Table of Contents
- 1 Get started
- 2 Use your TV
- 3 Use more of your TV
- 4 Set up your TV
- 5 Connect your TV
- 6 Troubleshooting
- 7 Product specifications
- 8 Index
Philips 37PFL7666T/12 User Manual
Displayed below is the user manual for 37PFL7666T/12 by Philips which is a product in the TVs category. This manual has pages.
Related Manuals
EN User Manual
Register your product and get support at
www.philips.com/welcome
55PFL76x6H
47PFL76x6H
42PFL76x6H
37PFL76x6H
32PFL76x6H
55PFL76x6K
47PFL76x6K
42PFL76x6K
37PFL76x6K
32PFL76x6K
55PFL76x6T
47PFL76x6T
42PFL76x6T
37PFL76x6T
32PFL76x6T
EN 2
1 Get started 3
TV tour 3
Important 6
Environmental efforts 8
Position the TV 9
Help and support 10
2 Use your TV 12
Controls 12
Watch TV 14
Watch a connected device 17
Watch 3D 18
Ambilight 19
Browse PC through DLNA 21
Net TV and online video 22
Games 25
3 Use more of your TV 27
Pause TV 27
Record TV shows 28
Enjoy HbbTV 31
View Teletext 32
Set locks and timers 33
View subtitles 34
View Scenea 34
Use EasyLink 35
4 Set up your TV 38
Settings assistant 38
Picture and sound 38
Channels 39
Menu language 42
Set universal access 42
Other settings 43
Update software 43
Reinstall the TV 45
5 Connect your TV 46
About cables 46
Connect devices 47
Connect more devices 53
Computers and the Internet 55
Common interface 60
6 Troubleshooting 62
Contact Philips 62
General TV 62
TV channel 62
Picture 63
Sound 63
HDMI 64
USB 64
Network 64
7 Product specifications 65
Power and reception 65
Display and sound 65
Display resolutions 65
Multimedia 66
Connectivity 66
Dimensions 67
Help version 68
8 Index 69
Contents
EN 3
1 Get started
TV tour
Remote control
To adjust the volume.
To switch TV channels.
To open or close the Home menu.
In the Home menu, access connected
devices, picture and sound settings, and
other useful features.
To open or close the Source menu.
In the Source menu, access connected
devices.
To open or close the Find menu.
In the Find menu, access the channel list.
To open or close the Adjust menu.
In the Adjust menu, access a range of
frequently used settings.
To open or close the Text menu.
In the Text menu, access teletext for news
and information.
To open or close the Options menu.
Options menus offer convenient settings for
TV channels or programmes.
To return to the previous menu page or to
exit from a TV function.
EN 4
Press and hold to return to watching TV.
To select a red menu option, access digital
Interactive TV services*, or watch TV
demonstration clips.
*Available on certain models only.
To select a green menu option or to access
energy efficient settings.
To select a yellow menu option or to access
the electronic user manual.
Read more about the remote control in Use
your TV > Controls > Remote control
(Page 12).
Alternatively, look at the index in Search
for...
Press to select the next TV tour.
Connect devices
For the best picture and sound quality,
connect a DVD, Blu-ray disc player, or game
console through HDMI (TM).
To watch a non EasyLink compliant device,
add it to the Home menu.
1. Press > [Add your devices].
2. Follow the onscreen instructions.
Note: If you are prompted to select the TV
connection, select the connector that this
device uses. See Connect your TV >
Connect devices (Page 47) for information
on connection.
If an EasyLink or HDMI-Consumer Electronic
Control (HDMI-CEC) compliant device is
connected to the TV, it is automatically
added to the Home menu when both
devices are switched on.
To watch a connected device
1. Press .
2. Select the newly added device icon.
EN 5
English
You can learn more on device connections in Connect your TV > Connect devices.
High Definition TV
For high-definition (HD) picture quality,
watch HD programmes.
On standard-definition (SD) programmes,
the picture quality is standard.
You can watch HD video content in these
ways and more:
a Blu-ray disc player, connected with an
HDMI cable, playing a Blu-ray disc
an upscaling DVD player, connected
with an HDMI cable, playing a DVD
disc
an over-the-air HD broadcaster (DVB-
T MPEG4)
a digital HD receiver, connected with
an HDMI cable, playing HD content
from a cable or satellite operator
an HD channel on your DVB-C
network
an HD game console (for example, X-
Box 360 or PlayStation 3), connected
with an HDMI cable, playing an HD
game
HD video clip
To experience the stunning sharpness and
picture quality of HD TV, watch the HD
video clip from the Home menu.
Press > [Setup] > [Watch demos].
Watch Demo is on the second page of the
setup menu.
For more information about the availability
of HD channels in your country, contact
your Philips dealer or visit
www.philips.com/support.
Ambilight
*Available on certain models only.
Ambilight gives a more relaxed viewing
experience. It automatically adjusts the
colour and brightness of the light to match
the TV picture.
Read more in Use your TV > Ambilight
(Page 19).
Network
Connect your TV to your home network to
play music, photos, and videos from a
computer or other media server on the
same network.
Read more in Connect your TV >
Computers and the Internet (Page 55).
Net TV
If your home network is connected to the
Internet, you can connect your TV to Net
TV. Net TV offers movies, pictures, music
and much more.
Read more in Use your TV > Browse Net
TV.
EN 6
3D TV
This is a 3D TV. Connect your TV to a 3D
Blu-ray disc player or tune in to a TV
channel that broadcasts programmes in 3D.
Read more in Use your TV > Watch 3D
(Page 18).
Important
Safety
Read and understand all instructions before
you use your TV. If damage is caused by
failure to follow instructions, the warranty
does not apply.
Risk of electric shock or fire!
Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
When the TV is swivelled, ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
To disconnect the TV from the mains
power, the power plug of the TV must
be disconnected. When disconnecting
the power, always pull the power plug,
never the cord. Ensure that you have
full access to the power plug, power
cord and outlet socket at all times.
Never insert objects into the ventilation
slots or other openings on the TV.
Never place the TV, remote control or
batteries near naked flames or other
heat sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
Risk of short circuit or fire!
Never expose the remote control or
batteries to rain, water or excessive
heat.
Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
fire.
Risk of injury or damage to the TV!
Two people are required to lift and
carry a TV that weighs more than 25kg
or 55lbs.
When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat,
level surface that can support the
combined weight of the TV and the
stand.
When wall mounting the TV, use only a
wall mount that can support the weight
of the TV. Secure the wall mount to a
wall that can support the combined
weight of the TV and wall mount. TP
Vision Netherlands B.V. bears no
responsibility for improper wall
mounting that result in accident, injury
or damage.
If you need to store the TV,
disassemble the stand from the TV.
Never lay the TV on its back with the
stand installed.
EN 7
English
Before you connect the TV to the
power outlet, ensure that the power
voltage matches the value printed on
the back of the TV. Never connect the
TV to the power outlet if the voltage is
different.
Parts of this product may be made of
glass. Handle with care to avoid injury
and damage.
Risk of injury to children!
Follow these precautions to prevent the TV
from toppling over and causing injury to
children:
Never place the TV on a surface
covered by a cloth or other material
that can be pulled away.
Ensure that no part of the TV hangs
over the edge of the surface.
Never place the TV on tall furniture,
such as a bookcase, without anchoring
both the furniture and TV to the wall
or a suitable support.
Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
The product/remote control may
contain a coin-type battery, which can
be swallowed. Keep the battery out of
reach of children at all times!
Risk of overheating!
Never install the TV in a confined
space. Always leave a space of at least 4
inches or 10 cm around the TV for
ventilation. Ensure that curtains or
other objects never cover the
ventilation slots on the TV.
Risk of injury, fire or power cord damage!
Never place the TV or any objects on
the power cord.
Disconnect the TV from the socket and
aerial before lightning storms. During
lightning storms, never touch any part
of the TV, power cord or aerial cable.
Risk of hearing damage!
Avoid using earphones or headphones
at high volumes or for prolonged
periods of time.
Low temperatures
If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting
the TV to the power outlet.
Screen care
Risk of damage to the TV screen!
Never touch, push, rub or strike the
screen with any object.
Unplug the TV before cleaning.
Clean the TV and frame with a soft
damp cloth. Never use substances such
as alcohol, chemicals or household
cleaners on the TV.
To avoid deformations and colour
fading, wipe off water drops as soon as
possible.
Avoid stationary images as much as
possible. Stationary images are images
that remain onscreen for extended
periods of time. Stationary images
include onscreen menus, black bars,
time displays, etc. If you must use
stationary images, reduce screen
contrast and brightness to avoid screen
damage.
3D, health warning
If you or your family have a history of
epilepsy or photosensitive seizures,
consult a medical professional before
exposing yourself to flashing light
sources, rapid image sequences or 3D
viewing.
To avoid discomfort such as dizziness,
headache or disorientation, we
recommend not watching 3D for
extended periods of time. If you
experience any discomfort, stop
watching 3D and do not immediately
engage in any potentially hazardous
activity (for example driving a car) until
your symptoms have disappeared. If
symptoms persist, do not resume
watching 3D without consulting a
medical professional first.
EN 8
Parents should monitor their children
during 3D viewing and ensure they do
not experience any discomfort as
mentioned above. Watching 3D is not
recommended for children under 6
years of age as their visual system is not
fully developed yet.
Do not use the 3D glasses for any
purpose other than watching 3D TV.
Care of 3D glasses
3D glasses are supplied with this TV. Follow
these care instructions for your glasses:
Use a clean soft cloth (microfibre or
cotton flannel) to clean the lenses to
avoid scratching them. Never spray
cleaner directly on the 3D glasses. You
can use pre-moistened cleaning cloths
from most well-known lens
manufacturers of sunglasses.
Do not expose the 3D glasses to direct
sunlight, heat, fire or water. This may
result in a product malfunction or fire.
Do not drop, bend or apply force to
the lenses of the 3D glasses.
Do not use cleaning chemicals
containing alcohol, solvent, surfactant,
or wax, benzene, thinner, mosquito
repellent or lubricant. Using these
chemicals can cause discolouration or
cracks.
CHOKING HAZARD - Keep the
product out of reach of children under
three years of age at all times! The
product contains small parts which can
be swallowed.
Environmental efforts
Energy efficiency
Philips continuously focuses on lowering the
environmental impact of our innovative
consumer products. We aim our efforts
towards environmental improvements during
manufacturing, reduction of harmful
substances, energy-efficient use, end-of-life
instructions and product recycling.
To access energy efficient settings:
While you watch TV, press the green button
on the remote control.
These energy-efficient settings include:
Energy saving picture settings: You can
apply a combination of energy saving
picture settings. While you watch TV,
press the green button and select
[Energy saving].
Power switch: You can completely cut
off power to the TV with the power
switch. It is located at the base of the
set.
Screen off: If you only want to listen to
audio from the TV, you can turn off the
TV display. Other functions continue to
operate normally.
Light sensor: The built-in ambient light
sensor lowers the brightness of the TV
screen when the surrounding light
darkens.
Low standby power: The advanced
power circuitry brings down the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.
Power management: The advanced
power management of this TV ensures
the most efficient use of its energy.
To view how your personalised TV
settings affect the TV's relative power
consumption, press and select
[Setup] > [Watch demos] > [Active
Control].
End of use
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
EN 9
English
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European
Directive 2002/96/EC. Please inform yourself
about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and
do not dispose of your old products with
your normal household waste. Correct
disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal
household waste. Please inform yourself
about the local rules on separate collection
of batteries because correct disposal helps to
prevent negative consequences for the
environment and human health.
Position the TV
Placement
Before you position the TV, read all
safety precautions. See Get Started >
Important > Safety (Page 6).
Position the TV where light does not
shine directly on the screen.
The ideal distance from which to watch
TV is three times its diagonal screen
size. For example, if the diagonal screen
size of the TV is 116cm / 46", the ideal
viewing distance is ~3.5m / ~138" from
the front of the screen.
While seated, your eyes should be level
with the centre of the screen.
Stand mount or wall mount
To apply the best settings for your TV, select
wall mount or stand mount.
1. In the [Preferences] menu, select [TV
placement].
2. Select [On a TV stand] or [Wall
mounted], then press OK.
Wall mount
You can also wall mount your TV on a
compatible TV mount (not supplied). Check
your TV screen size and match it against the
list for the type of wall mount to purchase:
81 cm / 32 inches : 200mm x 200mm, M6
94 cm / 37 inches: 200mm x 200mm, M6
107 cm / 42 inches: 400mm x 400mm, M6
119 cm / 47 inches: 400mm x 400mm, M6
140 cm / 55 inches: 400mm x 400mm, M8
Warning: Follow all instructions provided
with the TV mount. TP Vision Netherlands
B.V. bears no responsibility for improper
TV mounting that results in accident, injury
or damage.
To prevent damage to cables and
connectors, leave a gap of at least 5.5 cm /
2.2 inches from the back of the TV.
For 32-inch to 42-inch TVs:
Before you wall mount the TV, find the
correct length of screw.
EN 10
To find the length of screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
For 47 inch to 55 inch TVs:
Before you wall mount the TV, find the
correct length of screw.
To find the length of screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
Location
A range of TV settings are applied to suit the
location of the TV.
Shop or home mode
Set the TV location to Home mode to
access all TV settings. In Shop mode, you can
access only a few settings.
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Location] > [Home] or [Shop],
then press OK.
4. Restart the TV.
Lock the TV
Your TV is equipped with a Kensington
security slot at the base of the TV. Purchase
a Kensington anti-theft lock (not supplied) to
secure the TV.
Help and support
Use Help
You can access onscreen [Help] from the
Home menu by pressing the Yellow button.
You can also switch between the [Help]
menu and the TV menu by pressing the
Yellow button.
Online support
If you can't find what you need in the
onscreen [Help], consult our online support
at www.philips.com/support.
Follow the website instructions to select
your language, then enter your product
model number.
