Table of Contents
- Contents
- 1 - Setting up
- 2 - Connect devices
- 3 - Switch on
- 4 - Remote control
- 5 - TV channels
- 6 - Channel installation - Antenna, Cable
- 7 - TV guide
- 8 - Sources
- 9 - Timers and clock
- 10 - Videos, Photos and Music
- 11 - Settings
- 12 - Specifications
- 13 - Software
- 14 - Troubleshooting and support
- 15 - Safety and care
- 16 - Terms of Use
- Index
Philips 43HFL3011T/12 User Manual
Displayed below is the user manual for 43HFL3011T/12 by Philips which is a product in the Hospitality TVs category. This manual has pages.
Related Manuals
Contents
1 Setting up 3
1.1 Read safety 3
1.2 TV stand and wall mounting 3
1.3 Tips on placement 3
1.4 Power cable 3
1.5 Antenna cable 3
2 Connect devices 5
2.1 About connections 5
2.2 Common interface - CAM 7
2.3 Set-top box - STB 8
2.4 Home Theatre System - HTS 8
2.5 Blu-ray Disc player 10
2.6 DVD player 10
2.7 Game console 10
2.8 USB flash drive 11
2.9 Camcorder 11
2.10 Computer 11
2.11 Headphones 12
3 Switch on 13
3.1 On, Standby or Off 13
3.2 Keys on TV 13
3.3 Sleep timer 13
3.4 Switch Off Timer 13
4 Remote control 15
4.1 Key overview 15
4.2 IR sensor 16
4.3 Batteries 16
4.4 Cleaning 16
5 TV channels 17
5.1 Channel Lists 17
5.2 Watching TV channels 17
6 Channel installation - Antenna, Cable
21
6.1 Update channels 21
6.2 Reinstall channels 21
6.3 DVB-T or DVB-C 21
7 TV guide 23
7.1 What you need 23
7.2 Using the TV guide 23
8 Sources 24
8.1 Switch to a device 24
8.2 From standby 24
8.3 EasyLink 24
9 Timers and clock 25
9.1 Sleep timer 25
9.2 Clock 25
9.3 Switch off timer 25
10 Videos, Photos and Music 26
10.1 From a USB connection 26
10.2 Play your videos 26
10.3 View your photos 26
10.4 Play your music 27
11 Settings 28
11.1 Picture 28
11.2 Sound 31
11.3 General settings 34
12 Specifications 37
12.1 Environmental 37
12.2 Reception 38
12.3 Display 38
12.4 Power 38
12.5 Dimensions and weights 39
12.6 Connectivity 39
12.7 Sound 39
12.8 Multimedia 39
13 Software 40
13.1 Software version 40
13.2 Open source software 40
13.3 Open source license 40
14 Troubleshooting and support 42
14.1 Troubleshooting 42
14.2 Register 43
14.3 Online help 43
14.4 Consumer Care / Repair 43
15 Safety and care 45
15.1 Safety 45
15.2 Screen care 46
16 Terms of Use 47
16.1 Terms of Use - TV 47
16.2 Copyrights 47
Index 49
2
1
Setting up
1.1
Read safety
Read the safety instructions first before you use the
TV.
1.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV
stand in the Quick Start Guide. The Quick Start Guide
can be downloaded from www.philips.com.
Use the product type number of the TV to look for the
Quick Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
To fix the bracket securely, use screws with a length
indicated in the drawing.
- 24HFL3011 - VESA MIS-F 75x75, M4 (Minimum 10
mm, Maximum 12 mm)
- 32HFL3011 - VESA MIS-F 100x100, M4 (Minimum 10
mm, Maximum 15 mm)
- 40HFL3011 - VESA MIS-F 200x200, M4 (Minimum
10 mm, Maximum 15 mm)
- 43HFL3011 - VESA MIS-F 200x200, M4 (Minimum
10 mm, Maximum 15 mm)
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TV's weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
1.3
Tips on placement
- Position the TV where light does not shine directly
on the screen.
- Position the TV up to 15 cm away from the wall.
- The ideal distance to watch TV is 3 times its
diagonal screen size. When seated, your eyes should
be level with the centre of the screen.
1.4
Power cable
- Insert the power cable into the POWER connector
on the back of the TV.
- Make sure the power cable is securely inserted in
the connector.
- Make sure that the power plug, in the wall socket, is
accessible at all times.
- When you unplug the power cable, always pull the
plug, never pull the cable.
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
3
1.5
Antenna cable
Insert the antenna plug firmly into the ANTENNA
socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
4
2
Connect devices
2.1
About connections
Connectivity guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a
good transfer of picture and sound.
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The
guide offers information on how to connect and
which cables to use.
Go to www.connectivityguide.philips.com
Antenna port
If you have a Set-top box (a digital receiver) or
Recorder, connect the antenna cables to run the
antenna signal through the Set-top box and/or
Recorder first before it enters the TV. In this way, the
antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI ports
HDMI quality
An HDMI connection has the best picture and sound
quality. Use an HDMI cable for TV signal.
For best signal quality transfer, use a High speed
HDMI cable and do not use an HDMI cable longer
than 5 m.
Copy protection
HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
Management).
HDMI ARC
HDMI 1 connection on the TV have HDMI ARC (Audio
Return Channel). If the device, typically a Home
Theatre System (HTS), also has the HDMI ARC
connection, connect it to HDMI 1 on this TV. With the
HDMI ARC connection, you do not need to connect
the extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
In case you prefer to switch off ARC on the HDMI
connections,
Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
Select Setup > TV
settings > Sound > Advanced > HDMI 1 -
ARC > Off .
HDMI Ultra HD
You can watch videos filmed or made in 'native' Ultra
HD resolution - 3840x2160 pixels - on this TV.
Connect a Blu-ray Disc player, game console or
computer that plays Ultra HD videos to one of
HDMI connections. Use a High speed HDMI cable to
connect. The HDMI UHD connections have ARC
(Audio Return Channel).
5
HDMI CEC - EasyLink
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.
Example HDMI CEC branding names are property of
their respective owners.
Operate devices
To operate a device connected to HDMI and set up
with EasyLink, select the device - or its activity - in
the list of TV connections.
Press / , select SOURCES , select a device
connected to an HDMI connection and press OK.
Once the device is selected, the TV remote control
can control the device.
However / and OPTIONS keys and
some other TV keys are not forwarded to the device.
If the key you need is not on the TV remote control,
you can select the key in the Options menu.
Press OPTIONS and select Controls in the
menu bar. On the screen, select the device key you
need and press OK.
Some very specific device keys might not be available
in the Controls menu.
Note: Only devices that support EasyLink Remote
Control function will respond to the TV remote
control.
EasyLink On or Off
The TV comes with all EasyLink settings switched on.
You can switch off any EasyLink setting
independently.
To switch off EasyLink completely . . .
Consumer Mode: On Not available in Consumer
mode.
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
EasyLink Remote Control
If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can switch off EasyLink remote control separately.
You can control multiple HDMI-CEC compliant
devices with your TV remote control.
In the EasyLink settings menu, select EasyLink
Remote Control and select No.
DVI to HDMI
If you still own a device that only has a DVI
connection, you can connect the device to any of
the HDMI connection with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use one of the HDMI connections
and add an Audio L/R cable (mini-jack 3.5mm) to
Audio In for sound, on the back of the TV.
6
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
Y Pb Pr - Audio L R
Y Pb Pr - Component Video is a high quality
connection.
The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals add
the Audio Left and Right signals for sound.
Match the YPbPr (green, blue, red) connector colours
with the cable plugs when you connect.
Use an Audio L/R cinch cable if your device also has
sound.
CVBS - Audio L R
CVBS - Composite Video is a high quality
connection. Next to the CVBS signal adds the Audio
Left and Right signals for sound.
Audio Out - Optical
Audio Out - Optical is a high quality sound
connection. This optical connection can carry 5.1
audio channels. If your device, typically a Home
Theatre System (HTS), has no HDMI ARC connection,
you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out -
Optical connection sends the sound from the TV to
the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theatre System.
If the sound does not match the video on screen, you
can adjust the audio to video synchronization.
2.2
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV
broadcasters in your region. These programmes are
scrambled by the TV broadcaster and descrambled
with a prepaid CI+ module.
Digital TV broadcasters provide this CI+ module
(Conditional Access Module - CAM) when you
subscribe to their premium programmes. These
programmes have a high level of copy protection.
Contact a digital TV broadcaster for more information
on terms and conditions.
CAM
Insert a CAM module
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion.
Incorrect insertion can damage the CAM and TV.
Use the Common Interface slot on the TV to insert the
CAM card.
7
With the front of the card facing to you, gently insert
the CAM as far as it will go.
Leave the card in the slot permanently.
It may take a few minutes before the CAM is
activated. Removing the CAM will deactivate the
broadcast service on TV.
If a CAM is inserted and subscription fees are paid,
(connection methods can differ), you can watch the
TV broadcast. The inserted CAM is exclusively for
your TV.
