Table of Contents
- Contents
- 1 - TV tour
- 2 - Setting up
- 3 - Network
- 4 - Connect devices
- 4.1 - About connections
- 4.2 - CAM with smart card - CI+
- 4.3 - Receiver - Set-Top Box
- 4.4 - Home Theatre System - HTS
- 4.5 - Smartphones and tablets
- 4.6 - Blu-ray disc player
- 4.7 - DVD player
- 4.8 - Headphones
- 4.9 - Game console
- 4.10 - USB hard drive
- 4.11 - USB keyboard
- 4.12 - USB mouse
- 4.13 - USB flash drive
- 4.14 - Photo camera
- 4.15 - Camcorder
- 4.16 - Computer
- 5 - Switching On and Off
- 6 - Remote control
- 7 - Channels
- 8 - TV Guide
- 9 - Recording and Pause TV
- 10 - Home menu
- 11 - Utilities
- 12 - Netflix
- 13 - Sources
- 14 - Internet
- 15 - Videos, photos and music
- 16 - Smartphones and tablets
- 17 - Multi room
- 18 - Settings
- 19 - Networks
- 20 - Channel installation
- 21 - Software
- 22 - Specifications
- 23 - Help and support
- 24 - Safety and care
- 25 - Terms of use
- 26 - Copyrights
- Index
Philips 43PUH6101/88 User Manual
Displayed below is the user manual for 43PUH6101/88 by Philips which is a product in the TVs category. This manual has pages.
Related Manuals
Register your product and get support at 6101 series
www.philips.com/welcome
User Manual
43PUH6101
49PUH6101
55PUH6101
Contents
1 TV tour 4
1.1 Smart TV 4
1.2 App gallery 4
1.3 Rental videos 4
1.4 Ultra HD TV 4
1.5 Pause TV and recordings 4
1.6 Smartphones and tablets 4
2 Setting up 6
2.1 Read safety 6
2.2 TV stand and wall mounting 6
2.3 Tips on placement 6
2.4 Power cable 6
2.5 Antenna cable 6
3 Network 8
3.1 Network and Internet 8
4 Connect devices 12
4.1 About connections 12
4.2 CAM with smart card - CI+ 15
4.3 Receiver - Set-Top Box 16
4.4 Home Theatre System - HTS 17
4.5 Smartphones and tablets 18
4.6 Blu-ray disc player 18
4.7 DVD player 19
4.8 Headphones 19
4.9 Game console 19
4.10 USB hard drive 20
4.11 USB keyboard 21
4.12 USB mouse 21
4.13 USB flash drive 22
4.14 Photo camera 22
4.15 Camcorder 22
4.16 Computer 22
5 Switching On and Off 24
5.1 On or standby 24
5.2 Keys on TV 24
5.3 Sleep timer 24
5.4 Switch off timer 24
6 Remote control 25
6.1 Key overview 25
6.2 IR sensor 26
6.3 Batteries 26
6.4 Cleaning 26
7 Channels 27
7.1 Install Channels 27
7.2 Switch channels 27
7.3 Channel lists 27
7.4 Watching channels 28
7.5 Text / Teletext 30
7.6 Interactive TV 31
8 TV Guide 33
8.1 What you need 33
8.2 TV guide data 33
8.3 Using the TV guide 33
9 Recording and Pause TV 35
9.1 Recording 35
9.2 Pause TV 36
10 Home menu 37
10.1 About the Home menu 37
10.2 Open the Home menu 37
11 Utilities 38
12 Netflix 39
13 Sources 40
13.1 Switch to a device 40
13.2 Options for a TV Input 40
13.3 Scan connections 40
13.4 Game or computer 40
14 Internet 41
14.1 Start Internet 41
15 Videos, photos and music 42
15.1 From a USB connection 42
15.2 From a computer 42
15.3 Menu bar and sorting 42
15.4 Play your videos 42
15.5 View your photos 42
15.6 Play your music 43
16 Smartphones and tablets 44
16.1 Philips TV Remote App 44
16.2 Miracast 44
16.3 MHL 45
16.4 Smart TV 45
17 Multi room 49
17.1 About Multi room 49
17.2 What you need 49
17.3 Using Multi room 49
18 Settings 51
18.1 Quick settings 51
18.2 Picture 51
18.3 Sound 55
18.4 Eco settings 57
18.5 General settings 58
18.6 Clock and language 60
18.7 Universal access 63
19 Networks 65
20 Channel installation 66
20.1 Antenna/cable installation 66
20.2 Channel list copy 68
21 Software 70
21.1 Update software 70
21.2 Software version 70
21.3 Local updates 70
21.4 Look for OAD updates 70
21.5 Open source software 71
21.6 Open source license 71
22 Specifications 82
22.1 Environmental 82
22.2 Power 82
22.3 Reception 83
22.4 Display type 83
22.5 Display input resolution 83
22.6 Dimensions and Weights 83
22.7 Connectivity 83
22.8 Sound 83
2
22.9 Multimedia 83
23 Help and support 85
23.1 Register your TV 85
23.2 Using help 85
23.3 Troubleshooting 85
23.4 Online help 87
23.5 Consumer care / Repair 87
24 Safety and care 88
24.1 Safety 88
24.2 Screen care 89
25 Terms of use 90
26 Copyrights 91
26.1 MHL 91
26.2 Ultra HD 91
26.3 HDMI 91
26.4 Dolby Digital Plus 91
26.5 DTS 2.0 + Digital Out ™ 91
26.6 DTVi 91
26.7 Java 91
26.8 Microsoft 91
26.9 Wi-Fi Alliance 92
26.10 Kensington 92
26.11 MHEG software 92
26.12 Other trademarks 92
Index 93
3
1
TV tour
1.1
Smart TV
Connect this Philips Smart LED TV to the Internet
and discover a new world of television. You can make
a wired connection to your router or you can link up
wirelessly with Wi-Fi.
With the TV connected to your home network, a
smartphone can show a photo on TV, you can play
videos stored on your computer or control the TV with
your tablet.
With your TV connected to the Internet, you can
watch a rental video from an online video store, read
the online TV guide or record your favourite TV show
on a USB Hard Drive.
The Smart TV Apps add to the fun with all sorts of
entertainment and convenient services.
In Help, press Keywords and look up Smart
TV for more information.
1.2
App gallery
Open the App gallery in Smart TV to browse the
Apps, the collection of tailored websites for TV.
Find the App for YouTube videos, a national
newspaper, an online photo album, Twitter, etc.
There are Apps to rent a video from an online video
store and Apps for watching programmes you
missed.
If the App gallery does not hold what you are
looking for, try the World Wide Web and surf the
Internet on TV.
In Help, press Keywords and look up App
gallery for more information.
1.3
Rental videos
To watch a rental video, you don't need to leave
your home.
Simply rent the latest movie from your regional online
video store.
Start Smart TV and add the video store App to the
Smart TV start page.
Open the video store App, create your personal
account, select the movie and press play.
No fuss with downloading, you can watch the
movie immediately*.
In Help, press Keywords and look up Rental
videos for more information.
* Depending on the video streaming service of the
selected video store.
1.4
Ultra HD TV
This TV has an Ultra HD display. Its resolution is four
times as much as normal HD displays. Ultra HD
means 8 million pixels for the most refined and lifelike
picture on TV.
On top, the new Ultra Pixel HD Engine continuously
converts any incoming TV signal into Ultra HD
resolution. So you can enjoy this stunning picture
quality the moment you switch on the TV. Or you can
watch native Ultra HD videos through an HDMI
connection. Ultra HD offers TV viewing that is crisp
and sharp even on a big screen.
1.5
Pause TV and recordings
If you connect a USB Hard Drive, you can pause and
record a broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or
simply take a break during a sports match, while the
TV stores the broadcast on the USB Hard Drive. You
can watch it again later.
With a USB Hard Drive connected, you can also
record digital broadcasts. You can record while you
are watching a programme or schedule a recording of
an upcoming programme.
For more information, in Help, press the colour
key Keywords and look up Pause
TV or Recording.
1.6
Smartphones and tablets
The new Philips TV Remote App is your new TV
buddy.
With the TV Remote App on your smartphone or
tablet, you master your media around you. Send
photos, music or videos to your big TV screen or
4
watch any of your TV channels live on your tablet or
phone. Open the TV Guide and schedule a recording
for tomorrow. Your TV at home will do the job. With
the TV Remote App you are in control. You might
consider to simply lower the TV volume.
Download the Philips TV Remote App from your
favourite app store today.
It's free.
The Philips TV Remote App is available for iOS and
Android.
5
2
Setting up
2.1
Read safety
Read the safety instructions first before you use the
TV.
To read the instructions, in Help, press the colour
key Keywords and look up Safety instructions.
2.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
In case you lost this guide, you can download it
from www.philips.com.
Use the product type number of the TV to look for
the Quick Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
• 43PUx6101
VESA MIS-F 200x200, M6
• 49PUx6101
VESA MIS-F 400x200, M6
• 55PUx6101
VESA MIS-F 400x200, M6
Preparation
First remove the 4 plastic screw caps out of the
threaded bushes on the back of the TV.
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
2.3
Tips on placement
• Position the TV where light does not shine directly
on the screen.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal
screen size. When seated, your eyes should be level
with the centre of the screen.
2.4
Power cable
• Insert the power cable into the POWER connector
on the back of the TV.
• Make sure the power cable is securely inserted in
the connector.
• Make sure that the power plug, in the wall socket, is
accessible at all times.
• When you unplug the power cable, always pull the
plug, never pull the cable.
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
For more information, in Help, press the colour
key Keywords and look up Switching on for
more information.
6
2.5
Antenna cable
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
7
3
Network
3.1
Network and Internet
Home network
To enjoy the full capabilities of your Philips TV, your
TV must be connected to the Internet.
Connect the TV to a home network with a high-speed
Internet connection. You can connect your TV
wirelessly or wired to your network router.
Connect to network
Wireless connection
What you need
To connect the TV to the Internet wirelessly, you need
a Wi-Fi router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
Make the connection
Wireless
To make a wireless connection…
1 - Make sure that the router of your wireless network
is switched on.
2 - Press , select Network and press (right) to
enter the menu.
3 - Select Connect to network and press OK.
4 - Select Wireless and press OK.
5 - In the list of found networks, select on your
wireless network. If your network is not in the list
because the network name is hidden (you switched
off the SSID broadcast of the router), select Manual
entry to enter the network name yourself.
6 - Depending on the type of router, enter your
encryption key - WEP, WPA or WPA2. If you entered
the encryption key for this network before, you can
select Done to make the connection immediately.
If your router supports WPS or WPS PIN, you
select WPS, WPS PIN or Standard. Select your
choice and press OK.
7 - A message will be shown when the connection is
successful.
WPS
If your router has WPS, you can directly connect to
the router without scanning for networks. If you have
devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Connect to network and press OK.
3 - Select WPS then press OK.
4 - Go to the router, press the WPS button and return
to the TV within 2 minutes.
5 - Select Connect to make the connection.
6 - A message will be shown when the connection is
successful.
WPS with PIN code
If your router has WPS with a PIN code, you can
directly connect to the router without scanning for
networks. If you have devices in your wireless
network that use the WEP security encryption system,
you cannot use WPS.
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Connect to network and press OK.
3 - Select WPS with PIN code and press OK.
4 - Write down the 8-digit PIN code shown on
screen and enter it in the router software on your PC.
Consult the router manual on where to enter the PIN
code in the router software.
5 - Select Connect to make the connection.
6 - A message will be shown when the connection is
successful.
Problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
8
• Look in your wireless router's user manual for
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
DHCP
• If the connection fails, you can check the DHCP
(Dynamic Host Configuration Protocol) setting of the
router. DHCP should be switched on.
Wired connection
What you need
To connect the TV to the Internet, you need a
network router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
Make the connection
To make a wired connection…
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - Press , select Network and press (right) to
enter the menu.
4 - Select Connect to network and press OK.
5 - Select Wired and press OK. The TV constantly
searches for the network connection.
6 - A message will be shown when the connection is
successful.
If the connection fails, you can check the DHCP
setting of the router. DHCP should be switched on.
**To fulfill EMC regulations, use a shielded FTP Cat.
5E Ethernet cable.
Network settings
View network settings
You can view all current network settings here. The
IP and MAC address, signal strength, speed,
encryption method, etc.
To view the current network settings…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select View network settings and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Network configuration
If you are an advanced user and want to install your
network with Static IP addressing, set the TV to Static
IP.
To set the TV to Static IP…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Network configuration and press OK.
3 - Select Static IP and press OK to enable Static
IP configuration.
4 - Select Static IP configuration and configure the
connection.
5 - You can set the number for IP
address, Netmask, Gateway, DNS 1, or DNS 2.
6 - Press (left) repeatedly if necessary, to close
the menu.
Switch On with Wi-Fi (WoWLAN)
You can switch this TV on from your smartphone or
tablet if the TV is in Standby. The setting Switch On
with Wi-Fi (WoWLAN) must be switched on.
To switch on WoWLAN…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Switch on with Wi-Fi (WoWLAN) and
press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Digital Media Renderer - DMR
If your media files do not play on your TV, make sure
that the Digitial Media Renderer is switched on. As a
factory setting, DMR is switched on.
To switch on DMR…
1 - Press , select Network and press (right) to
9
enter the menu.
2 - Select Digital Media Renderer - DMR and
press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Switch on Wi-Fi connection
You can switch on or off Wi-Fi connection on your
TV.
To switch on Wi-Fi…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Wi-Fi On/Off and press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Switch on Wi-Fi Miracast
Switch on Wi-Fi Miracast to share the screen of your
smartphone, tablet or computer on the TV.
To switch on Miracast…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Wi-Fi Miracast and press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
For more information, in Help, press the colour
key Keywords and look up Miracast™, switch
on.
Reset Wi-Fi Miracast connections
Clear the list of connected and blocked devices that
are used with Miracast.
To clear Miracast connections…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Reset Wi-Fi Miracast connections and
press OK.
3 - Select Clear all and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Wi-Fi smart screen
To watch digital TV channels on your smartphone or
tablet with the Philips TV Remote App, you must
switch on Wi-Fi Smart Screen. Some scrambled
channels might not be available on your mobile
device.
To switch on Wi-Fi Smart Screen…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Wi-Fi smart screen and press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
TV network name
If you have more than one TV in your home network,
you can give the TV a unique name.
To change the TV name…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select TV network name and press OK.
3 - Enter the name with the on-screen keyboard.
4 - Select Done to confirm the change.
5 - Press (left) repeatedly if necessary, to close
the menu.
Netflix settings
With Netflix settings, you can view ESN number or
deactive Netflix device.
To enter Netflix settings…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Netflix settings and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Clear Internet memory
With Clear Internet Memory, you can clear all
Internet files and logins stored on your TV, such as
passwords, cookies, and history.
To clear the Internet memory…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Clear Internet memory and press OK.
3 - Select OK to confirm.
4 - Press (left) repeatedly if necessary, to close
the menu.
10
File sharing
The TV can connect to other devices in your wireless
network, like your computer or smartphone. You can
use a computer with Microsoft Windows or Apple OS
X.
On this TV, you can open photos, music and videos
stored on your computer.
11
4
Connect devices
4.1
About connections
Connectivity guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The
guide offers information on how to connect and
which cables to use.
Go to www.connectivityguide.philips.com
Antenna port
If you have a Set-top box (a digital receiver) or
Recorder, connect the antenna cables to run the
antenna signal through the Set-top box and/or
Recorder first before it enters the TV. In this way, the
antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI ports
HDMI quality
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for TV signal.
For best signal quality transfer, use a High speed
HDMI cable and do not use an HDMI cable longer
than 5 m.
Copy protection
HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
Management).
HDMI ARC
Only HDMI 1 on the TV have HDMI ARC (Audio
Return Channel).
If the device, typically a Home Theatre System (HTS),
also has the HDMI ARC connection, connect it
to HDMI 1 connection on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
HDMI MHL
With HDMI MHL, you can send what you see on your
Android smartphone or tablet to a TV screen.
The HDMI 4 connection on this TV
incorporates MHL 2.0 (Mobile High-Definition Link).
This wired connection offers great stability and
bandwidth, low latency, no wireless interference and
good quality sound reproduction. On top of that, the
MHL connection will charge the battery of your
smartphone or tablet. Although connected, your
mobile device will not be charging when the TV is on
standby.
Inform yourself about what passive MHL cable is
suited for your mobile device. In particular, with the
HDMI connector for the TV on one side, the type of
connector you need to connect to your smartphone
or tablet.
MHL, Mobile High-Definition Link and the MHL Logo
are trademarks or registered trademarks of the MHL,
LLC.
12
HDMI Ultra HD
This TV can display Ultra HD signals. Some devices -
connected with HDMI - do not recognise a TV with
Ultra HD and might not work correctly or show
distorted picture or sound. To avoid the
malfunctioning of such a device, you can set the
signal quality to a level the device can handle. If the
device is not using Ultra HD signals, you can switch
off Ultra HD for this HDMI connection.
The setting UHD 4:4:4/4:2:2 allows UHD YCbCr 4:4:4
/ 4:2:2 signals. The setting UHD 4:2:0 allows UHD
YCbCr 4:2:0 signals.
To set the signal quality…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select HDMI Ultra HD > HDMI 3 & 4 and
press OK.
3 - Select UHD 4:4:4/4:2:2, UHD
4:2:0 or UHD Off and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
HDMI CEC - EasyLink
EasyLink
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for High Definition (HD)
TV signals. For best signal quality transfer, use a High
speed HDMI cable and do not use an HDMI cable
longer than 5 m.
EasyLink HDMI CEC
If your devices are connected with HDMI and have
EasyLink, you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched On on
the TV and the connected device.
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.
Example HDMI CEC branding names are property of
their respective owners.
Operate devices
To operate a device connected to HDMI and set up
with EasyLink, select the device or its activity in the
list of TV connections. Press SOURCES , select a
device connected to an HDMI connection and
press OK.
Once the device is selected, the TV remote control
can control the device. However the
keys Home and OPTIONS and some other
TV keys, are not forwarded to the device.
If the key you need is not on the TV remote control,
you can select the key in the Options menu.
Press OPTIONS and select Controls in the
menu bar. On the screen, select the device key you
need and press OK.
Some very specific device keys might not be available
in the Controls menu.
Only devices that support EasyLink Remote
Control function will respond to the TV remote
control.
EasyLink On or Off
You can switch EasyLink on or off. The TV comes with
the EasyLink settings switched on.
To switch off EasyLink completely…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select EasyLink, press (right) and
select EasyLink one step further.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
EasyLink remote control
If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can switch off EasyLink Remote Control separately.
To switch EasyLink Remote Control on or off…
13
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select EasyLink > EasyLink Remote
Control and press OK.
3 - Select On or Off and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Pixel Plus Link
Some devices, a DVD or Blu-ray Disc player, might
have their own picture quality processing. To avoid
bad picture quality caused by interference with the
TV processing, the picture processing of these devices
should be disabled. The TV comes with Pixel Plus Link
switched on and disables the picture quality
processing of recent Philips devices connected to the
TV.
To switch Pixel Plus Link on or off…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select EasyLink > Pixel Plus Link and
press OK.
3 - Select On or Off and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Auto switch off devices
You can set the TV to switch off the connecting HDMI-
CEC compliant devices if they are not the active
source. The TV switches the connected device to
standby after 10 minutes of inactivity.
DVI to HDMI
If you still own a device that only has a DVI
connection, you can connect the device to any of
the HDMI connection with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use one of the HDMI connections
and add an Audio L/R cable (mini-jack 3.5mm) to
Audio In for sound, on the back of the TV.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
Y Pb Pr - Component
Y Pb Pr - Component Video is a high quality
connection.
The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals add
the Audio Left and Right signals for sound.
Match the YPbPr (green, blue, red) connector colours
with the cable plugs when you connect.
Use an Audio L/R cinch cable if your device also has
sound.
CVBS - Audio L R
CVBS - Composite Video is a high quality
connection. Next to the CVBS signal adds the Audio
Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
14
Scart
SCART is a good quality connection.
The SCART connection can be used for CVBS and
RGB video signals but cannot be used for High
Definition (HD) TV signals. The SCART connection
combines video and audio signals. The SCART
connection also supports NTSC playback.
Audio Out - Optical
Audio Out - Optical is a high quality sound
connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theatre System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theatre System.
For more information, in Help, press the colour
key Keywords and look up Audio out settings.
If the sound does not match the video on screen, you
can adjust the audio to video synchronisation.
For more information, in Help, press the colour
key Keywords and look up Audio to video sync.
4.2
CAM with smart card - CI+
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV operators
in your region. These programmes are scrambled by
the TV operator and descrambled with a prepaid CI+
module.
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to
their premium programmes. These programmes have
a high level of copy protection.
Contact a digital TV operator for more information on
terms & conditions.
15
Smart card
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to
their premium programmes.
Insert the smart card into the CAM module. See the
instruction you received from the operator.
To insert the CAM in the TV…
1 - Look on the CAM for the correct method of
insertion. Incorrect insertion can damage the CAM
and TV.
2 - While looking at the back of the TV, with the front
of the CAM facing towards you, gently insert the CAM
into the slot COMMON INTERFACE.
3 - Push the CAM in as far as it will go. Leave it in the
slot permanently.
When you switch on the TV, it may take a few minutes
before the CAM is activated. If a CAM is inserted and
subscription fees are paid (subscription methods can
differ), you can watch the scrambled channels
supported by the CAM smart card.
The CAM and smart card are exclusively for your TV. If
you remove the CAM, you will no longer be able to
watch the scrambled channels supported by the
CAM.
