Table of Contents
- Contents
- 1 - My new TV
- 2 - Setting up
- 3 - Network
- 4 - Connections
- 4.1 - Tips on connections
- 4.2 - EasyLink HDMI CEC
- 4.3 - Common interface - CAM
- 4.4 - Set-top box - STB
- 4.5 - Satellite receiver
- 4.6 - Home Theatre System - HTS
- 4.7 - Blu-ray Disc player
- 4.8 - DVD player
- 4.9 - Game console
- 4.10 - USB Hard Drive
- 4.11 - USB keyboard or mouse
- 4.12 - USB flash drive
- 4.13 - Photo camera
- 4.14 - Camcorder
- 4.15 - Computer
- 4.16 - Headphones
- 5 - Switch on
- 6 - Remote control
- 7 - TV channels
- 8 - Satellite channels
- 9 - Home menu
- 10 - TV guide
- 11 - Sources
- 12 - Timers and clock
- 13 - 3D
- 14 - Games
- 15 - Your photos, videos and music
- 16 - Pause TV
- 17 - Recording
- 18 - Skype
- 19 - Smart TV
- 20 - Multi room
- 21 - Settings
- 22 - Specifications
- 23 - Software
- 24 - Troubleshooting and support
- 25 - Safety and care
- 26 - Terms of use, copyrights and licenses
- Index
Philips 48PFS6909/12 User Manual
Displayed below is the user manual for 48PFS6909/12 by Philips which is a product in the TVs category. This manual has pages.
Related Manuals
Register your product and get support at Smart LED TV
www.philips.com/welcome
40PFK6909
40PFK6949
40PFK6959
40PFK6989
40PFS6909
40PFS6909
48PFK6909
48PFK6949
48PFK6959
48PFK6989
48PFS6909
48PFS6909
55PFK6909
55PFK6949
55PFK6959
55PFK6989
55PFS6909
55PFS6909
User Manual
Contents
1 My new TV 4
1.1 Smart TV 4
1.2 App gallery 4
1.3 Rental videos 4
1.4 Social networks 4
1.5 Ambilight+hue 4
1.6 Skype 5
1.7 Smartphones and tablets 5
1.8 Pause TV and recordings 5
1.9 Gaming 5
1.10 EasyLink 6
2 Setting up 7
2.1 Read safety 7
2.2 TV stand and wall mounting 7
2.3 Tips on placement 7
2.4 Power cable 7
2.5 Antenna cable 7
2.6 Satellite dish 8
3 Network 9
3.1 Wireless network 9
3.2 Wired network 10
3.3 Network settings 10
4 Connections 12
4.1 Tips on connections 12
4.2 EasyLink HDMI CEC 13
4.3 Common interface - CAM 14
4.4 Set-top box - STB 15
4.5 Satellite receiver 15
4.6 Home Theatre System - HTS 15
4.7 Blu-ray Disc player 17
4.8 DVD player 17
4.9 Game console 17
4.10 USB Hard Drive 18
4.11 USB keyboard or mouse 19
4.12 USB flash drive 20
4.13 Photo camera 20
4.14 Camcorder 20
4.15 Computer 21
4.16 Headphones 21
5 Switch on 23
5.1 On or Standby 23
5.2 Keys on TV 23
5.3 Word mark brightness 23
6 Remote control 24
6.1 Key overview 24
6.2 IR sensor for non-RF remote control 25
6.3 Batteries 25
6.4 Cleaning 25
7 TV channels 26
7.1 Watching TV channels 26
7.2 Channel installation 31
8 Satellite channels 35
8.1 Watching satellite channels 35
8.2 Satellite channel list 35
8.3 Favourite satellite channels 35
8.4 Lock satellite channels 36
8.5 Satellite installation 37
8.6 Problems with satellites 41
9 Home menu 42
10 TV guide 43
10.1 What you need 43
10.2 Using the TV guide 43
10.3 Recordings 43
11 Sources 44
11.1 Sources list 44
11.2 From standby 44
11.3 EasyLink 44
12 Timers and clock 45
12.1 Sleeptimer 45
12.2 Clock 45
12.3 Switch off timer 45
13 3D 46
13.1 What you need 46
13.2 The 3D glasses 46
13.3 Care of the 3D glasses 47
13.4 Watch 3D 47
13.5 Optimal 3D viewing 47
13.6 Health warning 47
14 Games 49
14.1 Play a game 49
14.2 Two-player games 49
15 Your photos, videos and music 50
15.1 From a USB connection or network computer 50
15.2 Wi-Fi Miracast 51
16 Pause TV 53
17 Recording 54
17.1 What you need 54
17.2 Record a programme 54
17.3 Watch a recording 54
18 Skype 56
18.1 About Skype 56
18.2 What you need 56
18.3 Start with Skype 56
18.4 Skype menu 57
18.5 My profile 57
18.6 People 58
18.7 Calling on Skype 59
18.8 Skype credit 60
18.9 Skype settings 60
18.10 Sign out 62
18.11 Quit Skype 62
18.12 Terms of use & Privacy Policy 62
19 Smart TV 63
2
19.1 About Smart TV 63
19.2 What you need 63
19.3 Setup Smart TV 63
19.4 Smart TV Apps 63
19.5 Multi view 65
19.6 Reset Smart TV 65
20 Multi room 66
20.1 About Multi room 66
20.2 What you need 66
20.3 Using Multi room 66
21 Settings 67
21.1 Setup menu 67
21.2 Picture 68
21.3 Sound 71
21.4 Ambilight 73
21.5 Universal access 75
22 Specifications 78
22.1 Environmental 78
22.2 Reception for non-satellite TVs 78
22.3 Reception for satellite TVs 79
22.4 Display 79
22.5 Power 79
22.6 Dimensions and weights (69x9 series) 79
22.7 Connectivity 80
22.8 Multimedia 80
23 Software 81
23.1 Software update 81
23.2 Software version 81
23.3 Open source software 81
23.4 Open source license 81
24 Troubleshooting and support 87
24.1 Troubleshooting 87
24.2 Register 88
24.3 Help 88
24.4 Online help 88
24.5 Consumer Care / Repair 89
25 Safety and care 90
25.1 Safety 90
25.2 Screen care 91
26 Terms of use, copyrights and licenses 92
26.1 Terms of use 92
26.2 Copyrights and licenses 92
Index 95
3
1
My new TV
1.1
Smart TV
Connect this Philips Smart LED TV to the Internet and discover
a new world of television. You can make a wired connection to
your router or you can link up wirelessly with Wi-Fi.
With the TV connected to your home network, a smartphone
can show a photo on TV, you can play videos stored on your
computer or control the TV with your tablet.
With your TV connected to the Internet, you can watch a rental
video from an online video store, read the online TV guide or
record your favourite TV show on a USB Hard Drive.
The Smart TV Apps add to the fun with all sorts of
entertainment and convenient services.
In Help, press Keywords and look up Smart TV for more
information.
1.2
App gallery
Open the App gallery in Smart TV to browse the Apps, the
collection of tailored websites for TV.
Find the App for YouTube videos, a national newspaper, an
online photo album, Facebook, Twitter, etc.
There are Apps to rent a video from an online video store and
Apps for watching programmes you missed.
If the App gallery does not hold what you are looking for, try
the World Wide Web and surf the Internet on TV.
In Help, press Keywords and look up App gallery for more
information.
1.3
Rental videos
To watch a rental video, you don't need to leave your home.
Simply rent the latest movie from your regional online
video store.
Start Smart TV and add the video store App to the Smart TV
start page.
Open the video store App, create your personal account, select
the movie and press play.
No fuss with downloading, you can watch the
movie immediately*.
In Help, press Keywords and look up Rental videos for
more information.
* Depending on the video streaming service of the selected
video store.
1.4
Social networks
No need to get up to check your friend's messages on your
computer.
Open Smart TV, select your social network page and send a
message back from your couch.
Smart TV supports the popular social networks Facebook and
Twitter.
In Help, press Keywords and look up App gallery for more
information.
1.5
Ambilight+hue
With Ambilight+hue, you can set up your Philips hue lamps to
follow the Ambilight colours of the TV.
The Philips hue lamps will expand the Ambilight effect across the
room. If you don’t have any Philips hue lamps yet, buy the
Philips hue Starter Kit (includes a hue bridge and 3 hue bulbs)
and install the bulbs and bridge. You can buy extra Philips hue
bulbs separately.
4
1.6
Skype
With Skype™ you can make video calls on your TV for free.
You can call and see your friends from anywhere in the world.
To make a video call, you need a camera with a built-in
microphone and a good connection to the Internet. Some
Philips TVs have a camera and microphone built in.
In Help, press Keywords and look up Skype for more
information.
1.7
Smartphones and tablets
To use your smartphone or tablet as a TV remote control or as
your media controller, download the Philips MyRemote app
from your smartphone or tablet app store.
Operate your TV from your smartphone or tablet, switch
channels or change the volume. With the MyRemote app, you
can use your phone or tablet to send photos, music or videos
from your computer to your TV. And with MyRemote app on a
tablet, you can call up the TV guide, read about the programmes
and switch the TV to a channel with a simple tap of your finger.
The MyRemote app is available for iOS and Android.
In Help, press Keywords and look up MyRemote app for
more information.
1.8
Pause TV and recordings
If you connect a USB Hard Drive, you can pause and record a
broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or simply take
a break during a sports match, while the TV stores the broadcast
on the USB Hard Drive. You can start watching again later.
With a USB Hard Drive connected, you can also record digital
broadcasts. You can record while you are watching a
programme or schedule a recording of an upcoming
programme.
In Help, press Keywords and look up Pause TV or
Recording for more information.
1.9
Gaming
If you select your game console in the Home menu, the TV
switches to the settings ideal for gaming automatically.
If you play a multi-player game with split screens, you can set the
TV to show each screen as a full screen simultaneously.
Each player can focus on his own game to play.
The TV uses 3D technology to show both screens. To play a
two-player game with two different full screen pictures, you
need a pair of 3D glasses for each player.
5
In Help, press Keywords and look up Game console or
Two player games for more information.
1.10
EasyLink
With EasyLink you can operate a connected device, like a Bluray
Disc player, with the remote control of the TV.
EasyLink uses HDMI CEC to communicate with the connected
devices.
In Help, press Keywords and look up EasyLink for more
information.
6
2
Setting up
2.1
Read safety
Read the safety instructions first before you use the TV.
In Help, go to Safety and care > Safety.
2.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV stand in the
Quick Start Guide that came with the TV. In case you lost this
guide, you can download it from www.philips.com.
Use the product type number of the TV to look for the Quick
Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the wall mount .
. .
To fix the bracket securely, use screws with a length indicated in
the drawing.
• For 6989/6959/6949/6909 series 55-inch TV (Minimum 16
mm, Maximum 20 mm)
VESA MIS-F 400x400, M6
• For 6989/6959/6949/6909 series 48-inch TV (Minimum 10
mm, Maximum 15 mm)
VESA MIS-F 300x300, M6
• For 6989/6959/6949/6909 series 40-inch TV (Minimum 16
mm, Maximum 20 mm)
VESA MIS-F 200x200, M6
Caution
Wall mounting the TV requires special skills and should only be
performed by qualified personnel. The TV wall mounting should
meet safety standards according to the TV's weight. Also read
the safety precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for improper
mounting or any mounting that results in accident or injury.
2.3
Tips on placement
• Position the TV where light does not shine directly on the
screen.
• Dim lighting conditions in the room for best Ambilight effect.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal screen
size. When seated, your eyes should be level with the centre of
the screen.
2.4
Power cable
• Insert the power cable into the POWER connector on the
back of the TV.
• Make sure the power cable is securely inserted in the
connector.
• Make sure that the power plug, in the wall socket, is accessible
at all times.
• When you unplug the power cable, always pull the plug, never
pull the cable.
Although this TV has a very low standby power consumption,
unplug the power cable to save energy if you do not use the TV
for a long period of time.
In Help, press Keywords and look up Switching on for more
information on switching the TV on or off.
7
2.5
Antenna cable
Insert the antenna plug firmly into the ANTENNA socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6
Satellite dish
Attach the satellite F-type connector to the satellite connection
SAT at the back of the TV.
8
3
Network
3.1
Wireless network
What you need
To connect the TV wirelessly to the Internet, you need a
wireless router. Use a high-speed (broadband) connection to
the Internet..
Network devices
The TV can connect to other devices in your wireless network,
like your computer or smartphone. You can use a computer
with Microsoft Windows or Apple OS X.
File sharing
On this TV, you can open photos, music and videos stored on
your computer. Use a recent version of media server software
like Philips MediaManager*, Windows Media Player 11,
Twonky™ or similar.
Install the media server software on your computer and set it up
to share your media files with the TV. Read the manual of the
media server software for more information. This software must
be running on your computer to view or play your files on TV.
* You can download the Philips MediaManager software from
the Philips support site www.philips.com/support
Make the connection
Follow steps 1 to 5.
Step 1 - Make sure that the router of your wireless network is
switched on.
Step 2 - Press and select Setup and press OK.
Step 3 - Select Connect to network and press OK.
Step 4 - Select Connect and press OK.
Step 5 - Select Wireless and press OK.
Step 6 - Select Scan to scan for your wireless network. If you
have a router with WPS (Wi-Fi Protected Setup), you can select
WPS. Select your choice and press OK.
• Scan
Select Scan to scan for your wireless network (your wireless
router). The TV might find several wireless networks in your
proximity.
• WPS
If your router has WPS, you can directly connect to the router
without scanning. Go to the router, press the WPS button and
return to the TV within 2 minutes. Then press Connect to make
the connection.
If you have devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
If you must use the WPS PIN code to connect, select Scan
instead of WPS.
Step 7 - In the list of networks found, select your wireless
network and press OK.
If your network is not in the list because the network name is
hidden (you switched off the SSID broadcast of the router),
select Manual entry to enter the network name yourself.
Step 8 - Depending on the type of router, you can now enter
your encryption key (WEP, WPA or WPA2). If you entered the
encryption key for this network before, you can select Next to
make the connection immediately.
If your router supports WPS or WPS PIN, you select WPS,
WPS PIN or Standard. Select your choice and press OK.
• Standard
Select Standard to enter the encryption key (password,
passphrase or security key) manually.You can use the keyboard
on the RC to enter the encryption key. Once you have entered
the key, press Connect.
• WPS PIN
To make a secured WPS connection with a PIN code, select
WPS PIN and press OK. Write down the 8-digit PIN code
shown and enter it in the router software on your PC. Return to
the TV and press Connect. Consult the router manual on where
to enter the PIN code in the router software.
Step 9 - A message will be shown when the connection is
successful.
Network configuration
If the connection fails, you can check the DHCP setting of the
router. DHCP should be set to On.
Alternatively, if you are an advanced user and want to install
your network with Static IP addressing, set the TV to Static IP.
To set the TV to Static IP, press and select Setup and press
OK. Select Network settings > Network settings > Network
configuration > Static IP. With Static IP selected in the menu,
you can set the IP address and other necessary settings in Static
IP configuration in the same menu.
9
Network problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n
devices in your proximity might disturb the wireless network.
• Make sure that the firewalls in your network allow access to
the TV's wireless connection.
• If the wireless network does not work properly in your home,
try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the router
connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for information on
indoor range, transfer rate and other factors of signal quality.
• Use a high-speed (broadband) Internet connection for your
router.
3.2
Wired network
What you need
You need a network router to connect the TV to the Internet.
Use a router with a high-speed (broadband) connection to the
Internet.
File sharing
On this TV, you can open photos, music and videos stored on
your computer. Use a recent version of media server software
like Philips MediaManager*, Windows Media Player 11,
Twonky™ or similar.
Install the media server software on your computer and set it up
to share your media files with the TV. Read the manual of the
media server software for more information. This software must
be running on your computer to view or play your files on TV.
* You can download the Philips MediaManager software from
the Philips support site www.philips.com/support
In Help, press Keywords and look up Media server
software, supported for an overview of supported media server
software.
Connect the router
To connect and setup the router follow steps 1 to 5.
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - Press and select Setup and press OK.
4 - Select Connect to network and press OK.
5 - Select Wired and press OK.
The TV constantly searches for the network connection. A
message will be shown when the connection is successful.
Network configuration
If the connection fails, you can check the DHCP setting of the
router. DHCP should be set to On.
Alternatively, if you are an advanced user and want to install
your network with static IP addressing, set the TV to Static IP.
To set the TV to Static IP, press and select Setup and
press OK.
Select Network settings > Network settings > Network
configuration > Static IP. With Static IP selected in the menu,
you can set the IP address and other necessary settings in Static
IP configuration in the same menu.
**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet
cable.
3.3
Network settings
To open the Network settings . . .
1 - Press and select Setup and press OK.
2 - Select Network settings and press OK.
• View network settings
All current network settings are shown here. The IP and MAC
address, signal strength, speed, encryption method, etc.
• Network settings
- Network type
Sets the network to Wired or Wireless.
- Network configuration
Sets the network configuration to DHCP or Static IP.
• Wi-Fi media playback
To receive multimedia files from smartphones or tablets, set the
DMR to On.
• Static IP configuration
If Static IP is selected in Network Settings menu, you can set all
necessary static IP settings here.
• Wi-Fi Miracast
10
For more information on Wi-Fi Miracast,
press Keywords and look up Wi-Fi Miracast™.
• Reset Wi-Fi Miracast group
Clear the list of connected and blocked devices that are used
with Miracast.
• Wi-Fi smart screen
For more information on Wi-Fi smart screen,
press Keywords and look up Wi-Fi smart screen.
• TV network name
If you have more than one TV in your network, you can rename
the TVs here.
• Netflix Settings
Adjust Netflix settings.