2.3
Set-top box - STB
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Auto switch off
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Do this to prevent
the TV from switching off automatically after a 4 hour
period without a key press on the remote control of
the TV.
Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
Select Setup > TV settings > General settings >
Switch off timer and set the slider bar to Off.
2.4
Home Theatre System - HTS
Connect with HDMI ARC
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
HDMI ARC
HDMI 1 connection on the TV have HDMI ARC (Audio
Return Channel). If the device, typically a Home
Theatre System (HTS), also has the HDMI ARC
connection, connect it to HDMI 1 on this TV. With the
HDMI ARC connection, you do not need to connect
the extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
Connect with HDMI
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
If the Home Theatre System has no HDMI ARC
connection, add an optical audio cable (Toslink) to
send the sound of the TV picture to the Home Theatre
System.
Audio to video synchronisation (sync)
8
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
Audio Out settings
Audio Out delay
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is automatically synchronised and
always correct.
Audio sync delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to video. On the HTS, increase the delay value until
there is a match between picture and sound. A delay
value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio Out delay on the
TV.
To switch off the Audio Out delay . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Advanced >
Audio out delay.
3. Select Off and press OK.
4. Press / , repeatedly if necessary, to close the
menu.
Audio Out offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 1ms. Maximum setting is 12ms. The Audio out
delay setting should be switched on.
To synchronise the sound on the TV . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV
settings > Sound > Advanced > Audio out offset.
3. Use the slider bar to set the sound offset and
press OK.
4. Press / , repeatedly if necessary, to close
the menu.
Audio Out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio out
format to Multichannel. With Multichannel, the TV can
send the compressed multichannel sound signal from
a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
To set the Audio Out format . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV
settings > Sound > Advanced > Audio out format.
3. Select Multichannel or Stereo.
4. Press / , repeatedly if necessary, to close
the menu.
Audio Out levelling
Use the Audio Out leveling setting to level the volume
(loudness) of the TV and the Home Theatre System
when you switch over from one to another. Volume
differences can be caused by differences in sound
processing.
To level the difference in volume . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV
settings > Sound > Advanced > Audio out
leveling.
3. If the volume difference is large, select More. If the
volume difference is small, select Less.
Press / , repeatedly if necessary, to close the
menu.
Audio Out leveling affects both the Audio Out -
Optical and HDMI ARC sound signals.
9
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive
or connected computer, the sound from your Home
Theatre System might be distorted.
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV
settings > Sound > Advanced > Audio out format.
No sound
If you cannot hear the sound from the TV on your
Home Theatre System, check the following . . .
- Check if you connected the HDMI cable to a HDMI
1 connection on the Home Theatre System.
- Check if the HDMI ARC setting on the TV is
switched On.
Go to...
Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
Select Setup > TV
settings > Sound > Advanced > HDMI 1 -ARC.
2.5
Blu-ray Disc player
Use a High speed HDMI cable to connect the Blu-ray
Disc player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC,
you can operate the player with the TV remote
control.
2.6
DVD player
Use an HDMI cable to connect the DVD player to the
TV.
If the DVD player is connected with HDMI and has
EasyLink CEC, you can operate the player with the TV
remote control.
2.7
Game console
HDMI
For best quality, connect the game console with an
High speed HDMI cable to the TV.
Y Pb Pr - Audio L R
Connect the game console with a component video
cable (Y Pb Pr) and an audio L/R cable to the TV.
10
CVBS - Audio L R
Connect the game console to the TV with a
composite cable (CVBS) and an audio L/R cable to
the TV.
Best Setting
Before you start playing a game from a connected
game console, we advice you to set the TV in the
ideal setting Game.
To set the TV to the ideal setting…
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV
settings > Picture > Advanced > Activity style.
3. Select Game, Computer or TV. The
setting TV returns to the picture settings for
watching TV.
4. Press / , repeatedly if necessary, to close
the menu.
2.8
USB flash drive
You can view photos or play your music and videos
from a connected USB flash drive.
Insert a USB flash drive in one of the USB
connections on the TV while the TV is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press / , select SOURCES , select USB and
press OK.
To stop watching the USB flash drive content, press
TV or select another activity.
To disconnect the USB flash drive, you can pull out
the flash drive anytime.
2.9
Camcorder
HDMI
For best quality, use an HDMI cable to connect the
camcorder to the TV.
CVBS - Audio L R
Use a Video Audio L/R cable to connect the
camcorder to the TV.
2.10
Computer
Connect
You can connect your computer to the TV and use
the TV as a PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the
TV.
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to
connect the PC to HDMI and an audio L/R cable
(minijack 3.5mm) to AUDIO IN L/R on the back of the
TV.
11
Best Setting
Ideal monitor setting
If your computer is added as a Computer type of
device in the Source menu (the list of connections),
the TV is set to the ideal Computer setting
automatically.
If you use your computer to watch movies or use it to
play games, you might want to set the TV back to the
ideal TV watching or gaming setting.
To set the TV to the ideal setting manually . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV
settings > Picture > Advanced > Activity style.
3. Select Game, Computer or TV. The
setting TV returns to the picture settings for
watching TV.
4. Press / , repeatedly if necessary, to close
the menu.
Remember to set the Game or computer setting back
to Computer when you stop playing the game.
2.11
Headphones
You can connect a set of headphones to
connection on the TV. The connection is a mini-jack
3.5mm. You can adjust the volume of the headphones
separately.
To adjust the volume . . .
Press SETTINGS on the remote control to access
quick settings, select Headphones volume, use
the (up) or (down) keys on remote control to
adjust the volume.
Or
Press volume key on your remote control, the
audio independent bar will appear. Press (left) or
(right) key on the remote control to select
Headphone. To adjust headphone volume, please
press + or - on the remote control.
12
3
Switch on
3.1
On, Standby or Off
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
To put the TV in Standby when the indicator light is
off, press the small joystick key on the back of the TV.
The indicator will light up.
With the TV in standby, press on the remote
control to switch the TV on.
Switch to standby
To switch the TV to Standby, press on the remote
control.
Switch Off
The TV is still connected to the mains power but
consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
3.2
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…
1. With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2. Press left or right to
select Volume, Channel or Source.
3. Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection.
4. The menu will disappear automatically.
To switch the TV off, select and press the joystick
key.
3.3
Sleep timer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings / General
settings > General settings > Sleep timer.
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press / , repeatedly if necessary, to close
the menu.
3.4
Switch Off Timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer …
13
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Seutp > TV settings > General
settings > Switch off timer.
3. Press (up) or (down) to adjust the
value. The value 0 deactivates the automatic switch
off.
4. Press / , repeatedly if necessary, to close
the menu.
14
4
Remote control
4.1
Key overview
Top
1 - Standby / On
To switch the TV on or back to Standby.
2 - ALARM
To set the alarm.
3 - Playback keys
- Rewind , to rewind.
- Play , to playback.
- Pause , to pause playback.
- Fast forward , to go fast forward.
4 - LIST
To open the channel list.
5 - Playback key
- Stop , to stop playback.
6 - SLEEP
To open the Sleep Timer list.
7 - MY CHOICE
To switch on mychoice.
8 - TV GUIDE
To open or close the TV Guide.
Middle
1 - SMART INFO
To open the smart information page.
2 - Colour keys
Direct selection of options. Blue key , opens Help.
3 - INFO
To open or close programme info.
4 - BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
To go back to the previous App/Internet page.
5 - HOME
To open the Home menu.
6 - SETTINGS
To open the Quick settings menu.
7 - OPTIONS
To open or close the Options menu.
8 - OK key
To confirm a selection or setting.
9 - Arrow / navigation keys
To navigate up, down, left or right.
10 - TV / EXIT
To switch back to watching TV. To leave an interactive
TV application.
Bottom
15
1 - Volume
To adjust the volume level.
2 - Number keys
To select a channel directly.
3 - SUBTITLE
To switch Subtitles on, off or on during mute.
4 - CLOCK
To display the clock.
5 - Channel
To switch to the next or previous channel in the
channel list. To open the next or previous page
in Text/Teletext. To start the next or previous chapter
on a disc.
6 - Mute
To mute the sound or to restore it.
7 - TEXT
To open or close Text/Teletext.
4.2
IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
4.3
Batteries
1. Slide the battery door in the direction shown by the
arrow.
2. Replace the old batteries with 2
type AAA-LR03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3. Reposition the battery door.
4. Slide it back until it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
4.4
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
16
5
TV channels
5.1
Channel Lists
About channel lists
After a channel installation, all channels appear on
the channel list. Channels are shown with their name
if this information is available.
With a channel list selected, press the
arrows (up), (down), (left) and (right) to
select a channel, then press OK to watch the
selected channel. You only tune to the channels in
that list when using or / P or P
keys.
Channel icons
After an Automatic Channel Update of the channel
list, newly found channels are marked with
a (star).
If you lock a channel, it will be marked with
a (lock).
Radio stations
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel. A
Cable (DVB-C) channel installation usually places
radio stations from channel number 1001 onwards.
