Table of Contents
- Contents
- 1 - Setting up
- 2 - Connections
- 3 - Remote control
- 4 - Switch on
- 5 - Professional mode
- 6 - TV channels
- 7 - Home menu
- 8 - Settings
- 9 - TV guide
- 10 - Sources
- 11 - Timers and clock
- 12 - Network
- 13 - Your photos, videos and music
- 14 - Skype
- 15 - Smart TV
- 16 - Specifications
- 17 - Software
- 18 - Troubleshooting and support
- 19 - Safety and care
- 20 - Terms of use, copyrights and licenses
- Index
Philips 28HFL5010T/12 User Manual
Displayed below is the user manual for 28HFL5010T/12 by Philips which is a product in the Hospitality TVs category. This manual has pages.
Related Manuals
series
User Manual
28HFL5010T
32HFL5010T
40HFL5010T
48HFL5010T
55HFL5010T
Contents
1 Setting up 3
1.1 Read safety 3
1.2 TV stand and wall mounting 3
1.3 Tips on placement 3
1.4 Power cable 3
1.5 Antenna cable 4
2 Connections 5
2.1 Tips on connections 5
2.2 EasyLink HDMI CEC 6
2.3 Common interface - CAM 7
2.4 Set-top box - STB 8
2.5 Home Theatre System - HTS 8
2.6 Blu-ray Disc player 10
2.7 DVD player 10
2.8 Game console 10
2.9 USB flash drive 11
2.10 Photo camera 11
2.11 Camcorder 11
2.12 Computer 12
2.13 Headphones 12
3 Remote control 14
3.1 Key overview 14
3.2 IR sensor 15
3.3 Batteries 15
3.4 Cleaning 15
4 Switch on 16
4.1 On or Standby 16
4.2 Keys on TV* 16
4.3 Word mark brightness* 16
5 Professional mode 17
5.1 What you can do 17
5.2 Enter Professional Home Menu 17
5.3 Enable Professional Home Menu 17
5.4 Professional settings menu 17
5.5 MyChoice setup 20
5.6 Combine channel list 21
5.7 Smart TV Settings 21
6 TV channels 22
6.1 Watching TV channels 22
6.2 Channel installation 27
7 Home menu 32
8 Settings 33
8.1 Setup menu 33
8.2 Picture 33
8.3 Sound 37
8.4 Universal access 39
9 TV guide 41
9.1 What you need 41
9.2 Using the TV guide 41
10 Sources 42
10.1 Sources list 42
10.2 From standby 42
10.3 EasyLink 42
11 Timers and clock 43
11.1 Sleeptimer 43
11.2 Clock 43
11.3 Switch off timer 43
11.4 Alarm 43
12 Network 44
12.1 Network 44
12.2 Wireless network 44
12.3 Wired network 45
12.4 Network settings 45
13 Your photos, videos and music 47
13.1 From a USB connection or computer 47
13.2 Wi-Fi Miracast 48
14 Skype 50
14.1 About Skype 50
14.2 What you need 50
14.3 Start with Skype 50
14.4 Skype menu 51
14.5 My profile 51
14.6 People 52
14.7 Calling on Skype 53
14.8 Skype credit 54
14.9 Skype settings 55
14.10 Sign out 56
14.11 Quit Skype 56
14.12 Terms of use & Privacy Policy 56
15 Smart TV 57
15.1 About Smart TV 57
15.2 What you need 57
15.3 Smart TV Apps 57
15.4 Reset Smart TV 58
16 Specifications 59
16.1 Environmental 59
16.2 Reception 59
16.3 Display 60
16.4 Power 60
16.5 Dimensions and weights 60
16.6 Wall mounting 61
16.7 Connectivity 61
16.8 Multimedia 61
17 Software 62
17.1 Software update 62
17.2 Software version 62
17.3 Open source software 62
17.4 Open source license 63
18 Troubleshooting and support 69
18.1 Troubleshooting 69
18.2 Register 70
18.3 Online help 70
18.4 Consumer Care / Repair 70
19 Safety and care 72
19.1 Safety 72
19.2 Screen care 73
20 Terms of use, copyrights and licenses
74
20.1 Terms of use 74
20.2 Copyrights and licenses 74
Index 77
2
1
Setting up
1.1
Read safety
Read the safety instructions that are supplied with the
TV first before you use the TV.
1.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
In case you lost this guide, you can download it from
www.philips.com.
Use the product type number of the TV to look for the
Quick Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
To fix the bracket securely, use screws with a length
indicated in the drawing.
• 28HFL5010T - VESA MIS-F 100x100, M4 (Minimum
7.5 mm, Maximum 8.5 mm)
• 32HFL5010T- VESA MIS-F 100x100, M4 (Minimum
8 mm, Maximum 14 mm)
• 40HFL5010T - VESA MIS-F 200x200, M4 (Minimum
12 mm, Maximum 16 mm)
• 48HFL5010T - VESA MIS-F 200x200, M6
(Minimum 12 mm, Maximum 16 mm)
• 55HFL5010T - VESA MIS-F 400x200, M6
(Minimum 12 mm, Maximum 16 mm)
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TV's weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
Note
Before mounting the TV on the wall, remove the
existing VESA screws on the back panel.
Warning
Follow all instructions provided with the TV mount. TP
Vision Europe B.V. bears no responsibility for
improper TV mounting that results in accident, injury
or damage.
To prevent damage to cables and connectors, leave a
gap of at least 5.5 cm / 2.2 inches from the back of
the TV.
Before you mount the TV on the wall, find the correct
length of the screw. To find the length of the screw,
add the thickness of your wall mount to the screw
length.
1.3
Tips on placement
• Position the TV where light does not shine directly
on the screen.
• Dim lighting conditions in the room for best
Ambilight effect.*
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal
screen size. When seated, your eyes should be level
with the centre of the screen.
* Ambilight function is only for TVs with Ambilight.
1.4
Power cable
• Insert the power cable into the POWER connector
on the back of the TV.
• Make sure the power cable is securely inserted in
the connector.
• Make sure that the power plug, in the wall socket, is
accessible at all times.
• When you unplug the power cable, always pull the
plug, never pull the cable.
3
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
1.5
Antenna cable
Insert the antenna plug firmly into the ANTENNA
socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
4
2
Connections
2.1
Tips on connections
Antenna
If you have a Set-top box (a digital receiver) or
Recorder, connect the antenna cables to run the
antenna signal through the Set-top box and/or
Recorder first before it enters the TV. In this way, the
antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI
HDMI CEC
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for High Definition (HD) or
Ultra HD (UHD) TV signals. For best signal quality
transfer, use a High speed HDMI cable and do not use
an HDMI cable longer than 5 m.
EasyLink HDMI CEC
If your devices are connected with HDMI and have
EasyLink, you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched On on
the TV and the connected device.
DVI to HDMI
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use one of the HDMI connections
and add an Audio L/R cable (mini-jack 3.5mm) to
AUDIO IN for sound, on the back of the TV.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
HDMI ARC
All of the HDMI connections on the TV have HDMI
ARC (Audio Return Channel).
If the device, typically a Home Theatre System (HTS),
also has the HDMI ARC connection, connect it to any
of the HDMI connections on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
You can use any HDMI connection on this TV to
connect the HTS but ARC is only available for 1
device/connection at a time.
In case you prefer to switch off ARC on the HDMI
connections, enter the Professional Home Menu.
Select TV settings > Sound > Advanced > HDMI ARC.
Y Pb Pr - Audio L R
Y Pb Pr - Component Video is a high quality
connection. The YPbPr connection can be used for
High Definition (HD) TV signals. Next to the Y, Pb and
Pr signals add the Audio Left and Right signals for
sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
• Only for TVs with component connectors.
5
CVBS - Audio L R
CVBS - Composite Video is a high quality
connection. The CVBS connection can be used for
High Definition (HD) TV signals. Next to the CVBS
signal adds the Audio Left and Right signals for
sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
• Only for TVs with component/composite
connectors.
Scart
SCART is a good quality connection. The SCART
connection can be used for CVBS and RGB video
signals but cannot be used for High Definition (HD) TV
signals. The SCART connection combines video and
audio signals.
Use the SCART adapter cable to connect your device.
Audio Out - Optical
Audio Out - Optical is a high quality sound
connection. This optical connection can carry 5.1
audio channels. If your device, typically a Home
Theatre System (HTS), has no HDMI ARC connection,
you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out -
Optical connection sends the sound from the TV to
the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theatre System.
If the sound does not match the video on screen, you
can adjust the audio to video synchronisation.
2.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.
Example HDMI CEC branding names are property of
their respective owners.
6
Operate devices
To operate a device connected to HDMI and set up
with EasyLink, select the device - or its activity - in
the list of TV connections. Press SOURCE, select a
device connected to an HDMI connection and press
OK.
Once the device is selected, the TV remote control
can control the device. However and OPTIONS
keys and some other TV keys are not forwarded to
the device.
If the key you need is not on the TV remote control,
you can select the key in the Options menu.
Press OPTIONS and select Controls in the menu bar.
On the screen, select the device key you need and
press OK.
Some very specific device keys might not be available
in the Controls menu.
Note: Only devices that support EasyLink remote
control function will respond to the TV remote
control.
EasyLink settings
The TV comes with all EasyLink settings switched on.
You can switch off any EasyLink setting
independently.
EasyLink
To switch off EasyLink completely . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > EasyLink,
and press OK.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
EasyLink Remote Control
If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can switch off EasyLink remote control separately.
In the EasyLink settings menu, select EasyLink
remote control and select Off.
Pixel Plus Link
Some devices, a DVD or Blu-ray Disc player, might
have their own picture quality processing. To avoid
bad picture quality caused by interference with the
TV processing, the picture processing of these devices
should be disabled. The TV comes with Pixel Plus Link
switched on and disables the picture quality
processing of recent Philips devices connected to the
TV.
To switch off Pixel Plus Link, in the EasyLink settings
menu, select Pixel Plus Link and select Off.
Auto subtitle shift
If you play a DVD or Blu-ray Disc on a Philips disc
player that supports subtitles, the TV can move the
subtitles upwards. Subtitles will be visible whatever
Picture format you select. The TV comes with Auto
subtitle shift switched on.
To switch off Auto subtitle shift, in the EasyLink
settings menu, select Auto subtitle shift and select
Off.
Auto switch off devices
You can set the TV to switch off the connecting HDMI-
CEC compliant devices if they are not the active
source. The TV switches the connected device to
standby after 10 minutes of inactivity.
2.3
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV
broadcasters in your region. These programmes are
scrambled by the TV broadcaster and descrambled
with a prepaid CI+ module.
Digital TV broadcasters provide this CI+ module
(Conditional Access Module - CAM) when you
subscribe to their premium programmes. These
programmes have a high level of copy protection.
Contact a digital TV broadcaster for more information
on terms & conditions.
CAM
Insert a CAM module
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion.
Incorrect insertion can damage the CAM and TV.
7
Use the Common Interface slot on the TV to insert the
CAM card.
With the front of the card facing towards you, gently
insert the CAM as far as it will go.
Leave the card in the slot permanently.
It may take a few minutes before the CAM is
activated. Removing the CAM will deactivate the
broadcast service on TV.
If a CAM is inserted and subscription fees are paid,
(connection methods can differ), you can watch the
TV broadcast. The inserted CAM is exclusively for
your TV.
CAM settings
To set passwords or PIN codes for the CAM TV
broadcast, press and select Setup and press OK.
Select Channel settings > Common Interface.
Select the CAM TV broadcaster and press OK.
2.4
Set-top box - STB
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-
top box has no HDMI connection.
Switch off timer
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Do this to prevent
the TV from switching off automatically after a 4 hour
period without a key press on the remote control of
the TV.
To switch off the Switch off timer:
Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
Select TV settings > General settings > Switch off
timer and set the slider bar to Off.
2.5
Home Theatre System - HTS
Connect HTS
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-
top box has no HDMI connection.
Switch off timer
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Do this to prevent
the TV from switching off automatically after a 4 hour
period without a key press on the remote control of
the TV.
To switch off the Switch off timer:
Professional Mode: Off Press and
select Setup and press OK.
8
Professional Mode: On Enter the Professional
Home Menu.
Select TV settings > General settings > Switch off
timer and set the slider bar to Off.
Audio Out settings
Audio Out delay
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is done automatically synchronised and
always correct.
Audio sync delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. On the HTS, increase the delay value
until there is a match between picture and sound. A
delay value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio out delay on the
TV.
To switch off the Audio Out delay . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Advanced > Audio
out delay.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Audio Out offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 5ms. Maximum setting is -60ms. The Audio
Out delay setting should be switched on.
To synchronise the sound on the TV . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV
settings > Sound > Advanced > Audio out offset.
3 - Use the slider bar to set the sound offset and
press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Audio Out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio out
format to Multichannel. With Multichannel, the TV can
send the compressed multichannel sound signal from
a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
To set the Audio out format . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV
settings > Sound > Advanced > Audio out format.
3 - Select Multichannel or Stereo.
4 - Press , repeatedly if necessary, to close the
menu.
Audio Out levelling
Use the Audio Out levelling setting to level the
volume (loudness) of the TV and the Home Theatre
System when you switch over from one to another.
Volume differences can be caused by differences in
sound processing.
To level the difference in volume . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV
settings > Sound > Advanced > Audio out
levelling.
3 - If the volume difference is large, select More. If
the volume difference is small, select Less.
4 - Press , repeatedly if necessary, to close the
menu.
Audio Out levelling affects both the Audio Out -
Optical and HDMI ARC sound signals.
9
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive
or connected computer, the sound from your Home
Theatre System might be distorted. This noise is heard
when the audio or video file has DTS sound but the
Home Theatre System has no DTS sound processing.
You can fix this by setting the Audio out format of the
TV to Stereo.
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Setup > TV
settings > Sound > Advanced > Audio out format.
No sound
If you cannot hear the sound from the TV on your
Home Theatre System, check the following . . .
• Check if you connected the HDMI cable to an HDMI
ARC connection on the Home Theatre System. All
HDMI connections on the TV are HDMI ARC
connections.
• Check if the HDMI ARC setting on the TV is switched
On.
• Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the
Professional Home Menu.
• Select Setup > TV
settings > Sound > Advanced > HDMI
ARC.
2.6
Blu-ray Disc player
Use a High speed HDMI cable to connect the Blu-ray
Disc player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC,
you can operate the player with the TV remote
control.
2.7
DVD player
Use an HDMI cable to connect the DVD player to the
TV.
Alternatively, you can use a SCART cable, if the
device has no HDMI connection.
If the DVD player is connected with HDMI and has
EasyLink CEC, you can operate the player with the TV
remote control.
2.8
Game console
HDMI
For best quality, connect the game console with an
High speed HDMI cable to the TV
Y Pb Pr - Audio L R
Connect the game console with a component video
cable (Y Pb Pr) and an audio L/R cable to the TV.
10
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
CVBS - Audio L R / Scart
Connect the game console to the TV with a
composite cable (CVBS) and an audio L/R cable to
the TV.
If your game console only has Video (CVBS) and
Audio L/R output, use a Video Audio L/R to SCART
adapter to connect to the SCART connection.
Note: the CVBS to SCART Adapter is not provided in
the TV set.
CVBS - Audio L R
Connect the game console to the TV with a
composite cable (CVBS) and an audio L/R cable to
the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
2.9
USB flash drive
You can view photos or play your music and videos
from a connected USB flash drive.
Insert a USB flash drive in one of the USB
connections on the TV while the TV is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press SOURCE, select USB and press OK.
To stop watching the USB flash drive content, press
TV or select another activity.
To disconnect the USB flash drive, you can pull out
the flash drive anytime.
2.10
Photo camera
To view photos stored on your digital photo camera,
you can connect the camera directly to the TV.
Use one of the USB connections on the TV to
connect. Switch on the camera after you made the
connection.
If the contents list does not appear automatically,
press SOURCE, select USB and press OK.
Your camera might need to be set to transfer its
content with PTP (Picture Transfer Protocol). Read
the user manual of the digital photo camera.
Ultra HD on USB
You can view photos in Ultra HD resolution from a
connected USB device or flash drive. The TV will
downscale the resolution to Ultra HD if the resolution
of the photo is higher. You cannot play a native Ultra
HD video on any of the USB connections.
11
2.11
Camcorder
HDMI
For best quality, use an HDMI cable to connect the
camcorder to the TV.
CVBS - Audio L R / Scart
You can use an HDMI, YPbPr or SCART connection to
connect your camcorder. If your camcorder only has
Video (CVBS) and Audio L/R output, use a Video
Audio L/R to SCART adapter to connect to the SCART
connection.
Note: the CVBS to Scart Adaptor is not provided in
the TV set.
CVBS - Audio L R
Use a Video Audio L/R cable to connect the
camcorder to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
2.12
Computer
Connect
You can connect your computer to the TV and use
the TV as a PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the
TV.
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to
connect the PC to HDMI and an audio L/R cable (mini-
jack 3.5mm) to AUDIO IN L/R on the back of the TV.
2.13
Headphones
You can connect a set of headphones to the
connection on the TV. The connection is a mini-jack
3.5mm. You can adjust the volume of the headphones
separately.
To adjust the volume . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Headphones
12
volume and press OK.
3 - Press (up) or (down) to adjust the
volume.
4 - Press , repeatedly if necessay, to close the
menu.
13
3
Remote control
3.1
Key overview
Top
1 - Standby / On
To switch the TV On or back to Standby.
2 - MYCHOICE
To switch on mychoice
3 - CHANNEL GRID
To open or close the channel grid.
4 - SOURCE
To open or close the Sources menu - the list of
connected
devices.
5 - CLOCK
To display the clock.
6 - SMART TV
To open the Smart TV start page.
(Only for Smart TV's)
7 - ALARM
To set the alarm.
8 - SMART INFO
To open the smart information page.
9 - FORMAT
To open or close the Picture format menu.
10 - TV
To switch back to watching TV.
Middle
1 - HOME
To open or close the home menu.
2 - GUIDE
To open or close the TV guide.
3 - ADJUST
To open the Adjust menu.
4 - BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
To go back to the previous Smart TV page.
5 - Play/Pause
• Play , to playback.
• Pause , to pause playback.
6 - INFO
To open or close programme info.
7 - OK key
To confirm a selection or setting.
8 - Arrow / navigation keys
To navigate up, down, left or right.
