Table of Contents
- Contents
- 1 - Get Support
- 2 - Software
- 3 - Quick Guide
- 4 - Setting Up
- 5 - Connections
- 5.1 - Connectivity guide
- 5.2 - Antenna (4022, 4032, 4132, 4232 series)
- 5.3 - Antenna (4112 series)
- 5.4 - Satellite for 4022, 4032, 4132, 4232 series (if available)
- 5.5 - Satellite for 4112 series (if available)
- 5.6 - Video Device (4022, 4032, 4132, 4232 series)
- 5.7 - Video Device (4112 series)
- 5.8 - Audio Device (4022, 4032, 4132, 4232 series)
- 5.9 - Audio Device (4112 series)
- 5.10 - Computer
- 5.11 - CAM with Smart Card - CI+
- 5.12 - USB Device (4022, 4032, 4132, 4232 series)
- 5.13 - USB Device (4112 series)
- 5.14 - Network for Freeview (for xxPxT4xx2/05 series TV)
- 6 - Switch Source
- 7 - Channels
- 8 - TV Guide
- 9 - Recording and Pause TV
- 10 - Videos, Photos and Music
- 11 - Open TV Setting Menus
- 12 - Environmental
- 13 - Specifications
- 14 - Troubleshooting
- 15 - Safety and Care
- 16 - Copyrights
- 17 - Open Source
- Index
Philips 39PHT4112/12 User Manual
Displayed below is the user manual for 39PHT4112/12 by Philips which is a product in the TVs category. This manual has pages.
Related Manuals
Register your product and get support at 4112 series
www.philips.com/welcome
User Manual
32PHS4112
32PHT4112
39PHS4112
39PHT4112
43PFS4112
43PFT4112
Contents
1 Get Support 3
1.1 Identify and Register your TV 3
1.2 TV Help and User Manual 3
1.3 On-line Help and User Manual 3
1.4 Consumer Care / Repair 3
2 Software 4
2.1 Update Software 4
2.2 Software Version 4
3 Quick Guide 5
3.1 Remote Control 5
3.2 IR sensor 6
3.3 Joysticker - Local Control (if available) 6
4 Setting Up 8
4.1 Read Safety 8
4.2 TV Placement 8
4.3 Turn on TV 10
5 Connections 12
5.1 Connectivity guide 12
5.2 Antenna (4022, 4032, 4132, 4232 series) 12
5.3 Antenna (4112 series) 12
5.4 Satellite for 4022, 4032, 4132, 4232 series (if
available) 13
5.5 Satellite for 4112 series (if available) 13
5.6 Video Device (4022, 4032, 4132, 4232 series)
14
5.7 Video Device (4112 series) 16
5.8 Audio Device (4022, 4032, 4132, 4232 series)
17
5.9 Audio Device (4112 series) 18
5.10 Computer 19
5.11 CAM with Smart Card - CI+ 20
5.12 USB Device (4022, 4032, 4132, 4232 series) 21
5.13 USB Device (4112 series) 22
5.14 Network for Freeview (for xxPxT4xx2/05 series TV)
23
6 Switch Source 25
6.1 Source List 25
6.2 Rename Device 25
7 Channels 26
7.1 About Channels and Switch Channels 26
7.2 Install Channel 26
7.3 Channel List 31
7.4 Favourite Channels 32
8 TV Guide 34
8.1 What You Need 34
8.2 Using the TV Guide 34
9 Recording and Pause TV 36
9.1 What You Need 36
9.2 Recording 36
9.3 Pause TV 37
10 Videos, Photos and Music 38
10.1 From a USB Connection 38
10.2 Photos 38
10.3 Videos 38
10.4 Music 39
11 Open TV Setting Menus 40
11.1 Home Menu Overview 40
11.2 Utilities Menu 40
11.3 Quick Settings and All Settings 40
11.4 All Settings 40
12 Environmental 47
12.1 European Energy Label 47
12.2 Product Fiche 47
12.3 End of Use 48
13 Specifications 50
13.1 Power (For 4022, 4032, 4112, 4132 Series) 50
13.2 Power (For 4232 Series) 50
13.3 Reception 50
13.4 Display Resolution 50
13.5 Display Input Resolution 51
13.6 Sound 51
13.7 Multimedia 52
13.8 Connectivity 52
14 Troubleshooting 54
14.1 Tips 54
14.2 Switch On 54
14.3 Remote Control 54
14.4 Channels 54
14.5 Picture 55
14.6 Sound 55
14.7 HDMI 55
14.8 USB 56
15 Safety and Care 57
15.1 Safety 57
15.2 Screen Care 58
15.3 Terms of Use 58
16 Copyrights 60
16.1 HDMI 60
16.2 Dolby Audio 60
16.3 DTS 2.0 + Digital Out ™ 60
16.4 Other Trademarks 60
17 Open Source 61
17.1 Open Source Software 61
17.2 Open Source License 61
Index 64
2
1
Get Support
1.1
Identify and Register your TV
Identify your TV - TV model number and serial
number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
Register your TV
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
Go to www.philips.com/welcome
1.2
TV Help and User Manual
Press Settings > Help
In Help menu, you can easily get software updated,
reset TV to default settings, and read user manual.
- Update software: Check available software updates.
- User manual: Read the user manual for TV
information.
- Troubleshooting: Find a solution for frequent ask
questions.
- Factory settings: Reset all settings to factory
settings.
- Reinstall TV: Reinstall and redo the complete TV
installation.
- Contact info: Show the telephone number or web
address for your country or region.
1.3
On-line Help and User
Manual
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support.
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
For more TV troubleshooting and frequently asked
questions (FAQs)...
Go
to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant
Help page from your computer.
To download the Help (user manual) go
to www.philips.com/support
1.4
Consumer Care / Repair
For support and repair, call the Consumer Care
hotline in your country. Our service engineers will take
care of a repair, if necessary.
Find the telephone number in the printed
documentation that came with the TV.
Or consult our
website www.philips.com/support and select your
country if needed.
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irrepairable damage to your TV or
void your warranty.
3
2
Software
2.1
Update Software
Search for Updates
(Home) > Settings > Update
software > Search for updates.
You need a computer and a USB memory device to
upload the software on the TV. Use a USB memory
device with 256MB free space. Make sure that write
protection is switched off.
1. Start the update on TV
- (Home) > Settings > Update
software > Search for updates.
2. Identify the TV
- Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
3. Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file update.htm and double click it.
- Click on Send ID.
- Select your region
- If new software is available, download the .zip file.
After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
Do not place this file in a folder.
4. Update the TV software
- Insert the USB memory into the TV again. The
update starts automatically.
The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
- use the remote control
- remove the USB memory device from the TV
If a power cut occurs during the update, never
remove the USB memory device from the TV. When
the power returns, the update will continue.
Local Updates
For dealers and expert users…
(Home) > Settings > Update software > Local
updates.
Look for OAD updates (Over-the-air
Download)
Scan to search for an Over-the-air software update.
(Home) > Settings > Update software > Look
for OAD updates.
* The availability of OAD updates is dependent on
your country.
2.2
Software Version
To view the current TV software version…
(Home) > Settings > Update
software > Current software Info
4
3
Quick Guide
3.1
Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the back of the remote control.
1. Slide the battery door in the direction shown by the
arrow.
2. Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3. Reposition the battery door and slide it back until it
clicks.
- Remove the batteries if you are not using the
remote control for a long time.
- Safely dispose of your old batteries according to the
end of use directions.
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
Key Overview
Top
1. Standby / On
To switch the TV on or back to Standby.
2. Playback keys
- Play , to playback
- Pause , to pause playback
- Stop , to stop playback
- Rewind , to rewind
- Fast forward , to go fast forward
- Record , to record now
3. TV GUIDE
To open or close the TV Guide.
4. FORMAT
To open or close the Picture format menu.
5. SETUP
To open the Settings menu.
Middle
1. HOME
To open or close the home menu.
2. SOURCES
To open or close the Sources menu - the list of
connected devices.
3. Colour keys
The buttons function follow the on-screen
instructions.
4. INFO
To open or close programme infomation.
5
5. BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
6. EXIT
To switch back to watching TV.
7. OPTIONS
To open or close the Options menu.
8. OK key
To confirm a selection or setting.
9. Arrow / navigation keys
To navigate up, down, left or right.
10. LIST
To open or close the channel list.
Bottom
1. Mute
To mute the sound or to restore it.
2. Volume
To adjust the volume level.
3. Number keys
To select a TV channel directly.
4. SUBTITLE
To switch subtitles on, off or Automatic.
5. Channel
To switch to the next or previous channel in the
channel list. To open the next or previous page in
Text/Teletext. To start the next or previous chapter on
a disc.
6. TEXT
To open or close Text / Teletext.
3.2
IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
3.3
Joysticker - Local Control (if
available)
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…
1. With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2. Press left or right to
select Volume, Channel or Sources.
Press up or down to adjust the volume or tune to the
next or previous channel. Press up or down to go
6
through the list of sources, including the tuner
selection.
The menu will disappear automatically.
7
4
Setting Up
4.1
Read Safety
Read the safety instructions first before you use the
TV.
To read the instructions, in User manual, see
chapter Safety and Care.
4.2
TV Placement
Tips on Placement
- Position the TV where light does not shine directly
on the screen.
- Position the TV up to 15 cm away from the wall.
- The ideal distance to watch TV is 3 times its
diagonal screen size. When seated, your eyes should
be level with the centre of the screen.
TV Stand
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
In case you lost this guide, you can download it
from www.philips.com.
Use the model number of the TV to look for
the Quick Start Guide to download.
Wall Mounting
4022 series TV
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
- 22Pxx4022 - VESA MIS-F 75x75, M4 (Minimum 10
mm, Maximum 10.5 mm)
- 24Pxx4022 - VESA MIS-F 75x75, M4 (Minimum 10
mm, Maximum 10.5 mm)
Preparation
First remove the 4 plastic screw caps out of the
threaded bushes on the back of the TV.
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
4032 series TV
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
- 24Pxx4032 - VESA MIS-F 75x75, M4 (Minimum 10
8
mm, Maximum 10.5 mm)
- 32Pxx4032 - VESA MIS-F 100x100, M4 (Minimum
10 mm, Maximum 14 mm)
Preparation
First remove the 4 plastic screw caps out of the
threaded bushes on the back of the TV.
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
4112 series TV - 43 inch
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
- 43Pxx4112 - VESA MIS-F 200x100, M6 (Minimum 9
mm, Maximum 10 mm)
Preparation
First remove the 4 plastic screw caps out of the
threaded bushes on the back of the TV.
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
4112 series TV - 32 inch, 39 inch
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
- 32Pxx4112 - VESA MIS-F 200, M4 (Minimum 10
mm, Maximum 14 mm)
- 39Pxx4112 - VESA MIS-F 200, M6 (Minimum 10
mm, Maximum 14 mm)
Preparation
First remove the 2 plastic screw caps out of the
threaded bushes on the back of the TV.
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
4132 series TV
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
- 32Pxx4132 - VESA MIS-F 100x100, M4 (Minimum
10 mm, Maximum 14 mm)
- 43Pxx4132 - VESA MIS-F 200x200, M6 (Minimum
9
10 mm, Maximum 15 mm)
- 49Pxx4132 - VESA MIS-F 400x200, M6 (Minimum
10 mm, Maximum 15 mm)
Preparation
First remove the 4 plastic screw caps out of the
threaded bushes on the back of the TV.
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
4232 series TV
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
- 22PFx4232 - VESA MIS-F 75x75, M4 (Minimum 10
mm, Maximum 10.5 mm)
Preparation
First remove the 4 plastic screw caps out of the
threaded bushes on the back of the TV.
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
4.3
Turn on TV
Connect Power Cable (4022, 4032,
4132 series)
- Insert the power cable into the POWER connector
on the back of the TV.
- Make sure the power cable is securely inserted in
the connector.
- Make sure that the power plug, in the wall socket, is
accessible at all times.
- When you unplug the power cable, always pull the
plug, never pull the cable.
For 32"/39"/43"/49"
For 22"/24"
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
10
Connect Power Cable (4112 series)
- Insert the power cable into the POWER connector
on the back of the TV.
- Make sure the power cable is securely inserted in
the connector.
- Make sure that the power plug, in the wall socket, is
accessible at all times.
- When you unplug the power cable, always pull the
plug, never pull the cable.
For 43"
For 32"/39"
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
Connect Power Cable (4232 series)
- Insert the power cable into the POWER connector
on the back of the TV.
