3.1 Power On .................................................................................................................................................................... 16
3.2 Power Off.................................................................................................................................................................... 17
3.3 Calibration .................................................................................................................................................................. 18
4 Operating the Interactive Display ............................................................................................... 22
4.1 Start Screen ................................................................................................................................................................. 22
4.2 Home .......................................................................................................................................................................... 22
4.3 System Settings ........................................................................................................................................................... 27
4.3.1 Network Settings ..................................................................................................................................................... 27
4.3.2 Language and Input Method Settings ...................................................................................................................... 28
4.3.3 Storage ..................................................................................................................................................................... 31
4.3.4 Applications ............................................................................................................................................................. 31
4.3.5 Date and Time Settings ............................................................................................................................................ 32
4.3.6 Power ON/OFF Setting ............................................................................................................................................ 34
4.3.7 Tool Bar Setting ....................................................................................................................................................... 36
4.3.8 Input/Output Setting ................................................................................................................................................ 37
ii
4.3.9 Logo and Wallpaper Setting ..................................................................................................................................... 37
4.3.10 Smart Eye Protection ............................................................................................................................................. 38
4.3.11 Newline Extension ................................................................................................................................................. 38
4.3.12 About ..................................................................................................................................................................... 39
4.4 Windows ..................................................................................................................................................................... 39
4.5 Connection .................................................................................................................................................................. 40
4.6 Whiteborad ................................................................................................................................................................. 42
4.6.1 Whiteboard Mode .................................................................................................................................................... 42
4.6.2 Whiteboard Functions .............................................................................................................................................. 44
4.6.3 Page Operations ....................................................................................................................................................... 49
4.7 Add Shortcut ............................................................................................................................................................... 51
4.7.1 Add Shortcuts to Home Page ................................................................................................................................... 51
4.7.2 Add Quick Start Windows Programs in Smart System ............................................................................................ 53
4.8 Gadget ......................................................................................................................................................................... 55
4.9 File Management ........................................................................................................................................................ 56
4.9.1 File Viewer Page ...................................................................................................................................................... 56
4.9.2 File Preview ............................................................................................................................................................. 56
4.9.3 File Filtering ............................................................................................................................................................ 57
4.9.4 File Search ............................................................................................................................................................... 58
4.9.5 File Operation .......................................................................................................................................................... 58
4.10 End Meeting.............................................................................................................................................................. 59
4.10.1 Manually End Meeting .......................................................................................................................................... 59
4.10.2 Automatically End Meeting ................................................................................................................................... 61
5 Quick Setting Menu ................................................................................................................... 62
6 Serial Port Control ........................................................................................................................ 64
7 FAQ & Troubleshooting ............................................................................................................... 69
8 Specifications ................................................................................................................................. 71
9 More Information ......................................................................................................................... 74
Welcome to the world of TRUTOUCH.
Thank you for choosing the TRUTOUCH VN Series interactive display. Please use this document to get the
most out of your display.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
⚫ Reorient or relocate the receiving antenna.
⚫ Increase the separation between the equipment and receiver.
⚫ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
⚫ Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
The symbol of the crossed out wheeled bin indicates this product should not be placed in
municipal waste. Instead, dispose of waste equipment by taking it to a designated collection
point for electrical and electronic equipment recycling.
Safety Instruction
For your safety, please read the following instruction before you use the product. Serious injury or property
damage may be caused by improper operations. Do not try to repair the product on your own.
WARNING
Disconnect the product from power supply immediately if major failures occur.
Major failures include the following:
⚫ Smoke, peculiar smell or abnormal sound is discharged from the product.
⚫ No image or sound is displayed, or the image error occurs.
In the preceding scenarios, do not continue to use the product. Disconnect power supply
immediately and contact professional staff for troubleshooting.
Do not drop liquid, metal or anything combustible into the product.
⚫ If any liquid or metal is dropped into the product, power off the product and disconnect the power
supply, then contact professional staff for solutions.
⚫ Pay attention to children when they are close to the product.
Put the product on a stable surface.
An unstable surface includes and is not limited to an inclined plane, a shaky stand, desk or platform,
which might cause turnover and damage.
Do not open the cover or change the product on your own.
High voltage components are installed in the product. When you open the cover, high voltage,
electric shock, or other dangerous situations may occur.
If inspection, adjustment, or maintenance is required, contact the local distributor for help.
Use the specified power supply.
⚫ To prevent the product from being damaged, do not use any cables other than the one provided
with the product.
⚫ Use a three-wire socket and ensure that it is properly grounded.
⚫ Pull out the power plug from the socket if the product is not used for a long period.
Clean the dust and metal on the power plug regularly.
⚫ Fire or electric shock may be caused if the product is powered on, when you are cleaning.
⚫ Pull out the power plug before cleaning it with a dried cloth.
The voltage/current of the rear power output port is 5 V/2 A (maximum). Purchase the power
code/AC adapter according to customer needs. The port can be used for Newline Android box
X10D. Please do not connect any products with different power requirement. Otherwise, it may
WARNING
cause damage to products or fire.
Do not put items on the top of the product.
⚫ Do not put items, such as a container for liquid (a vase, flowerpot, cosmetics or liquid medicine)
on the top of the product.
⚫ If any water or liquid is spilled on the product, a short circuit may occur and cause fire or electric
shock.
⚫ Do not walk on or hang any items on the product.
Do not install the product in an improper place.
⚫ Do not install the product in humid places, such as the bathroom, the shower room, near windows,
or outdoor environments that experience rain, snow or other harsh weather. Avoid installation
near hot spring vapor. The preceding environments may cause faults in the product or electric
shock under extreme conditions.
⚫ Do not put exposed fire source, such as an ignited candle, on the product.
Pull out the power plug during thunderstorms.
⚫ Do not touch the product during a lighting storm to avoid electric shock.
⚫ Install or place components that supply high enough voltage to cause personal injury out of the
reach of children.
Do not touch the power cable with wet hands.
CAUTION
Do not install the product in high temperature environments.
⚫ Do not install the product near a heat source, such as a radiator, a heat reservoir, a stove or other
heating products.
⚫ Do not expose the product to direct sunlight, which may cause high temperatures and subsequent
faults in the product.
For transport:
⚫ Pack the product for transport or maintenance by using the cartons and cushioning material
provided with the product.
⚫ Vertically move the product during transport. The display or other components are easily broken
if the product is moved by an improper way.
⚫ Before you move the product, disconnect all external connections and separate all toppling
preventing products. Move the product carefully to prevent it from being hit or squeezed,
especially the display, which may cause injury if broken.
CAUTION
Do not cover or block up any vents on the product.
⚫ Any overheated components may cause fire, damage the product, and shorten the service life.
⚫ Do not lay the product down where the venting surface will be covered.
⚫ Do not install the product on a carpet or cloth.
⚫ Do not use a cloth such as table cloth to cover the product.
Use the battery correctly.
⚫ Galvanic corrosion, electric leakage, and even fire may be caused by improper battery usage.
⚫ It is recommended to use the designated type of battery and install the battery by correct
electrodes (positive and negative).