At our support website, you can also:
find answers to frequently asked
questions
download a printable PDF version of
this user manual to read
email us a specific question
chat online with one of our support
personnel (available in certain countries
only)
EN 11
English
Contact Philips
If you like, you can contact Philips Consumer
Care in your country for support. You can
find the contact number in the leaflet
accompanying the TV.
Before you contact Philips, note down your
TV model and serial number. You can find
this information on the back of your TV or
on its packaging.
EN 12
2 Use your TV
Controls
TV controls
1. +/-: Increase or decrease volume.
2. AMBILIGHT: Switch Ambilight on or off.
Ambilight is available on certain models only.
3. (Home): Access the Home menu. Press
again to launch an activity in the Home
menu. Confirm an entry or selection.
4. CH +/-: Switch to the next or previous
channel.
5.Power: Switch the TV on or off.
Indicators
1. Ambient sensor / remote control sensor
Ambient sensor is available on certain
models only.
Remote control
1. (Standby): Switch the TV on or to
standby.
2. Play buttons: Control video or music play.
3. Colour buttons: Select tasks or options.
The buttons function according to the
services offered by the service provider.
EN 13
English
4. (Home): Access the Home menu.
5. (Navigation buttons): Navigate
through menus and select items.
6. CH - / CH + (Previous/Next): Switch
channels, navigate through menu pages,
tracks, albums or folders.
7. OK: Confirm an entry or selection.
8. (Back): Return to the previous menu
page or exit from a TV function.
9. FIND: Access the menu to select TV
channel list.
10. ADJUST: Access the menu to adjust
settings.
11. SOURCE: Select connected devices.
12. OPTIONS: Access options for the
current activity or selection.
13. +/- (Volume): Adjust volume.
14. (Mute): Mute or restore audio.
15.0-9(Numeric buttons): Select channels.
16.TEXT/INFO: Enable or disable teletext.
Press and hold to view more information on
the current activity.
17.SUBTITLE: Enable or disable subtitles.
Batteries
Warning: Risk of swallowing batteries!
The product/remote control may contain a
coin-type battery, which can be swallowed.
Keep the battery out of reach of children at
all times!
Caution: The battery contains perchlorate
material, handle it with care. For information,
see
www.dtsc.ca.gov/hazardouswaste/perchlorat
e.
If your remote control signal is weak, replace
the batteries:
1. Open the battery cover.
2. Remove the old batteries from the battery
compartment, and replace them with fresh
batteries.
Make sure that the ends of the batteries line
up correctly with the +/- markings in the
battery compartment.
Notes:
Dispose of batteries according to
environmental directives. Read Get started
> Environmental efforts > End of use (Page
8).
Remove batteries from the remote control if
you will not use it for an extended period of
time.
The type of battery varies according to RC
model:
For remote control with AAA batteries (end
to end):
EN 14
For remote control with AAA batteries (side
by side):
For remote control with CR2032 (3V)
batteries:
EasyLink controls
Note: EasyLink controls are available when
the connected device is HDMI-CEC
compliant.
EasyLink allows you to control your TV and
other HDMI-CEC devices with one remote
control.
Access EasyLink controls
1. While you view content from a connected
HDMI-CEC device, press OPTIONS.
2. Select [Show device keys], then press
OK.
3. Select the EasyLink control button, then
press OK.
Read more on EasyLink in Use more of
your TV > Use EasyLink (Page 35).
Smartphone control
Use your smartphone as a secondary
remote, and even as a keyboard. You can
also view a slideshow of the images in your
smartphone on the TV. To download the
application 'Philips My Remote', visit the
Apple Apps store or the Android Market.
Follow the instructions provided at the
applications store.
Ensure that your TV and smartphone are
connected to the same local network. Read
more about network connections in
Connect your TV > Computers and the
Internet (Page 55).
Watch TV
Switch TV on or off
Switch the TV on
Press the power switch at the base of
the TV to the ON position.
EN 15
English
If the TV is in standby, press on the
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press CH +/- on the front of the TV.
Though your TV consumes very little energy
in standby, it does use some energy. If you
are not going to use the TV for an extended
period of time, switch it off to cut off the
power.
Switch TV to standby
Press on the remote control. The remote
control sensor on the TV switches to red.
Switch off the TV
Press the power switch at the base of the
TV to the OFF position.
The TV no longer consumes energy.
Automatic switch off
This TV is designed with energy efficiency
settings. If there is no user interaction (such
as pressing a remote control button or a
control on the front panel) for four hours,
the TV will automatically switch to standby.
To disable automatic switch off,
While you watch TV, press the green button
on the remote control. Select [Auto switch
off] and press OK. An on screen message
confirms that automatic switch off is
disabled.
Adjust TV volume
Increase or decrease the TV volume
Press +/- on the remote control.
Press +/- on the front of the TV.
Mute or unmute the TV volume
Press to mute the TV, or
Press again to restore the volume.
Adjust headphone volume
1. Press > [Setup] > [TV settings] >
[Sound].
2. Select [Headphones volume], then press
OK.
Switch TV channels
Press on the remote control.
Press CH +/- on the TV.
Press the Numeric buttons to enter a
channel number.
EN 16
Manage channel lists
You can view all channels, or only a list of
your favourite channels. Press FIND to
access the channel list.
Create a list of your favourite channels
1. Press FIND.
2. Select the channel to mark as a favourite
and press OPTIONS.
3. Select [Mark as favourite] and press OK.
The selected channel is marked with a star.
To deselect a channel, select [Unmark as
favourite], and then press OK.
Select a channels list
1. In the channel list, press OPTIONS.
2. Select [Select list] > [Favourites] to
display channels in the favourite list; or [All]
to display all channels.
3. Press OK to confirm.
View only analogue or digital TV channels
You can filter the channel list to access only
analogue or digital channels.
1. In the channel list, press OPTIONS.
2. Select [Select list] > [Analogue] or
[Digital], then press OK.
Depending on your selection, only analogue
or digital channels are available.
Listen to digital radio
If digital radio channels are available, they are
installed automatically when you install the
TV channels.
1. While you watch TV, press FIND. The
channel list is displayed.
2. Press OPTIONS.
3. Select [Select list] > [Radio], then press
OK.
4. Select a radio channel, then press OK.
View programme guide
The programme guide displays information
about digital TV channels, for example:
Channel schedules
Synopsis of programmes
Note: TV programme guides are available in
certain countries only.
Set programme guide
Before you use the programme guide, check
the following settings:
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Programme guide].
3. Select [From the broadcaster] or [From
network], then press OK.
Access the TV programme guide
1. Press .
2. Select [Programme guide], then press
OK.
Note: If you are viewing the programme
guide for the first time, follow the onscreen
instructions when asked to update the guide.
Use TV programme guide options
You can customise the displayed information
to:
Remind you when programmes start
Display only preferred channels
1. In the programme guide, press
OPTIONS.
2. Select one of these settings, then press
OK:
[Set reminder]: Set programme
reminders.
[Clear reminder]: Clear programme
reminders.
[Change day]: Select the day to display.
[More info]: Display programme
information.
[Search by genre]: Search TV
programmes by genre.
[Scheduled reminders]: List
programme reminders.
[Update Programme guide]: Update
the latest programme information.
Use smart picture settings
Select your preferred picture setting.
1. While you watch TV, press ADJUST.
2. Select [Smart picture].
3. Select one of the following settings, then
press OK:
[Personal]: Apply your personalised
picture settings.
EN 17
English
[Vivid]: Rich and dynamic settings, ideal
for daytime viewing.
[Natural]: Natural picture settings.
[Cinema]: Ideal settings for movies.
[Game]: Ideal settings for games.
[Energy saving]: Settings that conserve
the most energy.
[Standard]: Default settings that suit
most environments and types of video.
[Photo]: Ideal settings for photos.
[Custom]: Customise and store your
own picture settings.
Use smart sound settings
Select your preferred sound setting.
1. While you watch TV, press ADJUST.
2. Select [Smart sound].
3. Select one of the following settings, then
press OK:
[Personal]: Apply your preferred setting
in the sound menu.
[Standard]: Settings that suit most
environments and types of audio.
[News]: Ideal settings for spoken audio,
such as the news.
[Movie]: Ideal settings for movies.
[Game]: Ideal settings for games.
[Drama]: Ideal settings for drama
programs.
[Sports]: Ideal settings for sports.
Change picture format
Change the picture format to suit your
preference.
1. Press ADJUST.
2. Select [Picture format], then press OK.
3. Select a picture format, then press OK to
confirm.
The available picture formats depend on the
video source:
[Auto fill]: Adjust the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.
[Auto zoom]: Enlarge the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.
[Super zoom]: Remove the black bars
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.
[Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or
PC.
[Wide screen]: Stretch 4:3 format to
16:9.
[Unscaled]: Provide maximum detail for
PC. Only available when PC mode is
enabled in the picture menu.
Watch a connected device
Add new device
Notes:
Before you watch a connected device,
you must add its icon to the Home
menu. See Connect your TV >
Connect device (Page 47).
If you connect an HDMI-CEC
compliant device to the TV through an
HDMI connector and switch it on, the
device is automatically added to the
Home menu.
1. Connect and switch on the device.
2. Press .
3. Select [Add your devices], then press
OK.
4. Follow the onscreen instructions.
Select your device.
Select the connector.
Note: If you are prompted to select the TV
connection, select the connector that this
device uses.
Select a source
From Home menu
After you have added the new device to the
Home menu, select the new device icon to
view its contents.
1. Press .
2. Select the device icon from the Home
menu.
3. Press OK to confirm.
From Source menu
EN 18
You can also press SOURCE to display a
list of connector names. Select the
connector that connects the device to the
TV.
1. Press SOURCE.
2. Press the Navigation buttons to select a
connector in the list.
3. Press OK to confirm.
Play from USB
If you have photos, videos or music files on a
USB storage device, you can play the files on
TV.
Caution: TP Vision is not responsible if the
USB storage device is not supported, nor is
it responsible for damage or loss of data in
the device.
Do not overload the USB port. If you
connect an HDD device that consumes
more than 500mA power, make sure that it
is connected to its own external power
supply.
Access the USB content browser as follows:
While you watch TV, connect the USB
device to the USB connector on the
TV.
Press , select [Browse USB], then
press OK.
Watch video
Press the Navigation buttons to select a
video file, then press OK.
Press or to search forward or
backward within a video.
Press and hold to exit the content
browser.
While you play video, press OPTIONS
to access the following video options:
[Stop]: Stop playback.
[Repeat]: Repeat a video.
[Shuffle on] / [Shuffle off]: Enable or
disable random play of videos.
View picture
Press the Navigation buttons to select a
picture, then press OK.
To pause or stop play, press OK.
To skip to the previous or next file,
press or .
Press and hold to exit content
browser.
Press OPTIONS to access or exit the
following picture options:
[Show info]: Display the file
information.
[Stop]: Stop slideshow.
[Rotate]: Rotate the file.
[Repeat]: Repeat the slideshow.
[Play once]: Play the file once.
[Shuffle off] / [Shuffle on]: Enable or
disable random display of pictures in
the slideshow.
[Slideshow speed]: Set the display time
for each picture in the slideshow.
[Slideshow transition]: Set the
transition from one picture to the next.
[Set as Scenea]: Set the selected
picture as wallpaper on TV.
Listen to music
Press the Navigation buttons to select a
music track, then press OK.
Press / to search forward or
backward within a track.
Press and hold to exit content
browser.
Press OPTIONS to access or exit the
following music options:
[Stop]: Stop audio play.
[Repeat]: Repeat a track or an album.
[Play once]: Play the track once.
[Shuffle on] / [Shuffle off]: Enable or
disable random play of tracks.
Watch 3D
What you need
Your TV is a 3D TV. To watch 3D, you can
use the Philips Easy 3D glasses, included with
this TV. You can purchase additional Philips
3D glasses PTA416 or PT426 (sold
separately) from your local dealer.
EN 19
English
Before you watch 3D, read the health
warning information in Get started >
Important > 3D Health warning (Page 7).
Note: Passive 3D glasses from other
manufacturers may not work or offer less
optimal 3D viewing.
Start 3D
To enjoy a 3D movie or programme, insert a
3D movie disc into the 3D Blu-ray disc
player connected to the HDMI connector
on this TV or tune to a TV channel that
broadcasts 3D content.
Press and select the 3D Blu-ray disc player
or select [Watch TV] and tune to the TV
channel.
The TV will prompt a message when 3D is
available. To start watching 3D, select [Start
3D] and press OK. Put on your 3D glasses.
If you have tuned to a 3D TV channel and
do not see the prompt to switch to 3D, you
have to select the 3D format manually. To
switch on 3D format manually, press
ADJUST. Select [2D/3D] > [3D], then press
OK.
Select a suitable 3D format
If the TV shows a double picture but the 3D
effect is not seen with the 3D glasses, you
will need to select a suitable 3D viewing
format.
To set the TV in 3D, press ADJUST.
Select [3D format] and press OK, then
select [3D - Side by side] or [3D - Top /
bottom] according to the double picture
positions.
Stop 3D
If you switch to another channel or a
connected device, the TV switches back to
2D.
To stop watching 3D during a 3D
programme, press ADJUST. Select
[2D/3D] > [2D], then press OK. This
forced 2D picture shows only the 3D-left
picture.
Note: The 2D/3D menu is only available
when the TV receives 3D content from the
input signal, or when [3D format] has been
set to [3D - Side by side] or [3D - Top /
bottom].
Optimal 3D viewing
For an optimal 3D viewing experience, we
recommend that you:
sit at a distance that is at least three
times the width (W) of the TV screen.
Do not sit more than six metres away.
view the centre of the TV screen at
your eye level.
watch the TV away from direct sunlight
as it may interfere with the 3D
experience.
Ambilight
What you can do
*Available on certain models only.
Ambilight gives a more relaxed viewing
experience. It automatically adjusts the
colour and brightness of the light to match
the TV picture.
EN 20
What you need
For the best Ambilight effect, position
the TV 25cm away from the wall.
Keep the remote control away from
the TV, as it can interfere with the
infrared signals.