• Clear Internet memory
With Clear Internet memory, you can clear all Internet files
stored on your TV. You clear your Philips Smart TV registration
and parental rating settings, your video store app logins, all Smart
TV app favourites, Internet bookmarks and history. Interactive
MHEG applications can also save so-called 'cookies', on your TV.
These files will also be cleared.
11
4
Connections
4.1
Tips on connections
Connectivity guide
Always connect a device to the TV with the highest quality
connection available. Also, use good quality cables to ensure a
good transfer of picture and sound.
If you need help to connect several devices to the TV, you can
visit the Philips TV connectivity guide. The guide offers
information on how to connect and which cables to use.
Go to www.connectivityguide.philips.com
Antenna
If you have a Set-top box (a digital receiver) or Recorder,
connect the antenna cables to run the antenna signal through
the Set-top box and/or Recorder first before it enters the TV. In
this way, the antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI
HDMI CEC
An HDMI connection has the best picture and sound quality.
One HDMI cable combines video and audio signals. Use an
HDMI cable for High Definition (HD) or Ultra HD (UHD) TV
signals. For best signal quality transfer, use a High speed HDMI
cable and do not use an HDMI cable longer than 5 m.
EasyLink HDMI CEC
If your devices are connected with HDMI and have EasyLink, you
can operate them with the TV remote control. EasyLink HDMI
CEC must be switched On on the TV and the connected
device.
For more information on using EasyLink, press Keywords
and look up EasyLink CEC.
DVI to HDMI
Use a DVI to HDMI adapter if your device only has a DVI
connection. Use one of the HDMI connections and add an
Audio L/R cable (mini-jack 3.5mm) to AUDIO IN for sound, on
the back of the TV.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal that
prevents copying content from a DVD disc or Blu-ray Disc. Also
referred to as DRM (Digital Rights Management).
HDMI ARC
All of the HDMI connections on the TV have HDMI ARC
(Audio Return Channel).
If the device, typically a Home Theatre Sysytem (HTS), also has
the HDMI ARC connection, connect it to any of the HDMI
connections on this TV. With the HDMI ARC connection, you
do not need to connect the extra audio cable that sends the
sound of the TV picture to the HTS. The HDMI ARC
connection combines both signals.
You can use any HDMI connection on this TV to connect the
HTS but ARC is only available for 1 device/connection at a time.
In case you prefer to switch off ARC on the HDMI connections,
press and select Setup and press OK.
Select TV settings > Sound > Advanced > HDMI ARC.
Y Pb Pr - Audio L R
Y Pb Pr - Component Video is a high quality connection. The
YPbPr connection can be used for High Definition (HD) TV
signals. Next to the Y, Pb and Pr signals add the Audio Left and
Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
12
• Only for TVs with component connectors.
CVBS - Audio L R
CVBS - Composite Video is a high quality connection. Next to
the CVBS signal adds the Audio Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
• Only for TVs with component/composite connectors.
Scart
SCART is a good quality connection. The SCART connection
can be used for CVBS and RGB video signals but cannot be used
for High Definition (HD) TV signals. The SCART connection
combines video and audio signals.
Use the SCART adapter cable to connect your device.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection. This
optical connection can carry 5.1 audio channels. If your device,
typically a Home Theatre System (HTS), has no HDMI ARC
connection, you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out - Optical
connection sends the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the audio
capabilities of your Home Theatre System.
For more information, press Keywords and look up Audio
Out settings.
If the sound does not match the video on screen, you can adjust
the audio to video synchronisation.
For more information, press Keywords and look up Audio
to video sync.
4.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC (Consumer
Electronics Control) to communicate with the connected
devices. Devices must support HDMI CEC and must be
connected with an HDMI connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure that all
HDMI CEC settings are properly set up on the connected
EasyLink devices. EasyLink might not work with devices from
other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on different
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
13
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully
compatible with EasyLink.
Example HDMI CEC branding names are property of their
respective owners.
Operate devices
To operate a device connected to HDMI and set up with
EasyLink, select the device - or its activity - in the list of TV
connections. Press SOURCES, select a device connected to
an HDMI connection and press OK.
Once the device is selected, the TV remote control can control
the device. However and OPTIONS keys and some
other TV keys are not forwarded to the device.
If the key you need is not on the TV remote control, you can
select the key in the Options menu.
Press OPTIONS and select Controls in the menu bar. On
the screen, select the device key you need and press OK.
Some very specific device keys might not be available in the
Controls menu.
Note: Only devices that support EasyLink remote control
function will respond to the TV remote control.
EasyLink settings
The TV comes with all EasyLink settings switched on. You can
switch off any EasyLink setting independently.
EasyLink
To switch off EasyLink completely . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > EasyLink, and press
OK.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the menu.
EasyLink Remote Control
If you want devices to communicate but you don't want to
operate them with the TV remote control, you can switch off
EasyLink remote control separately.
In the EasyLink settings menu, select EasyLink remote control
and select Off.
Pixel Plus Link
Some devices, a DVD or Blu-ray Disc player, might have their
own picture quality processing. To avoid bad picture quality
caused by interference with the TV processing, the picture
processing of these devices should be disabled. The TV comes
with Pixel Plus Link switched on and disables the picture quality
processing of recent Philips devices connected to the TV.
To switch off Pixel Plus Link, in the EasyLink settings menu,
select Pixel Plus Link and select Off.
Auto subtitle shift
If you play a DVD or Blu-ray Disc on a Philips disc player that
supports subtitles, the TV can move the subtitles upwards.
Subtitles will be visible whatever Picture format you select. The
TV comes with Auto subtitle shift switched on.
To switch off Auto subtitle shift, in the EasyLink settings menu,
select Auto subtitle shift and select Off.
Auto switch off devices
You can set the TV to switch off the connecting HDMI-CEC
compliant devices if they are not the active source. The TV
switches the connected device to standby after 10 minutes of
inactivity.
4.3
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes, like movies
and sports, offered by digital TV broadcasters in your region.
These programmes are scrambled by the TV broadcaster and
descrambled with a prepaid CI+ module.
Digital TV broadcasters provide this CI+ module (Conditional
Access Module - CAM) when you subscribe to their premium
programmes. These programmes have a high level of copy
protection.
Contact a digital TV broadcaster for more information on terms
& conditions.
For more information on connecting a CAM module, press
Keywords and look up Common Interface CAM.
CAM
Insert a CAM module
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion. Incorrect
insertion can damage the CAM and TV.
14
Use the Common Interface slot on the TV to insert the CAM
card.
With the front of the card facing towards you, gently insert the
CAM as far as it will go.
Leave the card in the slot permanently.
It may take a few minutes before the CAM is activated.
Removing the CAM will deactivate the broadcast service on TV.
If a CAM is inserted and subscription fees are paid, (connection
methods can differ), you can watch the TV broadcast. The
inserted CAM is exclusively for your TV.
CAM settings
To set passwords or PIN codes for the CAM TV broadcast,
press and select Setup and press OK.
Select Channel settings > Common Interface.
Select the CAM TV broadcaster and press OK.
4.4
Set-top box - STB
Use 2 antenna cables to connect the antenna to the Set-top box
(a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable to
connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-top box has
no HDMI connection.
Switch off timer
Switch off this automatic timer, if you only use the remote
control of the Set-top box. Do this to prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the Switch off timer, press and select Setup and
press OK.
Select TV settings > General settings > Switch off timer and
set the slider bar to Off.
4.5
Satellite receiver
• Connect the dish antenna cable to
the Satellite receiver.
Next to the antenna connection, add an HDMI cable to connect
the device to the TV.
Alternatively, you can use a SCART cable if the device has no
HDMI connection.
Switch off timer
Switch off this automatic timer, if you only use the remote
control of the Set-top box. Do this to prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the Switch off timer, press and select Setup and
press OK.
Select TV settings > General settings > Switch off timer and
set the slider bar to Off.
15
4.6
Home Theatre System - HTS
Connect HTS
Use an HDMI cable to connect a Home Theatre System (HTS)
to the TV. You can connect a Philips Soundbar or an HTS with a
built-in disc player.
Alternatively, you can use a SCART cable if the device has no
HDMI connection.
HDMI ARC
If your Home Theatre System has an HDMI ARC connection,
you can use any HDMI connection on the TV to connect. With
HDMI ARC, you do not need to connect the extra audio cable.
The HDMI ARC connection combines both signals.
All HDMI connections on the TV can offer the Audio Return
Channel (ARC) signal. But once you have connected the Home
Theatre System, the TV can only send the ARC signal to this
HDMI connection.
If the Home Theatre System has no HDMI ARC connection,
add an optical audio cable (Toslink) to send the sound of the TV
picture to the Home Theatre System.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you can set a
delay on most Home Theatre Systems with a disc player to
match the sound with the video.
For more information, press Keywords and look up Audio
to video sync.
Audio Out settings
Audio Out delay
With a Home Theatre System (HTS) connected to the TV, the
picture on TV and the sound from the HTS should be
synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio to video
sync is done automatically synchronised and always correct.
Audio sync delay
For some Home Theatre Systems you might need to adjust the
audio sync delay to synchronise the audio to the video. On the
HTS, increase the delay value until there is a match between
picture and sound. A delay value of 180ms may be required.
Read the user manual of the HTS. With a delay value set up on
the HTS, you need to switch off Audio out delay on the TV.
To switch off the Audio Out delay . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Audio out delay.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out offset
If you cannot set a delay on the Home Theatre System, you can
set the TV to sync the sound. You can set an offset that
compensates for the time necessary for the Home Theatre
System to process the sound of the TV picture. You can set the
value in steps of 5ms. Maximum setting is -60ms. The Audio Out
delay setting should be switched on.
To synchronise the sound on the TV . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Audio out offset.
3 - Use the slider bar to set the sound offset and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like Dolby
Digital, DTS® or similar, set the Audio out format to
Multichannel. With Multichannel, the TV can send the
compressed multichannel sound signal from a TV channel or
connected player to the Home Theatre System. If you have a
Home Theatre System without multichannel sound processing,
select Stereo.
To set the Audio out format . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Audio out
16
format.
3 - Select Multichannel or Stereo.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out levelling
Use the Audio Out levelling setting to level the volume
(loudness) of the TV and the Home Theatre System when you
switch over from one to another. Volume differences can be
caused by differences in sound processing.
To level the difference in volume . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Audio out
levelling.
3 - If the volume difference is large, select More. If the volume
difference is small, select Less.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out levelling affects both the Audio Out - Optical and
HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive or
connected computer, the sound from your Home Theatre
System might be distorted. This noise is heard when the audio
or video file has DTS sound but the Home Theatre System has
no DTS sound processing. You can fix this by setting the Audio
out format of the TV to Stereo.
Press and select Setup > TV settings > Sound > Advanced >
Audio out format.
No sound
If you cannot hear the sound from the TV on your Home
Theatre System, check the following . . .
• Check if you connected the HDMI cable to an HDMI ARC
connection on the Home Theatre System. All HDMI
connections on the TV are HDMI ARC connections.
• Check if the HDMI ARC setting on the TV is switched On.
Press and select Setup > TV settings > Sound > Advanced >
HDMI ARC.
4.7
Blu-ray Disc player
Use a High speed HDMI cable to connect the Blu-ray Disc
player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC, you can
operate the player with the TV remote control.
For more information on EasyLink, press Keywords and look
up EasyLink HDMI CEC.
4.8
DVD player
Use an HDMI cable to connect the DVD player to the TV.
Alternatively, you can use a SCART cable, if the device has no
HDMI connection.
If the DVD player is connected with HDMI and has EasyLink
CEC, you can operate the player with the TV remote control.
For more information on EasyLink, press Keywords and
look up EasyLink HDMI CEC.
4.9
Game console
HDMI
For best quality, connect the game console with an High speed
HDMI cable to the TV
17
Y Pb Pr - Audio L R
Connect the game console with a component video cable (Y Pb
Pr) and an audio L/R cable to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
CVBS - Audio L R / Scart
Connect the game console to the TV with a composite cable
(CVBS) and an audio L/R cable to the TV.
If your game console only has Video (CVBS) and Audio L/R
output, use a Video Audio L/R to SCART adapter to connect to
the SCART connection.
Note: the CVBS to SCART Adapter is not provided in the TV
set.
CVBS - Audio L R
Connect the game console to the TV with a composite cable
(CVBS) and an audio L/R cable to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.10
USB Hard Drive
What you need
If you connect a USB Hard Drive, you can pause or record a TV
broadcast. The TV broadcast must be a digital broadcast (DVB
broadcast or similar).
To pause
To pause a broadcast, you need a USB 2.0 compatible Hard
Drive with a minimum of 32GB disk space.
To record
To pause and record a broadcast, you need a minimum of
250GB disk space.
TV guide
Before you decide to buy a USB Hard Drive to record, you can
check if it is possible to record digital TV channels in your
country.
Press TV GUIDE on the remote control. If there is a Record
button on the TV guide page, you can record.
For more information on how to install a USB Hard Drive, press
Keywords and look up USB Hard Drive, installation.
18
Installation
Before you can pause or record a broadcast, you must connect
and format a USB Hard Drive. If you want to record a broadcast
with TV guide data from the Internet, you need to have the
Internet connection installed on your TV before you install the
USB Hard Drive. Formatting removes all files from the USB
Hard Drive.
1 - Connect the USB Hard Drive to one of the USB
connections on the TV. Do not connect another USB device to
the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel, press
(Pause). Trying to pause will start the formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it connected
permanently.
Warning
The USB Hard Drive is formatted exclusively for this TV, you
cannot use the stored recordings on another TV or PC. Do not
copy or change recording files on the USB Hard Drive with any
PC application. This will corrupt your recordings. When you
format another USB Hard Drive, the content on the former will
be lost. A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
For more information, press Keywords and look up Pause
TV or Recording.
4.11
USB keyboard or mouse
USB keyboard
Connect a USB keyboard (USB-HID type) to enter text on your
TV.
You can connect a keyboard and a mouse to the TV.
Use one of the USB connections to connect.
Install the keyboard
To install the USB keyboard, switch on the TV and connect the
USB keyboard to one of the USB connections on the TV. When
the TV detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you select a
Cyrillic or Greek keyboard lay-out first, you can select a
secondary Latin keyboard lay-out.
To change the keyboard lay-out setting when a lay-out was
selected…
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > USB keyboard
settings and press OK.
Keys for channel renaming
• Enter key = OK
• Backspace = delete character before cursor
• Arrow keys = navigate within a text field
• To switch between keyboard lay-outs, if a secondary lay-out is
set, press the Ctrl + Shift keys simultaneously.
Keys for Smart TV Apps and Internet pages
• Shift + Tab = Next and Previous
• Home = scroll to the top of the page
• End = scroll to the bottom of the page
• Page Up = jump one page up
• Page Down = jump one page down
• + = zoom in one step
• - = zoom out one step
• * = fit the web page to the screen width.
USB mouse
Connect USB mouse
You can connect a USB mouse (USB-HID type) to navigate
pages on the Internet.
On an Internet page, you can select and click on links more
easily.
Connect the mouse
Switch the TV on and connect the USB mouse to one of the
USB connections on the TV. You can also connect the USB
mouse to a connected USB keyboard.
Mouse clicks
• Left click = OK
• Right click = Back
19
You can use the scroll wheel to scroll pages up and down.
For more information on how to connect a keyboard,
press Keywords and look up USB keyboard.
Mouse speed
You can adjust the speed of the mouse moving on screen.
To adjust the speed . . .
1 - Press and select Setup and press OK.
2 - Select TV settings and press OK.
3 - Select General settings > Pointer / Mouse settings and
press OK.
4 - Press the arrows (up) or (down) to increase or lower
the speed.
5 - Press OK to store and close the setting.
6 - Press , repeatedly if necessary, to close the menu.
4.12
USB flash drive
You can view photos or play your music and videos from a
connected USB flash drive.
Insert a USB flash drive in one of the USB connections on the
TV while the TV is switched on.
The TV detects the flash drive and opens a list showing its
content.
If the contents list does not appear automatically, press
SOURCE, select USB and press OK.
To stop watching the USB flash drive content, press EXIT or
select another activity.
To disconnect the USB flash drive, you can pull out the flash
drive anytime.
For more information on watching or playing content from a
USB flash drive, press Keywords and look up Your photos,
videos and music.
4.13
Photo camera
To view photos stored on your digital photo camera, you can
connect the camera directly to the TV.
Use one of the USB connections on the TV to connect. Switch
on the camera after you made the connection.
If the contents list does not appear automatically, press
SOURCE, select USB and press OK.
Your camera might need to be set to transfer its content with
PTP (Picture Transfer Protocol). Read the user manual of the
digital photo camera.
For more information on viewing photos, press
Keywords and look up Your photos, videos and music.
Ultra HD on USB
You can view photos in Ultra HD resolution from a connected
USB device or flash drive. The TV will downscale the resolution
to Ultra HD if the resolution of the photo is higher. You cannot
play a native Ultra HD video on any of the USB connections.
4.14
Camcorder
HDMI
For best quality, use an HDMI cable to connect the camcorder
to the TV.
CVBS - Audio L R / Scart
You can use an HDMI, YPbPr or SCART connection to connect
your camcorder. If your camcorder only has Video (CVBS) and
Audio L/R output, use a Video Audio L/R to SCART adapter to
connect to the SCART connection.
Note: the CVBS to Scart Adaptor is not provided in the TV set.
20
CVBS - Audio L R
Use a Video Audio L/R cable to connect the camcorder to the
TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.15
Computer
Connect
You can connect your computer to the TV and use the TV as a
PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the TV.
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to connect
the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to
AUDIO IN L/R on the back of the TV.
Settings
Ideal monitor setting
If your computer is added as a Computer type of device in the
Source menu (the list of connections), the TV is set to the ideal
Computer setting automatically.
If you use your computer to watch movies or use it to play
games, you might want to set the TV back to the ideal TV
watching or gaming setting.