⚫ Do not install and use a new battery with a used one.
⚫ Take out the batteries if the remote control is not used for a long period.
⚫ Do not expose the batteries to overheated environments such as sunlight and firing.
⚫ Dispose of the used batteries based on your local regulations.
Do not damage the power cable.
⚫ Do not damage, change, twist, bend, or forcibly drag the power cable.
⚫ Do not put weights (such as the product itself) on the power cable.
⚫ Do not forcibly drag the cable when you pull out the power plug. If the power cable is damaged,
please contact the local distributor to repair or replace it.
⚫ The power cable in the accessory box is for this product only. Do not use it on other products.
Additional advice:
⚫ Use the product in an environment with comfortable lighting. It is harmful to your eyes to watch
in a too bright or too dark environment.
⚫ Relax your eyes after a period of time for watching.
⚫ Keep sufficient distance from the product to protect your eyes and prevent eyestrain.
⚫ Adjust the volume to an appropriate level, especially at night.
⚫ Use amplifier equipment as the audio input source with caution. If you must use amplifier
equipment, the input power should not exceed the maximum of speaker power. Otherwise, the
speaker can become overpowered and damaged.
About USB port.
Front USB 2.0 ports and rear USB 3.0/USB 2.0 ports switch connections based on signal sources. If
the current signal source is reading the data from an external product connecting to the port, please
switch the signal source after the data reading is complete. Otherwise, the data or product may be
damaged.
Screen glass is broken or falls off.
⚫ In case of screen glass breakage, keep all personnel 3 meters away from the screen to ensure
safety.
⚫ Do not perform any installation or disassembly when the screen glass is broken or falls off.
CAUTION
Keep away from the product when you use a radio.
The product complies with the international EMI standard to pervent radio interference. However,
interference may still exists and causes noise in the radio.
If noise occurs in the radio, try the following solutions.
⚫ Adjust the direction of the radio antenna to avoid the interference from the product.
⚫ Keep the radio away from the product.
1
About This Document
This document describes multiple functions, instructions, and notes about the product.
Symbols are used in this document to indicate operations that need particular attention. The
symbols are defined as follows:
Provides additional information to supplement
operation in the main text.
Provides tips for operation.
Indicates a potentially hazardous situation that, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
WARNING
Indicates a hazard with risk that, if not avoided, could
result in death or injury.
2
1 Overview
1.1 Introduction
The Interactive Touch display adopts the advanced touch technology and All in One design,
and integrates video, audio, touch, writing, and multi-media presentation functions. This
product does not require additional products, installation and wiring, and commissioning and
maintenance to function.
Dedicated smart system is customized as a meeting assistant. It can meet requirements of
various meeting modes, implementing convenient comments on local documents, viewing
multi-media files, conducting multi-party remote video and audio meetings, managing local
files, and improving the meeting experience and work efficiency.
⚫ All-in-one design facilitates operation and saves complex hardware and software setting.
⚫ 4K HD LED screen uses full lamination technology and high gamut backlight, which
completely avoids light refraction and ghosting problems and enables a clear, light and
thin screen.
⚫ Provide perfect writing experience, enable writing mode to be switched over in the
Windows and smart systems. With a feel like writing on paper, meeting quality is
significantly improved.
3
1.2 Parts
Front View
Rear View
TT-8618VN/ TT-7518VN:
4
TT-6518VN:
1
Speakers
6
Pen/Eraser Tray Cover
2
Front Buttons
7
Power Switch
3
Front Ports
8
Power Supply Plug
4
Button Cover
9
Internal PC Port (OPS)
5
Pen/Eraser Tray
10
Rear Ports
1.3 Ports
Front Ports
CAUTION
Front USB 2.0 ports and rear USB 3.0/USB 2.0 ports switch connections based on signal
sources. If the current signal source is reading the data from an external product connecting
to the port, please switch the signal source after the data reading is complete. Otherwise, the
data or product may be damaged.
5
Rear Ports
WARNING
The voltage/current of the rear power output port is 5 V/2 A (maximum). Purchase the power
code/AC adapter according to customer needs. The port can be used for Newline Android box
X10D. Please do not connect any products with different power requirement. Otherwise it may
cause the damage to products or fire.
6
You are advised to connect X10D to HDMI rear 2.
7
Front Buttons
Buttons
Operations
Functions
Power
Short press
Power on/off
Indicator LED status:
⚫ Steady on red: shut down mode
⚫ Steady on green: working state
Home
Short press
Go to the home page
Return
Short press
Return to the last menu/Exit
Menu
Short press
Open the menu
VOL-
Short press
Decrease the sound volume
Long press for more
than 1 second
Decrease the sound volume continuously
VOL+
Short press
Increase the sound volume
Long press for more
than 1 second
Increase the sound volume continuously
1.4 Remote Control
Carefully read the following instructions before using the remote control to avoid possible
faults:
⚫ Do not drop or damage the remote control.
⚫ Do not spill water or other liquids on the remote control.
⚫ Do not place the remote control on a wet object.
⚫ Do not place the remote control directly under sunlight or near an overheating heat source.
8
Buttons
Functions
Power On/Off
Switch Source to Internal PC
Mute/Unmute Audio
Freeze the Current Screen, Click Again to Exit Freeze Function.
Up/Down/Left/Right
Confirm/OK
Return to Previous/Exit
9
Buttons
Functions
⚫ Short Press: Go to the Home Page
⚫ Long Press: View Currently Running Applications
Take a Screenshot
Decrease the Sound Volume
Increase the Sound Volume
Open the System Settings
Page Up
Page Down
Zoom In
Zoom Out
Switch Source to HDMI Front
Switch Source to HDMI Rear 1
Switch Source to HDMI Rear 2
Switch Source to HDMI Rear 3
Toggle Display Backlight Mode (including Auto, Standard and EnergyStar
mode)
Switch Source to DisplayPort
Menu
Open the Display Menu or External Source Menu.
1.5 Temperature Control
In certain special installation or operation environments, the ventilation condition of the
screen is poor and the heat dissipation efficiency is low. As a result, the internal temperature
can rise. When the internal temperature sensor detects that the temperature has reached the
threshold, the system will go to shut down mode to avoid any permanent damages to the
components caused by high temperature. Please check the device and environment, and turn
the power on again.
10
2 Installation Guide
2.1 Safety Precautions
Installation Environment
11
Installation Direction
2.2 Installation Precautions
Weight Loading
Weight of the product: 87.1 lb/39.5 kg (TT-6518VN), 111.3 lb/50.5 kg (TT-7518VN), 143.3
lb/65 kg (TT-8618VN)
⚫ When using a mobile stand, please ensure the weight of the product is less than the
loading capacity of the mobile stand.
⚫ When using the wall-mount bracket, please ensure the wall can support the weight of the
product. We recommend that the wall surface be reinforced and have a loading capacity
4 times of the weight of the product. Please consult a professional installer for
wall-mount installation.
The company does not undertake relevant legal responsibility for any problems caused by improper
operation, if the third party mobile stand, or wall-mount bracket is beyond the scope of the product.
⚫ Do not install the product where it might be hit by a door.