Dim the light in the room.
Switch on
1. Press ADJUST.
2. Select [Ambilight], then press OK.
3. To switch Ambilight on or off, select [On]
or [Off].
You can also press AMBILIGHT on the TV
to switch Ambilight on or off.
Change settings
In the Ambilight menu, you can access more
Ambilight settings.
1. While you watch TV, press > [Setup].
2. Select [TV settings] > [Ambilight].
3. Select a setting to adjust:
[Dynamic]: Adjust Ambilight between
relaxed and dynamic levels. Available
only if Ambilight [Colour] is set to
[Dynamic].
[Brightness]: Adjust the brightness of
Ambilight.
[Colour]: Select a predefined colour.
[Custom colour]: Set your own
Ambilight colour. To access this option,
set [Ambilight] > [Colour] >
[Custom].
[Separation]: Adjust the difference in
colour levels on each side of the TV.
Turn off this feature for a dynamic and
uniform Ambilight colour.
[TV switch off]: Select how Ambilight
switches off when the TV is switched
off.
[Lounge light mood]: Select a lounge
light mode. The lounge light comes on
when the TV is in standby.
[Scenea lounge light]: Switch Scenea
lounge light on or off when Scenea is
enabled.
[Wall colour]: Select the colour of the
wall behind the TV. Ambilight corrects
its colours to suit the colour of the wall.
Use lounge light
When the TV is in standby, press Ambilight
on the front of the TV to create a lounge
light effect in your room.
Note: It may take more than 5 seconds for
the lounge light to switch on.
To select another lounge light colour, see
Use your TV > Ambilight > Change
settings.
EN 21
English
Browse PC through DLNA
What you can do
If you have photos, videos or music files
stored on a computer connected through a
home network, you can play the files on
your TV.
What you need
A wired or wireless home network,
connected with a Universal Plug and
Play (uPnP) router.
A Philips wireless USB adapter or a
LAN cable that connects your TV to
your home network.
A media server such as:
PC running Windows Media Player 11
or higher; or
Mac running Twonky Media Server.
Make sure that your computer firewall
allows you to run the media server
software program.
You will also need to set up the network
connection:
Connect your TV and the computer to
the same home network. See Connect
your TV > Computers and the
Internet (Page 55).
Switch on your computer and the
router.
Proceed to set up a media sharing server
with Windows Media Player 11 or higher, or
Twonky Media Server.
Note: For help to use other media servers,
such as TVersity, see the web site of the
media server.
If the apparatus does not return to DLNA
mode due to external electrical disturbances
(e.g. electrostatic discharge), user
intervention is required.
Enable sharing on Windows Media
Player 11
1. Start Windows Media Player on your
computer.
2. Select Library > Media Sharing.
The first time you select Media Sharing,
a pop-up screen appears. Tick the
Share my media box and click OK.
A device marked as Unknown Device
appears in the Media Sharing screen.
If the unknown device does not appear
after a minute or so, make sure that
your PC firewall is not blocking the
connection.
3. From the Media Sharing screen, select the
unknown device and click Allow.
A green tick appears next to the device.
By default, Windows Media Player
shares files from these folders: My
Music, My Pictures, and My Videos.
4. If your files are in other folders, select
Library > Add to Library, and then follow
the onscreen instructions to add the folders.
If necessary, select Advanced options
to display a list of monitored folders.
5. Select Library > Apply Media Information
Changes to activate the changes.
Enable sharing on Windows Media
Player 12
1. Start Windows Media Player on your
computer.
2. In Windows Media Player, select the
Stream tab, and then select Turn on media
streaming.
The Media streaming options screen
appears.
3. Click Turn on media streaming.
Return to the Windows Media Player screen.
4. Click Stream > More streaming options.
The Media streaming options screen
appears.
A media program appears in the local
network screen. If the media
programme does not appear, make
sure that your PC firewall is not
blocking the connection.
5. Select the media programme and click
Allowed.
A green arrow appears next to the
media programme.
EN 22
By default, Windows Media Player
shares files from these folders: My
Music, My Pictures, and My Videos.
6. If your files are in other folders, select
Organize tab and select Manage libraries >
Music.
Follow the onscreen instructions to add the
folders that contain your media files.
Enable sharing on Twonky Media
1. Visit www.twonkymedia.com to purchase
the software, or download a free 30-day trial
to your Macintosh.
2. Start Twonky Media on the Macintosh.
3. In the Twonky Media Server screen,
select Basic Setup and First steps.
The First steps screen appears.
4. Type a name for your media server, and
then click Save changes.
5. Back in the Twonky Media screen, select
Basic Setup > Sharing.
6. Browse and select folders to share, and
then select Save Changes.
Your Macintosh rescans the folders
automatically so that they are ready to share.
Play files from computer
Note: Before you play multimedia content
from the computer, make sure that the TV is
connected to the home network, and the
media server software is properly set up.
1. Switch on the computer and the router.
2. Switch on your TV.
3. Press on the remote control.
4. Select [Browse PC], then press OK. If the
network installation starts, follow the
onscreen instructions.
5. If the content browser is displayed, select
a file, then press OK.
The file starts to play.
6. Press the Play buttons on the remote
control to control play.
View pictures
To play a picture slideshow, select a
photo, then press OK.
To pause or stop playback, press OK
again.
To play the previous or next file, press
or .
Press OPTIONS to access one of the
following options:
[Show info]: Display the file
information.
[Stop]: Stop slideshow.
[Rotate]: Rotate the file.
[Repeat]: Repeat the slideshow.
Net TV and online video
What you can do
Enjoy Internet Applications (Apps), specially
adapted internet websites for your TV. You
can control the Apps with the TV remote
control. For example, you can:
Read newspaper headlines
Watch videos
Check weather forecasts
Use the catch-up TV feature to watch TV
programmes that you missed. Availability of
catch-up TV Apps differ for each country.
To find out which TV programmes are
available, access the Net TV programme
guide.
Find out more on Net TV services at the
Net TV forum website,
www.supportforum.philips.com.
Notes:
Each country has different Net TV
services.
Certain websites may not display
completely. Some functions are not
available, for example file download, or
functions that require plug-ins.
Net TV services are updated
automatically. To view the latest
updates, change [All] to [New]in the
[App Gallery].
Net TV displays one page at a time, in
full screen.
TP Vision Netherlands B.V. bears no
responsibility regarding the content and
the quality of the content provided by
the content service providers.
EN 23
English
What you need
To enjoy Net TV, complete these tasks:
1. On your home network, connect the TV
to the Internet
2. On your TV, configure Net TV.
3. On your PC, register with Philips to enjoy
exclusive benefits and receive updates on
product information. You can register now
or later.
Notes:
You can lock Net TV Applications
(Apps) with a 4 digit pin-code. All adult
Apps can be locked as one selection.
When you lock an adult Application,
the advertisements and Web pages not
adapted for Net TV remain accessible.
Connect the TV to the Internet
On your home network, connect the
following:
1. Connect a router with a high-speed
connection to the Internet.
2. Switch on the router.
3. Install the network. See Connect the TV
> Computers and the Internet (Page 55).
Configure Net TV
1. Press , select [Browse Net TV], and
then press OK to confirm.
The terms and conditions of use are
displayed.
2. To agree to the terms and conditions,
press OK. The registration menu is
displayed.
3. To register with Club Philips, select
[Register], then press OK.
4. Confirm the onscreen message.
A prompt asks if you want to lock adult
services.
5. To lock adult services, select [Lock], then
press OK.
To leave adult services unlocked, select
[Leave unlocked], then press OK.
6. To lock, enter a 4-digit code, then press
OK.
7. Re-enter the 4-digit code, then press OK.
The Net TV start page is displayed.
Access Net TV Applications (Apps)
The first page shown is the Net TV home
page. The icons on this page represent the
applications (Apps).
Browse Internet websites with the
Internet Apps.
Press the Navigation buttons to select
an App, then press OK to confirm.
Read the Net TV quick guide for more
information.
Access the App Gallery to add more
Apps to your home screen.
You can change country settings and
select Apps from other countries.
Access website
1. Select an Internet App, then press OK.
2. Use the Numeric buttons on the TV
remote control to enter a web address.
To return to the Net TV home page, press
FIND.
Onscreen keyboard
Select the area to enter the web address,
then press OK.
A keyboard appears on the screen.
Use this to enter a web address.
Clear Net TV memory
Warning: This option resets Net TV
completely.
You can clear the Net TV memory
completely, including your favourites, the
parental control code, passwords, cookies
and history.
EN 24
1. Press .
2. Select [Setup] > [Network settings].
3. Select [Clear Net TV memory], then
press OK.
Options
Press OPTIONS to select the following:
[Remove App]
[Lock App]
[Unlock App]
[Move App]
Show remote control
Keys such as play , rewind and fast
forward can be called up with [Show
remote control].
Press OPTIONS and select [Show
remote control]. Use the onscreen keys to
operate the connected audio or video
player.
Select a key and press OK to carry out its
function. Press to hide the onscreen keys.
Select P+ and P- to scroll up and down on a
web page.
Zoom page
To zoom in and out on an Internet page,
press OPTIONS and select [Zoom
page]. Use the slider bar to set the
enlargement.
To scroll through an Internet page, use the
Navigation buttons to jump from highlight
to highlight.
Reload page
If a page does not load correctly, reload it.
Press OPTIONS and select [Reload
page].
Security info
To view security information about a page,
press OPTIONS and select [Security
info].
Rent online video
With this TV, you can rent a video from an
online video store.
1. Open a video store. You may need to
register or enter your login.
2. Select a video.
3. Make the online payment.
4. Download a video.
To rent and download a video, you need a
high-speed Internet connection to the TV.
Read more about network connections in
Connect your TV > Computers and the
Internet (Page 55).
You also need an SD memory card to insert
into the TV SD card slot.
SD memory size
Use a blank SD memory card of type SDHC
class 6, with at least 4 GB of storage
capacity.
For high-definition video, make sure that you
use an SDHC card with at least 8 GB of
storage capacity.
Note: If the write speed is insufficient for
video transfer, the TV rejects the SD card.
Caution: This TV has a standard SD card slot
that can be used only for renting video.
Follow the instructions described here. If you
insert the card incorrectly, you might damage
the card. All existing content on the SD card
is erased before you download rented
videos.
Format an SD card
Before you download rented videos, your
SD card must be formatted.
EN 25
English
1. Switch on the TV.
2. As illustrated, insert the SD memory card
into the SD card slot on the side of the TV.
The TV automatically starts formatting the
card.
3. After formatting, leave the SD card in the
slot.
View a video store
1. Press .
2. Select [Browse Net TV] and press OK.
3. Access the App Gallery to search for
available video stores in your country.
4. Press the Navigation buttons to select a
store, then press OK to confirm.
The icon of the video store is added to the
home page.
5. To view a store, select its icon and press
OK.
Rent a video
To rent a video, select its icon on the video
store page and press OK. In most cases you
can rent a video for one day or for a couple
of days or even just 1 hour. The way you
select and rent a video varies from store to
store.
Payment
The store prompts you to log in or to open
a new account if you do not have one. The
login might consist of your email address and
a personal PIN code. When you are logged
in, you can select the payment method, a
credit card, or a value code in most cases.
Consult the video store website for more
information on its payment terms.
To enter a number code (PIN), use the
Numeric buttons on the remote
control.
To enter an email address, select the
text field on the page and press OK.
Select a character on the keyboard and
press OK to enter.
Download the video
When you have paid, you can download the
video on to the video memory. During the
download, you can continue to watch a TV
programme until the TV notifies you that the
video is ready to play.
If you cancel a download, you can still
download the video until the rental period
expires.
Watch video
1. Press , select [Browse Net TV].
The installed video stores are displayed.
2. Select the video store where you rented
the video, then press OK.
3. With your log-in information, enter the
online video store.
4. Select the video from the list of
downloaded videos, then press OK to play.
Games
Add a game console
Before you start, connect your game console
to this TV. Read Connect your TV >
Connect devices > Game console (Page
50).
For easy access, add the game console to
the Home menu.
1. Press .
2. Select [Add your devices] > [Game
console], then press OK.
3. Follow the onscreen instructions to add
the game console.
Smart picture setting - [Game]
The [Game] option in the [Smart picture]
settings menu optimises the TV display for
gaming without picture lag. Add the game
console to the Home menu as [Game
console]. The TV switches to the game
setting automatically.
If your game console is added to the Home
menu as a Blu-ray disc player or DVD player,
set the [Smart picture] setting to [Game]
before you start playing.
EN 26
To switch the [Smart picture] setting to
[Game],
1. Press ADJUST.
2. Select [Smart picture] > [Game], and
then press OK.
The TV is ready for gaming.
Note: Do not forget to switch back to your
usual [Smart picture] setting when you stop
gaming.
Start a two-player game
Some games offer multi-player and split-
screen gaming. With the 3D technology of
this TV, you can set the split-screen to
display as two full screen views. Two players
watch the same TV but see two different
screens to play the game. To view each
screen, you need a pair of gaming glasses for
each player.
What you need
Use the two-player kit that comes with
two pairs of glasses - Philips PTA436
(sold separately).
Connect the game console to the
HDMI connector on this TV.
Start a two-player game
1. Select the game console in the Home
menu and press OK.
2. On the game console, start the game and
select the multi or two-player mode. Select
the mode for split-screen viewing.
3. On the TV remote control, press
ADJUST and select [Two-player gaming].
4. Select the format in which the split-screen
game is displayed: [Side by side] or [Top /
bottom]
5. Press OK. The TV shows the two screens
as full screens.
To watch each of the two different screens,
each player puts on one of the pairs of
glasses - player 1 or player 2.
In and out of split-screen view
In two-player split-screen view, you can
switch back and forth from split-screen to
the combined view, to be able to read the
game menu or game scores.
To switch views back and forth, press OK
on the remote control of the TV.
Stop two-player game
To stop the two-player split-screen view,
press (Home) and select another activity.
Note: To switch back to watching 3D
content from a DVD player, press
ADJUST. Select [Two-player gaming] >
[Off], then press OK.