To set the TV to the ideal setting manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Activity
style and press OK.
3 - Select Game (for gaming) or select Computer (for watching
a movie) and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Remember to set the Game or computer setting back
to Computer when you stop playing the game.
4.16
Headphones
You can connect a set of headphones to the connection on
the TV. The connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
To adjust the volume . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Headphones volume and
press OK.
3 - Press (up) or (down) to adjust the volume.
4 - Press , repeatedly if necessay, to close the menu.
21
22
5
Switch on
5.1
On or Standby
Make sure you plugged in the mains power on the back of the
TV before you switch on the TV.
If the red indicator light is off, press the Joystick on the right side
or on the back of the TV to put the TV in standby - the red
indicator will light up.
With the TV in standby, press onon the remote control to
switch the TV on.
Switch to standby
To switch the TV to standby, press on the remote control.
Switch Off
To switch the TV Off, press the Joystick on the right or on the
back. The red indicator light is off. The TV is still connected to
the mains power but consumes a minimum of energy.
To switch off the TV completely, disconnect the power plug.
When disconnecting the power plug, always pull the power plug,
never the cord. Ensure that you have full access to the power
plug, power cord and outlet socket at all times.
5.2
Keys on TV
While the on-screen display is on, press the Joystick to display
the menu.
• Use the arrow/nevigation keys to nevigate up, down, left or
right.
• Press the Joystick to confirm a selection or setting.
5.3
Word mark brightness
You can switch off or adjust the word mark lighting.
To adjust or switch off…
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Word mark
brightness and press OK.
3 - Select Maximum, Medium, Minimum or select Off to switch
off the lighting of the word mark.
4 - Press , repeatedly if necessary, to close the menu.
• Only available for certain TV models
23
6
Remote control
6.1
Key overview
Top
1 - Standby / On
To switch the TV On or back to Standby.
2 - Playback and record keys
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to record now
3 - Ambilight
To select an Ambilight setting.
4 - TV GUIDE
To open or close the TV guide.
5 - Settings
To open the Settings menu.
6 - Picture format
To open or close the Picture format menu.
7 - SOURCES
To open or close the Sources menu - the list of connected
devices.
8 - SEARCH
To open the Popular searches page.
Middle
1 - SMART TV
To open the Smart TV start page.
2 - Colour keys
Follow on screen instructions. Blue key , opens Help.
3 - INFO
To open or close programme info.
4 - BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
To go back to the previous Smart TV page.
5 - HOME
To open or close the home menu.
6 - EXIT
To switch back to watching TV.
7 - OPTIONS
To open or close the Options menu.
8 - OK key
To confirm a selection or setting.
9 - Arrow / navigation keys
To navigate up, down, left or right.
10 - MULTIVIEW
To open an extra small screen.
Bottom
1 - Volume
To adjust the volume level.
2 - Number keys and text keypad
To select a TV channel directly or to enter text.
3 - SUBTITLE
To switch subtitles on, off or Automatic.
24
4 - LIST
To open or close the channel list.
5 - Channel
To switch to the next or previous channel in the channel list.
To open the next or previous page in Text or start the next or
previous chapter on a disc.
6 - Mute
To mute the sound or to restore it.
7 - TEXT
To open or close Text / Teletext.
6.2
IR sensor for non-RF remote
control
The TV can receive commands from a remote control that uses
IR (infrared) to send commands. If you use such a remote
control, always make sure you point the remote control at the
infrared sensor on the front of the TV.
6.3
Batteries
1 - Slide the battery door in the direction shown by the arrow.
2 - Replace the old batteries with 2 type AAA-R03-1.5V
batteries. Make sure the + and the - ends of the batteries line up
correctly.
3 - Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for
a long time.
Safely dispose of your old batteries according to the end of use
directions.
For more information, press Keywords and look up End of
use.
6.4
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the remote control.
25
7
TV channels
7.1
Watching TV channels
Switch channels
To watch TV channels, press . The TV tunes to the TV
channel you last watched.
Alternatively, press to open the Home menu and select
Watch TV and press OK.
To switch channels, press + or -. If you know the channel
number, type in the number with the number keys. Press OK
after you entered the number to switch channels.
To switch back to the previously tuned channel, press .
To switch to a channel from a channel list
While watching a TV channel, press LIST to open the
channel lists.
The channel list can have several pages with channels. To view
the next or previous page, press + or -.
To close the channel lists without switching channels, press
LIST again.
Radio channels
If digital broadcasting is available, digital radio stations are
installed during installation. Switch to a radio channel just like you
switch to a TV channel.
Channel list
Favourite channels
You can create a favourite channel list that only holds the
channels you want to watch. With the Favourite channel list
selected, you will only see your favourite channels when you
switch through channels.
Create your favourite channel list
1 - While watching a TV channel, press LIST to open the
channel list.
2 - Select All to view all channels.
3 - Select the channel, and press to mark as favourite.
4 - The selected channel is marked with a .
5 - To finish, press . The channels are added to the Favourites
list.
To remove a channel from the favourites list, select the channel
with , then press again to unmark as favourite.
Reorder
You can reorder — reposition — channels in the Favourite
channel list.
1 - In the channel list Favourites, highlight the channel you want
to reposition.
2 - Press .
3 - Select the channel to reorder and press OK.
4 - Press the Navigation buttons to move the highlighted
channel to another location and press OK.
5 - Once complete, press EXIT to exit from the Favourite
channel list.
You can highlight another channel and do the same.
Channel list views
In the channel lists, you can find all installed TV and radio
channels.
Next to the channel list All, which holds all installed channels,
you can set up a list of Favourites, view the
installed Radio stations separately or discover the newly added
channels in New.
Channel logos
In some countries, the TV can show the channel logos. If you do
not want these logos to appear, you can switch them off.
To switch off Channel logos . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Channel logos and
press OK.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the menu.
26
Rename channels
You can rename channels in the channel list.
1 - Select the channel you want to rename in one of the channel
lists.
2 - Select the channel to rename.
3 - Press .
You can enter text with the remote control keyboard or open
the on-screen keyboard.
With the on-screen keyboard
• To open the on-screen keyboard, place the cursor in the
name text field and press OK.
• To delete the character in front of the cursor, press
Backspace.
• To enter a character, select the character with the arrow keys
and press OK.
• To select uppercase characters, press .
• To select numbers or special characters, press .
• When you are ready, press to close the on-screen
keyboard.
• To finish renaming, select Done and press OK.
With the remote control keyboard*
• To delete a character, position the cursor behind the character
and press .
• To enter a character, press the character on the keyboard.
• When you are ready, press OK to select Done.
Press OK again to finish renaming.
For more information on using the keyboard,
press Keywords and look up Remote control, keyboard.
* Only for the remote control with keyboard
Lock a channel
To prevent children from watching a channel or a programme,
you can lock channels or lock age rated programmes.
Lock a channel
You can lock a channel to prevent children from watching it. To
watch a locked channel you need to enter the Child lock code.
You cannot lock programmes from connected devices.
To lock a channel . . .
1 - While watching a TV channel, press LIST to open the
Channel list.
2 - In any list, select the channel you want to lock.
3 - Press OPTIONS and select Lock channel. In a channel
list, a locked channel is marked with a lock .
To unlock a channel, select the locked channel in the channel list.
Press OPTIONS and select Unlock channel. You will need
to enter the Child lock code.
Parental rating
To prevent children from watching a programme not suitable for
their age, you can use an age rating.
Some digital broadcasters have age rated their programmes.
When the age rating of a programme is equal to or higher than
the age you have set as age rating for your child, the programme
will be locked.
To watch a locked programme you must enter the child lock
code. The parental age rating is set for all channels.
To set an age rating . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Child lock > Parental rating and
press OK.
3 - Enter a 4-digit Child lock code and confirm. Now you can set
an age rating.
4 - Set the age and press OK.
5 - Press , repeatedly if necessary, to close the menu.
To switch off the parental age rating, select None as age setting.
The TV will ask for the code to unlock the programme. For
some broadcasters / operators, the TV only locks programmes
with a higher rating.
Set or change the lock code
To set the lock code or to change the current code . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Child lock > Change code and
press OK.
3 - If a code is set already, enter the current Child lock code and
then enter the new code twice.
The new code is set.
Forgotten your Child lock code?
If you forgot your code, you can override the current code and
enter a new code.
1 - Press and select Setup and press OK.
2 - Select Channel settings > Child lock > Change code and
press OK.
3 - Enter the overriding code 8888.
4 - Now enter a new Child lock code and enter it again to
confirm.
Options for channels
While watching a channel, depending on the type of channel
(analogue or digital) you are watching or depending on the TV
settings you made, some options are available.
Open the options menu
While watching a channel, press OPTIONS.
27
Universal access
With Universal access switched on, you can set some options
for hearing impaired and visually impaired people.
For more information, press Keywords and look up
Universal access.
Video selection
Digital TV channels can offer multi video signals (multi-feed
broadcast), different camera viewpoints or angles of the same
event or different programmes on one TV channel. The TV
shows a message if any such TV channels are available.
Subtitles
Switch Subtitles on or Subtitles off with this options. Select
Automatic to show subtitles only when the sound is muted with
.
Subtitle language
For digital broadcast, you can select an available subtitle language
temporarily if none of your preferred languages are available.
For more information, press Keywords and look up
Subtitles.
Audio languages
For digital broadcast, you can select an available audio language
temporarily if none of your preferred languages are available.
For more information, press Keywords and look up Audio
languages.
Dual I-II
If an audio signal contains two audio languages but one language
— or both — has no language indication, this option is available.
Common interface
If prepaid premium content is available from a CAM, you can set
the provider settings with this option.
HbbTV on this channel
You can block the HbbTV pages from a channel that offers
HbbTV.
For more information, press Keywords and look up HbbTV.
MHP applications
Enable or disable the MHP applications.
For more information, press Keywords and look up MHP.
Status
Select Status to view technical information on the channel (if it is
analogue or digital) or a connected device you are watching.
Share
Enables the user to communicate his activity with his social
networks (such as Twitter, facebook or email).
Picture format
If black bars appear on top and bottom or on both sides of the
picture, you can adjust the picture format to a format that fills
the screen.
To change the picture format . . .
1 - While watching a TV channel, press to open the Picture
format menu.
2 - Select a format from the list and press OK.
The following format can be available according the picture on
screen . . .
• Basic
- Fill screen
- Fit to screen
• Advanced
- Last setting
- Shift
- Zoom
- Stretch
- Native
- Undo
Text / Teletext
Text pages
To open Text (Teletext) while you are watching TV channels,
press TEXT.
To close Text, press TEXT again.
Select a Text page
To select a page . . .
1 - Enter the page number with the number keys.
2 - Use the arrow keys to navigate.
28
3 - Press a colour key to select a colour-coded subject at the
bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The subpage
numbers are shown on a bar next to the main page number.
To select a subpage, press or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press OPTIONS and select T.O.P. overview.
Text options
In Text, press OPTIONS to select the following . . .
• Freeze page
To stop the automatic rotation of subpages.
• Dual screen / Full screen
To show the TV channel and Text alongside each other.
• T.O.P. overview
To open T.O.P. Text.
• Enlarge
To enlarge the Text page for comfortable reading.
• Reveal
To unhide hidden information on a page.
• Cycle subpages
To cycle subpages when these are available.
• Language
To switch the group of characters that Text uses to display
correctly.
• Text 2.5
To activate the Text 2.5 for more colours and better graphics.
Text setup
Text language
Some digital TV broadcasters have several Text languages
available.
To set your primary and secondary Text language . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Language.
3 - Select Primary Teletext or Secondary Teletext.
4 - Select your preferred Text languages.
5 - Press , repeatedly if necessary, to close the menu.
Text 2.5
If available, Text 2.5 offers more colours and better graphics.
Text 2.5 is activated as a standard factory setting.
To switch off Text 2.5 . . .
1 - Press TEXT.
2 - While watching the teletext, press OPTIONS.
3 - Select Text 2.5 > Off.
4 - Press , repeatedly if necessary, to close the menu.
Menu language
To change the language or the TV menus and messages . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Menu language and
press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Audio languages
If the TV channel broadcasts multiple or dual audio languages,
you can select your preferred audio language.
1 - While you watch TV, press OPTIONS.
2 - For digital channels, select Audio language. For analogue
channels, select Alternate audio. Press OK to confirm your
selection.
3 - Select from the available languages, then press OK.
Note:
If you have selected Alternate audio for analogue channels,
select between:
• Main: Primary audio language or
• SAP: Secondary audio language
Subtitles and languages
Subtitles
Switch subtitles on
To open the Subtitle menu, press SUBTITLE.
You can set subtitles to On, Off or Automatic.
To show subtitles when the broadcasted programme is not in
your language — the language you set for the TV, select
Automatic. Also, this setting will show subtitles when you mute
the sound with .
For analogue channels, subtitles must be made available in Text.
Subtitles for digital channels
There is no need to set subtitles in Text for digital channels.
Digital channels can offer several subtitle languages for a
programme. You can set a preferred primary and secondary
subtitle language. If subtitles in one of these languages are
available, the TV will show them.
29
If none of the preferred subtitle languages are available, you can
select another subtitle language which is available.
To set the primary and secondary subtitle language . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and select Languages > Primary
subtitles language or Secondary subtitles language and press
OK.
3 - Select a language and press OK.
4 - Press , repeatedly if necessary, to close the menu.
To select a subtitle language when none of your preferred
languages are available . . .
1 - Press OPTIONS.
2 - Select Subtitle language and select a language you want
temporarily and press OK.
Subtitles for analogue channels
For analogue channels, you need to make the subtitles available
for each channel manually.
1 - Switch to a channel and press TEXT to open Text.
2 - Enter the page number for subtitles, usually 888.
3 - Press TEXT again, to close Text.
If you select On in the Subtitle menu when watching this
analogue channel, subtitles will be shown if available.
To know if a channel is analogue or digital, switch to the channel
and open Status in the Options menu.
Audio languages
Digital TV channels can broadcast audio with several spoken
languages for a programme. You can set a preferred primary and
secondary audio language. If audio in one of these languages is
available, the TV will switch to this audio.
If none of the preferred audio languages is available, you can
select another audio language which is available.
To set the primary and secondary audio language . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and select Languages > Primary
audio language or Secondary audio language and press OK.
3 - Select a language and press OK.
4 - Press , repeatedly if necessary, to close the menu.
To select an audio language when none of your preferred audio
language is available . . .
1 - Press OPTIONS.
2 - Select Audio language and select an audio language you want
temporarily and press OK.
Audio languages for the hearing and visually impaired
Some digital TV channels broadcast special audio and subtitles
adapted for people who are hearing or visually impaired.
For more information, press Keywords and look up
Universal access.
Menu language
To change the language or the TV menus and messages . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Menu language and
press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Interactive TV
About iTV
With interactive TV, some digital broadcasters combine their
normal TV programme with information or entertainment pages.
On some pages, you can respond to a programme or vote, do
online shopping or pay for a video-on-demand programme.
HbbTV, MHEG, . . .
Broadcasters use various interactive TV systems : HbbTV
(Hybrid Broadcast Broadband TV) or iTV (Interactive TV -
MHEG). Interactive TV is sometimes referred to as Digital Text
or Red button. But each system is distinct.
Visit the broadcaster's Internet website for more information.
What you need
Interactive TV is only available on digital TV channels. To enjoy
the full benefits of Interactive TV, you need a high-speed
(broadband) Internet connection to the TV.
HbbTV
If a TV channel offers HbbTV pages, you must first switch on
HbbTV in the TV settings to view the pages.
1 - Press and select Setup and press OK.
2 - Select TV settings and select General settings > HbbTV and
press OK.
3 - Select On and press OK.
4 - Press , repeatedly if necessary, to close the menu.
If you want to avoid access to HbbTV pages on a specific
channel, you can block the HbbTV pages for this channel only.
1 - Tune to the channel of which you want to block the HbbTV
pages.
2 - Press OPTIONS and select HBB TV on this channel and
press OK.
3 - Select Off and press OK.
Use iTV
Open iTV pages
Most channels that offer HbbTV or iTV invite you to press the
30
key or OK key to open their interactive programme.
Navigate iTV pages
You can use the arrow and colour keys, the number keys and
the key to navigate the iTV pages.
You can use the (Play), (Pause) and (Stop) keys to watch
videos within iTV pages.
Digital Text (UK only)
To open Digital Text, press TEXT. To close, press .
Close iTV pages
Most iTV pages inform you which key to use to close.
To force an iTV page to close, switch to the next TV channel
and switch back.
About interactive TV
With interactive TV, some digital broadcasters combine their
normal TV programme with information or entertainment pages.
Note:
• You cannot download files to your TV with this feature.
• Not all TV programmes, commercials and features include
closed captioning information.
• You cannot respond to the digital content.
Visit the broadcaster's Internet website for more information.
7.2
Channel installation
Update channels
Automatic update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels and stores
new channels. New channels are stored in the All channels list
but also in the New channels list. Empty channels are removed.
If new channels are found or if channels are updated or
removed, a message is shown at TV start up. The TV must be in
standby to automatically update channels.
To switch off the message at start up . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Channel update message >
Off.
To switch off the Automatic channel update . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Automatic channel update >
Off and press OK.
Start an update
To start an update yourself . . .
1 - Press and select Setup and press OK.
2 - Select Search for channels and press OK.
3 - Select Update channels and follow the instructions on
screen. The update may take a few minutes.
In certain countries, the Automatic channel update is done while
watching TV or any moment when the TV is in standby.
Reinstall channels
You can search for and reinstall channels and leave all other TV
settings untouched. Alternatively, you can do a full new TV
installation.
If a child lock code is set, you will need to enter this code before
you can reinstall channels.
Reinstall channels
To reinstall the channels only . . .
1 - Press and select Setup and press OK.
2 - Select Search for channels > Re-install channels and press
OK.