- Make sure the power cable is securely inserted in
the connector.
- Make sure that the power plug, in the wall socket, is
accessible at all times.
- When you unplug the power cable, always pull the
plug, never pull the cable.
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
Switch On or Standby
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
Switch On
Press the power button on the side or the back of the
TV.
Switch to standby
To switch the TV to Standby, press on the remote
control.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
11
5
Connections
5.1
Connectivity guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The
guide offers information on how to connect and
which cables to use.
Go to www.connectivityguide.philips.com
5.2
Antenna (4022, 4032, 4132,
4232 series)
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
For 32"/39"/43"/49"
For 22"/24"
* Network port is only for xxPxTxxx2/05 series
** Satellite port is only for xxPxSxxx2 series
5.3
Antenna (4112 series)
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
12
input signals.
For 43"
For 32"/39"
5.4
Satellite for 4022, 4032, 4132,
4232 series (if available)
Attach the satellite F-type connector to the satellite
connection SAT at the back of the TV.
For 32"/39"/43"/49"
For 22"/24"
* Network port is only for xxPxTxxx2/05 series
5.5
Satellite for 4112 series (if
available)
Attach the satellite F-type connector to the satellite
connection SAT at the back of the TV.
For 43"
13
For 32"/39"
* Network port is only for xxPxTxxx2/05 series
5.6
Video Device (4022, 4032,
4132, 4232 series)
HDMI
For best signal quality transfer, use a High speed
HDMI cable and do not use an HDMI cable longer
than 5 m.
For 32"/39"/43"/49"
For 22"/24"
* Network port is only for xxPxTxxx2/05 series
** Satellite port is only for xxPxSxxx2 series
Copy protection
HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
Management).
14
HDMI - DVI
If you still own a device that only has a DVI
connection, you can connect the device to HDMI 2
connection with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use HDMI 2 connection and add
an Audio L/R cable (mini-jack 3.5mm) to Audio In for
sound, on the back of the TV.
For 32"/39"/43"/49"
For 22"/24"
* Network port is only for xxPxTxxx2/05 series
** Satellite port is only for xxPxSxxx2 series
HDMI-CEC Connection - EasyLink
Connect HDMI CEC-compatible devices to your TV,
you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched on on
the TV and the connected device.
Switch on EasyLink
(Home) > Settings > General
settings > EasyLink > EasyLink > On
Operate HDMI CEC-compatible devices with TV
remote control
(Home) > Settings > General
settings > EasyLink > EasyLink remote
control > On
Note:
- EasyLink might not work with devices from other
brands.
- The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink. Example HDMI CEC branding names are
property of their respective owners.
SCART
SCART is a good quality connection.
The SCART connection can be used for CVBS and
RGB video signals but cannot be used for High
Definition (HD) TV signals. The SCART connection
combines video and audio signals. The SCART
connection also supports NTSC playback.
15
5.7
Video Device (4112 series)
HDMI
For best signal quality transfer, use a High speed
HDMI cable and do not use an HDMI cable longer
than 5 m.
For 43"
For 32"/39"
* Network port is only for xxPxTxxx2/05 series
** Satellite port is only for xxPxSxxx2 series
Copy protection
HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
Management).
HDMI-CEC Connection - EasyLink
Connect HDMI CEC-compatible devices to your TV,
you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched on on
the TV and the connected device.
Switch on EasyLink
(Home) > Settings > General
settings > EasyLink > EasyLink > On
Operate HDMI CEC-compatible devices with TV
remote control
(Home) > Settings > General
settings > EasyLink > EasyLink remote
control > On
16
Note:
- EasyLink might not work with devices from other
brands.
- The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink. Example HDMI CEC branding names are
property of their respective owners.
CVBS - Audio L R
Connect the device to the TV with a composite cable
(CVBS) and an audio L/R cable to the TV.
For 43"
For 32"/39"
5.8
Audio Device (4022, 4032,
4132, 4232 series)
HDMI ARC
Only HDMI 1 on the TV have HDMI ARC (Audio
Return Channel).
If the device, typically a Home Theatre System (HTS),
also has the HDMI ARC connection, connect it
to HDMI 1 connection on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
Digital Audio Out - Optical
Audio Out - Optical is a high quality sound
connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theatre System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.
For 32"/39"/43"/49"
For 22"/24"
17
* Network port is only for xxPxTxxx2/05 series
** Satellite port is only for xxPxSxxx2 series
Headphones
You can connect a set of headphones to
the connection on the side of the TV. The
connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
5.9
Audio Device (4112 series)
HDMI ARC
Only HDMI 1 on the TV have HDMI ARC (Audio
Return Channel).
If the device, typically a Home Theatre System (HTS),
also has the HDMI ARC connection, connect it
to HDMI 1 connection on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
Digital Audio Out - Optical
Audio Out - Optical is a high quality sound
connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theatre System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.
For 43"
For 32"/39"
* Network port is only for xxPxTxxx2/05 series
** Satellite port is only for xxPxSxxx2 series
18
Headphones
You can connect a set of headphones to
the connection on the side or back of the TV. The
connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
For 43"
For 32"/39"
5.10
Computer
HDMI - DVI
If you still own a device that only has a DVI
connection, you can connect the device
to HDMI 2 connection with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use HDMI 2 connection and add
an Audio L/R cable (mini-jack 3.5mm) to Audio In for
sound, on the back of the TV.
For 32"/39"/43"/49"
For 22"/24"
* Network port is only for xxPxTxxx2/05 series
** Satellite port is only for xxPxSxxx2 series
VGA (if available)
Use a VGA cable if your device only has a VGA
connection. Use VGA connection and add an Audio
L/R cable (mini-jack 3.5mm) to Audio In for sound, on
the back of the TV.
For 22"/24"
19
* Network port is only for xxPxTxxx2/05 series
** Satellite port is only for xxPxSxxx2 series
Ideal Settings
(Home) > Settings > Picture >
Advanced > Computer
Set to On to have the ideal picture setting for use
your TV as a computer monitor.
* Only available for HDMI and VGA sources.
5.11
CAM with Smart Card - CI+
About CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV operators
in your region. These programmes are scrambled by
the TV operator and descrambled with a prepaid CI+
module.
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to
their premium programmes. These programmes have
a high level of copy protection.
Contact a digital TV operator for more information on
terms & conditions.
Smart Card (4022, 4032, 4132, 4232
series)
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to
their premium programmes.
Insert the smart card into the CAM module. See the
instruction you received from the operator.
To insert the CAM in the TV…
1. Look on the CAM for the correct method of
insertion. Incorrect insertion can damage the CAM
and TV.
2. While looking at the back of the TV, with the front
of the CAM facing towards you, gently insert the CAM
into the slot COMMON INTERFACE.
3. Push the CAM in as far as it will go. Leave it in the
slot permanently.
When you switch on the TV, it may take a few minutes
before the CAM is activated. If a CAM is inserted and
subscription fees are paid (subscription methods can
differ), you can watch the scrambled channels
supported by the CAM smart card.
The CAM and smart card are exclusively for your TV. If
you remove the CAM, you will no longer be able to
watch the scrambled channels supported by the
CAM.
20
Smart Card (4112 series)
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to
their premium programmes.
Insert the smart card into the CAM module. See the
instruction you received from the operator.
To insert the CAM in the TV…
1. Look on the CAM for the correct method of
insertion. Incorrect insertion can damage the CAM
and TV.
2. While looking at the back of the TV, with the front
of the CAM facing towards you, gently insert the CAM
into the slot COMMON INTERFACE.
3. Push the CAM in as far as it will go. Leave it in the
slot permanently.
When you switch on the TV, it may take a few minutes
before the CAM is activated. If a CAM is inserted and
subscription fees are paid (subscription methods can
differ), you can watch the scrambled channels
supported by the CAM smart card.
The CAM and smart card are exclusively for your TV. If
you remove the CAM, you will no longer be able to
watch the scrambled channels supported by the
CAM.
For 43"
For 32"/39"
Watch Channel on Smart Card
You can watch channels which are installed from
CI/CAM cards.
1. While watching a TV channel, press LIST to
open the channel list.
2. Select: CI+ Channel list .
Set Passwords and PIN Codes
For some CAMs, you must enter a PIN code to watch
its channels. When you set the PIN code for the CAM,
we recommend you to use the same code you are
using to unlock the TV.
To set the PIN code for the CAM…
(Home) > Settings > Child lock > CAM PIN
5.12
USB Device (4022, 4032,
4132, 4232 series)
USB Flash Drive
You can view photos or play your music and videos
from a connected USB flash drive. Insert a USB flash
drive in the USB connection on the TV while the TV
is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press SOURCES and select USB.
USB Hard Drive
If you connect a USB Hard Drive, you can pause or
record digital TV broadcasts (DVB broadcasts or
similar).
Minimum Disk Space
- To pause a broadcast, you need a USB compatible
Hard Drive with a minimum of 4GB disk space.
- To pause and record a broadcast, you need a
21
minimum of 32GB disk space.
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
To Pause
To pause a broadcast, you need a USB compatible
Hard Drive with a minimum of 4GB disk space.
To Record
To pause and record a broadcast, you need a
minimum of 32GB disk space.
1. Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2. Switch on the USB Hard Drive and the TV.
3. When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
5.13
USB Device (4112 series)
USB Flash Drive
You can view photos or play your music and videos
from a connected USB flash drive. Insert a USB flash
drive in the USB connection on the TV while the TV
is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press SOURCES and select USB.
For 43"
For 32"/39"
USB Hard Drive
If you connect a USB Hard Drive, you can pause or
record digital TV broadcasts (DVB broadcasts or
similar).
Minimum Disk Space
- To pause a broadcast, you need a USB compatible
Hard Drive with a minimum of 4GB disk space.
- To pause and record a broadcast, you need a
minimum of 32GB disk space.
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
To Pause
To pause a broadcast, you need a USB compatible
Hard Drive with a minimum of 4GB disk space.
22
To Record
To pause and record a broadcast, you need a
minimum of 32GB disk space.
1. Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2. Switch on the USB Hard Drive and the TV.
3. When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
For 43"
For 32"/39"
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
5.14
Network for Freeview (for
xxPxT4xx2/05 series TV)
Network
About Network
Network port and function is for Freeview HD
streaming features only.
Connect to Network (4022, 4032, 4132, 4232 series)
To connect the TV to the Internet, you need a
network router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
Make the connection
To make a wired connection…
1. Connect the router to the TV with a network cable
(Ethernet cable**).
2. Make sure that the router is switched on.
3. Press (Home) , select Settings > Network and
press (right) to enter the menu.
4. Select Connect to network and press OK.
5. Select Wired and press OK. The TV constantly
searches for the network connection.
6. A message will be shown when the connection is
successful.
If the connection fails, you can check the DHCP
setting of the router. DHCP should be switched on.
23
Connect to Network (4112 series)
To connect the TV to the Internet, you need a
network router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
For 43"
For 32"/39"
Make the connection
To make a wired connection…
1. Connect the router to the TV with a network cable
(Ethernet cable**).
2. Make sure that the router is switched on.
3. Press (Home) , select Settings > Network and
press (right) to enter the menu.
4. Select Connect to network and press OK.
5. Select Wired and press OK. The TV constantly
searches for the network connection.
6. A message will be shown when the connection is
successful.
If the connection fails, you can check the DHCP
setting of the router. DHCP should be switched on.
Network Settings
(Home) > Settings > Network > View network
settings
You can view all current network settings here. The IP
and MAC address, signal strength, speed, encryption
method, etc.
(Home) > Settings > Network > Network
configuration
If you are an advanced user and want to install your
network with Static IP addressing, set the TV to Static
IP.
Select Static IP configuration and configure the
connection. You can set the number for IP
address, Netmask, Gateway, DNS 1, or DNS 2.
24
6
Switch Source
6.1
Source List
- To open the sources menu, press SOURCES .
- To switch to a connected device, select the device
with the arrows (up) or (down) and press OK.
- To close the Source menu without switching to a
device, press SOURCES again.
6.2
Rename Device
- Only HDMI, VGA (if available), SCART (if
available) sources can be renamed or replace device
icon
1. Press SOURCES , and select HDMI or VGA (if
available).
2. Press Edit and press OK.
3. Select one of the device icons and press OK, the
preset name appears in the typing field.
4. Select Rename, then enter new name using on-
screen keyboard.