Open a channel list
To open the current channel list…
1. Press TV, to switch to TV.
2. Press LIST to open the current channel list.
3. Press LIST again to close the channel list.
5.2
Watching TV channels
Watching channels
Tune to a channel
To watch TV channels, press . The TV tunes to the
TV channel you last watched.
Switch channels
- To switch channels, press or .
- If you know the channel number, type in the
number with the number keys. Press OK after you
entered the number to switch immediately.
Previous channel
- To switch back to the previously tuned channel,
press .
Channel list
While watching a TV channel, press LIST to open
the channel lists.
The channel list can have several pages with
channels. To view the next or previous page,
press + or .
To close the channel lists without switching channel,
press LIST again.
Radio channels
If digital broadcasting is available, digital radio station
are installed during installation. Switch to a radio
channel just like you switch to a TV channel.
Channel options
Open options
While watching a channel, you can set some options.
Depending on the type of channel you are watching
(analogue or digital) or depending on the TV settings
you made, some options are available.
To open the options menu…
1. While watching a channel, press OPTIONS.
2. Press OPTIONS again to close.
Subtitles and subtitle language
Switch On
To switch on Subtitles, press SUBTITLE.
You can set subtitles to Subtitles off, Subtitles
on, or Automatic.
Automatic
If language information is part of the digital broadcast
and the broadcasted programme is not in your
language (the language set on TV), the TV can show
subtitles automatically in one of your preferred
subtitle languages. One of these subtitle languages
must also be part of the broadcast.
You can select your preferred subtitle languages
in Subtitle Language.
17
Preferred subtitle languages
Subtitles for digital channels
There is no need to set subtitles in Text for digital
channels.
Digital channels can offer several subtitle languages
for a programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of
these languages are available, the TV will show them.
If none of the preferred subtitle languages are
available, you can select another subtitle language
which is available.
To set the primary and secondary subtitle
language...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > Channel settings and select
Languages.
3. Select Primary subtitles or Secondary subtitles and
press OK.
4. Select a language and press OK.
5. Press / , repeatedly if necessary, to close the
menu.
Select a subtitle language
If none of the preferred subtitle languages are
available, you can select another subtitle language if
available. If no subtitle languages are available, you
cannot select this option.
To select a subtitle language when none of your
preferred languages are available…
1. Press OPTIONS.
2. Select Subtitle language and select one of the
languages as subtitles temporarily.
Subtitles for analogue channels
For analogue channels, you need to make the
subtitles available for each channel manually.
1. Switch to a channel and press TEXT to open Text.
2. Enter the page number for subtitles, usually 888.
3. Press TEXT again, to close Text.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open Status in the Options menu.
Audio language
Preferred audio language
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to this audio.
If none of the preferred audio languages is available,
you can select another audio language which is
available.
To set the primary and secondary audio language...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > Channel settings and select
Languages.
3. Select Primary audio or Secondary audio and press
OK.
4. Select a language and press OK.
5. Press / , repeatedly if necessary, to close the
menu.
Select an audio language
To select an audio language when none of your
preferred audio language is available...
1. Press OPTIONS .
2. Select Audio language and select an audio
language you want temporarily and press OK.
Audio languages for the hearing and visually
impaired
Some digital TV channels broadcast special audio and
subtitles adapted for people who are hearing or
visually impaired.
Video selection
Digital TV channels can offer multi video signals
(multifeed broadcast), different camera viewpoints or
angles of the same event or different programmes on
one TV channel. The TV shows a message if any such
TV channels are available.
Dual I-II
If an audio signal contains two audio languages but
one language — or both — has no language
indication, this option is available.
18
Common Interface
If prepaid premium content is available from a CAM,
you can set the provider settings with this option.
Status
Select Status to view technical information on the
channel (if it is analogue or digital) or a connected
device you are watching.
Favourite channels
About favourite channels
You can create a favourite channel list that only holds
the channels you want to watch. With the Favourite
channel list selected, you will only see your favourite
channels when you switch through channels.
Create a favourites list
1. While watching a TV channel, press LIST to
open the channel list.
2. Select All to view all channels.
3. Select the channel, and press (yellow) to mark
as favourite.
4. The selected channel is marked with a .
5. To finish, press / . The channels are added to
the Favourites list.
To remove a channel from the favourites list, select
the channel with , then press (yellow) again to
unmark as favourite.
Rename channels
You can rename channels in the channel list.
1. Select the channel you want to rename in one of
the channel lists.
2. Press (red).
3. You can enter text with the the on-screen
keyboard.
Text / Teletext
Text pages
To open Text (Teletext) while you are watching TV
channels, press TEXT.
To close Text, press TEXT again.
Select a Text page
To select a page...
1. Enter the page number with the number keys.
2. Use the arrow keys to navigate.
3. Press a colour key to select a colour-coded subject
at the bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text, press
OPTIONS and select T.O.P. overview.
Favourite pages
The TV makes a list of the last 10 Text pages you
opened. You can easily reopen them again in the
Favourite Text pages column.
1. In Text, select the star in the top left corner of the
screen to show the column of favourite pages.
2. Press (down) or (up) to select a page number
and press OK to open the page.
You can clear the list with the option Clear favourite
pages.
Search Text
You can select a word and scan Text for all
occurences of this word.
1. Open a Text page and press OK.
2. Select a word or number with the arrow keys.
3. Press OK again to jump immediately to the next
occurence of this word or number.
4. Press OK again to jump to the subsequent
occurence.
5. To stop searching, press (up) until nothing is
selected.
Text from a connected device
Some devices that receive TV channels can also offer
Text.
To open Text from a connected device...
1. Press / , select the device and press OK.
2. While watching a channel on the device, press
OPTIONS, select Show device keys and select the
key and press OK.
3. Press / to hide the device keys.
4. To close Text, press / again.
Digital Text (UK only)
Some digital broadcasters offer dedicated Digital Text
or interactive TV on their digital TV channels. This
includes normal Text using the number, colour and
arrow keys to select and navigate.
To close Digital Text, press / .
19
Text options
In Text, press OPTIONS to select the following . . .
- Freeze page / Unfreeze page
To stop the automatic rotation of subpages.
- Dual screen / Full screen
To show the TV channel and Text alongside each
other.
- T.O.P. overview
To open T.O.P. Text.
- Enlarge / Normal view
To enlarge the Text page for comfortable reading.
- Reveal
To unhide hidden information on a page.
- Cycle subpages
To cycle subpages when these are available.
- Language
To switch the group of characters that Text uses to
display correctly.
- Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text setup
Text language
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > Channel settings > Languages.
3. Select Primary Teletext or Secondary Teletext.
4. Select your preferred Text languages.
5. Press / , repeatedly if necessary, to close
the menu.
Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5 . . .
1. Press TEXT.
2. While watching the teletext, press OPTIONS.
3. Select Text 2.5 > Off.
4.Press / , repeatedly if necessary, to close the
menu.
20
6
Channel installation
- Antenna, Cable
6.1
Update channels
Automatic update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list. Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
To switch off the message at start up . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > Channel settings > Channel
settings and press OK.
3. Select Channel update message > Off.
To switch off the Automatic channel update . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > Channel settings > Channel
settings and press OK.
3. Select Automatic channel update > Off.
Start an update
To start an update yourself . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Search for channels and press OK.
3. Select Update channels and follow the instructions
on screen. The update may take a few minutes.
In certain countries, the Automatic channel update is
done while watching TV or any moment when the TV
is in standby.
6.2
Reinstall channels
Reinstall All Channels
You can reinstall all channels and leave all other TV
settings untouched.
If a PIN code is set, you will need to enter this code
before you can reinstall channels.
To reinstall channels…
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Search for channels > Re-install
Channels follow the instructions on screen. The
update may take a few minutes.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General
settings > Reinstall TV and press OK. The
installation may take a few minutes. Follow the
instructions on screen.
6.3
DVB-T or DVB-C
21
DVB-T or DVB-C reception
DVB Settings
Access DVB settings
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Search for channels and press OK.
3. Select Re-install Channels.
4. Select the country where you install this TV.
5. Select Cable (DVB-C).
6. Select Start to search channels, or select Settings
for DVB-C settings.
7. Press / , repeatedly if necessary, to close the
menu.
Symbol rate mode
If your cable provider did not give you a specific
symbol rate value to install the TV channels, leave the
Symbol rate mode setting on Automatic.
If you received a specific symbol rate value, select
Manual. However, the value you received could be in
the predefined list of symbol rates already. Select
Predefined symbol rates to check if your value is
available automatically.
Symbol rate
With the Symbol rate mode set to Manual, you can
enter the symbol rate value you received from your
cable provider. To enter the value, use the number
keys.
Network frequency
With Frequency scan set to Quick or Advanced, you
can enter here the network frequency value received
from your cable provider. To enter the value, use the
number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster Quick scan method and use the
predefined settings used by most cable providers in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full scan method. This method will take
more time to search for and install channels.
Network ID
With Frequency scan set to Quick, you can enter here
the network ID value received from your cable
provider. To enter the value, use the number keys.
Digital channels
If you know your cable provider is not offering digital
channels, you can skip searching for digital
channels. Select Off.