3 - Select the country where you install the TV.
4 - Select Antenna (DVB-T) or Cable (DVB-C). The channel
search may take a few minutes. Follow the instructions on
screen.
Full installation
To redo a full TV installation . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Reinstall TV and
press OK. The installation may take a few minutes. Follow the
instructions on screen.
Factory settings
Factory settings sets the TV back to the original TV settings for
picture and sound. To switch back to the original Factory
settings . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Factory
settings and press OK.
3 - Press OK to confirm.
4 - Press , repeatedly if necessary, to close the menu.
31
Channel list copy
Introduction
Channel list copy is intended for dealers and expert users. In
some countries, Channel list copy is only available for copying
satellite channels.
With Channel list copy, you can copy the channels installed on
one TV onto another Philips TV of the same range. With
Channel list copy, you avoid the time-consuming channel search
by uploading a predefined channel list on a TV. Use a USB flash
drive of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as Q . . . LA
• Both TVs have compatible software versions.
Current version
You can check the current version of the TV software
with Current software info in > Setup > Software settings.
Copy channel list
To copy a channel list . . .
1 - Switch on the TV which has its channels installed. Plug in a
USB memory device.
2 - Press and select Setup and press OK.
3 - Select TV settings > General settings > Channel list copy >
Copy to USB and press OK. To copy the channel list from this
TV, you might be asked to enter the Child lock code you
entered during the installation.
4 - When copying is done, unplug the USB memory device.
Now you can upload the copied channel list onto another
Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or not, you
must use a different way to upload a channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 - Plug in the USB memory device that holds the channel list of
the other TV.
3 - To start the channel list upload, press and
select Setup and press OK.
4 - Select TV settings > General settings > Channel list copy >
Copy to TV and press OK. You might be asked to enter the
Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this setting,
press and select Setup and press OK. Select Search for
channels > Re-install channels and press OK. Press and
later Cancel to leave the Search for channels.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a reinstallation. To
start the reinstallation, press and select Setup and press OK.
Select TV settings > General settings > Reinstall TV > OK.
Select the correct country and skip the Search for channels.
Finish the installation. When done, continue with step 2.
2 - Plug in the USB memory device that holds the channel list of
the other TV.
3 - To start the channel list upload, press and
select Setup and press OK.
4 - Select TV settings > General settings > Channel list copy >
Copy to TV and press OK. You might be asked to enter the
Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
DVB-T or DVB-C
DVB-T or DVB-C reception
If both DVB-T and DVB-C reception is available in your country
and if this TV is ready to receive DVB-T and DVB-C for your
country, you have selected one or the other during the channel
installation.
If you want to change the DVB setting to start a new channel
installation . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Antenna connection >
Antenna (DVB-T) or Cable (DVB-C) and press OK.
4 - Select the DVB setting you want.
5 - Press , repeatedly if necessary, to close the menu.
DVB-C channel installation
For ease of use, all DVB-C settings are set to automatic.
If your DVB-C provider gave you specific DVB-C values, the
network ID or network frequency, enter these values when the
TV asks for them during installation.
It might be necessary to adjust the scanning (full or quick scan)
or enter a specific symbol rate in the Settings menu while
installing. To set a Symbol rate, first set the Symbol rate to
Manual.
Channel number conflicts
In some countries, different TV channels (broadcasters) might
have the same channel number. While installing, the TV shows
the list with channel number conflicts. You need to select which
32
TV channel you want to install on a channel number with
multiple TV channels.
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVB-C input,
you can set up your TV for both DVB-T and DVB-C. Install one
system followed by the other with the necessary settings.
Once each system is installed, you need to switch the antenna
input signal on the Antenna connection on the back of the TV
and set the TV in the appropriate system to view the installed
channels on TV.
To select the DVB-T or DVB-C setting, see above.
DVB settings
Access DVB settings
1 - Press and select Setup and press OK.
2 - Select Search for channels and press OK.
3 - Select Re-install Channels.
4 - Select the country where you install this TV.
5 - Select Cable (DVB-C).
6 - Select Start to search channels, or select Settings for DVB-
C settings.
7 - Press , repeatedly if necessary, to close the menu.
Symbol rate mode
If your cable provider did not give you a specific symbol rate
value to install the TV channels, leave the Symbol rate mode
setting on Automatic.
If you received a specific symbol rate value, select Manual.
However, the value you received could be in the predefined list
of symbol rates already. Select Predefined symbol rates to
check if your value is available automatically.
Symbol rate
With the Symbol rate mode set to Manual, you can enter the
symbol rate value you received from your cable provider. To
enter the value, use the number keys.
Network frequency mode
If you intend to use the fast Quick scan method in Frequency
scan to search for channels, select Automatic. The TV will use 1
of the predefined network frequencies (or HC - homing
channel) as used by most cable providers in your country.
If you received a specific network frequency value to search for
channels, select Manual.
Network frequency
With the Network frequency mode set to Manual, you can
enter the network frequency value received from your cable
provider here. To enter the value, use the number keys.
Frequency scan
Select the method of searching for channels. You can select the
faster Quick scan method and use the predefined settings used
by most cable providers in your country.
If this results in having no channels installed or if some channels
are missing, you can select the extended Full scan method. This
method will take more time to search for and install channels.
Digital channels
If you know your cable provider is not offering digital channels,
you can skip searching for digital channels.
Select Off.
Analogue channels
If you know your cable provider is not offering analogue
channels, you can skip searching for analogue channels. Select
Off.
Free / Scrambled
If you have a subscription and a CAM - Conditional Access
Module for pay TV services, select Free + scrambled. If you did
not subscribe to pay TV channels or services, you can select
Free channels only.
For more information, press Keywords and look up CAM -
Conditional Access Module.
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you have your own antenna, you can reposition the antenna
to try and improve the reception.
To check the reception quality of a digital channel . . .
1 - Tune to the channel.
2 - Press and select Setup and press OK.
3 - Select Channel settings > Channel installation > Digital :
reception test and press OK.
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
quality of this frequency again, select Search and press OK.
To enter a specific digital frequency yourself, use the remote
33
control digit keys. Alternatively, select the frequency, position the
arrows on a number with and and change the number with
and . To check the frequency, select Search and press OK.
If you use DVB-C to receive channels, the option Symbol rate
mode is available. For Symbol rate mode, select Automatic,
unless your cable provider gave you a specific symbol rate value.
To enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Channel installation > Analogue :
Manual installation and press OK.
• System
To set up the TV system, select System and press OK.
Select your country or the part of the world where you are
now.
• Search channel
To find a channel, select Search channel and press OK. Select
Search and press OK. You can also enter a frequency yourself. If
the reception is poor, press Search again. If you want to store
the channel, select Done and press OK.
• Fine tune
To fine tune a channel, select Fine tune and press OK. You can
fine tune the channel with or .
If you want to store the channel found, select Done and press
OK.
• Store current channel / Store as new channel
You can store the channel on the current channel number or as
a new channel number.
Select Store current channel or Store as new channel.
You can redo these steps until you have found all available
analogue TV channels.
34
8
Satellite channels
8.1
Watching satellite channels
To watch satellite channels . . .
Press and select Satellite and press OK. The TV tunes to the
satellite channel you last watched.
Change channel
To change channels, press + or . The TV will tune to
the next channel in the selected channel list. If you know the
channel number, you can use the number keys on the remote
control. To change back to the previously tuned channel, press
.
You can also tune to a channel directly from the Satellite
channel list.
8.2
Satellite channel list
About the channel list
When the satellite installation is completed, all satellite channels
are put in the channel list. You can view the list of all channels or
filter the list down to show the favourite channels only or the
radio stations only. Or, after a channel update, you can find the
newly added channels in the list of new channels.
From any list, you can directly tune to a channel. The list you
select in the channel list, determines the channels you tune to
with the + and keys.
You can only reorder channels in the list of favourite channels.
Select a list filter
The list you select in the channel list, determines the channels
you tune to with the + and keys.
To select a channel list . . .
1 - Press and select Satellite and press OK.
2 - Press LIST to open the channel list. The list appears with
the current channel selected.
3 - Navigate up to select All or a list filter.
The lists Radio or New are only shown when radio stations are
available or new channels were found with a channel update.
Tune from the channel list
To tune to a channel from the channel list . . .
1 - In the channel list, select or in the menu bar to select
the TV or Satellite channel list.
2 - Select a list.
3 - Select a channel in any of the lists and press OK. The TV will
tune to the selected channel.
Channel list options
To view the channel list options on the current channel . . .
1 - With the All channels list on screen, select a channel and
press OPTIONS.
2 - Select the option you want and press OK.
Available options for satellite channels . . .
• Satellite
Filter the channel list to only show the channels of a specific
satellite or show the channels of all satellites.
• Free/Scrambled
Filter the channel list to only show the free-to-air channels, only
the scrambled channels or both. Scrambled channels are marked
with a key .
• Lock channel
You can lock a channel. First select a channel in the list,
press OPTIONS and select Lock channel. You will have to
enter the 4-digit child lock code. A locked channel is marked
with a lock .
• Unlock channel
To unlock a locked channel. Select a locked channel in the list,
press OPTIONS and and select Unlock channel. You will
have to enter the 4-digit child lock code.
Channel list copy
Channel list copy is intended for dealers and expert users. With
Channel list copy, you can copy the channels installed on one TV
onto another Philips TV of the same range. Channel list copy will
copy both terrestrial and satellite channels.
For more information, press Keywords and look up Channel
list copy.
8.3
Favourite satellite channels
35
Favourite channels
You can mark channels as favourite channels. Your favourite
satellite channels are collected in the Favourites list of the
satellite channel list.
Watching favourite channels
Set up a favourite channel list to easily switch between the
channels you want to watch.
To only switch between your favourite channels
with + and -, select the Favourites list in the channel list
and close the channel list again.
There are two favourite lists, one for TV channels and one for
satellite channels.
Set up your favourites list
To compose a list of your favourite channels . . .
1 - While watching a channel, press LIST to open the
channel list.
2 - In the menu bar, select for satellite channels.
3 - Select the Favourites list.
4 - The TV will ask you to start adding channels immediately.
Press OK. To avoid a lot of reordering later, select the channels
in the order you want them in the list.
5 - To add a channel to the Favourites list, select the channel
and press OK. You can then select another channel to add as a
favourite.
6 - To finish, press .
Add or remove favourite channels
To add or remove favourites list . . .
1 - While watching a TV channel, press LIST to open the
channel list.
2 - Select All to view all channels.
3 - Select the channel, and press to mark as favourite.
4 - The selected channel is marked with a .
5 - To finish, press . The channels are added to the Favourites
list.
To remove a channel from the favourites list, press to
unmark as favourite.
Reorder favourite channels
You can only reorder channels in the Favourites list.
1 - In the channel list Favourites, highlight the channel you want
to reposition.
2 - Press .
3 - Select the channel to reorder and press OK.
4 - Press the Navigation buttons to move the highlighted
channel to another location and press OK.
5 - Once complete, press EXIT to exit from the Favourite
channel list.
8.4
Lock satellite channels
Lock a channel
You can lock a channel to prevent children from watching it. To
watch a locked channel you need to enter the Child lock code.
You cannot lock programmes from connected devices.
To lock a channel . . .
1 - While watching a TV channel, press LIST to
open the channel list.
2 - In any list, select the channel you want to lock.
3 - Press OPTIONS and select Lock channel. In a channel
list, a locked channel is marked with a lock .
To unlock a channel, select the locked channel in the channel list
and press OPTIONS, select Unlock channel.
Use an age rating
To prevent children from watching a programme not suitable for
their age, you can use an age rating.
Some digital broadcasters have age rated their programmes.
When the age rating of a programme is equal to or higher than
the age you have set as age rating for your child, the programme
will be locked.
To watch a locked programme you must enter the child lock
code. The parental age rating is set for all channels.
To set an age rating . . .
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Child lock > Parental rating and
press OK
3 - Enter a 4-digit Child lock code and confirm. Now you can set
an age rating.
4 - Set the age and press OK.
5 - Press , repeatedly if necessary, to close the menu.
To switch off the parental age rating, select None as age setting.
The TV will ask for the code to unlock the programme. For
some broadcasters / operators, the TV only locks programmes
with a higher rating.
36
Child lock code
You can set or change the Child lock code.
To set the lock code or to change the current code . . .
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Child lock > Change code and
press OK.
3 - If a code is set already, enter the current Child lock code and
then enter the new code twice.
The new code is set.
Forgotten your Child lock code?
If you forgot your code, you can override the current code and
enter a new code.
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Child lock > Change code and
press OK.
3 - Enter the overriding code 8888.
4 - Now enter a new Child lock code and enter it again to
confirm.
8.5
Satellite installation
Installing satellites
About installing satellites
This TV has a built-in satellite DVB-S/DVB-S2 receiver. Connect
the cable from your satellite dish directly to the TV. Use a
coaxial cable fit for connecting a satellite antenna dish. Make sure
your satellite dish is perfectly aligned before you start the
installation.
Up to 4 satellites
You can install up to 4 satellites (4 LNBs) on this TV. Select the
exact number of satellites you wish to install at the start of the
installation. This will speed up the installation.
Unicable
You can use a Unicable system to connect the antenna dish to
the TV. Select if you are installing satellites for a Unicable system,
for 1 or for 2 satellites at the start of the installation.
MDU - Multi-Dwelling-Unit
The satellite receiver of this TV supports MDU on the Astra
satellites and for Digiturk on the Eutelsat satellite. MDU on
Türksat is not supported.
Installing
You can install your satellites during the initial TV setup. The
satellite installation follows the TV channel installation. If you only
watch satellite channels, you can skip the TV channel installation.
You can always start a new satellite installation from the Setup
menu.
To install satellite channels . . .
1 - Press and select Setup and press OK.
2 - Select Search for satellite and press OK.
3 - Select Install satellites and press OK.
4 - The TV shows the current installation setting. If the current
setting corresponds with the satellite installation you want, you
can start searching for satellites. Select Search and press OK. Go
to step 5. If the current setting is not the setting you want, select
Settings and press OK. Go to step 4b.
4b - In the Settings menu, select the exact number of satellites
you want to install. Or, if you use a Unicable setup, select
Unicable for 1 satellite or Unicable for 2 satellites according
the number of satellites you want to install for Unicable. Select
the setting you want and press OK.
4c - If the exact number of satellites is set or you completed the
Unicable settings, select Search and press OK.
5 - The TV will search for satellites available on the alignment of
your antenna dish. This may take a few minutes. If a satellite is
found, its name and reception strength are shown on screen.
6 - If a channel package is available for any of the satellites found,
you can select the package you want.
7 - To install the channels of the satellites found, select Install
and press OK. The TV shows the number of channels and radio
stations found.
8 - To store the satellite settings, all satellite channels and
satellite radio stations, select Finish and press OK.
Channel packages
About channel packages
Satellites can offer channel packages that bundle free channels
(free-to-air) and offer a sorting that suits a country. Some
satellites offer subscription packages - a collection of channels
you pay for.
If you choose a subscription package, the TV might ask you to
select a Quick or Full installation.
Select Satellite operator channels only to install the channels of
the package only or select All satellite channels to install the
package and all other available channels too. We recommend a
Quick installation for subscription packages. If you have
additional satellites that are not part of your subscription
package, we recommend a Full installation. All installed channels
are put in the channels list All.
37
Update channel packages
With Update channel package, you can bring back satellite
channels that were in the satellite channel list before but are
now missing. The missing channels were repositioned on the
transponder by the satellite operator. The TV must be updated
with the latest version of the channel package.
To download the latest version of the channel package . . .
1 - Go to the Philips support website www.philips.com/support
and enter the type number of your TV.
2 - Click on Software and drivers and look for the file :
PredefinedSortingList
3 - Download the file on your computer and copy the file on
the root directory of a USB flash drive, not in a folder (if
necessary, unzip the file first).
4 - Plug the USB flash drive into the TV and press and
select Setup and press OK.
5 - Select Satellite settings > Channel installation > Update
channel package and press OK.
6 - The TV will copy the file and ask you to start a channel
update immediately. Select Yes and press OK. This may take a
few minutes. If you want to postpone the channel update, you
can do it later with Setup > Search for satellite > Update
channels.
7 - After the channel update is done, the missing channels
should be back at their former position in the satellite channel
list.
Unicable setup
The Unicable system
You can use a Unicable system to connect the antenna dish to
the TV. A Unicable system uses one cable to connect the
satellite dish to all satellite receivers in its system. Unicable is
typically used in apartment buildings. If you use a Unicable
system, the TV will ask you to assign a user band number and
corresponding frequency during the installation. You can install 1
or 2 satellites with Unicable on this TV.
If you notice some missing channels after a Unicable installation,
another installation might have been done at the same moment
on the Unicable system. Do the installation again to install the
missing channels.
User band number
In a Unicable system, each connected satellite receiver must be
numbered (e.g. 0, 1, 2 or 3 etc.).
You can find the available user bands and their number on the
Unicable switchbox. User band is sometimes shortened as UB.
There are Unicable switchboxes that offer 4 or 8 user bands. If
you select Unicable in the settings, the TV will ask you to assign
the unique user band number for its built-in satellite receiver. A
satellite receiver cannot have the same user band number as
another satellite receiver in the Unicable system.
User band frequency
Next to the unique user band number, the built-in satellite
receiver needs the frequency of the selected user band number.
These frequencies are mostly shown next to the user band
number on a Unicable switchbox.
Add a satellite
You can add an additional satellite to your current satellite
installation. The installed satellites and their channels remain
untouched. However, some satellite operators do not allow
adding a satellite.
The additional satellite should be seen as an extra, it is not your
main satellite subscription or not the main satellite of which you
use its channel package. Typically, you would add a 4th satellite
when you have 3 satellites already installed. If you have 4
satellites installed, you might consider removing one first to be
able to add a new satellite.