Vertical installation
When installing, try to keep the product vertical. The vertical tilt range allowing for
wall-mount installation is ±3 degrees. Excessive tilt angle may cause the screen glass to fall
off or the product to collapse.
12
For any problem, please contact our support desk. Our company is not responsible for any damage or
losses incurred by users if the users fails to follow the instructions.
Ventilation
Ensure adequate ventilation and/or air conditioning environment. We recommend keeping
certain distances from the side of the product to the wall or panels. Ventilation requirement is
shown in following figure.
13
2.3 Installation
The dimensions of the 4 bracket mounting holes on the back panel are VESA MIS-Fcompliant
(TT-8618VN or TT-7518VN: 800 x 400 mm/31.50 x 15.75 in; TT-6518VN: 600 x 400
mm/23.62 x 15.75 in). Please use metric M8 screws with length of 10 to 15 mm (0.40 to 0.59
in) to secure the touch display with the mounting system. Dimensions of the mounting holes
on the back panel are shown in the following figure.
C
onsult a professional installer to install the display product.
TT-8618VN/ TT-7518VN:
TT-6518VN:
14
2.4 Installing the Internal PC (Optional)
The internal PC does not support hot plugging. Therefore, you must insert or remove it when
the display is powered off. Otherwise, the display or internal PC may be damaged.
The internal PC is not configured by default. You will need to purchase the internal PC
separately. Perform the following steps to install the internal PC.
Step 1 Unscrew the M3 screws by hand to remove the internal PC shielding cover.
Step 2 Push the internal PC into the internal PC port at the rear of the display from right to left.
Step 3 Secure the internal PC to the display by using the M3 screws.
15
Step 4 Ensure the installation is correct before turning the power on again.
2.5 Installing Newline Assistant
Introduction
Newline Assistant is the tool used as a bridge between smart system and Internal PC (OPS). It
helps to add windows software to smart system as well as to protect USB data/camera when
switching between sources.
Therefore we strongly recommend users install Newline Assistant after installing the internal
PC.
Installation
Step 1 Install Internal PC correctly.
Step 2 On the Home page, click Windows. It will switch the signal source to Internal Windows
system.
Step 3 Log in to the website www.newline-interactive.com and choose Products > Software to
download the Newline Assistant installation package.
Step 4 Install Newline Assistant as instructed.
16
3 Getting Started
3.1 Power On
Step 1 Plug the power supply into the power outlet fully and plug the power connector into the side
of the product. Ensure the power is in the range of 100 V to 240 V with frequency at 50 Hz/60
Hz ± 5%. The power current must be grounded.
The power outlet should be installed near the equipment and should be easily accessible.
Step 2 Flip on the power switch located on the side of the product to “On”.
TT-8618VN/TT-7518VN:
17
TT-6518VN:
Step 3 Press the power button on the front control panel or on the remote control.
3.2 Power Off
Step 1 Power off the display in the following situations:
⚫ If there is no whiteboard data or screenshot(s), press the power button on the front
panel or the power button on the remote control to power off the display. Go to Step
3.
⚫ If there is whiteboard data or screenshot(s), store your meeting documentations before
powering off the touch screen. Otherwise, the product will delete your meeting
documentations after the meeting is complete.
Press the power button on the front panel or the power button on the remote
control. The Save meeting discussion page will be displayed as shown in the following
figure.
Step 2 Press the power button on the front panel or the power button on the remote control
again. The Warning dialog box will be displayed as shown in the following figure.
18
Step 3 In the Warning dialog box, click Cancel. You can save files if desired. After files are saved,
return to Step 2. Click Confirm, and the power indicator will turn to red.
Step 4 If you are not going to use the product for an extended period of time, we recommend you to
switch the power switch to “Off”.
⚫ If an internal PC is equipped, the internal PC and the display are powered off simultaneously when
you power off the system.
⚫ Do not forcibly disconnect the power supply of the display when the internal PC is on.
3.3 Calibration
If the cursor position has a big deviation from the actual touch point, calibration is used to
eliminate the deviation. Positioning is required in the following scenarios:
⚫ The internal PC is used.
⚫ A computer is connected through the HDMI or DisplayPort interface.
Interface operation on the Smart system does not need positioning. External products with Microsoft
Windows 7 or later versions will require positioning.
If the positioning is not correct, perform the following operations to calibrate again. The
following takes Windows 10 as an example:
Step 1 Ensure that the HDMI or DP interface and external products are connected properly.
Step 2 Select the corresponding Windows signal from the signal source menu. The Windows page
will be displayed.
Step 3 Select Tablet PC Settings on the Control Panel page.
19
Step 4 Select in the Tablet PC Settings window.
20
Step 5 Select Touch input from the option and start calibration.
Step 6 Use finger or pencil to click and hold the center of the flickering cross . Do not release it
until moves to the next positioning point. Complete the calibration process as instructed.
Step 7 After the calibration is complete, the Digitizer Calibration Tool dialog box will be displayed.
Click Yes to save calibration data.
21
⚫ To ensure writing accuracy, use the pencil or stylus included with the product for proper positioning.
⚫ Positioning errors may cause failure of touch functions of the display. In that case, please perform
positioning again.
Step 8 The Tablet PC Settings dialog box will be displayed again. Click OK. The positioning will
be complete.
22
4 Operating the Interactive Display
4.1 Start Screen
When the product is turned on, the product will show the start screen page. As shown in the
following figure.
4.2 Home
Touch the screen to start a meeting, and the product will go to the Home page. As shown in
the following figure.
23
1: Logo (Shortcut to Settings) 2: Clock (Shortcut to World Clock) 3: Date and Week
(Shortcut to Calendar) 4: Side Toolbar 5: Status Bar and Settings 6: Main Toolbar
Shortcut for Settings
Click the icon on the Home page to enter the logo & Wallpaper Setting page to
set the logo and wallpaper. The logo and wallpaper can be obtained locally or from a device
connected via the USB port, as shown in the following figure.
24
Shortcut for World Clock
Click the time icon on the Home page to enter the Time Converter page and convert the time
and zone. Click to add other time zones indicating other countries, as shown in the
following figure.
Shortcut for Calendar
Click this icon to enter the Calendar page and set schedules and synchronize with Google
calendar, as shown in the following figure.
25
Side Toolbar
The Annotation Mode/Discussion Mode/Home/Return/Windows icons are displayed by defaul
t in the toolbar at two sides of the screen. The bottom side toolbar can be customized as your
choice (The default icon is Windows). You may also hide the side tool bar at the setting or
move it up and down, shrink or expand by gestures. You may double-click the "=” to expand
or shrink the toolbar. Long press the customized icon to unfold level-2 icons.
The functions of the side toolbar are as follows:
Icon
Functions
Enter annotation mode, and click again to stop annotation and save screenshot.
Enter discussion mode.
Go to Home page.
Return to the last menu/Exit
Enter the internal PC source.
Manage currently running applications.
Slide left/right the currently running application or click × at the upper right
corner to close the application.
Enter the favorite source.
View all gadgets.