Passwords and PIN codes
For some CAMs, you must enter a PIN code to watch
its channels. When you set the PIN code for the CAM,
we recommend you to use the same code you are
using to unlock the TV.
To set the PIN code for the CAM…
1 - Press SOURCES .
2 - Select the channel type you are using the CAM
for.
3 - Press OPTIONS and select Common
Interface.
4 - Select the TV operator of the CAM. The following
screens come from the TV operator. Follow the on-
screen instruction to look up the PIN code setting.
4.3
Receiver - Set-Top Box
Cable box
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-
top box has no HDMI connection.
Switch Off Timer
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Switch this timer
off to prevent the TV from switching off automatically
after a 4 hour period without a key press on the
remote control of the TV.
For more information, in Help, press the colour
key Keywords and look up Switch off timer for
more information.
Satellite tuner
Connect the dish antenna cable to the Satellite
receiver.
Next to the antenna connection, add an HDMI cable
to connect the device to the TV.
Alternatively, you can use a SCART cable if the device
has no HDMI connection.
16
Switch Off Timer
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Switch this timer
off to prevent the TV from switching off automatically
after a 4 hour period without a key press on the
remote control of the TV.
For more information, in Help, press the colour
key Keywords and look up Switch off timer for
more information.
4.4
Home Theatre System - HTS
Connect with HDMI ARC
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
HDMI ARC
If your Home Theatre System has an HDMI ARC
connection, you can use HDMI 1 on the TV to
connect. With HDMI ARC, you do not need to
connect the extra audio cable. The HDMI ARC
connection combines both signals.
HDMI 1 on the TV can offer the Audio Return
Channel (ARC) signal. But once you have connected
the Home Theatre System, the TV can only send the
ARC signal to this HDMI connection.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
For more information, in Help, press the colour
key Keywords and look up Audio to video sync.
Connect with HDMI
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
If the Home Theatre System has no HDMI ARC
connection, add an optical audio cable (Toslink) to
send the sound of the TV picture to the Home Theatre
System.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
For more information, in Help, press the colour
key Keywords and look up Audio to video sync.
Audio out settings
Audio out delay
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is done automatically and always
correct.
Audio sync delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. On the HTS, increase the delay value
until there is a match between picture and sound. A
delay value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio Out Delay on the
TV.
To switch off Audio Out Delay…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out delay and
press OK.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
17
the menu.
Audio out offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 5ms. Maximum setting is -60ms.
The Audio out delay setting should be switched on.
To synchronise the sound on the TV…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out offset and
press OK.
3 - Use the slider bar to set the sound offset and
press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio Out
Format to Multichannel. With Multichannel, the TV
can send the compressed multichannel sound signal
from a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
To set Audio out format…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out format and
press OK.
3 - Select Multichannel or Stereo (uncompressed),
then press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio out levelling
Use the Audio Out Levelling setting to level the
volume (loudness) of the TV and the Home Theatre
System when you switch over from one to another.
Volume differences can be caused by differences in
sound processing.
To level the difference in volume…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out levelling and
press OK.
3 - Select More, Medium, or Less, then press OK.
4 - If the volume difference is large, select More. If
the volume difference is small, select Less.
5 - Press (left) repeatedly if necessary, to close
the menu.
Audio Out Levelling affects both the Audio Out -
Optical and HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive
or connected computer, the sound from your Home
Theatre System might be distorted. This noise is heard
when the audio or video file has DTS sound but the
Home Theatre System has no DTS sound processing.
You can fix this by setting the Audio out format of
the TV to Stereo (uncompressed).
Press for Sound > Advanced > Audio out
format.
No sound
If you cannot hear the sound from the TV on your
Home Theatre System, check if you connected the
HDMI cable to an HDMI1 ARC connection on the
Home Theatre System.
4.5
Smartphones and tablets
To connect a smartphone or tablet to the TV, you can
use a wireless or wired connection.
Wireless
For a wireless connection, on your smartphone or
tablet download the Philips TV Remote App from
your favourite app store.
Wired
For a wired connection, use the HDMI 4 MHL
connection on the back of the TV. In Help, press the
colour key Keywords and look up HDMI
MHL for more information.
4.6
Blu-ray disc player
Use a High speed HDMI cable to connect the Blu-
ray Disc player to the TV.
18
If the Blu-ray Disc player has EasyLink HDMI CEC,
you can operate the player with the TV remote
control.
4.7
DVD player
Use an HDMI cable to connect the DVD player to the
TV.
Alternatively, you can use a SCART cable, if the
device has no HDMI connection.
If the DVD player is connected with HDMI and has
EasyLink CEC, you can operate the player with the TV
remote control.
For more information on EasyLink, in Help, press the
colour key Keywords and look up EasyLink
HDMI CEC.
4.8
Headphones
You can connect a set of headphones to
the connection on the back of the TV. The
connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
To adjust the volume…
1 - Press , select Sound > Headphone
volume and press OK.
2 - Press the arrows (up) or (down) to adjust
the value.
3 - Press (left) repeatedly if necessary, to close
the menu.
4.9
Game console
HDMI
For best quality, connect the game console with a
High speed HDMI cable to the TV.
Y Pb Pr - Component
Connect the game console with a component video
cable (Y Pb Pr) and an audio L/R cable to the TV.
CVBS - Audio L R
CVBS - Composite Video is a high quality
connection. Next to the CVBS signal adds the Audio
Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
19
Scart
Connect the game console to the TV with a
composite cable (CVBS) and an audio L/R cable to
the TV.
If your game console only has Video (CVBS) and
Audio L/R output, use a Video Audio L/R to SCART
adapter (sold separately) to connect to the SCART
connection.
Best setting
Before you start playing a game from a connected
game console, we advice you to set the TV in the
ideal setting Game.
When you finish playing a game and start watching
TV again, remember to switch the Game or
Computer setting back to Off.
To set the TV to the ideal setting…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Game or Computer, and
select the device type you want to use. To switch
back to TV, select Off.
3 - Press (left) repeatedly if necessary, to close
the menu.
4.10
USB hard drive
What you need
If you connect a USB Hard Drive, you can pause or
record a TV broadcast. The TV broadcast must be a
digital broadcast (DVB broadcast or similar).
To Pause
To pause a broadcast, you need a USB compatible
Hard Drive with a minimum of 4GB disk space.
To Record
To pause and record a broadcast, you need a
minimum of 250GB disk space. If you want to record
a broadcast with TV guide data from the Internet, you
need to have the Internet connection installed on
your TV before you install the USB Hard Drive.
For more information on how to install a USB Hard
Drive, in Help, press the colour
key Keywords and look up USB hard drive,
installation.
Installation
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
Formatting
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard
Drive. If you want to record broadcasts with TV Guide
data from the Internet, you must setup the Internet
connection first before you install the USB Hard Drive.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
To format a USB Hard Drive…
20
1 - Connect the USB Hard Drive to one of the USB
connections on the TV. Do not connect another USB
device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting. Follow the instructions on screen.
4 - The TV will ask if you want to use the USB Hard
Drive to store apps, agree to the question if you do.
5 - When the USB Hard Drive is formatted, leave it
connected permanently.
4.11
USB keyboard
Connect
Connect a USB keyboard (USB-HID type) to enter text
on your TV.
Use one of the USB connections to connect.
Configure
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard layout first, you
can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout
was selected…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select USB keyboard settings, and press OK to
start the keyboard setup.
Special keys
Keys for entering text
• Enter key = OK
• Backspace = delete character before cursor
• Arrow keys = navigate within a text field
• To switch between keyboard layouts, if a secondary
layout is set, press the Ctrl + Spacebar keys
simultaneously.
Keys for apps and Internet pages
• Tab and Shift + Tab = Next and Previous
• Home = scroll to the top of the page
• End = scroll to the bottom of the page
• Page Up = jump one page up
• Page Down = jump one page down
• + = zoom in one step
• - = zoom out one step
• * = fit the web page to the screen width
4.12
USB mouse
Connect USB mouse
You can connect a USB mouse (USB-HID type) to
navigate pages on the Internet.
On an Internet page, you can select and click on links
more easily.
Connect the mouse
Switch the TV on and connect the USB mouse to one
of the USB connections on the TV. You can also
connect the USB mouse to a connected USB
keyboard.
Mouse clicks
• Left click = OK
You can use the scroll wheel to scroll pages up and
down.
Mouse speed
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard layout first, you
can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout
was selected…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Mouse settings, and press OK to start
21
the keyboard setup.
4.13
USB flash drive
You can view photos or play your music and videos
from a connected USB flash drive.
Insert a USB flash drive in one of
the USB connections on the TV while the TV is
switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press SOURCES and select USB.
To stop watching the USB flash drive content,
press EXIT or select another activity.
To disconnect the USB flash drive, you can pull out
the flash drive anytime.
Ultra HD on USB
You can view photos in Ultra HD resolution from a
connected USB device or flash drive. The TV will
downscale the resolution to Ultra HD if the resolution
of the photo is higher.
For more information on watching or playing content
from a USB flash drive, in Help, press the colour
key Keywords and look up Photos, videos and
music.
4.14
Photo camera
To view photos stored on your digital photo camera,
you can connect the camera directly to the TV.
Use one of the USB connections on the TV to
connect. Switch on the camera after you made the
connection.
If the contents list does not appear automatically,
press SOURCES , and select USB.
Your camera might need to be set to transfer its
content with PTP (Picture Transfer Protocol). Read
the user manual of the digital photo camera.
For more information on viewing photos, in Help,
press the colour key Keywords and look
up Photos, videos and music.
4.15
Camcorder
HDMI
For best quality, use an HDMI cable to connect the
camcorder to the TV.
Audio Video LR / Scart
You can use an HDMI, YPbPr or SCART connection to
connect your camcorder. If your camcorder only has
Video (CVBS) and Audio L/R output, use a Video
Audio L/R to SCART adapter (sold separately) to
connect to the SCART connection.
4.16
Computer
Connect
You can connect your computer to the TV and use
the TV as a PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the
TV.
22
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter
(sold separately) to connect the PC to HDMI and an
audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R
on the back of the TV.
Ideal setting
If you connect a computer, we advice you to give the
connection, on which the computer is connected, the
correct device type name in the Source menu. If you
then switch to Computer in the Source menu, the TV
is set to the ideal Computer setting automatically.
You can manually switch the ideal setting to Off for
watching TV or Game for playing a game from a
connected game console (remember to switch back
to Off when you stop playing a game).
If you switch to a source and change the Game or
Computer setting, it will be stored for this selected
source.
To set the TV to the ideal setting…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Game or computer, and
press OK.
3 - Select Game (for gaming) or
select Computer (for watching a movie).
4 - Press (left) repeatedly if necessary, to close
the menu.
Remember to set Game or computer setting
to Off when you stop playing the game.
23
5
Switching On and
Off
5.1
On or standby
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
With the TV in Standby, press on the remote
control to switch the TV on. You can also press the
small joystick key on the back of the TV to switch the
TV on in case you can't find the remote control or its
batteries are empty.
Switch to standby
To switch the TV to standby, press on the remote
control. You can also press the small joystick key on
the back of the TV.
In standby mode, the TV is still connected to the
mains power but consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
5.2
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…
1 - With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2 - Press left or right to select Volume,
Channel or Sources. Select Demo, to start a
demo movie.
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection. Press the joystick key to start the demo
movie.
4 - The menu will disappear automatically.
To switch the TV on standby, select and press the
joystick key.
5.3
Sleep timer
With the Sleep Timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep Timer…
1 - Press , select General settings > Sleep
timer and press OK.
2 - With the slider bar you can set the time to up to
180 minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
3 - Press BACK to close the menu.
5.4
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer …
1 - Press , select Eco settings and
press (right) to enter the menu.
2 - Select Switch off timer and press OK.
3 - Press the arrows (up) or (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4 - Press (left) repeatedly if necessary, to close
the menu.
For more information on environmentally friendly TV
settings, in Help, press the colour
key Keywords and look up Eco settings.
24
6
Remote control
6.1
Key overview
Top
1 - Standby / On
To switch the TV on or back to Standby.
2 - Playback and Record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to start recording
3 - Ambilight
This function is only available in Ambilight series.
4 - TV GUIDE
To open or close the TV Guide.
5 - Search
To open the searches page.
6 - Settings
To open the Settings menu.
7 - SOURCES
To open the Sources menu.
8 - LIST
To open or close the channel list.
Middle
1 - Home
To open the Home menu.
2 - SMART TV
To open the Smart TV start page.
3 - Colour keys
Direct selection of options. Blue key , opens Help.
4 - INFO
To open or close programme info.
5 - BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
To go back to the previous App/Internet page.
6 - - EXIT
To switch back to watch TV. To stop an interactive TV
application.
7 - OPTIONS
To open or close the Options menu.
8 - OK key
To confirm a selection or setting. To open the channel
list while watching TV.
9 - Arrow / navigation keys
To navigate up, down, left or right.
10 - MULTIVIEW
To open an extra small screen.
Bottom
25
1 -
To open the Netflix App directly. With the TV switched
on or from standby.
2 - Volume
To adjust the volume level.
3 - Number keys
To select a channel directly.
4 - SUBTITLE
To switch subtitles on, off or to show automatically.
5 - Channel
To switch to the next or previous channel in the
channel list. To open the next or previous page in
Text/Teletext. To start the next or previous chapter on
a disc.
6 - Mute
To mute the sound or to restore it.
7 - TEXT
To open or close Text/Teletext.
6.2
IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
6.3
Batteries
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the back of the remote control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
For more information, in Help, press the colour
key Keywords and look up End of use.
6.4
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
26
7
Channels
7.1
Install Channels
For more information, in Help, press the colour
key Keywords and look up Channel, Antenna
installation or Channel, Cable installation.
7.2
Switch channels
• To watch TV channels, press . The TV tunes to
the TV channel you last watched.
• Alternatively, press Home to open the Home
menu and select Channels and press OK.
• To switch channels, press + or -. If you
know the channel number, type in the number with
the number keys. Press OK after you entered the
number to switch channels.
• To switch back to the previously tuned channel,
press BACK .
To switch to a channel from a channel list
While watching a TV channel, press LIST to open
the channel lists.
The channel list can have several pages with
channels. To view the next or previous page,
press + or -.
To close the channel lists without switching channels,
press LIST again.
Radio channels
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
7.3
Channel lists
Favourite channels
You can create a favourite channel list that only holds
the channels you want to watch. With the Favourite
channel list selected, you will only see your favourite
channels when you switch through channels.
Create your favourite channel list
1 - While watching a TV channel, press LIST to
open the channel list.
2 - Select All to view all channels.
3 - Select the channel, and press to mark as
favourite.
4 - The selected channel is marked with a .
5 - To finish, press BACK . The channels are
added to the Favourites list.
To remove a channel from the favourites list, select
the channel with , then press again to unmark
as favourite.
Reorder
You can reorder — reposition — channels in the
Favourite channel list.
1 - In the channel list Favourites, highlight the
channel you want to reposition.
2 - Press .
3 - Select the channel to reorder and press OK.
4 - Press the Navigation buttons to move the
highlighted channel to another location and
press OK.
5 - Once complete, press EXIT to exit from
the Favourite channel list.
You can highlight another channel and do the same.
Channel list views
In the channel lists, you can find all installed TV and
radio channels.
Next to the channel list All, which holds all installed
channels, you can set up a list of Favourites, view the
installed Radio stations separately or discover the
newly added channels in New.
Channel logos
In some countries, the TV can show the channel
logos. If you do not want these logos to appear, you
can switch them off.
To switch off Channel logos . . .
1 - Press , select General settings > Channel
logos and press OK.
2 - Select Off and press OK.
3 - Press BACK , repeatedly if necessary, to close
the menu.
Rename channels
You can rename channels in the channel list.
1 - Select the channel you want to rename in one of
the channel lists.
2 - Select the channel to rename.
3 - Press .
You can enter text with the remote control keyboard
or open the on-screen keyboard.
With the on-screen keyboard
• To open the on-screen keyboard, place the cursor in
the name text field and press OK.
27
• To delete the character in front of the cursor,
press Backspace .
• To enter a character, select the character with the
arrow keys and press OK.
• To select uppercase characters, press .
• To select numbers or special characters, press .
• When you are ready, press BACK to close the
on-screen keyboard.
• To finish renaming, select Done and press OK.
7.4
Watching channels
Tune to a channel
To start watching TV channels, press . The TV
tunes to the channel you last watched.
Switch Channels
To switch channels, press or -.
If you know the channel number, type in the number
with the number keys. Press OK after you entered
the number to switch immediately.
Previous channel
To switch back to the previously tuned channel,
press BACK.
Lock a channel
Lock and unlock a channel
To prevent children from watching a channel, you can
lock a channel. To watch a locked channel, you must
enter the 4 digit Child Lock PIN code first. You
cannot lock programmes from connected devices.
To lock a channel…
1 - Press .
2 - Press OK to open the channel list. If necessary
change the channel list.
3 - Select the channel you want to lock.
4 - Press OPTIONS and select Lock
channel and press OK.
5 - Enter your 4 digit PIN code if the TV asks for it. A
locked channel is marked with a (lock).
6 - Press (left) to go back one step or
press BACK to close the menu.
To unlock a channel…
1 - Press .
2 - Press OK to open the channel list. If necessary
change the channel list.
3 - Select the channel you want to unlock.
4 - Press OPTIONS and select Unlock
channel and press OK.
5 - Enter your 4 digit PIN code if the TV asks for it.
6 - Press (left) to go back one step or
press BACK to close the menu.
If you lock or unlock channels in a channel list, you
only have to enter the PIN code just once until you
close the channel list.
For more information, in Help, press the colour
key Keywords and look up Child lock for more
information.
Parental rating
To prevent children from watching a programme not
suitable for their age, you can set an age rating.
Digital channels can have their programmes age
rated. When the age rating of a programme is equal to
or higher than the age you have set as age rating for
your child, the programme will be locked. To watch a
locked programme, you must enter the Parental
rating code first.
To set an age rating…
1 - Press , select Child Lock > Parental
rating and press OK.
2 - Enter a 4-digit Child lock code. If you did not set
a code yet, select Set code in Child lock. Enter a
4-digit Child lock code and confirm. Now you can set
an age rating.
3 - Back in Parental rating, select the age and
press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
To switch off the parental age rating, select None.
However, in some countries you must set an age
rating.
For some broadcasters/operators, the TV only locks
programmes with a higher rating. The parental age
rating is set for all channels.
Channel options
Open options
While watching a channel, you can set some options.
Depending on the type of channel you are watching
(analogue or digital) or depending on the TV settings
you made, some options are available.
To open the options menu…
1 - While watching a channel, press OPTIONS.
2 - Press OPTIONS again to close.
28
Universal access
In Help, press Keywords and look up Universal
access for more information.
Video selection
Digital TV channels can offer multi video signals (multi-
feed broadcast), different camera viewpoints or
angles of the same event or different programmes on
one TV channel. The TV shows a message if any such
TV channels are available.
Subtitles
Switch on
To switch on Subtitles, press SUBTITLE.
You can switch subtitles On or Off. Alternatively
you can select Automatic.
Automatic
If language information is part of the digital broadcast
and the broadcasted programme is not in your
language (the language set on TV), the TV can show
subtitles automatically in one of your preferred
subtitle languages. One of these subtitle languages
must also be part of the broadcast.
You can select your preferred subtitle languages
in Subtitle language.
Subtitles from Text
If you tune to an analogue channel, you need to
make the subtitles available for each channel
manually.
1 - Switch to a channel and press TEXT to open
Text.
2 - Enter the page number for subtitles, usually 888.
3 - Press TEXT again, to close Text.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and press INFO .
Subtitle Language
Preferred subtitle languages
A digital broadcast can offer several subtitle
languages for a programme. You can set a preferred
primary and secondary subtitle language. If subtitles
in one of these languages are available, the TV will
show the subtitles you selected.
To set the primary and secondary subtitle language…
1 - Press , select General
settings > Languages > Primary
subtitles or Secondary subtitles.
2 - Select the language you need and press OK.
3 - Press (left) to go back one step or
press BACK to close the menu.
Select a subtitle language
If none of the preferred subtitle languages are
available, you can select another subtitle language if
available. If no subtitle languages are available, you
cannot select this option.
To select a subtitle language when none of your
preferred languages are available…
1 - Press OPTIONS.
2 - Select Subtitle language and select one of the
languages as subtitles temporarily.
Audio language
Preferred audio language
A digital broadcast can offer several audio languages
(spoken languages) for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to the audio language.
To set the primary and secondary audio language…
1 - Press , select General settings and
select Languages > Primary audio or Secondary
audio.
2 - Select the language you need and press OK.
3 - Press (left) to go back one step or
press BACK to close the menu.
Select an audio language
If none of the preferred audio languages are
available, you can select another audio language if
available. If no audio languages are available, you
cannot select this option.
To select an audio language when none of your
preferred languages are available…
1 - Press OPTIONS.
2 - Select Audio language and select one of the
languages as audio temporarily.
29
Dual I-II
If an audio signal contains two audio languages but
one language or both has no language indication, this
option is available.
Common Interface
If you installed a CAM in one of the Common
Interface slots, you can view the CAM and operator
information or do some CAM related settings.
To view the CAM information…
1 - Press SOURCES.
2 - Select the channel type you are using the CAM
for Watch TV.
3 - Press OPTIONS and select Common
Interface.
4 - Select the appropriate Common Interface slot
and press (right).
5 - Select the TV operator of the CAM and press OK.