9 - OPTIONS
To open or close the Options menu.
Bottom
1 - Channel
To switch to the next or previous channel in the
channel list.
To open the next or previous page in Text or start the
next or previous chapter on a disc.
2 - Colour keys
Follow on screen instructions. Blue key , opens
Help.
3 - Number keys and text keypad
To select a TV channel directly or to enter text.
4 - SUBTITLE
To switch subtitles on, off or Automatic.
5 - Volume
To adjust the volume level.
6 - Mute
To mute the sound or to restore it.
14
7 - TEXT
To open or close Text / Teletext.
3.2
IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
3.3
Batteries
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2
type AAA-LR03-1.5V alkaline batteries. Make sure
the + and the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
3.4
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
15
4
Switch on
4.1
On or Standby
Make sure you plugged in the mains power on the
back of the TV before you switch on the TV.
If the red indicator light is off, press the Joystick on
the right side or on the back of the TV to put the TV in
standby - the red indicator will light up.
With the TV in standby, press on the remote
control to switch the TV on.
Switch to standby
To switch the TV to standby, press on the remote
control.
Switch Off
To switch the TV Off, press the Joystick on the right
or on the back. The red indicator light is off. The TV is
still connected to the mains power but consumes a
minimum of energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
4.2
Keys on TV*
While the on-screen display is on, press the Joystick
to display the menu.
• Use the arrow/navigation keys to navigate up, down,
left or right.
• Press the Joystick to confirm a selection or setting.
4.3
Word mark brightness*
You can switch off or adjust the word mark lighting.
To adjust or switch off…
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Word
mark brightness and press OK.
3 - Select Maximum, Medium, Minimum or select Off
to switch off the lighting of the word mark.
4 - Press , repeatedly if necessary, to close the
menu.
*Only available for certain TV models
16
5
Professional mode
5.1
What you can do
In professional mode, you can configure the TV for
hotel use. Features include:
• Changing professional setup items, such as power
and speaker settings.
• USB cloning
• Downloading software via RF, including SSB
firmware, Smart TV and hotel information.
• Change TV settings, Install channels, Change
Network settings.
5.2
Enter Professional Home
Menu
To enter the Professional Home Menu
1 - Press 3, 1, 9, 7, 5, 3 and .
The professional setup menu appears.
The Professional Home Menu has items for:
• Quick picture & sound settings and TV settings
• Search for channels and Channel settings
• Connect to network and Network settings (if
applicable)
• Update software and Software settings
• Professional settings menu
5.3
Enable Professional Home
Menu
Enable professional mode
The Professional Mode will be already set to On if it
was selected during the Virgin installation procedure.
To change the setting:
1 - In the professional mode menu,
select Professional Settings menu and press OK.
2 - Select Professional settings > Professional
mode > On, and press OK:
- On: Switch on professional mode. Hospitality
features are enabled.
- Off: Switch off professional mode. The TV operates
as a normal consumer TV.
5.4
Professional settings menu
Professional settings
Dashboard
This provides the selection of Default or Custom
dashboard (i.e. Home Menu)
Professional Settings Overview
To view the Professional settings.
Room ID
Set a room ID for the TV. Restricted to numeric
characters only, with a maximum of four characters.
Channel setup
Here you can enter the channel setup menu to
rename, reorder, mark as favourites, hide/unhide
channels
Reset Professional Settings
To reset Professional mode settings to factory default
values.
Switch on settings
Customise the way the TV behaves when it is
switched on.
Switch on channel
Switches to a predefined channel.
Switch on vol
Switches to a predefined volume.
Max volume
Limits the maximum volume of the TV.
Switch On Feature
Starts up in Smart TV orMyChoice modes.
Switch on picture format
Switches to a predefined picture format.
Power Settings
Customise the way the TV behaves when it is
switched on.
Power On
Determine whether the TV goes to standby when it is
switched on.
Low Power Standby
17
Determine whether standby mode is [Fast] (regular)
or [Green] (low energy).
Smart power
Enable or disable energy saving mode.
Wake on LAN
Switch on the TV via internet if the TV is in standby.
Welcome message
Create and display a welcome message for your
guests.
Display message
Switch the welcome message [On] or [Off].
Line 1
Enter the first line of welcome text.
Line 2
Enter the second line of welcome text.
Clear
Clear the welcome message.
Message Time-out
Set how long to display the welcome message.
Welcome logo
Display logo
Enable or disable the welcome logo that appears
when the TV starts.
USB to TV
Load the welcome message from USB to TV.
SmartInfo Settings
SmartInfo
This sets the way the SmartInfo is shown.
USB to TV
Load the information for SmartInfo from USB to TV.
Control settings
Local KB lock
Select On to lock all TV buttons except . Select [Off]
or [All] to unlock or lock all buttons respectively.
RC lock
Select On to disable all buttons on the remote
control. Note that you can still enter the professional
setup menu by pressing 3, 1, 9, 7, 5, 3, .
OSD display
Enable or disable on-screen information.
High security
Select On to restrict access to the professional setup
menu.
Auto scart
Enable or disable the auto SCART feature – this
feature allows a connected SCART device to turn the
TV on or off.
USB break-in
Enable or disable access to various USB features.
Enable USB
Enable or disable access to a connected USB storage
device.
SXP BaudRate
Select a baud rate value (38400 or 19200).
Enable teletext
Enable or disable access to Teletext.
Enable MHEG
Enable or disable access to MHEG channels.
Applicable to UK only.
Enable EPG
Enable or disable access to the Electronic Programme
Guide.
Enable subtitle
Enable or disable subtitles.
Enable subtitle
Enable or disable subtitles.
Subtitle On Startup
Enable or disable subtitles when the TV starts.
Blue mute
Turn the TV screen to blue and mute the sound if
there is no signal detected.
Enable CI slot
18
Enable or disable the CI slot.
Wi-Fi Direct Cross Connection
Enable or disable Wi-Fi Direct Cross Connection.
Wi-Fi Miracast
Enable or disable the Miracast.
DirectShare
Enable or disable the DirectShare feature.
Scrambled Program OSD
When disabled, scrambled programmes will not be
visible to guests.
Wi-Fi Lost OSD
When disabled, no message will be shown when the
WiFi connection of the TV is lost.
Joint Space
Enable or disable the Joint Space feature.
Easylink Break-in/ Easylink control
Enable or disable access to various EasyLink features.
Enable Skype
Enable or disable Skype feature.
Digit Time Out
Sets the time out for the Digit OSD.
Selectable AV
The different AV connections can be selected to show
up in the Source list.
Watch TV
To select which source to select when using the
Watch TV icon / button.
Clock setup
External Clock
Enable or disable the external clock.
Clock brightness at Dim Light
This sets the level of brightness of the LCD clock
when the environmental light conditions are dim
Clock brightness at Intense Light
This sets the level of brightness of the LCD clock
when the environmental light conditions are bright
Clock Light Sensor Sensitivity
This sets the sensitivity level of the light sensor to
sense environmental light conditions
Time Download
To select from which source the time will be retrieved.
Manual, RF channel or IP channel.
Time Setting
Manually enter the time. This is only enabled when
Time download is set to Manual.
Time Download Program
Define which channel to extract the time from. Only
visible when Time Download is set to RF.
NTP Server URL
Define which URL to extract the time from. Only
visible when Time Download is set to IP.
Country Selection
Set the country in which the TV is being installed.
Time Zone
Set the time zone in which the TV is being installed.
Daylight Saving
Enable or disable daylight saving.
Time offset
Add to or subtract from the extracted time value.
Reference Date
Define whether the date is referenced from the TV.
Reference Time
Define whether the time is referenced from the TV.
Speaker settings
Set the audio output of the TV. If independent
external speakers are attached, they will match the
audio of the TV speakers.
TV speaker enable
Enable or disable TV speakers.
Independent main speaker mute
Enable or disable external speakers.
Default main speaker volume
Define the default volume to be applied when
speakers are unmuted.
19
Installation
Blank Channel
Provides a list of the installed channels that can be
selected to blank.
Free/scrambled
Select to install only Free To Air channels or also
Scrambled channels.
Multi remote control
Pair up to four RCs to a TV. Each RC is associated with
one of four colour keys.
MyChoice
Enable or disable access to premium channels
(MyChoice).
SystemUI Settings
Source
Smart UI allows hotels to display a HTML portal when
users select Browse Portal from the Home menu.
Select Off] to disable this feature and hide Browse
Portal from the Home menu. Selecting Server links
to a URL and Local displays locally-stored HTML
pages. The HTML files and supporting content
(images, video etc.) stored in the TV should not
exceed a total of 4 MB.
Fallback
If SmartUI is on, enabling the backup automatically
launches locally-stored HTML content if the link to an
external server or URL does not work.
Icon Label
Change the label of the Browse Portal icon.
Server URL
Enter the URL to access from Browse Portal.
Web Services
TVDiscovery Service
Enable auto discovery by selecting On. Disable it by
selecting Off.
SI Service
If SI Services is enabled by selecting On, users view
the server defined in Smart TV Settings when they
select Browse Portal in the home menu. If SI Services
is disabled, the locally-stored HTML files (defined in
[Smart TV Settings) will launch when Browse
Portal is selected.
IP Upgrade Service
Enable or disable IP upgrade.
Vsecure
Vsecure prevents unauthorised viewing and copying
of video – use this setting to change modes, load and
erase keys.
Vsecure over RF enable
To enable Vsecure feature for RF channels.
Load Key to USB
To load the Vsecure key to USB flash drive.
Load Key to TV
To load the Vsecure key from USB flash drive to TV.
Vsecure Self Test
To initiate self test for Vsecure.
Erase Key Option
To select which Key to be erased.
Erase Key
To effectively erase the selected Key.
Clone/Upgrade
Easily copy TV settings to a USB storage device, then
clone the settings onto another Philips TV.
RF Clone Program Info
To set the frequency, the medium and the symbol
rate of the channel for cloning via RF.
Clone to TV
Initiate cloning from USB flash drive to the TV.
Select Clone to TV
To select which clone file on the USB to clone to the
TV.
Clone to USB
To initiate download of clone items from TV to USB
flash drive.
Upgrade Mode
This sets the firmware upgrade mode to RF or IP.
Start Upgrade
To manually trigger instant firmware upgrade.
Auto Upgrade
Enable or disable automatic firmware upgrade.
20
5.5
MyChoice setup
Ask For PIN
To request for the pin code to enable MyChoice
package.
Free Package
To select the list of channels to group in this package.
Package 1
To select the list of channels to group in this package.
Package 2
To select the list of channels to group in this package.
5.6
Combine channel list
This enables or disables a combined list of channels
and AV sources.
5.7
Smart TV Settings
Smart TV can be disabled, or set to show default
content or to show content via App Control.
App Control ID
To provide the ID number for App Control.
Profile Name
To provide the name of the profile to be used for this
TV.
Manage Profiles
This will bring you to the page for changing SmartTV
settings
21
6
TV channels
6.1
Watching TV channels
Switch channels
To watch TV channels, press TV. The TV tunes to the
TV channel you last watched.
Alternatively, press to open the Home menu and
select Watch TV and press OK.
To switch channels, press CH or CH . If you
know the channel number, type in the number with
the number keys. Press OK after you entered the
number to switch channels.
To switch back to the previously tuned channel, press
.
To switch to a channel from a channel list
While watching a TV channel, press CHANNEL
GRID to open the channel grid.
The channel grid can have several pages with
channels. To view the next or previous page,
press CH or CH .
To close the channel lists without switching channels,
press CHANNEL GRID again.
Radio channels
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
Channel list
Favourite channels
You can create a favourite channel list that only holds
the channels you want to watch. With the Favourite
channel list selected, you will only see your favourite
channels when you switch through channels.
Create your favourite channel list
1 - Professional Mode: Off While watching a TV
channel, press CHANNEL GRID to open the channel
list.
Professional Mode: On In the Professional Home
Menu , select Professional Settings menu and press
OK.
Select Professional settings > Channel setup and
press OK.
2 - Select All to view all channels.
3 - Select the channel, and press to mark as
favourite.
4 - The selected channel is marked with a .
5 - To finish, press . The channels are added to
the Favourites list.
To remove a channel from the favourites list, select
the channel with , then press again to unmark
as favourite.
Reorder
You can reorder — reposition — channels in the
Favourite channel list.
1 - In the channel list Favourites, highlight the
channel you want to reposition.
2 - Press .
3 - Select the channel to reorder and press OK.
4 - Press the Navigation buttons to move the
highlighted channel to another location and press OK.
5 - Once complete, press to exit from
the Favourite channel list.
You can highlight another channel and do the same.
Channel list views
In the channel lists, you can find all installed TV and
radio channels.
Next to the channel list All, which holds all installed
channels, you can set up a list of Favourites, view the
installed Radio stations separately or discover the
newly added channels in New.
Channel logos
In some countries, the TV can show the channel
logos. If you do not want these logos to appear, you
can switch them off.
To switch off Channel logos . . .
1 - Professional Mode: Off Press and
22
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General
settings > Channel logos and press OK.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Rename channels
You can rename channels in the channel list.
1 - Select the channel you want to rename in one of
the channel lists.
2 - Select the channel to rename.
3 - Press .
You can enter text with the remote control keyboard
or open the on-screen keyboard.
With the on-screen keyboard
• To open the on-screen keyboard, place the cursor in
the name text field and press OK.
• To delete the character in front of the cursor, press
Backspace .
• To enter a character, select the character with the
arrow keys and press OK.
• To select uppercase characters, press .
• To select numbers or special characters, press .
• When you are ready, press to close the on-
screen keyboard.
• To finish renaming, select Done and press OK.
Lock a channel
To prevent children from watching a channel or a
programme, you can lock channels or lock age rated
programmes.
Lock a channel
You can lock a channel to prevent children from
watching it. To watch a locked channel you need to
enter the Child lock code. You cannot lock
programmes from connected devices.
To lock a channel . . .
1 - Professional Mode: Off While watching a TV
channel, press CHANNEL GRID to open the
channel list.
Professional Mode: On In the Professional Home
Menu , select Professional Settings menu and press
OK.
Select Professional settings > Channel setup and
press OK.
2 - In any list, select the channel you want to lock.
3 - Press OPTIONS and select Lock channel. In a
channel list, a locked channel is marked with a lock .
To unlock a channel, select the locked channel in the
channel list. Press OPTIONS and select Unlock
channel. You will need to enter the Child lock code.
Parental rating
To prevent children from watching a programme not
suitable for their age, you can use an age rating.
Some digital broadcasters have age rated their
programmes. When the age rating of a programme is
equal to or higher than the age you have set as age
rating for your child, the programme will be locked.
To watch a locked programme you must enter the
child lock code. The parental age rating is set for all
channels.
To set an age rating . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings > Child
lock > Parental rating and press OK.
3 - Enter a 4-digit Child lock code and confirm. Now
you can set an age rating.
4 - Set the age and press OK.
5 - Press , repeatedly if necessary, to close the
menu.
To switch off the parental age rating, select None as
age setting.
The TV will ask for the code to unlock the programme.
For some broadcasters / operators, the TV only locks
programmes with a higher rating.
Set or change the lock code
To set the lock code or to change the current code . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings > Child lock > Change
code and press OK.
3 - If a code is set already, enter the current Child
lock code and then enter the new code twice.
The new code is set.
Forgotten your code?
If you have forgotten your code to unlock, call
Consumer Care in your country. Find the telephone
number on the documentation that came with the TV
or go to www.philips.com/support
23
Options for channels
While watching a channel, depending on the type of
channel (analogue or digital) you are watching or
depending on the TV settings you made, some
options are available.
Open the options menu
While watching a channel, press OPTIONS.
Universal access
With Universal access switched on, you can set some
options for hearing impaired and visually impaired
people.
Video selection
Digital TV channels can offer multi video signals (multi-
feed broadcast), different camera viewpoints or
angles of the same event or different programmes on
one TV channel. The TV shows a message if any such
TV channels are available.
Subtitles
Switch Subtitles on or Subtitles off with this options.
Select Automatic to show subtitles only when the
sound is muted with .
Subtitle language
For digital broadcast, you can select an available
subtitle language temporarily if none of your
preferred languages are available.
Audio languages
For digital broadcast, you can select an available
audio language temporarily if none of your preferred
languages are available.
Dual I-II
If an audio signal contains two audio languages but
one language — or both — has no language
indication, this option is available.
Common interface
If prepaid premium content is available from a CAM,
you can set the provider settings with this option.
HbbTV on this channel
You can block the HbbTV pages from a channel that
offers HbbTV.
MHP applications
Enable or disable the MHP applications.
Status
Select Status to view technical information on the
channel (if it is analogue or digital) or a connected
device you are watching.
Share
Enables the user to communicate his activity with his
social networks (such as Twitter or email).
*For Smart TVs only.
Picture format
If black bars appear on top and bottom or on both
sides of the picture, you can adjust the picture format
to a format that fills the screen.
To change the picture format . . .
1 - While watching a TV channel, press FORMAT to
open the Picture format menu.
2 - Select a format from the list and press OK.
The following format can be available according the
picture on screen . . .
• Auto fill
• Auto zoom
• Super zoom
• Movie expand 16:9
• Wide screen
• Unscaled
• 4:3
Text / Teletext
Text pages
To open Text (Teletext) while you are watching TV
channels, press TEXT.
To close Text, press TEXT again.
Select a Text page
To select a page . . .
1 - Enter the page number with the number keys.
2 - Use the arrow keys to navigate.
3 - Press a colour key to select a colour-coded
subject at the bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The
24
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press OPTIONS and select T.O.P. overview.
Text options
In Text, press OPTIONS to select the following . . .
• Freeze page
To stop the automatic rotation of subpages.
• Dual screen / Full screen
To show the TV channel and Text alongside each
other.
• T.O.P. overview
To open T.O.P. Text.
• Enlarge
To enlarge the Text page for comfortable reading.
• Reveal
To unhide hidden information on a page.
• Cycle subpages
To cycle subpages when these are available.
• Language
To switch the group of characters that Text uses to
display correctly.
• Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text setup
Text language
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings > Language.
3 - Select Primary Teletext or Secondary Teletext.
4 - Select your preferred Text languages.
5 - Press , repeatedly if necessary, to close the
menu.
Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5 . . .
1 - Press TEXT.
2 - While watching the teletext, press OPTIONS.