26
Status Bar and Settings
The upper right corner of the home page displays three working status icons (including USB
flash memory(s), Ethernet, and Wi-Fi), and system setting shortcut.
Icon
Functions
If USB flash memory(s) is connected to the USB port, this icon will be turned
on. For details on the wiring method of the USB port, see section "Ports”.
If the product is connected to Ethernet, the icon will be turned on. For details on
the wiring method of the wired network, see section "Ports”
If the product is connected to a wireless network, the icon will be turned on. or
details on the wiring method of the wireless network, see section "Ports”
Access the system setting page.
Main Toolbar
Icon
Functions
Switch to the internal PC source.
Enter Connection to switch to the connected product, including cabled signal
sources and wireless applications.
⚫ Cabled signal sources include HDMI Front, HDMI Rear (1 to 3), and
DisplayPort.
⚫ Wireless applications include Montage and Trucast.
Discussion provides discussion board function and screen annotation
functions.
Gadget displays all pre-installed applications, including Office viewer, Email,
Calendar, Gallery, World clock, and Calculator. Click the icon of an
application to run the application.
Open the File Manager, and you can explore on internal and external files of
the screen.
Click Add to enter Add page, you can add up to 7 shortcuts to your favorite
software, gadgets or connections to the Home page. (See more detail in “Add
Shortcuts to Home Page”)
Click End to end a meeting. Users will have the choice of saving the
discussion boards screen captures and ending the meeting. Once a meeting is
ended, all screenshots and discussion data are cleared.
27
4.3 System Settings
Enter the system setting page using one of the following methods:
⚫ Click or on the Home page.
⚫ Press on the remote control.
⚫ In the Quick Setting Menu, click the icon.
4.3.1 Network Settings
Enter the Network submenu to set a LAN, enable Wi-Fi, view network information, and
enable the Wake up via LAN function.
⚫ LAN setting: Automatically obtain the LAN IP address or set static IP address according
to requirements.
⚫ Wi-Fi: Click corresponding button to enable the Wi-Fi function.
⚫ Status: View IP address, MAC address and work time of the display.
⚫ Wake up via LAN: Click corresponding button to enable the Wake up via LAN function.
Connect the display and PC to a same LAN using cables, run the Wake up via LAN, and
search for the IP address and MAC address that match the display.
28
4.3.2 Language and Input Method Settings
Enter the Language & Input Method submenu to set language and input method.
The default input method of the system is FloatNSplit Table Keyboard Plus, and Hardware
keyboard must be enabled. If you want to switch to another language, switch the keyboard
input method via Keyboard & input methods, in addition to switching the language.
FloatNSplit Table Keyboard Plus does not support Chinese and Japanese.
29
FloatNSplit Table Keyboard Plus description:
⚫ : Drag this icon and change the size of the keyboard.
⚫ : Drag this icon to move the keyboard.
⚫ : Click this icon to switch the keyboard unfold mode.
Setting a Language
Click Language at the right side. In the Change language dialog box that is displayed, select
a language.
30
Adding an Input Method
Click Current keyboard at the right side. In the Change keyboard page, click CHOOSE
KEYBOARDS, unfold Keyboard & input methods, and click the button at the right side
according to reference to add an input method (multiple choices can be selected).
Setting an Input Method
Select an input method at the right side to set the attributes of the input method.
31
4.3.3 Storage
Enter the Storage submenu to view space distribution of the internal storage.
4.3.4 APPs
Enter the Apps submenu to view downloaded applications by type, running applications, and
all applications.
32
4.3.5 Date and Time Settings
Enter the Date & Time Setting submenu to set the date and time. Before setting the date and
time, users should click Select time zone to select local time zone.
Setting a Date
You can automatically obtain the system date or customize a date.
⚫ To automatically obtain a date, select Automatic date & time.
33
⚫ To customize a date and date format, set them in Set date and Choose date format.
Setting Time
You can automatically obtain the system time or customize time.
⚫ To automatically obtain time, select Automatic date & time.
34
⚫ To customize time and time format, set them in Set time and Use 24-hour format.
4.3.6 Power ON/OFF Setting
Enter the Power ON/OFF Setting submenu to set automatic power on/off time and the time
for the system to enter the shut down mode.
⚫ To set the automatic power on time, select Auto power on, and set the power on time in
Power on time, as shown in the following figure.
35
⚫ To set the automatic power off time, select Auto power off, and set the power off time in
Power off time, as shown in the following figure.
⚫ To set the energy saving time, click Energy saving. In the dialog box that is displayed,
set a duration after which the display enters the lock mode if the display is left
un-operated. After the display is locked, if the user does not operate the display within
120s, the display enters the shut down mode. The duration can be set to 30 MIN, 60
MIN, 90 MIN, or NEVER. You can also customize this duration and the range is 3
minutes to 480 minutes.
NEVER indicates that the automatic shut down mode function is not enabled.
36
4.3.7 Tool Bar Setting
Enter the Tool Bar submenu to set whether to display the side tool bar and icons.
⚫ Left: Click to turn on/off the left tool bar.
⚫ Right: Click to turn on/off the right tool bar.
⚫ Customized icon: Click the icon under Customized icon to display the last shortcut key
at both sides of the tool bars. If you define the shortcut key as Connection, you can set a
signal source to enter after this shortcut key is clicked in Favorite Connection.
37
4.3.8 Input/Output Setting
Enter the Input/Output Setting submenu to set the automatic power on/off function of the
consumer electronics control (CEC) device, new signal source, and resolution of image output
through the HDMI port
⚫ After the CEC auto power on function is enabled and the display is connected with the
CEC device via the HDMI port, the display automatically starts if the CEC device starts
and the display receives a CEC startup command.
⚫ After the CEC auto power off function is enabled and the display is connected with the
CEC device via the HDMI port, the CEC device automatically stops if the display stops
and the CEC device receives a CEC shutdown command.
⚫ After the New input source function is enabled, the system can automatically switch to
the display of the newly connected signal source.
4.3.9 Logo and Wallpaper Setting
Enter the Logo & Wallpaper Setting submenu to set background, lock page, or Home page
log.
On this page, click View to select a picture and automatically upload it to replace current
picture. Click Default. The logo and wallpaper are reset to Newline pictures.
38
4.3.10 Smart Eye Protection
Enter the Smart Eye Protection submenu, according to the need to open the eye. The eye
protection feature includes the image display effect, the display brightness of the white board
at the time of writing, automatically changing the display brightness of the screen and filtering
the blue light function according to the ambient brightness. The filter level can only be set if
the Bluelight filter is enabled.
4.3.11 Newline Extension
Enter the Newline Extension submenu to set external devices (Trucast, X10D, and Trucam)
to be displayed in the Cable Connection column of Connection and the wireless application
Montage to be displayed in the Wireless Connection column. Furthermore, you can set the
HDMI Rear channel to be displayed on the Trucast, X10D, or Trucam screen. If an auxiliary
39
device of our company X10D is connected, the system identifies it through the CEC signal
and automatically enables and switches to corresponding channel.
4.3.12 About
Enter the About submenu to view firmware or system version information, system upgrade,
and factory setting.