The following screens come from the TV operator.
HbbTV on this channel
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press OPTIONS and select HbbTV on this
channel and press (right).
3 - Select Off and press OK.
4 - Press (left) to go back one step or
press BACK to close the menu.
To block HbbTV on TV completely…
1 - Press , select General settings > HbbTV.
2 - Select Off and press OK.
3 - Press (left) to go back one step or
press BACK to close the menu.
MHP applications
Enable or disable the MHP applications.
Mono / Stereo
You can switch the sound of an analogue channel to
Mono or Stereo.
To switch to Mono or Stereo…
1 - Tune to an analoge channel.
2 - Press OPTIONS, select Mono/Stereo and
press (right).
3 - Select Mono or Stereo and press OK.
4 - Press (left) to go back one step or
press BACK to close the menu.
Status
Select Status to view technical information on the
channel (if it is analogue or digital) or a connected
device you are watching.
Share
Enables the user to communicate his activity with his
social networks (such as Twitter or email).
7.5
Text / Teletext
Text pages
To open Text/Teletext press TEXT, while you are
watching TV channels.
To close Text, press TEXT again.
Select a Text page
To select a page . . .
1 - Enter the page number with the number keys.
2 - Use the arrow keys to navigate.
3 - Press a colour key to select a colour-coded
subject at the bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press OPTIONS and select T.O.P. overview.
Text options
In Text/Teletext, press OPTIONS to select the
following…
• Freeze page
To stop the automatic rotation of subpages.
• Dual screen / Full screen
To show the TV channel and Text alongside each
other.
• T.O.P. overview
To open T.O.P. Text.
• Enlarge
To enlarge the Text page for comfortable reading.
30
• Reveal
To unhide hidden information on a page.
• Cycle subpages
To cycle subpages when these are available.
• Language
To switch the group of characters that Text uses to
display correctly.
• Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text setup
Text language
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Language > Primary text or Secondary
text and press OK.
3 - Select your preferred Text languages.
4 - Press (left) repeatedly if necessary, to close
the menu.
Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5…
1 - Press TEXT.
2 - With Text/Teletext open on screen,
press OPTIONS.
3 - Select Text 2.5 > Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
7.6
Interactive TV
About iTV
With interactive TV, some digital broadcasters
combine their normal TV programme with information
or entertainment pages. On some pages, you can
respond to a programme or vote, do online shopping
or pay for a video-on-demand programme.
HbbTV, MHEG, . . .
Broadcasters use various interactive TV systems :
HbbTV (Hybrid Broadcast Broadband TV) or iTV
(Interactive TV - MHEG). Interactive TV is sometimes
referred to as Digital Text or Red button. But each
system is distinct.
Visit the broadcaster's Internet website for more
information.
What you need
Interactive TV is only available on digital TV channels.
To enjoy the full benefits of Interactive TV, you need
a high-speed (broadband) Internet connection to the
TV.
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press , select General
settings > Advanced > HbbTV and press OK.
2 - Select On.
3 - Press (left) repeatedly if necessary, to close
the menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press OPTIONS and select HbbTV on this
channel.
3 - Select Off.
Use iTV
Open iTV pages
Most channels that offer HbbTV or iTV invite you to
press the colour key (red) or OK key to open
their interactive programme.
Navigate iTV pages
You can use the arrow and colour keys, the number
keys and the BACK key to navigate the iTV
pages.
You can use the (Play), (Pause) and (Stop)
keys to watch videos within iTV pages.
Digital Text (UK only)
To open Digital Text, press TEXT. To close,
press BACK .
Close iTV pages
Most iTV pages inform you which key to use to close.
To force an iTV page to close, switch to the next TV
channel and press BACK.
31
About interactive TV
With interactive TV, some digital broadcasters
combine their normal TV programme with information
or entertainment pages.
Note:
• You cannot download files to your TV with this
feature.
• Not all TV programmes, commercials and features
include closed captioning information.
• You cannot respond to the digital content.
Visit the broadcaster's Internet website for more
information.
32
8
TV Guide
8.1
What you need
With the TV Guide you can view a list of the current
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
Guide information.
The TV can collect TV Guide information for the
channels that are installed on the TV. The TV cannot
collect the TV Guide information for channels viewed
from a digital receiver or decoder.
8.2
TV guide data
The TV Guide receives information (data) from
broadcasters or from the Internet. In some regions
and for some channels, TV Guide information might
not be available. The TV can collect TV Guide
information for the channels that are installed on the
TV. The TV cannot collect the TV Guide information
from channels viewed from a digital receiver or
decoder.
The TV comes with the information set to From the
broadcaster.
If TV Guide information comes from the Internet, the
TV Guide can also list analogue channels next to the
digital channels. The TV Guide menu also shows a
small screen with the current channel.
From the Internet
If the TV is connected to the Internet, you can set the
TV to receive the TV Guide information from the
Internet.
To set the TV Guide information…
1 - Press , select General Settings and
press (right) to enter the menu.
2 - Select Advanced > TV Guide > From the
Internet and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Missing recordings
When some recordings seem to have disappeared
from the list of recordings, the TV Guide info (data)
might have changed. Recordings made with the
setting From the broadcaster become invisible in
the list if you switch the setting to From the
Internet or vice versa. The TV might have switched
to From the Internet automatically.
To make the recordings available in the list of
recordings, switch to the setting that was selected
when the recordings were made.
8.3
Using the TV guide
Open the TV guide
To open the TV Guide, press TV GUIDE. The TV
Guide shows the channels of the selected tuner.
Press TV GUIDE again to close.
The first time you open the TV Guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV Guide data is stored on TV.
Tune to a programme
From the TV Guide, you can tune to a current
programme.
To switch to the programme (channel), select the
programme and press OK.
View programme details
To call up the details of the selected programme…
1 - Press INFO.
2 - Press BACK to close.
Change day
The TV guide can show scheduled programmes for
the upcoming days (maximum up to 8 days).
If the TV guide information comes from the
broadcaster, you can press + to view the
schedule of one of the next days. Press - to go
back to the previous day.
Alternatively, you can press OPTIONS and
select Change day.
Select Previous day, Today or Next day and
press OK, to select the day of the schedule.
The TV guide can show scheduled programmes for
the upcoming days (maximum up to 8 days).
f the TV guide information comes from the
broadcaster, you can press + to view the
schedule of one of the next days. Press - to go
back to the previous day.
To change day…
1 - Press TV GUIDE.
2 - Press OPTIONS.
3 - Select Change day, select Previous
33
day, Today or Next day and press OK.
4 - Press BACK to close the menu.
Set a reminder
You can set reminders that alert you of the start of a
programme with a message on screen.
• To set a reminder, select the programme in the
schedule and press for Set reminder. The
programme is marked with a clock.
• To cancel the reminder, press the for Clear
reminder.
• To view a list of all reminders you have set,
press OPTIONS, and select All reminders.
Search by genre
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
etc.
To search for programmes by genre…
1 - Press TV GUIDE.
2 - Press OPTIONS.
3 - Select Search by genre and press OK.
4 - Select the genre you want and press OK. A list
with the found programmes appears.
5 - You can set reminders or schedule a recording on
a selected programme.
6 - Press BACK to close the menu.
Set a recording
You can set a recording in the TV Guide*.
To see the recording list, press Recordings , a
programme set to be recorded is marked with
a (red dot) on the front of the programme name.
To record a programme…
1 - Press TV GUIDE and select a future or
ongoing programme.
2 - Press the colour key Record .
3 - Press BACK to close the menu.
To cancel a recording…
1 - Press TV GUIDE and select the programme
set for recording.
2 - Press the colour key Clear Recording .
3 - Press BACK to close the menu.
34
9
Recording and
Pause TV
9.1
Recording
What you need
You can record a digital TV broadcast and watch it
later.
To record a TV programme you need…
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on screen TV
Guide
• a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
Some digital TV operators do not allow the recording
of channels.
For more information on installing a USB Hard Drive,
in Help, press the colour key Keywords and
look up USB hard drive, installation.
Record a programme
Record now
To record the programme you are watching right now,
press (Record) on the remote control. The
recording will start immediately.
To stop the recording, press (Stop).
When TV Guide data is available, the programme you
are watching will be recorded from the moment you
pressed the recording key until the programme ends.
• If you receive TV guide information from the
Internet, you can adjust the end time of the recording
in the pop-up window before you confirm the
recording.
• If you receive TV guide information from the
broadcaster, the recording starts immediately. You
can adjust the end time of the recording in the list of
recordings.
Schedule a recording
You can schedule a recording of an upcoming
programme for today or a few days from today
(maximum of 8 days away).
1 - To schedule a recording, press TV Guide .
On the TV guide page, select the channel and
programme you wish to record.
You can enter the channel number to jump to the
channel in the list.
Press (Right) or (Left) to scroll through the
programmes of a channel.
To change the date of the list,
press OPTIONS and select Change day. In the
list, select the day you want and press OK. If the TV
guide comes from the Internet, you can select the
date at the top of the page and press OK.
2 - With the programme highlighted,
press Record . The TV adds some time buffer at
the end of the programme. You can add some extra
buffer if needed.
3 - Select Schedule and press OK. The programme
is scheduled for recording. A warning will appear / will
be shown automatically when overlapping
recordings are scheduled.
If you plan to record a programme in your absence,
remember to leave the TV switched to standby and
the USB Hard Drive switched on.
List of recordings
To view the list of recordings and scheduled
recordings, press Home , select Utilities
> Recordings and press OK.
In this list, you can select a recording to watch,
remove recorded programmes, adjust the end time of
an ongoing recording or check the free disk space.
Also in this list, if the TV guide comes from the
Internet, you can schedule a recording for which you
set the beginning and end time yourself, as a timed
recording not linked to a programme. To set a timed
recording, select Schedule recording at the top of
the page and press OK. Set the channel, date and
time span. To confirm the recording,
select Schedule and press OK.
Remove a scheduled recording
Select the scheduled recording,
press Remove and press OK.
Specifics
• While recording a programme, you can watch a
previously recorded programme.
• While recording, you cannot switch TV channels.
• While recording, you cannot pause the TV
broadcast.
• To Record, broadcasters need a reliable clock
setting. If you reset the TV clock manually, recordings
may fail.
• The Audio Description audio (commentary) for the
visually impaired cannot be recorded.
35
• You can record the digital (DVB) subtitles of channel.
You cannot record subtitles that come from Text
services. To check if digital (DVB) subtitles are
available, tune to the TV channel and
press OPTIONS , select Subtitle language to
open the list of Subtitles. You can only record a
subtitle language preceded by a DVB icon.
Watch a recording
To watch a recording . . .
1 - Press Home ,
select Utilities > Recordings and press OK.
2 - In the list, select the recording and
press (Play) to start the playback. You can use
the (Forward), (Rewind), (Pause)
or (Stop) keys on the remote control.
Expired recording
Broadcasters can limit the number of days a recording
can be viewed. A recording in the list can show the
number of days before it expires.
Failed recording
When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
recording is marked as Failed.
Delete a recording
To delete a made recording, select the recording in
the list, press Remove and press OK.
For more information, press Keywords and look
up Record a programme.
9.2
Pause TV
You can pause a TV broadcast and resume watching
it later. Only digital TV channels can be paused. You
must connect a USB Hard Drive to buffer the
broadcast. You can pause a broadcast for a maximum
time span of 90 minutes.
For more information, press Keywords and look
up USB hard drive.
Pause or resume a broadcast
To pause a broadcast, press (Pause). A progress
bar appears briefly on screen.
To call up the progress bar, press (Pause) again.
To resume watching, press (Play). The icon on
screen indicates you are watching a paused
broadcast.
Back to the actual TV broadcast
To switch back to the actual TV broadcast,
press (Stop).
The moment you switch to a digital channel, the USB
Hard Drive starts buffering the broadcast. When you
switch to another digital channel, the broadcast of the
new channel is buffered and the broadcast of the
former channel is cleared. When you switch to a
connected device (a Blu-ray Disc player or digital
receiver) the USB Hard Drive stops buffering and the
broadcast is cleared. Also when you switch the TV to
standby the broadcast is cleared.
Whilst recording a programme on the USB Hard Drive,
you cannot pause a broadcast.
Instant replay
Whilst watching a broadcast from a digital TV
channel, you can easily instant replay the broadcast.
To replay the last 10 seconds of a broadcast,
press (Pause) and press (Left).
You can press repeatedly until you reach the start
of the broadcast buffer or the maximum time span.
Progress bar
With the progress bar on screen, press (Rewind)
or press (Forward) to select from where you want
to start viewing the paused broadcast. Press these
keys repeatedly to change speed.
36
10
Home menu
10.1
About the Home menu
Channels
This row contains all channles.
Sources
This row contains available sources in this TV.
Utilities
This row contains TV functions which are available for
user.
Quick settings
This row contains settings which are available for
user.
10.2
Open the Home menu
To open the Home menu and open an item…
1 - Press Home .
2 - Select an item and press OK to open or start it.
3 - Press BACK to close the Home menu
without starting anything.
37
11
Utilities
Smart TV
Open Smart TV page.
Internet
Open Internet browser.
TV guide
For more information, in Help, press the colour
key Keywords and look up TV guide.
Recording
For more information, in Help, press the colour
key Keywords and look up Recording.
Channel
View channel list.
Update software
For more information, in Help, press the colour
key Keywords and look up Update software.
Demo Me
View Demo Me for demo on this TV.
Browse Net TV
View available Net TV content.
BBC Catal
View BBC Catel content.
BBC News
View BBC news content.
BBC iPlayer
View BBC iPlayer content.
BBC Sport
View BBC sport content.
38
12
Netflix
If you have a Netflix menbership subscription, you
can enjoy Netflix on this TV. Your TV must be
connected to the Internet.
To open Netflix, press to open the Netflix
App. You can open Netflix immediately from a TV in
standby.
www.netflix.com
39
13
Sources
13.1
Switch to a device
From the list of Sources, you can switch to any of the
connected devices. You can switch to a tuner to
watch TV, open the content of a connected USB Flash
Drive or see the recordings you made on a connected
USB Hard Drive. You can switch to your connected
devices to watch their programme, a digital receiver or
a Blu-ray Disc player.
To switch to a connected device…
1 - Press SOURCES to open the Sources menu.
2 - Select one of the item in the source list and
press OK. The TV will show the programme or
content of the device.
3 - Press SOURCES again to close the menu.
One Touch Play
With the TV in standby, you can switch on a disc
player with your TV remote control.
To switch on both disc player and TV from standby
and start playing the disc immediately,
press (play) on the TV remote control. The device
must be connected with an HDMI cable and both TV
and device must have HDMI CEC switched on.
13.2
Options for a TV Input
Some TV input devices offer specific settings.
To set the options for a specific TV input…
1 - Press SOURCES.
2 - Select the TV input in the list and press OK.
3 - Press OPTIONS. You can set the options for
the selected TV input here.
4 - Press OPTIONS again to close the Options
menu.
Possible options…
Controls
With this option you can operate the connected
device with the TV remote control. The device must
be connected with an HDMI cable and both TV and
device must have HDMI CEC switched on.
Device Info
Open this option to view information on the
connected device.
13.3
Scan connections
To rescan connections and update the Sources menu,
press Scan connections. (if key is available
on the bottom of the screen.)
13.4
Game or computer
The device type determines picture and sound styles,
resolution values and other specifics. You don't have
to worry about the ideal settings.
For some devices the type of the device is not that
clear. A game console can have a built-in Blu-ray
Disc player and the type is set to Player because it is
used as a disc player most of the time. For this kind of
devices, you can temporarily switch to the ideal
settings for gaming. Or alternatively, switch to the
ideal settings for a connected computer.
You can only use the setting Game or
Computer when you switch to a connected device in
the Sources menu. The Game or Computer setting is
stored for the selected device.
To switch to the ideal settings for gaming or computer
manually…
1 - Press , select Picture > Advanced and
press OK.
2 - Select Game, Computer or Off.
3 - Press (left) to go back one step or
press BACK to close the menu.
Remember to set this setting back to Off when you
stop playing the game.
40
14
Internet
14.1
Start Internet
You can browse the Internet on your TV. You can
view any Internet website but most of them are not
prepared for a TV screen.
• Some plug-ins (e.g. to view pages or videos) are not
available on your TV.
• You cannot send or download files.
• Internet pages are shown one page at a time and
full screen.
To start the Internet browser…
1 - Press Home > Utilities, and press OK.
2 - Select Internet and press OK.
3 - Enter an Internet address and press OK.
4 - To close Internet, press Home or EXIT.
41
15
Videos, photos and
music
15.1
From a USB connection
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard
Drive.
With the TV switched on, plug in a USB flash drive or a
USB Hard Drive to one of the USB connections. The
TV detects the device and will list your media files.
If the list of files does not appear automatically…
1 - Press SOURCES, select USB and
press OK.
2 - Select USB Devices and press (right) to
select the USB device you need.
3 - You can browse your files in the folder structure
you have organised on the drive.
4 - To stop playing videos, photos and music,
press EXIT.
Warning
If you try to pause or record a programme with a USB
Hard Drive connected, the TV will ask you to format
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive.
15.2
From a computer
If the TV and the computer are in the same network,
the TV can browse and play files stored on your
computer.
On your computer, you need to install media server
software like Twonky™ to share your files with the TV.
The TV shows your files and folders as they are
organised on your computer.
To browse the files on your computer,
press SOURCES , select Browse network and
press OK.
15.3
Menu bar and sorting
With a USB device connected, the TV sorts the files by
type. Navigate to the menu bar and select the type of
file you are looking for.
If you browse files from a computer, you can only
browse the files and folders as they are organized on
the computer.
The menu bar
Navigate to the menu bar and select the type of file
you want to watch or play.
Select Photos , Music or Videos .
Alternatively, you can open the Folders view
and browse your folders to look for a file.
Sorting
To browse your photos by date, month, year or
alphabetically by name, press Sort .
To browse your music by album, artist, genre or
alphabetically by name, press Sort .
Videos are sorted alphabetically.
15.4
Play your videos
Play videos
• To play a video, select Videos in the menu bar,
select a video and press OK.
• If there are more videos in the same folder,
press Play all to play all videos in this folder.
• To jump to the next or previous
video, press + or - .
• To pause the video, press OK. Press OK again to
continue.
• To make a 10-second jump forward or backward in a
video, press or .
• To rewind or go fast forward, press or . Press
the keys several times to speed up - 2x, 4x, 8x, 16x,
32x.
• To stop the video playback, press (Stop).
Info
To view info on a video (playhead position, duration,
title, date, etc.), select the video and press INFO .
Press again to hide the info.
Video options
During the video playback, press OPTIONS to…
• Subtitles – If available, you can switch
subtitles On, Off or On During Mute.
• Shuffle – Play your files in a random order.
• Repeat – Plays all videos in this folder once or
continuously.
42
15.5
View your photos
View photos
To view photos, select Photos in the menu bar,
select a photo thumbnail and press OK.
If there are several photos in the same folder, select a
photo and press Slide show to start a slide show
of all photos in this folder.
To jump to the next or previous photo,
press + or - .
To stop the slide show or close the photo,
press (Stop).
Info
To view info on a photo (size, creation date, file path,
etc.), select a photo and press INFO .
Press again to hide the info.
Slideshow with music
You can watch a slideshow of your photos and listen
to your music at the same time. You must start the
music before you start the photo slideshow.
To play music with the slide show…
1 - Select a song or a folder with songs and
press OK.
2 - Press INFO to hide the browser list.
3 - Press BACK .
4 - Now use the navigation arrows to select the
folder with photos.
5 - Select the folder with photos and press Play
All.
6 - To stop the slideshow, press BACK .
Photo options
With a photo on screen, press OPTIONS to…
• Shuffle – Play your files in a random order.
• Repeat – Play the slide show once or continuously.
• Slide show speed – Set the speed of the slide
show.
• Slide show transition – Set the style of the photo
transitions.
15.6
Play your music
Play music
• To play music, select Music in the menu bar,
select a song and press OK.
• If there are more songs in the same folder,
press Play all to play all songs in this folder.
• To jump to the next or previous song, press +
or - .
• To pause the music, press OK. Press OK again to
continue.
• To make a 10-second jump in a song or 10-second
jump back, press or .
• To rewind or fast forward, press or . Press the
keys several times to speed up - 2x, 4x, 8x, 16x, 32x.
• To stop the music playback, press (Stop).
Info
To view song info (title, artist, duration, etc.), select
the song and press INFO .
Press again to hide the info.
Music options
Options for playing music...
• Shuffle – Play your files in a random order.
• Repeat – Plays all songs in this folder once or
continuously.
43
16
Smartphones and
tablets
16.1
Philips TV Remote App
The new Philips TV Remote App on your smartphone
or tablet is your new TV buddy.
With the TV Remote App, you master your media
around you. Send photos, music or videos to your big
TV screen or watch any of your TV channels live on
your tablet or phone. Look up what you want to
watch on the TV Guide and watch it on your phone or
TV. With the TV Remote App you can use your phone
as a remote control.
Download the Philips TV Remote App from your
favourite app store today.
The Philips TV Remote App is available for iOS and
Android and is free of charge.
Wi-Fi Smart Screen
To watch digital TV channels on your smartphone or
tablet with the Philips TV Remote App, you must
switch on Wi-Fi Smart Screen. For more information,
in Help, press the colour key Keywords and look
up Wi-Fi smart screen.
16.2
Miracast
About Wi-Fi Miracast
You can view your photos or play your music and
videos from a mobile device on your TV with Wi-Fi
Miracast™. The mobile device and the TV should be
within range, which usually means being in the same
room.