Settings
If you currently have only 1 or 2 satellites installed, the current
installation settings might not allow adding an extra satellite. If
you need to change the installation settings, you must redo the
complete satellite installation. You cannot use Add satellite if a
change of settings is needed.
To add a satellite . . .
1 - Press and select Setup and press OK.
2 - Select Search for satellite and press OK.
3 - Select Add satellite and press OK. The current satellites are
shown.
4 - Select Add and press OK. The TV will search for new
satellites.
5 - If the TV has found one or more satellites, select Install and
press OK. The TV installs the channels of the found satellites.
6 - To store the channels and radio stations, select Finish and
press OK.
38
Remove a satellite
You can remove one or more satellites from your current
satellite installation. You remove the satellite and its channels.
However, some satellite operators do not allow removing a
satellite.
To remove satellites . . .
1 - Press and select Setup and press OK.
2 - Select Search for satellite and press OK.
3 - Select Remove satellite and press OK. The current satellites
are shown.
4 - Use the arrows keys to select the satellite you want to
remove.
5 - Press OK to mark a satellite to remove. Press OK again to
unmark.
6 - Select Remove, press OK and confirm. The satellites are
removed.
7 - Select Exit and press OK to close Remove satellite.
Reorder and rename channels
You can reorder and rename satellite channels.
Reorder
You can only reorder channels in the Favourites list. For more
information on Reordering satellite channels, press Keywords
and look up Satellite, reorder channels.
Rename channels
You can rename channels in the channel list.
1 - Select the channel you want to rename in one of the channel
lists - All, Favourites, Radio or New.
2 - Press Rename. You can enter text with the remote
control keyboard or open the on-screen keyboard.
With the remote control keyboard
To delete a character, position the cursor behind the character
and press .
To enter a character, press the character on the keyboard.
When you are ready, press OK to select Done. Press OK again
to finish renaming.
For more information on entering text, press Keywords and
look up Remote control, keyboard.
With the on-screen keyboard
To open the on-screen keyboard, place the cursor in the name
text field and press OK.
To delete the character in front of the cursor, press
Backspace.
To enter a character, select the character with the arrow keys
and press OK.
To select uppercase letters, press .
To select numbers or special characters, press .
When you are ready, press to close the on-screen keyboard.
To finish renaming, select Done and press OK.
Update satellite channels
Once a day, at 6 AM, the TV automatically updates the satellite
channels. A channel update looks for new channels and adds
them to the channel list. No longer available channels are
removed and if a provider reorders its channel package, the
channel list of the TV will be updated. The TV must be on
standby to automatically update the satellite channels.
Alternatively, you can do a channel update yourself at any
moment.
New channels, found with the channel update, are marked with
the letter N and collected in the channel list New. New
channels are also added in the All channel list. New channels
stay in the channel list New as long as you do not tune to them
or mark them as a favourite.
Switch off the automatic channel update
You can completely switch off the TV at night to avoid a channel
update. Alternatively, you can switch off the automatic update in
the setup menu.
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Channel installation > Automatic
channel update and select Off.
Switch off the update for a specific satellite
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Channel installation > Automatic
update option.
3 - With the arrow keys, select the satellite you do not wish to
update. Press OK to unmark the satellite.
4 - Select Done and press OK to close the menu.
The TV will not update the channels from the satellite you
unmarked.
Start an update yourself
1 - Press and select Setup and press OK.
2 - Select Search for satellite and press OK.
3 - Select Update channels and press OK.
4 - If you want to check which satellites are set for updating,
select Settings and press OK.
5 - With the arrow keys, mark or unmark the satellites for
updating. Select Done and press OK.
6 - Select Update and press OK. The update may take a few
minutes.
7 - Select Finish and press OK.
Languages and audio
Preferred languages and subtitles
Satellite channels can hold different audio languages, subtitle
languages or Text languages. You can set the TV to
automatically switch to the language, subtitle language or Text
language you prefer, if this language is available on the channel or
Text pages.
To set the your preferred language . . .
39
1 - Press and select Setup and press OK.
2 - Select Satellite settings and press OK.
3 - Select Languages and press OK. Select the setting you want.
4 - Press , repeatedly if necessary, to close the menu.
Hearing impaired audio
Some digital TV channels broadcast special audio and subtitles
adapted for hearing impaired people.
With Hearing impaired switched on, the TV automatically
switches to the adapted audio and subtitles, if available. Before
you can switch on Hearing impaired, you have to switch on
Universal access.
Switch on
To switch on Hearing impaired, press OPTIONS, select
Universal access and press OK.Select Hearing impaired, select
On and press OK.
To check whether a hearing impaired audio language is available,
press OPTIONS, select Audio language and look for an
audio language marked with a .
If Universal access does not appear in the Options menu, switch
on Universal access in Setup.
For more information, press Keywords and look up
Universal access.
Audio description
Switch on
Digital TV channels can broadcast special audio commentary
describing what is happening on screen. To be able to set the
Audio description audio and effects, you have to switch on
Audio description first. Also, before you can switch on Audio
description, you have to switch on Universal access.
Audio description
With Audio description, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available) . . .
1 - With Universal access switched on, press OPTIONS
and select the Options tab in the menu bar.
2 - Select Audio description and press OK.
3 - Select On and press OK.
You can check if an audio commentary is available.
In the Options menu, select Audio language and look for an
audio language marked with a .
Speakers / Headphones
You can select where you want to hear the audio commentary.
On the TV speakers only, on the headphones only or on both.
To set Speakers / Headphones . . .
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Languages > Audio description >
Speakers / Headphones and press OK.
3 - Select Speakers, Headphones or Speakers + headphones
and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Mixed volume
You can mix the volume of the normal audio with the audio
commentary.
To mix the volume . . .
1 - Press OPTIONS and select the Options tab in the menu
bar.
2 - Select Universal access > Mixed volume and press OK.
3 - Use the arrows up and down to set the slider bar.
4 - Press OK to confirm.
Audio effect
Some audio commentary can hold extra audio effects, like
stereo or fading sound.
To switch on Audio effects (if available) . . .
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Languages > Audio description >
Audio effects and press OK.
3 - Select On or Off and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Speech
The audio commentary can also hold subtitles for the words
which are spoken.
To switch on these subtitles (if available) . . .
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Languages > Audio description >
Speech and press OK.
3 - Select Descriptive (audio) or Subtitles and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Manual installation
Manual installation is intended for expert users.
You can use Manual installation to quickly add new channels
from a satellite transponder. You need to know the frequency
and polarization of the transponder. The TV will install all
channels of that transponder. If the transponder was installed
before, all its channels - the former and the new ones - are
moved to the end of the channel list All.
You cannot use Manual installation if you need to change the
number of satellites. If this is needed, you have to do a complete
installation with Install satellites.
40
To install a transponder . . .
1 - Press and select Setup and press OK.
2 - Select Satellite settings > Channel installation > Manual
installation and press OK.
3 - If you have more than 1 satellite installed, select the
satellite/LNB for which you want to add channels.
4 - Set the Polarization you need. If you set the Symbol rate
mode to Manual, you can enter the symbol rate in Symbol rate
manually. Enter the Frequency and start searching for the
transponder.
5 - If a transponder is found, select Store and press OK to store
the new transponder on the selected LNB.
6 - Select Exit to leave the manual installation.
8.6
Problems with satellites
The TV cannot find the satellites I want or the TV installs the
same satellite twice
• Make sure that the correct number of satellites is set in
Settings at the start of the installation. You can set the TV to
search for One, Two or 3/4 satellites.
A dual head LNB cannot find a second satellite
• If the TV finds one satellite but cannot find a second one, turn
the dish a few degrees. Align the dish to get the strongest signal
on the first satellite. Check the signal strength indicator of the
first satellite on screen. With the first satellite set at the strongest
signal, select Search again to find the second satellite.• Make
sure the settings are set to Two satellites.
Changing the installation settings did not solve my problem
• All settings, satellites and channels are only stored at the end
of the installation when you finish.
All satellite channels are gone
• If you use a Unicable system, make sure you assigned a unique
user band number to the satellite receiver in the Unicable
settings. It might be that another satellite receiver is using the
same user band number.
Some satellite channels seem to have disappeared from the
channel list
• If some channels seem to be gone or displaced, the
broadcaster might have changed the transponder location of
these channels. To restore the channel positions in the channel
list, you can try an update of the channel package.
I cannot remove a satellite
• Subscription packages do not allow removing a satellite. To
remove the satellite, you have to do a complete installation again
and select another package.
Sometimes the reception is poor
• Check if the satellite dish is solidly mounted. Strong winds can
move the dish.
• Snow and rain can degrade the reception.
41
9
Home menu
From the Home menu, you can start any activity you can do
with the TV.
Open the Home menu to start watching TV or start watching a
disc on your Home Theatre System. Also in the Home menu,
you can open Smart TV to surf the Internet, start Skype or open
Help if you need information on using the TV.
Open the Home menu
1 - To open the Home menu, press .
2 - Select an activity using the arrow keys and press OK to start
the activity.
3 - To close the Home menu without changing the current
activity, press .
• Help
Select Help and press OK to open the on screen Help. You can
look up a topic in an alphabetical list.
• Setup
Select Setup to install channels or adjust all TV settings.
• Satellite
Select Satellite and press OK to watch satellite channels.
• TV
Select TV and press OK to watch TV channels.
• Smart TV
Select Smart TV and press OK to open the Smart TV start
page.
• Source
Select Source and select a connected device in the list
underneath the icon. Press OK to switch to the selected device.
• TV guide
Select TV guide and press OK to open a list of the current and
scheduled TV programmes of your channels.
• Recordings
Select Recordings and press OK to open the list of your
recordings.
• Skype
Select Skype to make video calls for free.
• Demo
Select Demo to watch demonstration videos.
42
10
TV guide
10.1
What you need
With the TV guide you can view a list of the current and
scheduled TV programmes of your channels. Depending on
where the TV guide information (data) is coming from, analogue
and digital channels or only digital channels are shown. Not all
channels offer TV guide information.
The TV can collect TV guide information for the channels that
are installed on the TV (e.g the channels you watch with Watch
TV). The TV cannot collect the TV guide information for
channels viewed from a digital receiver.
10.2
Using the TV guide
Open the TV guide
To open the TV guide, press TV GUIDE.
Press TV GUIDE again to close.
The first time you open the TV guide, the TV scans all TV
channels for programme information. This may take several
minutes. TV guide data is stored in the TV.
Tune to a programme
Switch to a programme
From the TV guide, you can switch to a current programme.
To select a programme, use the arrow keys to highlight the
programme name.
Navigate to the right to view programmes scheduled later that
day.
To switch to the programme (channel), select the programme
and press OK.
View programme details
To call up the details of the selected programme,
press INFO.
Change day
The TV guide can show scheduled programmes for the
upcoming days (maximum up to 8 days).
If the TV guide information comes from the broadcaster, you
can press + to view the schedule of one of the next days.
Press to go back to the previous day.
Alternatively, you can press OPTIONS and select Change
day.
Select Previous day, Today or Next day and press OK, to select
the day of the schedule.
Set a reminder
You can set reminders that alert you of the start of a
programme with a message on screen.
• To set a reminder, select the programme in the schedule and
press for Set reminder. The programme is marked with a
clock.
• To cancel the reminder, press the for Clear reminder.
• To view a list of all reminders you have set,
press OPTIONS, and select All reminders.
Search by genre
If the information is available, you can look up scheduled
programmes by genre like movies, sports, etc.
To search for programmes by genre, press OPTIONS and
select Search by genre.
Select a genre and press OK. A list with the found
programmes appears.
10.3
Recordings
From the TV guide, you can instantly record or schedule a
recording of a TV programme. To store the recordings, connect
a USB Hard Drive to the TV.
For more information on Recording, press Keywords and
look up Recording.
43
11
Sources
11.1
Sources list
In the list of connections - the Source menu - you can find the
devices connected to the TV. From this Source menu, you can
switch to a device.
Sources menu
To open the Sources menu, press SOURCES.
To switch to a connected device, select the device with the
arrows (left) or (right) and press OK.
For some devices (HDMI-CEC devices), you can select an
activity directly in the list underneath the device icon.
Select the device and select an activity and press OK.
To close the Source menu without switching to a device,
press SOURCES again.
Automatic detection
When you connect a new device to the TV, the device is
detected automatically and put in the Sources menu. The device
is shown as an icon (the device type) and has a name. If the
device type does not correspond with the device, e.g. the TV
says it is a player but it is not, you can change the type.
To change the type of the device, press Change type and
select a type that fits the device and press OK.
If the name does not fit the device or you want to give the
device a name of your own, press Rename. Use the remote
control keypad to enter a new name.
An appropriate device type helps you in using the device. The
device type determines picture and sound styles, resolution
values, specific settings or the position within the Sources menu.
When you connect a new device to the TV, the icon of the
device jumps to the front of the Sources menu.
If the TV does not detect the device automatically, select the
connection you used to connected the device and adjust the
Device type and name.
Original name and icon
To restore the device icon to its original name and type icon,
press OPTIONS. Select Original name and icon and
press OK.
Scan connections
To rescan all TV connections and update the Sources menu,
press OPTIONS. select Scan connections and press OK.
11.2
From standby
With the TV in standby, you can switch on a connected device
with your TV remote control.
Play
To switch on both disc player and TV from standby and start
playing the disc or programme immediately, press (play) on
the TV remote control.
The device should be connected with an HDMI cable and both
TV and device must have HDMI CEC switched on.
Home Theatre System
You can switch on your Home Theatre System to listen to an
audio disc or a radio channel and leave the TV in standby.
To only switch on the HTS, with the TV in standby,
press SOURCES on the TV remote control.
11.3
EasyLink
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC to communicate with
the connected devices. Devices must support HDMI CEC and
must be connected with an HDMI connection.
For more information, press Keywords and look
up EasyLink.
44
12
Timers and clock
12.1
Sleeptimer
With the sleep timer, you can set the TV to switch to standby
automatically after a preset time.
To set the sleep timer . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Sleep timer.
With the slider bar you can set the time to up to 180 minutes in
increments of 5 minutes. If set to 0 mins, the sleep timer is
switched off. You can always switch off your TV earlier or reset
the time during the countdown.
3 - Press , repeatedly if necessary, to close the menu.
12.2
Clock
To know what time it is, press TV GUIDE to find the time in
the TV guide.
In some countries, digital broadcasts do not send UTC -
Coordinated Universal Time information. The daylight saving
change might be ignored and the TV might show an incorrect
time.
To correct the TV clock . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Clock > Auto
clock mode, and select Country dependent.
3 - Select Daylight saving and select the appropriate setting.
4 - Press , repeatedly if necessary, to close the menu.
To set the TV clock manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Clock > Auto
clock mode, and select Manual.
3 - Select Date and Time to adjust.
4 - Press , repeatedly if necessary, to close the menu.
12.3
Switch off timer
If you do not press a key on the remote control during a 4 hour
period, or if the TV receives no input signal nor remote control
commands for 10 minutes, the TV switches off automatically to
save energy.
If you use the TV as a monitor or use a digital receiver to watch
TV (a Set-top box - STB) and you do not use the remote
control of the TV, you should deactivate the automatic switch
off.
To deactivate the Switch off timer . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Switch off timer
and set the slider bar to Off.
3 - Press , repeatedly if necessary, to close the menu.
For more information on environmentally friendly TV settings,
press Keywords and look up Eco settings.
45
13
3D
13.1
What you need
For Active 3D sets
This is an Active 3D TV. On this TV, you can watch 3D
programmes and movies in full High Definition resolution with
Active 3D.
To watch 3D you need to :
• Tune to a TV channel that broadcasts programmes in 3D.
• Rent a movie in 3D from an online video store with Smart TV.
• Watch a movie in 3D from a 3D Blu-ray Disc, a USB device or
computer.
Also, to watch 3D on this TV, you will need one of these types
of Philips Active 3D glasses. . .
• PTA507
• PTA508
• PTA509
• PTA517
• PTA518
• PTA519
13.2
The 3D glasses
For Active 3D sets
Overview
1 - On or off switch
2 - Player 1 or player 2 selection
3 - Receiver lens
4 - Battery compartment
When you unpack the 3D glasses, also remove the small plastic
foil from the battery compartment that prevents the battery
from running empty.
Switch on and off
Switch on
When a 3D programme is shown on screen, press on the 3D
glasses and put them on. The glasses need some seconds to
adjust to the 3D signal from the 3D transmitter on the TV. At
first use, this may take up to 15 seconds.
Battery level
You can check the battery level when you switch on the 3D
glasses.
• If the LED light blinks green, you can use the glasses for 4
hours or more.
• If the LED light blinks orange, you can use the glasses for at
least 2 hours but less than 4.
• If the LED light blinks red, the battery is almost empty and less
than 2 hours of 3D watching remain.
Switch off
To switch off the 3D glasses, press . The LED light blinks red 4
times. When the 3D glasses do not receive 3D signals for 2
minutes, the glasses switch off automatically.
3D transmitter
Make sure the receiver lens in the centre of the glasses can
receive the 3D signals. Also, clear objects away from the 3D
transmitter on the TV.
1 - 3D transmitter on the TV
2 - 3D receiver on the 3D glasses
Two-player gaming
You can use these glasses to play two-player games. Two players
can watch the same TV but see two different screens to play a
game.
To switch the glasses to watch the Player 1 or Player 2 screen,
switch on the glasses and then press the Player 1/2 key.
• If the LED light is orange and lits continuously for 2 seconds,
the glasses are set for player 1.
• If the LED light is orange and blinks, the glasses are set for
player 2.
For more information, press Keywords and look up Two-
player gaming.
Replacing the batteries
To replace the battery of the 3D glasses PTA508, unscrew the
small battery lid and replace the battery: type CR2032 (3V).
Make sure the + side of the battery is visible. Replace the lid and
fix it with the screw.