- Press (red) key to enter with lower-case
- Press (green) key to enter with upper-case
- Press (yellow) key to enter number and
symbol
- Press (blue) key to delete a character
5. Select Done when complete the editing.
25
7
Channels
7.1
About Channels and Switch
Channels
To watch TV channels
- Press . The TV tunes to the TV channel you last
watched.
- Press (Home) > Channels and press OK.
- Press + or - to switch channels.
- If you know the channel number, type in the
number with the number keys. Press OK after you
entered the number to switch channels.
- To switch back to the previously tuned channel,
press BACK .
To switch to a channel from a channel list
- While watching a TV channel, press LIST to
open the channel lists.
- The channel list can have several pages with
channels. To view the next or previous page,
press + or -.
- To close the channel lists without switching
channels, press LIST again.
Channel icons
After an Automatic channel update of the channel list,
newly found channels are marked with a (star).
If you lock a channel, it will be marked with
a (lock).
Radio channels
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
This TV can receive digital television standard DVB. TV
may not work properly with some operators of digital
television , non-compliance with requirements of the
standard in full.
7.2
Install Channel
Antenna and Cable
Manually Search for Channels and Channel Settings
Search for Channels
Update existing channel list
(Home) > Settings > Antenna/cable
installlation > Search for channels > Update
channels
Re-install all channels
(Home) > Settings > Antenna/cable
installlation > Search for channels > Re-install
channels
1. Select the country where you are now and
press OK.
2. Select Antenna (DVB-T) or Cable (DVB-C) , and
select one item you need to re-install.
3. Select Digital and analogue channels, Only digital
channels, or Only analogue channels.
4. Select Start and press OK to update channels.
This can take a few minutes.
Channel Settings
(Home) > Settings > Antenna/cable
installlation > Search for channels > Re-install
channels
1. Select the country where you are now and
press OK.
2. Select Antenna (DVB-T) or Cable (DVB-C) , and
select one item you need to re-install.
3. Select Digital and analogue channels, Only digital
channels, or Only analogue channels.
4. Select Settings and press OK.
5. Press (red) to reset, or press (green) when
complete the settings.
Frequency scan
Select the method of searching for channels.
- Quick: select the faster method and use the
predefined settings used by most cable providers in
your country.
- Full: If this results in having no channels installed or
if some channels are missing, you can select the
extended Full method. This method will take more
time to search for and install channels.
- Advanced: If you received a specific network
frequency value to search for channels, select
Advanced.
Network frequency mode
If you intend to use the fast Quick method
in Frequency scan to search for channels,
select Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network frequency
With the Network frequency mode set to Manual,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
26
Symbol rate mode
If your cable provider did not give you a
specific symbol rate value to install the TV channels,
leave the Symbol rate mode setting on Automatic.
If you received a specific symbol rate value,
select Manual.
Symbol rate
With the Symbol rate mode set to Manual, you can
enter the symbol rate value by using the number
keys.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free
channels only .
Automatically Search for Channels
(Home) > Settings > Antenna/cable
installlation > Automatic channel update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
Channel Update Message
(Home) > Settings > Antenna/cable
installlation > Channel update message
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
Digital: Reception Test
(Home) > Settings > Antenna/cable
installlation > Digital: Reception test
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with and and change the number
with and . To check the frequency,
select Search and press OK.
If you use DVB-C to receive channels, the
option Symbol rate mode is available. For Symbol
rate mode, select Automatic, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, select Symbol rate, and
use the number keys or and .
Analogue: Manual Installation
(Home) > Settings > Antenna/cable
installlation > Analogue: Manual Installation
Analogue TV channels can be manually installed,
channel by channel.
System
To set up the TV system, select System.
Select your country or the part of the world where
you are now and press OK.
Search Channel
To find a channel, select Search channel and
press OK. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press OK, select Search and press OK to search
for a channel automatically. The found channel is
shown on screen and if the reception is poor,
press Search again. If you want to store the channel,
select Done and press OK.
Fine tune
To fine tune a channel, select Fine tune and
press OK. You can fine tune the channel
with or .
If you want to store the channel found,
select Done and press OK.
Store
You can store the channel on the current channel
number or as a new channel number.
Select Store and press OK. The new channel
number is shown briefly.
You can redo these steps until you have found all
available analogue TV channels.
27
Satellite (if available)
About Installing Satellites
Up to 4 Satellites
You can install up to 4 satellites (4 LNBs) on this TV.
Select the exact number of satellites you wish to
install at the start of the installation. This will speed up
the installation.
Unicable
You can use a Unicable system to connect the
antenna dish to the TV. You can select Unicable for 1
or for 2 satellites at the start of the installation.
MDU - Multi-Dwelling-Unit
The built-in satellite tuners support MDU on the Astra
satellites and for Digiturk on the Eutelsat satellite.
MDU on Türksat is not supported.
Start the Installation
Update Channels
(Home) > Settings > Satellite
installlation > Search for satellite > Update
channels
You can always start an channel update manually,
new channels will be added, and unavailable
channels will be removed.
Enter PIN code if necessary.
Re-install Channels
(Home) > Settings > Satellite
installlation > Search for satellite > Re-install
channels
You can search satellites and channels again
manually.
1. Select one option you need to re-install.
2. Select Settings or select Start to update channels.
Settings Menu
Press Reset to reset, or press Done when
complete the settings.
- Connection type
Select the number of satellites you want to install.
The TV sets the appropriate connection type
automatically.
• Up to 4 Satellites - You can install up to 4 satellites
(4 LNBs) on this TV. Select the exact number of
satellites you wish to install at the start of the
installation. This will speed up the installation.
• Unicable - You can use a Unicable system to
connect the antenna dish to the TV. You can select
Unicable for 1 or for 2 satellites at the start of the
installation.
- LNB settings
In some countries, you can adjust the expert settings
for homing transponder and each LNB. Only use or
change these settings when a normal installation fails.
If you have non-standard satellite equipment, you
can use these settings to overrule the standard
settings. Some providers might give you some
transponder or LNB valeus which you can enter here.
• LNB Power - By default, LNB Power is set to On.
• 22 kHz Tone - By default, the Tone is set to Auto.
• Low LO Frequency / High LO Frequency - The local
oscillator frequencies are set to standard values.
Adjust the values only in case of exceptional
equipment that needs different values.
Enter PIN code if necessary.
Add Satellite or Remove Satellite
(Home) > Settings > Satellite
installlation > Search for satellite > Add satellite
or Remove satellite
(Home) > Settings > Satellite
installlation > Search for satellite > Add satellite
• You can add an additional satellite to your current
satellite installation. The installed satellites and their
channels remain untouched. Some satellite operators
do not allow adding a satellite.
• The additional satellite should be seen as an extra, it
is not your main satellite subscription or not the main
satellite of which you use its channel package.
Typically, you would add a 4th satellite when you
have 3 satellites already installed. If you have 4
satellites installed, you might consider removing one
first to be able to add a new satellite.
• If you currently have only 1 or 2 satellites installed,
the current installation settings might not allow
adding an extra satellite. If you need to change the
installation settings, you must redo the complete
satellite installation. You cannot use Add satellite if
a change of settings is needed.
(Home) > Settings > Satellite
installlation > Search for satellite > Remove
satellite
You can remove one or more satellites from your
current satellite installation. You remove the satellite
and its channels. Some satellite operators do not
allow removing a satellite.
28
Satellite Channel List
(Home) > Settings > Satellite installlation >
Satellite channel list
You can select your preferred satellite channel list
when press LIST to open satellite channels.
Satellites can offer channel packages that bundle free
channels (free-to-air) and offer a sorting that suits a
country. Some satellites offer subscription packages -
a collection of channels you pay for.
Select From a sorted channel package to install the
channels of the package only or select All channel
unsorted to install the package and all other
available channels too. We recommend a Quick
installation for subscription packages. If you have
additional satellites that are not part of your
subscription package, we recommend a full
installation. All installed channels are put in the
channels list.
Automatically Search for Channels
(Home) > Settings > Satellite
installlation > Automatic channel update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
Channel Update Message
(Home) > Settings > Satellite
installlation > Channel update message
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
Manual Installation
(Home) > Settings > Satellite
installlation > Manual installtion
Manually install satellite.
- LNB - Select the LNB for which you want to add
new channels.
- Polarisation - Select the polarisation you need.
- Symbol rate mode - Select Manual to enter symbol
rate.
- Frequency - Enter the frequency for the
transponer.
- Search - Search for transponder.
Troubleshooting
The TV cannot find the satellites I want or the TV
installs the same satellite twice
- Make sure that the correct number of satellites is set
in Settings at the start of the installation. You can set
the TV to search for One, Two or 3/4 satellites.
A dual head LNB cannot find a second satellite
- If the TV finds one satellite but cannot find a second
one, turn the dish a few degrees. Align the dish to get
the strongest signal on the first satellite. Check the
signal strength indicator of the first satellite on screen.
With the first satellite set at the strongest signal, select
Search again to find the second satellite.
- Make sure the settings are set to Two Satellites.
Changing the installation settings did not solve my
problem
- All settings, satellites and channels are only stored
at the end of the installation when you finish.
All satellite channels are gone
- If you use a Unicable system, make sure you
assigned two unique user band numbers for both
built-in tuners in the Unicable settings. It might be
that another satellite receiver in your Unicable system
is using the same user band number.
Some satellite channels seem to have disappeared
from the channel list
- If some channels seem to be gone or displaced, the
broadcaster might have changed the transponder
location of these channels. To restore the channel
positions in the channel list, you can try an update of
the channel package.
I cannot remove a satellite
- Subscription packages do not allow removing a
satellite. To remove the satellite, you have to do a
complete installation again and select another
package.
Sometimes the reception is poor
- Check if the satellite dish is solidly mounted. Strong
winds can move the dish.
- Snow and rain can degrade the reception.
29
Channel List Copy
Introduction
Channel list copy is intended for dealers and expert
users.
With Channel list copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel list copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
- Both TVs are from the same year range. Check the
TV model name with the last number. (For example:
xxPxx4xx2, 2 stands for 2017 product)
- Both TVs have compatible software versions, check
the number:
Copy a Channel List, Check Channel List Version
To copy a channel list…
1. Switch on the TV. This TV should have channels
installed.
2. Plug in a USB flash drive.
3. Press (Home) > Settings > General
settings > Channel list copy.
4. Select Copy to USB and press OK. You might be
asked to enter the Child Lock PIN code to copy the
channel list.
5. When copying is done, unplug the USB flash drive.
6. Press (left) repeatedly if necessary, to close the
menu.
Now you can upload the copied channel list onto
another Philips TV.
Check the current version of the channel list...
1. Press (Home) > Settings > General
settings > Channel list copy.
2. Select Channel list copy and select Current
version, then press OK.
3. Press (left) repeatedly if necessary, to close the
menu.
Upload a Channel List
To not installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1. Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2. Plug in the USB flash drive that holds the channel
list of the other TV.
3. To start the channel list upload,
press (Home) > Settings > General settings
> Channel list copy > Copy to TV and press OK.
Enter your PIN code if necessary.
4. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1. Verify the country setting of the TV. (To verify this
setting, see chapter Re-install channels. Start this
procedure until you reach the country setting.
Press BACK to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. See chapter Re-install channels and
start the installation. Select the correct country and
skip the channels search. Finish the installation. When
done, continue with step 2.
2. Plug in the USB flash drive that holds the channel
list of the other TV.
3. To start the channel list upload,
press (Home) > Settings > General
settings > Channel list copy > Copy to TV and
press OK. Enter your PIN code if necessary.
4. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
Channel Options
Open Options
While watching a channel, you can set some options.
Depending on the type of channel you are watching
(analogue or digital) or depending on the TV settings
you made, some options are available.
To open the options menu…
30
1. While watching a channel, press OPTIONS.
2. Press OPTIONS again to close.
Subtitles
To switch on Subtitles, press SUBTITLE.
You can switch
subtitles Subtitle on or Subtitle off . Alternatively
you can select Automatic.
Automatic
If language information is part of the digital broadcast
and the broadcasted programme is not in your
language (the language set on TV), the TV can show
subtitles automatically in one of your preferred
subtitle languages. One of these subtitle languages
must also be part of the broadcast.
You can select your preferred subtitle languages
in Subtitle language.
Subtitles Language
If none of the preferred subtitle languages are
available, you can select another subtitle language if
available. If no subtitle languages are available, you
cannot select this option.