3 - Select Text 2.5 > Off.
4 - Press , repeatedly if necessary, to close the
menu.
Menu language
To change the language or the TV menus and
messages . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Menu
language and press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Audio languages
If the TV channel broadcasts multiple or dual audio
languages, you can select your preferred audio
language.
1 - While you watch TV, press OPTIONS.
2 - For digital channels, select Audio language. For
analogue channels, select Alternate audio.
Press OK to confirm your selection.
3 - Select from the available languages, then
press OK.
Note:
If you have selected Alternate audio for analogue
channels, select between:
• Main: Primary audio language or
• SAP: Secondary audio language
Subtitles and languages
Subtitles
Switch subtitles on
To open the Subtitle menu, press SUBTITLE.
You can set subtitles to On, Off or Automatic.
To show subtitles when the broadcasted programme
is not in your language — the language you set for the
TV, select Automatic. Also, this setting will show
subtitles when you mute the sound with .
For analogue channels, subtitles must be made
available in Text.
25
Subtitles for digital channels
There is no need to set subtitles in Text for digital
channels.
Digital channels can offer several subtitle languages
for a programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of
these languages are available, the TV will show them.
If none of the preferred subtitle languages are
available, you can select another subtitle language
which is available.
To set the primary and secondary subtitle language . .
.
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings and select Languages >
Primary subtitles language or Secondary
subtitles language and press OK.
3 - Select a language and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
To select a subtitle language when none of your
preferred languages are available . . .
1 - Press OPTIONS.
2 - Select Subtitle language and select a language
you want temporarily and press OK.
Subtitles for analogue channels
For analogue channels, you need to make the
subtitles available for each channel manually.
1 - Switch to a channel and press TEXT to open Text.
2 - Enter the page number for subtitles, usually 888.
3 - Press TEXT again, to close Text.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open Status in the Options menu.
Audio languages
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to this audio.
If none of the preferred audio languages is available,
you can select another audio language which is
available.
To set the primary and secondary audio language . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings and select Languages >
Primary audio language or Secondary
audio language and press OK.
3 - Select a language and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
To select an audio language when none of your
preferred audio language is available . . .
1 - Press OPTIONS.
2 - Select Audio language and select an audio
language you want temporarily and press OK.
Audio languages for the hearing and visually
impaired
Some digital TV channels broadcast special audio and
subtitles adapted for people who are hearing or
visually impaired.
Menu language
To change the language or the TV menus and
messages . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Menu
language and press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Interactive TV
About iTV
With interactive TV, some digital broadcasters
combine their normal TV programme with information
or entertainment pages. On some pages, you can
respond to a programme or vote, do online shopping
or pay for a video-on-demand programme.
HbbTV, MHEG, . . .
Broadcasters use various interactive TV systems :
HbbTV (Hybrid Broadcast Broadband TV) or iTV
(Interactive TV - MHEG). Interactive TV is sometimes
referred to as Digital Text or Red button. But each
system is distinct.
Visit the broadcaster's Internet website for more
26
information.
What you need
Interactive TV is only available on digital TV channels.
To enjoy the full benefits of Interactive TV, you need
a high-speed (broadband) Internet connection to the
TV.
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings and select General settings >
HbbTV and press OK.
3 - Select On and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press OPTIONS and select HBB TV on this
channel and press OK.
3 - Select Off and press OK.
Use iTV
Open iTV pages
Most channels that offer HbbTV or iTV invite you to
press the key or OK key to open their interactive
programme.
Navigate iTV pages
You can use the arrow and colour keys, the number
keys and the key to navigate the iTV pages.
You can use the (Play) and (Pause) keys to
watch videos within iTV pages.
Digital Text (UK only)
To open Digital Text, press TEXT. To close, press .
Close iTV pages
Most iTV pages inform you which key to use to close.
To force an iTV page to close, switch to the next TV
channel and switch back.
About interactive TV
With interactive TV, some digital broadcasters
combine their normal TV programme with information
or entertainment pages.
Note:
• You cannot download files to your TV with this
feature.
• Not all TV programmes, commercials and features
include closed captioning information.
• You cannot respond to the digital content.
Visit the broadcaster's Internet website for more
information.
6.2
Channel installation
Update channels
Automatic update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
To switch off the message at start up . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Channel update
message > Off.
To switch off the Automatic channel update . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Automatic channel
update > Off and press OK.
Start an update
27
To start an update yourself . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Search for channels and press OK.
3 - Select Update channels and follow the
instructions on screen. The update may take a few
minutes.
In certain countries, the Automatic channel update is
done while watching TV or any moment when the TV
is in standby.
New channels
New channels added with the automatic channel
update are easy to find in the channel list New. The
same new channels are also stored in the All or
Radio channel list.
New channels are kept in the channel list New as
long as you don't mark them as a favourite or tune to
them.
Reinstall channels
You can search for and reinstall channels and leave
all other TV settings untouched. Alternatively, you can
do a full new TV installation.
If a child lock code is set, you will need to enter this
code before you can reinstall channels.
Reinstall channels
To reinstall the channels only . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Search for channels > Re-install
channels and press OK.
3 - Select the country where you install the TV.
4 - Select Antenna (DVB-T) or Cable (DVB-C) . The
channel search may take a few minutes. Follow the
instructions on screen.
Full installation
To redo a full TV installation . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Reinstall
TV and press OK. The installation may take a few
minutes. Follow the instructions on screen.
Factory settings
Factory settings sets the TV back to the original TV
settings for picture and sound. To switch back to the
original Factory settings . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Factory
settings and press OK.
3 - Press OK to confirm.
4 - Press , repeatedly if necessary, to close the
menu.
Channel list copy
Introduction
Channel list copy is intended for dealers and expert
users. In some countries, Channel list copy is only
available for copying satellite channels.
With Channel list copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel list copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA
• Both TVs have compatible software versions.
Current version
You can check the current version of the TV software
with Current software
info in > Setup > Software settings.
Copy channel list
To copy a channel list . . .
1 - Switch on the TV which has its channels installed.
Plug in a USB memory device.
2 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
3 - Select TV settings > General settings > Channel
list copy > Copy to USB and press OK. To copy the
channel list from this TV, you might be asked to enter
the Child lock code you entered during the
installation.
4 - When copying is done, unplug the USB memory
device.
Now you can upload the copied channel list onto
28
another Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or
not, you must use a different way to upload a channel
list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and
select language and country. You can skip Search for
channels. Finish the installation.
2 - Plug in the USB memory device that holds the
channel list of the other TV.
3 - To start the channel list upload, press and
select Setup and press OK.
4 - Select TV settings > General settings > Channel
list copy > Copy to TV and press OK. You might be
asked to enter the Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB memory device.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, press and select Setup and press OK.
Select Search for channels > Re-install channels and
press OK. Press and later Cancel to leave the
Search for channels.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. To start the reinstallation, press and
select Setup and press OK. Select TV settings >
General settings > Reinstall TV > OK. Select the
correct country and skip the Search for channels.
Finish the installation. When done, continue with step
2.
2 - Plug in the USB memory device that holds the
channel list of the other TV.
3 - To start the channel list upload, press and
select Setup and press OK.
4 - Select TV settings > General settings > Channel
list copy > Copy to TV and press OK. You might be
asked to enter the Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB memory device.
DVB-T or DVB-C
DVB-T or DVB-C reception
If both DVB-T and DVB-C reception is available in
your country and if this TV is ready to receive DVB-T
and DVB-C for your country, you have selected one
or the other during the channel installation.
If you want to change the DVB setting to start a new
channel installation . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Antenna connection
> Antenna (DVB-T) or Cable (DVB-C) and press OK.
4 - Select the DVB setting you want.
5 - Press , repeatedly if necessary, to close the
menu.
DVB-C channel installation
For ease of use, all DVB-C settings are set to
automatic.
If your DVB-C provider gave you specific DVB-C
values, the network ID or network frequency, enter
these values when the TV asks for them during
installation.
It might be necessary to adjust the scanning (full or
quick scan) or enter a specific symbol rate in the
Settings menu while installing. To set a Symbol rate,
first set the Symbol rate to Manual.
Channel number conflicts
In some countries, different TV channels
(broadcasters) might have the same channel number.
While installing, the TV shows the list with channel
number conflicts. You need to select which TV
channel you want to install on a channel number with
multiple TV channels.
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVB-
C input, you can set up your TV for both DVB-T and
DVB-C. Install one system followed by the other with
the necessary settings.
Once each system is installed, you need to switch the
antenna input signal on the Antenna connection on
the back of the TV and set the TV in the appropriate
system to view the installed channels on TV.
To select the DVB-T or DVB-C setting, see above.
DVB settings
Access DVB settings
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Search for channels and press OK.
3 - Select Re-install Channels.
4 - Select the country where you install this TV.
5 - Select Cable (DVB-C).
6 - Select Start to search channels, or
select Settings for DVB-C settings .
7 - Press , repeatedly if necessary, to close the
menu.
29
Symbol rate mode
If your cable provider did not give you a specific
symbol rate value to install the TV channels, leave the
Symbol rate mode setting on Automatic.
If you received a specific symbol rate value, select
Manual. However, the value you received could be in
the predefined list of symbol rates already. Select
Predefined symbol rates to check if your value is
available automatically.
Predefined symbol rates
With the Symbol rate mode set to Automatic, the TV
will use 1 of the predefined symbol rates as used by
most cable providers in your country.
Symbol rate
With the Symbol rate mode set to Manual, you can
enter the symbol rate value you received from your
cable provider. To enter the value, use the number
keys.
Symbol rate 2
With the Symbol rate mode set to Manual, you can
enter a second symbol rate value you received from
your cable provider. To enter the value, use the
number keys.
Network frequency mode
If you intend to use the fast Quick scan method in
Frequency scan to search for channels, select
Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network frequency
With the Network frequency mode set to Manual, you
can enter the network frequency value received from
your cable provider here. To enter the value, use the
number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster Quick scan method and use the
predefined settings used by most cable providers in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full scan method. This method will take
more time to search for and install channels.
Frequency step size
The TV searches for channels in steps of 8MHz.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of 1MHz. Using the 1MHz steps will take more
time to search for and install channels.
Digital channels
If you know your cable provider is not offering digital
channels, you can skip searching for digital channels.
Select Off.
Analogue channels
If you know your cable provider is not offering
analogue channels, you can skip searching for
analogue channels. Select Off.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free channels
only.
Reception quality
If you receive digital channels, you can check the
quality and signal strength of a channel.
If you have your own antenna, you can reposition the
antenna to try and improve the reception.
To check the reception quality of a digital channel . . .
1 - Tune to the channel.
2 - Press and select Setup and press OK.
3 - Select Channel settings > Channel installation >
Digital : reception test and press OK.
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number with
and and change the number with and . To
30
check the frequency, select Search and press OK.
If you use DVB-C to receive channels, the
option Symbol rate mode is available. For Symbol
rate mode, select Automatic, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Channel settings > Channel installation >
Analogue : Manual installation and press OK.
• System
To set up the TV system, select System and press OK.
Select your country or the part of the world where
you are now.
• Search channel
To find a channel, select Search channel and press
OK. Select Search and press OK. You can also enter a
frequency yourself. If the reception is poor, press
Search again. If you want to store the channel, select
Done and press OK.
• Fine tune
To fine tune a channel, select Fine tune and press OK.
You can fine tune the channel with or .
If you want to store the channel found, select Done
and press OK.
• Store current channel / Store as new channel
You can store the channel on the current channel
number or as a new channel number.
Select Store current channel or Store as new channel.
You can redo these steps until you have found all
available analogue TV channels.
31
7
Home menu
From the Home menu, you can start any activity you
can do with the TV.
Open the Home menu to start watching TV or start
watching a disc on your Home Theatre System. Also
in the Home menu, you can open Smart TV to surf the
Internet, start Skype.
Open the Home menu
1 - To open the Home menu, press .
2 - Select an activity using the arrow keys and
press OK to start the activity.
3 - To close the Home menu without changing the
current activity, press .
• Guest Menu
Select Guest Menu to install channels or adjust all TV
settings.
Guest Menu Select Guest Menu to adjust TV
settings .
• TV
Select TV and press OK to watch TV channels.
• Smart TV
Select Smart TV and press OK to open the Smart
TV start page.
• Source
Select Source and select a connected device in the
list underneath the icon. Press OK to switch to the
selected device.
• TV guide
Select TV guide and press OK to open a list of the
current and scheduled TV programmes of your
channels.
• Smart Info
Select Smart Info to show information provided by
the Hotel.
• Skype
Select Skype to make video calls for free.
• MyChoice
Select MyChoice to be able to select premium
services made available through MyChoice service.
• DirectShare
Select DirectShare to view Movies, pictures or play
music from mobile device to the TV.
• Miracast
Select Miracast to mirror the content of your mobile
device display on to the TV.
32
8
Settings
8.1
Setup menu
Quick picture settings
With Quick picture settings you can set your basic
picture preferences in a few easy steps. The settings
you made are stored under the Picture style -
Personal. You can return to your picture preference if
some settings were changed. You can set a preferred
picture setting for every TV activity or connected
device individually.
To return to your preferred picture setting, while
watching a TV channel, press OPTIONS, select Picture
and sound in the menu bar, select Picture style and
select Personal.
To set a Quick picture setting . . .
1 - Press , select an activity or a connected device
(or its connection) and press OK.
2 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
3 - Select Quick picture settings and press OK. Go
through the steps and finish. The activity or
connection has your personal preferences.
TV settings
In the TV settings menu you can set all Picture
and Sound settings. The item General settings in the
menu holds a collection of settings like Menu
language, Sleep timer, Switch off timer, Universal
access and more.
Search for channels
With Search for channels, you can update your
current channel list and possible newly found
channels are added to the channel list. You can also
do a reinstallation of all channels. A channel update
or a channel reinstall may take some time.
Channel settings
In the Channel settings menu, you can set your
language preferences or switch on the Universal
access for people who are hearing and visually
impaired. You can set an age rating to prevent
children from watching a rated programme and set or
change your Child lock code. You can switch on the
Automatic channel update, do a digital reception test
or install analogue channels manually.
Languages
This bundles some language settings for digital
channels.
Universal access
Bundles settings related to Universal access.
Channel installation
This bundles some settings for automatic and manual
channel installation.
Child lock
Set a PIN code to lock or unlock channels and set an
age for watching rated programs.
Connect to network
Select to make connection to your wired or wireless
network.
Network settings
Here you can change settings related to your
Network.
Update software
This item is related to updating TV software.
Software settings
Here you can see the current software version.
8.2
Picture
33
Picture style
For easy picture adjustment, you can select a preset
setting with Picture style.
1 - While watching a TV channel, press OPTIONS to
open the Options menu.
2 - Select Picture and sound in the menu bar and
select Picture style.
3 - Select a style and press OK.
The available Picture styles are . . .
• Personal - Your preferences made in Quick picture
settings
• Vivid - Ideal for daylight viewing
• Natural - Natural picture settings
• Movie - Ideal for watching movies
• Standard - Factory standard settings
• Photo - Ideal for viewing photos
Adjust a Picture style
You can adjust a Picture style . . .
1 - Select the style and press OK.
2 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
3 - Select TV settings, navigate to the individual
setting and adjust it.
4 - Press , repeatedly if necessary, to close the
menu.
To return to the original Picture style values . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Picture style and
select the style you want to reset.
3 - Press Reset . The style is reset.
Vivid
If the Picture style is switched back to Vivid every time
you switch on the TV, the TV location is set to Shop. A
setting meant for in-store promotion.
To set the TV for Home use . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
3 - Select Home and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Picture settings
Colour
With Colour, you can adjust the colour saturation of
the picture.
To adjust the colour . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Colour.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Contrast
With Contrast, you can adjust the contrast of the
picture.
To adjust the contrast . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Contrast.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Sharpness
With Sharpness, you can adjust the level of sharpness
in fine detail of the picture.
To adjust the sharpness . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Sharpness.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Advanced picture settings
Colour settings
34
Colour enhancement
With Colour enhancement, you can enhance the
colour intensity and the details in bright colours.
To adjust the level . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced > Colour
> Colour enhancement.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Colour temperature
With Colour temperature, you can set the picture to a
preset colour temperature or select Custom to set a
temperature setting yourself with Custom colour
temperature. Colour temperature and Custom colour
temperature are settings intended for expert users.
To select a preset . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced > Colour
> Colour temperature.
3 - Press (right) and select Normal, Warm or
Cool. Select Custom if you want to set a colour
temperature yourself.
4 - Press , repeatedly if necessary, to close the
menu.
Custom colour temperature
With Custom colour temperature, you can set a
colour temperature yourself. To set a Custom colour
temperature, first select Custom in the Colour
temperature setting to make the Custom colour
temperature menu available. Custom colour
temperature is a setting intended for expert users.
To set a custom colour temperature . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced > Colour
> Custom colour temperature.
3 - Press (right).
4 - Select a setting with the arrow keys. (WP is white
point and BL is black level.)
5 - Press OK to confirm a setting. You can also select
one of the presets in this menu.
6 - Press , repeatedly if necessary, to close the
menu.
Contrast settings
Contrast modes
With Contrast modes, you can set the level at which
power consumption can be reduced by dimming the
intensity of the screen. Choose for the best power
consumption or for the picture with the best intensity.
To adjust the level . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced >
Contrast > Contrast modes.
3 - Press (right) and select Best picture, Best
power, Standard or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Dynamic contrast
With Dynamic contrast, you can set the level at
which the TV automatically enhances the details in
the dark, middle and light areas of the picture.
To adjust the level . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced >
Contrast > Dynamic contrast.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Brightness
With Brightness, you can set the level of brightness of
the picture signal. Brightness is a setting intended for
expert users. We recommend non-expert users to
adjust the brightness of the picture with the Contrast
setting.
To adjust the level . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced >
35
Contrast > Brightness.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Video contrast
With Video contrast, you can decrease the range of
the video contrast. Video contrast is the setting
intended for expert users.
To adjust the level . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced >
Contrast > Video contrast.
3 - Press (right) and adjust the value with
(up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Light sensor
The Light sensor adjusts the picture automatically to
the lighting conditions of the room. You can switch
Light sensor on or off.
To switch on or off . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced >
Contrast > Light sensor.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the
menu.
• Only for TVs with light sensor function.
Gamma
With Gamma, you can set a non-linear setting for
picture luminance and contrast. Gamma is a setting
intended for expert users.
To adjust the level . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced >
Contrast > Gamma.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Sharpness settings
Super resolution
With Super resolution, you switch on a superior
sharpness in line edges and contours.
To switch on or off . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture >
Advanced > Sharpness > Super resolution.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Noise reduction
With Noise reduction, you can filter out and reduce
the level of image noise.
To adjust the noise reduction . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced >
Sharpness > Noise reduction.
3 - Press (right) and select Maximum, Medium,
Minimum or Off.
4 - Press , repeatedly if necessary, to close the
menu.
MPEG artefact reduction
With MPEG artefact reduction, you can smoothen the
digital transitions in the picture. MPEG artefacts are
mostly visible as small blocks or jagged edges in
images.
To reduce the MPEG artefacts . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Picture > Advanced >
Sharpness > MPEG artefact reduction.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the
menu.
36
Game or computer
You can switch the TV to the ideal picture setting for
gaming or for using the TV as a computer monitor.
There is a different setting for Game or Computer. If a
device has a correct type set in the Source menu -
Game console or Computer - the TV switches
automatically to the ideal setting when you switch to
the device. If you switch the setting manually, do not
forget to switch it off when you switch to watching TV
or another connected device.
To switch the setting manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced
> Activity style.
3 - Select Game, Computer or TV. The setting TV
returns to the picture settings for watching TV.
4 - Press , repeatedly if necessary, to close the
menu.
Location
If the TV is located in a shop, you can set the TV to
display an in store promotion banner. The Picture
style is set to Vivid automatically. The automatic
Switch off timer is switched off.
To set the TV to Shop location . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Location
and press OK.
3 - Select Shop and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
8.3
Sound
Sound style
For easy sound adjustment, you can select a preset
setting with Sound style.
1 - While watching a TV channel, press OPTIONS to
open the Options menu.
2 - Select Picture and sound in the menu bar and
select Sound style.
3 - Select a Sound style and press OK.
The different Sound styles are . . .
• Personal - Your personal choices made in
Personalise picture and sound
• Original - Factory standard
• News - Ideal for speech
• Movie - Ideal for watching movies
• Game - Ideal for gaming
• Music - Ideal for listening to music
Adjust a Sound style
You can adjust a Sound style . . .
1 - Select the style and press OK.
2 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
3 - Select TV settings, navigate to the individual
setting and adjust it.
Press to close the menu to store your setting.
To return to the original Sound style values . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Sound
style and select the style you want to reset.
3 - Press Reset . The style is reset.
Sound settings
Bass
With Bass, you can adjust the level of low tones in the
sound.
To adjust the level . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Bass.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Treble.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
37
Surround mode
With Surround mode, you can set the sound effect of
the TV speakers.
To set the surround mode . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Surround mode.
3 - Press (right) and select Stereo or Incredible
surround.
4 - Press , repeatedly if necessary, to close the
menu.
Headphones volume
With Headphones volume, you can set the volume of
a connected headphones separately.
To adjust the volume . . .
1 - Press OPTIONS and select Picture and sound in
the menu bar.
2 - Press (down) and select Headphones volume
and press OK.
3 - Press (up) or (down) to adjust the volume.
4 - Press , repeatedly if necessary, to close the
menu.
Advanced sound settings
Auto volume levelling
With Auto volume leveling, you can set the TV to
automatically level out sudden volume differences.
Typically at the beginning of adverts or when you are
switching channels.
To switch on or off . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Advanced > Auto
volume leveling.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the
menu.
TV speakers
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
With TV speakers, you select where you want to hear
the TV sound and how you want to control it.
• If you select Off, you permanently switch off the TV
speakers.
• If you select On, the TV speakers are always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to
the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
• If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you
can still switch to TV speakers or device speakers in
the Picture and sound menu.
To set the TV speakers . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Advanced > TV
speakers.
3 - Press (right) and select Off, TV speakers,
EasyLink or EasyLink autostart.
4 - Press , repeatedly if necessary, to close the
menu.
To switch speakers directly . . .
1 - While watching TV, press OPTIONS and select
Picture and sound.
2 - Select Speakers and select TV or Amplifier (audio
device).
3 - Press , repeatedly if necessary, to close the
menu.
Clear sound
With Clear sound, you improve the sound for speech.
Ideal for news programmes. You can switch the
speech improvement on or off.
To switch on or off . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Advanced > Clear
sound.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the
menu.
HDMI ARC
If you do not need an Audio Return Channel (ARC) on
any of the HDMI connections, you can switch the ARC
signal off.
38
Audio Out format
With Audio Out format you can set the audio out
signal of the TV to fit the sound processing
capabilities of your Home Theatre System.
Audio Out levelling
With Audio Out leveling you can level the sound
volume of the Home Theatre System with the volume
of the TV when you switch over from one to another.
Audio Out delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the picture,
you must switch off Audio Out delay on the TV.
Audio Out offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with Audio Out
offset.
TV placement
As part of the first installation, this setting is set to
either On a TV stand or Wall mounted.If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > TV
placement and press OK.
3 - Select On a TV stand or Wall mounted and press
OK.
4 - Press , repeatedly if necessary, to close the
menu.
8.4
Universal access
Switch on
With Universal access switched on, the TV is set for
use for hearing and visually impaired people.
Switch on
If you did not switch on Universal access during the
installation, you can still switch it on in Setup.
To switch on Universal access . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Universal
access and press OK.
3 - Select On and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
With Universal access switched on in Setup, the
Universal access option is added in the Options
menu.
Hearing impaired
Switch on
Digital TV channels can broadcast special audio
commentary describing what is happening on screen.
To be able to set the visually impaired audio and
effects, you have to switch on Audio description first.
Also, before you can switch on Audio description, you
have to switch on Universal access.
Audio description
With Audio description, a narrator's commentary is
added to the normal audio.
To switch on the commentary (if available) . . .
1 - With Universal access switched on, press
OPTIONS and select the Options tab in the menu
bar.
2 - Select Audio description and press OK.
3 - Select On and press OK.
You can check if an audio commentary is available.
In the Options menu, select Audio language and look
for an audio language marked with a .
Speakers / Headphones
With Speakers / Headphones, you can select where
you want to hear the audio commentary.
On the TV speakers only, on the headphones only or
on both.
To set Speakers / Headphones . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio
description > Speakers / Headphones and press OK.
3 - Select Speakers, Headphones or Speakers +
headphones and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
39
Visually impaired
Mixed volume
You can mix the volume of the normal audio with the
audio commentary.
To mix the volume . . .
1 - Press OPTIONS and select Universal access in
the menu bar.
2 - Select Mixed volume and press OK.
3 - Use the arrows up and down to set the slider bar.
4 - Press OK to confirm.
Audio effect
Some audio commentary can hold extra audio
effects, like stereo or fading sound.
To switch on Audio effects (if available) . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio
description > Audio effects and press OK.
3 - Select On or Off and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Speech
The audio commentary can also hold subtitles for the
words which are spoken.
To switch on these subtitles (if available) . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio
description > Speech and press OK.
3 - Select Descriptive (audio) or Subtitles and press
OK.
4 - Press , repeatedly if necessary, to close the
menu.
Key beep
Key beep gives an audio feedback each time you
press a key on the remote control. The volume of the
beep is fixed.
To switch on Key beep . . .
1 - Press OPTIONS, select Universal access and press
OK.
2 - Select Key beep and select On.
If Universal access does not appear in the Options
menu, switch on Universal access in Setup.
40
9
TV guide
9.1
What you need
With the TV guide you can view a list of the current
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
guide information.
The TV can collect TV guide information for the
channels that are installed on the TV (e.g the
channels you watch with Watch TV). The TV cannot
collect the TV guide information for channels viewed
from a digital receiver.
9.2
Using the TV guide
Open the TV guide
To open the TV guide, press GUIDE.
Press GUIDE again to close.
The first time you open the TV guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV guide data is stored in the
TV.
Tune to a programme
Switch to a programme
From the TV guide, you can switch to a current
programme.
To select a programme, use the arrow keys to
highlight the programme name.
Navigate to the right to view programmes scheduled
later that day.
To switch to the programme (channel), select the
programme and press OK.
View programme details
To call up the details of the selected programme,
press INFO.
Change day
The TV guide can show scheduled programmes for
the upcoming days (maximum up to 8 days).
If the TV guide information comes from the
broadcaster, you can pres CH to view the
schedule of one of the next days. Press CH to go
back to the previous day.
Alternatively, you can press OPTIONS and
select Change day.
Select Previous day, Today or Next day and
press OK, to select the day of the schedule.
Set a reminder
You can set reminders that alert you of the start of a
programme with a message on screen.
• To set a reminder, select the programme in the
schedule and press for Set reminder. The
programme is marked with a clock.
• To cancel the reminder, press the for Clear
reminder.
• To view a list of all reminders you have set,
press OPTIONS, and select All reminders.
Search by genre
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
etc.
To search for programmes by genre,
press OPTIONS and select Search by genre.
Select a genre and press OK. A list with the found
programmes appears.
41
10
Sources
10.1
Sources list
In the list of connections - the Source menu - you can
find the devices connected to the TV. From this
Source menu, you can switch to a device.
Sources menu
To open the Sources menu, press SOURCE.
To switch to a connected device, select the device
with the arrows (left) or (right) and press OK.
For some devices (HDMI-CEC devices), you can
select an activity directly in the list underneath the
device icon.
Select the device and select an activity and press OK.
To close the Source menu without switching to a
device, press SOURCE again.
10.2
From standby
With the TV in standby, you can switch on a
connected device with your TV remote control.
Play
To switch on both disc player and TV from standby
and start playing the disc or programme immediately,
press (play) on the TV remote control.
The device should be connected with an HDMI cable
and both TV and device must have HDMI CEC
switched on.
Home Theatre System
You can switch on your Home Theatre System to
listen to an audio disc or a radio channel and leave
the TV in standby.
To only switch on the HTS, with the TV in standby,
press SOURCE on the TV remote control.
10.3
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
to communicate with the connected devices. Devices
must support HDMI CEC and must be connected with
an HDMI connection.
42
11
Timers and clock
11.1
Sleeptimer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1 - Press and select Setup* and press OK.
*Professional Mode : Off Setup
*Professional Mode: On Guest Menu
2 - Select TV settings* > General settings* > Sleep
timer.
*Professional Mode : Off TV settings > General
settings
*Professional Mode: On Select Sleep timer.
With the slider bar you can set the time to up to 240
minutes in increments of 30 minutes. If set to Off, the
sleep timer is switched off. You can always switch off
your TV earlier or reset the time during the
countdown.
3 - Press , repeatedly if necessary, to close the
menu.
11.2
Clock
To know what time it is, press CLOCK on the remote
control.
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
To correct the TV clock . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Clock
> Auto clock mode, a nd select Country dependent.
3 - Select Daylight saving and select the appropriate
setting.
4 - Press , repeatedly if necessary, to close the
menu.
To set the TV clock manually . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Clock
> Auto clock mode, a nd select Manual.
3 - Select Day and Time to adjust.
4 - Press , repeatedly if necessary, to close the
menu.
11.3
Switch off timer
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no input signal
nor remote control commands for 10 minutes, the TV
switches off automatically to save energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, you should deactivate
the automatic switch off.
To deactivate the Switch off timer . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Switch off
timer and set the slider bar to Off.
3 - Press , repeatedly if necessary, to close the
menu.
11.4
Alarm
Only available if Professional Mode: On.
An alarm can be set on the TV. The TV can wakeup on
a defined alarm time.
To set the alarm follow following steps:
1 - Press and select Guest menu and press OK.
2 - Select Alarm. To set the alarm select On.
3 - Select Alarm time and press OK. The time can be
changed by or . Select On to program the alarm
time that has been set.
4 - A Wakeup volume can be set. Adjust the slider
bar to set the desired volume level.
5 - A Wakeup tune can be selected. There are 4
predefined tunes available to select.
6 - Alternatively a Wakeup channel can be selected
from the list.
Alternatively, alarm time can be set by pressing the
ALARM button on the remote control.
43
12
Network
12.1
Network
12.2
Wireless network
What you need
To connect the TV wirelessly to the Internet, you need
a wireless router. Use a high-speed (broadband)
connection to the Internet.
Network devices
The TV can connect to other devices in your wireless
network, like your computer or smartphone. You can
use a computer with Microsoft Windows or Apple OS
X.
File sharing
On this TV, you can open photos, music and videos
stored on your computer. Use a recent version of
media server software like Philips MediaManager*,
Windows Media Player 11, Twonky™ or similar.
Install the media server software on your computer
and set it up to share your media files with the TV.
Read the manual of the media server software for
more information. This software must be running on
your computer to view or play your files on TV.
* You can download the Philips MediaManager
software from the Philips support
site www.philips.com/support
Make the connection
Follow steps 1 to 5.
Step 1 - Make sure that the router of your wireless
network is switched on.
Step 2 -
Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
Step 3 - Select Connect to network and press OK.
Step 4 - Select Connect and press OK.
Step 5 - Select Wireless and press OK.
Step 6 - Select Scan to scan for your wireless
network. If you have a router with WPS (Wi-Fi
Protected Setup), you can select WPS. Select your
choice and press OK.
• Scan
Select Scan to scan for your wireless network (your
wireless router). The TV might find several wireless
networks in your proximity.
• WPS
If your router has WPS, you can directly connect to
the router without scanning. Go to the router, press
the WPS button and return to the TV within 2 minutes.
Then press Connect to make the connection.
If you have devices in your wireless network that use
the WEP security encryption system, you cannot use
WPS.
If you must use the WPS PIN code to connect, select
Scan instead of WPS.
Step 7 - In the list of networks found, select your
wireless network and press OK.
If your network is not in the list because the network
name is hidden (you switched off the SSID broadcast
of the router), select Manual entry to enter the
network name yourself.
Step 8 - Depending on the type of router, you can
now enter your encryption key (WEP, WPA or WPA2).
If you entered the encryption key for this network
before, you can select Next to make the connection
immediately.
If your router supports WPS or WPS PIN, you select
WPS, WPS PIN or Standard. Select your choice and
press OK.
• Standard
Select Standard to enter the encryption key
(password, passphrase or security key) manually.You
can use the keyboard on the RC to enter the
encryption key. Once you have entered the key, press
Connect.
• WPS PIN
To make a secured WPS connection with a PIN code,
select WPS PIN and press OK. Write down the 8-digit
PIN code shown and enter it in the router software on
your PC. Return to the TV and press Connect. Consult
the router manual on where to enter the PIN code in
the router software.
Step 9 - A message will be shown when the
connection is successful.
Network configuration
If the connection fails, you can check the DHCP
44
setting of the router. DHCP should be set to On.
Alternatively, if you are an advanced user and want to
install your network with Static IP addressing, set the
TV to Static IP.
To set the TV to Static IP:
Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
Select Network settings > Network
settings > Network configuration > Static IP. With
Static IP selected in the menu, you can set the IP
address and other necessary settings in Static IP
configuration in the same menu.
Network problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
12.3
Wired network
What you need
You need a network router to connect the TV to the
Internet. Use a router with a high-speed (broadband)
connection to the Internet.
File sharing
On this TV, you can open photos, music and videos
stored on your computer. Use a recent version of
media server software like Philips MediaManager*,
Windows Media Player 11, Twonky™ or similar.
Install the media server software on your computer
and set it up to share your media files with the TV.
Read the manual of the media server software for
more information. This software must be running on
your computer to view or play your files on TV.
* You can download the Philips MediaManager
software from the Philips support
site www.philips.com/support
Connect the router
To connect and setup the router follow steps 1 to 5.
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
4 - Select Connect to network and press OK.
5 - Select Wired and press OK.
The TV constantly searches for the network
connection. A message will be shown when the
connection is successful.
Network configuration
If the connection fails, you can check the DHCP
setting of the router. DHCP should be set to On.
Alternatively, if you are an advanced user and want to
install your network with static IP addressing, set the
TV to Static IP.
To set the TV to Static IP:
Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu
Select Network settings > Network
settings > Network configuration > Static IP. With
Static IP selected in the menu, you can set the IP
address and other necessary settings in Static IP
configuration in the same menu.
**To fulfill EMC regulations, use a shielded FTP Cat.
5E Ethernet cable.
45
12.4
Network settings
To open the Network settings . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Network settings and press OK.
• View network settings
All current network settings are shown here. The IP
and MAC address, signal strength, speed, encryption
method, etc.
• Network settings
- Network type
Sets the network to Wired or Wireless.
- Network configuration
Sets the network configuration to DHCP or Static IP.
• Static IP configuration
If Static IP is selected in Network Settings menu, you
can set all necessary static IP settings here.
• Reset Wi-Fi Miracast group
Clear the list of connected and blocked devices that
are used with Miracast.
• Clear Internet memory
With Clear Internet memory, you can clear all Internet
files stored on your TV. You clear your Philips Smart
TV registration and parental rating settings, your
video store app logins, all Smart TV app favourites,
Internet bookmarks and history. Interactive MHEG
applications can also save so-called 'cookies', on
your TV. These files will also be cleared.
46
13
Your photos, videos
and music
13.1
From a USB connection or
computer
What you need
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard
Drive. If you have a computer in your home network,
you can view and play your files from your computer
on the TV.
From a USB device
With the TV switched on, plug in a USB flash drive or
USB Hard Drive to one of the USB connections. The
TV detects the device and lists your files.
If the list does not appear automatically, press
SOURCE, select Browse USB and press OK.
Warning
If you try to pause or record a programme with a USB
Hard Drive connected, the TV will ask you to format
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive.
Menu bar and sorting
With a USB device connected, the TV sorts the files by
type. Navigate to the menu bar and select the type of
file you are looking for.
If you browse files from a computer, you can only
browse the files and folders as they are organized on
the computer.
The menu bar
Navigate to the menu bar and select the type of file
you want to watch or play.
Select Photos , Music or Videos .
Alternatively, you can open the Folders view and
browse your folders to look for a file.
Sorting
To browse your photos by date, month, year or
alphabetically by name, press Sort .
To browse your music by album, artist, genre or
alphabetically by name, press Sort .
Videos are sorted alphabetically.
View photos
To view photos, select Photos in the menu bar,
select a photo thumbnail and press OK.