To replace the battery of the 3D glasses PTA509, PTA519,
press the small knob on the battery lid and slide the lid up to
open. Replace the battery: type CR2032 (3V). Make sure the +
side of the battery is visible. Replace the lid and slide it down
until it clicks.
Warning
• Do not ingest battery, chemical burn hazard.
• This product contains a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause severe internal
burns in just two hours and can lead to death.
46
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using
the product and keep it away from children.
• If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical attention.
• Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type.
13.3
Care of the 3D glasses
• Do not use cleaning chemicals containing alcohol, solvent,
surfactant, or wax, benzene, thinner, mosquito repellent or
lubricant. Using these chemicals can cause discoloration or
cracks.
• Do not expose the 3D glasses to direct sunlight, heat, fire or
water. This may result in a product malfunction or fire.
• Do not drop, bend or apply force to the lenses of the 3D
glasses.
• Use a clean soft cloth (microfiber or cotton flannel) to clean
the lenses to avoid scratching them. Never spray cleaner directly
onto the 3D glasses. This may damage the electronics (for
Active 3D glasses).
13.4
Watch 3D
To experience the best 3D effect while you watch 3D
programmes:
• Sit at a distance that is at least three times the width (w) of
the TV screen.
• Do not sit more than 6m away.
3D switching
The first time a 3D signal is detected, you can set your
preference on how to start 3D in the future.
• To switch to 3D automatically, select Automatic.
• To show a notification first, select Notification only.
• To never switch to 3D, select Never.
You can still change this preference in > Setup > TV settings
> 3D > Switch to 3D.
Start 3D
When the TV switches to 3D or when a notification is shown
that 3D is available, put on your 3D glasses.
If the TV cannot detect the 3D signal (the 3D signal tag is
missing), the 3D programme is shown as a double image on
screen. To switch to 3D, adjust the 3D settings and select Side
by side or Top / bottom according to the double image
positions.
1 - Press .
2 - Select 3D settings > 3D - Side by side or 3D - Top /
bottom, then press OK.
Stop 3D
To stop watching 3D, press , select 3D settings and select 2D.
3D is switched to 2D when you switch to another channel or
connected device.
2D to 3D conversion
You can convert any 2D programme to watch it in 3D.
1 - Press .
2 - Select 3D settings > 2D to 3D conversion.
Adjust the 3D depth
1 - Press and select Setup, then press OK .
2 - Select TV settings > 3D > 3D effect.
3 - Select Off, or On.
4 - Press , repeatedly if necessary, to close the menu.
Switch off 2D to 3D conversion
1 - Press .
2 - Select 3D settings > 2D, then press OK.
13.5
Optimal 3D viewing
For an optimal 3D viewing experience, we recommend that you:
• sit at least 3 times the height of the TV screen away from the
TV, but no further than 6 meters away.
• avoid fluorescent lighting (such as TL lighting or certain energy
saving light bulbs which operate on a low frequency) and direct
sunlight as they may interfere with the 3D experience.
13.6
Health warning
• Watching 3D is not recommended for children under the age
of six.
• If you or your family have a history of epilepsy or
photosensitive seizures, consult a medical professional before
exposing yourself to flashing light sources, rapid image sequences
or 3D viewing.
47
• If you experience any discomfort, stop watching 3D and do
not immediately engage in any potentially hazardous activity (for
example driving a car) until your symptoms have disappeared. If
symptoms persist, do not resume watching 3D without
consulting a medical professional first.
• To avoid discomfort such as dizziness, headache or
disorientation, we recommend not watching 3D for extended
periods of time.
• Do not use the 3D glasses for any purpose other than
watching 3D TV.
• If you normally wear corrective glasses or use contact lenses,
wear the 3D glasses together with these glasses or lenses.
• Keep the glasses away from small children to avoid the
swallowing of small parts or batteries.
• Parents should monitor their children during 3D viewing and
ensure they do not experience any discomfort as mentioned
above. Watching 3D is not recommended for children under six
years of age as their visual system is not fully developed yet.
• Avoid the use of the 3D glasses in case of eye infection or
other diseases transmitted by contact (e.g. conjunctivitis, head
lice, etc.). Only start using the 3D glasses again when the
infection has disappeared completely.
48
14
Games
14.1
Play a game
With a game console connected to the TV, you can play games
on TV.
For more information on connecting a game console, press
Keywords and look up Game console, connect.
Start a game
1 - Press SOURCES, select the game console and press OK.
2 - On the game console, start the game and select the multi or
two-player mode.
Ideal game setting
For some games, where speed and precision is needed, set the
TV to the ideal Game setting before you start playing.
If your game console is added as a Game type of device in the
Sources menu (list of connections), the TV is set to the ideal
Game setting automatically.
If the type of your game console is set as Player and used as a
disc player most of the time, leave the device type set to Player.
To set the TV to the ideal setting manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Activity
style and press OK.
3 - Select Game and press OK.
4 - Press , repeatedly if necessary, to close the
menu. Remember to set Activity Style setting back to TV when
you stop playing the game.
14.2
Two-player games
For Active 3D sets
About two-player gaming
If you play a multi-player game with split screens, you can set the
TV to show each screen as a full screen. Each player sees only
his part of the game, full screen. The TV uses 3D technology to
show both screens.
What you need
To play a two-player game with this TV, you need 2 active 3D
glasses - Philips PTA507, PTA508, PTA509, PTA517, PTA518 or
PTA519.
Also, the game console must be connected with HDMI.
Play a two-player game
To start a two-player game . . .
1 - Press SOURCES, select the game console and press OK.
2 - On the game console, start the game and select the multi or
two-player mode. Select the mode for split screen viewing.
3 - On the TV, press , select 2 player gaming and press OK.
4 - Select the format in which the split screen game is shown on
screen, Side by side or Top / bottom and press OK. The TV
shows the 2 screens as full screens.
To watch the 2 different screens, put on the 3D glasses.
To switch the glasses to watch the Player 1 screen or Player 2
screen, press the Player 1/2 selection key on the glasses.
In and out of split screen view
In two-player split screen view, you can switch back and forth
from split screen to combined view, to be able to read the game
menu or game scores.
To switch views back and forth, press OK on the remote
control of the TV.
Stop a Two-player game
To stop the two-player split screen view, press and select
another activity.
49
15
Your photos, videos
and music
15.1
From a USB connection or
network computer
What you need
You can view your photos or play your music and videos from a
connected USB flash drive or USB Hard Drive. If you have a
computer in your home network, you can view and play your
files from your computer on the TV.
From a USB device
With the TV switched on, plug in a USB flash drive or USB Hard
Drive to one of the USB connections. The TV detects the
device and lists your files.
If the list does not appear automatically, press SOURCES,
select Browse USB and press OK.
Warning
If you try to pause or record a programme with a USB Hard
Drive connected, the TV will ask you to format the USB Hard
Drive. This formatting will delete all current files on the USB
Hard Drive.
From a computer
If the TV and the computer are in the same network, the TV can
browse and play files stored on your computer.
On your computer, you need to install media server software
like Twonky™ to share your files with the TV. The TV shows
your files and folders as they are organised on your computer.
To browse the files on your computer, press SOURCES,
select Browse network and press OK.
Menu bar and sorting
With a USB device connected, the TV sorts the files by type.
Navigate to the menu bar and select the type of file you are
looking for.
If you browse files from a computer, you can only browse the
files and folders as they are organized on the computer.
The menu bar
Navigate to the menu bar and select the type of file you want to
watch or play.
Select Photos, Music or Videos. Alternatively, you
can open the Folders view and browse your folders to look
for a file.
Sorting
To browse your photos by date, month, year or alphabetically
by name, press Sort.
To browse your music by album, artist, genre or alphabetically
by name, press Sort.
Videos are sorted alphabetically.
View photos
To view photos, select Photos in the menu bar, select a
photo thumbnail and press OK.
If there are several photos in the same folder, select a photo and
press Slide show to start a slide show of all photos in this
folder.
To jump to the next or previous photo, press + or -.
To stop the slide show or close the photo, press LIST or
(Stop).
You can play music with a slide show.
Start the slide show after you started the music.
1 - Select a song or a folder with songs and press OK.
2 - Press LIST and select Photos.
3 - Select a photo or a folder with photos and press Slide
show.
Info
To view info on a photo (size, creation date, file path, etc.),
select a photo and press INFO.
Press again to hide the info.
Options
Press OPTIONS.
• Shuffle
Shows your photos in a random order.
• Repeat
Plays the slide show continuously.
• Slide show speed
Sets the speed of the slide show.
• Slide show transition
Sets the style of the photo transitions.
To close Browse USB or Browse network, press and select
another activity.
50
Play music
To play music, select Music in the menu bar, select a song
and press OK.
If there are more songs in the same folder, press Play all to
play all songs in this folder.
To jump to the next or previous song, press + or -.
To pause the music, press OK. Press OK again to continue.
To make a 10-second jump in a song or 10-second jump back,
press or .
To rewind or fast forward, press or . Press the keys
several times to speed up - 2x, 4x, 8x, 16x, 32x.
To stop the music playback, press (Stop).
If you press LIST or , the music keeps on playing.
Info
To view song info (title, artist, duration, etc.), select the song and
press INFO.
Press again to hide the info.
Options
Press OPTIONS.
• Shuffle
Plays your music randomly.
• Repeat
Plays the song once or continuously.
To close Browse USB or Browse network, press and select
another activity.
Play videos
To play a video, select Videos in the menu bar, select a
video and press OK.
If there are more videos in the same folder, press Play
all to play all videos in this folder.
To jump to the next or previous video, press + or -.
To pause the video, press OK. Press OK again to continue.
To make a 10-second jump forward or backward in a
video, press or .
To rewind or go fast forward, press or . Press the keys
several times to speed up - 2x, 4x, 8x, 16x, 32x.
To stop the video playback, press (Stop).
Info
To view info on a video (playhead position, duration, title, date,
etc.), select the video and press INFO.
Press again to hide the info.
Options
Press OPTIONS.
• Subtitles
If available, you can switch subtitles On, Off or On during mute.
• Shuffle
Plays your videos in a random order.
• Repeat
Plays a video once or continuously.
To close Browse USB or Browse network, press and select
another activity.
15.2
Wi-Fi Miracast
About Wi-Fi Miracast
Your TV is a Wi-Fi Certified Miracast™ device. With
Miracast™, you can watch and share the screen of your
smartphone, tablet or computer on your TV screen wirelessly.
You can stream videos (audio and video), share photos or
anything else that's on screen of the device. No need to connect
the device to your home network. Both the TV and the device
must be Wi-Fi Certified Miracast™ devices and have Miracast
switched on.
For more information on Wi-Fi Certified Miracast™ go to
www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED
Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance.
Switch Miracast On or Off
Switch on Miracast
Make sure Wi-Fi Miracast is switched on.
1 - Press and select Setup and press OK.
2 - Select Network settings > Wi-Fi Miracast > On and
press OK.
3 - Press , repeatedly if necessary, to close the menu.
Switch off Miracast
If you do not want the TV to receive requests for screen sharing
from other devices, you can switch off Miracast on the TV.
1 - Press and select Setup and press OK.
2 - Select Network settings > Wi-Fi Miracast > Off and
press OK.
3 - Press , repeatedly if necessary, to close the menu.
51
Share a screen on TV
To share the screen of your smartphone, tablet or computer on
the TV . . .
1 - Switch on the TV.
2 - On the device, open an application such as Wi-Fi Miracast,
Wi-Fi Direct™, Intel®Wireless Display* or similar and start
scanning for other Miracast devices.
3 - In the list of found devices, select the TV and connect.
4 - On the TV, agree to the request to connect to the TV. You
might be asked to enter a PIN code from the device on the TV -
enter the numbers with the digit keys on the remote control.
Alternatively, you might be asked by the TV to enter a PIN code
on the device. If you connect, the TV will show the screen of the
device.
5 - On the device, select the videos, photos or files you want to
watch on TV.
* Miracast is supported by WiFi 3.5 onwards.
Stop sharing
You can stop sharing a screen from the TV or from the mobile
device.
From the device
With the application you use to start Miracast, you can
disconnect and stop watching the screen of the device on TV.
The TV will switch back to the last selected programme.
From the TV
To stop watching the screen of the device on TV, you can . . .
• press to watch a TV broadcast
• press to start another activity on TV
• press SOURCES to open the Sources menu and select a
connected device.
Block a device
The first time you receive a request to connect from a device,
you can block the device. This request, and all requests in the
future, from this device, will be ignored.
To block a device, select Block . . . in the request window and
press OK.
Unblock all devices
All previously connected and blocked devices are stored in the
Wi-Fi Miracast list of connections. If you clear this list, all blocked
devices will be unblocked.
To unblock all blocked devices . . .
1 - Press and select Setup and press OK.
2 - Select Network settings > Reset Miracast group.
3 - Press OK to clear the list.
4 - Press , repeatedly if necessary, to close the menu.
Blocking a previously connected device
If you want to block a device that you previously connected, you
need to clear the Wi-Fi Miracast connections list first. If you clear
this list, you will have to confirm or block the connection for
every device again.
Screen delay
The normal delay when sharing a screen with Miracast is about 1
second. The delay might be longer if you are using older
devices/computers with less processing power.
Specifics
• Miracast on this TV is subject to the HDCP protocol and
cannot display copy-protected premium content sent by a
device.
• The maximum video resolution supported is 720p.
52
16
Pause TV
You can pause a TV broadcast and resume watching it later.
Only digital TV channels can be paused. You must connect a
USB Hard Drive to buffer the broadcast. You can pause a
broadcast for a maximum time span of 90 minutes.
For more information, press Keywords and look up USB
Hard Drive.
Pause or resume a broadcast
To pause a broadcast, press (Pause). A progress bar appears
briefly on screen.
To call up the progress bar, press (Pause) again.
To resume watching, press (Play). The icon on screen
indicates you are watching a paused broadcast.
Back to the actual TV broadcast
To switch back to the actual TV broadcast, press (Stop).
The moment you switch to a digital channel, the USB Hard
Drive starts buffering the broadcast. When you switch to
another digital channel, the broadcast of the new channel is
buffered and the broadcast of the former channel is cleared.
When you switch to a connected device (a Blu-ray Disc player
or digital receiver) the USB Hard Drive stops buffering and the
broadcast is cleared. Also when you switch the TV to standby
the broadcast is cleared.
Whilst recording a programme on the USB Hard Drive, you
cannot pause a broadcast.
Instant replay
Whilst watching a broadcast from a digital TV channel, you can
easily instant replay the broadcast.
To replay the last 10 seconds of a broadcast,
press (Pause) and press (Left).
You can press repeatedly until you reach the start of the
broadcast buffer or the maximum time span.
Progress bar
With the progress bar on screen, press (Rewind) or press
(Forward) to select from where you want to start viewing
the paused broadcast. Press these keys repeatedly to change
speed.
Specifics
• The Audio Description audio (commentary) for the visually
impaired is not available for playback in Pause TV or Recording.
• You can buffer the digital (DVB) subtitles of a channel. You
cannot buffer subtitles that come from Text services. To check if
digital (DVB) subtitles are available, tune to the TV channel and
press OPTIONS, select Subtitle language to open the list of
Subtitles. You can only buffer a subtitle language preceded by a
DVB icon.
53
17
Recording
17.1
What you need
To record a TV programme you need . . .
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV (the channels you
watch with Watch TV)
• to receive channel information for the built-in TV guide (from
the broadcaster or from the Internet)
For more information, press Keywords and look up USB
Hard Drive, installation.
17.2
Record a programme
Record now
To record the programme you are watching, press (Record)
on the remote control.
If you receive TV guide information from the Internet, you can
adjust the end time of the recording in the pop-up window
before you confirm the recording.
If you receive TV guide information from the broadcaster, the
recording starts immediately. You can adjust the end time of the
recording in the list of recordings.
To stop recording, press (Stop).
Schedule a recording
You can schedule a recording of an upcoming programme for
today or a few days from today (maximum of 8 days away).
1 - To schedule a recording, press TV Guide.
On the TV guide page, select the channel and programme you
wish to record.
You can enter the channel number to jump to the channel in
the list.
Press (Right) or (Left) to scroll through the programmes of
a channel.
To change the date of the list, press OPTIONS and select
Change day. In the list, select the day you want and press OK. If
the TV guide comes from the Internet, you can select the date
at the top of the page and press OK.
2 - With the programme highlighted, press Record. The TV
adds some time buffer at the end of the programme. You can
add some extra buffer if needed.
3 - Select Schedule and press OK. The programme is scheduled
for recording. A warning will appear / will be
shown automatically when overlapping recordings are scheduled.
If you plan to record a programme in your absence, remember
to leave the TV switched to standby and the USB Hard Drive
switched on.
List of recordings
To view the list of recordings and scheduled recordings, press ,
select Recordings and press OK.
In this list, you can select a recording to watch, remove recorded
programmes, adjust the end time of an ongoing recording or
check the free disk space. Also in this list, if the TV guide comes
from the Internet, you can schedule a recording for which you
set the beginning and end time yourself, as a timed recording
not linked to a programme. To set a timed recording, select
Schedule recording at the top of the page and press OK. Set
the channel, date and time span. To confirm the recording,
select Schedule and press OK.
Remove a scheduled recording
To remove a scheduled recording, select the upcoming
recording in the list and press OK. Alternatively, you can select
the scheduled recording and press OPTIONS and select
Cancel recording.
Specifics
• While recording a programme, you can watch a previously
recorded programme.
• While recording, you cannot switch TV channels.
• While recording, you cannot pause the TV broadcast.
• To Record, broadcasters need a reliable clock setting. If you
reset the TV clock manually, recordings may fail.
• The Audio Description audio (commentary) for the visually
impaired cannot be recorded.