Check if your mobile device is ready for Miracast.
Your TV is a Wi-Fi CERTIFIED Miracast™ device.
With Miracast™, you can watch and share the screen
of your smartphone, tablet or computer on your TV
screen wirelessly. You can stream videos (audio and
video), share photos or anything else that's on screen
of the device. No need to connect the device to your
home network. Both the TV and the device must be
Wi-Fi CERTIFIED Miracast™ devices and have
Miracast switched on.
Miracast on this TV is subject to the HDCP protocol
and cannot display copy-protected premium content
sent by a device. The maximum video resolution
supported is 720p for 2.4GHz Wi-Fi or 1080p for 5GHz
Wi-Fi.
For more information on Wi-Fi CERTIFIED Miracast™
go to www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi
CERTIFIED Miracast™, Miracast™ are trademarks of
the Wi-Fi Alliance.
Switch on Miracast
Make sure Wi-Fi Miracast is switched on.
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Wi-Fi Miracast and press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Share a screen on TV
To share the screen of your smartphone, tablet or
computer on the TV…
1 - Switch on the TV.
2 - On the device, in the settings menu, set the
device to cast or mirror its display. Miracast uses Wi-Fi
Direct™.
3 - On the device scan for the available Miracast
devices and select the TV to connect.
4 - On the TV, agree to the request to connect. You
might be asked to enter a PIN code from the device
on the TV - enter the numbers with the digit keys on
the remote control. Alternatively, you might be asked
to enter a PIN code on the device. If the connection is
made, the TV will show the screen of the device.
5 - On the device, select the videos, photos or files
you want to watch on TV.
* Miracast is supported by WiDi 3.5 onwards.
You might find the Wi-Fi connection (e.g.
'DIRECT_tvname') also in lists of available networks
on other network devices, e.g. your laptop computer.
However, this connection can only be used by Wi-Fi
Miracast devices.
Stop sharing
You can stop sharing a screen from the TV or from the
mobile device.
From the device
With the application you use to start Miracast, you
can disconnect and stop watching the screen of the
device on TV. The TV will switch back to the last
selected programme.
44
From the TV
To stop watching the screen of the device on TV, you
can . . .
• press EXIT to watch a TV broadcast
• press Home to start another activity on TV
• press SOURCES to open the Sources menu
and select a connected device.
Block a device
The first time you receive a request to connect from a
device, you can block the device. The request from
this device and all its requests in the future, will be
ignored.
To block a device…
Select Block… and press OK.
Unblock all devices
All previously connected and also blocked devices
are stored in the Wi-Fi Miracast list of connections. If
you clear this list, all blocked devices will be
unblocked.
To unblock all blocked devices…
1 - Press , select Network and press OK.
2 - Select Reset Wi-Fi Miracast connections and
press OK. The list is cleared.
3 - Press (left) repeatedly if necessary, to close
the menu.
Blocking a previously connected device
If you want to block a device that you previously
connected, you need to clear the Wi-Fi Miracast
connections list first. If you clear this list, you will have
to confirm or block the connection for every device
again.
Screen delay
The normal delay when sharing a screen with
Miracast is about 1 second. The delay might be longer
if you are using older devices with less processing
power.
16.3
MHL
This TV is MHL™ compliant.
If your mobile device is also MHL compliant, you can
connect your mobile device with a MHL cable to the
TV. With the MHL cable connected you can share
what's on your mobile device on the TV screen. Your
mobile device charges its battery at the same time.
The MHL connection is ideal for watching movies or
playing games from your mobile device on TV for a
longer time.
Charging
With the MHL cable connected, your device will
charge while the TV is switched on (not in standby).
MHL Cable
You need a passive MHL cable (HDMI to Micro USB)
to connect your mobile device to the TV. You might
need an extra adapter to connect to your mobile
device. To connect the MHL cable to the TV use
the HDMI 4 MHL connection.
MHL, Mobile High-Definition Link and the MHL Logo
are trademarks or registered trademarks of the MHL,
LLC.
In Help, press Keywords and look up HDMI
MHL for more information.
16.4
Smart TV
About Smart TV
Connect this TV to the Internet and discover a new
world of television. You can make a wired connection
to your router or you can link up wirelessly with Wi-Fi.
With the TV connected to your home network, a
smartphone can show a photo on TV, you can play
videos stored on your computer or control the TV with
your tablet.
With your TV connected to the Internet, you can
watch a rental video from an online video store, read
the online TV guide or record your favourite TV show
on a USB Hard Drive. The Smart TV Apps add to the
fun with all sorts of entertainment and convenient
services.
What you need
To enjoy Smart TV Apps you must connect the TV to
a router with a high-speed (broadband) connection
to the Internet. You can use a home network
connected to the Internet. You do not need a
computer.
For more information, press Keywords and look
up Network.
45
Tip
To enter text or to navigate an Internet page more
easily, you can consider to connect a USB keyboard
and a USB mouse to the TV.
For more information, press Keywords and look
up USB keyboard or USB mouse.
Setup Smart TV
The first time you open Smart TV, you need to
configure your connection. Read and agree to the
terms and conditions to continue. If you do not want
to set up Smart TV, press BACK.
Parental control
To lock Adult 18+ rated apps . . .
1 - Switch on Smart TV parental control by
selecting Enable and then press OK.
2 - Enter an unlock PIN code of your choice.
3 - Confirm your PIN code.
Adult 18+ rated apps are now locked. To open a
locked app, select the app and press OK. The TV will
ask you to enter your 4-digit code.
Smart TV Apps
Open Smart TV
The Smart TV start page is your link to the Internet.
You can rent movies online, read newspapers, watch
videos and listen to music, also shop online, or watch
TV programmes when it suits you with Online TV.
To do this, you open Apps - Internet sites which are
tailored for TV. With your TV connected to the
Internet, you can open Smart TV.
Open Smart TV
To open the Smart TV start page, press Smart TV .
Alternatively, you can press Home > Utilities,
select Smart TV and press OK.
The TV connects to the Internet and opens the Smart
TV start page. This may take a few seconds.
Close Smart TV
To close the Smart TV start page,
press Home and select another activity.
TP Vision Europe B.V. bears no responsibility
regarding the content and the quality of the content
provided by the content service providers.
Smart TV start page
1 - Now on your TV
2 - Your Apps
3 - App gallery
4 - Internet
5 - Recommended Apps
6 - Search
7 - Colour keys for control
Your Apps
You start Apps from the Smart TV start page. If the
start page does not hold any Apps yet, you can add
Apps from the App gallery.
App gallery
In the App gallery you find all available Apps.
Internet
The Internet App opens the World Wide Web on your
TV.
On your TV, you can view any Internet website but
most of them are not tailored for a TV screen.
- Some plug-ins (e.g. to view pages or videos) are not
available on your TV.
- Internet pages are shown one page at a time and
full screen.
Recommended Apps
In this window, Philips presents a range of
recommended Apps for your country, Apps for Online
TV or a selection of rental movies from Video stores.
You can select and open them from the
Recommended Apps window.
Search
With Search, you can search the App gallery for
relevant Apps.
Enter a keyword in the text field, select and
press OK to start searching. You can enter names,
titles, genres and description keywords to search.
Alternatively, you can leave the text field empty and
search for the most popular searches/keywords for a
range of categories. In the list of found keywords,
select a keyword and press OK to search for items
with that keyword.
Open an App
To open an App, you must add it to your list of Apps
in the Smart TV start page first.You can add Apps to
your list from the App gallery.
The list of your Apps on the Smart TV start page can
be several pages long. Use the arrow keys to go to the
next or previous page. Alternatively,
press + (Next page) or - (Previous page).
Open an App
46
To open an App . . .
1 - Press Home > Utilities > Smart TV .
2 - On the start page, select an App icon and
press OK.
In an App, press BACK to go back 1 step or page.
Close an App
To close an App and return to the Smart TV start
page, press Smart TV .
Reload an App page
If an App page did not load properly,
press OPTIONS and select Reload to reload
the page.
Zoom
To zoom in on an App page . . .
1 - Press OPTIONS and select Zoom page.
2 - Use the slider bar to set the zoom level.
3 - Return to normal view by resetting the slider bar.
View security info
You can check the security level of an App page.
On an App page, press OPTIONS and
select Security info. If a lock is shown next to the
loading animation on the bottom of the screen while
loading a page, the transfer is secured.
Feedback on an App
Select the App and press Feedback to select a
'like' or 'don't like' button and send a suggestion or
remark to us. You can also report an App malfunction.
Manage your Apps
In the list of Apps on the Smart TV start page you can
. . .
• Remove an App
To remove an App from the list, select the App icon
and press Remove . The App is still available in
the App gallery.
• Move an App
To reposition an App in the list, select the App icon,
press Move and use the arrow keys to reposition
the App. Press OK to confirm the position.
• Lock an App
To lock an App, select the App icon and
press Lock .
When you lock an App, you must enter the 4 digit PIN
code you set for Parental control when you
configured Smart TV. In the list, a locked App is
marked with a lock .
To unlock an App, select the App icon and
press Unlock . You must enter the 4 digit PIN code
to unlock.
App gallery
Open the App gallery in Smart TV to browse the
Apps, the collection of tailored websites for TV.
Find the App for YouTube videos, a national
newspaper, an online photo album, etc. There are
Apps to rent a video from an online video store and
Apps for watching programmes you missed. If the
App gallery does not hold what you are looking for,
try the World Wide Web and surf the Internet on TV.
Rental video Apps
With the video store Apps in Smart TV, you can rent
your favourite movie from an online rental video
store. You can pay securely with your credit card.
Rent a movie
1 - Open a Video store App in your list of Apps or
select a recommended video on the Smart TV start
page.
2 - Select a movie.
3 - Make the online payment.
4 - Start watching. You can use the (Play)
and (Pause) keys.
Most Video stores ask you to create a login account.
Streaming video
With this TV, you can watch rental movies sent as a
streaming video format. You can almost instantly
watch the movie. You might need a USB Hard Drive to
store some video buffer. If you have a USB Hard
Drive connected, you can also download rental
movies from video stores that offer movie
downloading only. You can pause or restart a
downloaded rental movie. Consult the video store
regarding the rental duration of rental movies.
Internet traffic
Streaming or downloading many videos may exceed
your monthly Internet traffic limit.
Online TV
With the Online TV App on the Smart TV start page*,
you can watch TV programmes you missed or watch
programmes whenever it suits you best.
Open Online TV
To open the Online TV App . . .
1 - Press Smart TV .
2 - On the start page, select the Online TV icon
and press OK.
3 - Select a programme on the page and
press OK to start watching. You can use
the (Play) and (Pause) keys.
47
List per broadcaster
To view the Online TV programmes ordered by
broadcaster, press All broadcasters .
Select a broadcaster and press OK.
* If available in your region.
Multi View
While you are on a Smart TV App or the Internet, you
can watch the current TV channel. Multi view opens
a small screen for the TV channel next to the Smart
TV screen.
To open Multi view…
1 - Press SMART TV to open Smart TV.
2 - Press MULTI VIEW to open the small screen.
3 - Press + or – to change the TV channel
in the small screen.
Reset Smart TV
To reset your connection with Smart TV, clear the
Internet memory on the TV.
You will clear your Philips Smart TV registration and
parental rating setting, your video store app logins, all
Smart TV app favourites, Internet bookmarks and
history.
To clear the Internet memory…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Clear Internet memory and press OK.
3 - Select OK to confirm.
4 - Press (left) repeatedly if necessary, to close
the menu.
48
17
Multi room
17.1
About Multi room
With Multi Room you can watch a TV programme that
comes from another TV in your home. The
programme is streamed from one TV to the other. You
can stream a programme to a TV that has no antenna
connection or has no Smart card subscription of its
own. You can also stream a recorded programme
from a TV with a connected Hard Drive.
The TV that streams the programme to the other TV,
must be switched on and must tune to the channel or
play the recording.
Streaming a TV programme with Multi Room will
reduce the picture resolution to 720p maximum. You
cannot stream radio channels. Some broadcasters
protect their programmes to prevent this kind of
streaming.
17.2
What you need
To stream a TV programme from one TV to another,
the programme must come from a digital TV channel.
Both TVs must be connected to your wireless home
network. For more information,
press Keywords and look up Wireless Network.
Also, both TVs must have a Philips model number
that ends with an 8 or higher - e.g. xxXXXxxx8. It
might be necessary to update the older TV with its
latest software. On the older TV, read the Help
chapter on updating software.
Make sure that both TVs have the setting Switch on
with Wi-Fi (WoWLAN) switched on in the TV setup.
To check this setting on this TV…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Switch on with Wi-Fi (WoWLAN) and
press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
17.3
Using Multi room
First time use
When you start Multi room for the first time, switch on
both TVs.
Once this TV made a connection with the other TV,
the other one will appear automatically in
the Browse network menu even when it's in
standby.
Stream a TV channel
With Multi room, you can watch the current TV
channel or open the channel list of the other TV. If
you select a channel from the list, the other TV will
also switch to the channel you selected. If the other
TV has a build-in satellite tuner with installed
channels or a connected Hard Disc Drive (HDD) with
recordings*, you can also watch these on this TV. You
cannot switch channels while the other TV is
recording, in Pause TV mode or using Skype.
To watch a TV channel from the other TV . . .
1 - Make sure the other TV is in standby* or switched
on.
2 - On this TV, press SOURCES , select Browse
network and press OK.
3 - If the TV is not yet connected to your home
network, the network installation will start
automatically. If the TV is already connected, go to
step 4.
4 - In the Browse network menu, select the name
of the other TV and press OK. If you have several TVs
in your home, you might want to change the name of
the other TV. You can do that on the TV itself.
5 - Select what you want to watch from the other TV
. . .
• to watch the current channel of the other TV,
select Current channel and press OK.
• to open the channel list of the other TV,
select Watch TV and press (Right).
• to open the satellite channel list of the other TV,
select Watch satellite and press (Right).
• to open the list of recordings* on the other TV,
select Watch recordings and press (Right).
• you can switch channels with + and -. You
cannot switch channels when the other TV is
recording, in Pause TV mode or using Skype.
* To switch on the other TV from standby or to watch
its recordings from a connected HDD, both TVs must
have a type number that ends with an 8 or higher -
e.g. xxXXXxxx8 or xxXXXxxx9.
49
TV network name
If you have more than one TV in your home network,
you can give the TV a unique name.
To change the TV name…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select TV network name and press OK.
3 - Enter the name with the on-screen keyboard.
4 - Select Done to confirm the change.
5 - Press (left) repeatedly if necessary, to close
the menu.
50
18
Settings
18.1
Quick settings
Eco settings
For more information, in Help, press the colour
key Keywords and look up Eco settings.
Picture style
For more information, in Help, press the colour
key Keywords and look up Picture style.
Picture format
For more information, in Help, press the colour
key Keywords and look up Picture format.
Sound style
For more information, in Help, press the colour
key Keywords and look up Sound style.
Headphones volume
For more information, in Help, press the colour
key Keywords and look up Headphones
volume.
Speakers
For more information, in Help, press the colour
key Keywords and look up TV speakers.
Clock
For more information, in Help, press the colour
key Keywords and look up Clock.
Sleep timer
For more information, in Help, press the colour
key Keywords and look up Sleep timer.
18.2
Picture
Picture style
Select a style
For easy picture adjustment, you can select a preset
Picture Style.
1 - While watching a TV channel, press .
2 - Select Picture > Picture style, and select one of
the styles in the list.
3 - Press (left) repeatedly if necessary, to close
the menu.
The available styles are…
• Personal - The picture preferences you set during
the first start up.
• Vivid - Ideal for daylight viewing
• Natural - Natural picture settings
• Standard - Most energy conscious setting - Factory
setting
• Movie - Ideal for watching movies
• Photo - Ideal for viewing photos
Customise a style
Any picture setting you adjust, like Colour or Contrast,
is stored in the currently selected Picture style. It
allows you to customise each style.
Only the style Personal can save its settings for
each connected device in the Sources menu.
Restore a style
The selected style will store the changes you made.
We recommend to adjust the picture settings for the
style Personal only. The Picture Style - Personal can
save its settings for each individual connected device
in Sources menu.
To restore the style to its original setting…
1 - While watching a TV channel, press .
2 - Select Picture > Picture style, and select the
Picture Style you want to restore.
3 - Press the colour key Restore style , and press
OK. The style is restored.
4 - Press (left) repeatedly if necessary, to close
51
the menu.
Home or Shop
If the Picture style is switched back to Vivid every
time you switch on the TV, the TV location is set
to Shop. A setting meant for in-store promotion.
To set the TV for Home use…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Location > Home and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Picture settings
Colour
With Colour, you can adjust the colour saturation of
the picture.
To adjust the colour…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Colour and press (right) .
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Contrast
With Contrast, you can adjust the contrast of the
picture.
To adjust the contrast…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Contrast and press (right).
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Sharpness
With Sharpness, you can adjust the level of
sharpness in fine detail of the picture.
To adjust the sharpness…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Sharpness and press (right).
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Advanced picture settings
Game or computer
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
If you have a game console with a built-in Blu-ray
Disc player, you might have set the type name to Blu-
ray Disc. With Game or computer you can switch to
the ideal settings for gaming manually. Don't forget to
switch the Game or Computer setting off, when you
return to watch TV.
To switch to the ideal settings for gaming or computer
manually…
1 - Press , select Picture > Advanced and
press OK.
2 - Select Game, Computer or Off.
3 - Press (left) to go back one step or
press BACK to close the menu.
Colour settings
Colour enhancement
With Colour enhancement, you can enhance the
colour intensity and the details in bright colours.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Colour > Colour
enhancement and press OK.
3 - Select Maximum, Medium, Minimum or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Colour temperature
With Colour temperature, you can set the picture to a
preset colour temperature or select Custom to set a
temperature setting yourself with Custom colour
temperature. Colour Temperature and Custom Colour
Temperature are settings intended for expert users.
To select a preset…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Colour > Colour
temperature and press OK.
52
3 - Select Normal, Warm or Cool. Or
select Custom if you want to customise a colour
temperature yourself.
4 - Press (left) repeatedly if necessary, to close
the menu.
Custom colour temperature
With Custom colour temperature, you can set a
colour temperature yourself. To set a custom colour
temperature, first select Custom in the Colour
Temperature menu. Custom Colour Temperature is a
setting intended for expert users.
To set a custom colour temperature…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Colour > Custom colour
temperature and press OK.
3 - Press the arrows (up) or (down) to adjust
the value. WP is white point and BL is black
level. You can also select one of the presets in this
menu.
4 - Press (left) repeatedly if necessary, to close
the menu.
Contrast settings
Contrast modes
With Contrast Mode, you can set the level at which
power consumption can be reduced by dimming the
intensity of the screen. Choose for the best power
consumption or for the picture with the best intensity.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Contrast > Contrast
mode and press OK.
3 - Select Standard, Best power, Best picture,
or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Dynamic contrast
With Dynamic Contrast, you can set the level at
which the TV automatically enhances the details in
the dark, middle and light areas of the picture.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Contrast > Dynamic
contrast and press OK.
3 - Select Maximum, Medium, Minimum or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Brightness
With Brightness, you can set the level of brightness
of the picture signal. Brightness is a setting intended
for expert users. We recommend non-expert users to
adjust the brightness of the picture with
the Contrast setting.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2
- Select Advanced > Contrast > Brightness, and
press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Video contrast
With Video Contrast, you can decrease the range of
the video contrast.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Contrast > Video
contrast, and press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Gamma
With Gamma, you can set a non-linear setting for
picture luminance and contrast. Gamma is a setting
intended for expert users.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Contrast > Gamma, and
press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
53
Sharpness settings
Ultra Resolution
With Ultra Resolution, you switch on a superior
sharpness in line edges and contours.
To switch on or off…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Sharpness > Ultra
Resolution, and press OK.
3 - Select On or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Noise reduction
With Noise reduction, you can filter out and reduce
the level of image noise.
To adjust the noise reduction…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Sharpness > Noise
reduction, and press (right) to enter the menu.
3 - Select Maximum, Medium, Minimum or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
MPEG artefact reduction
With MPEG artefact reduction, you can smoothen
the digital transitions in the picture. MPEG artefacts
are mostly visible as small blocks or jagged edges in
images.
To reduce the MPEG artefacts…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Sharpness > MPEG
artefact reduction, and press (right) to enter the
menu.
3 - Select Maximum, Medium, Minimum or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Motion settings
Natural motion
With Natural motion, you can reduce the motion
judder, visible in movies on TV. Natural Motion makes
any movement smooth and fluent.
To adjust the motion judder…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Motion > Natural
motion, and press OK.
3 - Select Maximum, Medium, Minimum or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Picture format
Fill the screen settings
If the picture is not filling the whole screen, if black
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen
completely.
To select one of the basic settings to fill the screen…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Picture format and press (right).
3 - Select Fill screen, Fit to screen or Wide
screen, and press OK.
4 - Press BACK to close the menu.
• Fill screen – automatically enlarges the picture to
fill the screen. Picture distortion is minimal, subtitles
remain visible. Not suitable for PC input. Some
extreme picture formats can still show black bars.
• Fit to screen – automatically zooms in the picture
to fill the screen without distortion. Black bars may be
visible. Not suitable for PC input.
Advanced
If the two basic settings are inadequate to format the
picture you want, you can use the advanced settings.
With the advanced settings you manually format the
picture on your screen.
You can zoom, stretch and shift the picture until it
shows what you need – e.g. missing subtitles or
scrolling text banners . If you format the picture for a
specific Source – like a connected game console –
you can return to this setting the next time you use
the game console. The TV stores the last setting you
did for each connection.