4.4 Windows
On the Home page, click Windows to enter the Internal PC source page, as shown in the
following figure. If the display is not equipped with an internal PC, "No Signal" is displayed.
40
4.5 Connection
On the Home page, click Connection to enter the connected product, including cabled signal
sources and wireless applications.
⚫ Cabled signal sources include HDMI Front, HDMI Rear (1 to 3), and DisplayPort. You
can preview the image of the corresponding signal channel. If the channel has no signal
input, No Signal will appear. You can click the selected signal source to switch to the
corresponding channel in full screen. You can also long press the signal source page and
enter remark information in the Modify remarks dialog box that is displayed. If Trucast,
Trucam, or X10D options have been enabled in Newline Extension, corresponding
channel cannot be remarked.
⚫ Wireless applications include Montage and Trucast.
Montage should be installed manually to the internal PC first. If the Montage software is not added to
the Newline assistant, the system prompts users to install Montage and add it into the Newline assistant.
For details on the addition method, see section “Add Shortcuts to Home Page”.
41
The first time you turn the display on, only the cable connections appear in Connection.
Wireless connection can be added in the Newline Extension setting. In this case, the name
and icon of the HDMI on the left cabled channel change as the Trucast application is enabled
or an external product is connected. For details on the configuration, see section “Newline
Extension”. After the setting is successful, connect the Trucast, X10D and Trucam to
corresponding HDMI ports of the display.
42
4.6 Whiteborad
The whiteboard has the following functions:
⚫ Discussion and screen annotation
On the whiteboard page, you can select pen type, width, and color to write or annotate on
the screen. You can also erase selected content or clear all contents.
⚫ Page navigation
Preview or delete pages.
4.6.1 Whiteboard Mode
⚫ Click Discussion in the main toolbar or click in the side toolbar to enter the
discussion mode, as shown in the following figure.
⚫ Click in the side toolbar or click in the discussion mode to enter the
annotation. In annotation mode it would generate a transparent layer above the screen,
and user could add the annotation on it until they exit the annotation mode.
43
SN
Icon Name
Icon Function
1
Mode Switch
Click the icon to switch between annotation mode and the
discussion mode. (See more detail in whiteboard mode
section)
2
Pen
Click to use the pen function, and the icon turns into blue.
Click and hold the icon for two seconds to set the size or
color.
3
Highlighter
Click to use the highlighter function, and the icon turns into
blue. Click and hold the icon for two seconds to set the size
or color.
4
Eraser
Click to select the eraser function, when it is selected, the
icon turns into blue. Click and hold the icon for two
seconds to set the size of eraser.
5
Clear
Clear all data in this page.
6
Undo
Back to the previous step.
7
New Page
Click to add a new page. Click and hold for two seconds to
set the color and the pattern of the new page.
8
Previous Page
Click to back to the previous page.
9
Next Page
Click to go to the next page.
10
Navigation
Click to show the page thumbnails.
11
Page Number
Shows which page is used right now.
12
Hide Smart Bar
Click to hide or show the smart bar.
44
SN
Icon Name
Icon Function
13
Cursor
Click to use the cursor to control the Internal PC or
external device.
When the function be selected, the annotation part is still
on the screen.
14
Screenshot
Click to print screen, and save the data in file management.
Click and hold the icon for two seconds to show the pop-up
windows to make users to choose if they want to save the
screenshot automatically when they leave the annotation
mode.
4.6.2 Whiteboard Functions
New Page and Settings
⚫ Create a new page
In discussion mode, click to create a new page. Up to 20 pages can be created. See
the following figure.
⚫ Page settings
Click and hold for two seconds to set the color and the pattern of the new page, as
show in the figure below.
45
Switch Whiteboard Mode
Click and in the lower left corner of the discussion mode to switch between
whiteboard modes.
⚫ : Annotation mode
The background is transparent and the real-time image of the current signal source will
be displayed. You can comment on presentation content such as office documents and
pictures as showing in the following figure.
46
⚫ : Discussion mode
The background is in mono color, as shown in the following figure. You can write
content on the page as required.
Pen Type
On the Whiteboard, two types of pens are supported: Pen and highlighter.
⚫ Pen : used to write.
⚫ Highlighter : used to highlight. Characters covered by comments are visible.
Line Size and Color
On the Whiteboard, click and hold or for two seconds to set the size and color.
You can select the line size and color for writing, as shown in the following figure.
47
Eraser
Two methods are available to erase written errors or content as follows:
⚫ Five-finger gesture: touch the screen with five fingers at the same time. A circle shows
and indicates the area for eraser. Move the circle with fingers to erase written contents.
⚫ Fist/hand back erasing: corresponding erase shape is a round with diameter 100pt.
⚫ Spot erasing: Click to clear wrong or unnecessary content. Click and hold the
icon for two seconds to set the size of eraser (S 10pt/M 30pt/L 50pt), it would be shown
by the icon, as shown in the following figure.
48
Screenshot
In annotation mode, click to save the current image as a picture. Up to 50 screenshots
can be created. Click and hold the icon for two seconds to show the pop-up windows to make
users to choose if they want to save the screenshot automatically when they leave the
annotation mode, as shown in following figure.
Pictures saved through screenshots can be viewed and obtained using the following methods:
⚫ After a meeting is complete, screenshots are saved on the Save meeting discussion page,
as shown in the following figure.
49
⚫ Click on the home page and choose Internal storage > Pictures >
Screenshots > image to view or obtain screenshots.
Clear All
On the Whiteboard page, click to show the pop-up windows to make users to choose if
they want to clear contents on current page, as shown in the following figure.
4.6.3 Page Operations
You can preview, select, and delete a created writing page.
50
Page Preview
Click at the lower right corner in the discussion mode. All pages will be displayed.
Click one page to switch to that page for more operations, as shown in the following figure.
Only 8 pages are displayed at once, and you can slide right or left by one finger to see more.
Page Selection and Deletion
On the Navigation page, you can select or delete writing pages according to requirements, as
shown in the following figure.
⚫ Click to select all pages.
⚫ Click to delete selected pages.
51
4.7 Add Shortcut
4.7.1 Add Shortcuts to Home Page
Step 1 On Home page, click the icon in the lower right corner. The interface for adding
shortcuts will be displayed.
Step 2 Click the icons on top to switch the list between Windows programs, external signal sources,
and pre-installed gadgets.
⚫ Click to view the Windows programs that the Newline Assistant uploads to the
Smart system. For details, see “Add Quick Start Windows Programs in Smart System”.
⚫ Click to view signal sources in Connection. You can set the Newline accessories
to signal sources at Newline Extensions setting.
52
⚫ Click to view Gadget applications.
Step 3 Add or delete applications on the tab.
⚫ In the list, click the icon to add it to the shortcut on the Home page. The check icon will
appear at the bottom of the shortcut icons. Up to 7 shortcuts can be added.
⚫ Tap the icon with the check mark again, the check icon will disappear and the shortcut
will be deleted from the Home page.
Step 4 At the Home page, click the shortcut icon and you can start the program/application or
change to the external signal source.