• You can record the digital (DVB) subtitles of channel. You
cannot record subtitles that come from Text services. To check
if digital (DVB) subtitles are available, tune to the TV channel
and press OPTIONS, select Subtitle language to open the
list of Subtitles. You can only record a subtitle language
preceded by a DVB icon.
54
17.3
Watch a recording
To watch a recording . . .
1 - Press , select Recordings and press OK.
2 - In the list, select the recording and press (Play) to start the
playback. You can use the (Forward), (Rewind),
(Pause) or (Stop) keys on the remote control.
Expired recording
Broadcasters can limit the number of days a recording can be
viewed. A recording in the list can show the number of days
before it expires.
Failed recording
When a scheduled recording was prevented by the broadcaster
or when the broadcast was interrupted, a recording is marked as
Failed.
Delete a recording
To delete a made recording, select the recording in the list,
press OPTIONS and select Delete recording.
For more information, press Keywords and look up Record
a programme.
55
18
Skype
18.1
About Skype
With Skype™ you can make video calls on your TV for free.
You can call and see your friends from anywhere in the world.
Talk to your friends while watching them on the big screen of
your TV.
18.2
What you need
To make a video call on Skype, you need the separately sold
Philips PTA317 TV camera with a built-in microphone and a
good connection to the Internet.
Before you can start Skype, the TV must have a good quality
connection to the Internet. You can connect your TV either
wireless or wired.
For more information, press Keywords and look up
Network, wireless.
Skype account
To use Skype, you need to create a Skype account for yourself
or for your family. You can create a new account for Skype on
your TV or on your computer.
Skype Credit or Skype Subscriptions
With Skype, for a little cost, you can also call phones or mobile
phones. Using your computer you can buy Skype Credit or take
a Skype subscription at www.skype.com
No emergency calls
Skype is not a replacement for your telephone and cannot be
used for emergency calling.
18.3
Start with Skype
Install the camera
Connect the TV camera cable to one of the USB connections
on the TV.
Bend the small clamp as shown in the illustration below and
position the camera on the top of the TV.
Point the camera to the position you usually sit at. When you
are making a Skype call, you can pan, tilt or zoom in or out the
camera image.
You can position the camera anywhere you want but it is
recommended to put it away from the speakers of the TV.
If the TV camera is not connected, Skype will not start.
Sign in
Sign in to Skype with your Skype Name and password. If you
don't have a Skype Name yet, you have to create a new Skype
account.
To sign in to Skype…
1 - Press to open the Home menu.
2 - Select Skype and press OK to start Skype and open the Sign
in page.
3 - Select the Skype Name text field and enter your Skype
Name. To open the on screen keyboard, select the text field
and press OK. If you have signed in before, press LIST and
select your Skype Name. The TV remembers the 5 last Skype
Names that signed in.
4 - Select the Password text field and enter your password.
5 - When done, select Sign in and press OK.
You are signed in if the Skype menu opens on screen.
Need help?
If you have forgotten your Skype Name or password, or are
having problems signing in, please visit www.skype.com/support
New Skype account
If you don't have a Skype Name and Password yet, you can
create a new Skype account on your computer. Once you have
successfully created the new account, you can use your Skype
Name and password to sign in on TV. To create a Skype
account on your computer, go to www.skype.com
If you have a remote control with an integrated keyboard or
have a USB keyboard connected to the TV, you can create a
new Skype account on your TV.
To create a new account on your TV…
1 - On the Skype Sign in page, select Create a new account and
press OK.
2 - On the next menu, select Open browser and press OK.
3 - The TV opens the web page of www.skype.com directly.
You can create your new account on this web page.
4 - When Skype confirms that your new account is successfully
created, leave the web browser and go back to the Sign in page
of Skype on TV.
5 - Enter your Skype name and Password to sign in.
Skype Name
A Skype Name must begin with a letter, upper or lowercase. It
must have 6 to 32 characters and can contain numbers. A Skype
Name cannot contain a space.
Password
Your password must have 6 to 20 characters and must at least
contain one letter or one number. It cannot contain special
characters like a trademark, bullet or euro sign. A Skype
56
password cannot contain a space.
If you don't have a Skype Name and Password yet, you can
create a new account on the sign in page on TV.
1 - On the sign-in page, select New account and press OK.
2 - Create your new account.
• Full name
Enter your full name.
• Skype name
Enter a name as your Skype name. Your Skype Name will be
shown in the list of contacts of other Skype users. A Skype
Name must begin with a letter, upper or lowercase. It must have
6 to 32 characters and can contain numbers. A Skype Name
cannot contain a space.
• Password
Enter your password. Your password must have 6 to 20
characters and must at least contain one letter or one number. It
cannot contain special characters like a trademark, bullet or euro
sign. A Skype password cannot contain a space.
• Email
Enter your email address.
3 - Read and accept the Skype Terms of Use.
4 - If your new account was accepted, you are signed in.
You can edit or complete your Skype profile on your computer.
Start Skype on your computer, sign in with your Skype Name
and Password and open your Skype profile. You can change
your profile picture, add a mood message or set the privacy
settings.
Microsoft account
If you have a Microsoft account, you can use this account to sign
in to Skype on TV.
To sign in with a Microsoft account…
1 - On the Skype Sign in page, select Sign in with Microsoft
account and press OK.
2 - Select Next and press OK. The TV will open the Microsoft
account sign in web page.
3 - Enter your Microsoft account email and password.
4 - Select the Submit button and press OK.
No emergency calls
No emergency calls with Skype
Skype is not a replacement for your telephone and cannot be
used for emergency calling.
18.4
Skype menu
When you have signed in successfully, Skype opens the Skype
menu.
The Skype menu items are…
• My profile - your Skype name
To view or modify your Skype profile. Select your Skype Name
and press OK.
• People
In People, you can start making a Skype call and manage your
contacts.
• Call phones
In Call phones, you can call a landline or a mobile phone
number by dialing the number on a dial pad. You must have
Skype Credit or a Skype subscribtion to call a phone number.
You can't select Call phones if a camera and microphone are
not connected.
• History
In History, you can view your missed and former calls or view
Contact requests.
• Settings
In Settings, you can change your password, set your privacy and
voicemail settings or view your blocked contacts and much
more.
• Sign out
To sign out of Skype on TV.
18.5
My profile
In My profile, you can edit your personal profile for Skype.
• Public
View or change your profile information that can be viewed by
your contacts.
• Phone
You can enter or change your home, office or mobile phone
number here.
• Private
57
View or change your email address, check the amount of credit
you have or view the subscription information, or write a
message that reflects your mood.
• Profile picture
If you did not upload a profile picture with your computer yet,
you can select one of the available avatars as Profile picture
here.
• Online status
You can change your online status. Select the status you want
your contacts to see when you are online.
18.6
People
Your contacts
In People, you can find the list of your Skype contacts.
Your contacts are shown with their Skype Name. Contacts are
online and available for a Skype call when a green dot is shown
next their name.
You can use the text box in the top left corner of the contact
page to search for a contact within your contact list. Or, simply
scroll down the list to find the contact you want.
Add a contact
Add a Skype contact
In People, the list of your contacts, you can add a new Skype
contact.
Add a Skype contact
If you know the Skype Name or email of a friend, Skype can
easily find your contact. If you do not know their Skype Name
or email, you can also try to look for them by name.
To add a Skype contact…
1 - On the Contacts page, press OPTIONS.
2 - Select Add Skype Contact and press OK.
3 - Enter a Skype Name or email address of your new contact.
You can also try to enter a name. To open the on screen
keyboard, press OK. When you're done, press OK.
4 - Skype will search for the contact you are looking for and will
show the search results.
5 - Select the contact you want and press OK to send a contact
request.
6 - Write the request and press OK. Skype will send the request
message to your new contact. If the contact accepts the request,
the Skype Name of the new contact will appear in the your list
and you can call your contact on Skype.
Add a phone number
In People, the list of your contacts, you can add a phone number
as a contact. You can call a phone with a Skype voice call. You
need Skype Credits to make a phone call.
To add a phone number…
1 - On the Contacts page, press OPTIONS.
2 - Select Add a Phone Number and press OK.
3 - Enter the name of your contact. To open the on screen
keyboard, press OK. When you're done, press OK.
4 - Enter the phone number of your contact. Always start with a
country code (e.g. +31 for The Netherlands). Do not use the
double zero. When you're done , press OK. The name of your
phone number contact will appear in your list.
Accept a contact request
When you receive a Contact request, a small icon will show
next to History in the Skype menu.
To accept a contact request…
1 - In the Skype menu, select History and press OK.
2 - Select Contact requests and press OK. Select the request
and press OK. Skype will ask you to accept this contact. If you
accept, the contact will appear in your contact list.
Block a contact
You can Block a Skype contact. A blocked contact will be
unable to contact you on Skype. A blocked contact will not be
notified, you will appear as being offline in the contact list of the
blocked contact. You can always unblock contacts you have
blocked.
To block a contact…
1 - On the Contacts page, select the contact you want to block.
2 - Press OPTIONS and select Block and press OK. The
contact is blocked.
To unblock a contact…
1 - Select a contact that is blocked.
2 - Press OPTIONS and select Unblock and press OK. The
contact is unblocked.
To view a list of blocked contacts…
1 - In the Skype menu, select Settings and press OK.
2 - Select Blocked contacts and press OK. The list will show all
contacts you have blocked.
58
Remove or rename
You can Remove or Rename contacts.
To remove a contact…
1 - On the Contacts page, select the contact you want to
remove.
2 - Press OPTIONS and select Remove and press OK. The
contact is removed from the list.
To rename a contact…
1 - On the Contacts page, select the contact you want to
rename.
2 - Press OPTIONS and select Rename and press OK.
3 - Enter the new name for this contact in the text field. To
open the on screen keyboard, press OK. When you're done,
press OK.
18.7
Calling on Skype
Video or voice call
Make a Video call
Make a Video call to call and see your friends on your TV
screen.
To make a Video call…
1 - On the Contacts page, select the contact you want to call.
2 - Select Video call and press OK. If your contact is on Skype,
has a Skype camera connected and answers the call, you can see
this person on TV.
3 - To end the call, select End call and press OK.
When your Skype camera is switched on, a blue indicator LED
lights up. You can check what your contact can see in the small
screen on the bottom right of the TV screen.
To switch the Skype camera off, select Video Off and press
OK. To switch it back on, select Video On and press OK.
To mute your microphone, select Mic Off and press OK. To
switch it back on, select Mic On and press OK.
While you are making a video call, you can change the viewpoint
of the camera.
For more information on changing the viewpoint, press
Keywords and look up Skype, camera zoom, pan and tilt.
Make a Voice call
Make a Voice call to call without video, with the camera
switched off.
To make a Voice call…
1 - On the Contacts page, select the contact you want to call.
2 - Select Call and press OK. If your contact is on Skype and
answers the call, you can talk to your contact.
3 - To end the call, select End call and press OK.
A contact can add you to a voice call with more than one
participant. You cannot add an extra participant yourself.
Calling phones
With Skype you can also call landline phones and mobile
phones. To call phones you need to buy Skype Credit or a
Skype subscription.
To call a phone…
1 - On the Contacts page, select a phone number contact.
2 - Select Call and press OK. You must have Skype Credits
available or have a Skype subscription to make a call with a
phone number. If your contact answers the phone, you can talk
to your contact.
3 - To end the call, select End call and press OK.
With Skype, you can also call a phone number directly. You can
enter the phone number with the dial pad.
To open the dial pad…
1 - In the Skype menu, select Call phones and press OK.
2 - If the dial pad is not on screen, select Show Dial Pad and
press OK.
3 - Dial the phone number. You can navigate to the numbers
and press OK or use the number keys on the remote control.
No emergency calls
Skype is not a replacement for your telephone and cannot be
used for emergency calling.
Receiving a call
When you are signed in to Skype and watching TV, a ringtone
and a message on screen will alert you of an incoming call. The
message will show who is calling and you can answer or decline
the call.
To answer the call, select Answer with video and press OK.
To answer the call with the camera switched off, select Answer
with audio and press OK.
To decline the call, select Decline call and press OK.
History
In the History page of the Skype menu, you will find a list of all
calls you made, including the calls you missed. You can also see
new contact requests and listen to voicemails.
To view a list, select All calls, Missed calls, Incoming calls or
59
Outgoing calls and press OK.
To view new contact requests, select Contact requests and
press OK.
To view and listen to your voicemails, select Voicemails and
press OK.
For how long your Skype events are kept in this history list
depends on the amount of contacts you have and how
intensively you use Skype.
Voicemail
About Voicemail
If someone calls you on Skype and you do not take the call, he
or she can leave a spoken message on your Skype voicemail. If
you call a contact and they can't take the call, you can send a
Skype voicemail to your contact.
To send a voicemail or to receive a voicemail, you - or your
contact - must set up Skype voicemail first. You can set up
Voicemail on your computer. Go to www.skype.com
When you made voicemail available for you on a computer, set
your voicemail preferences in the Skype menu > Settings >
Voicemails.
Record a Voicemail
When you call a contact and they can't take the call, you can
leave a voicemail.
To record a voicemail…
1 - Call a contact. If your call was not answered, Skype will
propose to send a Voicemail.
2 - Select Yes and speak your message.
3 - To stop recording, select End call and press OK.
Play a Voicemail
A contact can send a voicemail message to you. If a voicemail
was sent to you, a small icon will show on the Skype menu. You
can play a voicemail from the History page.
To play a voicemail…
1 - In the Skype menu, select History and press OK.
2 - Select Voicemails and press OK.
3 - Select the voicemail you want to play and press OK. You can
listen to a voicemail as many times you want. To manage your
voicemails, press OPTIONS.
18.8
Skype credit
On Skype, you can buy Skype Credit or take a Skype
subscription. With Skype Credit or a Skype subscription
available, you can call landline phones and mobile phones with
your TV.
Buy Skype Credit
To buy Skype Credit or take a Skype subscription, sign in to
Skype on your computer.
The Skype Credit you buy will be available when you sign in to
Skype on your TV.
The amount of credit or the subscription information is shown
on each page where you can make a phone call.
Skype Credit low
You will be notified if your credit is too low to make a phone
call.
18.9
Skype settings
Signing in
You can set Skype to automatically sign in when you select
Skype from the Home menu. You do not need to enter your
Skype Name or password.
To sign in when Skype starts…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Signing in and press OK.
4 - Press (right) to select the check box and press OK to
mark Sign me in when Skype starts.
Change password
You can change your current Skype password and enter a new
password for your Skype account.
To change your password…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Change password.
4 - Press (right) to select Current password and enter your
current password. Press OK first if you want to use the on
screen keyboard.
5 - Press (down) to select New password and enter you new
password.
6 - Press (down) again to select Repeat new password and re-
enter the new password.
7 - Press (down) again to select Apply to send the new
60
password for confirmation.
Video
You can set Skype to restrict the use of video in Skype calls.
With Automatically receive video from, you can set Skype to
automatically receive and show video from Anyone, People in
my contact list only or from No one.
With Show that I have video to, you can set Skype to send out
your video to People in my contact list only or to No one.
To set the Video settings…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Video.
4 - Press (right) to select the radio buttons and press OK to
mark or unmark.
Privacy
You can set Skype to restrict incoming Skype calls.
You can allow calls from Anyone or from From people in my
contact list only.
To set the Privacy settings…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Privacy.
4 - Press (right) to select the radio buttons and press OK to
mark or unmark.
Blocked contacts
You can view a list of all your Blocked contacts.
To view the list…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Blocked contacts and press OK. To manage your
blocked contacts, press OPTIONS.
Voicemail
You can set some preferences for sending voicemails.
If you allow a contact to send you a voicemail when you can't
take the call, check the box of Send unanswered calls to
voicemail. Leave the box unchecked, if you do not want to
receive voicemails.
If you allow a contact to send you a voicemail when you can't
answer the call within 15 seconds and you are in another call,
check the box of I am already in a call.
If you allow a voicemail, when you declined a call, check the box
of I decline an incoming call.
To set your preferences for voicemail…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Select Voicemail and press OK.
4 - Press (down) or (up) to select a check box. Press OK
to check or uncheck.
Call forwarding
Never miss a Skype call with Call Forwarding.
If you are not online or can't take the call, you can forward a
Skype call to any phone or mobile phone. You can also forward
a Skype call to another Skype account. You can set up to three
phone numbers or Skype Names in order of preference to
forward calls to. You need Skype Credit or a Skype subscription
to forward calls to phones. Forwarding Skype calls to other
Skype accounts is free of charge. For more information on call
forwarding, go to www.skype.com/support
To set up call forwarding…
1 - Sign in to Skype with your account.
2 - In the Skype menu, select Settings and press OK.
3 - Press OK to check the check box for Forward calls when I
am not on Skype.
4 - In the entry fields below, enter the phone numbers or Skype
Names from your contact list in order of preference to forward
your calls to. Always add the country code for phone numbers.
5 - Change, if necessary, the amount of seconds before Skype
forwards your call.
6 - Select Save to store your Call Forwarding setup.
Camera zoom, pan and tilt
You can set the viewpoint of your camera. You can zoom in or
out, pan or tilt the camera frame. While you are in a Video call,
you can set the camera viewpoint.
To set the camera viewpoint…
1 - Start a Video call and wait until the call is ongoing.
2 - Press (right) to select the icon above the small screen and
press OK. A bar with colour key functions appears.
3 - To shift (pan) the camera frame, press (left) or
(right). To tilt the camera frame, press (up) or (down). To
zoom in, press Zoom in. To zoom out, press Zoom out.
61
4 - Press Done to store the camera viewpoint and to go
back to your Skype call.
18.10
Sign out
When you sign out of Skype, you are signing out your Skype
account. Your Online status will change to Offline. Your
contacts will not be able to call you.
To sign out…
1 - Press Back from anywhere within Skype to return to the
Skype menu.