Analogue channels
If you know your cable provider is not offering
analogue channels, you can skip searching for
analogue channels. Select Off.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free channels
only.
22
7
TV guide
7.1
What you need
With the TV guide you can view a list of the current
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
guide information.
The TV can collect TV guide information for the
channels that are installed on the TV (e.g the
channels you watch with Watch TV). The TV cannot
collect the TV guide information for channels viewed
from a digital receiver.
7.2
Using the TV guide
Open the TV guide
To open the TV guide, press TV GUIDE.
Press TV GUIDE again to close.
The first time you open the TV guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV guide data is stored in the
TV.
Tune to a programme
Switch to a programme
From the TV guide, you can switch to a current
programme.
To select a programme, use the arrow keys to
highlight the programme name.
Navigate to the right to view programmes scheduled
later that day.
To switch to the programme (channel), select the
programme and press OK.
View programme details
To call up the details of the selected programme,
press INFO .
Change day
The TV guide can show scheduled programmes for
the upcoming days (maximum up to 8 days).
If the TV guide information comes from the
broadcaster, you can press + to view the schedule
of one of the next days. Press to go back to the
previous day.
Alternatively, you can press OPTIONS and select
Change day.
Select Previous day, Today or Next day and press
OK, to select the day of the schedule.
Set a reminder
You can set a reminder for a programme. A message
will alert you at the start of the programme. You can
tune to this channel immediately.
In the TV Guide a programme with a reminder is
marked with a (clock).
To set a reminder…
1. Press TV GUIDE and select an upcoming
programme.
2. Press OPTIONS.
3. Select Set reminder and press OK.
To clear a reminder…
1. Press TV GUIDE and select a programme with
the reminder.
2. Press OPTIONS.
3. Select Clear reminder and press OK.
Search by genre
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
etc.
To search for programmes by genre, press
OPTIONS and select Search by genre.
Select a genre and press OK. A list with the found
programmes appears.
23
8
Sources
8.1
Switch to a device
In the list of connections - the Source menu - you can
find the devices connected to the TV. From this
Source menu, you can switch to a device.
Sources menu
To open the Sources menu, press / , then
select SOURCES .
To switch to a connected device, select the device
with the arrows (left) or (right) and press OK.
To close the Source menu without switching to a
device, select SOURCES again.
8.2
From standby
With the TV in standby, you can switch on a
connected device with your TV remote control.
Play
To switch on both disc player and TV from standby
and start playing the disc or programme immediately,
press (play) on the TV remote control.
The device should be connected with an HDMI cable
and both TV and device must have HDMI CEC
switched on.
Home Theatre System
You can switch on your Home Theatre System to
listen to an audio disc or a radio channel and leave
the TV in standby.
To only switch on the HTS, with the TV in standby,
press / on the TV remote control, then
select SOURCES.
8.3
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
to communicate with the connected devices. Devices
must support HDMI CEC and must be connected with
an HDMI connection.
24
9
Timers and clock
9.1
Sleep timer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General
settings > Sleep timer.
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press / , repeatedly if necessary, to close
the menu.
9.2
Clock
To know what time it is, press CLOCK on the
remote control to find the time on TV screen.
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
To correct the TV clock...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Clock > Auto clock mode and select Country
dependent.
9.3
Switch off timer
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no input signal
nor remote control commands for 10 minutes, the TV
switches off automatically to save energy.
If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-top box - STB) and you
do not use the remote control of the TV, you should
deactivate the automatic switch off.
To deactivate the Switch off timer...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Switch off timer and set the slider bar to 0 (Off).
3. Press / , repeatedly if necessary, to close the
menu.
25
10
Videos, Photos and
Music
10.1
From a USB connection
You can view your photos or play your music and
videos from a connected USB flash drive or USB
Hard Drive.
With the TV switched on, plug in a USB flash drive or a
USB Hard Drive to one of the USB connections. The
TV detects the device and will list your media files.
If the list of files does not appear automatically...
1. Press / , then select SOURCES, select
USB and press OK.
2. Select USB Devices and press (right) to select
the USB device you need.
You can browse your files in the folder structure you
have organised on the drive.
To stop playing videos, photos and music, press TV.
Warning
If you try to pause or record a programme with a USB
Hard Drive connected, the TV will ask you to format
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive.
10.2
Play your videos
Play videos
How you open the list of your media files on TV
depends on the type of device where the files
are stored. See the chapters above.
To play a video on TV...
Select Videos, and select the file name and press
OK.
- To pause the video, press OK. Press OK again to
continue.
- To rewind or go fast forward, press or . Press
the keys several times to speed up - 2x, 4x, 8x,
16x, 32x.
- To jump to the next video in a folder, press OK to
pause and select on screen and press OK.
- To stop the video playback, press (Stop).
- To go back to the folder, press / .
Progress Bar
To show the progress bar when a video is playing
(playhead position, duration, title, date, etc.), press
INFO.
Press again to hide the info.
Video options
During the video playback, press OPTIONS to...
- Subtitles
Display the subtitles if available.
- Audio language
Play the audio language if available.
- Repeat, Play once
Play videos repeatedly or once.
- Shuffle on, Shuffle off
Play videos in sequence or at random.
- Show info
Display the file name.
- Subtitle settings
Set subtitle colour and position if available.
10.3
View your photos
View photos
How you open the list of your media files on TV
depends on the type of device where the files
are stored. See the chapters above.
To view all photos on TV...
Select Photos, and select All and press OK.
To view a photo on TV...
Select Photos, and select the file name and press
OK.
To start a slide show on TV...
If there are several photos in a folder, you can start a
slide show.
To start a slide show...
1. Select the folder with photos.
2. Press the colour key Slide Show.
- To jump to the next or previous photo, press (right
- next) or (left - previous).
- To pause the slide show, press OK. To start again,
press OK again.
- To stop the slide show, press OK and press / .
Info
To view info on a photo (size, creation date, file path,
etc.), select a photo and press INFO. Press again to
hide the info.
26
Slideshow with music
You can watch a slideshow of your photos and listen
to your music at the same time. You must start the
music before you start the photo slideshow.
To play music with the slide show...
1. Select a song or a folder with songs and press OK.
2. Press INFO to hide file info and progress bar.
3. Press / .
4. Now use the navigation arrows to select the folder
with photos.
5. Select the folder with photos and press Slide
Show.
6. To stop the slideshow, press / .
Photo options
With a photo on screen, press OPTIONS to…
- Start slideshow, Stop slideshow
Start or stop slideshow.
- Slideshow transitions
Set the transition from one picture to the next.
- Slideshow frequency
Select the display time for each photo.
- Repeat, Play once
View the pictures repeatedly or once only.
- Shuffle off, Shuffle on
View the pictures in sequential order, or at random.
- Rotate image
Rotate photo.
- Show info
Display the picture name, date, size and next picture
in the slide show.
- Stop music
Stop the music playing in the background.
10.4
Play your music
Play music
How you open the list of your media files on TV
depends on the type of device where the files
are stored. See the chapters above.
To play a song on TV...
Select Music , and select the file name and press
OK.
If there are several songs in a folder, you can listen to
them one after the other.
- To pause a song, press OK. Press OK again to
continue.
- To rewind or go fast forward, press or . Press
the keys several times to speed up - 2x, 4x, 8x,
16x, 32x.
- To jump to the next song in a folder, press OK to
pause and select on screen and press OK.
- To go back to the folder, press / , the music
will keep on playing.
- To stop the music playback, press (Stop).
Progress Bar
To show the progress bar when a song is playing
(playhead position, duration, title, date, etc.), press
INFO. Press again to hide the info.
Music options
Options for playing music...
- Stop playback
Stop music play.
- Repeat, Play once
Play songs repeatedly or once.
- Shuffle on, Shuffle off
Play songs in sequence or at random.
- Show info
Display the file name.
27
11
Settings
11.1
Picture
Picture style
Select a style
For easy picture adjustment, you can select a preset
Picture Style.
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings / General settings >
Picture > Picture style, and select one of the styles in
the list.
3. Select a style and press OK.
The available Picture styles are...
- Personal - The picture preferences you set during
the first start up.
- Vivid - Ideal for daylight viewing
- Natural - Natural picture settings
- Standard - Most energy conscious setting - Factory
setting
- Movie - Ideal for watching movies
- Photo - Ideal for viewing photos
- Energy saving - ideal for energy saving
Customise a style
Any picture setting you adjust, like Colour or Contrast,
is stored in the currently selected Picture style.
It allows you to customise each style.
Restore a style
The selected style will store the changes you made.
We recommend to adjust the picture settings for the
style Personal only. The Picture style - Personal can
save its settings for each individual connected device
in Sources menu.
To restore the style to its original setting...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings / General settings >
Picture > Restore style, and select the Picture Style
you want to restore.
3. Press OK. The style is restored.
Home or Shop
If the Picture style is switched back to Vivid every
time you switch on the TV, the TV location is set to
Shop. A setting meant for in-store promotion.
To set the TV for Home use…
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Location and press OK.
3. Select Home and press OK.
4. Press / , repeatedly if necessary, to close the
menu.