Audio Language
If none of the preferred audio languages are
available, you can select another audio language if
available. If no audio languages are available, you
cannot select this option.
Dual I-II
If an audio signal contains two audio languages but
one language or both has no language indication, this
option is available.
Common Interface
If prepaid premium content is available from a CAM,
you can set the provider settings with this option.
Mono / Stereo
You can switch the sound of an analogue channel to
Mono or Stereo.
To switch to Mono or Stereo…
1. Tune to an analoge channel.
2. Press OPTIONS, select Mono/Stereo and
press (right).
3. Select Mono or Stereo and press OK.
4. Press (left) repeatedly if necessary, to close the
menu.
Status
Select Status to view technical information on the
channel.
Clock
Display time on the corner of the TV screen.
7.3
Channel List
Open Channel List
To open the current channel list…
1. Press , to switch to TV.
2. Press LIST to open the current channel list.
3. Press OPTIONS > Select channel list, and
select one channel list you want to watch.
4. Press LIST again to close the channel list.
Channel List Options
Open Option Menu
To open the channel list option menu...
1. Press , to switch to TV.
2. Press LIST to open the current channel list.
3. Press OPTIONS , and select one of options.
4. Press LIST again to close the channel list.
Rename Channel
1. Press , to switch to TV.
2. Press LIST to open the current channel list.
3. Select one channel you want to rename.
4. Press OPTIONS > Rename channel, and press
OK.
5. In the typing field, press OK to open on-screen
keyboard, or select Hide to hide the on-screen
keyboard.
6. Use navigation keys to select a character, then
press OK.
- Press (red) key to enter with lower-case
- Press (green) key to enter with upper-case
- Press (yellow) key to enter number and
symbol
- Press (blue) key to delete a character
31
7. Select Done when complete the editing.
8. Press LIST again to close the channel list.
Select Channel Filter
LIST > OPTIONS > Select channel filter
Select one of channel combinations showing in the
channel list.
Create or Edit Favourites Channel List
LIST > OPTIONS > Create favourites list
Select a channel then press OK to add in a
favourites channel list, once completed,
press Done.
LIST > OPTIONS > Edit favourites
Select a channel then press OK to add in or remove
from a favourites channel list, once completed, press
Done.
Select Channel Range
LIST > OPTIONS > Select channel range
Select a range of channels in a favourites channel
list, once completed, press OK.
Select Channel List
LIST > OPTIONS > Select channel list
Select a range of channels in a favourites channel
list, once completed, press OK.
Lock, Unlock Channel
LIST > OPTIONS > Lock channel, Unlock
channel
To prevent children from watching a channel, you can
lock a channel. To watch a locked channel, you must
enter the 4 digit Child Lock PIN code first. You
cannot lock programmes from connected devices.
The locked channel will have next to the channel
logo.
Search Channels
LIST > OPTIONS > Search channel
You can search for a channel to find it in a long list of
channels.
1. Press , to switch to TV.
2. Press LIST to open the current channel list.
3. Press OPTIONS > Search channel, and
press OK.
In the typing field, press OK to open on-screen
keyboard, or press BACK to hide the on-screen
keyboard.
Use navigation keys to select a character, then
press OK.
- Press (red) key to enter with lower-case
- Press (green) key to enter with upper-case
- Press (yellow) key to enter number and
symbol
- Press (blue) key to delete a character
4. Select Done when complete the editing.
5. Press LIST again to close the channel list.
7.4
Favourite Channels
About Favourite Channels
You can create a favourite channel list that only holds
the channels you want to watch. With the Favourite
channel list selected, you will only see your favourite
channels when you switch through channels.
Create a Favourites List
1. While watching a TV channel, press LIST to
open the channel list.
2. Select the channel, and press Mark as
favourites to mark as favourite.
3. The selected channel is marked with a .
4. To finish, press BACK . The channels are added
to the Favourites list.
Remove Channel from the Favourites
List
To remove a channel from the favourites list, select
the channel with , then press Unmark as
favourite again to unmark as favourite.
32
Reorder Channels
You can reorder, reposition channels in the Favourite
channel list.
1. While watching a TV channel,
press LIST > OPTIONS > Select channel
list.
2. Select Antenna - Favourite channels , Cable -
Favourite channels or Satellite - Favourite channels*,
and press OK.
3. Select the channel to reorder and press OK.
4. Press the Navigation buttons to move the
highlighted channel to another location and
press OK.
5. Once completed, press OK.
* Satellite channel only can be searched
on xxPxSxxx2 TV models.
Text / Teletext
Text Pages
To open Text/Teletext press TEXT, while you are
watching TV channels.
To close Text, press TEXT again.
Select a Text page
To select a page . . .
1. Enter the page number with the number keys.
2. Use the arrow keys to navigate.
3. Press a colour key to select a colour-coded subject
at the bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press OPTIONS and select T.O.P. overview.
Text Options
In Text/Teletext, press OPTIONS to select the
following…
- Freeze page
To stop the automatic rotation of subpages.
- Dual screen / Full screen
To show the TV channel and Text alongside each
other.
- T.O.P. overview
To open T.O.P. Text.
- Enlarge
To enlarge the Text page for comfortable reading.
- Reveal
To unhide hidden information on a page.
- Cycle subpages
To cycle subpages when these are available.
- Language
To switch the group of characters that Text uses to
display correctly.
- Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text Setup
Text language
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1. Press , select Setting > General settings and
press (right) to enter the menu.
2. Select Languages and press (right) to enter
the menu.
3. Select Primary teletext or Secondary teletext ,
and press OK.
4. Select the language you need and press OK.
5. Press (left) repeatedly if necessary, to close the
menu.
Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5…
1. Press TEXT.
2. With Text/Teletext open on screen,
press OPTIONS.
3. Select Text 2.5 > Off.
4. Press (left) repeatedly if necessary, to close the
menu.
33
8
TV Guide
8.1
What You Need
With the TV guide you can view a list of the current
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
guide information.
The TV can collect TV guide information for the
channels that are installed on the TV (e.g the
channels you watch with Watch TV). The TV cannot
collect the TV guide information for channels viewed
from a digital receiver.
8.2
Using the TV Guide
Open the TV Guide
To open the TV guide, press TV GUIDE.
Press TV GUIDE again to close.
The first time you open the TV guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV guide data is stored in the
TV.
Tune to a Programme
Switch to a programme
From the TV guide, you can switch to a current
programme.
To select a programme, use the arrow keys to
highlight the programme name.
Navigate to the right to view programmes scheduled
later that day.
To switch to the programme (channel), select the
programme and press OK.
View programme details
To call up the details of the selected programme,
press INFO .
Change Day
If the TV guide information comes from the
broadcaster, you can press + to view the
schedule of one of the next days. Press - to go
back to the previous day.
Alternatively, you can press OPTIONS and
select Change day.
Set a Reminder
You can set a reminder for a programme. A message
will alert you at the start of the programme. You can
tune to this channel immediately.
In the TV Guide a programme with a reminder is
marked with a (clock).
To set a reminder…
1. Press TV GUIDE and select an upcoming
programme.
2. Press Set reminder and press OK.
To clear a reminder…
1. Press TV GUIDE and select a programme with
the reminder, which is marked with a (clock).
2. Press Clear reminder, and select Yes, then
press OK.
Search by Genre
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
etc.
To search for programmes by genre,
press OPTIONS and select Search by genre.
Select a genre and press OK. A list with the found
programmes appears.
List of Reminders
You can view a list of the reminders you have set.
List of Reminders
To open the list of reminders…
1. Press TV GUIDE.
2. Press OPTIONS and select All reminders.
3. In the list of reminders, select the reminder you
want to remove, the selected reminder is marked
as .
4. Press , select Clear selected and press OK.
5. Select Close to close the list of reminders.
34
Set a Recording
You can set a recording in the TV Guide.
In the TV Guide, a programme set to be recorded is
marked with .
To see the recording list, press Recordings , a
programme set to be recorded is marked with
a (red dot) on the front of the programme name.
To record a programme…
1. Press TV GUIDE and select a future or ongoing
programme.
2. Press the colour key Record .
To cancel a recording…
1. Press TV GUIDE and select the programme set
for recording.
2. Press the colour key Clear recording .
35
9
Recording and
Pause TV
9.1
What You Need
If you connect a USB Hard Drive, you can pause or
record digital TV broadcasts (DVB broadcasts or
similar).
Minimum Disk Space
- To pause a broadcast, you need a USB compatible
Hard Drive with a minimum of 4GB disk space.
- To pause and record a broadcast, you need a
minimum of 32GB disk space.
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
To Pause
To pause a broadcast, you need a USB compatible
Hard Drive with a minimum of 4GB disk space.
To Record
To pause and record a broadcast, you need a
minimum of 32GB disk space.
1. Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2. Switch on the USB Hard Drive and the TV.
3. When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
9.2
Recording
What You Need
You can record a digital TV broadcast and watch it
later.
To record a TV programme you need…
- a connected USB Hard Drive formatted on this TV
- digital TV channels installed on this TV
- to receive channel information for the on screen TV
Guide
- a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
In terms enforcement of copyright legislation, some
DVB providers can apply different restriction by
means of DRM (Digital Right Management)
technology. In case of broadcasting protected
channels, recording, record validity or number of
views may be restricted. Recording may be
completely prohibited. In case of trying to record a
protected broadcasting or play back an expired
recording, an error message can appear.
Record a Programme
Record Now
To record the programme you are watching right now,
press (Record) on the remote control. The
recording will start immediately.
To stop the recording, press (Stop).
When TV Guide data is available, the programme you
are watching will be recorded from the moment you
pressed the recording key until the programme
ends. If no TV Guide data is available, the recording
will only last 30 minutes. You can adjust the end time
of the recording in the list of Recordings.
36
Schedule a Recording
You can schedule a recording of an upcoming
programme for today or a few days from today
(maximum of 8 days away). The TV will use the data
from the TV Guide to start and end the recording.
To record a programme…
1. Press TV GUIDE.
2. On the TV guide, select the channel and
programme you wish to record. Press (Right)
or (Left) to scroll through the programmes of a
channel.
3. With the programme highlighted, press the colour
key Record . The programme is scheduled for
recording. A warning will show automatically when
overlapping recordings are scheduled. If you plan to
record a programme in your absence, remember to
leave the TV switched to Standby and the USB Hard
Drive switched on.
List of Recordings
You can view and manage your recordings in the list
of recordings. Next to the list of recordings, there is a
separate list for scheduled recordings and reminders.
To open the list or recordings…
1. Press TV GUIDE.
2. Press the colour key Recordings .
3. With a recording selected in the list, you can
remove the recording with the colour
key Remove . You can rename a recording
with the colour key Rename. Or you can
press the colour key Adjust time to change the
recording start time and end time.
Watch a Recording
To watch a recording…
1. Press TV GUIDE.
2. Press the colour key Recordings .
3. In the list of recordings, select the recording you
need and press OK to start watching.
4. You can use the
keys (pause), (play), (rewind), (fast
forward) or (stop).
5. To switch back to watch TV, press EXIT.
9.3
Pause TV
What You Need
You can pause a digital TV broadcast and resume
watching it a bit later.
To pause a TV programme you need…
- a connected USB Hard Drive formatted on this TV
- digital TV channels installed on this TV
- to receive channel information for the on screen TV
Guide
With the USB Hard Drive connected and formatted,
the TV continuously stores the TV broadcast you are
watching. When you switch to another channel, the
broadcast of the former channel is cleared. Also
when you switch the TV to standby the broadcast is
cleared.
You cannot use Pause TV when you are recording.
Pause a Programme
To pause and resume a broadcast…
To pause a broadcast, press (Pause). A progress
bar at the bottom of the screen appears briefly.
To call up the progress bar, press (Pause) again.
To resume watching, press (Play).
With the progress bar on screen, press (Rewind)
or press (Forward) to select from where you want
to start viewing the paused broadcast. Press these
keys repeatedly to change speed.
You can pause a broadcast for a maximum time span
of 90 minutes.
To switch back to the live TV broadcast,
press (Stop).
Replay
Since the TV stores the broadcast you are watching,
you can mostly replay the broadcast for a few
seconds.
To replay a current broadcast…
1. Press (Pause)
2. Press (Rewind). You can press repeatedly
to select from where you want to start viewing the
paused broadcast. Press these keys repeatedly to
change speed. At one point you will reach the start of
the broadcast storage or the maximum time span.
3. Press (Play) to watch the broadcast again.
4. Press (Stop) to watch the broadcast live.
37
10
Videos, Photos and
Music
10.1
From a USB Connection
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard
Drive.