EN 27
English
3 Use more of
your TV
Pause TV
What you can do
While watching a digital channel, you can
pause a programme to answer an urgent
phone call or to have a break. The broadcast
is stored on a USB hard disk that is
connected to the TV; you can replay the
broadcast instantly.
Note:
The maximum time for which you can
pause a TV broadcast is 90 minutes.
What you need
To pause a TV broadcast, do the following:
Tune your TV to receive digital
channels. Pause TV works only on
digital TV channels. See Set up your TV
> Channels > Automatic install (Page
40).
Connect a USB hard disk to the TV.
Use a USB 2.0 compatible hard disk
with a minimum hard disk space of 32
gigabyte and a minimum transfer speed
of 30 megabytes per second.
Hard disk installation
Before you can pause a broadcast, you must
connect a USB hard disk to the TV and
format it.
Caution:
TP Vision is not responsible if the USB
storage device is not supported, nor is
it responsible for damage or loss of
data in the device.
Formatting removes all existing data on
the hard disk.
If you need extra USB connectors, use
a USB hub. Do not connect any other
USB device to the TV when you are
formatting the hard disk.
Do not overload the USB port. If you
connect a USB hard disk device that
consumes more than 500 mA power,
ensure that it is connected to its own
external power supply.
Once the USB hard disk device is
formatted for this TV, you cannot use it
on another TV or PC. Keep it
connected permanently to the TV.
1. Connect the USB hard disk to the USB
connector on the side of the TV.
2. Switch on the TV, and if necessary the
hard disk, if it has an external power source.
3. Switch to a digital TV channel and press
(pause) to start formatting.
4. Follow the onscreen instructions.
Warning:
The formatting process may take some time.
Do not switch off the TV or disconnect the
USB hard disk until this process is complete.
EN 28
Pause a live TV broadcast
1. On a digital channel, press (pause) to
pause a TV broadcast.
2. Press (play) to continue watching.
The status bar shows the following time
indicators:
A. When the programme is paused for the
first time.
B. Where the paused programme is
currently playing.
C. Where the live programme is currently
playing.
Press (reverse) or (forward) to
select where you want to start viewing
the stored broadcast.
Press (stop) to switch to live TV
broadcast again.
Note: You cannot pause the TV broadcast
when a recording is in progress.
The stored broadcast on the USB hard disk
is cleared if you do one of the following:
Disconnect the USB hard disk.
Start a programme recording.
Switch the TV to standby.
Switch to another channel.
Switch source to watch from a
connected device - a Blu-ray disc player
or digital receiver.
To change playback speed
Press or repeatedly.
To jump back to the beginning of the TV
broadcast
Press the left navigation button repeatedly
until you reach the beginning of the
broadcast storage.
Record TV shows
What you can do
If your TV is connected to the Internet, you
can record your favourite TV show or set a
programmed recording of a digital broadcast
onto a USB hard disk.
Start and manage the recordings from the
electronic programme guide on the TV. See
Use your TV > Watch TV > View
Programme Guide (Page 16).
Note: In some countries, recording is not
supported.
What you need
To record TV programmes, do the following:
Tune your TV to receive digital TV
channels (DVB broadcast or similar).
See Set up your TV > Channels >
Automatic install (Page 40).
Ensure your TV is connected to the
Internet with a high-speed broadband
connection. See Connect your TV >
Computers and the Internet (Page 55).
Connect a USB hard disk to the TV.
Use a USB 2.0 compatible hard disk
with a minimum hard disk space of 250
gigabyte and a minimum transfer speed
of 30 megabytes per second.
Note: You can use the same hard disk for
recording and pausing TV programmes.
EN 29
English
To check if the programme guide supports
recording:
Press and select [Programme guide]. If
you find a [TV Recording] button on the
programme guide page, you can set up and
manage recordings.
If the [TV Recording] button is not present,
ensure that the programme guide data is set
to be updated through the network. Select
> [Setup] > [TV settings] >
[Preferences] > [Programme guide] >
[From network].
Hard disk installation
Before you can record a TV programme,
you must connect a USB hard disk to the TV
and format it.
Caution:
TP Vision is not responsible if the USB
storage device is not supported, nor is
it responsible for damage or loss of
data in the device.
Formatting removes all data from the
connected USB hard disk device.
The USB hard drive is formatted
exclusively for this TV. Keep it
permanently connected to the TV. You
cannot use the stored recordings on
another TV or PC. Do not copy or
change the recording files on the USB
hard disk through any PC application.
This will corrupt your recordings.
Do not overload the USB port. If you
connect a USB hard disk device that
consumes more than 500mA power,
ensure that it is connected to its own
external power supply.
1. Connect the USB hard disk to the USB
connector on the side of the TV. If you need
extra USB connectors, use a USB hub.
Note: If you are using a USB hub, do not
connect any other USB device to the TV
when you are formatting the USB hard disk.
2. Switch on the TV and the hard disk, if it
has an external power source.
3. With the TV tuned to a digital TV channel,
press (pause) to start formatting.
4. Follow the onscreen instructions to
complete the formatting process.
Warning: The formatting process may take
some time. Do not switch off the TV or
disconnect the USB hard disk until this
process is complete.
Start recording
One touch recording
To record the programme you are currently
watching, if your TV remote control has a
(record) button:
1. Press (record). Recording starts
immediately and you can adjust the end time
of the recording in the pop-up window.
2. Select [Schedule]and press OK to confirm
the end time.
EN 30
If your TV remote control does not have a
button:
1. Press and select [Programme guide].
2. With the current TV programme selected,
press OPTIONS and select [Record].
The TV sets the end time of the recording
to the end of the programme.
3. Select [Schedule]and press OK to start
recording.
To stop recording immediately, press
(stop).
Notes:
While recording, you cannot switch TV
channels.
While recording, you cannot pause the
TV broadcast.
Schedule a recording
You can schedule a recording of an
upcoming programme for today or a few
days from today (maximum of 8 days away).
1. To schedule a recording, press and
select [Programme guide]. On the
programme guide page, select the channel
and programme that you wish to record.
Press the right or left navigation buttons
to scroll through programmes. You can
also enter the channel number to select
the channel in the list.
To change the date, select the date at
the top of the page and press OK.
Select the date you want and press
OK.
2. Select the programme, press
OPTIONS, and select [Record].
3. If needed, adjust the recording time to
add a buffer at the end of the programme.
Select [Schedule] and press OK. The
programme is scheduled for recording.
A warning displays automatically when
overlapping recordings are scheduled.
If you plan to record a programme during
your absence, remember to switch the TV
to standby and keep the USB hard disk
switched on.
Set a timed recording
To manually set a recording that is not linked
to any programme:
1. From the programme guide page, press
OPTIONS, select [Manual record], and
press OK.
2. Set the channel, date and time span in the
dialogue box.
3. Select [Schedule] and press OK.
Programme information
To view more information on a programme,
select the programme from the programme
guide and press OK. Depending on the
status of this programme, you can start
watching it, schedule its recording, play back
the recording, or delete the recording from
this page.
Manage recordings
List of recordings
To view the list of recordings and scheduled
recordings, select the [TV Recording]
button at the top of the programme guide
and press OK.
Note: The [TV Recording] button changes
to [{0} Recordings]after the TV recordings
are made. The number in front of the
button indicates how many recordings have
been made.
At this page, you can:
select a recording to watch,
delete a recording,
schedule a timed recording not linked
to a specific TV programme,
cancel a scheduled recording, or
check the remaining hard disk space.
Watch a recording
Select a recording from the recording list
and press OK. The playback of the recording
starts.
You can use the (play), (forward),
(rewind), (pause) or (stop) keys on the
remote control to control play.
Delete a recording
To delete an existing recording:
EN 31
English
1. Select the recording in the list and press
OPTIONS.
2. Select [Delete recording] and press OK.
Cancel a scheduled recording
To cancel a scheduled recording:
1. Select the recording and press
OPTIONS.
2. Select [Cancel recording] and press OK.
Expired recordings
Broadcasters can limit the number of days a
recording can be viewed after airing or
restrict playback. A recording in the list can
show the number of days before it expires.
An expired recording can no longer be
played.
Failed recordings
If a scheduled recording is prevented by the
broadcaster or if the recording does not
occur as per schedule, it is marked as
[Failed]in the recordings list.
Enjoy HbbTV
What you can do
Some broadcasters of digital channels offer
interactive HbbTV (Hybrid Broadcast
Broadband TV).
With HbbTV, broadcasters combine their
normal TV programme with all kinds of
information or entertainment. You can
browse this information interactively. You
can respond to a programme or vote, do
online shopping or pay for a video-on-
demand programme.
To fully enjoy HbbTV, you need to connect
your TV to the Internet. Read more about
connecting the TV to the Internet in
Connect your TV > Computers and the
Internet (Page 55).
Note: You cannot download files to your TV
with this feature.
Access HbbTV
When you tune to a TV channel that offers
HbbTV, the interactive pages will open
automatically or, at some point, you will be
invited to open them.
Depending on the broadcaster, you might
need to press the red button or OK on the
remote control to access the page.
To exit the HbbTV pages, select the relevant
button on screen and press OK.
Navigate HbbTV pages
To navigate the HbbTV pages, you can use
the navigation buttons, colour buttons,
number buttons, and the (back) button.
While you watch videos within HbbTV
pages, you can use (play), (pause) and
(stop) buttons.
HbbTV text
Some broadcasters offer HbbTV Text, a
new version of Text. Depending on the
broadcaster, you might need an Internet
connection to view HbbTV Text.
You can use the same remote control
buttons to navigate HbbTV Text as you did
to navigate HbbTV pages.
Block HbbTV
To block HbbTV from a specific channel
1.Press OPTIONS.
2. Select [HbbTV on this channel] > [Off].
To block HbbTV on all channels
1. Press (Home) and select [Setup].
2. Select [TV settings]TV settings >
[Preferences] > [HbbTV] > [Off].
EN 32
View Teletext
Select a page
1. Select a channel that has teletext feature,
then press TEXT.
2. Select a page in one of the following ways:
Enter the page number with the
Numeric buttons.
Press or to view the next or
previous page.
Press the Colour buttons to select a
colour coded item.
3. Press to exit.
Teletext options
1. When you view teletext, press
OPTIONS.
2. Select one of the following options:
[Freeze page] / [Unfreeze page]:
Freeze or unfreeze the current page.
[Dual screen] / [Full screen]: Enable or
disable dual screen teletext. Dual
screen splits the current channel or
source to the left of the screen, with
teletext on the right.
[T.O.P. overview]: Table Of Pages
(T.O.P.) teletext broadcasts allow you
to jump from one subject to another
without using page numbers.
[Enlarge] / [Normal view]: Zoom in on
the page. Press the Navigation buttons
to move around the enlarged view.
[Reveal]: Hide or reveal hidden
information on a page, such as solutions
to riddles or puzzles.
[Cycle subpages]: If subpages are
available, each is shown automatically.
[Language]: Switch to a different
language group to display different
character sets correctly.
3. Press OPTIONS to exit.
Teletext language
Some digital TV broadcasters provide several
teletext languages. You can set your primary
and secondary language.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Languages] > [Primary Text] or
[Secondary Text].
4. Select your preferred teletext languages,
then press OK.
Subpages
A teletext page can contain several
subpages. These subpages are shown on a
bar next to the main page number.
If subpages are available on a teletext page,
press or to select them.
Search
1. When you view teletext, press OK to
highlight the first word or number.
2. Press the Navigation buttons to skip to
the word or number to search.
3. Press OK to begin the search.
4. Press until no word or number is
highlighted to exit the search.
Digital teletext
Some digital TV broadcasters offer dedicated
digital text or interactive services on their
digital TV channels, for example, BBC1.
When in digital teletext:
Press the Navigation buttons to select
or highlight items.
Press the Colour buttons to select an
option, then press OK to confirm or
activate.
Note: Digital text services are blocked when
subtitles are broadcast and enabled on the
TV. Read Use more of your TV > View
subtitles (Page 34).
Teletext 2.5
Teletext 2.5 offers more colours and better
graphics than normal teletext. If Teletext 2.5
is broadcast by a channel, it is switched on
by default.
EN 33
English
To switch Teletext 2.5 on or off
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Text 2.5] > [On] or [Off], then
press OK.
Set locks and timers
Clock
You can display a clock on the TV screen.
The clock displays the time that is broadcast
by your TV service operator.
Display the TV clock
1. While you watch TV, press OPTIONS.
2. Select [Status], then press OK.
The clock is displayed on the lower right
hand corner of the TV screen.
Change the clock mode
The clock mode is automatically
synchronised to the Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
[Manual].
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Clock] > [Auto clock mode].
4. Select [Automatic], [Manual] or [Country
dependent], then press OK.
Enable or disable daylight saving
If clock mode is set to [Country
dependent], you can enable or disable
daylight saving for your time zone.
1. In the [Clock] menu, select [Daylight
saving] > [Daylight saving time] or
[Standard time], then press OK. Daylight
saving is enabled or disabled.
Set the clock manually
If clock mode is set to [Manual], set the date
and time manually.
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Use the Navigation buttons to make your
selection.
3. Select [Done], then press OK.
Sleeptimer
Sleeptimer switches the TV to standby after
a specified time. You can switch off your TV
earlier or reset the sleeptimer during the
countdown.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Sleeptimer].
3. Press the Navigation buttons to set the
sleeptimer.
The sleeptimer can be set up to 180
minutes, in steps of five minutes. The
sleeptimer is switched off if it is set to zero
minutes.
4. Press OK to activate the sleep timer. The
TV switches to standby after the specified
time.
Child lock
To protect children from unsuitable TV
programmes, you can lock the TV or block
age rated programmes.
Set or change the child lock code
1. Press .
2. Select [Setup] > [Channel settings] >
[Child lock].
3. Select [Set code], or [Change code].
4. Enter the code with the Numeric
buttons.
Tip: If you forget your code, enter '8888' to
override any existing codes.