2 - Select Sign out in the Skype menu and press OK.
The TV will ask you to quit Skype or to use Skype with another
Skype account.
18.11
Quit Skype
When you sign out of Skype, the Skype application on TV is still
active. Another Skype account can sign in or you can create a
new account. To stop the Skype application on TV, you must
quit Skype.
18.12
Terms of use & Privacy Policy
Read the Terms of Use of Skype at www.skype.com/go/tou
Also read the Privacy Policy at www.skype.com/go/privacy
62
19
Smart TV
19.1
About Smart TV
Connect this Philips Smart LED TV to the Internet and discover
a new world of television. You can make a wired connection to
your router or you can link up wirelessly with Wi-Fi.
With the TV connected to your home network, a smartphone
can show a photo on TV, you can play videos stored on your
computer or control the TV with your tablet.
With your TV connected to the Internet, you can watch a rental
video from an online video store, read the online TV guide or
record your favourite TV show on a USB Hard Drive. The Smart
TV Apps add to the fun with all sorts of entertainment and
convenient services.
19.2
What you need
To enjoy Smart TV Apps you must connect the TV to a router
with a high-speed (broadband) connection to the Internet. You
can use a home network connected to the Internet. You do not
need a computer.
For more information, press Keywords and look
up Network.
Tip
To enter text or to navigate an Internet page more easily, you
can consider to connect a USB keyboard and a USB mouse to
the TV.
For more information, press Keywords and look up USB
keyboard or USB mouse.
19.3
Setup Smart TV
The first time you open Smart TV, you need to configure your
connection. Read and agree to the terms and conditions to
continue. If you do not want to set up Smart TV, press .
Register
To register with Club Philips . . .
1 - Select Register and press OK.
2 - Enter your email address, select Continue and press OK.
3 - Confirm the email address.
Parental control
To lock Adult 18+ rated apps . . .
1 - Switch on Smart TV parental control by selecting Enable and
then press OK.
2 - Enter an unlock PIN code of your choice.
3 - Confirm your PIN code.
Adult 18+ rated apps are now locked. To open a locked app,
select the app and press OK. The TV will ask you to enter your
4-digit code.
19.4
Smart TV Apps
Open Smart TV
The Smart TV start page is your link to the Internet. You can
rent movies online, read newspapers, watch videos and listen to
music, also shop online, open your social network page
(Facebook, Twitter, . . .) or watch TV programmes when it suits
you with Online TV. To do this, you open Apps - Internet sites
which are tailored for TV. With your TV connected to the
Internet, you can open Smart TV.
Open Smart TV
To open the Smart TV start page, press Smart TV.
Alternatively, you can press , select Smart TV and press OK.
The TV connects to the Internet and opens the Smart TV start
page. This may take a few seconds.
Close Smart TV
To close the Smart TV start page, press and select another
activity.
TP Vision Europe B.V. bears no responsibility regarding the
content and the quality of the content provided by the content
service providers.
Smart TV start page
1 - Now on your TV
2 - Your Apps
3 - App gallery
4 - Internet
5 - Recommended Apps
6 - Search
7 - Colour keys for control
Your Apps
You start Apps from the Smart TV start page. If the start page
does not hold any Apps yet, you can add Apps from the App
gallery.
App gallery
In the App gallery you find all available Apps.
Internet
63
The Internet App opens the World Wide Web on your TV.
On your TV, you can view any Internet website but most of
them are not tailored for a TV screen.
- Some plug-ins (e.g. to view pages or videos) are not available
on your TV.
- Internet pages are shown one page at a time and full screen.
Recommended Apps
In this window, Philips presents a range of recommended Apps
for your country, Apps for Online TV or a selection of rental
movies from Video stores. You can select and open them from
the Recommended Apps window.
Search
With Search, you can search the App gallery for relevant Apps.
Enter a keyword in the text field, select and press OK to start
searching. You can enter names, titles, genres and description
keywords to search.
Alternatively, you can leave the text field empty and search for
the most popular searches/keywords for a range of categories. In
the list of found keywords, select a keyword and press OK to
search for items with that keyword.
Open an App
To open an App, you must add it to your list of Apps in the
Smart TV start page first.You can add Apps to your list from the
App gallery.
The list of your Apps on the Smart TV start page can be several
pages long. Use the arrow keys to go to the next or previous
page. Alternatively, press + (Next page) or - (Previous
page).
Open an App
To open an App . . .
1 - Press and select Smart TV.
2 - On the start page, select an App icon and press OK.
In an App, press to go back 1 step or page.
Close an App
To close an App and return to the Smart TV start page, press
Smart TV.
Reload an App page
If an App page did not load properly, press OPTIONS and
select Reload to reload the page.
Zoom
To zoom in on an App page . . .
1 - Press OPTIONS and select Zoom page.
2 - Use the slider bar to set the zoom level.
3 - Return to normal view by resetting the slider bar.
View security info
You can check the security level of an App page.
On an App page, press OPTIONS and select Security info.
If a lock is shown next to the loading animation on the
bottom of the screen while loading a page, the transfer is
secured.
Feedback on an App
Select the App and press Feedback to select a 'like' or 'don't
like' button and send a suggestion or remark to us. You can also
report an App malfunction.
Manage your Apps
In the list of Apps on the Smart TV start page you can . . .
• Remove an App
To remove an App from the list, select the App icon and
press Remove. The App is still available in the App gallery.
• Move an App
To reposition an App in the list, select the App icon,
press Move and use the arrow keys to reposition the App.
Press OK to confirm the position.
• Lock an App
To lock an App, select the App icon and press Lock.
When you lock an App, you must enter the 4 digit PIN code
you set for Parental control when you configured Smart TV. In
the list, a locked App is marked with a lock .
To unlock an App, select the App icon and press Unlock.
You must enter the 4 digit PIN code to unlock.
App gallery
Open the App gallery in Smart TV to browse the Apps, the
collection of tailored websites for TV.
Find the App for YouTube videos, a national newspaper, an
online photo album, Facebook, Twitter, etc. There are Apps to
rent a video from an online video store and Apps for watching
programmes you missed. If the App gallery does not hold what
you are looking for, try the World Wide Web and surf the
Internet on TV.
Rental video Apps
With the video store Apps in Smart TV, you can rent your
favourite movie from an online rental video store. You can pay
securely with your credit card.
Rent a movie
1 - Open a Video store App in your list of Apps or select a
recommended video on the Smart TV start page.
2 - Select a movie.
3 - Make the online payment.
4 - Start watching. You can use the (Play) and (Pause) keys.
Most Video stores ask you to create a login account.
64
Streaming video
With this TV, you can watch rental movies sent as a streaming
video format. You can almost instantly watch the movie. You
might need a USB Hard Drive to store some video buffer. If you
have a USB Hard Drive connected, you can also download
rental movies from video stores that offer movie downloading
only. You can pause or restart a downloaded rental movie.
Consult the video store regarding the rental duration of rental
movies.
Internet traffic
Streaming or downloading many videos may exceed your
monthly Internet traffic limit.
Online TV
With the Online TV App on the Smart TV start page*, you can
watch TV programmes you missed or watch programmes
whenever it suits you best.
Open Online TV
To open the Online TV App . . .
1 - Press Smart TV.
2 - On the start page, select the Online TV icon and press
OK.
3 - Select a programme on the page and press OK to start
watching. You can use the (Play) and (Pause) keys.
List per broadcaster
To view the Online TV programmes ordered by broadcaster,
press All broadcasters.
Select a broadcaster and press OK.
* If available in your region.
19.5
Multi view
While you are on a Smart TV App or the Internet, you can
watch the current TV channel. Multi view opens a small screen
for the TV channel next to the Smart TV screen.
To open Multi view…
1 - Press SMART TV to open Smart TV.
2 - Press MULTI VIEW to open the small screen.
3 - Press + or – to change the TV channel in the small
screen.
The Multi view screen cannot display video in 3D or in UHD.
With Multi view open, you cannot use the Remote Control
Pointer nor use a connected USB mouse in the Smart TV
screen.
19.6
Reset Smart TV
To reset your connection with Smart TV, clear the Internet
memory on the TV.
You will clear your Philips Smart TV registration and parental
rating setting, your video store app logins, all Smart TV app
favourites, Internet bookmarks and history.
To clear the Internet memory . . .
1 - Press and select Setup and press OK.
2 - Select Network settings > Clear Internet memory and
press OK.
65
20
Multi room
20.1
About Multi room
With Multi Room you can watch a TV programme that comes
from another TV in your home. The programme is streamed
from one TV to the other. You can stream a programme to a
TV that has no antenna connection or has no Smart card
subscription of its own. You can also stream a recorded
programme from a TV with a connected Hard Drive.
The TV that streams the programme to the other TV, must be
switched on and must tune to the channel or play the recording.
Streaming a TV programme with Multi Room will reduce the
picture resolution to 720p maximum. You cannot stream radio
channels. Some broadcasters protect their programmes to
prevent this kind of streaming.
20.2
What you need
To stream a TV programme from one TV to another, the
programme must come from a digital TV channel.
Both TVs must be connected to your wireless home
network. For more information, press Keywords and look
up Wireless Network.
Also, both TVs must have a Philips model number that ends
with an 8 or higher - e.g. xxXXXxxx8. It might be necessary to
update the older TV with its latest software. On the older TV,
read the Help chapter on updating software.
Make sure that both TVs have the setting Switch on with Wi-Fi
(WoWLAN) switched on in the TV setup.
To check this setting on this TV…
1 - Press , select Setup and press OK.
2 - Select Network settings > Switch on with Wi-Fi and
select On, and press OK.
3 - Press BACK repeatedly if necessary, to close the menu.
20.3
Using Multi room
First time use
When you start Multi room for the first time, switch on both
TVs.
Once this TV made a connection with the other TV, the other
one will appear automatically in the Browse network menu
even when it's in standby.
Stream a TV channel
With Multi room, you can watch the current TV channel or
open the channel list of the other TV. If you select a channel
from the list, the other TV will also switch to the channel you
selected. If the other TV has a build-in satellite tuner with
installed channels or a connected Hard Disc Drive (HDD) with
recordings*, you can also watch these on this TV. You cannot
switch channels while the other TV is recording, in Pause TV
mode or using Skype.
To watch a TV channel from the other TV . . .
1 - Make sure the other TV is in standby* or switched on.
2 - On this TV, press SOURCES, select Browse network
and press OK.
3 - If the TV is not yet connected to your home network, the
network installation will start automatically. If the TV is already
connected, go to step 4.
4 - In the Browse network menu, select the name of the other
TV and press OK. If you have several TVs in your home, you
might want to change the name of the other TV. You can do
that on the TV itself.
5 - Select what you want to watch from the other TV . . .
• to watch the current channel of the other TV, select Current
channel and press OK.
• to open the channel list of the other TV, select Watch TV and
press (Right).
• to open the satellite channel list of the other TV, select Watch
satellite and press (Right).
• to open the list of recordings* on the other TV, select Watch
recordings and press (Right).
• you can switch channels with + and -. You cannot
switch channels when the other TV is recording, in Pause TV
mode or using Skype.
* To switch on the other TV from standby or to watch its
recordings from a connected HDD, both TVs must have a type
number that ends with an 8 or higher - e.g. xxXXXxxx8 or
xxXXXxxx9.
TV name
To change the TV name . . .
Press > Setup > Network settings > TV network name.
66
21
Settings
21.1
Setup menu
Quick picture and sound settings
With Quick picture and sound settings you can set your basic
picture preferences in a few easy steps. The settings you made
are stored under the Picture style - Personal. You can return to
your picture preference if some settings were changed. You can
set a preferred picture setting for every TV activity or connected
device individually.
To return to your preferred picture setting, while watching a TV
channel, press , select Picture style and select Personal.
To set a Quick picture setting . . .
1 - Press , select Setup and press OK.
2 - Select Quick picture and sound settings and press OK. Go
through the steps and finish.
For more information, press Keywords and look up Picture
style.
TV settings
In the TV settings menu you can set all settings. The item
General settings in the menu holds a collection of settings like
Menu language, Sleep timer, Switch off timer, Universal access
and more.
For more information, press Keywords and look up the topic
you need.
Search for channels
With Search for channels, you can update your current channel
list and possible newly found channels are added to the channel
list. You can also do a re-installation of all channels. A channel
update or a channel reinstall may take some time.
Press Keywords and look up Channel, update or Channels,
re-install.
Channel settings
In the Channel settings menu, you can set your language
preferences or set Hearing impaired and Audio description for
people who are hearing and visually impaired. You can set an
age rating to prevent children from watching a rated programme
and set or change your Child lock code. You can switch on the
Automatic channel update, do a digital reception test or install
analogue channels manually.
Languages
Press Keywords and look up Audio language or Subtitles.
Universal access
Press Keywords and look up Universal access for visually
and hearing impaired users settings.
Channel installation
Press Keywords and look up Automatic channel update or
Channel update message. Also look up Manual installation for
installing analogue channels or DVB to switch the antenna
connection.
Child lock
Press Keywords and look up Child lock.
Search for satellite
Press Keywords and look up Satellite, installation.
Satellite settings
Languages
Press Keywords and look up Audio language or Subtitles.
Channel installation
Press Keywords and look up Satellite, automatic channel
update or Satellite, channel update message or Satellite,
automatic update options.
Child lock
Press Keywords and look up Satellite, channel lock.
Connect to network
Press Keywords and look up Network, wireless or
Network, wired.
Network settings
Press Keywords and look up Network, settings.
67
Update software
Press Keywords and look up Software, Internet
update or Software, USB update.
Update software
Press Keywords and look up Software, USB update.
Software settings
Press Keywords and look up Software, current version.
Watch demo
With Demo in menu, you can watch some demonstration
videos of some of the picture quality features of your TV.
21.2
Picture
Picture style
For easy picture adjustment, you can select a preset setting with
Picture style.
1 - While watching a TV channel, press , then select Picture
style.
2 - Select a style and press OK.
The available Picture styles are . . .
• Personal - Your preferences made in Quick picture settings
• Vivid - Ideal for daylight viewing
• Natural - Natural picture settings
• Standard - Factory standard settings
• Movie - Ideal for watching movies
• Photo - Ideal for viewing photos
Restore a Style
With a Picture Style selected, you can adjust any picture setting
in Setup > TV settings > Picture…
The selected style will store the changes you made. We
recommend to adjust the picture settings for the style Personal
only.
To restore the style to its original setting…
1 - Press and select Setup, and press OK.
2 - Select TV settings > Picture > Picture style and select the
style you want to reset.
3 - Press Restore Style.
4 - Select Yes and press OK. The style is restored.
5 - Press , repeatedly if necessary, to close the menu.
For more information on adjusting individual picture settings,
press Keywords and look up Picture.
Home or Shop
If the Picture style is switched back to Vivid every time you
switch on the TV, the TV location is set to Shop. A setting
meant for in-store promotion.
To set the TV for Home use . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Location and press
OK.
3 - Select Home and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Picture settings
Colour
With Colour, you can adjust the colour saturation of the
picture.
To adjust the colour . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Colour.
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
Contrast
With Contrast, you can adjust the contrast of the picture. If you
are watching 3D pictures, this setting is switched to 3D contrast.
To adjust the contrast . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Contrast.
3 - Press (right) and adjust the value with (up) or
(down).
4 - Press , repeatedly if necessary, to close the menu.
Sharpness
With Sharpness, you can adjust the level of sharpness in fine
detail of the picture.
To adjust the sharpness . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Sharpness.
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
68
Advanced picture settings
Colour settings
Colour enhancement
With Colour enhancement, you can enhance the colour
intensity and the details in bright colours.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Colour
> Colour enhancement.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the menu.
Colour temperature
With Colour temperature, you can set the picture to a preset
colour temperature or select Custom to set a temperature
setting yourself with Custom colour temperature. Colour
temperature and Custom colour temperature are settings
intended for expert users.
To select a preset . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Colour
> Colour temperature.
3 - Press (right) and select Normal, Warm or Cool. Select
Custom if you want to set a colour temperature yourself.
4 - Press , repeatedly if necessary, to close the menu.
Custom colour temperature
With Custom colour temperature, you can set a colour
temperature yourself. To set a Custom colour temperature,
first select Custom in the Colour temperature setting to make
the Custom colour temperature menu available. Custom
colour temperature is a setting intended for expert users.
To set a custom colour temperature . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Colour
> Custom colour temperature.
3 - Press (right).
4 - Select a setting with the arrow keys.
5 - Press OK to confirm a setting.
6 - Press , repeatedly if necessary, to close the menu.
Contrast settings
Contrast modes
With Contrast modes, you can set the level at which power
consumption can be reduced by dimming the intensity of the
screen. Choose for the best power consumption or for the
picture with the best intensity.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast >
Contrast modes.
3 - Press (right) and select Best Picture, Best Power,
Standard or Off.
4 - Press , repeatedly if necessary, to close the menu.
Dynamic contrast
With Dynamic contrast, you can set the level at which the TV
automatically enhances the details in the dark, middle and light
areas of the picture.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Dynamic contrast.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the menu.
Brightness
With Brightness, you can set the level of brightness of the
picture signal. Brightness is a setting intended for expert users.
We recommend non-expert users to adjust the brightness of
the picture with the Contrast setting.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Brightness.
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
Video contrast
With Video contrast, you can decrease the range of the video
contrast. If you are watching 3D pictures, this setting is switched
to 3D video contrast. Video contrast and 3D video contrast are
settings intended for expert users.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Video contrast.
69
3 - Press (right) and adjust the value with (up) or
(down).
4 - Press , repeatedly if necessary, to close the menu.
Light sensor
The Light sensor adjusts the picture and Ambilight settings
automatically to the lighting conditions of the room. You can
switch Light sensor on or off.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Light sensor.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
Gamma
With Gamma, you can set a non-linear setting for picture
luminance and contrast. