Peerless FLAT PANEL FLOOR CART User Manual
Displayed below is the user manual for FLAT PANEL FLOOR CART by Peerless which is a product in the Multimedia Carts & Stands category. This manual has pages.
Related Manuals
12015-06-30 #:126-9068-1
ENG
PANA-C84103
500 lb
(227 kg)
MAX
22015-06-30 #:126-9068-1
Heavy
(13mm)
Do not begin to install product until you have read and understood the instructions and warnings contained in
this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
This product must be installed onto fl at, hard, level surface to prevent tipping. The cart or stand is not affi xed or
secured to the fl oor, and may therefore tip over and/or fall if screen and/or stand is shaken or hit. Displays must
be removed before moving cart. Not recommended for use in areas with heavy traffi c. This product is intended
for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Screws must
be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the
Maximum Load Capacity. Be careful not to pinch fi ngers when operating the mount. For support please call
customer care at 1-800-865-2112.
WARNING
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
Symbols
ENG
WARNING
ENG
Display center.
ENG
x3
Screws must get at
least three full turns
and fi t snug.
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
32015-06-30 #:126-9068-1
This page was intentionally left blank
ENG
42015-06-30 #:126-9068-1
Parts List
Part #Description Qty
Acaster, 5" swivel 4 600-0026
Bcaster support 4 145-T1799
Ccover 6 145-T1809
Dbase leg 2 145-T1767
Ehorizontal leg support 2 145-T1785
Fbase support tube 2 145-T1812
Gbase support 10 560-T1261
Hvertical leg support 2 145-T1777
Iadaptor bracket left 1 146-T1298
Jadaptor bracket right 1 146-T1299
Kcomputer cover 1 145-T1930
Lcomputer shelf 1 145-T1931
Mrail weldment 1 146-T1295
Ncord bracket 4 146-T1321
Olocking tab 4 145-TI936
PM8 x 16mm socket button screw 84 520-9527
QM8 square nut 64 530-1066
Rcover clip 24 590-0317
SM5 x 10mm type-f, socket pin screw 6 520-1164
TM5 x 12mm socket pin screw 4 520-1064
U1/4" power bit 1 560-0263
V5mm allen wrench 1 560-9640
Wlock tab 2 201-T1204
Xvertical support bracket 2 146-T1296
Y4mm allen wrench 1 560-9646
Zclip hook bracket 2 146-T1320
AA M5 x 30mm socket pin screw 2 520-1112
BB cable tie 8 560-9711
Parts (Before beginning, make sure you have all parts shown below).
D (2)
base leg
A (4)
caster B (4)
caster support C (6)
cover
E (2)
horizontal leg
support
F (2)
base support
tube
G (10)
base support
H (2)
vertical leg
support
J (1)
adaptor
bracket right
I (1)
adaptor
bracket left
52015-06-30 #:126-9068-1
K (1)
computer cover
P (84)
M8 x 16mm Q (64)
M8 square nut
R (24)
cover clip S (6)
M5 x 10mm
U (1)
1/4" power
bit V (1)
5mm allen
wrench
4mm allen
wrench
Y (1)
L (1)
computer shelf
W (2)
Z (2)
BB (8)
AA (2)
lock tab
clip hook
bracket
cable tie
M5 x 30mm
M (1)
rail
weldment
O (4)
locking tab
N (4)
cord
bracket
X (2)
vertical support
bracket
M5 x 12mm
T (4)
62015-06-30 #:126-9068-1
1
P (4)
A
B
P (2)
Q (2)
Repeat for each caster assembly.
Do not fully tighten hardware
SIDE VIEW
(5mm)
V
72015-06-30 #:126-9068-1
2
P (4)
P (4)
F
F
Q (2)
Q (2)
D
Q (2)
Q (2)
Repeat for each base leg assembly.
(5mm)
V
82015-06-30 #:126-9068-1
3
4
Repeat for each base leg assembly.
Repeat for each base support (x10).
Q(4)
G
P(4)
SIDE VIEW
TIGHTEN
CONNECTING
HARDWARE
FLUSH
EDGES
ENG
Do not fully tighten hardware
Casters must be fl ush to end of horizontal leg support.
ENG
92015-06-30 #:126-9068-1
5
Repeat for each side (x2).
H
6
TIGHTEN
CONNECTING
HARDWARE
LOCK WHEELS
TIGHTEN
CONNECTING
HARDWARE
E
G(4)
10 2015-06-30 #:126-9068-1
E
E
7
8
TIGHTEN
CONNECTING
HARDWARE
TIGHTEN
CONNECTING
HARDWARE
G(2)
38.0"
96.5cm
11 2015-06-30 #:126-9068-1
9
10
Repeat for each vertical
support bracket (x4).
P (4)
P (2)
X (2)
Q (4)
X
1/8"
(3mm) 1/8"
(3mm)
12 2015-06-30 #:126-9068-1
M
11
TIGHTEN
HARDWARE
(X2)
TIGHTEN
HARDWARE
(X2)
Cross support must center on vertical leg supports.
13 2015-06-30 #:126-9068-1
12
N
O
T
TIGHTEN
CONNECTING
HARDWARE
TOP VIEW
OPTIONAL: Unlock wheels to move cart to
desired location; Lock wheels before hanging
screens.
LOCK WHEELS
N
T
O
14 2015-06-30 #:126-9068-1
13
J
I
15 2015-06-30 #:126-9068-1
14
14
S (2)
W (2)
AA (2)
Z (2)
16 2015-06-30 #:126-9068-1
Z (2)
15-1
Secure screw in "locked" position.
Unlocked Locked
15-2
17 2015-06-30 #:126-9068-1
16
L
S (2)
L
K
1/8"
(3mm)
TIGHTEN
CONNECTING
HARDWARE
17
L
18 2015-06-30 #:126-9068-1
Repeat for each cover.
18
R (4)
C
19 2015-06-30 #:126-9068-1
19
Route cables through cord brackets.
N
Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and
workmanship, under normal use, for a period of fi ve years from the date of purchase by the original end-user (but in no case longer than
six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any
product which fails to conform with this warranty.
In no event shall the duration of any implied warranty of merchantability or fi tness for a particular purpose be longer than the
period of the applicable express warranty set forth above. Some states do not allow limitations on how long a implied warranty lasts,
so the above limitation may not apply to you.
This warranty does not cover damage caused by (a) service or repairs by the customer or a person who is not authorized for such service
or repairs by Peerless, (b) the failure to utilize proper packing when returning the product, (c) incorrect installation or the failure to follow
Peerless' instructions or warnings when installing, using or storing the product, or (d) misuse or accident, in transit or otherwise, including
in cases of third party actions and force majeure.
In no event shall Peerless be liable for incidental or consequential damages or damages arising from the theft of any product,
whether or not secured by a security device which may be included with the Peerless® product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is in lieu of all other warranties, expressed or implied, and is the sole remedy with respect to product defects. No dealer,
distributor, installer or other person is authorized to modify or extend this Limited Warranty or impose any obligation on Peerless in
connection with the sale of any Peerless® product.
This warranty gives specifi c legal rights, and you may also have other rights which vary from state to state.
LIMITED FIVE-YEAR WARRANTY
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2015, Peerless Industries,Inc.
Peerless-AV de Mexico
Ave de las Industrias 413
Parque Industrial Escobedo
Escobedo N.L Mexico 66050
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2015, Peerless Industries, Inc.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: (800) 865-2112
Fax: (800) 359-6500
www.peerless-av.com
© 2015, Peerless Industries, Inc.