If there are several photos in the same folder, select a
photo and press Slide show to start a slide show
of all photos in this folder.
To jump to the next or previous photo, press CH
or CH .
To stop the slide show or close the photo, press .
You can play music with a slide show.
Start the slide show after you started the music.
1 - Select a song or a folder with songs and press OK.
2 - Press CHANNEL GRID and select Photos .
3 - Select a photo or a folder with photos and press
Slide show .
Info
To view info on a photo (size, creation date, file path,
etc.), select a photo and press INFO.
Press again to hide the info.
Options
Press OPTIONS.
• Shuffle
Shows your photos in a random order.
• Repeat
Plays the slide show continuously.
• Slide show speed
Sets the speed of the slide show.
• Slide show transition
Sets the style of the photo transitions.
To close Browse USB, press and select another
activity.
Play music
To play music, select Music in the menu bar,
select a song and press OK.
If there are more songs in the same folder, press
Play all to play all songs in this folder.
To jump to the next or previous song,
press CH or CH .
To pause the music, press OK. Press OK again to
continue.
To make a 10-second jump in a song or 10-second
jump back, press or .
To rewind or fast forward, press or . Press the
47
keys several times to speed up - 2x, 4x, 8x, 16x, 32x.
To stop the music playback, press (Stop).
If you press , the music keeps on playing.
Info
To view song info (title, artist, duration, etc.), select
the song and press INFO.
Press again to hide the info.
Options
Press OPTIONS.
• Shuffle
Plays your music randomly.
• Repeat
Plays the song once or continuously.
• Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
To switch off the screen, press OPTIONS, select
Eco settings in the menu bar, select Screen off and
press OK. To switch the screen back on, press any key
on the remote control.
To close Browse USB, press and select another
activity.
Play videos
To play a video, select Videos in the menu bar,
select a video and press OK.
If there are more videos in the same folder,
press Play all to play all videos in this folder.
To jump to the next or previous
video, press CH or CH .
To pause the video, press OK. Press OK again to
continue.
To make a 10-second jump forward or backward in a
video, press or .
To rewind or go fast forward, press or . Press
the keys several times to speed up - 2x, 4x, 8x, 16x,
32x.
To stop the video playback, press .
Info
To view info on a video (playhead position, duration,
title, date, etc.), select the video and press INFO.
Press again to hide the info.
Options
Press OPTIONS.
• Subtitles
If available, you can switch subtitles On, Off or On
during mute.
• Shuffle
Plays your videos in a random order.
• Repeat
Plays a video once or continuously.
To close Browse USB, press and select another
activity.
13.2
Wi-Fi Miracast
About Wi-Fi Miracast
Your TV is a Wi-Fi Certified Miracast™ device. With
Miracast™, you can watch and share the screen of
your smartphone, tablet or computer on your TV
screen wirelessly. You can stream videos (audio and
video), share photos or anything else that's on screen
of the device. No need to connect the device to your
home network. Both the TV and the device must be
Wi-Fi Certified Miracast™ devices and have Miracast
switched on.
For more information on Wi-Fi Certified Miracast™ go
to www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi
CERTIFIED Miracast™, Miracast™ are trademarks of
the Wi-Fi Alliance.
Switch on Miracast
The TV comes with Miracast switched On and is ready
to show the screen of a device with Miracast.
Switch off Miracast
If you do not want the TV to receive requests for
screen sharing from other devices, you can switch off
Miracast on the TV.
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Network settings > Wi-Fi
Miracast > Off and press OK.
3 - Press , repeatedly if necessary, to close the
menu.
4 - When Professional Mode: On a Miracast Icon
will be added in the Home Menu
48
Share a screen on TV
To share the screen of your smartphone, tablet or
computer on the TV . . .
1 - Switch on the TV.
2 - Professional Mode: On Press to open the
Home menu, select Miracast and press OK.
3 - On the device, open an application such as Wi-Fi
Miracast, Wi-Fi Direct™, Intel®Wireless Display* or
similar and start scanning for other Miracast devices.
4 - In the list of found devices, select the TV and
connect.
5 - On the TV, agree to the request to connect to
the TV. You might be asked to enter a PIN code from
the device on the TV - enter the numbers with the
digit keys on the remote control. Alternatively, you
might be asked by the TV to enter a PIN code on the
device. If you connect, the TV will show the screen of
the device.
6 - On the device, select the videos, photos or files
you want to watch on TV.
* Miracast is supported by WiDi 3.5 onwards.
Stop sharing
From the device
With the application you use to start Miracast, you
can disconnect and stop watching the screen of the
device on TV. The TV will switch back to the last
selected programme.
From the TV
To stop watching the screen of the device on TV, you
can . . .
• press TV to watch a TV broadcast
• press to start another activity on TV
• press SOURCE to open the Sources menu and
select a connected device.
Block a device
The first time you receive a request to connect from a
device, you can block the device. This request, and all
requests in the future, from this device, will be
ignored.
To block a device, select Block . . . in the request
window and press OK.
Unblock all devices
All previously connected and blocked devices are
stored in the Wi-Fi Miracast list of connections. If you
clear this list, all blocked devices will be unblocked.
To unblock all blocked devices . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Network settings > Reset Wi-Fi direct
group.
3 - Press OK to clear the list.
4 - Press , repeatedly if necessary, to close the
menu.
Blocking a previously connected device
If you want to block a device that you previously
connected, you need to clear the Wi-Fi Miracast
connections list first. If you clear this list, you will have
to confirm or block the connection for every device
again.
Screen delay
The normal delay when sharing a screen with
Miracast is about 1 second. The delay might be longer
if you are using older devices/computers with less
processing power.
Specifics
• Miracast on this TV is subject to the HDCP protocol
and cannot display copy-protected premium content
sent by a device.
• The maximum video resolution supported is 720p.
49
14
Skype
14.1
About Skype
With Skype™ you can make video calls on your TV for
free. You can call and see your friends from anywhere
in the world. Talk to your friends while watching them
on the big screen of your TV.
14.2
What you need
To make a video call on Skype, you need the
separately sold Philips PTA317 TV camera with a built-
in microphone and a good connection to the Internet.
Before you can start Skype, the TV must have a good
quality connection to the Internet. You can connect
your TV either wireless or wired.
Skype account
To use Skype, you need to create a Skype account for
yourself or for your family. You can create a new
account for Skype on your TV or on your computer.
Skype Credit or Skype Subscriptions
With Skype, for a little cost, you can also call phones
or mobile phones. Using your computer you can buy
Skype Credit or take a Skype subscription at
www.skype.com
No emergency calls
Skype is not a replacement for your telephone and
cannot be used for emergency calling.
14.3
Start with Skype
Install the camera
Connect the TV camera cable to one of the USB
connections on the TV.
Bend the small clamp as shown in the illustration
below and position the camera on the top of the TV.
Point the camera to the position you usually sit at.
When you are making a Skype call, you can pan, tilt or
zoom in or out the camera image.
You can position the camera anywhere you want but
it is recommended to put it away from the speakers of
the TV.
If the TV camera is not connected, Skype will not start.
Sign in
Sign in to Skype with your Skype Name and
password. If you don't have a Skype Name yet, you
have to create a new Skype account.
To sign in to Skype…
1 - Press to open the Home menu.
2 - Select Skype and press OK to start Skype and
open the Sign in page.
3 - Select the Skype Name text field and enter your
Skype Name. To open the on screen keyboard,
select the text field and press OK. If you have signed
in before, press GUIDE and select your Skype
Name. The TV remembers the 5 last Skype Names
that signed in.
4 - Select the Password text field and enter your
password.
5 - When done, select Sign in and press OK.
You are signed in if the Skype menu opens on screen.
Need help?
If you have forgotten your Skype Name or password,
or are having problems signing in, please visit
www.skype.com/support
New Skype account
If you don't have a Skype Name and Password yet,
you can create a new Skype account on your
computer. Once you have successfully created the
new account, you can use your Skype Name and
password to sign in on TV. To create a Skype account
on your computer, go to www.skype.com
If you have a remote control with an integrated
keyboard or have a USB keyboard connected to the
TV, you can create a new Skype account on your TV.
To create a new account on your TV…
1 - On the Skype Sign in page, select Create a new
account and press OK.
2 - On the next menu, select Open browser and
press OK.
3 - The TV opens the web page of www.skype.com
directly. You can create your new account on this
web page.
4 - When Skype confirms that your new account is
successfully created, leave the web browser and go
back to the Sign in page of Skype on TV.
5 - Enter your Skype name and Password to sign in.
Skype Name
A Skype Name must begin with a letter, upper or
lowercase. It must have 6 to 32 characters and can
contain numbers. A Skype Name cannot contain a
space.
Password
Your password must have 6 to 20 characters and
50
must at least contain one letter or one number. It
cannot contain special characters like a trademark,
bullet or euro sign. A Skype password cannot contain
a space.
If you don't have a Skype Name and Password yet,
you can create a new account on the sign in page on
TV.
1 - On the sign-in page, select New account and press
OK.
2 - Create your new account.
• Full name
Enter your full name.
• Skype name
Enter a name as your Skype name. Your Skype Name
will be shown in the list of contacts of other Skype
users. A Skype Name must begin with a letter, upper
or lowercase. It must have 6 to 32 characters and can
contain numbers. A Skype Name cannot contain a
space.
• Password
Enter your password. Your password must have 6 to
20 characters and must at least contain one letter or
one number. It cannot contain special characters like
a trademark, bullet or euro sign. A Skype password
cannot contain a space.
• Email
Enter your email address.
3 - Read and accept the Skype Terms of Use.
4 - If your new account was accepted, you are signed
in.
You can edit or complete your Skype profile on your
computer. Start Skype on your computer, sign in with
your Skype Name and Password and open your
Skype profile. You can change your profile picture,
add a mood message or set the privacy settings.
Microsoft account
If you have a Microsoft account, you can use this
account to sign in to Skype on TV.
To sign in with a Microsoft account…
1 - On the Skype Sign in page, select Sign in with
Microsoft account and press OK.
2 - Select Next and press OK. The TV will open the
Microsoft account sign in web page.
3 - Enter your Microsoft account email and
password.
4 - Select the Submit button and press OK.
No emergency calls
No emergency calls with Skype
Skype is not a replacement for your telephone and
cannot be used for emergency calling.
14.4
Skype menu
When you have signed in successfully, Skype opens
the Skype menu.
The Skype menu items are…
• My profile - your Skype name
To view or modify your Skype profile. Select your
Skype Name and press OK.
• People
In People, you can start making a Skype call and
manage your contacts.
• Call phones
In Call phones, you can call a landline or a mobile
phone number by dialing the number on a dial pad.
You must have Skype Credit or a Skype subscribtion
to call a phone number. You can't select Call phones
if a camera and microphone are not connected.
• History
In History, you can view your missed and former calls
or view Contact requests.
• Settings
In Settings, you can change your password, set your
privacy and voicemail settings or view your blocked
contacts and much more.
• Sign out
To sign out of Skype on TV.
51
14.5
My profile
In My profile, you can edit your personal profile for
Skype.
• Public
View or change your profile information that can be
viewed by your contacts.
• Phone
You can enter or change your home, office or mobile
phone number here.
• Private
View or change your email address, check the
amount of credit you have or view the subscription
information, or write a message that reflects your
mood.
• Profile picture
If you did not upload a profile picture with your
computer yet, you can select one of the available
avatars as Profile picture here.
• Online status
You can change your online status. Select the
status you want your contacts to see when you are
online.
14.6
People
Your contacts
In People, you can find the list of your Skype
contacts.
Your contacts are shown with their Skype
Name. Contacts are online and available for a Skype
call when a green dot is shown next their name.
You can use the text box in the top left corner of the
contact page to search for a contact within your
contact list. Or, simply scroll down the list to find the
contact you want.
Add a contact
Add a Skype contact
In People, the list of your contacts, you can add a
new Skype contact.
Add a Skype contact
If you know the Skype Name or email of a friend,
Skype can easily find your contact. If you do not
know their Skype Name or email, you can also try to
look for them by name.
To add a Skype contact…
1 - On the Contacts page, press OPTIONS.
2 - Select Add Skype Contact and press OK.
3 - Enter a Skype Name or email address of your
new contact. You can also try to enter a name. To
open the on screen keyboard, press OK. When you're
done, press OK.
4 - Skype will search for the contact you are looking
for and will show the search results.
5 - Select the contact you want and press OK to
send a contact request.
6 - Write the request and press OK. Skype will send
the request message to your new contact. If the
contact accepts the request, the Skype Name of the
new contact will appear in the your list and you can
call your contact on Skype.
Add a phone number
In People, the list of your contacts, you can add a
phone number as a contact. You can call a phone
with a Skype voice call. You need Skype Credits to
make a phone call.
To add a phone number…
1 - On the Contacts page, press OPTIONS.
2 - Select Add a Phone Number and press OK.
3 - Enter the name of your contact. To open the on
screen keyboard, press OK. When you're done, press
OK.
4 - Enter the phone number of your contact. Always
start with a country code (e.g. +31 for The
Netherlands). Do not use the double zero. When
you're done , press OK. The name of your phone
number contact will appear in your list.
Accept a contact request
When you receive a Contact request, a small icon will
show next to History in the Skype menu.
To accept a contact request…
1 - In the Skype menu, select History and press OK.
2 - Select Contact requests and press OK. Select the
52
request and press OK. Skype will ask you to accept
this contact. If you accept, the contact will appear in
your contact list.
Block a contact
You can Block a Skype contact. A blocked contact will
be unable to contact you on Skype. A blocked
contact will not be notified, you will appear as being
offline in the contact list of the blocked contact. You
can always unblock contacts you have blocked.
To block a contact…
1 - On the Contacts page, select the contact you
want to block.
2 - Press OPTIONS and select Block and press OK.
The contact is blocked.
To unblock a contact…
1 - Select a contact that is blocked.
2 - Press OPTIONS and select Unblock and press OK.
The contact is unblocked.
To view a list of blocked contacts…
1 - In the Skype menu, select Settings and press OK.
2 - Select Blocked contacts and press OK. The list
will show all contacts you have blocked.
Remove or rename
You can Remove or Rename contacts.
To remove a contact…
1 - On the Contacts page, select the contact you
want to remove.
2 - Press OPTIONS and select Remove and press OK.
The contact is removed from the list.
To rename a contact…
1 - On the Contacts page, select the contact you
want to rename.
2 - Press OPTIONS and select Rename and press
OK.
3 - Enter the new name for this contact in the text
field. To open the on screen keyboard, press OK.
When you're done, press OK.
14.7
Calling on Skype
Video or voice call
Make a Video call
Make a Video call to call and see your friends on your
TV screen.
To make a Video call…
1 - On the Contacts page, select the contact you
want to call.
2 - Select Video call and press OK. If your contact is
on Skype, has a Skype camera connected and
answers the call, you can see this person on TV.
3 - To end the call, select End call and press OK.
When your Skype camera is switched on, a blue
indicator LED lights up. You can check what your
contact can see in the small screen on the bottom
right of the TV screen.
To switch the Skype camera off, select Video Off
and press OK. To switch it back on, select Video On
and press OK.
To mute your microphone, select Mic Off and
press OK. To switch it back on, select Mic On and
press OK.
While you are making a video call, you can change
the viewpoint of the camera.
Make a Voice call
Make a Voice call to call without video, with the
camera switched off.
To make a Voice call…
1 - On the Contacts page, select the contact you
want to call.
2 - Select Call and press OK. If your contact is on
Skype and answers the call, you can talk to your
contact.
3 - To end the call, select End call and press OK.
A contact can add you to a voice call with more than
one participant. You cannot add an extra participant
yourself.
Calling phones
With Skype you can also call landline phones and
mobile phones. To call phones you need to buy
Skype Credit or a Skype subscription.
To call a phone…
1 - On the Contacts page, select a phone number
contact.
2 - Select Call and press OK. You must have Skype
Credits available or have a Skype subscription to
make a call with a phone number. If your contact
53
answers the phone, you can talk to your contact.
3 - To end the call, select End call and press OK.
With Skype, you can also call a phone number
directly. You can enter the phone number with the
dial pad.
To open the dial pad…
1 - In the Skype menu, select Call phones and press
OK.
2 - If the dial pad is not on screen, select Show
Dial Pad and press OK.
3 - Dial the phone number. You can navigate to the
numbers and press OK or use the number keys on the
remote control.
No emergency calls
Skype is not a replacement for your telephone and
cannot be used for emergency calling.
Receiving a call
When you are signed in to Skype and watching TV, a
ringtone and a message on screen will alert you of an
incoming call. The message will show who is calling
and you can answer or decline the call.
To answer the call, select Answer with video and
press OK.
To answer the call with the camera switched off,
select Answer with audio and press OK.
To decline the call, select Decline call and press OK.
History
In the History page of the Skype menu, you will find a
list of all calls you made, including the calls you
missed. You can also see new contact requests and
listen to voicemails.
To view a list, select All calls, Missed calls, Incoming
calls or Outgoing calls and press OK.
To view new contact requests, select Contact
requests and press OK.
To view and listen to your voicemails, select
Voicemails and press OK.
For how long your Skype events are kept in this
history list depends on the amount of contacts you
have and how intensively you use Skype.
Voicemail
About Voicemail
If someone calls you on Skype and you do not take
the call, he or she can leave a spoken message on
your Skype voicemail. If you call a contact and they
can't take the call, you can send a Skype voicemail to
your contact.
To send a voicemail or to receive a voicemail, you - or
your contact - must set up Skype voicemail first. You
can set up Voicemail on your computer. Go to
www.skype.com
When you made voicemail available for you on a
computer, set your voicemail preferences in the
Skype menu > Settings > Voicemails.
Record a Voicemail
When you call a contact and they can't take the call,
you can leave a voicemail.
To record a voicemail…
1 - Call a contact. If your call was not answered,
Skype will propose to send a Voicemail.
2 - Select Yes and speak your message.
3 - To stop recording, select End call and press OK.
Play a Voicemail
A contact can send a voicemail message to you. If a
voicemail was sent to you, a small icon will show on
the Skype menu. You can play a voicemail from the
History page.
To play a voicemail…
1 - In the Skype menu, select History and press OK.
2 - Select Voicemails and press OK.
3 - Select the voicemail you want to play and press
OK. You can listen to a voicemail as many times you
want. To manage your voicemails, press OPTIONS .