Picture settings
Colour
With Colour, you can adjust the colour saturation of
the picture.
To adjust the colour...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings / General settings >
Picture > Colour.
3. Press (right) and adjust the value with (up) or
(down).
4. Press / , repeatedly if necessary, to close the
menu.
Contrast
With Contrast, you can adjust the brightness of the
display backlight.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings / General settings >
Picture > Contrast.
3. Press (right) and adjust the value with (up) or
(down).
4. Press / , repeatedly if necessary, to close the
menu.
28
Sharpness
With Sharpness, you can adjust the level of sharpness
in fine detail of the picture.
To adjust the sharpness...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings / General settings >
Picture > Sharpness.
3. Press (right) and adjust the value with (up) or
(down).
4. Press / , repeatedly if necessary, to close the
menu.
Advanced picture settings
Game or computer
When you connect a device, the TV recognizes its
type and gives each device a correct type name.
You can change the type name if you wish. If a
correct type name for a device is set, the TV
automatically switches to the ideal TV settings when
you switch to this device in the Sources menu.
If you have a game console with a built-in Blu-ray
Disc player, you might have set the type name to
Bluray Disc. With Activity style you can switch to the
ideal settings for gaming manually. Don't forget
to switch to TV, when you return to watch TV.
To switch the setting manually...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Activity style.
3. Select Game, Computer or TV. The setting TV
returns to the picture settings for watching TV.
4. Press / , repeatedly if necessary, to close the
menu.
Colour settings
Colour enhancement
With Colour enhancement, you can enhance the
colour intensity and the details in bright colours.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available
in Guest Menu.
(For professional mode information, please refer
to Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Colour.
3. Select Colour enhancement and press OK.
4. Select Maximum, Medium, Minimum or Off.
5. Press / , repeatedly if necessary, to close
the menu.
Colour temperature
With Colour temperature, you can set the picture to a
preset colour temperature or select Custom to set a
temperature setting yourself with Custom colour
temperature. Colour temperature and Custom
colour temperature are settings intended for expert
users.
To select a preset...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Colour.
3. Select Colour Temperature and press OK.
4. Select Normal, Warm or Cool. Or select Custom if
you want to customise a colour temperature yourself.
5. Press / , repeatedly if necessary, to close the
menu.
Custom colour temperature
With Custom colour temperature, you can set a
colour temperature yourself. To set a custom
colour temperature, first select Custom in the Colour
temperature menu. Custom colour temperature is a
setting intended for expert users.
To set a custom colour temperature...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Colour.
3. Select Custom Colour Temperature and press OK.
4. Press the arrows (up) or (down) to adjust the
value. WP is white point and BL is black level. You can
also select one of the presets in this menu.
5. Press / , repeatedly if necessary, to close the
menu.
29
Contrast settings
Contrast modes
With Contrast Mode, you can set the level at which
power consumption can be reduced by dimming
the intensity of the screen. Choose for the best
power consumption or for the picture with the best
intensity.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Contrast > Contrast mode.
3. Select Standard, Best power, Best picture, or Off.
4. Press / , repeatedly if necessary, to close the
menu.
Dynamic contrast
With Dynamic Contrast, you can set the level at which
the TV automatically enhances the details in the dark,
middle and light areas of the picture.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Contrast > Dynamic contrast.
3. Select Maximum, Medium, Minimum or Off.
4. Press / , repeatedly if necessary, to close the
menu.
Brightness
With Brightness, you can set the level of brightness of
the picture signal. Brightness is a setting intended for
expert users. We recommend non-expert users to
adjust the brightness of the picture with the Contrast
setting.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Contrast > Brightness.
3. Press (right) and adjust the value with (up) or
(down).
4. Press / , repeatedly if necessary, to close
the menu.
Video contrast
With Video Contrast, you can decrease the range of
the video contrast.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Contrast > Video contrast.
3. Press (right) and adjust the value with (up) or
(down).
4. Press / , repeatedly if necessary, to close the
menu.
Gamma
With Gamma, you can set a non-linear setting for
picture luminance and contrast. Gamma is a
setting intended for expert users.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Contrast > Gamma.
3. Press (right) and adjust the value with (up) or
(down).
4. Press / , repeatedly if necessary, to close the
menu.
Sharpness settings
Super resolution
With Super resolution, you switch on a superior
sharpness in line edges and contours.
To switch on or off...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer
to Installation manual)
2. Select Setup > TV settings > Picture > Advanced
> Sharpness > Super resolution.
3. Select On or Off.
4. Press / , repeatedly if necessary, to close
30
the menu.
Noise reduction
With Noise reduction, you can filter out and reduce
the level of image noise.
To adjust the noise reduction...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Sharpness > Noise reduction.
3. Select Maximum, Medium, Minimum or Off.
4. Press / , repeatedly if necessary, to close the
menu.
MPEG artefact reduction
With MPEG artefact reduction, you can smoothen the
digital transitions in the picture. MPEG artefacts are
mostly visible as small blocks or jagged edges in
images.
To reduce the MPEG artefacts...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Advanced >
Sharpness > MPEG artefact reduction.
3. Select On or Off.
4. Press / , repeatedly if necessary, to close the
menu.
Format and edges
Picture format
If black bars appear on top and bottom or on both
sides of the picture, you can adjust the picture
format to a format that fills the screen.
To change the picture format...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer
to Installation manual)
2. Select Setup > TV settings / General settings >
Picture > Format and edges > Picture format .
3. Select a format from the list and press OK.
4. Press / , repeatedly if necessary, to close
the menu.
Screen edges
With Screen edges, you can slightly enlarge the
picture to hide distorted edges.
To adjust the edges...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Format and
edges > Screen edges.
3. Adjust the value with (up) or (down).
4. Press / , repeatedly if necessary, to close the
menu.
Picture shift
With Picture shift, you can slightly move the position
of the picture.
To move the picture...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Picture > Format and
edges > Picture shift.
3. Adjust the position with (up), (down), (right),
or (left).
4. Press / , repeatedly if necessary, to close the
menu.
11.2
Sound
Sound style
Select a style
For easy sound adjustment, you can select a preset
setting with Sound style.
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer to
Installation manual)
31
2. Select Setup > TV settings / General settings >
Sound > Sound style, and select one of the styles in
the list.
3. Select a style and press OK.
The available Sound styles are...
- Personal - The sound preferences you set during
the first start up.
- Original - Most neutral sound setting
- Movie - Ideal for watching movies
- Music - Ideal for listening to music
- Game - Ideal for gaming
- News - IIdeal for speech
Restore a style
The selected style will store the changes you made.
We recommend to adjust the sound settings for
the style Personal only. The Sound Style - Personal
can save its settings for each individual connected
device in Sources menu.
To restore the style to its original setting...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Press / .
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings / General settings >
Sound > Restore style.
Sound settings
Bass
With Bass, you can adjust the level of low tones in the
sound.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Bass.
3. Press (right) and adjust the value with (up) or
(down).
4. Press / , repeatedly if necessary, to close
the menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Treble.
3. Press (right) and adjust the value with (up) or
(down).
4. Press / , repeatedly if necessary, to close the
menu.
Surround mode
With Surround mode, you can set the sound effect of
the TV speakers.
To set the surround mode...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Surround
mode.
3. Press (right) and select Stereo or Incredible
surround.
4. Press / , repeatedly if necessary, to close the
menu.
Headphones volume
With Headphones volume, you can set the volume of
a connected headphones separately.
To adjust the volume...
Press SETTINGS on the remote control to access
quick settings, select Headphones volume, use
the (up) or (down) keys on remote control to
adjust the volume.
Or
Press volume key on your remote control, the
audio independent bar will appear. Press (left) or
(right) key on the remote control to select
Headphone. To adjust headphone volume, please
press + or - on the remote control.
Advanced sound settings
Auto volume levelling
With Auto volume leveling, you can set the TV to
automatically level out sudden volume
differences. Typically at the beginning of adverts or
when you are switching channels.
To switch on or off...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
32
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Advanced >
Auto volume leveling.
3. Press (right) and select On or Off.
4. Press / , repeatedly if necessary, to close the
menu.
TV speakers
You can send the TV sound to a connected audio
device - a Home Theatre System or audio
system. With TV speakers, you select where you
want to hear the TV sound and how you want to
control it.
- If you select Off, you permanently switch off the TV
speakers.
- If you select On, the TV speakers are always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
- If you select EasyLink, the TV sends the TV sound to
the audio device. The TV will switch off the
TV speakers when the device is playing the sound.
- If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you
can still switch to TV speakers or device speakers in
the Picture and sound menu.
To set the TV speakers...
Consumer Mode: On Not available in this mode.
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
Clear sound
With Clear Sound, you improve the sound for speech.
Ideal for news programmes.
You can switch the speech improvement on or off.
To switch on or off...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Advanced >
Clear Sound.
3. Press (right) and select On or Off.
4. Press / , repeatedly if necessary, to close the
menu.
HDMI 1-ARC
If you do not need an Audio Return Channel (ARC) on
any of the HDMI connections, you can switch the ARC
signal off.
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Advanced >
HDMI 1 - ARC.
3. Press (right) and select On or Off.
4. Press / , repeatedly if necessary, to close the
menu.
Audio out format
With Audio out format you can set the audio out
signal of the TV to fit the sound processing
capabilities of your Home Theatre System.
To set Audio out format...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Advanced >
Audio out format.
3. Press (right) and select Multichannel or Stereo.
4. Press / , repeatedly if necessary, to close the
menu.
Audio out levelling
With Audio out levelling you can level the sound
volume of the Home Theatre System with the volume
of the TV when you switch over from one to another.
To level the difference in volume...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available
in Guest Menu.
(For professional mode information, please refer
to Installation manual)
2. Select Setup > TV settings > Sound > Advanced >
Audio out levelling .
3. Select More, Medium, or Less, then press OK.
4. If the volume difference is large, select More. If the
volume difference is small, select Less.
5. Press / , repeatedly if necessary, to close
the menu.
33
Audio out delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the
picture, you must switch off Audio out delay on the
TV.
To switch off Audio out delay...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Advanced >
Audio out delay.
3. Press (right) and select Off or On.
4. Press / , repeatedly if necessary, to close the
menu.
Audio out offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with Audio
out offset .
To synchronise the sound on the TV...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Sound > Advanced >
Audio out offset.
3. Use the slider bar to set the sound offset and press
OK.
4. Press / , repeatedly if necessary, to close the
menu.
11.3
General settings
Menu language
To change the language of the TV menus and
messages...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Region and
Language > Menu language.
3. Select on the language you need.
4. Press / , repeatedly if necessary, to close the
menu.
Clock
Date and Time
Automatic
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information.
The daylight saving change might be ignored and the
TV might show an incorrect time.
When you record programmes - scheduled in the TV
Guide, we recommend not to change the time
and date manually. In some countries, for some
network operators, the Clock setting is hidden to
avoid an incorrect clock setting.
To correct the TV clock automatically...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Clock > Auto Clock Mode, and select Country
dependent.
3. Select Daylight saving and select the appropriate
setting.
4. Press / , repeatedly if necessary, to close the
menu.
Manual
To set the TV clock manually...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Clock > Auto Clock Mode, and select Manual.
3. Select Date and Time to adjust.
4. Press / , repeatedly if necessary, to close
the menu.
Time zone
To set the time zone...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Clock > Time zone.
3. Select one of the time zones.
4. Press / , repeatedly if necessary, to close the
34
menu.
Sleep timer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Sleep timer.
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to
0 minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the
time during the countdown.
3. Press / , repeatedly if necessary, to close
the menu.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period,
the TV switches off automatically to save energy.
Also, if the TV does not receive a TV signal nor a
remote control command for 10 minutes, the TV
switches off automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch off timer...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Switch off timer.
3. Select inside the slider bar to adjust the value. The
value 0 (Off) deactivates the automatic switch off.
4. Press / , repeatedly if necessary, to close the
menu.
Location
To set the TV for Home use...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Location and press OK.
3. Select Home and press OK.
4. Press / , repeatedly if necessary, to close the
menu.
TV placement
As part of the first installation, this setting is set to
either On a TV stand or On the Wall. If you
have changed the placement of the TV since then,
adjust this setting accordingly for best sound
reproduction.
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings > TV
Placement and press OK.
3. Select On a TV stand or On the Wall.
4. Press / , repeatedly if necessary, to close the
menu.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Factory Settings and press OK.
3. Press / , repeatedly if necessary, to close
the menu.
35
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > General settings >
Reinstall TV and press OK.
3. Follow the instructions on screen. The installation
may take a few minutes.
36
12
Specifications
12.1
Environmental
Saving energy
The Eco settings bundle the settings that help the
environment.
While you are watching TV channels, press to open
Eco settings.
Press again to close Eco settings.
Energy saving
This Picture style sets the picture, in the most ideal
energy conscious setting.
Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
Select Screen off and press OK. To switch the screen
back on, press any key on the remote control.
Auto switch off
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no signal for 10
minutes, the TV switches off automatically to save
energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, deactivate the
automatic switch off.
In addition to the Eco settings, your TV also has
environmentally friendly technology with regard to
power consumption.
Inactive devices off
Switch off connected EasyLink HDMI-CEC (Consumer
Electronic Control) compliant devices that
are inactive.
European energy label
The European Energy Label informs you on the
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the
lower the energy it consumes.
On the label, you can find the energy efficiency class,
the average power consumption of this product in use
and the average energy consumption for 1 year. You
can also find the power consumption values for this
product on the Philips website for your country
at www.philips.com/TV
Product Fiche
24HFL3011
• Energy Efficiency Class : A+
• Visible Screen Size : 60 cm / 24 inch
• On Mode Power Consumption (W) : 19 W
• Annual Energy Consumption (kWh) * : 28 kWh
• Standby Power Consumption (W) **: 0.50 W
• Display Resolution (Pixels) : 1366 x 768p
32HFL3011
• Energy Efficiency Class : A+
• Visible Screen Size : 80 cm / 32 inch
• On Mode Power Consumption (W) : 31 W
• Annual Energy Consumption (kWh) * : 45 kWh
• Standby Power Consumption (W) ** : 0.50 W
• Display Resolution (Pixels) : 1366 x 768p
40HFL3011
• Energy Efficiency Class : A+
• Visible Screen Size : 102 cm / 40 inch
• On Mode Power Consumption (W) : 46 W
• Annual Energy Consumption (kWh) * : 68 kWh
• Standby Power Consumption (W) **: 0.50 W
• Display Resolution (Pixels) : 1920 x 1080p
43HFL3011
• Energy Efficiency Class : A+
• Visible Screen Size : 108 cm / 43 inch
• On Mode Power Consumption (W) : 42 W
• Annual Energy Consumption (kWh) * : 62 kWh
• Standby Power Consumption (W) **: 0.50 W
• Display Resolution (Pixels) : 1920 x 1080p
* Energy consumption kWh per year, based on the
power consumption of the television operating
4 hours per day for 365 days. The actual energy
consumption depends on how the television is used.
** When the TV is turned off with the remote control
and no function is active.
End of use
Disposal of your old product and batteries
Your product is designed and manufactured with high
quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/EC.
37
Disposal of Waste Equipment by Users in Private
Household in the European Union.
This symbol on the product or on its packaging
indicates that this product must not be disposed
of with your other household waste. Instead, it is
your responsibility to dispose of your waste
equipment by handing it over to a designated
collection point for the recycling of waste electrical
and electronic equipment. The separate collection
and recycling of your waste equipment at the time of
disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects
human health and the enviroment. For more
information about where you can drop off your
waste equipment for recycling, please contact your
local city office, your household waste disposal
service or the shop where you purchased the
product.
Please inform yourself about the local separate
collection system for electrical and
electronic products.
Please act according to your local rules and do not
dispose of your old products with your
normal household waste. Correct disposal of your
old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please find out for yourself about the local rules on
separate collection of batteries because
correct disposal will help to prevent negative
consequences for the environment and human
health.
12.2
Reception
- Aerial input : 75 ohm coaxial (IEC75)
- Tuner bands : Hyperband; S-Channel; UHF; VHF
- DVB : DVB-T (terrestrial, antenna) COFDM 2K/8K;
DVB-T2; DVB-C (cable) QAM
- Analogue video playback : NTSC; SECAM; PAL
- Digital video playback : MPEG2 SD/HD
(ISO/IEC 13818-2); MPEG4 SD/HD (ISO/IEC
14496-10)
- Digital audio playback (ISO/IEC 13818-3)
12.3
Display
Type
Diagonal screen size:
- 24HFL3011: 60 cm / 24 inch
- 32HFL3011: 80 cm / 32 inch
- 40HFL3011: 102 cm / 40 inch
- 43HFL3011: 108 cm / 43 inch
Display resolution:
- 1366 x 768p (for 24HFL3011/32HFL3011)
- 1920 x 1080p (for 40HFL3011/43HFL3011)
Display resolutions
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz
Computer formats
Resolutions (amongst others)
• 640 x 480p - 60 Hz
• 800 x 600p - 60 Hz
• 1024 x 768p - 60 Hz
• 1280 x 768p - 60 Hz
• 1360 x 765p - 60 Hz
• 1360 x 768p - 60 Hz
• 1280 x 1024p - 60 Hz
• 1920 x 1080p - 60 Hz
12.4
Power
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Power
• Mains power : AC 220-240V +/-10%
• Ambient temperature : 5°C to 35°C
• Standby power consumption : less than 0.5W
• Power saving features : Eco mode, Picture mute (for
radio), Auto switch-off, Eco settings menu.
38
The power rating stated on the product typeplate is
the power consumption for this product during
normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
used for electrical safety (IEC 60065 Ed. 8.0).