To format the picture manually…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Picture format and press (right).
3 - Select Advanced and press OK.
4 - Use Shift, Zoom, Stretch or Original to adjust
the picture. Select Undo to return to the setting the
picture had when you opened Picture Format.
• Last setting – Select to return to the last setting.
• Shift – Select on the arrows to shift the picture. You
can only shift the picture when it is zoomed in.
54
• Zoom – Select on the arrows to zoom in.
• Stretch – Select on the arrows to stretch the
picture vertically or horizontally.
• Original – Shows the original format of the
incoming picture. This is a 1:1 pixel on pixel format.
Expert mode for HD and PC input.
• Undo – Select to return to the picture format you
started with.
18.3
Sound
Sound style
Select a style
For easy sound adjustment, you can select a preset
setting with Sound Style.
1 - While watching a TV channel, press .
2 - Select Sound and press (right) to enter the
menu.
3 - Select Sound style, and select one of the styles
in the list.
4 - Press (left) repeatedly if necessary, to close
the menu.
The available styles are…
• Personal - The sound preferences you set during
the first start up.
• Original - Most neutral sound setting
• Movie - Ideal for watching movies
• Music - Ideal for listening to music
• Game - Ideal for gaming
• News - Ideal for speech
Restore a style
With a Sound Style selected, you can adjust any
sound setting in Setup > Sound…
The selected style will store the changes you made.
We recommend to adjust the sound settings for the
style Personal only. The Sound Style - Personal can
save its settings for each individual connected device
in Sources menu.
To restore the style to its original setting…
1 - While watching a TV channel, press .
2 - Select Sound and press (right) to enter the
menu.
3 - Select Sound style , and select the Sound Style
you want to restore.
4 - Press the colour key Restore style. The style
is restored
5 - Press (left) repeatedly if necessary, to close
the menu.
Sound settings
Bass
With Bass, you can adjust the level of low tones in
the sound.
To adjust the level…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Bass and press (right).
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Treble and press (right).
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Surround mode
With Surround Mode, you can set the sound effect of
the TV speakers.
To set the surround mode…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Surround mode and press (right) to
enter the menu.
3 - Select Stereo or Incredible surround.
4 - Press (left) repeatedly if necessary, to close
the menu.
Advanced sound settings
Auto volume levelling
With Auto Volume Levelling, you can set the TV to
automatically level out sudden volume differences.
Typically at the beginning of adverts or when you are
switching channels.
To switch on or off…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced and press (right) to enter
55
the menu.
3 - Select Auto volume levelling and
press (right) to enter the menu.
4 - Select On or Off.
5 - Press (left) repeatedly if necessary, to close
the menu.
Delta volume
With Delta volume, you can set the TV to
automatically level out sudden volume differences.
To adjust the value…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced and press (right) to enter
the menu.
3 - Select Delta volume and press (right) to
enter the menu.
4 - Press the arrows (up) or (down) to adjust
the value.
5 - Press (left) repeatedly if necessary, to close
the menu.
TV speakers
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
• If you select TV speakers > Off, you permanently
switch off the TV speakers.
• If you select TV speakers > On, the TV speakers
are always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound
to the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
• If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink Autostart selected, you can
still switch to TV speakers if necessary.
To set the TV speakers…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced and press (right) to enter
the menu.
3 - Select TV speakers and press (right) to
enter the menu.
4 - Select On, Off, EasyLink,
or EasyLink autostart .
5 - Press (left) repeatedly if necessary, to close
the menu.
To switch to speakers directly…
1 - While watching TV, press .
2 - Select Quick settings > Speakers and
select TV or Amplifier (audio system).
3 - Press (left) repeatedly if necessary, to close
the menu.
Clear sound
With Clear Sound, you improve the sound for
speech. Ideal for news programmes. You can switch
the speech improvement on or off.
To switch on or off…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Clear sound and press OK.
3 - Select On or Off, then press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio out format
For more information, in Help, press the colour
key Keywords and look up Audio out format.
Audio out levelling
For more information, in Help, press the colour
key Keywords and look up Audio out levelling.
HDMI 1 - ARC
To switch on or off…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > HDMI 1 - ARC and
press OK.
3 - Select On or Off, then press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio out delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the picture,
you must switch off Audio Out Delay on the TV.
To switch off Audio Out Delay…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out delay and
press OK.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
56
For more information, in Help, press the colour
key Keywords and look up Audio out delay.
Audio out offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with Audio
Out Offset.
To synchronise the sound on the TV…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out offset and
press OK.
3 - Use the slider bar to set the sound offset and
press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
For more information, in Help, press the colour
key Keywords and look up Audio out offset.
Headphone volume
With Headphones Volume, you can set the volume
of a connected headphone separately.
To adjust the volume…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Headphones volume and press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
TV placement
As part of the first installation, this setting is set to
either On a TV stand or On the wall. If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select TV placement and press OK.
3 - Select On a TV stand or On the wall.
4 - Press (left) repeatedly if necessary, to close
the menu.
18.4
Eco settings
Energy saving
Eco settings bundles the settings that help the
environment.
Energy Saving
If you select Energy Saving, the TV switches to Picture
Style - Standard automatically, the most ideal energy
conscious setting for the picture.
To set the TV in Energy Saving…
1 - Press , select Eco settings and
press (right) to enter the menu.
2 - Select Energy saving, the Picture style is set to
Standard automatically.
3 - Press (left) repeatedly if necessary, to close
the menu.
Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
To only switch off the TV screen…
1 - Press , select Eco settings and
press (right) to enter the menu.
2 - Select Screen off.
3 - Press (left) repeatedly if necessary, to close
the menu.
To switch the screen back on, press any key on the
remote control.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer …
1 - Press , select Eco settings and
press (right) to enter the menu.
2 - Select Switch off timer and press OK.
3 - Press the arrows (up) or (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
57
4 - Press (left) repeatedly if necessary, to close
the menu.
For more information on environmentally friendly TV
settings, in Help, press the colour
key Keywords and look up Eco settings.
18.5
General settings
Languages
In Help, press Keywords and look
up Language settings for more information.
Clock
In Help, press Keywords and look up Clock
settings for more information.
Sleep timer
For more information, in Help, press the colour
key Keywords and look up Sleep timer.
Switch off timer
For more information, in Help, press the colour
key Keywords and look up Switch off timer.
EasyLink
EasyLink
To switch off EasyLink completely…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select EasyLink, press (right) and
select EasyLink one step further.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
EasyLink remote control
To switch off EasyLink remote control…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select EasyLink > Easylink remote control, and
press OK.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
HDMI Ultra HD
This TV can display Ultra HD signals. Some devices -
connected with HDMI - do not recognise a TV with
Ultra HD and might not work correctly or show
distorted picture or sound. To avoid the
malfunctioning of such a device, you can set the
signal quality to a level the device can handle. If the
device is not using Ultra HD signals, you can switch
off Ultra HD for this HDMI connection.
The setting UHD 4:4:4/4:2:2 allows UHD YCbCr 4:4:4
/ 4:2:2 signals. The setting UHD 4:2:0 allows UHD
YCbCr 4:2:0 signals.
To set the signal quality…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select HDMI Ultra HD > HDMI 3 & 4 and
press OK.
3 - Select UHD 4:4:4/4:2:2, UHD
4:2:0 or UHD Off and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
USB keyboard settings
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard layout first, you
can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout
was selected…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select USB keyboard settings, and press OK to
start the keyboard setup.
Mouse settings
To Adjust the motion speed of the USB mouse.…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Mouse settings, and press OK to start
the mouse speed setup.
58
Home or Shop
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner. Picture
style is set to Vivid automatically. Switch off
timer is switched off.
To set the TV to Shop location…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Location > Shop, and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
If you use the TV at home, set the TV in Home
location.
Shop setup
If the TV is set to Shop, you can set the availablility of
a specific demo for in store use.
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Shop setup and press (right) to enter
the menu.
3 - Select banner, and select Commercial banner
or Promotional banner as in store demo.
4 - Press (left) repeatedly if necessary, to close
the menu.
TV Guide
For more information, in Help, press the colour
key Keywords and look up TV guide, data and
information.
Channel logos
In some countries, the TV can show the channel
logos.
If you do not want these logos to appear, you can
switch them off.
To switch off the logos…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Channel logos and press (right) to
enter the menu.
3 - Select Off and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select HbbTV, and press OK.
3 - Select On or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press OPTIONS and select HBB TV on this
channel and press OK.
3 - Select Off and press OK.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Factory settings and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
1 - Press , select General settings and
select Reinstall TV.
2 - Follow the instructions on screen. The installation
may take a few minutes.
Channel list copy
For more information, in Help, press the colour
key Keywords and look up Channel List Copy,
copy.
59
CAM settings
Switch on operator profile
To switch on operator profile for CI+/CAM for easy
channel installation and updates...
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select CAM Operator profile and press OK.
3 - Select Enable and press OK
4 - Press (left) repeatedly if necessary, to close
the menu.
View CAM profile name
To display profile name of the CAM card connected...
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select CAM profile name and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Universal access
For more information, in Help, press the colour
key Keywords and look up Universal access.
Child lock
Parental rating
To set a minumum age to watch rated programmes...
1 - Press , select Child lock and press (right)
to enter the menu.
2 - Select Parental rating, and select one of the age
in the list.
3 - Press (left) repeatedly if necessary, to close
the menu.
Set code / Change code
The Child Lock PIN code is used to lock or unlock
channels or programmes.
To set the lock code or to change the current code…
1 - Press , select Child Lock and press (right)
to enter the menu.
2 - Select Set code or Change code and
press OK.
3 - Enter a 4 digit code of your choice. If a code is set
already, enter the current Child Lock code and then
enter the new code twice.
4 - Press (left) repeatedly if necessary, to close
the menu.
The new code is set.
Forgotten your Child Lock PIN code?
If you forgot your PIN code, you can override the
current code and enter a new code.
1 - Press , select Child lock and press (right)
to enter the menu.
2 - Select Change code and press OK.
3 - Enter the overriding code 8888.
4 - Now enter a new Child Lock PIN code and enter it
again to confirm.
5 - Press (left) repeatedly if necessary, to close
the menu.
The new code is set.
CAM PIN
For more information, in Help, press the colour
key Keywords and look up CAM PIN.
18.6
Clock and language
Menu language
To change the language of the TV menus and
messages…
1 - Press , select General
settings > Language > Menu language and
press OK.
2 - Select on the language you need.
3 - Press (left) repeatedly if necessary, to close
the menu.
Language preferences
Audio language settings
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to this audio.
If none of the preferred audio languages is available,
you can select another audio language which is
available.
To set the primary and secondary audio language…
1 - Press , select General settings >
Languages > Primary audio or Secondary
audio and press OK.
2 - Select on the language you need.
3 - Press (left) repeatedly if necessary, to close
the menu.
60
To select an audio language when none of your
preferred audio language is available…
1 - Press OPTIONS .
2 - Select Audio language and select on the audio
language you want temporarily.
Subtitles
Switch on
To switch on Subtitles, press SUBTITLE.
You can switch subtitles On, Off or On during
mute.
Or to show subtitles automatically when the
broadcasted programme is not in language – the
language set for the TV – select Automatic. This
setting will also show Subtitles automatically when
you mute the sound.
Subtitle language settings
Digital channels can offer several subtitle languages
for a programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of
these languages are available, the TV will show the
subtitles you selected.
If none of the preferred subtitle languages are
available, you can select another subtitle language
which is available.
To set the primary and secondary subtitle language…
1 - Press , select General
settings > Languages > Primary
subtitles or Secondary subtitles and press OK.
2 - Select on the language you need.
3 - Press (left) repeatedly if necessary, to close
the menu.
To select a subtitle language when none of your
preferred languages are available…
1 - Press OPTIONS .
2 - Select Subtitle language and select on the
language you want temporarily.
Subtitles from Text
If you tune to an analogue channel, you need to
make the subtitles available for each channel
manually.
1 - Switch to a channel and press TEXT to open
Text.
2 - Enter the page number for subtitles, usually 888.
3 - Press TEXT again, to close Text.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open Channel
Info in OPTIONS.
Text / Teletex Languages
Text pages
To open Text/Teletext press TEXT, while you are
watching TV channels.
To close Text, press TEXT again.
Select a Text page
To select a page . . .
1 - Enter the page number with the number keys.
2 - Use the arrow keys to navigate.
3 - Press a colour key to select a colour-coded
subject at the bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press OPTIONS and select T.O.P. overview.
Favourite pages
The TV makes a list of the last 10 Text pages you
opened. You can easily reopen them again in the
Favourite Text pages column.
1 - In Text, select the star in the top left corner of
the screen to show the column of favourite pages.
2 - Press (down) or (up) to select a page
number and press OK to open the page.
You can clear the list with the option Clear favourite
pages.
Search Text
You can select a word and scan Text for all
occurences of this word.
1 - Open a Text page and press OK.
2 - Select a word or number with the arrow keys.
3 - Press OK again to jump immediately to the next
occurence of this word or number.
4 - Press OK again to jump to the subsequent
occurence.
5 - To stop searching, press (up) until nothing is
selected.
Text from a connected device
Some devices that receive TV channels can also offer
Text.
To open Text from a connected device . . .
61
1 - Press , select the device and press OK.
2 - While watching a channel on the device,
press OPTIONS , select Show device keys and
select the key and press OK.
3 - Press BACK to hide the device keys.
4 - To close Text, press BACK again.
Digital Text (UK only)
Some digital broadcasters offer dedicated Digital Text
or interactive TV on their digital TV channels. This
includes normal Text using the number, colour and
arrow keys to select and navigate.
To close Digital Text, press BACK.
Text options
In Text/Teletext, press OPTIONS to select the
following…
• Freeze page
To stop the automatic rotation of subpages.
• Dual screen / Full screen
To show the TV channel and Text alongside each
other.
• T.O.P. overview
To open T.O.P. Text.
• Enlarge
To enlarge the Text page for comfortable reading.
• Reveal
To unhide hidden information on a page.
• Cycle subpages
To cycle subpages when these are available.
• Language
To switch the group of characters that Text uses to
display correctly.
• Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text setup
Text language
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1 - Press , select General
settings > Language > Primary text or Secondary
text and press OK.
2 - Select your preferred Text languages.
3 - Press (left) repeatedly if necessary, to close
the menu.
Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5…
1 - Press TEXT.
2 - With Text/Teletext open on screen,
press OPTIONS.
3 - Select Text 2.5 > Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Clock
Date and time
Automatic
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
When you record programmes - scheduled in the TV
Guide, we recommend not to change the time and
date manually. In some countries, for some network
operators, the Clock setting is hidden to avoid an
incorrect clock setting.
To correct the TV clock automatically...
1 - Press , select General
settings > Clock > Auto clock mode, and
select Country dependent.
2 - Select Daylight savings and select the
appropriate setting.
3 - Press (left) repeatedly if necessary, to close
the menu.
Manual
To set the TV clock manually…
1 - Press , select General
settings > Clock > Auto clock mode, and
select Manual.
2 - Select Date and Time to adjust.
3 - Press (left) repeatedly if necessary, to close
the menu.
Time zone
To set the time zone…
1 - Press , select General
settings > Clock > Time zone, and press OK.
2 - Select one of the time zones.
3 - Press (left) repeatedly if necessary, to close
the menu.
62
Manual time offset
To adjust time offset…
1 - Press , select General
settings > Clock > Manual time offset, and
press OK.
2 - Press the arrows (up) or (down) to adjust
the value.
3 - Press (left) repeatedly if necessary, to close
the menu.
18.7
Universal access
Switch on
With Universal access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind or
partially sighted people.
Switch on
If you did not switch on Universal access during the
installation, you can still switch it on in Universal
access menu.
To switch on Accessibility…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Universal access one step further.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
With Universal access switched on, the
option Universal access is added in the Options
menu.
Hard of hearing
Some digital TV channels broadcast special audio and
subtitles adapted for the hard of hearing or deaf
people. With Hearing impaired switched on, the TV
automatically switches to the adapted audio and
subtitles, if available. Before you can switch
on Hearing impaired, you have to switch
on Universal access.
To switch on Hearing impaired…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Hearing impaired and press (right) to
enter the menu.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
To switch on Hearing impaired while watching TV...
1 - While watching a TV channel,
press OPTIONS , select Universal access and
press OK.
2 - Select Hearing impaired, and select On.
To check whether a hearing impaired audio language
is available, press OPTIONS , select Audio
Language and look for an audio language marked
with a .
If Accessibility does not appear in the Options menu,
switch on Universal access in setup menu.
For more information, in Help, press the colour
key Keywords and look up Universal access.
Audio description
Switch on
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
To be able to set the visually impaired audio and
effects, you have to switch on Audio
description first.
Also, before you can switch on Audio description, you
have to switch on Universal access in setup menu.
With Audio Description, a narrator's commentary is
added to the normal audio.
To switch on the commentary (if available)…
To switch on Audio Description…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio description and press (right) to
enter the menu.
3 - Select Audio description one step further
4 - Select On and press OK.
5 - Press (left) repeatedly if necessary, to close
the menu.
To switch on Audio description while watching TV...
1 - While watching a TV channel,
press OPTIONS , select Universal access and
press OK.
2 - Select Audio description, and select On.
You can check if an audio commentary is available.
In the Options menu, select Audio language and
look for an audio language marked with a .
Speakers/Headphones
With Speakers/Headphones, you can select where
you want to hear the audio commentary.
On the TV speakers only, on the headphones only or
on both.
To set Speakers/Headphones…
63
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio
Description > Speakers/Headphones and press OK.
3 - Select Speakers, Headphones or Speakers +
Headphones and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Mixed volume
You can mix the volume of the normal audio with the
audio commentary.
To mix the volume…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio Description > Mixed volume and
press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio effect
Some audio commentary can hold extra audio
effects, like stereo or fading sound.
To switch on Audio effects (if available)…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio description > Audio effects and
press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Speech
The audio commentary can also hold subtitles for the
words which are spoken.
To switch on these subtitles (if available) . . .
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio description > Speech and press
OK.
3 - Select Descriptive or Subtitles and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
64
19
Networks
For more information, in Help, press the colour
key Keywords and look up Network, for more
information on connecting the TV to a network.
65
20
Channel installation
20.1
Antenna/cable installation
Update channels
Automatic channel update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
To switch off the message at start up . . .
1 - Press , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Automatic channel update and
press OK.
4 - Select Off and press OK.
5 - Press BACK to close the menu.
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
To switch off the message…
1 - Press , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Channel update message and press OK.
4 - Select Off and press OK.
5 - Press BACK to close the menu.
In certain countries, the Automatic channel update is
done while watching TV or on any moment when the
TV is in standby.
Manual channel update
You can always start an channel update yourself.
To start a channel update manually…
1 - Press , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Search for channels and press OK.
4 - Select Start now and press OK.
5 - Select Update channels and press OK.
6 - Press BACK to close the menu.
Reinstall channels
Reinstall all channels
You can reinstall all channels and leave all other TV
settings untouched.
If a PIN code is set, you will need to enter this code
before you can reinstall channels.
To reinstall channels…
1 - Press , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Search for channels and press OK.
4 - Select Start now and press OK.
5 - Select Re-install channels, select Next and
press OK.
6 - Select the country where you are now and
press OK.
7 - Select Antenna (DVB-T) or Cable (DVB-C) .
8 - Select Start and press OK to update channels.
This can take a few minutes.
9 - Press BACK to close the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
1 - Press , select General Settings > Reinstall
TV and press OK.
2 - Enter your PIN code if necessary.
3 - Select Yes and press OK to confirm.
4 - The TV will reinstall completely. All settings will
be reset and installed channels will be replaced. The
installation can take a few minutes.
5 - Press BACK to close the menu.
DVB-T or DVB-C
DVB-T or DVB-C reception
During the channel installation, just before you search
for channels, you selected Antenna (DVB-T) or Cable
(DVB-C). Antenna DVB-T searches for terrestrial
analogue channels and digital DVB-T channels. Cable
DVB-C searches for analogue and digital channels
available from a cable DVB-C operator.
DVB-C Channel Installation
66
For ease of use, all DVB-C settings are set to
automatic.
If your DVB-C operator gave you specific DVB-C
values, the network ID or network frequency, enter
these values when the TV asks for them during
installation.
Channel Number Conflicts
In some countries, different TV channels
(broadcasters) might have the same channel number.
While installing, the TV shows the list with channel
number conflicts. You need to select which TV
channel you want to install on a channel number with
multiple TV channels.
DVB settings
Access DVB settings
1 - Press , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Search for channels and press OK.
4 - Select Start now and press OK.
5 - Select Re-install channels, select Next and
press OK.
6 - Select the country where you are now and
press OK.
7 - Select Cable (DVB-C).
8 - Select Start to search channels, or
select Settings for DVB-C settings .
9 - Press BACK to close the menu.
Network frequency mode
If you intend to use the fast Quick scan method
in Frequency scan to search for channels,
select Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network frequency
With the Network frequency mode set to Manual,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster Quick scan method and use the
predefined settings used by most cable providers in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full scan method. This method will take
more time to search for and install channels.
Frequency step size
The TV searches for channels in steps of 8MHz.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of 1MHz. Using the 1MHz steps will take more
time to search for and install channels.
Digital channels
If you know your cable operator is not offering digital
channels, you can skip searching for digital channels.
Analogue channels
If you know your cable operator is not offering
analogue channels, you can skip searching for
analogue channels.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
Scrambled. If you did not subscribe to pay TV
channels or services, you can select Free
Channels Only .