Lock or unlock channels
1. In the child lock menu, select [Channel
lock].
2. Enter the child lock code with the
Numeric buttons. The [Channel lock] menu
appears.
3. Select channels to lock or unlock.
EN 34
Parental rating
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with
age ratings lower than your child's age.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Child lock] > [Parental rating].
A message prompts you to enter the child
lock code.
4. Enter the child lock code with the
Numeric buttons.
5. Select an age rating, then press OK.
All programmes above the selected age
rating are blocked.
For information on child lock codes, see Use
more of your TV > Set locks and timers >
Child lock (Page 33).
View subtitles
Analogue channels
1. Switch the TV to an analogue TV channel.
2. Press TEXT.
3. Enter the three-digit page number of the
subtitles page (usually '888').
4. Press to exit teletext.
Subtitles display if available.
Digital channels
1. Press OPTIONS.
2. Select [Subtitles], then press OK.
3. Select [Subtitles off], [Subtitles on] or
[On during mute], then press OK.
Note:
If MHEG application is activated,
subtitles are not displayed.
If you select [On during mute],
subtitles are displayed only when you
press to mute the sound.
Subtitle language
You can change the subtitle language on
some digital channels.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Subtitle language].
3. Select [Primary subtitles] or [Secondary
subtitles] for the preferred language.
4. Press OK to confirm.
Tip: You can also press OPTIONS >
[Subtitle language].
View Scenea
What you can do
You can display a default picture as the
wallpaper on your TV. You can also load
another picture as the wallpaper.
If the sleeptimer is off, the wallpaper is
displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleeptimer.
What you need
To use another picture as the wallpaper, you
need a USB storage device that contains a
picture that is less than 1 MB in size.
Switch on
1. Press .
2. Select [Scenea], then press OK.
The default picture is displayed.
Note: The wallpaper is displayed for the
duration of the sleeptimer. For more
information on sleeptimer, see Use more of
your TV > Set locks and timers >
Sleeptimer (Page 33).
Set TV wallpaper
You can load another picture as the
wallpaper.
Note: Loading a new picture overrides the
existing picture.
EN 35
English
1. Connect the USB storage device to the
TV.
2. Press .
3. Select [Browse USB], then press OK.
4. Select a picture, then press OPTIONS.
5. Select [Set as Scenea], then press OK.
6. Select [Yes], then press OK.
7. Press any button to exit Scenea.
Set Scenea lounge light
When the TV is in standby, you can switch
on Ambilight and create a lounge light effect
with your wallpaper. Ambilight is available on
certain models only.
When the TV is in standby, press
AMBILIGHT on the front of the TV.
Note: It can take more than 5 seconds for
the lounge light to switch on.
To select another colour for the lounge light,
see Use your TV > Ambilight > Setup.
Use EasyLink
What you can do
Get the most out of your HDMI-CEC
compliant devices with Philips EasyLink
enhanced control features. If your HDMI-
CEC compliant devices are connected
through HDMI, you can control them at the
same time with your TV remote control .
Note: Other brands describe HDMI-CEC
functionality differently. Some examples are
Anynet (Samsung), Aquos Link (Sharp) or
BRAVIA Sync (Sony). Not all brands are fully
compatible with Philips EasyLink.
After you switch on Philips EasyLink, these
features are available:
One-touch play
When you play an HDMI-CEC compliant
device, the TV switches on from standby,
and switches to the correct source.
One-touch standby
When you press on the TV remote
control, the TV and all HDMI-CEC
compliant devices switch to standby mode.
System audio control
If you connect an HDMI-CEC compliant
device that includes speakers, you can
choose to hear the TV from those speakers
instead of the TV speakers.
For more information about TV audio
output, see Use more of your TV > Use
EasyLink > Select speaker output (Page 36).
EasyLink remote control
You can control multiple HDMI-CEC
compliant devices with your TV remote
control.
To switch on EasyLink Remote Control, see
Use more of your TV > Use EasyLink >
Control devices simultaneously (Page 36).
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
switch on Pixel Plus Link.
To switch on Pixel Plus Link, see Use more
of your TV > Use EasyLink > Retain picture
quality (Page 37).
Maximize display for subtitled video
While you view subtitles in a video, you can
maximize the video display area. Some
subtitles can create a separate subtitle bar
under the video, which limits the video
display area. After you switch on auto
subtitle shift, the subtitles display on top of
the video image, which maximizes the video
display area.
To switch on auto subtitle shift, see Use
more of your TV > Use EasyLink >
Maximize display for video with subtitles
(Page 37).
Hear another device at standby
You can hear a connected HDMI-CEC
compliant device through the TV speakers,
even when the TV is in standby.
To switch on, see Use more of your TV >
Use EasyLink > Hear another device at TV
standby (Page 37).
What you need
To benefit from Philips EasyLink advanced
control features, make sure that you do the
following:
EN 36
Connect at least two HDMI-CEC
compliant devices through HDMI
Configure each HDMI-CEC compliant
device properly
Switch on EasyLink
Switch on
To switch on or off EasyLink
Note: If you do not intend to use Philips
Easylink, switch it off.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [On] or [Off], then press OK.
Control devices simultaneously
If you connect multiple HDMI-CEC devices
that support this setting, all the devices
respond to the TV remote control.
Caution: This is an advanced setting. Devices
that do not support this setting will not
respond to the TV remote control.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [EasyLink Remote Control] >
[On] or [Off].
4. Press OK to activate.
Notes:
To switch back to TV control, press ,
then select [Watch TV].
To control another device, press ,
then select the device from the Home
menu.
To exit, press .
EasyLink buttons
Control HDMI-CEC compliant devices with
the following buttons on the TV remote
control.
OK: Start, pause or resume play on the
connected device, activate a selection,
or access the device menu.
(Previous) / (Next): Search
backwards and forwards on the
connected device.
Numeric buttons: Select a title, chapter
or track.
Play buttons: Control video or music
play.
Standby: Display the menu of the
connected device.
: Display the TV menu.
(Standby): Switch the TV and the
connected device to standby.
Other EasyLink buttons are available through
the On-Screen Remote Control (OSRC).
To access the OSRC
1. While you view content from a connected
device, press OPTIONS.
2. Select [Show device keys], then press
OK.
3. Select an onscreen button, then press OK.
4. Press to exit.
Select speaker output
If the connected device is HDMI Audio
Return Channel (HDMI ARC) compliant,
you can output TV audio through an HDMI
cable. An additional audio cable is not
required. Make sure you connect the device
to the HDMI ARC connector on the TV.
See Connect your TV > About cables >
HDMI (Page 46).
Configure TV speakers
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3. Select one of the following options, then
press OK:
[Off]: Switch off TV speakers.
[On]: Switch on TV speakers.
[EasyLink]: Stream TV audio through
the connected HDMI-CEC device.
Switch the TV audio to the connected
HDMI-CEC audio device through the
adjust menu.
[EasyLink autostart]: Turn off TV
speakers automatically and stream TV
audio to the connected HDMI-CEC
audio device.
EN 37
English
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are
selected, access the adjust menu to switch
the TV audio.
1. While you watch TV, press ADJUST.
2. Select [Speakers], then press OK.
3. Select one of the following, then press
OK:
[TV]: On by default.
Stream TV audio through the TV and
the connected HDMI-CEC audio
device until the connected device
switches to system audio control. TV
audio is then streamed through the
connected device.
[Amplifier]: Stream audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio continues to stream from
the TV speakers. If [EasyLink autostart]
was enabled, the TV prompts the
connected device to switch to system
audio mode.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
switch on Pixel Plus Link.
To switch on Pixel Plus Link
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [Pixel Plus link] > [On], then press
OK.
Maximize video display
Some subtitles can create a separate subtitle
bar under the video, which limits the video
display area. After you switch on auto
subtitle shift, the subtitles display over the
video image, which maximizes the video
display area.
Switch on auto subtitle shift
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [Auto subtitle shift].
3. Select [On], then press OK to activate.
Note: Make sure that the picture format of
the TV is set to [Auto format] or [Movie
expand 16:9].
Hear another device at TV standby
You can hear a connected HDMI-CEC
compliant device through the TV speakers,
even when the TV is in standby.
1. Press ADJUST to receive audio from
the connected Philips EasyLink device.
If available, audio only mode is enabled.
2. Accept the prompt on the TV to turn off
the TV screen.
3. Control the audio playback with the TV
remote control.
EN 38
4 Set up your TV
Settings assistant
Use the settings assistant to guide you
through the picture and sound settings.
1. While you watch TV, press .
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Start], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.
Picture and sound
More picture settings
1. Press .
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust:
[Smart picture]: Access predefined
smart picture settings.
[Reset]: Reset to default settings.
[Contrast]: Adjust the intensity of the
bright areas, keeping dark areas
unchanged.
[Brightness]: Adjust the intensity and
details of the dark areas.
[Colour]: Adjust colour saturation.
[Hue]: Compensate colour variations in
NTSC encoded transmissions.
[Sharpness]: Adjust sharpness in the
image.
[Noise reduction]: Filter and reduce
noise in the image.
[Tint]: Adjust the colour balance in the
image.
[Custom tint]: Customise tint setting.
[Pixel Plus HD]/ [Pixel Precise HD]:
Access advanced settings, including
[HD Natural Motion], *[Perfect
Natural Motion], [Clear LCD], [Super
resolution], [Dynamic contrast],
[Dynamic backlight], [MPEG artefact
reduction], [Colour enhancement],
[Gamma].
*Available on certain models only.
[PC mode]: Allow picture settings to
be changed when a PC is connected to
the TV through HDMI.
If enabled, you can select [Picture
format] > [Unscaled] which provides
maximum detail for display of PC
content.
[Light sensor]: Adjust settings
dynamically to match lighting conditions.
[Picture format]: Change the picture
format.
[Screen edges]: Change the picture
size.
[Picture shift]: Adjust the position of
the picture. You cannot select this
setting if the selected picture format is
Auto zoom or Wide screen.
More sound settings
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to adjust:
[Smart sound]: Access predefined
smart sound settings.
[Reset]: Reset to factory default
settings.
[Bass]: Adjust the bass level.
[Treble]: Adjust the treble level.
[Surround]: Enable spatial sound.
[Headphones volume]: Adjust
headphone volume.
[Auto volume leveling]: Automatically
reduce sudden volume changes, for
example when switching channels.
[Balance]: Adjust the balance of the left
and right speakers.
EN 39
English
Audio settings
Select audio language
If the TV channel has multiple or dual sound
broadcast, you can select the preferred
audio language.
While you watch TV, press OPTIONS.
[Audio language]: Select the audio
language for digital channels.
[Dual I-II]: Select the audio language for
analogue channels.
Digital TV channels can stream several audio
languages. If multiple languages are available,
select the preferred language.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Language].
3. Select one of the following settings, then
press OK:
[Primary audio] / [Secondary audio]:
Select the available audio language.
Set a secondary language in the same
menu. If the primary language is
unavailable, the TV receives this
language.
[Preferred audio format]: Select to
receive standard audio format (MPEG)
or advanced audio formats (AAC, EAC-
3 or AC-3 if available).
[Mono/Stereo]: Select mono or stereo
audio if stereo broadcasting is available.
4. Press to exit.
Reset to factory settings
You can restore default picture and sound
settings, while the channel installation settings
remain the same.
1. While you watch TV, press .
2. Select [Setup] > [TV settings] > [Factory
settings], then press OK.
TV settings are reset to default.
Channels
Reorder and rename
Reorder channels
After the channels are installed, you can
reorder the channel list to your preference.
1. While you watch TV, press FIND. The
channel list is displayed.
2. Select the channel to reorder and press
OPTIONS.
3. Select [Reorder], then press OK.
4. Press the Navigation buttons to move the
highlighted channel to another location, then
press OK.
5. Select one of the following options, then
press OK.
[Insert]: Insert the channel into the
desired location.
[Swap]: Swap location with another
channel.
6. Once complete, press OPTIONS and
select [Exit].
Rename channels
After the channels are installed, you can
rename them to your preference.
1. While you watch TV, press FIND. The
channel list is displayed.
2. Select the channel to rename and press
OPTIONS.
3. Select [Rename], then press OK.
4. In the entry screen, press the Navigation
buttons or Numeric buttons to edit the
name, then press OK.
Tip: You can press OK in the entry screen
to enable the Onscreen Keyboard.
5. Once complete, press the Navigation
buttons to select [Done].
To clear the entry, select [Clear].
To cancel, select [Cancel].
6. Press OK to confirm.
7. Press to exit.
.
EN 40
Update channel list
When the TV was switched on for the first
time, a full installation of channels was
performed.
You can automatically add or remove digital
channels or manually update channels.
Note: If you are prompted to enter a code,
enter '8888'.
Automatic update
To automatically add or remove digital
channels, leave the TV in standby mode. The
TV updates channels and stores new
channels everyday. Empty channels are
removed from the channel list.
If a channel update is performed, a message
appears at startup.
If you do not want this message to appear
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Channel installation] > [Channel
update message].
4. Select [Off], then press OK.
To disable automatic updates
In the [Channel installation] menu, select
[Automatic channel update] > [Off].
To manually update channels
1. Press .
2. Select [Setup] > [Search for channels] >
[Update channels], then press OK.
3. Follow the onscreen instructions to
update the channels.
Automatic install
When the TV was switched on for the first
time, a full installation of channels was
performed. You can run this full installation
again to set your language, country and install
all available TV channels.
Select network
To install cable or antenna channels, you
need to switch to the respective network.
1. While you watch TV, press .
2. Select [Setup] > [Channel settings].
3. Select [Channel installation] > [Antenna
or Cable DVB].
4. Select one of the following settings:
[Antenna (DVB-T)]: Access free-to-air
antenna or digital DVB-T channels.
[Cable]: Access cable or digital DVB-C
channels.
5. Press OK to confirm.
6. Press to exit.
Start installation
1. Press .
2. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
3. Follow the onscreen instructions to
complete the channel installation.
4. Once complete, select [Finish], then press
OK.
Tip: Press FIND to see the channel list.
Notes:
During installation, leave settings
unchanged unless your digital provider
gives you the specific values to enter.
When digital TV channels are found,
the list of installed channels may display
empty channel numbers. You can
rename, reorder or uninstall these
channels.
Install analogue channels
You can search and store analogue TV
channels manually.
Step 1: Select your system
Note: Skip this step if your system settings
are correct.
1. While you watch TV, press .
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Analogue: Manual installation] >
[System], then press OK.
4. Select the system for your country or
region, then press OK.
Step 2: Search and store new TV channels
1. In the [Analogue: Manual installation]
menu, select [Find channel], then press OK.
2. Select one of the following options:
EN 41
English
Press the Navigation buttons or
Numeric buttons to manually enter the
channel frequency.
Select [Search] then press OK to
search for the next channel
automatically.
3. When the correct channel frequency is
entered, select [Done], then press OK.
4. Select [Store as new channel], then press
OK to store the new TV channel.
Install digital and satellite channels
Install digital channels
To improve TV reception, reposition the
antenna. You need to know the correct
frequency to tune. For best results, contact
the service provider or get a professional
installer.
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Digital: Reception test] >
[Search], then press OK.
4. Press the Numeric buttons to enter the
channel frequency.
5. Select [Search], then press OK.
6. When the correct channel is located,
select [Store], then press OK.
7. Press to exit.
Notes
If the reception is poor, reposition your
antenna and repeat the procedure.
If you receive the channel with DVB-C,
select [Automatic] in [Symbol rate
mode] unless your cable provider
supplies you with a specific symbol rate
value.
Install satellite channels
Note: Available on certain models only.
[Search for satellite] is only available if the
TV supports DVB-S.
If your satellite receiver is connected to the
SAT connector, you can receive satellite
channels.
1. While you watch TV, press .
2. Select [Setup] > [Search for satellite] >
[Reinstall channels].
3. Follow the onscreen instructions to
complete the installation.
4. Once complete, select [Finish], and then
press OK.
View satellite channels
To watch satellite channels, press >
[Watch satellite].
Fine-tune channels
If the reception of an analogue TV channel is
poor, fine-tune the TV channel.
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Analogue: Manual installation] >
[Fine tune], and then press OK.
4. Press or to fine-tune the channel.
5. When you have selected the correct
channel frequency, select [Done], and then
press OK.
6. Select one of the following options, then
press OK.
[Store current channel]: Store the
channel as the current channel number.
[Store as new channel]: Store the
channel as a new channel number.
Reinstall channels
ATTENTION: This feature is intended for
dealers and service personnel.
You can copy channel lists from one Philips
TV to another through a USB storage
device. You do not need to search for
channels or install them again on the second
TV. The channel list file is small enough to fit
on any USB storage device.
What you need
The two Philips TVs must have:
the same country setting,
the same year range,
the same DVB type, as indicated by the
suffix (H, K, T, or D/00) in the model
name,
the same settings for satellite channels,
including the number of LNB satellites
EN 42
the same hardware type, as indicated
by the sticker on the back of the TV,
(for example Qxxx.xx.Lx), and
compatible software versions.
An onscreen message will notify you if the
channel list cannot be copied to the second
TV.
Note: If you are prompted to enter a code,
enter '8888'.
Copy channel list to USB
1. Connect a USB storage device to the TV
with the channels installed on it.
2. Press .
3. Select [Setup] > [TV settings] >
[Preferences] > [Channel list copy] >
[Copy to USB], then press OK. The channel
list is copied to the USB storage device.
4. Unplug the USB storage device.
Copy channel list to TV with no channels
installed
1. Switch on the TV with no channels
installed on it to start the initial installation.
Select the language and country. The
country setting must be the same as that of
the TV whose channel list you want to copy.
Skip the search for channels.
2. Connect the USB storage device
containing the channel list to the TV.
3. Press .
4. Select [Setup] > [TV settings] >
[Preferences] > [Channel list copy] >
[Copy to TV], then press OK.The channel
list is copied to the TV.
5. Unplug the USB storage device.
Copy channel list to TV with channels
installed
1. Switch on the TV on which you want to
copy the channel list.
2. Press .
3. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
You will be prompted to select the country
where the TV was installed. Make a note of
the current setting and press followed by
[Cancel] to exit.
4. If the country setting on the TV is different
from that of the TV whose channel list you
want to copy, reinstall the TV and select the
country setting to match the first TV. See Set
up your TV > Reinstall the TV (Page 45).
5. Connect the USB storage device
containing the channel list to the TV where
you want to copy the channel list.
6. Select [Setup] > [TV settings] >
[Preferences] > [Channel list copy] >
[Copy to TV], then press OK. The channel
list is copied to the TV storage device.
7. Unplug the USB storage device.
Menu language
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
3. Select a menu language from the list, then
press OK.
Set universal access
Switch on
Some digital TV broadcasters provide special
audio and subtitle features for people who
are hearing or visually impaired.
To enable these features, turn on universal
access in the preference menu.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Universal access] > [On], then
press OK.
Hearing impaired
Tip: To verify whether a hearing impaired
audio language is available, press
OPTIONS and select [Audio language].
Languages with an ear icon support hearing
impaired audio.
EN 43
English
To switch on hearing impaired audio and
subtitles
1. While you watch TV, press OPTIONS.
2. Press one of the following buttons to
select an option:
Red: Switch hearing impaired on or off.
Green: Switch on hearing impaired
audio and subtitles.
3. Press to exit.
Visually impaired
Tip: To verify whether visually impaired
audio is available, press OPTIONS and
select [Audio language]. Languages with an
eye icon support visually impaired audio.
To switch on visually impaired audio (if
available)
1. While you watch TV, press OPTIONS.
2. Press the green button to select [Visually
impaired].
3. Press one of the following buttons to
select an option:
Red - [Off]: Turn off visually impaired
audio.
Yellow - [Headphones]: Hear visually
impaired audio from headphones only.
(if applicable)
Green - [Speakers]: Hear visually
impaired audio from speakers only.
Blue - [Speakers + headphones]: Hear
visually impaired audio from speakers
and headphones.
4. Press to exit.
Note: If the EasyLink remote control is
enabled, you cannot select the green or
yellow buttons. To disable, see Use more of
your TV > Use EasyLink > Switch on (Page
36).
Adjust volume for the visually impaired
1. In the [Universal access] menu, press the
yellow button to select [Mixed volume].
2. Press the Navigation buttons to move the
slider up or down, then press OK.
3. Press to exit.
Audio feedback for the visually impaired
This feature enables audio feedback when
buttons are pressed on the remote control
or TV.
1. In the [Universal access] menu, press the
blue button to select [Key beep].
2. Press the green button to turn on audio
feedback, or press the red button to turn it
off.
3. Press to exit.
Other settings
TV demo
Start a demo to find out more about your
TV's features.
Note: Demos are not supported on MHEG
channels.
1. While you watch TV, press .
2. Select [Setup] > [Watch demos], then
press OK.
3. Select a demo, then press OK.
4. Press to exit.
Update software
TV software
Check software version
1. Press .
2. Select [Setup] > [Software settings] >
[Current software info], then press OK.
The version of the current software is
displayed.
Caution: Do not install a lower version of
software than the current version installed
on your product. TP Vision cannot be held
liable or be made responsible for problems
caused by a software downgrade.
Update the software through one of these
options:
update with USB flash drive
update from digital broadcast
update from the Internet
EN 44
For more information, see the following
pages.
Update with USB
Before performing this procedure, make sure
that you have the following:
Spare time to complete the entire
update.
A USB flash drive that has at least
256MB of storage space, is FAT or
DOS formatted, and has its write
protection disabled.
Access to a computer with a USB port
and internet access.
Note: Do not use a USB hard drive.
1. Press .
2. Select [Setup] > [Update software], then
press OK.
The update assistant starts.
3. Follow the onscreen instructions to start
the update.
Note: The update assistant directs you to
the Philips support website. Refer to the
installation instructions on the website to
complete the update.
Update from the Internet
To update the TV software directly from the
Internet, connect the TV to the Internet
through a router with a high-speed
connection.
1. Press > [Setup] > [Update software],
then press OK.
2. Select [Internet], then press OK.
3. Follow the onscreen instructions to start
the update.
When the update is complete, the TV
switches off and back on again automatically.
Wait for the TV to switch back on. Do not
use the power switch on the TV or the
remote control.
Note: If the TV is connected to the Internet,
the TV displays the availability of new
software at startup.
Update from digital broadcast
When available, your TV can receive
software updates through digital broadcasts.
A message appears prompting you to update
the software. We strongly recommend that
you update the software when prompted.
Follow the instructions on screen.
Note: If you choose to update the software
at a later time, select > [Setup] > [Software
settings] > [Local updates].
Onscreen Help
What you need
Before you update the onscreen [Help],
make sure that you have the following:
A USB storage device that is FAT or
DOS-formatted.
A PC with Internet access.
An archive utility that supports the ZIP
file format (for example, WinZip for
Microsoft Windows or Stufflt for
Macintosh).
Note: Do not use a USB hard drive.
Download the latest file
1. Insert a USB storage device into the USB
connector on your PC.
2. Create a folder named ‘upgrades’ in the
root directory of the USB storage device.
3. In your web browser, navigate to
www.philips.com/support.
4. At the Philips Support site, find your
product and locate the [Help] file for your
TV. The file (a *.upg file) is compressed into
a *.zip archive.
5. If the [Help] file is a later version than the
file in your TV, click it.
6. Save it to your PC.
7. Using an archive utility, extract the *.upg
file from the *.zip file.
8. Save the *.upg file to the ‘upgrades’ folder
in the USB storage device.
9. Disconnect the USB storage device from
the PC.
Update [Help]
Do not switch off the TV or remove
the USB storage device during the
update.
EN 45
English
If a power failure occurs during the
update, do not remove the USB
storage device from the TV. The TV
continues to update as soon as power
is restored.
If an error occurs during the update,
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
1. Switch on the TV.
2. Disconnect all other USB devices from the
TV.
3. Connect the USB storage device
containing the *.upg file to the USB
connector on the TV.
4. Press .
5. Select [Setup] > [Software settings] >
[Local updates].
The updates screen appears.
6. Select the '*.upg' file and press OK.
A message displays the update status.
7. Follow the onscreen instructions to
complete the update and restart your TV.
Reinstall the TV
Reinstall your TV to reset all picture and
sound settings and reinstall all TV channels.
1. Press .
2. Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the onscreen instructions.
EN 46
5 Connect your
TV
About cables
Cable quality
Overview
Before you connect devices to the TV, check
the available connectors on the device.
Connect the device to the TV with the
highest quality connection available. Good
quality cables ensure a good transfer of
picture and sound.
The connections shown in this user manual
are recommendations only. Other solutions
are possible.
Tip: If your device only has composite or
RCA connectors, use a SCART-cinch
adapter to connect the device to a SCART
connector on the TV.
HDMI
An HDMI connection has the best picture
and sound quality.
An HDMI cable combines video and
audio signals. Use HDMI for high-
definition (HD) TV signals, and to
enable EasyLink.
An HDMI Audio Return Channel
(ARC) connector allows output of TV
audio to an HDMI ARC compliant
device.
Do not use an HDMI cable longer than
5 meters / 16.4 feet.
Y Pb Pr
Use the Component Video (Y Pb Pr)
connection together with an Audio Left and
Right connection for sound.
Y Pb Pr can handle high-definition (HD) TV
signals.
Match the Y Pb Pr connector colours to the
cable plugs.
EN 47
English
SCART
A SCART cable combines video and audio
signals.
SCART connectors can handle RGB video
signals but cannot handle high-definition
(HD) TV signals.
VGA
Use this connection to display PC content
on the TV.
For video and sound, use the VGA and
AUDIO IN connectors.
Connect devices
Overview
You can connect your devices to the TV with any of the following options. After connection, press
> [Add your devices].
EN 48
Blu-ray or DVD disc player
Connect the disc player with an HDMI cable to the TV.
Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
TV receiver
Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on
certain models only.)
EN 49
English
Connect the satellite or digital TV receiver with an HDMI cable to the TV.
Connect the satellite or digital TV receiver with a SCART cable to the TV.
Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R
cable to the TV.
EN 50
Recorder
Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.)
Connect the recorder with a SCART cable to the TV.
Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Game console
The most practical connectors for a game
console are on the side of the TV. However,
you can also use the connectors at the back
of the TV.
For the best gaming experience, set the TV
to game mode.
1. Press ADJUST.
2. Select [Smart picture] > [Game], then
press OK.
3. To exit, press .
EN 51
English
Connect the game console with an HDMI cable to the TV.
Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Home theatre system
Connect the home theatre with an HDMI cable and an optical cable to the TV.
EN 52
Connect the home theatre with a SCART cable to the TV.
Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Digital camera
Connect the digital camera with a USB cable to the TV.
EN 53
English
Digital camcorder
Connect the digital camera with an HDMI cable to the TV.
Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Connect more devices
External hard disk
Connect the external hard disk with a USB cable to the TV.
EN 54
Computer
Connect the computer with an HDMI cable to the TV.
Connect the computer with a DVI-HDMI cable to the TV.
Connect the computer with a VGA cable and an audio cable to the TV.
Keyboard and mouse
USB keyboard
*Available on certain models only.
You can connect a USB keyboard to enter
text on the TV. You can also type in a new
channel name or subject name in the
YouTube application within Net TV.
To install the USB keyboard
Switch on the TV. Connect the USB
keyboard to the USB connector on the side
of the TV. If you need extra USB connectors,
use a USB hub.
Once the TV detects the keyboard, select
the keyboard layout and test your selection.
EN 55
English
If you have selected a Cyrillic or Greek
keyboard layout first, you can also add a
second keyboard with Latin layout.
To change the keyboard layout setting, press
> [Setup] > [TV settings] >
[Preferences] > [USB mouse/keyboard] >
[Keyboard settings] and press OK .