With the TV switched on, plug in a USB flash drive or a
USB Hard Drive to the USB connection.
Press SOURCES, then select USB, you can
browse your files in folder structure you have
organised on the USB Hard Drive.
Warning
If you try to pause or record a programme with a USB
Hard Drive connected, the TV will ask you to format
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive.
10.2
Photos
View Photos
Open photo folder
1. Press SOURCES, select USB and
press OK.
2. Select USB Flash Drive and press (right) to
select the USB device you need.
3. Select Photos, you can press List to have
list view or press again Thumbnails for
thumbnail view.
View a photo file
1. Press SOURCES, select USB and
press OK.
2. Select USB Flash Drive and press (right) to
select the USB device you need.
3. Select Photos and select one of photos, you
can press OK to view the selected photo.
Photo Options
With a photo on screen, press OPTIONS to…
Start slideshow, Stop slideshow
Start or stop slideshow.
Slideshow transitions
Set the transition from one picture to the next.
Slideshow frequency
Select the display time for each photo.
Repeat, Play once
View the pictures repeatedly or once only.
Shuffle off, Shuffle on
View the pictures in sequential order, or at random.
Rotate image
Rotate photo.
10.3
Videos
Play Videos
To play a video on TV…
Select Videos , and select the file name and
press OK.
- To pause the video, press OK. Press OK again to
continue.
- To rewind or go fast forward, press or . Press
the keys several times to speed up - 2x, 4x, 8x, 16x,
32x.
- To jump to the next or previous video in a folder,
press + or -.
- To stop the video playback, press (Stop).
- To go back to the folder, press .
Open video folder
1. Press SOURCES, select USB and
press OK.
2. Select USB Flash Drive and press (right) to
select the USB device you need.
3. Select Videos, you can press List to have list
view or press again Thumbnails for thumbnail
view.
Play a video file
1. Press SOURCES, select USB and
press OK.
2. Select USB Flash Drive and press (right) to
select the USB device you need.
3. Select Videos and select one of video, you
can press OK to play the selected video or
press Play all to play all video files in the video
38
folder.
Video Options
During the video playback, press OPTIONS to…
Subtitles
Display the subtitles if available, select On, Off,
or On during mute.
Subtitle language
Play the subtitle language if available.
Charater set
Select one of system for charater.
Audio language
Play the audio language if available.
Shuffle on, Shuffle off
Play videos in sequence or at random.
Repeat, Play once
Play videos repeatedly or once.
Show info
Display file information, like sound mode.
Subtitle settings
Set subtitle colour, font size, position, time sync
offset if available.
10.4
Music
Play Music
Open music folder
1. Press SOURCES, select USB and
press OK.
2. Select USB Flash Drive and press (right) to
select the USB device you need.
3. Select Music, you can see music files in list.
Play a music file
1. Press SOURCES, select USB and
press OK.
2. Select USB Flash Drive and press (right) to
select the USB device you need.
3. Select Music and select one of music, you
can press OK to play the selected music or
press Play all to play all music files in the music
folder.
Music Options
Options for playing music...
Repeat, Play once
Play songs repeatedly or once.
Shuffle on, Shuffle off
Play songs in sequence or at random.
39
11
Open TV Setting
Menus
11.1
Home Menu Overview
Press (Home) to select one of below menus, then
press OK.
Channels
This row contains all channles.
- Press OK to open TV guide.
- Press (left) to view channels with channel logos,
or select see all to view all channels.
Sources
This row contains available sources in this TV.
Utilities
This row contains TV functions which are available for
user.
Settings
This row contains settings which are available for
user.
11.2
Utilities Menu
TV guide
Open TV guide. For more information, in User
manual, see chapter TV Guide.
Recordings
For more information, in User manual, see
chapter Recording and Pause TV.
Channels
View channel list.
Update software
For more information, in User manual, see
chapter Software.
Demo Me
View Demo Me for demo on this TV.
11.3
Quick Settings and All
Settings
Quick settings menu:
Press SETUP key on the remote control to find
frequently used settings in Quick settings menu.
- Picture style: Select one of preset picture styles for
ideal picture viewing.
- Picture format: Select one of preset picture format
which fits the screen.
- Sound style: Select one of preset sound styles for
ideal sound settings.
- Headphone volume: Adjust the volume of a
connected headphone.
- Audio out: Set the TV to play the sound on TV or on
the connected audio system.
- Clock: Display clock on the right-top corner TV
screen.
- Sleep timer: Set the TV to switch to standby
automatically after a preset time.
- All settings: View all settings menu.
- Help: Easily get software updated, reset TV to
default settings, and read user manual.
All settings menu:
Press (home) key on the remote control,
select Settings, and press OK.
11.4
All Settings
Picture Settings
Picture Style
Select a style
For easy picture adjustment, you can select a preset
picture style.
(Home) > Settings > Picture > Picture style
The available Picture styles are ...
- Personal - The picture preferences you set during
the first start up
- Vivid - Ideal for daylight viewing
- Natural - Natural picture settings
- Standard - Most energy conscious setting
40
- Movie - Ideal for watching movies
- Game - Ideal for gaming
Custom a style
You can adjust and stored picture settings in in the
currently selected picture style,
like Colour, Contrast or Sharpness.
Restore a style
To restore the style to its original setting, select back
to Picture style, then press Restore style.
Colour, Contrast, Sharpness, Brightness
Adjust the picture colour
(Home) > Settings > Picture > Colour
Press the arrows (up) or (down) to adjust the
colour saturation value of the picture.
Adjust the picture contrast
(Home) > Settings > Picture > Contrast
Press the arrows (up) or (down) to adjust the
contrast value of the picture.
You can decrease contrast value to reduce power
consumption.
Adjust the picture sharpness
(Home) > Settings > Picture > Sharpness
Press the arrows (up) or (down) to adjust the
sharpness value of the picture.
Advanced Picture Settings
Computer
(Home) > Settings > Picture >
Advanced > Computer
Set to On to have the ideal picture setting for use
your TV as a computer monitor.
* Only available for HDMI and VGA sources.
Colour Settings
(Home) > Settings > Picture >
Advanced > Colour
Adjust the colour enhancement
(Home) > Settings > Picture >
Advanced > Colour > Colour enhancement
Select Maximum, Medium, or Minimum to set the
level of the colour intensity and the details in bright
colours.
Select the preset colour temperature
(Home) > Settings > Picture >
Advanced > Colour > Colour temperature
Select Normal, Warm, or Cool to set the colour
temperature for your preference.
Customise colour temperature
(Home) > Settings > Picture >
Advanced > Colour > Custom colour temperature
Select Custom in Colour temperature menu
to customise a colour temperature yourself. Press
the arrows (up) or (down) to adjust the value.
Contrast Settings
Contrast Modes
(Home) > Settings > Picture > Advanced >
Contrast > Contrast mode
Select Normal, Optimized for picture, Optimized for
energy saving to set the TV automatically reduces
the contrast, for best power consumption or for best
picture experience, or select Off to switch off the
adjustment.
Dynamic Contrast
(Home) > Settings > Picture >
Advanced > Contrast > Dynamic contrast
Select Maximum, Medium, or Minimum to set the
level at which the TV automatically enhances the
details in the dark, middle and light areas of the
picture.
Video Contrast, Gamma
Video contrast
(Home) > Settings > Picture >
Advanced > Contrast > Video contrast
Press the arrows (up) or (down) to adjust the
video contrast level.
41
Gamma
(Home) > Settings > Picture >
Advanced > Contrast > Gamma
Press the arrows (up) or (down) to set a non-
linear setting for picture luminance and contrast.
Super Resolution
(Home) > Settings > Picture > Advanced >
Sharpness > Super Resolution
Select On to have a superior sharpness in line edges
and details.
Picture Clean
(Home) > Settings > Picture > Advanced >
Picture clean
Noise reduction
(Home) > Settings > Picture >
Advanced > Picture clean > Noise reduction
Select Maximum, Medium, Minimum to set the
level for removing the noise in video content.
Noise is mostly visible as small moving dots in on-
screen picture.
MPEG Artefact Reduction
(Home) > Settings > Picture >
Advanced > Picture clean > MPEG artefact
reduction
Select On to smoothen the digital transitions in the
picture.
MPEG artefacts are mostly visible as small blocks or
jagged edges in on-screen images.
Format and Edges
(Home) > Settings > Picture > Format and
edges
Picture format
(Home) > Settings > Picture > Format and
edges > Picture format
If black bars appear on top and bottom or on both
sides of the picture, you can adjust the picture format
to a format that fills the screen.
Screen Edges
(Home) > Settings > Picture > Format and
edges > Picture format > Screen edges
With Screen edges, you can slightly enlarge the
picture to hide distorted edges.
Sound Settings
Sound Style
Select a style
For easy sound adjustment, you can select a preset
sound style.
(Home) > Settings > Sound > Sound style
The available sound styles are ...
- Personal - The sound preferences you set during
the first start up.
- Original - Most neutral sound setting
- Movie - Ideal for watching movies
- Music - Ideal for listening to music
- Game - Ideal for gaming
- News - Ideal for speech
Custom a style
You can adjust and stored sound settings in the
currently selected sound style, like Bass or Treble.
Restore a style
To restore the style to its original setting, select back
to Sound style, then press Restore style.
Bass, Treble
Bass
(Home) > Settings > Sound > Bass
Press the arrows (up) or (down) to
adjust the level of low tones in the sound.
Treble
(Home) > Settings > Sound > Treble
Press the arrows (up) or (down) to adjust the
level of high tones in the sound.
Headphone Volume
(Home) > Settings > Sound > Headphone
volume
Press the arrows (up) or (down) to adjust the
42
volume of a connected headphone separately.
Surround Sound
(Home) > Settings > Sound > Surround Sound
Select the surround sound effect for the internal TV
speakers.
TV Placement
(Home) > Settings > Sound > TV placement
Select On a TV stand or On the wall to have best
sound reproduction according to the setting.
Advanced Sound Settings
Volume Control
Auto volume levelling
(Home) > Settings > Sound > Advanced >
Auto volume levelling
Select On to automatically level out sudden
volume differences. Typically when you are
switching channels.
Delta volume
(Home) > Settings > Sound >
Advanced > Delta volume
Press the arrows (up) or (down) to adjust the
delta value for TV speaker volume.
Audio Out Settings
(Home) > Settings > Sound >
Advanced > Audio out
Set the TV to play the sound on TV or on the
connected audio system.
You can select where you want to hear the TV sound
and how you want to control it.
- If you select TV speakers off, you permanently
switch off the TV speakers.
- If you select TV speakers, the TV speakers are
always on.
With an audio device connected with HDMI CEC,
select HDMI sound system. The TV will switch off
the TV speakers when the device is playing the
sound.
Clear Sound
(Home) > Settings > Sound >
Advanced > Clear sound
Select On to improve the sound for speech. Ideal for
news programmes.
Digital Output Settings
Digital output settings are available for optical and
HDMI ARC sound signals.
Digital out fomat
(Home) > Settings > Sound >
Advanced > Digital out format
Set the audio out signal of the TV to fit the sound
capabilities of the connected Home Theatre System.
- If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities,
set Digital out format to Multichannel. With
Multichannel, the TV can send the compressed
multichannel sound signal from a TV channel or
connected player to the Home Theatre System.
- If you have a Home Theatre System without
multichannel sound processing, select Stereo.
Digital out levelling
(Home) > Settings > Sound >
Advanced > Digital out levelling
Adjust the loudness level from device which is
connected to digital audio output (SPDIF) or HDMI.
- Select More to have louder volume.
- Select Less to have softer volume.
Digital out delay
(Home) > Settings > Sound >
Advanced > Digital out delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. Select Off if a sound delay is set on
your Home Theatre System.
Digital out offset (Only available when Digital out
delay set to On)
(Home) > Settings > Sound >
Advanced > Digital out offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound.
You can set an offset that compensates for the time
necessary for the Home Theatre System to process
43
the sound of the TV picture.
You can set the value in steps of 5ms. Maximum
setting is 60ms.
Eco Settings
Set energy saving level
(Home) > Settings > Eco settings > Energy
saving
Select Minimium, Medium, or Maximium to have
different degress for energy saving, or select Off to
switch off energy saving mode.
Set screen off to save energy consumption
(Home) > Settings > Eco settings > Screen off
Select Screen off, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Set TV switch off timer
(Home) > Settings > Eco settings > Switch off
timer.