For more information, in Help, press the colour
key Keywords and look up CAM, conditional
access module.
Reception quality
You can check the quality and signal strength of a
digital channel. If you have your own antenna, you
can reposition the antenna to try and improve the
reception.
To check the reception quality of a digital channel…
1 - Tune to the channel.
2 - Press , select Antenna/Cable Installation and
press OK. Enter your PIN code if necessary.
3 - Select Digital: Reception Test and press OK.
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
67
frequency, position the arrows on a number
with and and change the number
with and . To check the frequency,
select Search and press OK.
If you use DVB-C to receive channels, the
option Symbol rate mode is available. For Symbol
rate mode, select Automatic, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually…
1 - Press , select Antenna/Cable Installation and
press OK. Enter your PIN code if necessary.
2 - Select Analogue: Manual Installation and
press OK.
• System
To set up the TV system, select System.
Select your country or the part of the world where
you are now and press OK.
• Search Channel
To find a channel, select Search Channel and
press OK. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press (right) to select Search and press OK to
search for a channel automatically. The found
channel is shown on screen and if the reception is
poor, press Search again. If you want to store the
channel, select Done and press OK.
• Fine tune
To fine tune a channel, select Fine tune and
press OK. You can fine tune the channel
with or .
If you want to store the channel found,
select Done and press OK.
• Store
You can store the channel on the current channel
number or as a new channel number.
Select Store Current Channel or Store as New
Channel and press OK. The new channel number is
shown briefly.
You can redo these steps until you have found all
available analogue TV channels.
20.2
Channel list copy
Introduction
Channel List Copy is intended for dealers and expert
users.
With Channel List Copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel List Copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA
• Both TVs have compatible software versions.
Current software version
To check the cuurent version of the TV software…
1 - Press , select Update Software and
press (right) to enter the menu.
2 - Select Current Software Info and press OK.
3 - The version, release notes and creation date are
shown. Also, the Netflix ESN Number is shown if
available.
4 - Press (left) repeatedly if necessary, to close
the menu.
Copy a channel list
To copy a channel list…
1 - Switch on the TV. This TV should have channels
installed.
2 - Plug in a USB flash drive.
3 - Press , select General settings > Channel
List Copy and press OK.
4 - Select Copy to USB and press OK. You might
be asked to enter the Child Lock PIN code to copy the
channel list.
5 - When copying is done, unplug the USB flash
drive.
6 - Press (left) repeatedly if necessary, to close
the menu.
Now you can upload the copied channel list onto
another Philips TV.
68
Upload a channel list
To not installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload, press ,
select General settings and press OK.
4 - Select Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, see chapter Reinstall All Channels. Start this
procedure until you reach the country setting.
Press BACK to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. See chapter Reinstall All Channels and
start the installation. Select the correct country and
skip the channels search. Finish the installation. When
done, continue with step 2.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload, press ,
select General settings and press OK.
4 - Select Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
69
21
Software
21.1
Update software
Update from Internet
If the TV is connected to the Internet, you may receive
a message from TP Vision to update the TV software.
You need a high-speed (broadband) Internet
connection.
If you receive this message, we recommend you carry
out the update.
Select Update. Follow the instructions on screen.
You can also look for new updates yourself.
To look for an update . . .
1 - Press , select Update software > Search for
updates, then press OK.
2 - Select Internet, then press OK. Follow the
instructions on screen.
When the update is complete, the TV switches off and
back on again automatically.
Wait for the TV to switch itself back on.
Update from USB
It might be necessary to update the TV software. You
need a computer with an high-speed Internet
connection and a USB memory device to upload the
software on the TV. Use a USB memory device with
512MB free space. Make sure that write protection is
switched off.
1 - Start the update on TV
Press , select Update software > Search for
updates, then press OK.
Select USB and press OK.
2 - Identify the TV
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
3 - Download the TV software
Insert the USB memory into your computer.
On the USB memory device, locate the
file update.htm and double click it.
Click on Send ID.
If new software is available, download the .zip file.
After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
If a power cut occurs during the update, never
remove the USB memory device from the TV. When
the power returns, the update will continue.
At the end of the update, the message Operation
successful appears on screen. Remove the USB
memory device and press on the remote control.
Do not . . .
• press twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then
back on again. Please wait.
The TV software has been updated. You can use the
TV again.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB memory
device.
21.2
Software version
To view the current TV software version…
1 - Press , select Update Software > Current
Software Info and press OK.
2 - The version, Release Version is shown. Also, the
Netflix ESN Number is shown if available.
3 - Press (left) repeatedly if necessary, to close
the menu.
21.3
Local updates
For dealers and expert users…
1 - Press , select Update Software > Local
updates and press OK.
2 - Follow the on-screen instruction.
3 - Press (left) repeatedly if necessary, to close
the menu.
21.4
Look for OAD updates
Search for an Over-the-air software update…
1 - Press , select Update Software > Look for
OAD updates and press OK.
2 - Select Start now. Follow the on-screen
instruction.
70
3 - Press (left) repeatedly if necessary, to close
the menu.
21.5
Open source software
This television contains open source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
offer is requested by the respective licences.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to .
. .
Intellectual Property Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
21.6
Open source license
About open source license
Acknowledgements and License Texts for any open
source software used in this Philips TV.
This is a document describing the distribution of the
source code used on the Philips TV, which fall either
under the GNU General Public License (the GPL), or
the GNU Lesser General Public License (the LGPL), or
any other open source license. Instructions to obtain
source code for this software can be found in the user
manual.
PHILIPS MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. Philips offers no support for this
software. The preceding does not affect your
warranties and statutory rights regarding any Philips
product(s) you purchased. It only applies to this
source code made available to you.
Open source license information
Freetype (2.4.3)
FreeType is a software font engine that is designed to
be small, efficient, highly customizable, and portable
while capable of producing high-quality output
(glyph images).
This piece of software is made available under the
terms and conditions of the FreeType Project license,
which can be found below.
Source: http://freetype.sourceforge.net
zlib (1.2.3)
The 'zlib' compression library provides in-memory
compression and decompression functions, including
integrity checks of the uncompressed data.
This piece of software is made available under the
terms and conditions of the zlib license, which can be
found below.
Source: http://www.zlib.net/
Fraunhofer AAC Ecnoder (3.3.3)
AAC Ecnoder.
Source: Android JB source code
unicode (3.2)
This library is used to perform UNICODE string
manipulation.
This piece of software is made available under the
terms and conditions of the ICU license, which can be
found below.
Source: http://www.icu-project.org/
libpng (1.2.43)
PNG decoder.
This piece of software is made available under the
terms and conditions of the libpng license, which can
be found below.
Source: http://www.libpng.org/pub/png/libpng.html
libjpg (6b)
This library is used to perform JPEG decoding tasks.
This piece of software is made available under the
terms and conditions of the libjpg license, which can
be found below.
Source: http://www.ijg.org/
libmng (1.0.10)
libmng -THE reference library for reading, displaying,
writing and examining Multiple-Image Network
Graphics.MNG is the animation extension to the
popular PNG image-format.
This piece of software is made available under the
terms and conditions of the libmng license, which can
be found below.
Source:
http://sourceforge.net/projects/libmng/files/
u-Boot loader (1.3.4)
71
Used by boot loader and only linked with boot
loader, GPL license.
This piece of software is made available under the
terms and conditions of the u-Boot loader license,
which can be found below.
Source: http://sourceforge.net/projects/u-boot/files/
u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download
Libcurl (7.21.7)
HTTP client;libcurl is a free and easy-to-use client-
side URL transfer library, supporting FTP, FTPS, HTTP,
HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,
LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl
supports SSL certificates, HTTP POST, HTTP PUT, FTP
uploading, HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM,
Negotiate, Kerberos4), file transfer resume, http proxy
tunneling and more!
This piece of software is made available under the
terms and conditions of the Libcurl license, which can
be found below.
Source: http://curl.haxx.se/
c-ares (1.7.4)
c-ares is a C library that performs DNS requests and
name resolves asynchronously.
This piece of software is made available under the
terms and conditions of the c-ares license, which can
be found below.
Source: http://c-ares.haxx.se/c-ares-1.7.1.tar.gz
openssl (1.0.0d)
OpenSSL is an open source implementation of the
SSL and TLS protocols. The core library (written in the
C programming language) implements the basic
cryptographic functions and provides various utility
functions. Wrappers allowing the use of the OpenSSL
library in a variety of computer languages are
available.
This piece of software is made available under the
terms and conditions of the 1.7.4 license, which can be
found below.
Source:
http://www.openssl.org/source/openssl-1.0.0.tar.gz
Expat (2.01)
xml paser; Expat is an XML parser library written in C.
It is a stream-oriented parser in which an application
registers handlers for things the parser might find in
the XML document (like start tags). An introductory
article on using.
This piece of software is made available under the
terms and conditions of the Expat license, which can
be found below.
Source: http://expat.sourceforge.net/
DirectFB include SAWMAN (1.4.0)
It is a software library for GNU/Linux/UNIX based
operating system with a small memory footprint that
provides graphics acceleration, input device handling
and abstraction layer, and integrated windowing
system with support for translucent windows and
multiple display layers on top of the Linux
framebuffer without requiring any kernel
modifications.
This piece of software is made available under the
terms and conditions of the DirectFB license, which
can be found below.
Source: http://sourceforge.net/projects/jointspace/fil
es/remote_applications_SDK/remote_spplications_S
DK_v1.3.1/DirectFB141_source_1.3.1.7z/download
SAWMAN
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
Source: http://squashfs.sourceforge.net/
Linux Kernel (3.0)
The Linux kernel is an operating system kernel used
by the Linux family of Unix-like operating systems.
This piece of software is made available under the
terms and conditions of the Linux Kernel license,
which can be found below.
Source: http://www.kernel.org
SQLite (3.7.2)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
This piece of software is made available under the
terms and conditions of the SQLite license, which can
be found below.
Source: http://www.sqlite.org/download.html
SquashFS (3.4)
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the
terms and conditions of the SquashFS license, which
can be found below.
Source: http://squashfs.sourceforge.net/
glibc (2.6.1)
Any Unix-like operating system needs a C library: the
library which defines the ``system calls'' and other
basic facilities such as open, malloc, printf, exit...The
GNU C library is used as the C library in the GNU
system and most systems with the Linux kernel
This piece of software is made available under the
terms and conditions of the glibc license, which can
be found below.
Source: http://www.gnu.org/software/libc/
72
mtd-utils (1)
The aim of the system is to make it simple to provide
a driver for new hardware, by providing a generic
interface between the hardware drivers and the upper
layers of the system. Hardware drivers need to know
nothing about the storage formats used, such as FTL,
FFS2, etc., but will only need to provide simple
routines for read, write and erase. Presentation of the
device's contents to the user in an appropriate form
will be handled by the upper layers of the system.
This piece of software is made available under the
terms and conditions of the mtd-utils license, which
can be found below.
Source: http://www.linux-
mtd.infradead.org/index.html
libusb (1.0.6)
This is the home of libusb, a library that gives user
level applications uniform access to USB devices
across many different operating systems. libusb is an
open source project licensed under the GNU Lesser
General Public License version 2.1.Many participants
in the libusb community have helped and continue to
help with ideas, implementation, support and
improvements for libusb.
This piece of software is made available under the
terms and conditions of the libusb license, which can
be found below.
Source:
http://libusb.wiki.sourceforge.net
http://www.libusb.org/
libusb-compat (0.1.3)
Library to enable user space application programs to
communicate with USB devices.
This piece of software is made available under the
terms and conditions of the libusb-compat license,
which can be found below.
Source:
http://libusb.wiki.sourceforge.net/LibusbCompat0.1
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform
implementation of the Microsoft Windows NTFS file
system with read-write support. NTFS-3G often uses
the FUSE file system interface, so it can run
unmodified on many different operating systems. It is
runnable on Linux, FreeBSD, NetBSD, OpenSolaris,
BeOS, QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed under
either the GNU General Public License or a
proprietary license. It is a partial fork of ntfsprogs and
is under active maintenance and development.
This piece of software is made available under the
terms and conditions of the NTFS-3G Read/Write
Driver license, which can be found below.
Source: http://www.tuxera.com
WPA Supplicant (0.5.10 & 0.6.7)
These packages are used to provide WiFi access.The
supplier for these tools is Atheros.These pieces of
software are made available under the terms and
conditions of the GPL v2 license, which can be found
below.
This piece of software is made available under the
terms and conditions of the WPA Supplicant license,
which can be found below.
Source: http://hostap.epitest.fi/wpa_supplicant/
ntfsprogs (2.0.0)
Some useful tool for ntfs file sytem.
This piece of software is made available under the
terms and conditions of the ntfsprogs license, which
can be found below.
Source: http://sourceforge.net/projects/linux-ntfs
fuse (2.8.4)
Fuse is a simple interface for userspace programs to
export a virtual filesystem to the linux kernel.
This piece of software is made available under the
terms and conditions of the fuse license, which can
be found below.
Source: http://fuse.sourceforge.net/
libiconv (1.11.1)
This library provides an iconv() implementation, for
use on systems which don't have one, or whose
implementation cannot convert from/to Unicode. .
This piece of software is made available under the
terms and conditions of the libiconv license, which
can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
electric-fence (2.1.13)
Used for memory corruption detection.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: http://perens.com/FreeSoftware/ElectricFenc
e/electric-fence_2.1.13-0.1.tar.gz
liveMedia
When Wifi Display or streaming RtspPlayer are
enabled.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: www.live555.com
QT (4.7.0)
Netflix skpe besttv pandora picasa? will use QT.
This piece of software is made available under the
terms and conditions of the QT license, which can be
found below.
Source: http://qt.nokia.com/
e2fsprogs (1.41.14)
e2fsprogs provides the filesystem utilities for use with
the ext2 filesystem, it also supports the ext3 and ext4
filesystems.
73
This piece of software is made available under the
terms and conditions of the e2fsprogs license, which
can be found below.
Source: http://e2fsprogs.sourceforge.net/
alsa (1.0.24.1)
Advanced Linux Sound Architecture (ALSA).
This piece of software is made available under the
terms and conditions of the alsa license, which can be
found below.
Source: http://www.alsa-project.org
lvm2 (2.02.89)
DM_VERITY.
This piece of software is made available under the
terms and conditions of the lvm2 license, which can
be found below.
Source:
ftp://sources.redhat.com/pub/lvm2/releases/
encfs (1.3.2)
A library provides an encrypted filesystem in user-
space.
Source: http://www.arg0.net/encfs
boost (1.15.0)
A library provides free peer-reviewed portable C++
source libraries is used for encfs.
Source: http://www.boost.org
rlog (1.4)
A library that provides a flexible message logging
facility for C programs and libraries is used for encfs.
Source: http://www.arg0.net/rlog
iptables (1.4.15)
For Cross connection.
Source: http://www.netfilter.org/projects/iptables/
bash (3.2.48)
Bash is the shell, or command language interpreter,
that will appear in the GNU operating system.
Bash is an sh-compatible shell that incorporates
useful features from the Korn shell (ksh) and C shell
(csh).
It is intended to conform to the IEEE POSIX
P1003.2/ISO 9945.2 Shell and Tools standard.
It offers functional improvements over sh for both
programming and interactive use.
In addition, most sh scripts can be run by Bash
without modification.
Source: http://www.gnu.org/software/bash/
coreutils (6.9)
The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
These are the core utilities which are expected to
exist on every operating system.
Source: http://www.gnu.org/software/coreutils/
findutils (4.2.31)
The GNU Find Utilities are the basic directory
searching utilities of the GNU operating system.
These programs are typically used in conjunction with
other programs to provide modular and powerful
directory search and file locating capabilities to other
commands.
Source: http://www.gnu.org/software/findutils/
gawk (3.1.5)
If you are like many computer users, you would
frequently like to make changes in various text files
wherever certain patterns appear, or extract data from
parts of certain lines while discarding the rest.
To write a program to do this in a language such as C
or Pascal is a time-consuming inconvenience that
may take many lines of code.
The job is easy with awk, especially the GNU
implementation: gawk.
Source: http://www.gnu.org/software/gawk/
grep (2.5.1a)
The grep command searches one or more input files
for lines containing a match to a specified pattern. By
default, grep prints the matching lines.
Source: http://www.gnu.org/software/grep/
gzip (1.3.12)
GNU Gzip is a popular data compression program
originally written by Jean-loup Gailly for the GNU
project. Mark Adler wrote the decompression part.
Source: http://www.gnu.org/software/gzip/
inetutils (1.4.2)
Inetutils is a collection of common network
programs.
Source: http://www.gnu.org/software/inetutils/
iputils (s20101006)
The iputils package is set of small useful utilities for
Linux networking. It was originally maintained by
Alexey Kuznetsov.
Source: http://www.skbuff.net/iputils/
module-init-tools (3.12)
Provides developer documentation for the utilities
used by Linux systems to load and manage kernel
modules (commonly referred to as "drivers").
Source: https://modules.wiki.kernel.org/index.php/M
ain_Page
ncurses (5.7)
The Ncurses (new curses) library is a free software
emulation of curses in System V Release 4.0, and
more.
It uses Terminfo format, supports pads and color and
multiple highlights and forms characters and function-
key mapping, and has all the other SYSV-curses
enhancements over BSD Curses.
Source: http://www.gnu.org/software/ncurses/
74
net-tools (1.6)
The Net-tools?package is a collection of programs for
controlling the network subsystem of the Linux
kernel.
Source: http://www.linuxfromscratch.org/blfs/view/6.
3/basicnet/net-tools.html
procps (ps, top) (3.2.8)
procps is the package that has a bunch of small
useful utilities that give information about processes
using the /proc filesystem.
The package includes the programs ps, top, vmstat, w,
kill, free, slabtop, and skill.
Source: http://procps.sourceforge.net/index.html
psmisc (22.13)
This PSmisc package is a set of some small useful
utilities that use the proc filesystem. We're not about
changing the world, but providing the system
administrator with some help in common tasks.
Source: http://psmisc.sourceforge.net/
sed (4.1.5)
sed (stream editor) isn't an interactive text editor.
Instead, it is used to filter text, i.e., it takes text input,
performs some operation (or set of operations) on it,
and outputs the modified text.
sed is typically used for extracting part of a file using
pattern matching or substituting multiple occurrences
of a string within a file.
Source: http://www.gnu.org/software/sed/
tar (1.17)
GNU Tar provides the ability to create tar archives, as
well as various other kinds of manipulation.
For example, you can use Tar on previously created
archives to extract files, to store additional files, or to
update or list files which were already stored.
Source: http://www.gnu.org/software/tar/
util-linux-ng (2.18)
Various system utilities.
Source: http://userweb.kernel.org/~kzak/util-linux-
ng/
udhcpc (0.9.8cvs20050303-3)
Udhcpc is a very small?DHCP?client geared
towards?embedded systems.
Source: http://udhcp.sourcearchive.com/downloads/
0.9.8cvs20050303-3/
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a support
for the execution of NCL application. This library was
developed for the GNOME software suite and is
available under a "MIT" license.
Source: http://www.xmlsoft.org
uriparser (0.7.7)
For MPEG-DASH
Source: http://uriparser.sourceforge.net/
xerces-c++ (3.1.1)
For MPEG-DASH
Source: http://xerces.apache.org/
webp (0.2.1)
For Netflix
Source: https://code.google.com/p/webp/
wget (1.10.2)
GNU Wget is a free software package for retrieving
files using HTTP, HTTPS and FTP, the most widely-
used Internet protocols.
It is a non-interactive commandline tool, so it may
easily be called from scripts,?cron?jobs, terminals
without X-Windows support, etc.
Source:
http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
wireless_tools (0.29)
The Wireless Tools (WT)?is a set of tools allowing to
manipulate the Wireless Extensions.
They use a textual interface and are rather crude, but
aim to support the full Wireless Extension.
Source: http://www.hpl.hp.com/personal/Jean_Tourri
lhes/Linux/Tools.html
ezxml (0.8.6)
ezXML is a C library for parsing XML documents. Used
inside Philips libraries.
Source: http://sourceforge.net/projects/ezxml/
SQLite (3.7.7.1)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
Source: http://www.sqlite.org/download.html
AES (aes-src-29-04-09.zip)
Advanced Encryption Standard (AES) is a
specification for the encryption of electronic data.
Used inside Philips libraries.
Source: http://gladman.plushost.co.uk/oldsite/AES/
microhttpd (libmicrohttpd-0.9.9.tar.gz)
GNU libmicrohttpd is a small C library that is
supposed to make it easy to run an HTTP server as
part of another application.
The original download site for this software is :
http://www.gnu.org/software/libmicrohttpd/This
piece of software is made available under the terms
and conditions of the LGPL v2.1 license
Source: http://ftp.gnu.org/gnu/libmicrohttpd/libmicro
httpd-0.9.9.tar.gz
yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)
YAJL is a small event-driven (SAX-style) JSON parser
written in ANSI C, and a small validating JSON
generator. YAJL is released under the ISC license.
75
The original download site for this software is :
http://lloyd.github.com/yajl/This piece of software is
made available under the terms and conditions of the
ISC license
Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/
lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21
82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz
HMAC-SHA1 (0.1)
keyed-hash message authentication code (HMAC) is
a specific construction for calculating a message
authentication code (MAC) involving a cryptographic
hash function in combination with a secret
cryptographic key.
As with any MAC, it may be used to simultaneously
verify both the data integrity and the authentication
of a message.
Any cryptographic hash function, such as MD5 or
SHA-1, may be used in the calculation of an HMAC;
the resulting MAC algorithm is termed HMAC-MD5 or
HMAC-SHA1 accordingly.