53
4.7.2 Add Quick Start Windows Programs in Smart System
Step 1 In Windows, run the Newline Assistant program and drag the software icons or folder
shortcut icons that you want to add from desktop or menu to the Newline Assistant window.
The applications added or deleted through the Windows system will be automatically updated
to the smart system until the upload progress reaches 100%. If there is an application not
updated, click in the upper right corner to manually update all icons in the Newline
assistant window to the smart system.
Only .exe file and folder are supported.
Step 2 Click to return to the Home page. Click the icon and go to shortcut setting. The
page for adding application program will be displayed.
54
Step 3 At the shortcut setting page, click icon to view all the Windows programs added by
Newline Assistant in Step 1.
By default, the Newline Assistant application is added on the tab.
Step 4 Tap the icon and add the shortcut at the Home page. Tap again and remove it.
Step 5 Return to Home page. Click the icon of an added Windows software to start the software.
55
4.8 Gadget
On the Home page, click Gadget. On the page that is displayed, all applications can be
viewed. The following figure shows applications that the system is delivered with.
Icon
Functions
Click this icon to enter the Calendar application, set schedule, and update to
Google Calendar.
Click this icon to enter the system setting page.
Click this icon to enter the calculator application.
Click this icon to enter the email application and send files. Before sending
files, you need to create an email account.
Click this icon to enter the Office viewer application. In this application, you
can view office files, including excel, word, power point, and PDF files.
Click this icon to enter the World clock application. In this application, you can
convert time and zone.
56
4.9 File Management
The product supports connection to USB flash memory. Enter the File Viewer application,
you can preview all files in the internal storage and storage devices connected via USB ports
and select, copy, paste, delete and search for files.
4.9.1 File Viewer Page
On the Home page, click File Viewer, as shown in the following figure.
4.9.2 File Preview
Enter the File Viewer application, you can click the submenu at the left side according to
requirements, preview internal storage, external storage devices connected via the USB ports,
cloud stored files, FTP uploaded files, and local network files, as shown in the following
figure.
57
4.9.3 File Filtering
You can click the menu at the left side to display files by types, for example, document,
picture, music, video, archive and downloaded. You can also click to filter files by picture,
music and video.
⚫ The system supports two view modes: list and thumbnail. You can click and
at the top right corner to switch view modes, as shown in the following figure.
⚫ Click to display files based on name, type, size, and modification time in an
increment or decrement manner.
58
4.9.4 File Search
Enter the File Viewer application, and click . In the dialog box that is displayed, enter
keywords in the search box according to requirements. The system will display a list of files
that match the keywords.
4.9.5 File Operation
Enter the File Viewer application. You can create folders according to requirements, select
files by long pressing, and set wallpaper/copy/paste/delete. For details on other operation,
click in the upper right corner for more operation.
59
4.10 End Meeting
4.10.1 Manually End Meeting
On the Home page, click . The Save meeting discussion page will be displayed. The
meeting will end and timer will stop.
File Name
The Save meeting discussion page displays pages, annotation page screenshots, and remote
control screenshots in the discussion mode in this meeting, as shown in the following figure.
Picture files are named in the following of prefix + creation file. Slide left/right using a finger
to switch pictures.
Prefix name rule: WB (discussion mode page), AN (annotation page screenshot), and SS
(remote control screenshot).
Save Meeting Data
When no external USB flash memories are connected, icons in the Save to area will be gray.
When an external USB flash memory is connected, icons in the Save to area will turn into
blue. Click the USB icon in blue. The “uc” folder will be created under the root folder, and the
selected files will be saved in it.
− Back to meeting: The meeting will be continued; files are not cleared and timer
continued.
− End meeting: The Warning dialog box will be displayed.
60
− Click Confirm. All writing pages and screenshots will be deleted, and go back to
start screen page. The current meeting will be ended and the timer will reset.
− Click Cancel. The meeting continues and the system stays on the Save meeting
discussion page.
⚫ Do not eject USB flash memory before completing the saving process.
⚫ If the USB flash memory is bigger than 16GB or the file format is not FAT32, the data will not be
saved properly.
Send E-mail
Click the button on the Save meeting discussion page, and click AquaMail to share
current meeting files by email. Before sending, confirm that an email account is successfully
set.
61
4.10.2 Automatically End Meeting
If the display is left un-operated for a specified duration, it will be locked to guarantee your
privacy. Choose Settings > Power ON/OFF Setting to set the duration. For details on the
setting method, see “Power ON/OFF Setting”.
After the display is locked, if it is operated again within 120 seconds, the display is unlocked.
Otherwise, the display enters the shut down mode and automatically deletes all meeting
content. After the display is unlocked, the countdown dialog box will not appear in current
meeting. The dialog box can be restored if you create a new meeting after current meeting is
complete.
62
5 Quick Setting Menu
Using two fingers to swipe up from the bottom of the screen, the quick setting menu will then
show up, as shown in the following figure.
Icon
Functions
Drag the slider to adjust the brightness.
Drag the slider to adjust the volume.
Click the icon to mute/unmute.
Click the icon to turn on/off the beep sound.
Click the icon to turn on/off the blue light filter.
63
Icon
Functions
Click the icon to turn on/off the Smart system Wi-Fi.
Click the icon to turn on/off the audio only function.
Click the icon to turn on/off the left toolbar.
Click the icon to turn on/off the right toolbar.
Click the icon to enter the settings page.
Click the icon to return to Home page.
64
6 Serial Port Control
Connect RS-232 port to the PC or controlling product. Enable RS-232 serial port connection
and complete the following configuration.
Port: COM1 (Set according to PC or controlling product’s port number)
Baud rate
19200
Odd/even check
None
Data bits
8
Stop bit
1
The following tables list controlling codes, querying codes and return.