Press the arrows (up) or (down) to adjust the
value. The value 0 (Off) deactivates the automatic
switch off.
Select Switch off timer, the TV switches off
automatically to save energy.
* TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour
period.
* TV switches off if not receiving a TV signal nor a
remote control command for 10 minutes.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to 0.
General Settings
Connection Related Settings
USB Hard Drive
(Home) > Settings > General settings > USB
Hard Drive
You need to set up and format a USB Hard Drive
before you record a channel.
CAM Operator Profile
(Home) > Settings > General settings > CAM
Operator Profile
To switch on operator profile for CI+/CAM for easy
channel installation and updates.
HDMI-CEC Connection - EasyLink
Connect HDMI CEC-compatible devices to your TV,
you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched on on
the TV and the connected device.
Switch on EasyLink
(Home) > Settings > General
settings > EasyLink > EasyLink > On.
Operate HDMI CEC-compatible devices with TV
remote control
(Home) > Settings > General
settings > EasyLink > EasyLink remote
control > On.
Note:
- EasyLink might not work with devices from other
brands.
- The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink. Example HDMI CEC branding names are
property of their respective owners.
Location - Home or Shop
Select the location of your TV
(Home) > Settings > General
settings > Location
Select Shop, the picture style is switched back
to Vivid, and can adjust shop settings.
Shop mode is for in-store promotion.
Reset TV Settings and Reinstall TV
Reset all settings value to original TV settings
(Home) > Settings > General
settings > Factory settings
44
Redo full TV installation , and set TV status back to
the first time you switch on
(Home) > Settings > General
settings > Reinstall TV
Enter PIN code and select Yes, the TV will reinstall
completely. All settings will be reset and installed
channels will be replaced. The installation can take a
few minute
Region and Language Settings
Language
(Home) > Settings > Region and
language > Language
Change the language of the TV menu and
messages
(Home) > Settings > Region and
language > Language > Menu language
Set audio preference language
(Home) > Settings > Region and
language > Language > Primary audio language,
Secondary audio language
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to this audio.
Set subtitle preference language
(Home) > Settings > Region and
language > Language > Primary
subtitle language , Secondary subtitle language
Digital channels can offer several subtitle languages
for a programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of
these languages are available, the TV will show the
subtitles you selected.
Set teletex preference language
(Home) > Settings > Region and
language > Language > Primary text, Secondary
text
Some digital TV broadcasters have several Text
languages available.
Clock
(Home) > Settings > Region and
language > Clock
Correct clock automatically
(Home) > Settings > Region and
language > Clock > Auto clock mode
- The standard setting for the TV clock is Automatic.
The time information comes from the broadcasted
UTC - Coordinated Universal Time information.
- If the clock is not correct, you can set the TV clock
to Country dependent.
Correct clock manually
(Home) > Settings > Region and
language > Clock > Auto clock mode > Manual
(Home) > Settings > Region and
language > Clock > Date, Time
Go to previous menu, and select Date and Time to
adjust the value.
Note:
- If none of the automatic settings display the time
correctly, you can set the time manually.
- If you schedule recordings from the TV Guide, we
recommend not to change the time and date
manually.
Set time zone or set a time offset for your region
(Home) > Settings > Region and
language > Clock > Time zone
Select one of the time zones.
Set the TV to switch to Standby automatically after a
preset time
(Home) > Settings > Region and
language > Clock > Sleep timer
Set the TV to switch to Standby automatically after a
preset time. With the slider bar you can set the time
to up to 180 minutes in increments of 5 minutes. If set
to 0 minutes, the sleep timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
45
Universal Access Settings
(Home) > Settings > Universal access
With Universal Access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind or
partially sighted people.
Switch on universal access settings
(Home) > Settings > Universal
access > Universal access > On.
Universal access for hearing impaired people
(Home) > Settings > Universal
access > Hearing impaired > On
- Some digital TV channels broadcast special audio
and subtitles adapted for the hard of hearing or deaf
people.
- Switched on, the TV automatically switches to the
adapted audio and subtitles, if available.
Universal access for blind or partially sighted
people
(Home) > Settings > Universal access > Audio
description > Audio description > On
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
(Home) > Settings > Universal access > Audio
description > Audio description > Mixed volume,
Audio effects, Speech, Speakers / Headphone
- Select Mixed volume, you can mix the volume of
the normal audio with the audio commentary. Press
the arrows (up) or (down) to adjust the value.
- Set Audio effect to On for extra audio effects in
the commentary audio, like stereo or fading sound.
- Select Speech to set speech
preference, Descriptive or Subtitles.
- Select Speakers / Headphones to set the sound
from TV speakers or connected headphones.
Lock Settings
Set Code and Change Code
Set new code or reset change code
(Home) > Settings > Child lock > Set
code, Change code
The child lock code is used to lock or unlock channels
or programmes.
Note: If you forgot your PIN code, you can override
the current code use 8888 and enter a new code.
Lock for Programme
(Home) > Settings > Child lock > Parental
rating
Set a minumum age to watch rated programmes.
CAM PIN
(Home) > Settings > Child lock > CAM PIN
Set CAM PIN for recording.
46
12
Environmental
12.1
European Energy Label
The European Energy Label informs you on the
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the
lower the energy it consumes.
On the label, you can find the energy efficiency class,
the average power consumption of this product in use
and the average energy consumption for 1 year. You
can also find the power consumption values for this
product on the Philips website for your country
at www.philips.com/TV
12.2
Product Fiche
4022 series TV
22PFx4022
- Energy Efficiency Class : A
- Visible Screen Size : 55 cm / 22 inch
- On Mode Power Consumption (W) : 20 W
- Annual Energy Consumption (kWh) * : 30 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920x1080
24PHx4022
- Energy Efficiency Class : A+
- Visible Screen Size : 60 cm / 24 inch
- On Mode Power Consumption (W) : 18 W
- Annual Energy Consumption (kWh) * : 27 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1366 x 768
24PFx4022
- Energy Efficiency Class : A+
- Visible Screen Size : 60 cm / 24 inch
- On Mode Power Consumption (W) : 19 W
- Annual Energy Consumption (kWh) * : 28 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920x1080
* Energy consumption kWh per year, based on the
power consumption of the television operating 4
hours per day for 365 days. The actual energy
consumption depends on how the television is used.
** When the TV is turned off with the remote control
and no function is active.
4032 series TV
24PHx4032
- Energy Efficiency Class : A+
- Visible Screen Size : 60 cm / 24 inch
- On Mode Power Consumption (W) : 18 W
- Annual Energy Consumption (kWh) * : 27 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1366 x 768
24PFx4032
- Energy Efficiency Class : A+
- Visible Screen Size : 60 cm / 24 inch
- On Mode Power Consumption (W) : 19 W
- Annual Energy Consumption (kWh) * : 28 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920x1080
32PHx4032
- Energy Efficiency Class : A+
- Visible Screen Size : 80 cm / 32 inch
- On Mode Power Consumption (W) : 31 W
- Annual Energy Consumption (kWh) * : 46 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1366 x 768
* Energy consumption kWh per year, based on the
power consumption of the television operating 4
hours per day for 365 days. The actual energy
consumption depends on how the television is used.
** When the TV is turned off with the remote control
and no function is active.
4112 series TV
32PHx4112
- Energy Efficiency Class : A+
- Visible Screen Size : 80 cm / 32 inch
- On Mode Power Consumption (W) : 27 W
- Annual Energy Consumption (kWh) * : 40 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1366 x 768
43PFx4112
- Energy Efficiency Class : A+
- Visible Screen Size : 108 cm / 43 inch
- On Mode Power Consumption (W) : 48 W
- Annual Energy Consumption (kWh) * : 71 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920 x 1080
* Energy consumption kWh per year, based on the
power consumption of the television operating 4
hours per day for 365 days. The actual energy
consumption depends on how the television is used.
** When the TV is turned off with the remote control
47
and no function is active.
4132 series TV
32PHx4132
- Energy Efficiency Class : A+
- Visible Screen Size : 80 cm / 32 inch
- On Mode Power Consumption (W) : 31 W
- Annual Energy Consumption (kWh) * : 46 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1366 x 768
32PFx4132
- Energy Efficiency Class : A
- Visible Screen Size : 80 cm / 32 inch
- On Mode Power Consumption (W) : 35 W
- Annual Energy Consumption (kWh) * : 52 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920x1080
43PFx4132
- Energy Efficiency Class : A+
- Visible Screen Size : 108 cm / 43 inch
- On Mode Power Consumption (W) : 40 W
- Annual Energy Consumption (kWh) * : 59 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920x1080
49PFx4132
- Energy Efficiency Class : A+
- Visible Screen Size : 123 cm / 49 inch
- On Mode Power Consumption (W) : 51 W
- Annual Energy Consumption (kWh) * : 75 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920x1080
* Energy consumption kWh per year, based on the
power consumption of the television operating 4
hours per day for 365 days. The actual energy
consumption depends on how the television is used.
** When the TV is turned off with the remote control
and no function is active.
4232 series TV
22PFx4232
- Energy Efficiency Class : A
- Visible Screen Size : 55 cm / 22 inch
- On Mode Power Consumption (W) : 19 W
- Annual Energy Consumption (kWh) * : 28 kWh
- Standby Power Consumption (W) **: 0.30 W
- Display Resolution (Pixels) : 1920x1080
* Energy consumption kWh per year, based on the
power consumption of the television operating 4
hours per day for 365 days. The actual energy
consumption depends on how the television is used.
** When the TV is turned off with the remote control
and no function is active.
12.3
End of Use
Disposal of your old product and batteries
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2012/19/EU.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. Correct disposal of your old
product helps to prevent potential negative
consequences for the environment and human
health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
48
for the environment and human health.
49
13
Specifications
13.1
Power (For 4022, 4032, 4112,
4132 Series)
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Power
- Mains power : AC 220-240V +/-10%
- Ambient temperature : 5°C to 35°C
For power consumption information, see
chapter Product Fiche.
The power rating stated on the product typeplate is
the power consumption for this product during
normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
used for electrical safety (IEC 60065 Ed. 8.0).
13.2
Power (For 4232 Series)
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Power
- Mains power : AC 220-240V +/-10%
- Power cable: 12 volt cable
- Ambient temperature : 5°C to 35°C
For power consumption information, see
chapter Product Fiche.
The power rating stated on the product typeplate is
the power consumption for this product during
normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
used for electrical safety (IEC 60065 Ed. 8.0).