14.8
Skype credit
On Skype, you can buy Skype Credit or take a Skype
subscription. With Skype Credit or a Skype
subscription available, you can call landline phones
and mobile phones with your TV.
Buy Skype Credit
To buy Skype Credit or take a Skype subscription, sign
in to Skype on your computer.
The Skype Credit you buy will be available when you
sign in to Skype on your TV.
54
The amount of credit or the subscription information
is shown on each page where you can make a phone
call.
Skype Credit low
You will be notified if your credit is too low to make a
phone call.
14.9
Skype settings
Signing in
You can set Skype to automatically sign in when you
select Skype from the Home menu. You do not need
to enter your Skype Name or password.
To sign in when Skype starts…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Signing in and press OK.
4 - Press (right) to select the check box and press
OK to mark Sign me in when Skype starts.
Change password
You can change your current Skype password and
enter a new password for your Skype account.
To change your password…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Change password.
4 - Press (right) to select Current password and
enter your current password. Press OK first if you
want to use the on screen keyboard.
5 - Press (down) to select New password and
enter you new password.
6 - Press (down) again to select Repeat new
password and re-enter the new password.
7 - Press (down) again to select Apply to send
the new password for confirmation.
Video
You can set Skype to restrict the use of video in Skype
calls.
With Automatically receive video from, you can set
Skype to automatically receive and show video from
Anyone, People in my contact list only or from No
one.
With Show that I have video to, you can set Skype to
send out your video to People in my contact list only
or to No one.
To set the Video settings…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Video.
4 - Press (right) to select the radio buttons and
press OK to mark or unmark.
Privacy
You can set Skype to restrict incoming Skype calls.
You can allow calls from Anyone or from From
people in my contact list only.
To set the Privacy settings…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Privacy.
4 - Press (right) to select the radio buttons and
press OK to mark or unmark.
Blocked contacts
You can view a list of all your Blocked contacts.
To view the list…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Blocked contacts and press OK. To
manage your blocked contacts, press OPTIONS .
Voicemail
You can set some preferences for sending voicemails.
If you allow a contact to send you a voicemail when
you can't take the call, check the box of Send
unanswered calls to voicemail. Leave the box
unchecked, if you do not want to receive voicemails.
If you allow a contact to send you a voicemail when
you can't answer the call within 15 seconds and you
are in another call, check the box of I am already in a
call.
If you allow a voicemail, when you declined a call,
check the box of I decline an incoming call.
To set your preferences for voicemail…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Voicemail and press OK.
4 - Press (down) or (up) to select a check box.
Press OK to check or uncheck.
55
Call forwarding
Never miss a Skype call with Call Forwarding.
If you are not online or can't take the call, you can
forward a Skype call to any phone or mobile phone.
You can also forward a Skype call to another Skype
account. You can set up to three phone numbers or
Skype Names in order of preference to forward calls
to. You need Skype Credit or a Skype subscription to
forward calls to phones. Forwarding Skype calls to
other Skype accounts is free of charge. For more
information on call forwarding, go to
www.skype.com/support
To set up call forwarding…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Press OK to check the check box for Forward
calls when I am not on Skype.
4 - In the entry fields below, enter the phone
numbers or Skype Names from your contact list in
order of preference to forward your calls to. Always
add the country code for phone numbers.
5 - Change, if necessary, the amount of seconds
before Skype forwards your call.
6 - Select Save to store your Call Forwarding setup.
Camera zoom, pan and tilt
You can set the viewpoint of your camera. You can
zoom in or out, pan or tilt the camera frame. While
you are in a Video call, you can set the camera
viewpoint.
To set the camera viewpoint…
1 - Start a Video call and wait until the call is ongoing.
2 - Press (right) to select the icon above the small
screen and press OK. A bar with colour key functions
appears.
3 - To shift (pan) the camera frame, press (left) or
(right). To tilt the camera frame, press (up) or
(down). To zoom in, press Zoom in . To zoom
out, press Zoom out.
4 - Press Done to store the camera viewpoint
and to go back to your Skype call.
14.10
Sign out
When you sign out of Skype, you are signing out your
Skype account. Your Online status will change to
Offline. Your contacts will not be able to call you.
To sign out…
1 - Press Back from anywhere within Skype to
return to the Skype menu.
2 - Select Sign out in the Skype menu and press OK.
The TV will ask you to quit Skype or to use Skype with
another Skype account.
14.11
Quit Skype
When you sign out of Skype, the Skype application
on TV is still active. Another Skype account can sign in
or you can create a new account. To stop the Skype
application on TV, you must quit Skype.
14.12
Terms of use & Privacy Policy
Read the Terms of Use of Skype at
www.skype.com/go/tou
Also read the Privacy Policy at
www.skype.com/go/privacy
56
15
Smart TV
15.1
About Smart TV
Connect this Philips Smart LED TV to the Internet and
discover a new world of television. You can make a
wired connection to your router or you can link up
wirelessly with Wi-Fi.
With the TV connected to your home network, a
smartphone can show a photo on TV, you can play
videos stored on your computer or control the TV with
your tablet.
With your TV connected to the Internet, you can
watch a rental video from an online video store, read
the online TV guide. The Smart TV Apps add to the
fun with all sorts of entertainment and convenient
services.
15.2
What you need
To enjoy Smart TV Apps you must connect the TV to
a router with a high-speed (broadband) connection
to the Internet. You can use a home network
connected to the Internet. You do not need a
computer.
Tip
To enter text or to navigate an Internet page more
easily, you can consider to connect a USB keyboard
and a USB mouse to the TV.
15.3
Smart TV Apps
Open Smart TV
The Smart TV start page is your link to the Internet.
You can rent movies online, read newspapers, watch
videos and listen to music, also shop online, open
your social network page (Twitter . . .) or watch TV
programmes when it suits you with Online TV. To do
this, you open Apps - Internet sites which are tailored
for TV. With your TV connected to the Internet, you
can open Smart TV.
Open Smart TV
To open the Smart TV start page, press SMART TV.
Alternatively, you can press , select Smart TV and
press OK.
The TV connects to the Internet and opens the Smart
TV start page. This may take a few seconds.
Close Smart TV
To close the Smart TV start page, press and select
another activity.
TP Vision Europe B.V. bears no responsibility
regarding the content and the quality of the content
provided by the content service providers.
Smart TV start page
1 - Now on your TV
2 - Country Flags
3 - Recommended Apps
Country Flags
Apps are organized by Country. Select the desired
country flag to see the overview of available apps for
that profile.
Recommended Apps
In this window, Philips presents a range of
recommended Apps for your country, Apps for Online
TV or a selection of rental movies from Video stores.
You can select and open them from the
Recommended Apps window.
Open an App
The list of your Apps on the Smart TV start page can
be several pages long. Use the arrow keys to go to the
next or previous page. Alternatively, press CH
(Next page) or CH (Previous page).
Open an App
To open an App . . .
1 - Press and select Smart TV.
2 - On the start page, select the desired Country
Flag and Press OK.
3 - Select an App icon and press OK.
4 - In an App, press to go back 1 step or page.
Close an App
To close an App and return to the Smart TV start
page, press SMART TV.
Reload an App page
If an App page did not load properly, press OPTIONS
and select Reload to reload the page.
Zoom
To zoom in on an App page . . .
1 - Press OPTIONS and select Zoom page.
2 - Use the slider bar to set the zoom level.
3 - Return to normal view by resetting the slider bar.
View security info
57
You can check the security level of an App page.
On an App page, press OPTIONS and select Security
info. If a lock is shown next to the loading
animation on the bottom of the screen while loading
a page, the transfer is secured.
Rental video Apps
With the video store Apps in Smart TV, you can rent
your favourite movie from an online rental video
store. You can pay securely with your credit card.
Rent a movie
1 - Open a Video store App in your list of Apps or
select a recommended video on the Smart TV start
page.
2 - Select a movie.
3 - Make the online payment.
4 - Start watching. You can use the (Play) and
(Pause) keys.
Most Video stores ask you to create a login account.
Streaming video
With this TV, you can watch rental movies sent as a
streaming video format. You can almost instantly
watch the movie. You might need a USB Hard Drive to
store some video buffer. If you have a USB Hard
Drive connected, you can also download rental
movies from video stores that offer movie
downloading only. You can pause or restart a
downloaded rental movie. Consult the video store
regarding the rental duration of rental movies.
Internet traffic
Streaming or downloading many videos may exceed
your monthly Internet traffic limit.
Online TV
With the Online TV App on the Smart TV start page*,
you can watch TV programmes you missed or watch
programmes whenever it suits you best.
Open Online TV
To open the Online TV App . . .
1 - Press SMART TV.
2 - On the start page, select the Online TV icon
and press OK.
3 - Select a programme on the page and press OK to
start watching. You can use the (Play) and
(Pause) keys.
List per broadcaster
To view the Online TV programmes ordered by
broadcaster, press All broadcasters .
Select a broadcaster and press OK.
* If available in your region.
World Wide Web
The Internet App opens the World Wide Web on your
TV.
On your TV, you can view any Internet website but
most of them are not tailored for a TV screen.
• Some plug-ins (e.g. to view pages or videos) are not
available on your TV.
• Internet pages are shown one page at a time and
full screen.
15.4
Reset Smart TV
To reset your connection with Smart TV, clear the
Internet memory on the TV.
You will clear your Philips Smart TV registration and
parental rating setting, your video store app logins, all
Smart TV app favourites, Internet bookmarks and
history.
To clear the Internet memory . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Network settings > Clear Internet
memory and press OK.
58
16
Specifications
16.1
Environmental
Saving energy
The Eco settings bundle the settings that help the
environment.
While you are watching TV channels, press adjust
and select Eco settings to open Eco settings.
Active settings are marked with a . You can mark
or unmark each setting with the OK key.
Press again to close Eco settings .
Energy saving
This Picture style sets the picture in the most ideal
energy conscious setting.
Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
Select Screen off and press OK. To switch the
screen back on, press any key on the remote control.
Light sensor
To save energy, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, to the lighting
conditions of the room.
Switch off timer
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no signal for 10
minutes, the TV switches off automatically to save
energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, deactivate the
automatic switch off.
In addition to the Eco settings, your TV also has
environmentally friendly technology with regard to
power consumption.
Inactive devices off
Switch off connected EasyLink HDMI-CEC (Consumer
Electronic Control) compliant devices that are
inactive.
European energy label
The European Energy Label informs you on the
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the
lower the energy it consumes.
On the label, you can find the energy efficiency class,
the average power consumption of this product in use
and the average energy consumption for 1 year. You
can also find the power consumption values for this
product on the Philips website for your country at
www.philips.com/TV
End of use
Disposal of your old product and batteries
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. Correct disposal of your old
product helps to prevent potential negative
consequences for the environment and human
health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
for the environment and human health.
59
16.2
Reception
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband; S-Channel; UHF; VHF
• DVB :
- For models xxHFL5010: DVB-T2, DVB-T, DVB-C
• Analogue video playback : NTSC; SECAM; PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC
13818-2); MPEG4 SD/HD (ISO/IEC 14496-10)
• Digital audio playback (ISO/IEC 13818-3)
Note: See selected countries on the TV type plate
16.3
Display
Type
• Diagonal screen size :
- 70 cm / 28 inch
- 80 cm / 32 inch
- 100 cm / 40 inch
- 121 cm / 48 inch
- 139 cm / 55 inch
Display resolution: 1920x1080p
32HFL5010, 40HFL5010, 48HFL5010, 55HFL5010
Display resolution: 1365x768p
28HFL5010
Input resolution for HD/FHD TVs
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz
Computer formats
Resolutions (amongst others)
• 640 x 480p - 60 Hz
• 800 x 600p - 60 Hz
• 1024 x 768p - 60 Hz
• 1280 x 768p - 60 Hz
• 1360 x 765p - 60 Hz
• 1360 x 768p - 60 Hz
• 1280 x 1024p - 60 Hz
• 1920 x 1080p - 60 Hz
16.4
Power
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Power
• Mains power : AC 220-240V +/-10%
• Ambient temperature : 0°C to 40°C
• Standby power consumption : < 0.3W
• Power saving features : Energy saving, Screen off,
Light sensor*, Switch off timer, Inactive devices off.
The power rating stated on the product typeplate is
the power consumption for this product during
normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
used for electrical safety (IEC 60065 Ed. 7.2).
16.5
Dimensions and weights
28HFL5010
• without TV stand:
Width 635.1 mm - Height 392.7 mm - Depth 73.7 mm -
Weight ±4.5 kg
• with TV stand:
Width 635.1 mm - Height 441.1 mm - Depth 190 mm -
Weight ±5.07 kg
32HFL5010
• without TV stand:
Width 726.5 mm - Height 425.4 mm - Depth 76.8 mm
- Weight ±4.96 kg
• with TV stand:
Width 726.5 mm - Height 488.6 mm - Depth 179.2 mm
- Weight ±6.24 kg
40HFL5010
• without TV stand:
Width 903.5 mm - Height 511.8 mm - Depth 76.8 mm
- Weight ±7.7 kg
• with TV stand:
Width 903.5 mm - Height 573.8 mm - Depth 213.1 mm
- Weight ±9.1 kg
48HFL5010
• without TV stand:
Width 1081.8 mm - Height 623.4 mm - Depth 77.8 mm
- Weight ±12.4 kg
• with TV stand:
Width 1081.8 mm - Height 685.7 mm - Depth 249.4
mm - Weight ±13.9 kg
55HFL5010
• without TV stand:
Width 1239.2 mm - Height 711.6 mm - Depth 79.2 mm
60
- Weight ±15.1 kg
• with TV stand:
Width 1239.2 mm - Height 778.2 mm - Depth 265.8
mm - Weight ±17.5 kg
16.6
Wall mounting
• 28HFL5xx0 - VESA MIS-F 100x100, M4
• 32HFL5xx0 - VESA MIS-F 100x100, M4
• 40HFL5xx0 - VESA MIS-F 200x200, M4
• 48HFL5xx0 - VESA MIS-F 200x200, M6
• 55HFL5xx0 - VESA MIS-F 400x200, M6
Note:
Before mounting the TV on the wall, remove the
existing VESA screws on the back panel.
Warning:
Follow all instructions provided with the TV mount. TP
Vision Europe B.V. bears no responsibility for
improper TV mounting that results in accident, injury
or damage.
To prevent damage to cables and connectors, leave a
gap of at least 5.5 cm / 2.2 inches from the back of
the TV.
Before you mount the TV on the wall, find the correct
length of the screw. To find the length of the screw,
add the thickness of your wall mount to the screw
length (y), as shown in the graphic.
16.7
Connectivity
For 28HFL5010/32HFL5010/40HFL5010/
48HFL5010/55HFL5010
TV Rear
• Audio In (DVI/VGA): Stereo mini-jack 3.5mm
• SCART: Audio L/R, CVBS in, RGB
• YPbPr : Y Pb Pr, Audio L/R : Stereo mini-jack 3.5mm
• Digital Audio out: Optical, Toslink
• VGA
• 1x HDMI
• Bathroom speaker audio out
• DC out: 12V
• SXP
TV Side
• 1x HDMI
• 1x USB 2.0
• Common interface slot: CI+/CAM
• Headphones: Stereo mini-jack 3.5mm
16.8
Multimedia
Connections
• USB 2.0
• Ethernet LAN RJ-45*
• Wi-Fi 802.11b/g/n (built-in)*
Supported USB file systems
• FAT 16, FAT 32, NTFS
Playback formats
• Containers : 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS,
MPEG-4, Matroska (MKV), Quicktime (MOV, M4V,
M4A), Windows Media (ASF/WMV/WMA)
• Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2,
MPEG-4 Part 10 AVC (H264), VC-1, WMV9
• Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB,
Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital
Out™, MPEG-1/2/2.5 Layer I/II/III (includes MP3),
WMA (v2 to v9.2), WMA Pro (v9/v10)
• Subtitles :
– Formats : SAMI, SubRip (SRT), SubViewer (SUB),
MicroDVD (TXT), mplayer2 (TXT), TMPlayer (TXT)
– Character encodings : UTF-8, Central Europe and
Eastern Europe (Windows-1250), Cyrillic
(Windows-1251), Greek (Windows-1253), Turkish
(Windows-1254), Western Europe (Windows-1252)
• Image Codecs : JPEG
• Limitations :
– Maximum supported total bit rate for a media file is
30Mbps.
– Maximum supported video bit rate for a media file
is 20Mbps.
– MPEG-4 AVC (H.264) is supported up to High
Profile @ L4.1.
– VC-1 is supported up to Advanced Profile @ L3.
Wi-Fi Certified Miracast™*
This TV supports WiDi 4.x devices.
Supported media server software (DMS)*
• PC - Microsoft Windows XP, Vista or Windows 7
– You can use any DLNA certified® media server
software.
– Microsoft - Windows Media Player
• Mac OS X
– You can use any DLNA certified® media server
software.
• Mobile devices
– Philips MyRemote - iOS, Android
– Interoperability and performance may vary,
depending on the capabilities of the mobile device
and the software used.
ESD regulations
This apparatus meets performance criteria B for ESD.
In case the apparatus does not recover in file sharing
mode due to electrostatic discharge, user interference
is required.
* Only for Smart TVs.
61
17
Software
17.1
Software update
Update from USB
It might be necessary to update the TV software. You
need a computer with an high-speed Internet
connection and a USB memory device to upload the
software on the TV. Use a USB memory device with
256MB free space. Make sure that write protection is
switched off.
1 - To Start the update on TV
Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Identify the TV
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
3 - Download the TV software
Insert the USB memory into your computer.
On the USB memory device, locate the
file update.htm and double click it.
Click on Send ID.
If new software is available, download the .zip file.
After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
If a power cut occurs during the update, never
remove the USB memory device from the TV. When
the power returns, the update will continue.
At the end of the update, the message Operation
successful appears on screen. Remove the USB
memory device and press on the remote control.
Do not . . .
• press twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then
back on again. Please wait.
The TV software has been updated. You can use the
TV again.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB memory
device.
Update from Internet
If the TV is connected to the Internet, you may receive
a message from TP Vision to update the TV software.
You need a high-speed (broadband) Internet
connection.
If you receive this message, we recommend you carry
out the update.
Select Update. Follow the instructions on screen.
You can also look for new updates yourself.
To look for an update . . .