Function
Controlling codes
Return codes
Power on
7F 08 99 A2 B3 C4 02 FF 01 00
CF
7F 09 99 A2 B3 C4 02 FF 01 00 01
CF
Power off
7F 08 99 A2 B3 C4 02 FF 01 01
CF
7F 09 99 A2 B3 C4 02 FF 01 01 01
CF
Mute/Unmute
7F 08 99 A2 B3 C4 02 FF 01 02
CF
7F 09 99 A2 B3 C4 02 FF 01 02 01
CF
Display status
7F 08 99 A2 B3 C4 02 FF 01 09
CF
7F 09 99 A2 B3 C4 02 FF 01 09 01
CF
HDMI front
7F 08 99 A2 B3 C4 02 FF 01 0A
CF
7F 09 99 A2 B3 C4 02 FF 01 0A 01
CF
HDMI rear 1
7F 08 99 A2 B3 C4 02 FF 01 52
CF
7F 09 99 A2 B3 C4 02 FF 01 52 01
CF
HDMI rear 2
7F 08 99 A2 B3 C4 02 FF 01 53
CF
7F 09 99 A2 B3 C4 02 FF 01 53 01
CF
HDMI rear 3
7F 08 99 A2 B3 C4 02 FF 01 54
CF
7F 09 99 A2 B3 C4 02 FF 01 54 01
CF
Internal PC
7F 08 99 A2 B3 C4 02 FF 01 38
CF
7F 09 99 A2 B3 C4 02 FF 01 38 01
CF
DP
7F 08 99 A2 B3 C4 02 FF 01 56
CF
7F 09 99 A2 B3 C4 02 FF 01 56 01
CF
Page up
7F 08 99 A2 B3 C4 02 FF 01 13
CF
7F 09 99 A2 B3 C4 02 FF 01 13 01
CF
65
Function
Controlling codes
Return codes
Page down
7F 08 99 A2 B3 C4 02 FF 01 14
CF
7F 09 99 A2 B3 C4 02 FF 01 14 01
CF
VOL -
7F 08 99 A2 B3 C4 02 FF 01 17
CF
7F 09 99 A2 B3 C4 02 FF 01 17 01
CF
VOL +
7F 08 99 A2 B3 C4 02 FF 01 18
CF
7F 09 99 A2 B3 C4 02 FF 01 18 01
CF
Menu
7F 08 99 A2 B3 C4 02 FF 01 1B
CF
7F 09 99 A2 B3 C4 02 FF 01 1B 01
CF
Home page
7F 08 99 A2 B3 C4 02 FF 01 1C
CF
7F 09 99 A2 B3 C4 02 FF 01 1C 01
CF
Return (exit)
7F 08 99 A2 B3 C4 02 FF 01 1D
CF
7F 09 99 A2 B3 C4 02 FF 01 1D 01
CF
OK
7F 08 99 A2 B3 C4 02 FF 01 2B
CF
7F 09 99 A2 B3 C4 02 FF 01 2B 01
CF
←
7F 08 99 A2 B3 C4 02 FF 01 2C
CF
7F 09 99 A2 B3 C4 02 FF 01 2C 01
CF
→
7F 08 99 A2 B3 C4 02 FF 01 2D
CF
7F 09 99 A2 B3 C4 02 FF 01 2D 01
CF
↑
7F 08 99 A2 B3 C4 02 FF 01 2E
CF
7F 09 99 A2 B3 C4 02 FF 01 2E 01
CF
↓
7F 08 99 A2 B3 C4 02 FF 01 2F
CF
7F 09 99 A2 B3 C4 02 FF 01 2F 01
CF
Query the
firmware
version
number
7F 08 99 A2 B3 C4 02 FF 01 3D
CF
7F 09 99 A2 B3 C4 02 FF 01 3D 01
CF
Enable the
comment
function
7F 08 99 A2 B3 C4 02 FF 01 40
CF
7F 09 99 A2 B3 C4 02 FF 01 40 01
CF
Set volume
7F 08 99 A2 B3 C4 02 FF 05 XX
CF
XX indicates the volume value (0 to
100), corresponding to hexadecimals
00 to 64.
7F 09 99 A2 B3 C4 02 FF 05 XX
01 CF
66
Function
Controlling codes
Return codes
Set display
mode
7F 08 99 A2 B3 C4 02 FF 06 XX
CF
⚫ XX = 00 indicates the Standard
mode.
⚫ XX = 01 indicates the EnergyStar
mode.
⚫ XX = 02 indicates the Auto mode.
7F 09 99 A2 B3 C4 02 FF 06 XX
01 CF
Increase
backlight
brightness
7F 08 99 A2 B3 C4 02 FF 01 47
CF
7F 09 99 A2 B3 C4 02 FF 01 47 01
CF
Decrease
backlight
brightness
7F 08 99 A2 B3 C4 02 FF 01 48
CF
7F 09 99 A2 B3 C4 02 FF 01 48 01
CF
Set the value
of backlight
brightness
7F 08 99 A2 B3 C4 02 FF 09 XX
CF
XX indicates the value of backlight
brightness (0 - 100), corresponding to
the hexadecimal number system (00 -
64).
7F 09 99 A2 B3 C4 02 FF 09 XX
01 CF
Switch
backlight
7F 08 99 A2 B3 C4 02 FF 01 15
CF
7F 09 99 A2 B3 C4 02 FF 01 15
XX CF
⚫ XX = 01 indicates the backlight is
on.
⚫ XX = 00 indicates the backlight is
off.
Switch to
child safety
lock
7F 08 99 A2 B3 C4 02 FF 01 57
CF
7F 09 99 A2 B3 C4 02 FF 01 57 01
CF
Screenshot
7F 08 99 A2 B3 C4 02 FF 01 1F
CF
7F 09 99 A2 B3 C4 02 FF 01 1F 01
CF
Settings
7F 08 99 A2 B3 C4 02 FF 01 20
CF
7F 09 99 A2 B3 C4 02 FF 01 20 01
CF
67
Function
Querying codes
Return codes
Power
supply
7F 08 99 A2 B3 C4 02 FF 01 37 CF
7F 09 99 A2 B3 C4 02 FF 01 37
XX CF
XX indicates the power on/off state.
⚫ XX = 01: power on state
⚫ XX = 00: power off state
Speaker
7F 08 99 A2 B3 C4 02 FF 01 82 CF
7F 08 99 A2 B3 C4 02 FF 01 82
XX CF
⚫ 01: mute
⚫ 00: non-mute
Current
signal
source
7F 08 99 A2 B3 C4 02 FF 01 50 CF
7F 09 99 A2 B3 C4 02 FF 01 50
XX CF
⚫ Smart system = 30
⚫ PC = 17
⚫ DP = 20
⚫ HDMI rear 1 = 1F
⚫ HDMI Rear 2 = 1E
⚫ HDMI Rear 3 = 18
⚫ HDMI Front = 19
Speaker
volume
7F 08 99 A2 B3 C4 02 FF 01 33 CF
7F 09 99 A2 B3 C4 02 FF 01 33
XX CF
XX indicates current volume value (XX
is a hexadecimal value, range: 00~64).
For example, XX = 20 indicates current
volume value is 32 (decimal value), XX
= 00 indicates mute state.
D.Mode
7F 08 99 A2 B3 C4 02 FF 01 35 CF
7F 09 99 A2 B3 C4 02 FF 01 35
XX CF
XX indicates the mode. 00 and 01
indicate standard and eco modes
respectively.
Backlight
brightness
7F 08 99 A2 B3 C4 02 FF 01 49 CF
7F 09 99 A2 B3 C4 02 FF 01 49
XX CF
XX indicates the value of backlight
brightness (0 - 100), corresponding to
the hexadecimal number system (00 -
64).
68
Function
Querying codes
Return codes
Backlight
status
7F 08 99 A2 B3 C4 02 FF 01 81 CF
7F 08 99 A2 B3 C4 02 FF 01 81
XX CF
⚫ XX = 00 indicates the backlight is
on.
⚫ XX = 01 indicates the backlight is
off.
Switch to
child safety
lock
7F 08 99 A2 B3 C4 02 FF 01 84 CF
7F 08 99 A2 B3 C4 02 FF 01 84
XX CF
⚫ XX = 01 indicates the child safety
lock is on.
⚫ XX = 00 indicates the child safety
lock is off.
Whiteboard
state
7F 08 99 A2 B3 C4 02 FF 01 83 CF
7F 08 99 A2 B3 C4 02 FF 01 83
XX CF
⚫ XX = 01 indicates the whiteboard
state.