13.3
Reception
For PxT series TV
- Aerial input : 75 ohm coaxial (IEC75)
- Tuner bands : Hyperband, S-Channel, UHF, VHF
- DVB : DVB-T2, DVB-C (cable) QAM
- Analogue video playback : SECAM, PAL
- Digital video playback : MPEG2 SD/HD (ISO/IEC
13818-2), MPEG4 SD/HD (ISO/IEC 14496-10), HEVC*
- Digital audio playback (ISO/IEC 13818-3)
* Only for DVB-T2
For PxS series TV
- Aerial input : 75 ohm coaxial (IEC75)
- Tuner bands : Hyperband, S-Channel, UHF, VHF
- DVB : DVB-T2, DVB-C (cable) QAM
- Analogue video playback : SECAM, PAL
- Digital video playback : MPEG2 SD/HD (ISO/IEC
13818-2), MPEG4 SD/HD (ISO/IEC 14496-10), HEVC*
- Digital audio playback (ISO/IEC 13818-3)
- Satellite aerial input : 75 ohm F-type
- Input frequency range : 950 to 2150MHz
- Input level range : 25 to 65 dBm
- DVB-S2 QPSK, symbol rate 2 to 45M symbols, SCPC
and MCPC
- LNB : DiSEqC 1.0, 1 to 4 LNBs supported, Polarity
selection 14/18V, Band selection 22kHz, Tone burst
mode, LNB current 300mA max
* Only for DVB-T2, DVB-S2
13.4
Display Resolution
4022 series TV
Diagonal screen size
- 22PFx4022 : 55 cm / 22 inch
- 24Pxx4022 : 60 cm / 24 inch
Display resolution
- PHx4022: 1366x768
- PFx4022: 1920x1080
4032 series TV
Diagonal screen size
- 24Pxx4032 : 60 cm / 24 inch
- 32PHx4032 : 80 cm / 32 inch
Display resolution
- PHx4032: 1366x768
- PFx4032: 1920x1080
50
4112 series TV
Diagonal screen size
- 32PHx4112 : 80 cm / 32 inch
- 39PHx4112 : 98 cm / 39 inch
- 43PFx4112 : 108 cm / 43 inch
Display resolution
- PHx4112: 1366x768
- PFx4112: 1920x1080
4132 series TV
Diagonal screen size
- 32Pxx4132 : 80 cm / 32 inch
- 43PFx4132 : 108 cm / 43 inch
- 49PFx4132 : 123 cm / 49 inch
Display resolution
- PHx4132: 1366x768
- PFx4132: 1920x1080
4232 series TV
Diagonal screen size
- 22PFx4232 : 55 cm / 22 inch
Display resolution
- PFx4022: 1920x1080p
13.5
Display Input Resolution
For PHx series TV
Video formats
Resolution — Refresh rate
- 480i - 60 Hz
- 480p - 60 Hz
- 576i - 50 Hz
- 576p - 50 Hz
- 720p - 50 Hz, 60 Hz
- 1080i - 50 Hz, 60 Hz
- 1080p - 24 Hz, 25 Hz, 30 Hz
Computer formats
Resolutions (amongst others)
- 640 x 480p - 60 Hz
- 800 x 600p - 60 Hz
- 1024 x 768p - 60 Hz
- 1280 x 768p - 60 Hz
- 1360 x 765p - 60 Hz
- 1360 x 768p - 60 Hz
For PFx series TV
Video formats
Resolution — Refresh rate
- 480i - 60 Hz
- 480p - 60 Hz
- 576i - 50 Hz
- 576p - 50 Hz
- 720p - 50 Hz, 60 Hz
- 1080i - 50 Hz, 60 Hz
- 1080p - 24 Hz, 25 Hz, 30 Hz
Computer formats
Resolutions (amongst others)
- 640 x 480p - 60 Hz
- 800 x 600p - 60 Hz
- 1024 x 768p - 60 Hz
- 1280 x 768p - 60 Hz
- 1360 x 765p - 60 Hz
- 1360 x 768p - 60 Hz
- 1280 x 1024p - 60 Hz
- 1920 x 1080p - 60 Hz
13.6
Sound
4022 series TV
- Output power (RMS) : 6W
- Dolby Audio
- DTS 2.0+ Digital out ™
4032 series TV
- Output power (RMS) : 16W (32"), 6W (24")
- Dolby Audio
- DTS 2.0+ Digital out ™
4112 series TV
- Output power (RMS) : 16W
- Dolby Audio
- DTS 2.0+ Digital out ™
51
4132 series TV
- Output power (RMS) : 16W
- Dolby Audio
- DTS 2.0+ Digital out ™
4232 series TV
- Output power (RMS) : 6W
- Dolby Audio
- DTS 2.0+ Digital out ™
13.7
Multimedia
Supported USB file systems
- USB (FAT / FAT 32 / NTFS): only connect USB
devices that consume 500 mA of power or less.
Playback formats
- Image Codec : JPEG, GIF, PNG, BMP
- Audio Codec: MP3, WAV, WMA (v2 up to v9.2), AC3,
AAC, HE-AAC, DTS 2.0
- Video Codec: AVI, MKV, H.264/MPEG-4 AVC,
MPEG1, MPEG2, MPEG4, WMV9/VC1, HEVC
- Subtitle: SRT, SMI, SSA, SUB, ASS, TXT
13.8
Connectivity
4022, 4032, 4132, 4232 series TV (22
inch, 24 inch)
For PxS4xx2
TV Rear
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- DIGITAL AUDIO OUT: SPDIF
- VGA
- AUDIO IN (DVI/VGA): Stereo 3.5mm mini-jack
- SCART (RGB/CVBS): SCART adaptor
- TV ANTENNA: 75 ohm coaxial (IEC)
- Satellite
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
For PxT4xx2
TV Rear
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- DIGITAL AUDIO OUT: SPDIF
- VGA
- AUDIO IN (DVI/VGA): Stereo 3.5mm mini-jack
- AUDIO IN (DVI): Stereo 3.5mm mini-jack
- SCART (RGB/CVBS): SCART adaptor
- TV ANTENNA: 75 ohm coaxial (IEC)
- Network LAN - RJ45 (for Freeview HD)*
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
* Only for xxPxT4xx2/05 series
4032, 4132 series TV (32 inch, 43 inch,
49 inch)
For PxS4xx2
TV Rear
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- DIGITAL AUDIO OUT: SPDIF
- AUDIO IN (DVI): Stereo 3.5mm mini-jack
- SCART (RGB/CVBS): SCART adaptor
- TV ANTENNA: 75 ohm coaxial (IEC)
- Satellite
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
For PxT4xx2
TV Rear
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- DIGITAL AUDIO OUT: SPDIF
- AUDIO IN (DVI): Stereo 3.5mm mini-jack
- SCART (RGB/CVBS): SCART adaptor
- TV ANTENNA: 75 ohm coaxial (IEC)
- Network LAN - RJ45 (for Freeview HD)*
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
* Only for xxPxT4xx2/05 series
52
4112 series TV (43 inch)
For PxS4112
TV Rear
- Headphones: Stereo 3.5mm mini-jack
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- DIGITAL AUDIO OUT: SPDIF
- AV IN (CVBS, L, R)
- TV ANTENNA: 75 ohm coaxial (IEC)
- Satellite
TV Side
- CI: Common Interface
- USB
For PxT4112
TV Rear
- Headphones: Stereo 3.5mm mini-jack
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- DIGITAL AUDIO OUT: SPDIF
- AV IN (CVBS, L, R)
- TV ANTENNA: 75 ohm coaxial (IEC)
- Network LAN - RJ45 (for Freeview HD)*
TV Side
- CI: Common Interface
- USB
* Only for xxPxT4xx2/05 series
4112 series TV (32 inch, 39 inch)
For PxS4112
TV Rear
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- DIGITAL AUDIO OUT: SPDIF
- AV IN (CVBS, L, R)
- TV ANTENNA: 75 ohm coaxial (IEC)
- Satellite
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
For PxT4112
TV Rear
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- DIGITAL AUDIO OUT: SPDIF
- AV IN (CVBS, L, R)
- TV ANTENNA: 75 ohm coaxial (IEC)
- Network LAN - RJ45 (for Freeview HD)*
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
* Only for xxPxT4xx2/05 series
53
14
Troubleshooting
14.1
Tips
If you can't find a solution for your TV problem
in Troubleshooting, you can
press Settings > Help > User manual to find
the information you are looking for.
If the User manual doen't answer your question, you
can go to the support website of Philips.
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support.
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
For more TV troubleshooting and frequently asked
questions (FAQs)...
Go
to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant
Help page from your computer.
To download the Help (user manual) go
to www.philips.com/support
14.2
Switch On
The TV does not switch on
- Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it. Make sure that
the power cable is securely connected. Try switching
on again.
- Connect the TV to another wall mains socket and try
switching on.
- Disconnect all connected devices from the TV and
try switching on.
- If the standby light on TV is on, the TV might not
respond to the remote control.
Creaking sound at startup or switch off
When you are turning the TV on, off or to standby,
you hear a creaking sound from the TV chassis. The
creaking sound is due to the normal expansion and
contraction of the TV as it cools and warms up. This
does not affect performance.
The TV goes back to standby after showing the
Philips startup screen
When the TV is in standby, a Philips startup screen is
displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
and reconnected to the power supply, the startup
screen is displayed at the next startup. To switch on
the TV from standby, press (Standby / On) the
remote control or the TV.
The standby light keeps on blinking
Disconnect the power cable from the power outlet.
Wait 5 minutes before you reconnect the power
cable. If the blinking reoccurs, contact Philips TV
Consumer Care.
TV switches off by itself
If the TV switches off suddenly, the setting Switch off
timer might be switched on. With Switch off
timer the TV switches off after 4 hours if no remote
control signals were received. To avoid this automatic
switch off, you can deactivate this switch off.
Also, if the TV does not receive a TV signal nor a
remote control command for 10 minutes, the TV
switches off automatically.
14.3
Remote Control
TV does not respond to the remote control
The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behaviour.
If the TV continues to be unresponsive to the remote
control, you can check if the remote control is working
by means of a mobile phone camera. Put the phone
in camera mode and point the remote control to the
camera lens. If you press any key on the remote
control and you notice the infra red LED flicker
through the camera, the remote control is working.
The TV needs to be checked.
If you do not notice the flickering, the remote control
might be broken or its batteries are low.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
54
14.4
Channels
No digital channels found during the installation
See the technical specifications to make sure that
your TV supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected and
that the correct network is selected.
Previously installed channels are not in the channel
list
Make sure that the correct channel list is selected.
14.5
Picture
No picture / distorted picture
- Make sure that the antenna is properly connected
to the TV.
- Make sure that the correct device is selected as the
display source.
- Make sure that the external device or source is
properly connected.
Sound but no picture
- Make sure that the picture settings are set correctly.
Poor antenna reception
- Make sure that the antenna is properly connected
to the TV.
- Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality. If possible, try to improve
the reception quality by changing the antenna
direction or moving devices away from the TV.
- If reception on only one channel is poor, fine-tune
this channel with Manual Installation.
Poor picture from a device
- Make sure that the device is connected properly.
- Make sure that the picture settings are set correctly.
Picture settings change after a while
- Make sure that Location is set to Home . You can
change and save settings in this mode.
A commercial banner appears
- Make sure that Location is set to Home.
Picture does not fit the screen
- Change to a different picture format.
Picture format keeps changing with different
channels
- Select a non 'Auto' picture format.
Picture position is incorrect
- Picture signals from some devices may not fit the
screen correctly. Check the signal output of the
connected device.
Computer picture is not stable
- Make sure that your PC uses the supported
resolution and refresh rate.
14.6
Sound
No sound or poor sound quality
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
- Make sure that the sound settings are correctly set.
- Make sure that all cables are properly connected.
- Make sure that the volume is not muted or set to
zero.
- Make sure that the TV audio output is connected to
the audio input on the Home Theatre System.
- Sound should be heard from the HTS speakers.
- Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
14.7
HDMI
HDMI
- Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
- If the TV does not recognise the HDMI device and
no picture is displayed, switch the source from one
device to another and back again.
- If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
- If you use an HDMI-to-DVI adapter or HDMI-to-
DVI cable, make sure that an additional audio cable is
connected to AUDIO IN (mini-jack only), if available.
EasyLink does not work
- Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
No volume icon shown
- When a HDMI-CEC audio device is connected this
55
behaviour is normal.
14.8
USB
Photos, videos and music from a USB device do not
show
- Make sure that the USB storage device is set to
Mass Storage Class compliant, as described in the
storage device's documentation.
- Make sure that the USB storage device is
compatible with the TV.
- Make sure that the audio and picture file formats
are supported by the TV.
Choppy playback of USB files
- The transfer performance of the USB storage
device may limit the data transfer rate to the TV which
causes poor playback.
56
15
Safety and Care
15.1
Safety
Important
Read and understand all safety instructions before
you use the TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Risk of Electric Shock or Fire
- Never expose the TV to rain or water. Never place
liquid containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips TV Consumer Care to have the TV
checked before use.
- Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning
candles, naked flames or other heat sources,
including direct sunlight.
- Never insert objects into the ventilation slots or
other openings on the TV.
- Never place heavy objects on the power cord.
- Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
exerted on the power cord when you swivel the TV
screen.
- To disconnect the TV from the mains power, the
power plug of the TV must be disconnected. When
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
Risk of Injury or Damage to the TV
- Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
- If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
- When wall mounted, ensure that the wall mount can
safely bear the weight of the TV set. TP Vision bears
no responsibility for improper wall mounting that
results in accident, injury or damage.
- Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Risk of damage to the TV !
Before you connect the TV to the power outlet,
ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
to the power outlet if the voltage is different.
Risk of Injury to Children
Follow these precautions to prevent the TV from
toppling over and causing injury to children:
- Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
- Ensure that no part of the TV hangs over the edge
of the mounting surface.
- Never place the TV on tall furniture, such as a
bookcase, without anchoring both the furniture and
TV to the wall or a suitable support.
- Teach children about the dangers of climbing on
furniture to reach the TV.
Risk of swallowing batteries !
The remote control may contain coin-type batteries
which can easily be swallowed by small children.
Keep these batteries out of reach of children at all
times.