Source:
http://www.deadhat.com/wlancrypto/hmac_sha1.c
gSoap (2.7.15)
The gSOAP toolkit is an open source C and C++
software development toolkit for SOAP/XML Web
services and generic (non-SOAP) C/C++ XML data
bindings.
Part of the software embedded in this product is
gSOAP software. Portions created by gSOAP are
Copyright 2000-2011 Robert A. van Engelen, Genivia
inc. All Rights Reserved.
Source: http://sourceforge.net/projects/gsoap2/
jquery (1.10.2)
jQuery is a fast and concise JavaScript Library that
simplifies HTML document traversing, event handling,
animating, and Ajax interactions for rapid web
development.
Source: http://jquery.com/
Libupnp (1.2.1)
The Linux* SDK for UPnP* Devices (libupnp) provides
developers with an API and open source code for
building control points, devices, and bridges that are
compliant with Version 1.0 of the UPnP Device
Architecture Specification.
Source: http://upnp.sourceforge.net/
mDNSResponder (mDNSResponder-320.10.80)
The mDNSResponder project is a component of
Bonjour,
Apple's ease-of-use IP networking
initiative:<http://developer.apple.com/bonjour/>
In our project, Bonjour is used for the automatic
discovery of devices and services
Source: http://developer.apple.com/bonjour/Acknow
ledgements and License Texts for any open source
software used in this Philips TV.
This is a document describing the distribution of the
source code used on the Philips TV, which fall either
under the GNU General Public License (the GPL), or
the GNU Lesser General Public License (the LGPL), or
any other open source license. Instructions to obtain
source code for this software can be found in the user
manual.
PHILIPS MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. Philips offers no support for this
software. The preceding does not affect your
warranties and statutory rights regarding any Philips
product(s) you purchased. It only applies to this
source code made available to you.
Freetype (2.4.3)
FreeType is a software font engine that is designed to
be small, efficient, highly customizable, and portable
while capable of producing high-quality output
(glyph images).
This piece of software is made available under the
terms and conditions of the FreeType Project license,
which can be found below.
Source: http://freetype.sourceforge.net
zlib (1.2.3)
The 'zlib' compression library provides in-memory
compression and decompression functions, including
integrity checks of the uncompressed data.
This piece of software is made available under the
terms and conditions of the zlib license, which can be
found below.
Source: http://www.zlib.net/
Fraunhofer AAC Ecnoder (3.3.3)
AAC Ecnoder.
Source: Android JB source code
unicode (3.2)
This library is used to perform UNICODE string
manipulation.
This piece of software is made available under the
terms and conditions of the ICU license, which can be
found below.
Source: http://www.icu-project.org/
libpng (1.2.43)
PNG decoder.
This piece of software is made available under the
terms and conditions of the libpng license, which can
be found below.
Source: http://www.libpng.org/pub/png/libpng.html
libjpg (6b)
This library is used to perform JPEG decoding tasks.
76
This piece of software is made available under the
terms and conditions of the libjpg license, which can
be found below.
Source: http://www.ijg.org/
libmng (1.0.10)
libmng -THE reference library for reading, displaying,
writing and examining Multiple-Image Network
Graphics.MNG is the animation extension to the
popular PNG image-format.
This piece of software is made available under the
terms and conditions of the libmng license, which can
be found below.
Source:
http://sourceforge.net/projects/libmng/files/
u-Boot loader (1.3.4)
Used by boot loader and only linked with boot
loader, GPL license.
This piece of software is made available under the
terms and conditions of the u-Boot loader license,
which can be found below.
Source: http://sourceforge.net/projects/u-boot/files/
u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download
Libcurl (7.21.7)
HTTP client;libcurl is a free and easy-to-use client-
side URL transfer library, supporting FTP, FTPS, HTTP,
HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,
LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl
supports SSL certificates, HTTP POST, HTTP PUT, FTP
uploading, HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM,
Negotiate, Kerberos4), file transfer resume, http proxy
tunneling and more!
This piece of software is made available under the
terms and conditions of the Libcurl license, which can
be found below.
Source: http://curl.haxx.se/
c-ares (1.7.4)
c-ares is a C library that performs DNS requests and
name resolves asynchronously.
This piece of software is made available under the
terms and conditions of the c-ares license, which can
be found below.
Source: http://c-ares.haxx.se/c-ares-1.7.1.tar.gz
openssl (1.0.0d)
OpenSSL is an open source implementation of the
SSL and TLS protocols. The core library (written in the
C programming language) implements the basic
cryptographic functions and provides various utility
functions. Wrappers allowing the use of the OpenSSL
library in a variety of computer languages are
available.
This piece of software is made available under the
terms and conditions of the 1.7.4 license, which can be
found below.
Source:
http://www.openssl.org/source/openssl-1.0.0.tar.gz
Expat (2.01)
xml paser; Expat is an XML parser library written in C.
It is a stream-oriented parser in which an application
registers handlers for things the parser might find in
the XML document (like start tags). An introductory
article on using.
This piece of software is made available under the
terms and conditions of the Expat license, which can
be found below.
Source: http://expat.sourceforge.net/
DirectFB include SAWMAN (1.4.0)
It is a software library for GNU/Linux/UNIX based
operating system with a small memory footprint that
provides graphics acceleration, input device handling
and abstraction layer, and integrated windowing
system with support for translucent windows and
multiple display layers on top of the Linux
framebuffer without requiring any kernel
modifications.
This piece of software is made available under the
terms and conditions of the DirectFB license, which
can be found below.
Source: http://sourceforge.net/projects/jointspace/fil
es/remote_applications_SDK/remote_spplications_S
DK_v1.3.1/DirectFB141_source_1.3.1.7z/download
SAWMAN
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
Source: http://squashfs.sourceforge.net/
Linux Kernel (3.0)
The Linux kernel is an operating system kernel used
by the Linux family of Unix-like operating systems.
This piece of software is made available under the
terms and conditions of the Linux Kernel license,
which can be found below.
Source: http://www.kernel.org
SQLite (3.7.2)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
This piece of software is made available under the
terms and conditions of the SQLite license, which can
be found below.
Source: http://www.sqlite.org/download.html
SquashFS (3.4)
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
77
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the
terms and conditions of the SquashFS license, which
can be found below.
Source: http://squashfs.sourceforge.net/
glibc (2.6.1)
Any Unix-like operating system needs a C library: the
library which defines the ``system calls'' and other
basic facilities such as open, malloc, printf, exit...The
GNU C library is used as the C library in the GNU
system and most systems with the Linux kernel
This piece of software is made available under the
terms and conditions of the glibc license, which can
be found below.
Source: http://www.gnu.org/software/libc/
mtd-utils (1)
The aim of the system is to make it simple to provide
a driver for new hardware, by providing a generic
interface between the hardware drivers and the upper
layers of the system. Hardware drivers need to know
nothing about the storage formats used, such as FTL,
FFS2, etc., but will only need to provide simple
routines for read, write and erase. Presentation of the
device's contents to the user in an appropriate form
will be handled by the upper layers of the system.
This piece of software is made available under the
terms and conditions of the mtd-utils license, which
can be found below.
Source: http://www.linux-
mtd.infradead.org/index.html
libusb (1.0.6)
This is the home of libusb, a library that gives user
level applications uniform access to USB devices
across many different operating systems. libusb is an
open source project licensed under the GNU Lesser
General Public License version 2.1.Many participants
in the libusb community have helped and continue to
help with ideas, implementation, support and
improvements for libusb.
This piece of software is made available under the
terms and conditions of the libusb license, which can
be found below.
Source:
http://libusb.wiki.sourceforge.net
http://www.libusb.org/
libusb-compat (0.1.3)
Library to enable user space application programs to
communicate with USB devices.
This piece of software is made available under the
terms and conditions of the libusb-compat license,
which can be found below.
Source:
http://libusb.wiki.sourceforge.net/LibusbCompat0.1
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform
implementation of the Microsoft Windows NTFS file
system with read-write support. NTFS-3G often uses
the FUSE file system interface, so it can run
unmodified on many different operating systems. It is
runnable on Linux, FreeBSD, NetBSD, OpenSolaris,
BeOS, QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed under
either the GNU General Public License or a
proprietary license. It is a partial fork of ntfsprogs and
is under active maintenance and development.
This piece of software is made available under the
terms and conditions of the NTFS-3G Read/Write
Driver license, which can be found below.
Source: http://www.tuxera.com
WPA Supplicant (0.5.10 & 0.6.7)
These packages are used to provide WiFi access.The
supplier for these tools is Atheros.These pieces of
software are made available under the terms and
conditions of the GPL v2 license, which can be found
below.
This piece of software is made available under the
terms and conditions of the WPA Supplicant license,
which can be found below.
Source: http://hostap.epitest.fi/wpa_supplicant/
ntfsprogs (2.0.0)
Some useful tool for ntfs file sytem.
This piece of software is made available under the
terms and conditions of the ntfsprogs license, which
can be found below.
Source: http://sourceforge.net/projects/linux-ntfs
fuse (2.8.4)
Fuse is a simple interface for userspace programs to
export a virtual filesystem to the linux kernel.
This piece of software is made available under the
terms and conditions of the fuse license, which can
be found below.
Source: http://fuse.sourceforge.net/
libiconv (1.11.1)
This library provides an iconv() implementation, for
use on systems which don't have one, or whose
implementation cannot convert from/to Unicode. .
This piece of software is made available under the
terms and conditions of the libiconv license, which
can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
electric-fence (2.1.13)
Used for memory corruption detection.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: http://perens.com/FreeSoftware/ElectricFenc
e/electric-fence_2.1.13-0.1.tar.gz
liveMedia
78
When Wifi Display or streaming RtspPlayer are
enabled.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: www.live555.com
QT (4.7.0)
Netflix skpe besttv pandora picasa? will use QT.
This piece of software is made available under the
terms and conditions of the QT license, which can be
found below.
Source: http://qt.nokia.com/
e2fsprogs (1.41.14)
e2fsprogs provides the filesystem utilities for use with
the ext2 filesystem, it also supports the ext3 and ext4
filesystems.
This piece of software is made available under the
terms and conditions of the e2fsprogs license, which
can be found below.
Source: http://e2fsprogs.sourceforge.net/
alsa (1.0.24.1)
Advanced Linux Sound Architecture (ALSA).
This piece of software is made available under the
terms and conditions of the alsa license, which can be
found below.
Source: http://www.alsa-project.org
lvm2 (2.02.89)
DM_VERITY.
This piece of software is made available under the
terms and conditions of the lvm2 license, which can
be found below.
Source:
ftp://sources.redhat.com/pub/lvm2/releases/
encfs (1.3.2)
A library provides an encrypted filesystem in user-
space.
Source: http://www.arg0.net/encfs
boost (1.15.0)
A library provides free peer-reviewed portable C++
source libraries is used for encfs.
Source: http://www.boost.org
rlog (1.4)
A library that provides a flexible message logging
facility for C programs and libraries is used for encfs.
Source: http://www.arg0.net/rlog
iptables (1.4.15)
For Cross connection.
Source: http://www.netfilter.org/projects/iptables/
bash (3.2.48)
Bash is the shell, or command language interpreter,
that will appear in the GNU operating system.
Bash is an sh-compatible shell that incorporates
useful features from the Korn shell (ksh) and C shell
(csh).
It is intended to conform to the IEEE POSIX
P1003.2/ISO 9945.2 Shell and Tools standard.
It offers functional improvements over sh for both
programming and interactive use.
In addition, most sh scripts can be run by Bash
without modification.
Source: http://www.gnu.org/software/bash/
coreutils (6.9)
The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
These are the core utilities which are expected to
exist on every operating system.
Source: http://www.gnu.org/software/coreutils/
findutils (4.2.31)
The GNU Find Utilities are the basic directory
searching utilities of the GNU operating system.
These programs are typically used in conjunction with
other programs to provide modular and powerful
directory search and file locating capabilities to other
commands.
Source: http://www.gnu.org/software/findutils/
gawk (3.1.5)
If you are like many computer users, you would
frequently like to make changes in various text files
wherever certain patterns appear, or extract data from
parts of certain lines while discarding the rest.
To write a program to do this in a language such as C
or Pascal is a time-consuming inconvenience that
may take many lines of code.
The job is easy with awk, especially the GNU
implementation: gawk.
Source: http://www.gnu.org/software/gawk/
grep (2.5.1a)
The grep command searches one or more input files
for lines containing a match to a specified pattern. By
default, grep prints the matching lines.
Source: http://www.gnu.org/software/grep/
gzip (1.3.12)
GNU Gzip is a popular data compression program
originally written by Jean-loup Gailly for the GNU
project. Mark Adler wrote the decompression part.
Source: http://www.gnu.org/software/gzip/
inetutils (1.4.2)
Inetutils is a collection of common network
programs.
Source: http://www.gnu.org/software/inetutils/
iputils (s20101006)
The iputils package is set of small useful utilities for
Linux networking. It was originally maintained by
Alexey Kuznetsov.
79
Source: http://www.skbuff.net/iputils/
module-init-tools (3.12)
Provides developer documentation for the utilities
used by Linux systems to load and manage kernel
modules (commonly referred to as "drivers").
Source: https://modules.wiki.kernel.org/index.php/M
ain_Page
ncurses (5.7)
The Ncurses (new curses) library is a free software
emulation of curses in System V Release 4.0, and
more.
It uses Terminfo format, supports pads and color and
multiple highlights and forms characters and function-
key mapping, and has all the other SYSV-curses
enhancements over BSD Curses.
Source: http://www.gnu.org/software/ncurses/
net-tools (1.6)
The Net-tools?package is a collection of programs for
controlling the network subsystem of the Linux
kernel.
Source: http://www.linuxfromscratch.org/blfs/view/6.
3/basicnet/net-tools.html
procps (ps, top) (3.2.8)
procps is the package that has a bunch of small
useful utilities that give information about processes
using the /proc filesystem.
The package includes the programs ps, top, vmstat, w,
kill, free, slabtop, and skill.
Source: http://procps.sourceforge.net/index.html
psmisc (22.13)
This PSmisc package is a set of some small useful
utilities that use the proc filesystem. We're not about
changing the world, but providing the system
administrator with some help in common tasks.
Source: http://psmisc.sourceforge.net/
sed (4.1.5)
sed (stream editor) isn't an interactive text editor.
Instead, it is used to filter text, i.e., it takes text input,
performs some operation (or set of operations) on it,
and outputs the modified text.
sed is typically used for extracting part of a file using
pattern matching or substituting multiple occurrences
of a string within a file.
Source: http://www.gnu.org/software/sed/
tar (1.17)
GNU Tar provides the ability to create tar archives, as
well as various other kinds of manipulation.
For example, you can use Tar on previously created
archives to extract files, to store additional files, or to
update or list files which were already stored.
Source: http://www.gnu.org/software/tar/
util-linux-ng (2.18)
Various system utilities.
Source: http://userweb.kernel.org/~kzak/util-linux-
ng/
udhcpc (0.9.8cvs20050303-3)
Udhcpc is a very small?DHCP?client geared
towards?embedded systems.
Source: http://udhcp.sourcearchive.com/downloads/
0.9.8cvs20050303-3/
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a support
for the execution of NCL application. This library was
developed for the GNOME software suite and is
available under a "MIT" license.
Source: http://www.xmlsoft.org
uriparser (0.7.7)
For MPEG-DASH
Source: http://uriparser.sourceforge.net/
xerces-c++ (3.1.1)
For MPEG-DASH
Source: http://xerces.apache.org/
webp (0.2.1)
For Netflix
Source: https://code.google.com/p/webp/
wget (1.10.2)
GNU Wget is a free software package for retrieving
files using HTTP, HTTPS and FTP, the most widely-
used Internet protocols.
It is a non-interactive commandline tool, so it may
easily be called from scripts,?cron?jobs, terminals
without X-Windows support, etc.
Source:
http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
wireless_tools (0.29)
The Wireless Tools (WT)?is a set of tools allowing to
manipulate the Wireless Extensions.
They use a textual interface and are rather crude, but
aim to support the full Wireless Extension.
Source: http://www.hpl.hp.com/personal/Jean_Tourri
lhes/Linux/Tools.html
ezxml (0.8.6)
ezXML is a C library for parsing XML documents. Used
inside Philips libraries.
Source: http://sourceforge.net/projects/ezxml/
SQLite (3.7.7.1)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
Source: http://www.sqlite.org/download.html
AES (aes-src-29-04-09.zip)
Advanced Encryption Standard (AES) is a
80
specification for the encryption of electronic data.
Used inside Philips libraries.
Source: http://gladman.plushost.co.uk/oldsite/AES/
microhttpd (libmicrohttpd-0.9.9.tar.gz)
GNU libmicrohttpd is a small C library that is
supposed to make it easy to run an HTTP server as
part of another application.
The original download site for this software is :
http://www.gnu.org/software/libmicrohttpd/This
piece of software is made available under the terms
and conditions of the LGPL v2.1 license
Source: http://ftp.gnu.org/gnu/libmicrohttpd/libmicro
httpd-0.9.9.tar.gz
yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)
YAJL is a small event-driven (SAX-style) JSON parser
written in ANSI C, and a small validating JSON
generator. YAJL is released under the ISC license.
The original download site for this software is :
http://lloyd.github.com/yajl/This piece of software is
made available under the terms and conditions of the
ISC license
Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/
lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21
82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz
HMAC-SHA1 (0.1)
keyed-hash message authentication code (HMAC) is
a specific construction for calculating a message
authentication code (MAC) involving a cryptographic
hash function in combination with a secret
cryptographic key.
As with any MAC, it may be used to simultaneously
verify both the data integrity and the authentication
of a message.
Any cryptographic hash function, such as MD5 or
SHA-1, may be used in the calculation of an HMAC;
the resulting MAC algorithm is termed HMAC-MD5 or
HMAC-SHA1 accordingly.
Source:
http://www.deadhat.com/wlancrypto/hmac_sha1.c
gSoap (2.7.15)
The gSOAP toolkit is an open source C and C++
software development toolkit for SOAP/XML Web
services and generic (non-SOAP) C/C++ XML data
bindings.
Part of the software embedded in this product is
gSOAP software. Portions created by gSOAP are
Copyright 2000-2011 Robert A. van Engelen, Genivia
inc. All Rights Reserved.
Source: http://sourceforge.net/projects/gsoap2/
jquery (1.10.2)
jQuery is a fast and concise JavaScript Library that
simplifies HTML document traversing, event handling,
animating, and Ajax interactions for rapid web
development.
Source: http://jquery.com/
Libupnp (1.2.1)
The Linux* SDK for UPnP* Devices (libupnp) provides
developers with an API and open source code for
building control points, devices, and bridges that are
compliant with Version 1.0 of the UPnP Device
Architecture Specification.
Source: http://upnp.sourceforge.net/
mDNSResponder (mDNSResponder-320.10.80)
The mDNSResponder project is a component of
Bonjour,
Apple's ease-of-use IP networking
initiative:<http://developer.apple.com/bonjour/>
In our project, Bonjour is used for the automatic
discovery of devices and services
Source: http://developer.apple.com/bonjour/
81
22
Specifications
22.1
Environmental
European Energy Label
The European Energy Label informs you on the
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the
lower the energy it consumes.
On the label, you can find the energy efficiency class,
the average power consumption of this product in use
and the average energy consumption for 1 year. You
can also find the power consumption values for this
product on the Philips website for your country
at www.philips.com/TV
Product Fiche
43PUx6101
• Energy Efficiency Class : A+
• Visible Screen Size : 108 cm / 43 inch
• On Mode Power Consumption (W) : 47 W
• Annual Energy Consumption (kWh) * : 68 kWh
• Standby Power Consumption (W) **: 0.30 W
• Off Mode Power Consumption (W) : Not applicable
• Display Resolution (Pixels) : 3840 x 2160p
49PUx6101
• Energy Efficiency Class : A+
• Visible Screen Size : 123 cm / 49 inch
• On Mode Power Consumption (W) : 66 W
• Annual Energy Consumption (kWh) * : 96 kWh
• Standby Power Consumption (W) **: 0.30 W
• Off Mode Power Consumption (W) : Not applicable
• Display Resolution (Pixels) : 3840 x 2160p
55PUx6101
• Energy Efficiency Class : A+
• Visible Screen Size : 139 cm / 55 inch
• On Mode Power Consumption (W) : 62 W
• Annual Energy Consumption (kWh) * : 91 kWh
• Standby Power Consumption (W) **: 0.30 W
• Off Mode Power Consumption (W) : Not applicable
• Display Resolution (Pixels) : 3840 x 2160p
* Energy consumption kWh per year, based on the
power consumption of the television operating 4
hours per day for 365 days. The actual energy
consumption depends on how the television is used.
** When the TV is turned off with the remote control
and no function is active.
End of use
Disposal of your old product and batteries
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2012/19/EU.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. Correct disposal of your old
product helps to prevent potential negative
consequences for the environment and human
health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
for the environment and human health.
22.2
Power
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Power
• Mains power : AC 220-240V +/-10%
• Ambient temperature : 5°C to 35°C
• Power saving features : Eco mode, Picture mute (for
radio), Auto switch-off timer, Eco settings menu.
For power consumption information, see
chapter Product Fiche.
The power rating stated on the product typeplate is
82
the power consumption for this product during
normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
used for electrical safety (IEC 60065 Ed. 7.2).