1 - Press and select Setup and press OK.
2 - Select Update software > TV with Internet, then
press OK. Follow the instructions on screen.
When the update is complete, the TV switches off and
back on again automatically.
Wait for the TV to switch itself back on.
Do not press the Power switch on the TV.
17.2
Software version
To view the current TV software version . . .
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select Software settings and press OK.
3 - Select Current software info and
see Release Version .
4 - Press , repeatedly if necessary, to close the
menu.
17.3
Open source software
This television contains open source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
offer is requested by the respective licences.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to .
. .
Intellectual Property Dept.
TP Vision Europe B.V.
62
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
17.4
Open source license
Acknowledgements and License Texts for any open
source software used in this Philips TV.
This is a document describing the distribution of the
source code used on the Philips TV, which fall either
under the GNU General Public License (the GPL), or
the GNU Lesser General Public License (the LGPL), or
any other open source license. Instructions to obtain
source code for this software can be found in the user
manual.
PHILIPS MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. Philips offers no support for this
software. The preceding does not affect your
warranties and statutory rights regarding any Philips
product(s) you purchased. It only applies to this
source code made available to you.
Freetype (2.4.3)
FreeType is a software font engine that is designed to
be small, efficient, highly customizable, and portable
while capable of producing high-quality output
(glyph images).
This piece of software is made available under the
terms and conditions of the FreeType Project license,
which can be found below.
Source: http://freetype.sourceforge.net
zlib (1.2.3)
The 'zlib' compression library provides in-memory
compression and decompression functions, including
integrity checks of the uncompressed data.
This piece of software is made available under the
terms and conditions of the zlib license, which can be
found below.
Source: http://www.zlib.net/
Fraunhofer AAC Ecnoder (3.3.3)
AAC Ecnoder.
Source: Android JB source code
unicode (3.2)
This library is used to perform UNICODE string
manipulation.
This piece of software is made available under the
terms and conditions of the ICU license, which can be
found below.
Source: http://www.icu-project.org/
libpng (1.2.43)
PNG decoder.
This piece of software is made available under the
terms and conditions of the libpng license, which can
be found below.
Source: http://www.libpng.org/pub/png/libpng.html
libjpg (6b)
This library is used to perform JPEG decoding tasks.
This piece of software is made available under the
terms and conditions of the libjpg license, which can
be found below.
Source: http://www.ijg.org/
libmng (1.0.10)
libmng -THE reference library for reading, displaying,
writing and examining Multiple-Image Network
Graphics.MNG is the animation extension to the
popular PNG image-format.
This piece of software is made available under the
terms and conditions of the libmng license, which can
be found below.
Source:
http://sourceforge.net/projects/libmng/files/
u-Boot loader (1.3.4)
Used by boot loader and only linked with boot
loader, GPL license.
This piece of software is made available under the
terms and conditions of the u-Boot loader license,
which can be found below.
Source: http://sourceforge.net/projects/u-boot/files/
u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download
Libcurl (7.21.7)
HTTP client;libcurl is a free and easy-to-use client-
side URL transfer library, supporting FTP, FTPS, HTTP,
HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,
LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl
supports SSL certificates, HTTP POST, HTTP PUT, FTP
uploading, HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM,
Negotiate, Kerberos4), file transfer resume, http proxy
tunneling and more!
This piece of software is made available under the
terms and conditions of the Libcurl license, which can
be found below.
Source: http://curl.haxx.se/
c-ares (1.7.4)
c-ares is a C library that performs DNS requests and
name resolves asynchronously.
This piece of software is made available under the
terms and conditions of the c-ares license, which can
be found below.
Source: http://c-ares.haxx.se/c-ares-1.7.1.tar.gz
openssl (1.0.0d)
OpenSSL is an open source implementation of the
SSL and TLS protocols. The core library (written in the
63
C programming language) implements the basic
cryptographic functions and provides various utility
functions. Wrappers allowing the use of the OpenSSL
library in a variety of computer languages are
available.
This piece of software is made available under the
terms and conditions of the 1.7.4 license, which can be
found below.
Source:
http://www.openssl.org/source/openssl-1.0.0.tar.gz
Expat (2.01)
xml paser; Expat is an XML parser library written in C.
It is a stream-oriented parser in which an application
registers handlers for things the parser might find in
the XML document (like start tags). An introductory
article on using.
This piece of software is made available under the
terms and conditions of the Expat license, which can
be found below.
Source: http://expat.sourceforge.net/
DirectFB include SAWMAN (1.4.0)
It is a software library for GNU/Linux/UNIX based
operating system with a small memory footprint that
provides graphics acceleration, input device handling
and abstraction layer, and integrated windowing
system with support for translucent windows and
multiple display layers on top of the Linux
framebuffer without requiring any kernel
modifications.
This piece of software is made available under the
terms and conditions of the DirectFB license, which
can be found below.
Source: http://sourceforge.net/projects/jointspace/fil
es/remote_applications_SDK/remote_spplications_S
DK_v1.3.1/DirectFB141_source_1.3.1.7z/download
SAWMAN
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
Source: http://squashfs.sourceforge.net/
Linux Kernel (3.0)
The Linux kernel is an operating system kernel used
by the Linux family of Unix-like operating systems.
This piece of software is made available under the
terms and conditions of the Linux Kernel license,
which can be found below.
Source: http://www.kernel.org
SQLite (3.7.2)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
This piece of software is made available under the
terms and conditions of the SQLite license, which can
be found below.
Source: http://www.sqlite.org/download.html
SquashFS (3.4)
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the
terms and conditions of the SquashFS license, which
can be found below.
Source: http://squashfs.sourceforge.net/
glibc (2.6.1)
Any Unix-like operating system needs a C library: the
library which defines the ``system calls'' and other
basic facilities such as open, malloc, printf, exit...The
GNU C library is used as the C library in the GNU
system and most systems with the Linux kernel
This piece of software is made available under the
terms and conditions of the glibc license, which can
be found below.
Source: http://www.gnu.org/software/libc/
mtd-utils (1)
The aim of the system is to make it simple to provide
a driver for new hardware, by providing a generic
interface between the hardware drivers and the upper
layers of the system. Hardware drivers need to know
nothing about the storage formats used, such as FTL,
FFS2, etc., but will only need to provide simple
routines for read, write and erase. Presentation of the
device's contents to the user in an appropriate form
will be handled by the upper layers of the system.
This piece of software is made available under the
terms and conditions of the mtd-utils license, which
can be found below.
Source: http://www.linux-
mtd.infradead.org/index.html
libusb (1.0.6)
This is the home of libusb, a library that gives user
level applications uniform access to USB devices
across many different operating systems. libusb is an
open source project licensed under the GNU Lesser
General Public License version 2.1.Many participants
in the libusb community have helped and continue to
help with ideas, implementation, support and
improvements for libusb.
This piece of software is made available under the
terms and conditions of the libusb license, which can
be found below.
Source:
http://libusb.wiki.sourceforge.net
http://www.libusb.org/
libusb-compat (0.1.3)
64
Library to enable user space application programs to
communicate with USB devices.
This piece of software is made available under the
terms and conditions of the libusb-compat license,
which can be found below.
Source:
http://libusb.wiki.sourceforge.net/LibusbCompat0.1
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform
implementation of the Microsoft Windows NTFS file
system with read-write support. NTFS-3G often uses
the FUSE file system interface, so it can run
unmodified on many different operating systems. It is
runnable on Linux, FreeBSD, NetBSD, OpenSolaris,
BeOS, QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed under
either the GNU General Public License or a
proprietary license. It is a partial fork of ntfsprogs and
is under active maintenance and development.
This piece of software is made available under the
terms and conditions of the NTFS-3G Read/Write
Driver license, which can be found below.
Source: http://www.tuxera.com
WPA Supplicant (0.5.10 & 0.6.7)
These packages are used to provide WiFi access.The
supplier for these tools is Atheros.These pieces of
software are made available under the terms and
conditions of the GPL v2 license, which can be found
below.
This piece of software is made available under the
terms and conditions of the WPA Supplicant license,
which can be found below.
Source: http://hostap.epitest.fi/wpa_supplicant/
ntfsprogs (2.0.0)
Some useful tool for ntfs file sytem.
This piece of software is made available under the
terms and conditions of the ntfsprogs license, which
can be found below.
Source: http://sourceforge.net/projects/linux-ntfs
fuse (2.8.4)
Fuse is a simple interface for userspace programs to
export a virtual filesystem to the linux kernel.
This piece of software is made available under the
terms and conditions of the fuse license, which can
be found below.
Source: http://fuse.sourceforge.net/
libiconv (1.11.1)
This library provides an iconv() implementation, for
use on systems which don't have one, or whose
implementation cannot convert from/to Unicode. .
This piece of software is made available under the
terms and conditions of the libiconv license, which
can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
electric-fence (2.1.13)
Used for memory corruption detection.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: http://perens.com/FreeSoftware/ElectricFenc
e/electric-fence_2.1.13-0.1.tar.gz
liveMedia
When Wifi Display or streaming RtspPlayer are
enabled.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: www.live555.com
QT (4.7.0)
Netflix skpe besttv pandora picasa? will use QT.
This piece of software is made available under the
terms and conditions of the QT license, which can be
found below.
Source: http://qt.nokia.com/
e2fsprogs (1.41.14)
e2fsprogs provides the filesystem utilities for use with
the ext2 filesystem, it also supports the ext3 and ext4
filesystems.
This piece of software is made available under the
terms and conditions of the e2fsprogs license, which
can be found below.
Source: http://e2fsprogs.sourceforge.net/
alsa (1.0.24.1)
Advanced Linux Sound Architecture (ALSA).
This piece of software is made available under the
terms and conditions of the alsa license, which can be
found below.
Source: http://www.alsa-project.org
lvm2 (2.02.89)
DM_VERITY.
This piece of software is made available under the
terms and conditions of the lvm2 license, which can
be found below.
Source:
ftp://sources.redhat.com/pub/lvm2/releases/
encfs (1.3.2)
A library provides an encrypted filesystem in user-
space.
Source: http://www.arg0.net/encfs
boost (1.15.0)
A library provides free peer-reviewed portable C++
source libraries is used for encfs.
Source: http://www.boost.org
rlog (1.4)
A library that provides a flexible message logging
facility for C programs and libraries is used for encfs.
65
Source: http://www.arg0.net/rlog
iptables (1.4.15)
For Cross connection.
Source: http://www.netfilter.org/projects/iptables/
bash (3.2.48)
Bash is the shell, or command language interpreter,
that will appear in the GNU operating system.
Bash is an sh-compatible shell that incorporates
useful features from the Korn shell (ksh) and C shell
(csh).
It is intended to conform to the IEEE POSIX
P1003.2/ISO 9945.2 Shell and Tools standard.
It offers functional improvements over sh for both
programming and interactive use.
In addition, most sh scripts can be run by Bash
without modification.
Source: http://www.gnu.org/software/bash/
coreutils (6.9)
The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
These are the core utilities which are expected to
exist on every operating system.
Source: http://www.gnu.org/software/coreutils/
findutils (4.2.31)
The GNU Find Utilities are the basic directory
searching utilities of the GNU operating system.
These programs are typically used in conjunction with
other programs to provide modular and powerful
directory search and file locating capabilities to other
commands.
Source: http://www.gnu.org/software/findutils/
gawk (3.1.5)
If you are like many computer users, you would
frequently like to make changes in various text files
wherever certain patterns appear, or extract data from
parts of certain lines while discarding the rest.
To write a program to do this in a language such as C
or Pascal is a time-consuming inconvenience that
may take many lines of code.
The job is easy with awk, especially the GNU
implementation: gawk.
Source: http://www.gnu.org/software/gawk/
grep (2.5.1a)
The grep command searches one or more input files
for lines containing a match to a specified pattern. By
default, grep prints the matching lines.
Source: http://www.gnu.org/software/grep/
gzip (1.3.12)
GNU Gzip is a popular data compression program
originally written by Jean-loup Gailly for the GNU
project. Mark Adler wrote the decompression part.
Source: http://www.gnu.org/software/gzip/
inetutils (1.4.2)
Inetutils is a collection of common network
programs.
Source: http://www.gnu.org/software/inetutils/
iputils (s20101006)
The iputils package is set of small useful utilities for
Linux networking. It was originally maintained by
Alexey Kuznetsov.
Source: http://www.skbuff.net/iputils/
module-init-tools (3.12)
Provides developer documentation for the utilities
used by Linux systems to load and manage kernel
modules (commonly referred to as "drivers").
Source: https://modules.wiki.kernel.org/index.php/M
ain_Page
ncurses (5.7)
The Ncurses (new curses) library is a free software
emulation of curses in System V Release 4.0, and
more.
It uses Terminfo format, supports pads and color and
multiple highlights and forms characters and function-
key mapping, and has all the other SYSV-curses
enhancements over BSD Curses.
Source: http://www.gnu.org/software/ncurses/
net-tools (1.6)
The Net-tools?package is a collection of programs for
controlling the network subsystem of the Linux
kernel.
Source: http://www.linuxfromscratch.org/blfs/view/6.
3/basicnet/net-tools.html
procps (ps, top) (3.2.8)
procps is the package that has a bunch of small
useful utilities that give information about processes
using the /proc filesystem.
The package includes the programs ps, top, vmstat, w,
kill, free, slabtop, and skill.
Source: http://procps.sourceforge.net/index.html
psmisc (22.13)
This PSmisc package is a set of some small useful
utilities that use the proc filesystem. We're not about
changing the world, but providing the system
administrator with some help in common tasks.
Source: http://psmisc.sourceforge.net/
sed (4.1.5)
sed (stream editor) isn't an interactive text editor.
Instead, it is used to filter text, i.e., it takes text input,
performs some operation (or set of operations) on it,
and outputs the modified text.
sed is typically used for extracting part of a file using
pattern matching or substituting multiple occurrences
of a string within a file.
Source: http://www.gnu.org/software/sed/
66
tar (1.17)
GNU Tar provides the ability to create tar archives, as
well as various other kinds of manipulation.
For example, you can use Tar on previously created
archives to extract files, to store additional files, or to
update or list files which were already stored.
Source: http://www.gnu.org/software/tar/
util-linux-ng (2.18)
Various system utilities.
Source: http://userweb.kernel.org/~kzak/util-linux-
ng/
udhcpc (0.9.8cvs20050303-3)
Udhcpc is a very small?DHCP?client geared
towards?embedded systems.
Source: http://udhcp.sourcearchive.com/downloads/
0.9.8cvs20050303-3/
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a support
for the execution of NCL application. This library was
developed for the GNOME software suite and is
available under a "MIT" license.
Source: http://www.xmlsoft.org
uriparser (0.7.7)
For MPEG-DASH
Source: http://uriparser.sourceforge.net/
xerces-c++ (3.1.1)
For MPEG-DASH
Source: http://xerces.apache.org/
webp (0.2.1)
For Netflix
Source: https://code.google.com/p/webp/
wget (1.10.2)
GNU Wget is a free software package for retrieving
files using HTTP, HTTPS and FTP, the most widely-
used Internet protocols.
It is a non-interactive commandline tool, so it may
easily be called from scripts,?cron?jobs, terminals
without X-Windows support, etc.
Source:
http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
wireless_tools (0.29)
The Wireless Tools (WT)?is a set of tools allowing to
manipulate the Wireless Extensions.
They use a textual interface and are rather crude, but
aim to support the full Wireless Extension.
Source: http://www.hpl.hp.com/personal/Jean_Tourri
lhes/Linux/Tools.html
ezxml (0.8.6)
ezXML is a C library for parsing XML documents. Used
inside Philips libraries.
Source: http://sourceforge.net/projects/ezxml/
SQLite (3.7.7.1)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
Source: http://www.sqlite.org/download.html
AES (aes-src-29-04-09.zip)
Advanced Encryption Standard (AES) is a
specification for the encryption of electronic data.
Used inside Philips libraries.
Source: http://gladman.plushost.co.uk/oldsite/AES/
microhttpd (libmicrohttpd-0.9.9.tar.gz)
GNU libmicrohttpd is a small C library that is
supposed to make it easy to run an HTTP server as
part of another application.
The original download site for this software is :
http://www.gnu.org/software/libmicrohttpd/This
piece of software is made available under the terms
and conditions of the LGPL v2.1 license
Source: http://ftp.gnu.org/gnu/libmicrohttpd/libmicro
httpd-0.9.9.tar.gz
yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)
YAJL is a small event-driven (SAX-style) JSON parser
written in ANSI C, and a small validating JSON
generator. YAJL is released under the ISC license.
The original download site for this software is :
http://lloyd.github.com/yajl/This piece of software is
made available under the terms and conditions of the
ISC license
Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/
lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21
82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz
HMAC-SHA1 (0.1)
keyed-hash message authentication code (HMAC) is
a specific construction for calculating a message
authentication code (MAC) involving a cryptographic
hash function in combination with a secret
cryptographic key.
As with any MAC, it may be used to simultaneously
verify both the data integrity and the authentication
of a message.
Any cryptographic hash function, such as MD5 or
SHA-1, may be used in the calculation of an HMAC;
the resulting MAC algorithm is termed HMAC-MD5 or
HMAC-SHA1 accordingly.
Source:
http://www.deadhat.com/wlancrypto/hmac_sha1.c
gSoap (2.7.15)
The gSOAP toolkit is an open source C and C++
software development toolkit for SOAP/XML Web
services and generic (non-SOAP) C/C++ XML data
bindings.
Part of the software embedded in this product is
gSOAP software. Portions created by gSOAP are
Copyright 2000-2011 Robert A. van Engelen, Genivia
67
inc. All Rights Reserved.
Source: http://sourceforge.net/projects/gsoap2/
jquery (1.10.2)
jQuery is a fast and concise JavaScript Library that
simplifies HTML document traversing, event handling,
animating, and Ajax interactions for rapid web
development.
Source: http://jquery.com/
Libupnp (1.2.1)
The Linux* SDK for UPnP* Devices (libupnp) provides
developers with an API and open source code for
building control points, devices, and bridges that are
compliant with Version 1.0 of the UPnP Device
Architecture Specification.