TV keys on your keyboard
To make a text entry, you can use these
keys:
Enter : OK
Backspace : delete a character
before the cursor
Navigation keys : navigate within a text
field
(if a second keyboard layout is set) to
switch between different keyboard
layouts, press the Altand Shift keys
simultaneously.
Net TV keys on your keyboard
Enter : OK to confirm an entry.
Backspace : return to the previous
page.
Navigation keys : navigate to the next
field.
Home : scroll to the top of the page.
End : scroll to the bottom of the page.
Page Up : jump one page up.
Page Down : jump one page down.
+/- : zoom in or out one step.
* : fit to the width of the page.
USB mouse
*Available on certain models only.
You can connect a USB mouse to navigate
pages on the Internet. On an Internet page,
you can select and click on links more easily.
The USB mouse cannot navigate in Net TV
application pages nor navigate in the TV
menus.
To install the USB mouse
Switch the on TV. Connect the USB mouse
to the USB connector on the side of the TV.
If you need extra USB connectors, use a
USB hub. You can also connect the USB
mouse to a connected USB keyboard.
Once the TV detects the mouse, set the
tracking speed. Navigate into the test area to
check the speed.
To use the USB mouse with your TV
Left mouse button (left-click) :OK
Right mouse button (right-click) :
(Back)
Scroll wheel : to scroll up and down an
internet page.
Computers and the
Internet
What you can do
Browse PC
If you connect the TV to a home network,
you can play photos, music and videos from
your computer or storage device. Once the
network is installed on the TV, you can find
and play the files from your PC on the TV
screen.See (Page 21).
Note: If the apparatus does not recover in
DLNA mode due to external electrical
disturbances (e.g. electrostatic discharge),
user intervention is required.
Net TV
If you connect the TV to a home network
with an Internet connection, you can link up
the TV to Net TV. Net TV offers Internet
services and websites tailored to your TV.
Play music and videos, consult infotainment,
rent movies and much more. Once the
network is installed, you can enjoy the best
of the Internet for your TV. See Use your
TV > Net TV and online video (Page 22).
Interactive TV
If you connect the TV to the Internet, you
can enjoy the full benefits of Interactive TV.
Systems such as HbbTV, MHP, DTVi etc. use
the Internet to communicate with the TV.
The availability of these systems depends on
your local service provider.
EN 56
Wi-Fi MediaConnect
With Wi-Fi MediaConnect you can bring up
(project) your PC screen on the TV screen
wirelessly. You start Wi-Fi MediaConnect
from your PC. See Connect your TV >
Computers and the Internet > (Page 59).
What you need
Warning: This TV complies with the EMC
directive only when you use a shielded
Cat5 ethernet cable.
To connect your TV to computers, the
Internet, or both, you need:
An ethernet cable that is shorter than 3
metres.
A computer network that includes:
a) A universal plug-and-play (UPnP)
router and
b) A computer with one of these
operating systems: Microsoft Windows
XP, Microsoft Windows Vista, Mac
OSX, or Linux.
To connect your TV to computers, you
also need media server software that is
set to share files with your TV. See Use
your TV > Browse PC through DLNA
(Page 21).
To connect your TV to the Internet,
you also need a high-speed connection
to the Internet.
Note: This DLNA1.5 network feature
supports these computer operating systems:
Microsoft Windows XP or Vista, Intel Mac
OSX or Linux.
Connect
You can connect this TV to your home
network through a wired or wireless
connection.
To make a wired connection,see
Connect your TV > Computers and
the Internet > Wired connection
(Page 56).
To make a wireless connection, see
Connect your TV > Computers and
the Internet > Wireless connection
(Page 57).
Wired connection
1. Switch on the router and switch on its
DHCP setting.
2. Connect the router with an ethernet cable
to the TV.
3. Press , select [Setup] > [Connect to
network], then press OK.
4. Follow the on-screen instructions to install
the network.
5. Wait for the TV to find the network
connection.
6. If you are prompted, agree to the End
User License Agreement.
EN 57
English
Wireless LAN ready
This section is only for wireless ready TVs.
With the Wireless USB adapter PTA01
accessory (sold separately), you can connect
the TV to your home network wirelessly.
You can enjoy the best of the web from Net
TV services, and sharing of content between
your devices connected to the home
network using Wi-Fi MediaConnect or
DLNA, seamlessly and hassle free.
Note:
The wireless network operates in the
same 2.4GHz frequency spectrum as
common household devices, such as
Dect phones, microwave ovens or
Bluetooth devices, which can cause Wi-
Fi interferences. Move these devices
away from the TV with the connected
Wireless USB adapter.
You should turn off any unused
network equipment in the home
network as this increases network
traffic.
Reception quality is dependent on the
location of the wireless router, as well
as the quality of services provided by
the local Internet Service Provider.
When playing video over your wireless
home network, we recommend that
you use an IEEE 802.11 N router. The
connection speed may differ according
to the operating environment of your
wireless home network.
Make your TV wireless
1. Switch on your wireless network router.
2. Insert the USB adapter PTA01 into the
USB connection at the side of the TV. The
wireless installation starts automatically.
3. Follow the on screen instructions.
WPS - Wi-Fi Protected Setup
If your router supports WPS (Wi-Fi
Protected Setup), press the WPS button on
the router. Return to the TV in 2 minutes,
select [WPS] and press OK. The TV
connects to your network. This takes about
2 minutes. Complete the installation.
Most new wireless routers have the WPS
system and carry the WPS logo. The WPS
system uses WPA security encryption and
cannot be combined with devices on your
network that use the WEP security
encryption. If you still need this WEP device
in your network, install with [Scan] >
[Custom].
Scan for routers
If you have several routers in your network,
you can select the network you need. To
select a specific network router, press
[Scan]on the first page of the installation.
The routers with WPS and the strongest
signal are shown first in the list on screen.
Select the router you need. If you are
connecting a WPS router, select [WPS] on
the TV.
If you have set the PIN code in your
router software, select [WPS pincode:]
and enter the code.
To enter the encryption key manually,
select [Custom] and enter the key.
PIN code
To set the secured connection with a PIN
code, select the PIN code and press OK.
Write down the 8 digit PIN code shown on
the TV and enter it in the router software
on your PC. See the router manual for
where to enter the PIN code.
Custom
To enter the encryption key (the security
key) manually, select [Custom] and press
OK. If you have WPA security on your
router, enter the passphrase with the
remote control.
To access the on-screen keyboard, select the
text entry field and press OK. If you have
WEP security encryption, the TV asks for the
WEP encryption key in hexadecimal
numbers.
EN 58
Find this hexadecimal key in the router
software on your PC. Write down the first
key of the WEP keys list and enter it on the
TV with the remote control. If the security
key is accepted, the TV is connected with
the wireless router.
If asked, agree to the End User License
Agreement.
If you are using the Wireless USB adapter,
keep it connected to the USB connector on
the TV.
Wireless connection
This section is only applicable to Wi-fi
integrated TVs such as the PFL7666 and
PDL7906 series. You can connect the TV to
your home network wirelessly. You can
enjoy the best of the web from Net TV
services, and sharing of content between
your devices connected to the home
network using Wi-Fi MediaConnect or
DLNA, seamlessly and hassle free.
Notes:
The wireless network operates in the
same 2.4GHz frequency spectrum as
common household devices, such as
Dect phones, microwave ovens or
Bluetooth devices, which can cause Wi-
Fi interferences. Move these devices
away from the TV with the connected
Wireless USB adapter.
You should turn off any unused
network equipment in the home
network as this increases network
traffic.
Reception quality is dependent on the
location of the wireless router, as well
as the quality of services provided by
the local Internet Service Provider.
When playing video over your wireless
home network, we recommend that
you use an IEEE 802.11 N router. The
connection speed may differ according
to the operating environment of your
wireless home network.
Start wireless setup
1. Switch on your wireless network router.
2. Press on the TV remote control.
3. Select [Setup] > [Connect to network]
and press OK.
4. Follow the on-screen instructions.
WPS - Wi-Fi Protected Setup
If your router supports WPS (Wi-Fi
Protected Setup), press the WPS button on
the router. Return to the TV in 2 minutes,
select [WPS] and press OK. The TV
connects to your network. This takes about
2 minutes. Complete the installation.
Most new wireless routers have the WPS
system and carry the WPS logo. The WPS
system uses WPA security encryption and
cannot be combined with devices on your
network that use the WEP security
encryption. If you still need this WEP device
in your network, install with [Scan] >
[Custom].
Scan for routers
If you have several routers in your network,
you can select the network you need. To
select a specific network router, press
[Scan]on the first page of the installation.
The routers with WPS and the strongest
signal are shown first in the list on screen.
Select the router you need. If you are
connecting a WPS router, select [WPS] on
the TV.
If you have set the PIN code in your
router software, select [WPS pincode:]
and enter the code.
To enter the encryption key manually,
select [Custom] and enter the key.
PIN code
To set the secured connection with a PIN
code, select the PIN code and press OK.
Write down the 8 digit PIN code shown on
the TV and enter it in the router software
on your PC. See the router manual for
where to enter the PIN code.
EN 59
English
Custom
To enter the encryption key (the security
key) manually, select [Custom] and press
OK. If you have WPA security on your
router, enter the passphrase with the
remote control.
To access the on-screen keyboard, select the
text entry field and press OK. If you have
WEP security encryption, the TV asks for the
WEP encryption key in hexadecimal
numbers.
Find this hexadecimal key in the router
software on your PC. Write down the first
key of the WEP keys list, then enter it on the
TV with the remote control.
If the security key is accepted, the TV is
connected with the wireless router.
If asked, agree to the End User License
Agreement.
Wi-Fi MediaConnect
What you can do
Wi-Fi MediaConnect is only available for PC.
With Wi-Fi MediaConnect*, you can project
your PC screen on the TV wirelessly. You
can download the software for free. Read
the following pages for details.
*The Wi-Fi MediaConnect CD-ROM is
supplied with the wireless USB adapter,
PTA01 (sold separately).
For the PFL7666 and PDL7906 series, refer
to the Quick Start Guide for the installation
code.
What you need
To use Wi-Fi MediaConnect, you need the
following:
Connect the TV to your home network
A wireless router
A wireless USB adapter - PTA01 (For
non-Wi-fi integrated TVs only).
For the availability of the wireless USB
adapter, check with your local retailers or
buy online at www.philips.com/tv.
Install Wi-Fi MediaConnect (with CD-
ROM)
1. Insert the Wi-Fi MediaConnect CD-ROM
in your PC.
2. Your PC starts the Internet browser and
opens the Wi-Fi MediaConnect download
page - www.philips.com/wifimediaconnect.
On the website, you can check the
necessary PC system requirements.
3. Enter the code printed on the CD-ROM
envelope.
4. Click the 'Download now' button to
download the free Wi-Fi MediaConnect
software.
5. Once downloaded, start the file 'Wi-Fi
MediaConnect_setup.exe'. Follow the
instructions on your PC.
Install Wi-Fi MediaConnect
1. Start the Internet browser on your PC
and go to the Wi-Fi MediaConnect
download page -
http://www.philips.com/wifimediaconnect.
On the website, you can check the
necessary PC system requirements.
2. When prompted, enter the code printed
in the Quick Start Guide.
3. Click on the 'Download now' button to
download the free Wi-Fi MediaConnect
software.
4. Once the download is complete, start the
file 'Wi-Fi MediaConnect_setup.exe'.
Follow the instructions on your PC.
TV network name
If you have more than one TV in your home
network, you can rename this TV. To
rename this TV in the network, press >
[Setup] > [Network settings] and select the
TV network name.
To enter the name, press OK to open the
on-screen keyboard or use the remote
control keypad.
Start projecting
To start projecting the PC screen on the TV,
click on the small TV-like icon in the taskbar
at the bottom right of the PC screen. Your
PC screen appears on your TV screen.
EN 60
Stop projecting
To stop projecting, click on the TV icon
again.
Project your PC: Help
To read the Wi-Fi MediaConnect Help,
right-click the program icon in the
notification tray of the PC and select Help.
Notes
You can project high-definition (HD) or
standard-definition (SD) video, depending on
the processing power of your PC.
Due to content protection, certain
commercial DVD or Blu-ray discs may
not be projected.
The TV shows PC media files with a
small delay.
Wi-Fi MediaConnect is available for PC
only.
Project your PC: PC requirements
Minimum specifications
Windows XP, Vista, Windows 7 (PC
only)
Intel Pentium Core 2 Duo 1.8 GHz
512 MB RAM
200 MB free hard disk space
Wi-Fi 802.11g
Internet connection
Project your PC: PC requirements
Recommended specifications
Windows XP, Vista, Windows 7 (PC
only)
Intel Pentium Core 2 Duo 2.1 GHz
1 GB RAM
200 MB free hard disk space
Wi-Fi 802.11n
Internet connection
Common interface
What you can do
To watch some digital TV programmes, you
need a Conditional Access Module (CAM).
If a CAM is inserted and subscription fees
are paid, you can watch the channel. The
applications, functions, the content and the
onscreen messages vary for each CAM
service.
What you need
Caution: To protect the CAM from damage,
insert the CAM according to these
instructions.
Notes:
This TV supports CI as well as CI+. CI+
allows service providers to offer
premium HD digital programmes with a
high level of copy protection.
Refer to the documentation from your
service operator on how to insert a
smart card into the Conditional Access
Module.
1. Switch off the TV.
2. Follow the directions printed on the CAM
and insert the CAM into the Common
Interface at the side of the TV.
3. Push the CAM in as far as it will go, then
wait for the CAM to be activated. This takes
a few minutes.
To prevent digital services from being
deactivated, do not remove the CAM from
the slot when it is in use.
EN 61
English
Watch CAM services
1. After inserting and activating the CAM,
press OPTIONS.
2. Select [Common interface], then press
OK.
3. Select the CAM provider and press OK.
EN 62
6 Troubleshooting
Contact Philips
Warning: Do not attempt to repair the TV
yourself. This may cause severe injury,
irreparable damage to your TV or void
your warranty.