Risk of Overheating
Never install the TV in a confined space. Always leave
a space of at least 10 cm or 4 inches around the TV
for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
Lightning Storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Risk of Hearing Damage
Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
57
Low Temperatures
If the TV is transported in temperatures below 5°C or
41°F, unpack the TV and wait until the TV temperature
reaches room temperature before connecting the TV
to the power outlet.
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
15.2
Screen Care
- Never touch, push, rub or strike the screen with any
object.
- Unplug the TV before cleaning.
- Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
- To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
- Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
15.3
Terms of Use
2017 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter referred
to as TP Vision, which is the manufacturer of the
product. TP Vision is the warrantor in relation to the
TV with which this booklet was packaged. Philips and
the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V
or their respective owners. TP Vision reserves the right
to change products at any time without being obliged
to adjust earlier supplies accordingly.
The written material packaged with the TV and the
manual stored in the memory of the TV or
downloaded from the Philips
website www.philips.com/support are believed to
be adequate for the intended use of the system.
The material in this manual is believed adequate for
the intended use of the system. If the product, or its
individual modules or procedures, are used for
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision warrants that the material itself
does not infringe any United States patents. No
further warranty is expressed or implied. TP Vision
cannot be held responsible neither for any errors in
the content of this document nor for any problems as
a result of the content in this document. Errors
reported to Philips will be adapted and published on
the Philips support website as soon as possible.
Terms of warranty - Risk of injury, damage to TV or
void of warranty!
Never attempt to repair the TV yourself. Use the TV
and accessories only as intended by the
manufacturer. The caution sign printed on the back of
the TV indicates risk of electric shock. Never remove
the TV cover. Always contact Philips TV Customer
Care for service or repairs. Find the telephone number
in the printed documentation that came with the
TV. Or consult our
website www.philips.com/support and select your
country if needed. Any operation expressly prohibited
in this manual, or any adjustments and assembly
procedures not recommended or authorised in this
manual, shall void the warranty.
Pixel characteristics
This LCD/LED product has a high number of colour
pixels. Although it has effective pixels of 99.999% or
more, black dots or bright points of light (red, green or
blue) may appear constantly on the screen. This is a
structural property of the display (within common
industry standards) and is not a malfunction.
CE compliance
Hereby, TP Vision Europe B.V. declares that this
television is in compliance with the essential
requirements and other relevant provisions of
Directives 2014/53/EU (RED), 2009/125/EC (Eco
Design), 2010/30/EU (Energy Labelling) and
2011/65/EC (RoHS).
Compliance with EMF
TP Vision manufactures and sells many products
targeted at consumers which, like any electronic
apparatus, in general have the ability to emit and
receive electromagnetic signals. One of TP Vision’s
leading business principles is to take all necessary
health and safety measures for our products, to
comply with all applicable legal requirements and to
stay well within the Electro Magnetic Field (EMF)
58
standards applicable at the time of producing the
products.
TP Vision is committed to developing, producing and
marketing products that cause no adverse health
effects. TP Vision confirms that, as long as its products
are handled properly for their intended use, they are
safe to use according to scientific evidence available
today. TP Vision plays an active role in the
development of international EMF and safety
standards, enabling TP Vision to anticipate further
developments in standardisation for early integration
in its products.
59
16
Copyrights
16.1
HDMI
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
16.2
Dolby Audio
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
16.3
DTS 2.0 + Digital Out ™
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
16.4
Other Trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
60
17
Open Source
17.1
Open Source Software
This television contains open source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
offer is requested by the respective licences.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to .
. .
open.source@tpvision.com
17.2
Open Source License
About Open Source License
README for the source code of the parts of TP Vision
Netherlands B.V. TV software that fall under open
source licenses.
This is a document describing the distribution of the
source code used on the TP Vision Netherlands B.V.
TV, which fall either under the GNU General Public
License (the GPL), or the GNU Lesser General Public
License (the LGPL), or any other open source license.
Instructions to obtain copies of this software can be
found in the Directions For Use.
TP Vision Netherlands B.V. MAKES NO WARRANTIES
WHATSOEVER, EITHER EXPRESS OR IMPLIED,
INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, REGARDING THIS SOFTWARE. TP Vision
Netherlands B.V. offers no support for this software.
The preceding does not affect your warranties and
statutory rights regarding any TP Vision Netherlands
B.V. product(s) you purchased. It only applies to this
source code made available to you.
Open Source
uboot loader
Source: http://www.denx.de/wiki/U-Boot
busybox (v1.23.2)
BusyBox combines tiny versions of many common
UNIX utilities into a single small executable. It
provides replacements for most of the utilities you
usually find in GNU fileutils, shellutils, etc. The utilities
in BusyBox generally have fewer options than their
full-featured GNU cousins; however, the options that
are included provide the expected functionality and
behave very much like their GNU counterparts.
BusyBox provides a fairly complete environment for
any small or embedded system.
Source: https://busybox.net/
libz (1.2.8)
zlib is designed to be a free, general-purpose, legally
unencumbered -- that is, not covered by any patents
-- lossless data-compression library for use on
virtually any computer hardware and operating
system. The zlib data format is itself portable across
platforms.
Source: http://www.zlib.net/
libcurl (7.49.1)
libcurl is a free and easy-to-use client-side URL
transfer library, supporting DICT, FILE, FTP, FTPS,
Gopher, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS,
POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP,
SMTPS, Telnet and TFTP. libcurl supports SSL
certificates, HTTP POST, HTTP PUT, FTP uploading,
HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM,
Negotiate, Kerberos), file transfer resume, http proxy
tunneling and more.
Source: http://curl.haxx.se/libcurl/
log4c (1.2.1)
Apache log4cxx is a logging framework for C++
patterned after Apache log4j, which uses Apache
Portable Runtime for most platform-specific code
and should be usable on any platform supported by
APR. Apache log4cxx is licensed under the Apache
License, an open source license certified by the Open
Source Initiative.
Source:
https://logging.apache.org/log4cxx/latest_stable/
61
libtinycompress (1.1)
A library to handle compressed formats like MP3 etc.
Source: http://git.alsa-
project.org/?p=tinycompress.git;a=summary
Gstreamer (V1.0)
GStreamer is a plugin-based framework licensed
under the LGPL.
Source:
https://gstreamer.freedesktop.org/documentation/lic
ensing.html
mxml (2.8)
Source: http://michaelrsweet.github.io/mxml/
libiconv (1.14)
International text is mostly encoded in Unicode. For
historical reasons, however, it is sometimes still
encoded using a language or country dependent
character encoding.
Source: https://www.gnu.org/software/libiconv/
libavcodec, libavformat, libavutil
FFmpeg is the leading multimedia framework, able to
decode, encode, transcode, mux, demux, stream,
filter and play pretty much anything that humans and
machines have created. It supports the most obscure
ancient formats up to the cutting edge. No matter if
they were designed by some standards committee,
the community or a corporation. It is also highly
portable: FFmpeg compiles, runs, and passes our
testing infrastructure FATE across Linux, Mac OS X,
Microsoft Windows, the BSDs, Solaris, etc. under a
wide variety of build environments, machine
architectures, and configurations.
Source: https://www.ffmpeg.org/
libfreetype (2.6.3)
FreeType is a freely available software library to
render fonts.
It is written in C, designed to be small, efficient, highly
customizable, and portable while capable of
producing high-quality output (glyph images) of most
vector and bitmap font formats.
Source: http://www.freetype.org/
libglibc (2.19)
The GNU C Library project provides the core libraries
for the GNU system and GNU/Linux systems, as well
as many other systems that use Linux as the kernel.
Source: https://www.gnu.org/software/libc/
libstdc++ (6.0.20)
libc++ is a new implementation of the C++ standard
library, targeting C++11.
All of the code in libc++ is dual licensed under the MIT
license and the UIUC License (a BSD-like license).
Source: http://libcxx.llvm.org/
libfribidi (0.19.6)
GNU FriBidi is an implementation of the Unicode
Bidirectional Algorithm (bidi).
GNU FriBidi has no required dependencies. The list of
projects using GNU FriBidi is growing and they
provide a wealth of examples of using the various
APIs to learn from.
Source: https://fribidi.org/
libsqlite3 (3.8.5)
SQLite is an in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
SQLite is an embedded SQL database engine. Unlike
most other SQL databases, SQLite does not have a
separate server process.
SQLite is a compact library. With all features enabled,
62
the library size can be less than 500KiB, depending
on the target platform and compiler optimization
settings.
Source: https://sqlite.org/
libpng (1.6.16)
libpng is the official PNG reference library. It supports
almost all PNG features.
Source: http://libpng.org/pub/png/libpng.html
libstbci-openssl.a (1.0.2g)
OpenSSL is an open source project that provides a
robust, commercial-grade, and full-featured toolkit
for the Transport Layer Security (TLS) and Secure
Sockets Layer (SSL) protocols. It is also a general-
purpose cryptography library.
Source: https://www.openssl.org
libjpeg (v9a)
Libjpeg is a widely used C library for reading and
writing JPEG image files.
Source: http://libjpeg.sourceforge.net/
libdirectfb (directfb-1.7-1 )
DirectFB is a thin library that provides hardware
graphics acceleration, input device handling and
abstraction, integrated windowing system with
support for translucent windows and multiple display
layers, not only on top of the Linux Framebuffer
Device.
It is a complete hardware abstraction layer with
software fallbacks for every graphics operation that is
not supported by the underlying hardware. DirectFB
adds graphical power to embedded systems and sets
a new standard for graphics under Linux.
Source: http://www.directfb.net
63
Index
A
Add Satellite 28
Advanced Picture Contrast Settings 41
Advanced Picture Settings 41
Antenna Connection 12
Audio Description 46
Audio Effects 46
Audio Language 45
Auto Clock Mode 45
Auto Volume Levelling 43
B
Bass 42
Batteries 5
C
CAM Operator Profile 44
CAM PIN 46
Change PIN Code 46
Channel, Channel Filter 32
Channel, Rename Channel 31
Channels 26
Child Lock 46
CI Card 20
Colour 41
Colour Enhancement 41
Colour Settings 41
Colour Temperature 41
Computer Connection 19
Computer Picture Setting 41
Connect Device 12
Consumer Care 3
Contact Info 3
Contrast 41
D
Date 45
Daylight Saving 45
Delta Volume 43
Digital Audio Out 17
Digital Out Delay 43
Digital Out Format 43
Digital Out Levelling 43
Digital Out Offset 43
Dynamic Contrast 41
E
EasyLink 15
End of Use 48
Energy Saving 44
F
Favourite Channels 32
G
Gamma 41
H
HDMI - CEC Connection 15
HDMI - DVI Connection 15
HDMI ARC 17
HDMI Connection 14
Headphone Connection 18
Headphone Volume 42
Hearing Impaired 46
Help Menu 3
Home Menu 40
I
Identify TV 3
Install Channel 26
Install Channel - Antenna 26
Install Channel - Cable 26
Install Channel - Satellite 28
L
Language Settings 45
M
Menu Language 45
Mixed Volume 46
MPEG Artefact Reduction 42
N
Noise Reduction 42
O
On-line User Manual 3
Optical 17
P
Philips Support 3
Picture Clean 42
Picture Contrast Mode 41
Picture Format 42
Picture Style 40
Picture, Colour 41
Picture, Contrast 41
Picture, Sharpness 41
Power Cable 10
Problems 54
Q
Quick Settings Menu 40
R
Re-install Satellite Channels 28
Register TV 3
Remote Control 5
Remote Control and Batteries 5
Remove Satellite 28
Rename Device 25
Reorder Channels 33
Repair 3
Reset TV Settings 44
S
Safety and Care 57
Satellite Channel List 29
Satellite Connection 13
Search Channels 32
Set PIN Code 46
Sharpness 41
Sleep Timer 45
Software Version 4
Sound Settings 42
Sound Style 42
64
Source List 25
Speakers or Headphones 46
Standby Mode 11
Subtitle Language 45
Super Resolution 42
Surround Sound 43
Switching On 11
T
Teletext 33
Text 33
Text Language 45
Time 45
Time Settings 45
Time Zone 45
Troubleshooting 54
TV placement 8
U
Universal Access 46
Update Satellite Channels 28
Update Software 4
Update Software - Local Updates 4
Update Software - OAD 4
USB Flash Drive 21
USB Hard Drive 21
USB Hard Drive, Format 44
User Manual 3
Utilities Menu 40
V
VGA Connection 19
Video Contrast 41
Videos, Photos and Music 38
Viewing Distance 8
W
Wall Mounting 8
65