⚫ XX = 00 indicates non-whiteboard
state.
Return to
system state
of the
previous 9
options
7F 08 99 A2 B3 C4 02 FF 0A 00 CF
7F 08 99 A2 B3 C4 02 FF 0A 00
AB CD EF GH IJ OP QR ST UV
CF
⚫ AB: Power supply
⚫ CD: Speaker
⚫ EF: Current signal source
⚫ GH: Speaker volume
⚫ IJ: D.Mode
⚫ OP: backlight brightness
⚫ QR: backlight state
⚫ ST: Whiteboard state
⚫ UV: Switch to child safety lock
69
7 FAQ & Troubleshooting
Symptom
Troubleshooting Methods
The display cannot be powered on
or the indicator is off.
Check whether the power supply is connected.
Check whether the power supply plug is properly
connected.
Check whether the power supply line is properly
connected.
Check whether the rocker switch is enabled.
Press the reset switch and start the system again.
The remote control is not causing
a response.
Replace the batteries.
Check whether the polarity direction of the batteries
is correct.
Use the remote control aligning with the IR receive
window. For details, see section "Remote Control".
The image is normal but there is
no sound.
Increase volume on both the display and the
Windows system.
Check whether the display and the Windows system
are muted.
If an external computer is connected, check whether
the connection cables are normal.
During the video conference, the
remote party cannot hear the
sound of the local party.
In Control Panel > Sound, set the product
parameters to the default values in the Recording tab
page.
The system is automatically
powered on/off when no operation
is performed.
Disable the automatic power-on/off function. For
details, see section "Power ON/OFF Setting".
Check whether the display entered shut down mode
due to no operation for an extended period of time.
Check whether the input power supply is stable.
The colors of images are
abnormal.
Check whether the HDMI cable is properly connected
or has any quality issue.
The touch function is abnormal or
Restart the display.
70
Symptom
Troubleshooting Methods
the positioning is inaccurate.
In the Windows system, perform positioning again.
For details, see section "Positioning".
The touch function is unavailable
when the external signal source
channel is being used.
Switch between different external signal sources.
Ensure that the USB touch cable is connected to the
proper port. For details, see section "Ports".
Remove and insert the USB touch cable again.
There is no sound when the HDMI
in channel is used.
Remove and insert the HDMI cable again.
No image is displayed when the
HDMI out channel is used.
Generally, this issue is caused by the compatibility of
the external display product. Replace the external
display product and test again.
The HDMI cable is too long or has a poor quality.
Replace the HDMI cable delivered with the product.
The touch function on the front
panel is ineffective.
Touch the button using the fingertip completely.
Check whether the finger is wet or has other liquids
on it.
Restart the display.
The USB flash drive cannot be
identified.
Check whether the USB flash drive is inserted into
the correct USB port. For details, see section "Ports".
The conference records cannot be
saved on the USB flash drive, and
the system prompts "The target
storage product has no write
permissions."
Format the USB flash drive to the FAT32 format.
The internal PC has no signal.
Check whether the internal PC is properly inserted in
the slot.
Check whether the internal PC enters the shut down
state.
Press the power button on the internal PC (for details,
see the instructions of the internal PC), and manually
start up the internal PC.
In the Smart system or Windows
system, no wireless network can
be found or the wireless network
signal is weak.
Check whether the Wi-Fi antenna is properly installed
on the Smart system. For details, see section "Ports".
Check whether the Wi-Fi antenna is properly installed
for the internal PC.
The keyboard is not correctly
displayed.
Confirm that the hardware keyboard is enabled.
71
8 Specifications
Model
TT-6518VN
TT-7518VN
TT-8618VN
Display
Backlight
LED
Display Area
1431.50 mm x 806.50
mm
1653.24 mm x 931.26
mm
1895.04 mm x 1065.96
mm
Active Screen Size
65 inch
75 inch
85.60 inch
Display Ratio
16:9
Resolution
3840 horiz. by 2160 vert. Pixels, RGB stripe arrangement
Display Colors
10 bit, 1.07 billion colors
Brightness
350nit
Contrast
1300:1
Response Time
8 ms
Life Time
50000 h (Min.)
Speaker
Speaker Position
Forward
Max. Power
Output
2 x 15 W
Electrical
Power
Consumption
Maximum ≤ 220 W
Standby Mode ≤ 0.5 W
Maximum ≤ 300 W
Standby Mode ≤ 0.5 W
Maximum ≤ 450 W
Standby Mode ≤ 0.5 W
Working Voltage
AC 100 V – 240 V, 50 Hz/60 Hz
Touch
Touch Surface
Anti-glare tempered glass
Transparency
88%
Surface Hardness
7H
72
Model
TT-6518VN
TT-7518VN
TT-8618VN
HID support
HID
Touch Points
10 Points
Writing Tools
Eraser, Stylus or Finger
Scan Speed
250 Hz
Positioning
Accuracy
Center area 1.0 – 1.5 mm/Edge area 1.2 – 2.0 mm
Communication
Interface
USB-A
Transportation/Storage
Storage
Temperature/Humi
dity
-20℃ – 60℃/20％RH – 80％RH (Non coagulation)
Working
Temperature/Humi
dity
0℃– 40℃/20％RH– 80％RH (Non coagulation)
Mounting
(optional)
Wall-mounted/Floor Stand
Outline Dimension
1546 mm x 944 mm x 89
mm
1771 mm x 1071 mm x
104 mm
2018 mm x 1211 mm x
104 mm
Packing
Dimension
1720 mm x 1085 mm x
275mm
1918 mm x 1190 mm x
275mm
2155 mm x 1320 mm x
310mm
Net Weight
39.5 kg
50.5 kg
65.0 kg
Gross Weight
55 kg
68 kg
87 kg
Ports
Front Interface
Inputs
HDMI In x 1, USB (Touch) x 1, USB (Public) x 2
Rear Interface
Inputs
HDMI In x 3, DP x 1, USB (Touch) x 4, HDMI Out x 1, DC Out (5V, 2A),
SPDIF out x 1, Earphone out x 1, USB 2.0 (Public) x 1, USB 2.0 (Embedded) x
1, RS-232 x 1, RJ45 x 2, USB 3.0 (Public) x 1, OPS Slots (4K@60Hz), Line
Out x 1
Other functions
Intelligent thermos
protector
Yes
Build-in WIFI
2.4G/5G (Optional)
73
Model
TT-6518VN
TT-7518VN
TT-8618VN
Smart System
Chips
ARM A53 x 4 1.4 GHz
RAM
2 GB
Flash
8 GB
Multimedia File
Formats
Supports all major types of multi-media files
Android Software
On Screen
Annotation
Yes
Discussion Board
Yes
74
9 More Information
For More Information
Please visit our website (www.newline-interactive.com) for detailed instruction manual.
Contact Us for Support
Please email us at support@newline-interactive.com.
Our company is devoted to product innovation and technology enhancement. Therefore, we may change product specs and information without notice,
Product pictures in the manual are for reference only, please refer to actual products.