If you cannot resolve your problem, refer to
the frequently asked questions (FAQs) for
this TV at www.philips.com/support.
You can also contact Philips Consumer Care
in your country for support. You can find the
contact number in the leaflet that
accompanies the TV.
Take a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
General TV
The TV does not switch on:
Disconnect the power cable from the
power outlet. Wait for one minute
then reconnect it.
Make sure that the power cable is
securely connected.
Make sure that the power switch at the
base or back of the TV is switched on.
The TV does not respond to remote
control or front controls when switched
on
The TV requires some time to start up.
During this time, the TV does not respond
to the remote control or front controls. This
is normal behavior.
The standby light on the TV blinks red:
Disconnect the power cable from the power
outlet. Wait until the TV cools down before
you reconnect the power cable. If the
blinking reoccurs, contact Philips Consumer
Care.
You forgot the code to unlock the child
lock feature:
Enter ‘8888’.
The TV menu is in the wrong language:
Change the TV menu to your preferred
language.
For more information, see Set up your TV >
Menu language (Page 42).
When you are turning the TV on, off or to
standby, you hear a creaking sound from
the TV chassis:
No action is required. The creaking sound is
due to the normal expansion and
contraction of the TV as it cools and warms
up. This does not affect performance.
When the TV is in standby, a startup splash
screen is displayed, then returns to standby
mode:
This is normal behavior. When the TV is
disconnected and reconnected to the power
supply, the startup screen is displayed at the
next startup.
To switch on the TV from standby, press
on the remote control or press any key on
the front of the TV.
TV channel
Previously installed channels do not appear
in the channel list:
Make sure that the correct channel list is
selected.
No digital channels were found during the
installation:
Make sure that the TV supports DVB-T,
DVB-C or DVB-S in your country.
Make sure that the antenna is properly
connected and the correct network is
selected.
EN 63
English
Picture
The TV is on, but there is no picture or the
picture is distorted:
Make sure that the antenna is properly
connected to the TV.
Make sure that the correct device is
selected as the display source.
Make sure that the external device or
source is properly connected.
There is sound but no picture:
Make sure that the picture settings are set
correctly.
There is poor TV reception from an
antenna connection:
Make sure that the antenna is properly
connected to the TV.
Loud speakers, unearthed audio
devices, neon lights, high buildings and
other large objects can influence
reception quality. If possible, try to
improve the reception quality by
changing the antenna direction or
moving devices away from the TV.
If reception on only one channel is
poor, fine-tune this channel.
There is poor picture quality from
connected devices:
Make sure that the devices are
connected properly.
Make sure that the picture settings are
set correctly.
The TV did not save your picture settings:
Make sure that the TV location is set to
Home. You can change and save settings in
this mode.
The picture does not fit the screen; it is
too big or too small:
Try a different picture format.
The picture position is incorrect:
Picture signals from some devices may not fit
the screen correctly. Check the signal output
of the device.
The picture from broadcasts is scrambled:
You may need a Conditional Access Module
to access content. Check with your service
operator.
An "e-sticker" banner displaying
information appears on the TV display:
The TV is in [Shop] mode. To remove the
e-sticker, set the TV to [Home] mode, then
restart the TV. Position the TV > Location
(Page 10).
The computer display on the TV is not
stable:
Make sure that your PC uses the
supported resolution and refresh rate.
See Product specifications > Display
resolutions (Page 65).
Set the TV picture format to
[Unscaled].
Sound
There is a picture but sound quality is
poor:
If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
Make sure that all cables are properly
connected.
Make sure that the volume is not
muted or set to zero.
Make sure that the TV speakers setting
is selected. Press ADJUST, select
[Speakers], and then select TV.
Make sure that the TV audio output is
connected to the audio input on the
HDMI-CEC enabled or EasyLink
compliant home theatre device. Sound
should be heard from the home theatre
speakers.
There is a picture but the sound quality is
poor:
Make sure that the sound settings are
correctly set.
There is a picture but sound comes from
one speaker only:
Make sure that sound balance is set to the
centre.
EN 64
HDMI
There are problems with HDMI devices:
Note that HDCP (High-bandwidth
Digital Content Protection) support can
delay the time taken for a TV to display
content from a HDMI device.
If the TV does not recognise the HDMI
device and no picture is displayed,
switch the source from one device to
another and back again.
If there are intermittent sound
disruptions, make sure that output
settings from the HDMI device are
correct.
If you use an HDMI-to-DVI adapter or
HDMI to DVI cable, make sure that an
additional audio cable is connected to
AUDIO L/R or AUDIO IN (mini-jack
only).
You cannot use EasyLink features:
Make sure that your HDMI devices are
HDMI-CEC compatible. EasyLink features
only work with devices that are HDMI-CEC
compatible.
If an HDMI-CEC compliant audio device is
connected to the TV and the TV does not
display any mute or volume icon when the
volume is muted, increased or decreased.
This behaviour is normal when an HDMI-
CEC audio device is connected.
USB
USB device content is not displayed:
Make sure that the USB storage device
is set to Mass Storage Class compliant,
as described in the storage device's
documentation.
Make sure that the USB storage device
is compatible with the TV.
Make sure that the audio and picture
file formats are supported by the TV.
Audio and picture files do not play or
display smoothly:
The transfer performance of the USB
storage device may limit the data transfer
rate to the TV which causes poor playback.
Network
Net TV does not work
If the connection to the router is properly
set up, check the router connection to the
Internet.
Browse PC or Net TV access is slow.
Refer to your router's user manual for
information on transfer rate and other
factors of signal quality.
You need a high-speed Internet connection
for your router.
Wireless network is distorted or not
found.
Make sure that the wireless network is
not disturbed by microwave ovens,
DECT phones or other neighbouring
Wi-Fi devices.
If the wireless network is not working,
try a wired network connection.
For DLNA connection, click on How
does sharing change firewall settings in
the Media Sharing window for the Help
file.
EN 65
English
7 Product
specifications
Power and reception
Product specifications are subject to change
without notice.
Power
Mains power : AC 220-240 V~, 50/60
Hz
Standby power consumption : <0.15 W
Ambient temperature: 5 to 40 degrees
Celsius
For power consumption, see the
product specifications at
www.philips.com/support.
The power rating stated on the product
typeplate is the power consumption for this
product during normal household use (IEC
62087 Ed.2). The maximum power rating,
stated between brackets, is used for
electrical safety (IEC 60065 Ed. 7.2).
Reception
Antenna input: 75 ohm coaxial (IEC75)
TV system: DVB COFDM 2K/8 K,
Video playback: NTSC, PAL, SECAM
Digital TV: MPEG-4, DVB-T
(Terrestrial), *DVB-T2, DVB-C (Cable),
*DVB-S/S2 (Satellite).
Tuner bands: VHF, UHF, S-Channel,
Hyperband
*Available on certain models only.
Display and sound
Picture/Display
Display type: edge LED backlight
Diagonal size:
- 81 cm/32 inch
- 94 cm/37 inch
- 107 cm/42 inch
- 119 cm / 47 inch
- 140 cm / 55 inch
Aspect ratio: 16:9 (widescreen)
Panel resolution: 1920x1080p
Picture enhancement: Pixel Precise HD
Perfect Motion Rate (PMR):
- For PFL7x06 series: 400Hz
- For PFL7xx6 series: 600Hz
Picture/Display
HD Natural Motion - For PFL7x06
series, PFL7466 series and PFL7666
series
Perfect Natural Motion - For PFL7xx6
series
Ambilight: Ambilight Spectra 2
3D: 3D TV (PFL76x6 series only)
Sound
Output power (RMS):
- For PFL7x06 series: 24 W
- For PFL7xx6 series: 28 W
Incredible Surround
Clear Sound
Dynamic Bass Enhancement
Mono / Stereo / NICAM
Display resolutions
Computer formats - HDMI
(Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1600 x 1200 - 60 Hz
1920 x 1080 - 60 Hz
Computer formats - VGA
(Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1600 x 1200 - 60 Hz
1920 x 1080 - 60 Hz
EN 66
Video formats
(Resolution - refresh rate)
480i - 60 Hz
480p - 60 Hz
576i - 50 Hz
576p - 50 Hz
720p - 50Hz, 60 Hz
1080i - 50Hz, 60 Hz
1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz
Multimedia
Supported multimedia connections
USB : NTFS, FAT 16, FAT 32. Connect
only USB devices which consume
500mA of power or less.
SD card (Videostore)
Ethernet LAN RJ-45
Supported image files
JPEG (*.jpg)
Supported audio/video files
Multimedia file names must not exceed 128 characters.
Supported DLNA-compliant media server
software
Windows Media Player (for Microsoft
Windows)
Twonky Media (for Microsoft Windows
and Mac OS X)
Sony Vaio Media Server (for Microsoft
Windows)
TVersity (for Microsoft Windows)
Nero MediaHome
DiXiM (for Microsoft Windows XP)
Macrovision Network Media Server (for
Microsoft Windows)
Fuppes (for Linux)
uShare (for Linux)
Connectivity
Rear
EXT 1: SCART (RGB/CVBS)
Component and Audio: Y Pb Pr, Audio
L/R
EN 67
English
Service port: SERV.U
Headphones: stereo 3.5mm mini-jack
SAT: F-pin (Satellite). Available on
certain models only.
Bottom
Ethernet LAN RJ-45
DIGITAL AUDIO OUT: Optical
HDMI 1 - 3
AUDIO IN: DVI/VGA (stereo 3.5mm
mini-jack)
Antenna: 75 ohm coaxial
VGA: PC input
Side
Common Interface: CI
SD card (Video stores)
2 x USB
HDMI
HDMI features
Audio Return Channel (HDMI 1 only)
3D
Dimensions
Note: Dimensions and weights are
approximate values only. Design and
specifications are subject to change without
notice.
Legend for TV dimensions
The legends used to indicate the TV
dimensions are as follows:
( ) : 81 cm / 32 inch TV
{ } : 94-cm/37-inch TV
[ ] : 107-cm/42-inch TV
(( )) : 119 cm / 47 inch TV
{{ }} : 140 cm / 55 inch TV
Take a note of the legend that corresponds
to your TV. Then, go to the next page to
view the dimensions.
Use your TV legend to note the weight of the TV without the stand.
Use your TV legend to note the weight of the TV with stand.
EN 68
Use your TV legend to note the dimensions of your TV (with and without the stand).
Use your TV legend to note the thickness of your TV (with and without the stand).
Help version
UMv 3139 137 04523 - 20120305
EN 69
English
8 Index
3
3D - 18
3D glasses - 8
3D, health warning - 7
A
age rating - 34
analogue channels, fine-tune - 41
analogue channels, subtitles - 34
audio language - 39
C
CAM, enable - 61
CAM, insert - 60
CAM, see Conditional Access Module - 60
care - 7
channel list - 16
channels, favourites - 16
channels, fine-tune (analogue) - 41
channels, install (automatic) - 40
channels, install (manual) - 40
channels, reinstall - 41
channels, rename - 39
channels, reorder - 39
channels, switch - 15
channels, update - 40
child lock - 33
clock - 33
common interface - 60
computer, play files - 22
computer, see PC - 55
Conditional Access Module - 60
connect device - 47
connect, PC - 54
connect, USB - 18
connectors - 4
contact information, on Internet - 10
contact Philips - 11
controls - 12
D
demo - 43
devices, add - 17
devices, watch - 17
digital channels - 41
digital channels, subtitles - 34
digital radio - 16
dimensions - 67
display - 65
display resolution - 65
DLNA - 21
E
EasyLink, controls - 36
EasyLink, enable - 35
EasyLink, features - 35
EasyLink, RC key forward - 35
EasyLink, TV speakers - 36
Electronic Programme Guide - 16
end of use - 8
environment efforts - 8
environment, recycle - 8
EPG, Electronic Programme Guide - 16
EPG, menu - 16
F
factory settings - 39
favourites list, add - 16
G
games - 25
EN 70
H
HbbTV - 31
HbbTV, block reception - 31
HDMI - 46
HDMI ARC - 46
hearing impaired - 42
help, onscreen - 10
high-definition (HD), content - 5
home menu - 3
home mode - 10
I
install channels - 40
install channels (automatic) - 40
install channels (manual) - 40
K
kensington lock - 10
L
language, menu - 42
location, home or shop - 10
M
media server software (Mac) - 22
media server software (PC) - 21
multimedia - 66
multimedia, play files - 18
mute TV speakers - 36
N
Net TV, browse - 22
network, connect - 55
P
Pause TV - 27
PC, connect - 54
PC, display resolutions - 65
picture format - 38
picture settings - 38
Pixel Plus link - 37
placement, stand or wall mount - 9
position the TV - 9
power - 65
R
recording, TV shows - 28
recordings, manage - 30
recycle - 8
register product - 10
reinstall TV - 45
remote control - 12
remote control, batteries - 13
remote control, onscreen - 36
remote control, overview - 12
rename channels - 39
reorder channels - 39
S
safety - 6
Scenea, enable - 34
Scenea, see screen saver - 34
screen saver - 34
settings, assistant - 38
settings, picture - 38
settings, sound - 38
shop mode - 10
sleeptimer - 33
smart picture - 16
smart sound - 38
software, Internet update - 43
software, version - 43
sound settings - 38
subtitle, analogue - 34
subtitle, digital - 34
EN 71
English
subtitle, language - 34
switch TV on, off - 14
T
teletext 2.5 - 32
teletext, digital text - 32
teletext, dual screen - 32
teletext, enlarge - 32
teletext, language - 32
teletext, search - 32
teletext, subpages - 32
two-player games - 26
U
universal access, enable - 42
universal access, hearing impaired - 42
universal access, visually impaired - 43
USB keyboard - 54
USB mouse - 54
V
visually impaired - 43
volume - 12
W
wall mount - 9
wallpaper - 34
Wi-Fi MediaConnect - 59
wireless connection - 58
Wireless LAN ready - 57
© 2012 TP Vision Netherlands B.V.
All rights reserved.
Document order number 313913704523_edited