12.5
Dimensions and weights
24HFL3011
- without TV stand:
Width 559.6 mm - Height 335.8 mm - Depth 44.9 mm
- Weight ± 3.29 kg
- with TV stand:
Width 559.6 mm - Height 344.5 mm - Depth 112 mm -
Weight ± 3.32 kg
32HFL3011
- without TV stand:
Width 726.5 mm - Height 425.4 mm - Depth 76.8 mm
- Weight ± 4.88 kg
- with TV stand:
Width 726.5 mm - Height 490.9 mm - Depth 186 mm
- Weight ± 4.96 kg
40HFL3011
- without TV stand:
Width 918 mm - Height 531.5 mm - Depth 76.8 mm -
Weight ± 8.0 kg
- with TV stand:
Width 918 mm - Height 596.7 mm - Depth 221.9 mm -
Weight ± 9.98 kg
43HFL3011
- without TV stand:
Width 971.3 mm - Height 563.5 mm - Depth 77.3 mm -
Weight ± 10.55 kg
- with TV stand:
Width 971.3 mm - Height 626.4 mm - Depth 212.1 mm
- Weight ± 12.59 kg
12.6
Connectivity
TV Rear
- HDMI 1 in - ARC - HDCP 2.2
- HDMI 2 in - HDCP 2.2
- SERV. U: Service port
- AUDIO IN (DVI): Stereo 3.5mm mini-jack
- DIGITAL AUDIO OUT: SPDIF
- YPbPr : Y Pb Pr, Audio L/R : Stereo mini-jack 3.5mm
- USB
- TV ANTENNA: 75 ohm coaxial (IEC)
TV Side
- CI: Common Interface
- HDMI 3 in - HDCP 2.2
- USB
- Headphones: Stereo 3.5mm mini-jack
12.7
Sound
- Mono / Stereo
- Sound enhancement : Incredible Surround, Clear
Sound
- Output power:
24": 10W (RMS @ 10% THD)
32"/40"/43": 16W (RMS @ 10% THD)
12.8
Multimedia
Note: Multimedia file names must not exceed 128
characters.
Supported multimedia connections
- USB (FAT / FAT 32 / NTFS): only connect USB
devices that consume 500 mA of power or less.
Supported image files
- JPEG: *.jpg, *.jpeg
- PNG: *.webp.jpg.jpg
Supported audio files
- MPEG1: *.mp3
Supported video files
- *.avi, *.mp4, *.mov, *.mkv, *.mpg, *.mpeg
Supported subtitle format
- SRT: multiple language support
39
13
Software
13.1
Software version
To view the current TV software version...
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > Software settings and press OK to
view current software information.
3. Press / , repeatedly if necessary, to close the
menu.
13.2
Open source software
This television contains open source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
offer is requested by the respective licences.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to .
. .
open.source@tpvision.com
13.3
Open source license
Open source license
Open source license statement
Acknowledgements and License Texts for any open
source software used in this product.
This is a document describing the distribution of the
source code used in this product, which fall
either under the GNU General Public License (the
GPL), or the GNU Lesser General Public License (the
LGPL), or any other open source license.
Instructions to obtain source code for this software
can be found in the documentation supplied with this
product.
TP VISION MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING
ANY WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, REGARDING
THIS SOFTWARE.
TP Vision offers no support for this software. The
preceding does not affect your warranties
and statutory rights regarding any product(s) you
purchased. It only applies to this source code
made available to you.
libsqlite3
SQLite is a C library that implements an SQL database
engine.
Programs that link with the SQLite library can have
SQL database access without running a separate
RDBMS process.
Source: http://linuxappfinder.com/package/libsqlite
3-0
libpng
It supports almost all PNG features, is extensible, and
has been extensively tested for over 17 years
Source: http://www.libpng.org
libboost
Provides a repository for free peer-reviewed portable
C++ source libraries. The emphasis is on libraries
which work well with the C++ standard library
Source: http://www.boost.org
libjpeg (6b)
Libjpeg is a widely used C library for reading and
writing JPEG image files.
Source: http://libjpeg.sourceforge.net/
zlib
zlib is designed to be a free, general-purpose, legally
unencumbered -- that is, not covered by any patents
-- lossless data-compression library for use on
virtually any computer hardware and operating
system.
Source: www.zlib.net
40
DirectFB
DirectFB is a thin library that provides hardware
graphics acceleration, input device handling and
abstraction, integrated windowing system with
support for translucent windows and multiple display
layers, not only on top of the Linux Framebuffer
Device.
Source: https://github.com/DirectFB
FFMpeg (0.6)
Cross-platform solution to record, convert and stream
audio and video. It includes libavcodec - the leading
audio/video codec library
Source: http://www.ffmpeg.org
Log4c
Log4c is a library of C for flexible logging to files,
syslog and other destinations. It is modeled after the
Log for Java library, staying as close to their API as is
reasonable. Here is a short introduction to Log4j
which describes the API, and design rationale.
Source: http://log4c.sourceforge.net
libmtd
MTD development is kept in GIT and managed
according to standard Linux development practices.
Source: http://www.linux-mtd.infradead.org
iconv
This library provides an iconv() implementation, for
use on systems which don't have one, or whose
implementation cannot convert from/to Unicode.
Source: https://github.com/GerHobbelt/libiconv
libcurl
libcurl is a free and easy-to-use client-side URL
transfer library, supporting DICT, FILE, FTP, FTPS,
Gopher, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS,
POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP,
SMTPS, Telnet and TFTP.
Source: https://curl.haxx.se/libcurl/
libexif
the EXIF parsing library. exif, the simple command
line interface to libexif. ... as libexif source tarball
releases
Source: http://libexif.sourceforge.net
openssl
OpenSSL is an open source project that provides a
robust, commercial-grade, and full-featured toolkit
for the Transport Layer Security (TLS) and Secure
Sockets Layer (SSL) protocols. It is also a general
purpose cryptography library.
Source: https://www.openssl.org
uchardet
An encoding detector library ported from Mozilla
Source: https://github.com/BYVoid/uchardet
webkit
WebKit is the web browser engine used by Safari,
App Store, and many other OS X, iOS, and Linux
applications.
Source: https://webkit.org
41
14
Troubleshooting
and support
14.1
Troubleshooting
Channels
No digital channels found during the installation
See the technical specifications to make sure that
your TV supports DVB-T or DVB-C in your
country. Make sure that all cables are properly
connected and that the correct network is selected.
Previously installed channels are not in the channel
list
Make sure that the correct channel list is selected.
General
The TV does not switch on
- Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
- Make sure that the power cable is securely
connected.
Creaking sound at startup or switch off
When you are turning the TV on, off or to standby,
you hear a creaking sound from the TV chassis.
The creaking sound is due to the normal expansion
and contraction of the TV as it cools and warms up.
This does not affect performance.
TV does not respond to the remote control
The TV requires some time to start up. During this
time, the TV does not respond to the remote
control or TV controls. This is normal behaviour.
If the TV continues to be unresponsive to the remote
control, you can check if the remote control is working
by means of a mobile phone camera. Put the phone
in camera mode and point the remote control to the
camera lens. If you press any key on the remote
control and you notice the infra red LED flicker
through the camera, the remote control is working.
The TV needs to be checked.
If you do not notice the flickering, the remote control
might be broken or its batteries are low. This method
of checking the remote control is not possible with
remote controls which are wirelessly paired with the
TV.
The TV goes back to standby after showing
the Philips startup screen
When the TV is in standby, a Philips startup screen is
displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
and reconnected to the power supply, the startup
screen is displayed at the next startup. To switch on
the TV from standby, press on the remote control or
the TV.
The standby light keeps on blinking
Disconnect the power cable from the power outlet.
Wait 5 minutes before you reconnect the
power cable. If the blinking reoccurs, contact Philips
TV Consumer Care.
Wrong menu language
Change the language back to your language.
1. Consumer Mode: On Press / .
Guest Mode: On Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select Setup > TV settings > Region and
Language > Menu language and press OK.
3. Select the language you want and press OK.
4. Press / , repeatedly if necessary, to close the
menu.
Picture
No picture / distorted picture
- Make sure that the antenna is properly connected
to the TV.
- Make sure that the correct device is selected as the
display source.
- Make sure that the external device or source is
properly connected.
Sound but no picture
- Make sure that the picture settings are set correctly.
Poor antenna reception
- Make sure that the antenna is properly connected
to the TV.
- Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects
can influence reception quality. If possible, try to
improve the reception quality by changing the
antenna direction or moving devices away from the
TV.
- If reception on only one channel is poor, fine-tune
this channel.
Poor picture from a device
- Make sure that the device is connected properly.
- Make sure that the picture settings are set correctly.
Picture settings change after a while
42
Make sure that Location is set to Home. You can
change and save settings in this mode.
A commercial banner appears
Make sure that Location is set to Home.
Picture does not fit the screen
Change to a different picture format.
Press SETTINGS key on remote control to access
the quick settings, then select Picture format for
adjustments.
Picture format keeps changing with different
channels
Select a non 'Auto' picture format.
Picture position is incorrect
Picture signals from some devices may not fit the
screen correctly. Check the signal output of
the connected device.
Computer picture is not stable
Make sure that your PC uses the supported resolution
and refresh rate.
Sound
No sound or poor sound quality
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
- Make sure that the sound settings are correctly set.