Source: http://upnp.sourceforge.net/
mDNSResponder (mDNSResponder-320.10.80)
The mDNSResponder project is a component of
Bonjour,
Apple's ease-of-use IP networking
initiative:<http://developer.apple.com/bonjour/>
In our project, Bonjour is used for the automatic
discovery of devices and services
Source: http://developer.apple.com/bonjour/
68
18
Troubleshooting
and support
18.1
Troubleshooting
Channels
No digital channels found during the installation
See the technical specifications to make sure that
your TV supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected.
Previously installed channels are not in the channel
list
Make sure that the correct channel list is selected.
General
The TV does not switch on
• Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
• Make sure that the power cable is securely
connected.
Creaking sound at startup or switch off
When you are turning the TV on, off or to standby,
you hear a creaking sound from the TV chassis. The
creaking sound is due to the normal expansion and
contraction of the TV as it cools and warms up. This
does not affect performance.
TV does not respond to the remote control
The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behaviour.
If the TV continues to be unresponsive to the remote
control, you can check if the remote control is working
by means of a mobile phone camera. Put the phone
in camera mode and point the remote control to the
camera lens. If you press any key on the remote
control and you notice the infra red LED flicker
through the camera, the remote control is working.
The TV needs to be checked.
If you do not notice the flickering, the remote control
might be broken or its batteries are low.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
The TV goes back to standby after showing the
Philips startup screen
When the TV is in standby, a Philips startup screen is
displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
and reconnected to the power supply, the startup
screen is displayed at the next startup. To switch on
the TV from standby, press on the remote control or
the TV.
The standby light keeps on blinking
Disconnect the power cable from the power outlet.
Wait 5 minutes before you reconnect the power
cable. If the blinking reoccurs, contact Philips TV
Consumer Care.
Wrong menu language
Change the language back to your language.
1 - Professional Mode: Off Press and
select Setup and press OK.
Professional Mode: On Enter the Professional
Home Menu.
2 - Select TV settings > General settings > Menu
language and press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Picture
No picture / distorted picture
• Make sure that the antenna is properly connected to
the TV.
• Make sure that the correct device is selected as the
display source.
• Make sure that the external device or source is
properly connected.
Sound but no picture
• Make sure that the picture settings are set correctly.
Poor antenna reception
• Make sure that the antenna is properly connected to
the TV.
• Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality. If possible, try to improve
the reception quality by changing the antenna
direction or moving devices away from the TV.
• If reception on only one channel is poor, fine-tune
this channel.
Poor picture from a device
• Make sure that the device is connected properly.
• Make sure that the picture settings are set correctly.
Picture settings change after a while
Make sure that [Location] is set to [Home] . You can
change and save settings in this mode.
A commercial banner appears
Make sure that [Location] is set to [Home].
Picture does not fit the screen
69
Change to a different picture format. Press FORMAT.
Picture format keeps changing with different
channels
Select a non 'Auto' picture format.
Picture position is incorrect
Picture signals from some devices may not fit the
screen correctly. Check the signal output of the
connected device.
Computer picture is not stable
Make sure that your PC uses the supported resolution
and refresh rate.
Sound
No sound or poor sound quality
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
• Make sure that the sound settings are correctly set.
• Make sure that all cables are properly connected.
• Make sure that the volume is not muted or set to
zero.
• Make sure that the TV audio output is connected to
the audio input on the Home Theatre System.
Sound should be heard from the HTS speakers.
• Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
Connections
HDMI
• Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
• If the TV does not recognise the HDMI device and
no picture is displayed, switch the source from one
device to another and back again.
• If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
• If you use an HDMI-to-DVI adapter or HDMI-to-DVI
cable, make sure that an additional audio cable is
connected to AUDIO IN (mini-jack only), if available.
EasyLink does not work
• Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
No volume icon shown
• When a HDMI-CEC audio device is connected this
behaviour is normal.
Photos, videos and music from a USB device do not
show
• Make sure that the USB storage device is set to Mass
Storage Class compliant, as described in the storage
device's documentation.
• Make sure that the USB storage device is compatible
with the TV.
• Make sure that the audio and picture file formats are
supported by the TV.
Choppy playback of USB files
• The transfer performance of the USB storage device
may limit the data transfer rate to the TV which
causes poor playback.
18.2
Register
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
Go to www.philips.com/welcome
18.3
Online help
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support .
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our colaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
18.4
Consumer Care / Repair
For support and repair, call the Consumer Care
hotline in your country. Find the telephone number in
the printed documentation that came with the TV.
Or consult our website www.philips.com/support .
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
70
the packaging label or on the type label on the back
or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irrepairable damage to your TV
or void your warranty.
71
19
Safety and care
19.1
Safety
Important
Read and understand all safety instructions before
you use the TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Secure the TV from falling over
Always use the supplied wall bracket to secure the TV
from falling over. Mount the bracket and secure the
TV onto the bracket, even if you put the TV on the
floor.
You can find the mounting instructions in the Quick
Start Guide that came with the TV. In case you lost
this guide, you can download the guide from
www.philips.com
Use the product type number of the TV to look for the
Quick Start Guide to download.
Risk of electric shock or fire
• Never expose the TV to rain or water. Never place
liquid containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips TV Consumer Care to have the TV
checked before use.
• Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning
candles, naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation slots or other
openings on the TV.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
exerted on the power cord when you swivel the TV
screen.
• To disconnect the TV from the mains power, the
power plug of the TV must be disconnected. When
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
Risk of injury or damage to the TV
• Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
• When wall mounted, ensure that the wall mount can
safely bear the weight of the TV set. TP Vision bears
no responsibility for improper wall mounting that
results in accident, injury or damage.
• Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Risk of damage to the TV !
Before you connect the TV to the power outlet,
ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
to the power outlet if the voltage is different.
Risk of injury to children
Follow these precautions to prevent the TV from
toppling over and causing injury to children:
• Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of
the mounting surface.
• Never place the TV on tall furniture, such as a
bookcase, without anchoring both the furniture and
TV to the wall or a suitable support.
• Teach children about the dangers of climbing on
furniture to reach the TV.
Risk of swallowing batteries !
The remote control may contain coin-type batteries
which can easily be swallowed by small children.
Keep these batteries out of reach of children at all
times.
Risk of overheating
Never install the TV in a confined space. Always leave
a space of at least 10 cm or 4 inches around the TV
for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
72
Lightning storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or
41°F, unpack the TV and wait until the TV temperature
reaches room temperature before connecting the TV
to the power outlet.
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
19.2
Screen care
• Never touch, push, rub or strike the screen with any
object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
• To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
• Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
73
20
Terms of use,
copyrights and
licenses
20.1
Terms of use
2015 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter
referred to as TP Vision, which is the manufacturer of
the product. TP Vision is the warrantor in relation to
the TV with which this booklet was packaged. Philips
and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V
or their respective owners. TP Vision reserves the right
to change products at any time without being obliged
to adjust earlier supplies accordingly.
The written material packaged with the TV and the
manual stored in the memory of the TV or
downloaded from the Philips website are believed to
be adequate for the intended use of the system.
The material in this manual is believed adequate for
the intended use of the system. If the product, or its
individual modules or procedures, are used for
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision Europe B.V. warrants that the
material itself does not infringe any United States
patents. No further warranty is expressed or implied.
TP Vision Europe B.V. cannot be held responsible
neither for any errors in the content of this document
nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted
and published on the Philips support website as soon
as possible. Terms of warranty Risk of injury, damage
to TV or void of warranty! Never attempt to repair the
TV yourself. Use the TV and accessories only as
intended by the manufacturer. The caution sign
printed on the back of the TV indicates risk of electric
shock. Never remove the TV cover. Always contact
Philips TV Customer Care for service or repairs. Any
operation expressly prohibited in this manual, or any
adjustments and assembly procedures not
recommended or authorised in this manual, shall void
the warranty. Pixel characteristics This LCD/LED
product has a high number of colour pixels. Although
it has effective pixels of 99.999% or more, black dots
or bright points of light (red, green or blue) may
appear constantly on the screen. This is a structural
property of the display (within common industry
standards) and is not a malfunction. CE compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/EC
(EMC) and 2011/65/EU (ROHS). Compliance with EMF
TP Vision Europe B.V. manufactures and sells many
products targeted at consumers which, like any
electronic apparatus, in general have the ability to
emit and receive electromagnetic signals. One of
Philips’ leading Business Principles is to take all
necessary health and safety measures for our
products, to comply with all applicable legal
requirements and to stay well within the Electro
Magnetic Field (EMF) standards applicable at the
time of producing the products. Philips is committed
to develop, produce and market products that cause
no adverse health effects. TP Vision confirms that, as
long as its products are handled properly for their
intended use, they are safe to use according to
scientific evidence available today. Philips plays an
active role in the development of international EMF
and safety standards, enabling Philips to anticipate
further developments in standardisation for early
integration in its products.
20.2
Copyrights and licenses
HDMI
HDMI®
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Dolby
Dolby®
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
74
DTS 2.0 + Digital Out ™
DTS 2.0 + Digital Out™
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 and other U.S. and
worldwide patents issued and pending. DTS, the
Symbol, and DTS and the Symbol together are
registered trademarks and DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software. ©
DTS, Inc. All Rights Reserved.
Skype
Skype™
© 2013 Skype and/or Microsoft. The Skype name,
associated trade marks and logos and the "S" logo are
trade marks of Skype or related entities.
Skype is a trademark of Skype or its related
companies. Although this product has been tested
and met our certification standards for audio and
video quality, it is not endorsed by Skype, Skype
Communications S.a.r.l. or any of their related
companies.
DLNA Certified®
© 2013 Digital Living Network Alliance. All rights
reserved.
© 2013 DLNA. All rights reserved.
Java
Java and all Java based trademarks are registered
trademarks of Oracle and/or its affiliates, in the United
States and other countries.
Microsoft
Windows Media
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
Microsoft PlayReady
Content owners use Microsoft PlayReady™ content
access technology to protect their intellectual
property, including copyrighted content.
This device uses PlayReady technology to access
PlayReady-protected content and/or WMDRM-
protected content. If the device fails to properly
enforce restrictions on content usage, content owners
may require Microsoft to revoke the device's ability to
consume PlayReady-protected content. Revocation
should not affect unprotected content or content
protected by other content access technologies.
Content owners may require you to upgrade
PlayReady to access their content. If you decline an
upgrade, you will not be able to access content that
requires the upgrade.
Wi-Fi Alliance
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi
CERTIFIED Miracast™, Miracast™ are trademarks of
the Wi-Fi Alliance.
MHEG software
The copyright in MHEG software ("the Software")
comprised in this television ("this product") and
included to enable you to use interactive television
features is owned by S&T CLIENT SYSTEMS LIMITED
("the Owner"). You are permitted to use the Software
only in conjunction with this product.
75
Kensington
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with issued
registrations and pending applications in other
countries throughout the world.
Other trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
76
Index
A
Activity style 37
Amplifier, audio system 38
Antenna connection 4
Antenna connection, tips 5
App, rental videos 58
Apps, feedback 57
Apps, lock 57
Apps, open 57
Apps, recommended 57
Apps, search 57
Audio commentary 39
Audio description 39
Audio language 26
Audio Out - Optical 6
Audio to video sync 9
Auto subtitle shift 7
Auto volume levelling 38
Automatic channel update 27
B
Backlight contrast 34
Bass 37
Blu-ray Disc, connect 10
Brightness 35
Brightness, word mark 16
C
CAM - Conditional Access Module 7
CAM, install 7
Channel list copy 28
Channel list copy 28
Channel list, new 28
Channel lock 23
Channel update message 27
Channel, favourite 22
Channel, options 24
Channel, problems 69
Channel, status 24
Channel, switch 22
Channels, rename 23
Channels, update 27
Child lock code 23
CI+ 7
Clear sound 38
Clock 43
Colour 34
Colour, Colour enhancement 35
Colour, Colour temperature 35
Common Interface slot 7
Consumer Care 70
Contact Philips 70
Contrast 34
Contrast, Brightness 35
Contrast, Contrast modes 35
Contrast, Dynamic contrast 35
Contrast, Gamma 36
Contrast, Light sensor 36
Contrast, Video contrast 36
D
Digital Text 24
Disposal of TV or batteries 59
DVB (Digital Video Broadcast) 29
DVB, settings 30
DVI, connect 5
E
EasyLink 6
EasyLink, connection 5
EasyLink, settings 7
Eco settings 59
End of use 59
ESD 61
European Energy Label 59
F
Facebook 57
Favourite channel list 22
Frequency scan 30
Frequency step size 30
G
Game console, connect 10
Game or computer 37
Gamma 36
H
HbbTV 27
HDCP, copy protection 5
HDMI ARC 5
HDMI CEC 6
HDMI connection, tips 5
Headphones 12
Headphones volume 38
Hearing impaired 39
Home Theatre System, connect 8
Home Theatre System, multichannel 9
Home Theatre System, problems 10
Home Theatre System, volume leveling 9
I
Incredible surround 38
Interactive TV, about 26
Interactive TV, what you need 27
Internet memory, clear 46
I
iTV 26
L
Language, audio 26
Language, menus and messages 26
Language, original 26
Light sensor 36
Location 37
M
Manual installation 31
Media servers, supported 61
Menu language 26
Miracast, block/unblock 49
Miracast, share a screen 49
Miracast, stop sharing 49
Miracast™ 48
MPEG artefact reduction 36
77
Music, playback 47
N
Network frequency 30
Network frequency mode 30
Network router 44
Network, DHCP 44
Network, password 44
Network, problems 45
Network, settings 46
Network, Static IP 44
Network, wired 45
Network, wireless 44
New channels 28
Noise reduction 36
O
On and Off 16
Online support 70
Online TV 58
Open source software 62
Options, on a channel 24
Original language 26
P
Parental rating 23
Photo camera, connect 11
Photos, slideshow 47
Photos, videos and music 47
Picture style 34
Picture, backlight contrast 34
Picture, colour 34
Picture, problems 69
Picture, sharpness 34
Pixel Plus link 7
Playback formats 61
Power connection 3
Power consumption, check 59
Predefined symbol rates 30
Q
Quick picture settings 33
R
Radio channel 22
Reception quality 30
Recording, Skype calls 54
Red button 26
Rename channels 23
Rental videos 58
Repair 70
S
Safety instructions 72
SCART connection, tips 6
Screen care 73
Screen off 47
Screen off 59
Sharpness 34
Sharpness, MPEG artefact reduction 36
Sharpness, Noise reduction 36
Sharpness, super resolution 36
Shop location 37
Skype, auto sign in 55
Skype, camera zoom, pan and tilt 56
Skype, contacts 52
Skype, during recording 54
Skype, install camera 50
Skype, menu 51
Skype, Microsoft account 51
Skype, missed calls 54
Skype, new account 50
Skype, receiving a call 54
Skype, rental movies and Pause TV 54
Skype, sign in 50
Skype, video call 53
Skype, what you need 50
Skype™, what 50
Sleep timer 43
Smart TV, about 57
Smart TV, internet 57
Smart TV, open 57
Smart TV, overview 57
Smart TV, start page 57
Sound style 37
Sound, problems 70
Standby 16
Subtitles 25
Support, online 70
Surround mode 38
Switch off timer 43
Switching on 16
Symbol rate 30
Symbol rate mode 30
Synchronise audio and video 9
T
Teletext 24
Text 24
Treble 37
TV clock 43
TV guide 41
TV guide, clock 43
TV network name 46
TV on Demand 58
TV placement 3
TV placement 39
TV speakers 38
Twitter 57
U
Universal access 39
Universal access, audio effect 40
Universal access, hearing impaired 39
Universal access, mixed volume 40
Universal access, Speakers / Headphones 39
Universal access, speech 40
USB flash drive, connect 11
V
Video selection 24
Videos, playback 48
Viewing distance 3
Visually impaired 39
W
Watch TV 22
Wi-Fi 44
Wi-Fi Certified Miracast™ 48
Wired network 45
Wireless installation 44
Word mark, brightness 16
World Wide Web 57
WPS - PIN code 44
WPS - Wi-Fi Protected Setup 44
78
Contact information
Belgium/België/Belgique
02 7007360
Bosna/Hecegovina
+38733 5356 33
Albania
+355 4 365 314
Armenia
+374 1 522 278
Belarus/Беларусь
+375 2 841 118 (ASTline)
+375 1 721 056 78 (CTI)
Bulgaria/България
0 0800 1154426
Austria/Österreich
0150 2842133
Croatia/Hrvatska
0800 222 782
Czech Republic/Česká
republika
800 142100
Denmark/Danmark
352 587 61
Estonia/Eesti Vabariik
800 0044 307
Finland/Suomi
09 229 019 08
France
01 57324070
Georgia
+995 32 99 70 25
Germany
0696 640 4383
Greece/Ελλάδα
0 0800 3122 1223
Hungary/Magyarország
068 001 85 44
Republic of Ireland/Poblacht
nah Éireann
01 601 11 161
Northern Ireland/Tuaisceart
Éireann
01 601 11 161
Italy/Italia
02 4528 7030
Kazakhstan/Қазақстан
+727 246 44 83 90
Latvia/Latvija
800 03 448
Lithuania/Lietuva
880 030 049
Luxembourg/Luxemburg
026 843 000
Macedoni
+389 2 109 857
Netherlands/Nederlands
010 4289533
Norway/Norge
22 70 82 50
Poland/Polska
022 349 1505
Portugal
0800 780 902
Romania/România
03 727 66905
Russia/Россия
(495) 961-11-11
8-800-200 08 80
Serbia/Srbija
00381 114 440 841
00381 113 442 114
Slovakia/Slovensko
0800 0045 51
Slovenia
0800 80 255
Spain/España
915 909 335
Sweden/Sverige
08 6320 016
Switzerland/Schweiz/Suisse
0223 1021 16
Turkey/Türkiye
444 8 445
Ukraine/Україна
+380 44 392 8698
+38 056 232 00 45 (Comel)
+38 044 245 73 31 (Topaz)
United Kingdom
020 7949 0069
Middle East and Africa
Bahrain 97317700424
Iran 98218756940
Kuwait 4565/9654842988
Lebanon 9611684900
Morocco 022302992
Qatar 9744422221
Saudi Arabia 96626292929
Syria 96321234994
United Arab Emirates
Al Gandi 97143376600
Gulf 97125553754
Trademarks are the property of Koninklijke Philips N.V. or their respective owners.
2015 © TP Vision Europe B.V. All rights reserved.
www.philips.com
This information is correct at the time of print. For updated information, see www.philips.com/support.