22.3
Reception
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband, S-Channel, UHF, VHF
• DVB : DVB-T (terrestrial, antenna) COFDM 2K/8K,
DVB-C (cable) QAM
• Analogue video playback : SECAM, PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC
13818-2), MPEG4 SD/HD (ISO/IEC 14496-10)
• Digital audio playback (ISO/IEC 13818-3)
22.4
Display type
Diagonal screen size
• 43PUx6101 : 108 cm / 43 inch
• 49PUx6101 : 123 cm / 49 inch
• 55PUx6101 : 139 cm / 55 inch
Display resolution
• 3840 x 2160p
22.5
Display input resolution
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz
• 2160p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz
Computer formats
Resolutions (amongst others)
• 640 x 480p - 60 Hz
• 800 x 600p - 60 Hz
• 1024 x 768p - 60 Hz
• 1280 x 768p - 60 Hz
• 1360 x 765p - 60 Hz
• 1360 x 768p - 60 Hz
• 1280 x 1024p - 60 Hz
• 1920 x 1080p - 60 Hz
• 3840 x 2160p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz
22.6
Dimensions and Weights
43PUx6101
• without TV stand:
Width 968.2 mm - Height 575.7 mm - Depth 81.8 mm
- Weight ± 9.25 kg
• with TV stand:
Width 968.2 mm - Height 623.3 mm - Depth 201.8
mm - Weight ± 9.73 kg
49PUx6101
• without TV stand:
Width 1099.2 mm - Height 631.9 mm - Depth 86.7
mm - Weight ± 11.03 kg
• with TV stand:
Width 1099.2 mm - Height 699.7 mm - Depth 210.5
mm - Weight ± 11.85 kg
55PUx6101
• without TV stand:
Width 1239.2 mm - Height 724.7 mm - Depth 87.9 mm
- Weight ± 15.5 kg
• with TV stand:
Width 1239.2 mm - Height 779.4 mm - Depth 228.8
mm - Weight ± 16 kg
22.7
Connectivity
TV Side
• HDMI 3 in
• HDMI 4 in - MHL
• USB 2
• USB 3
• 1x Common Interface slot: CI+/CAM
• Headphones - Stereo mini-jack 3.5mm
TV Rear
• Audio In (DVI to HDMI) - Stereo mini-jack 3.5mm
• SCART: Audio L/R, CVBS in, RGB
• CVBS/Y Pb Pr : CVBS/Y Pb Pr, Audio L/R
TV Bottom
• HDMI 1 in - ARC
• HDMI 2 in
• USB 1
• Audio out - Optical Toslink
• Network LAN - RJ45
• Antenna (75 ohm)
22.8
Sound
• HD Stereo
• Output power (RMS) : 16W
• Dolby® Digital Plus
• DTS 2.0+ Digital out ™
83
22.9
Multimedia
Connections
• USB 2.0 / USB 3.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11b/g/n (built-in)
Supported USB file systems
• FAT 16, FAT 32, NTFS
Playback formats
• Containers : 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS,
MPEG-4, Matroska (MKV), Quicktime (MOV, M4V,
M4A), Windows Media (ASF/WMV/WMA)
• Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2,
MPEG-4 Part 10 AVC (H.264), VC-1, WMV9
• Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB,
Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital
Out™, MPEG-1/2/2.5 Layer I/II/III (includes MP3),
WMA (v2 to v9.2), WMA Pro (v9/v10)
• Subtitles :
– Formats : SAMI, SubRip (SRT), SubViewer (SUB),
MicroDVD (TXT), mplayer2 (TXT), TMPlayer (TXT)
– Character encodings : UTF-8, Central Europe and
Eastern Europe (Windows-1250), Cyrillic
(Windows-1251), Greek (Windows-1253), Turkish
(Windows-1254), Western Europe (Windows-1252)
• Image Codecs : JPEG
• Limitations :
– Maximum supported total bit rate for a media file is
30Mbps.
– Maximum supported video bit rate for a media file
is 20Mbps.
– MPEG-4 AVC (H.264) is supported up to High
Profile @ L4.1.
– VC-1 is supported up to Advanced Profile @ L3.
Wi-Fi Certified
This TV supports Miracast certified devices.
Supported media server software (DMS)
• You can use any DLNA V1.5 certified media server
software (DMS class).
• You can use the Philips TV Remote app (iOS and
Android) on mobile devices.
Performance may vary, depending on the capabilities
of the mobile device and the software used.
ESD regulations
This apparatus meets performance criteria A for ESD.
In case the apparatus does not recover in file sharing
mode due to electrostatic discharge, user interference
is required.
84
23
Help and support
23.1
Register your TV
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
Go to www.philips.com/welcome
23.2
Using help
Open Help
Press the key (blue) to open Help immediately.
Help will open on the chapter that is most relevant to
what you are doing or what is selected on TV. To look
up topics alphabetically, press the colour
key Keywords .
To read the Help as a book, select Book.
Before you execute the Help instructions, close Help.
To close Help, press the colour key Close .
For some activities, like Text (Teletext), the colour
keys have specific functions and cannot open Help.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant
Help page from your computer.
To download the Help (user manual) go
to www.philips.com/support
23.3
Troubleshooting
Switch on and remote control
The TV does not switch on
• Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
• Make sure that the power cable is securely
connected.
Creaking sound at startup or switch off
When you are turning the TV on, off or to standby,
you hear a creaking sound from the TV chassis. The
creaking sound is due to the normal expansion and
contraction of the TV as it cools and warms up. This
does not affect performance.
TV does not respond to the remote control
The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behaviour.
If the TV continues to be unresponsive to the remote
control, you can check if the remote control is working
by means of a mobile phone camera. Put the phone
in camera mode and point the remote control to the
camera lens. If you press any key on the remote
control and you notice the infra red LED flicker
through the camera, the remote control is working.
The TV needs to be checked.
If you do not notice the flickering, the remote control
might be broken or its batteries are low.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
The TV goes back to standby after showing the
Philips startup screen
When the TV is in standby, a Philips startup screen is
displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
and reconnected to the power supply, the startup
screen is displayed at the next startup. To switch on
the TV from standby, press on the remote control or
the TV.
The standby light keeps on blinking
Disconnect the power cable from the power outlet.
Wait 5 minutes before you reconnect the power
cable. If the blinking reoccurs, contact Philips TV
Consumer Care.
Channels
No digital channels found during the installation
See the technical specifications to make sure that
your TV supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected and
that the correct network is selected.
Previously installed channels are not in the channel
list
Make sure that the correct channel list is selected.
85
Picture
No picture / distorted picture
• Make sure that the antenna is properly connected to
the TV.
• Make sure that the correct device is selected as the
display source.
• Make sure that the external device or source is
properly connected.
Sound but no picture
• Make sure that the picture settings are set correctly.
Poor antenna reception
• Make sure that the antenna is properly connected to
the TV.
• Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality. If possible, try to improve
the reception quality by changing the antenna
direction or moving devices away from the TV.
• If reception on only one channel is poor, fine-tune
this channel with Manual Installation.
Poor picture from a device
• Make sure that the device is connected properly.
• Make sure that the picture settings are set correctly.
Picture settings change after a while
Make sure that Location is set to Home . You can
change and save settings in this mode.
A commercial banner appears
Make sure that Location is set to Home.
Picture does not fit the screen
Change to a different picture format.
Picture format keeps changing with different
channels
Select a non 'Auto' picture format.
Picture position is incorrect
Picture signals from some devices may not fit the
screen correctly. Check the signal output of the
connected device.
Computer picture is not stable
Make sure that your PC uses the supported resolution
and refresh rate.
Sound
No sound or poor sound quality
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
• Make sure that the sound settings are correctly set.
• Make sure that all cables are properly connected.
• Make sure that the volume is not muted or set to
zero.
• Make sure that the TV audio output is connected to
the audio input on the Home Theatre System.
Sound should be heard from the HTS speakers.
• Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
HDMI and USB
HDMI
• Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
• If the TV does not recognise the HDMI device and
no picture is displayed, switch the source from one
device to another and back again.
• If the picture and sound of a device connected with
HDMI is distorted, check if a different HDMI Ultra
HD setting can solve this problem. In Help, press the
colour key Keywords and look up HDMI Ultra
HD.
• If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
• If you use an HDMI-to-DVI adapter or HDMI-to-DVI
cable, make sure that an additional audio cable is
connected to AUDIO IN (mini-jack only), if available.
HDMI EasyLink does not work
• Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
No volume icon shown
• When an HDMI-CEC audio device is connected and
you use the TV Remote Control to adjust the volume
level from the device, this behaviour is normal.
Photos, videos and music from a USB device do not
show
• Make sure that the USB storage device is set to Mass
Storage Class compliant, as described in the storage
device's documentation.
• Make sure that the USB storage device is compatible
with the TV.
• Make sure that the audio and picture file formats are
supported by the TV.
Choppy playback of USB files
• The transfer performance of the USB storage device
may limit the data transfer rate to the TV which
causes poor playback.
86
Wi-Fi and Internet
Wi-Fi network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
DHCP
• If the connection fails, you can check the DHCP
(Dynamic Host Configuration Protocol) setting of the
router. DHCP should be switched on.
Wrong menu language
Wrong menu language
Change the language back to your language.
To change the language of the TV menus and
messages…
1 - Press , select General
settings > Language > Menu Language and
press OK.
2 - Select on the language you need.
3 - Press (left) repeatedly if necessary, to close
the menu.
23.4
Online help
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support .
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
23.5
Consumer care / Repair
For support and repair, call the Consumer Care
hotline in your country. Find the telephone number in
the printed documentation that came with the TV.
Or consult our website www.philips.com/support .
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irrepairable damage to your TV
or void your warranty.
87
24
Safety and care
24.1
Safety
Important
Read and understand all safety instructions before
you use the TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Secure the TV from falling over
Always use the supplied wall bracket to secure the TV
from falling over. Mount the bracket and secure the
TV onto the bracket, even if you put the TV on the
floor.
You can find the mounting instructions in the Quick
Start Guide that came with the TV. In case you lost
this guide, you can download the guide
from www.philips.com
Use the product type number of the TV to look for the
Quick Start Guide to download.
Risk of electric shock or fire
• Never expose the TV to rain or water. Never place
liquid containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips TV Consumer Care to have the TV
checked before use.
• Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning
candles, naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation slots or other
openings on the TV.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
exerted on the power cord when you swivel the TV
screen.
• To disconnect the TV from the mains power, the
power plug of the TV must be disconnected. When
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
Risk of injury or damage to the TV
• Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
• When wall mounted, ensure that the wall mount can
safely bear the weight of the TV set. TP Vision bears
no responsibility for improper wall mounting that
results in accident, injury or damage.
• Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Risk of damage to the TV !
Before you connect the TV to the power outlet,
ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
to the power outlet if the voltage is different.
Risk of injury to children
Follow these precautions to prevent the TV from
toppling over and causing injury to children:
• Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of
the mounting surface.
• Never place the TV on tall furniture, such as a
bookcase, without anchoring both the furniture and
TV to the wall or a suitable support.
• Teach children about the dangers of climbing on
furniture to reach the TV.
Risk of swallowing batteries !
The remote control may contain coin-type batteries
which can easily be swallowed by small children.
Keep these batteries out of reach of children at all
times.
Risk of overheating
Never install the TV in a confined space. Always leave
a space of at least 10 cm or 4 inches around the TV
for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
88
Lightning storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or
41°F, unpack the TV and wait until the TV temperature
reaches room temperature before connecting the TV
to the power outlet.
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
24.2
Screen care
• Never touch, push, rub or strike the screen with any
object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
• To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
• Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
89
25
Terms of use
2016 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter referred
to as TP Vision, which is the manufacturer of the
product. TP Vision is the warrantor in relation to the
TV with which this booklet was packaged. Philips and
the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V
or their respective owners. TP Vision reserves the right
to change products at any time without being obliged
to adjust earlier supplies accordingly.
The written material packaged with the TV and the
manual stored in the memory of the TV or
downloaded from the Philips
website www.philips.com/support are believed to
be adequate for the intended use of the system.
The material in this manual is believed adequate for
the intended use of the system. If the product, or its
individual modules or procedures, are used for
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision warrants that the material itself
does not infringe any United States patents. No
further warranty is expressed or implied. TP Vision
cannot be held responsible neither for any errors in
the content of this document nor for any problems as
a result of the content in this document. Errors
reported to Philips will be adapted and published on
the Philips support website as soon as possible.
Terms of warranty - Risk of injury, damage to TV or
void of warranty!
Never attempt to repair the TV yourself. Use the TV
and accessories only as intended by the
manufacturer. The caution sign printed on the back of
the TV indicates risk of electric shock. Never remove
the TV cover. Always contact Philips TV Customer
Care for service or repairs. Find the telephone number
in the printed documentation that came with the
TV. Or consult our
website www.philips.com/support and select your
country if needed. Any operation expressly prohibited
in this manual, or any adjustments and assembly
procedures not recommended or authorised in this
manual, shall void the warranty.
Pixel characteristics
This LCD/LED product has a high number of colour
pixels. Although it has effective pixels of 99.999% or
more, black dots or bright points of light (red, green or
blue) may appear constantly on the screen. This is a
structural property of the display (within common
industry standards) and is not a malfunction.
CE compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/EC
(EMC) and 2011/65/EU (ROHS).
Compliance with EMF
TP Vision manufactures and sells many products
targeted at consumers which, like any electronic
apparatus, in general have the ability to emit and
receive electromagnetic signals. One of TP Vision’s
leading business principles is to take all necessary
health and safety measures for our products, to
comply with all applicable legal requirements and to
stay well within the Electro Magnetic Field (EMF)
standards applicable at the time of producing the
products.
TP Vision is committed to developing, producing and
marketing products that cause no adverse health
effects. TP Vision confirms that, as long as its products
are handled properly for their intended use, they are
safe to use according to scientific evidence available
today. TP Vision plays an active role in the
development of international EMF and safety
standards, enabling TP Vision to anticipate further
developments in standardisation for early integration
in its products.
90
26
Copyrights
26.1
MHL
MHL, Mobile High-Definition Link and the MHL Logo
are trademarks or registered trademarks of the MHL,
LLC.
26.2
Ultra HD
The DIGITALEUROPE UHD Display Logo is a
trademark of DIGITALEUROPE.
26.3
HDMI
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
26.4
Dolby Digital Plus
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
26.5
DTS 2.0 + Digital Out ™
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 and other U.S. and
worldwide patents issued and pending. DTS, the
Symbol, and DTS and the Symbol together are
registered trademarks and DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software. ©
DTS, Inc. All Rights Reserved.
26.6
DTVi
The DTVi brand and logo are registered marks of
Pontifical Catholic University of Rio de Janeiro (PUC-
Rio) and the Federal University of Paraíba (UFPB).
26.7
Java
Java and all Java based trademarks are registered
trademarks of Oracle and/or its affiliates, in the United
States and other countries.
26.8
Microsoft
Windows Media
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
Microsoft PlayReady
Content owners use Microsoft PlayReady™ content
access technology to protect their intellectual
property, including copyrighted content.
91
This device uses PlayReady technology to access
PlayReady-protected content and/or WMDRM-
protected content. If the device fails to properly
enforce restrictions on content usage, content owners
may require Microsoft to revoke the device's ability to
consume PlayReady-protected content. Revocation
should not affect unprotected content or content
protected by other content access technologies.
Content owners may require you to upgrade
PlayReady to access their content. If you decline an
upgrade, you will not be able to access content that
requires the upgrade.
26.9
Wi-Fi Alliance
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance.
26.10
Kensington
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with issued
registrations and pending applications in other
countries throughout the world.
26.11
MHEG software
The copyright in MHEG software ("the Software")
comprised in this television ("this product") and
included to enable you to use interactive television
features is owned by S&T CLIENT SYSTEMS LIMITED
("the Owner"). You are permitted to use the Software
only in conjunction with this product.
26.12
Other trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
92
Index
A
Age Rating 28
Antenna connection 7
Antenna, Manual Installation 68
App gallery 47
Audio commentary 63
Audio Description 63
Audio Language 29
Audio Language, Primary 29
Audio Language, Secondary 29
Audio Out - Optical, tips 15
Audio Out Delay 17
Audio Out Format 18
Audio Out Levelling 18
Audio Out Offset 18
Audio Out Settings 17
Audio to Video Sync 17
Auto Volume Levelling 55
Automatic Channel Update 66
Automatic switch off 24
B
Backlight Contrast 52
Bass 55
Blu-ray Disc player, connect 18
C
Cable, Manual Installation 68
CAM PIN 16
CAM, Conditional Access Module 15
Camcorder, connect 22
Channel 27
Channel List 27
Channel List Copy 68
Channel List Copy, copy 68
Channel List Copy, upload 69
Channel List, about 27
Channel List, filter 27
Channel List, open 27
Channel logos 59
Channel Update Message 66
Channel, age rating 28
Channel, Antenna installation 66
Channel, Automatic Channel Update 66
Channel, Cable Installation 66
Channel, Manual channel update 66
Channel, Options 28
Channel, Reinstall 66
Channel, switch to a channel 28
Channel, TV guide 33
Child Lock 60
CI+ 15
Clear Internet Memory 10
Clear Miracast connection 10
Clear Sound 56
Clock settings 62
Colour 52
Colour, Colour enhancement 52
Colour, colour temperature 52
Colour, custom colour temperature 53
Common Interface Slot 15
Computer, connect 22
Connect, USB Flash Drive 22
Connectivity Guide 12
Consumer Care 87
Contact Philips 87
Contrast 52
Contrast, Contrast Mode 53
Contrast, Dynamic Contrast 53
Contrast, Gamma 53
Contrast, Video Contrast 53
D
Digital Text 30
Disposal of TV or batteries 82
DMR, Digital Media Renderer 9
DVB (Digital Video Broadcast) 66
DVD player 19
E
EasyLink 13
EasyLink, On or Off 13
EasyLink, Remote control 13
EasyLink, settings 14
Eco settings 57
End of use 82
European Ecolabel 82
F
Frequency Scan 67
Frequency Step Size 67
G
Game Console, connect 19
Game or Computer 40
Game or Computer, setting 52
Gamma 53
H
Hard of hearing 63
HbbTV 31
HDMI MHL 12
HDMI Ultra HD 58
HDMI, ARC 12
HDMI, DVI connection 14
Headphones Volume 57
Headphones, connect 19
Hearing impaired 63
Home Menu 37
Home Theatre System, Multichannel 18
Home Theatre System, problems 18
Home Theatre System, volume levelling 18
I
Incredible Surround 55
Interactive TV 31
Interactive TV, about 31
I
iTV 31
K
Keys on TV 24
L
Language settings 60
93
M
Media 42
Media files, from a computer or NAS 42
Media files, from a USB drive 42
Miracast™, switch on 44
Motion, Natural Motion 54
MPEG Artefact Reduction 54
N
Natural Motion 54
Network Frequency 67
Network Frequency Mode 67
Network installation 8
Network, Clear Wi-Fi Miracast connection 10
Network, connect 8
Network, problem 8
Network, settings 9
Network, static IP 9
Network, Switch on Wi-Fi 10
Network, TV Network Name 10
Network, view settings 9
Network, Wi-Fi Smart Screen 10
Network, wired 9
Network, wireless 8
Network, WoWLAN 9
Network, WPS 8
Network, WPS with PIN code 8
Noise Reduction 54
O
On a TV stand, TV Placement 57
On the wall, TV Placement 57
Online support 87
Open Source software 71
Options on a Channel 28
P
Parental Rating 28
Partially sighted 63
Pause TV 36
Photo camera, connect 22
Photos, videos and music 42
Picture Format 54
Picture Format, advanced 54
Picture Format, basic 54
Picture Style 51
Picture, Backlight Contrast 52
Picture, Colour 52
Picture, Sharpness 52
Pixel Plus link 14
Placement, TV placement 6
Placement, viewing distance 6
Power connection 6
Problems 85
Problems, Channels 85
Problems, Connection, HDMI 86
Problems, Connection, Internet 87
Problems, Connection, USB 86
Problems, Connection, Wi-Fi 87
Problems, Menu language 87
Problems, Picture 86
Problems, Remote control 85
Problems, Sound 86
Product Fiche 82
R
Radio stations 27
Reception Quality 67
Recording 35
Recording, TV Guide data 33
Register your product 85
Reinstall TV 66
Remote control and batteries 26
Rental videos 47
Repair 87
S
Safety instructions 88
SCART connection, tips 15
Screen care 89
Sharpness 52
Sharpness, MPEG Artefact Reduction 54
Sharpness, Noise reduction 54
Sharpness, Ultra Resolution 54
Sleep Timer 24
Smart Card, CAM 15
Smart TV 45
Software, Update 70
Sound Style 55
Sound, Auto Volume Levelling 55
Sound, Bass 55
Sound, Clear Sound 56
Sound, Headphones Volume 57
Sound, surround mode 55
Sound, Treble 55
Subtitle 29
Subtitle Language 29
Subtitle Language, Primary 29
Subtitle Language, Secondary 29
Support, online 87
Surround Mode 55
Switch off timer 24
Switching on 24
Synchronise Audio and Video 17
T
Teletext 30
Terms of Use 90
Test Reception 67
Text 30
Text language, Primary 31
Text language, Secondary 31
Treble 55
TV Guide 33
TV Guide, data and information 33
TV Guide, Reminder 34
TV Installation 66
U
Universal access 63
Universal access, Hard of hearing 63
Universal Access, Speakers/Headphones 63
USB Hard Drive, disk space 20
USB Hard Drive, Installation 20
USB Keyboard 21
USB Keyboard, connect 21
V
Video Selection 29
Visually impaired 63
W
Watch TV 28
Wi-Fi 8
Wired network 9
94