- Make sure that all cables are properly connected.
- Make sure that the volume is not muted or set to
zero.
- Make sure that the TV audio output is connected to
the audio input on the Home Theatre System.
- Sound should be heard from the HTS speakers.
- Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
Connections
HDMI
- Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
- If the TV does not recognise the HDMI device and
no picture is displayed, switch the source from
one device to another and back again.
- If there are intermittent sound disruptions, make
sure that output settings from the HDMI device
are correct.
- If you use an HDMI-to-DVI adapter or HDMI-to-DVI
cable, make sure that an additional audio cable
is connected to AUDIO IN (mini-jack only), if
available.
EasyLink does not work
- Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
No volume icon shown
- When a HDMI-CEC audio device is connected this
behaviour is normal.
Photos, videos and music from a USB device do not
show
- Make sure that the USB storage device is set to
Mass Storage Class compliant, as described in
the storage device's documentation.
- Make sure that the USB storage device is
compatible with the TV.
- Make sure that the audio and picture file formats are
supported by the TV.
Choppy playback of USB files
- The transfer performance of the USB storage device
may limit the data transfer rate to the TV
which causes poor playback.
14.2
Register
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
Go to www.philips.com/welcome
14.3
Online help
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support .
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
43
14.4
Consumer Care / Repair
For support and repair, call the Consumer Care
hotline in your country.
Find the telephone number in the printed
documentation that came with the TV.
Or consult our website www.philips.com/support.
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irrepairable damage to your TV or
void your warranty.
44
15
Safety and care
15.1
Safety
Important
Read and understand all safety instructions before
you use the TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Secure the TV from falling over
You can find the mounting instructions in the Quick
Start Guide that came with the TV. In case you lost
this guide, you can download the guide
from www.philips.com
Use the product type number of the TV to look for the
Quick Start Guide to download.
Risk of electric shock or fire
• Never expose the TV to rain or water. Never place
liquid containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips TV Consumer Care to have the TV
checked before use.
• Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning
candles, naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation slots or other
openings on the TV.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
exerted on the power cord when you swivel the TV
screen.
• To disconnect the TV from the mains power, the
power plug of the TV must be disconnected. When
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
Risk of injury or damage to the TV
• Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
• When wall mounted, ensure that the wall mount can
safely bear the weight of the TV set. TP Vision bears
no responsibility for improper wall mounting that
results in accident, injury or damage.
• Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Risk of damage to the TV !
Before you connect the TV to the power outlet,
ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
to the power outlet if the voltage is different.
Risk of injury
Follow these precautions to prevent the TV from
toppling over and causing injury:
• Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of
the mounting surface.
• Never place the TV on tall furniture, such as a
bookcase, without anchoring both the furniture and
TV to the wall or a suitable support.
• Teach children about the dangers of climbing on
furniture to reach the TV.
Risk of swallowing batteries !
The remote control may contain coin-type batteries
which can easily be swallowed by small children.
Keep these batteries out of reach of children at all
times.
Risk of overheating
Never install the TV in a confined space. Always leave
a space of at least 10 cm or 4 inches around the TV
for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
45
Lightning storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or
41°F, unpack the TV and wait until the TV temperature
reaches room temperature before connecting the TV
to the power outlet.
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
15.2
Screen care
• Never touch, push, rub or strike the screen with any
object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
• To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
• Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
46
16
Terms of Use
16.1
Terms of Use - TV
2016 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter referred
to as TP Vision, which is the manufacturer of the
product. TP Vision is the warrantor in relation to the
TV with which this booklet was packaged. Philips and
the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V
or their respective owners. TP Vision reserves the right
to change products at any time without being obliged
to adjust earlier supplies accordingly.
The written material packaged with the TV and the
manual stored in the memory of the TV or
downloaded from the Philips
website www.philips.com/support are believed to
be adequate for the intended use of the system.
The material in this manual is believed adequate for
the intended use of the system. If the product, or its
individual modules or procedures, are used for
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision warrants that the material itself
does not infringe any United States patents. No
further warranty is expressed or implied. TP Vision
cannot be held responsible neither for any errors in
the content of this document nor for any problems as
a result of the content in this document. Errors
reported to Philips will be adapted and published on
the Philips support website as soon as possible.
Terms of warranty - Risk of injury, damage to TV or
void of warranty!
Never attempt to repair the TV yourself. Use the TV
and accessories only as intended by the
manufacturer. The caution sign printed on the back of
the TV indicates risk of electric shock. Never remove
the TV cover. Always contact Philips TV Customer
Care for service or repairs. Find the telephone number
in the printed documentation that came with the
TV. Or consult our
website www.philips.com/support and select your
country if needed. Any operation expressly prohibited
in this manual, or any adjustments and assembly
procedures not recommended or authorised in this
manual, shall void the warranty.
Pixel characteristics
This LCD/LED product has a high number of colour
pixels. Although it has effective pixels of 99.999% or
more, black dots or bright points of light (red, green or
blue) may appear constantly on the screen. This is a
structural property of the display (within common
industry standards) and is not a malfunction.
CE compliance
Hereby, TP Vision Europe B.V. declares that
this television is in compliance with the
essential requirements and other relevant provisions
of Directives 1999/5/EC (RTTE), 2004/108/EC
(EMC), 2006/95/ EC (Low Voltage), 2009/125/EC
(Energy Labelling) and 2011/65/EC (RoHS).
From June 2016 onwards the following Directives
are valid 2014/53/EU (RED), 2009/125/EC (Eco
Design), 2010/30/ EU (Energy Labelling) and
2011/65/EC (RoHS).
Compliance with EMF
TP Vision manufactures and sells many products
targeted at consumers which, like any electronic
apparatus, in general have the ability to emit and
receive electromagnetic signals. One of TP Vision’s
leading business principles is to take all necessary
health and safety measures for our products, to
comply with all applicable legal requirements and to
stay well within the Electro Magnetic Field (EMF)
standards applicable at the time of producing the
products.
TP Vision is committed to developing, producing and
marketing products that cause no adverse health
effects. TP Vision confirms that, as long as its products
are handled properly for their intended use, they are
safe to use according to scientific evidence available
today. TP Vision plays an active role in the
development of international EMF and safety
standards, enabling TP Vision to anticipate further
developments in standardisation for early integration
in its products.
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
16.2
Copyrights
HDMI
HDMI®
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
47
Dolby
Dolby®
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
MHEG software
The copyright in MHEG software (the Software)
comprised in this television (this product) and
included to enable you to use interactive television
features is owned by S&T CLIENT SYSTEMS LIMITED
(the Owner). You are permitted to use the Software
only in conjunction with this product.
Kensington
(If applicable)
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with issued
registrations and pending applications in other
countries throughout the world.
Other trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
48
Index
A
Amplifier, audio system 33
Antenna connection, tips 5
Audio language 18
Audio Out - Optical 7
Audio to video sync 9
Auto volume levelling 32
Auto volume levelling 33
B
Backlight contrast 28
Bass 32
Blu-ray Disc, connect 10
Brightness 30
C
CAM - Conditional Access Module 7
CAM, install 7
Channel, problems 42
Channel, switch 17
Channels, reinstall 21
CI+ 7
Clear Sound 33
C
clock 25
C
Colour 28
Colour, Colour enhancement 29
Colour, Colour temperature 29
Common Interface slot 7
Consumer Care 44
Contact Philips 44
Contrast 28
Contrast, Brightness 30
Contrast, Contrast modes 30
Contrast, Dynamic contrast 30
Contrast, Gamma 30
Contrast, Video contrast 30
CVBS 7
D
Digital Text 19
DVB (Digital Video Broadcast) 22
DVB, settings 22
E
EasyLink 6
EasyLink, connection 6
EasyLink, settings 6
Eco settings 37
End of use 37
European Energy Label 37
F
Format and edges, Picture format 31
Format and edges, Picture shift 31
Format and edges, Screen edges 31
Frequency scan 22
G
Game console, connect 10
Gamma 30
H
HDMI ARC 5
Headphones 12
Headphones volume 32
Hearing impaired 18
Home Theatre System, connect 8
Home Theatre System, multichannel 9
Home Theatre System, problems 10
Home Theatre System, volume levelling 9
I
Incredible surround 32
L
Language, audio 18
Location 35
M
MPEG artefact reduction 31
N
Network frequency 22
Noise reduction 31
O
On and Off 13
Online support 43
Open source software 40
P
Photos, slideshow 26
Picture style 28
Picture, backlight contrast 28
Picture, colour 28
Picture, problems 42
Picture, sharpness 29
Power connection 3
Programme, tune 23
R
Radio channel 17
Register your product 43
Repair 44
S
Safety instructions 45
Screen care 46
Screen off 37
Sharpness 29
Sharpness, MPEG artefact reduction 31
Sharpness, Noise reduction 31
Sleep timer 25
Sleep timer 13
Sound style 31
Sound, problems 43
Standby 13
Subtitles 17
Super resolution 30
Support, online 43
Surround mode 32
Switch off timer 13
Switch off timer 25
49
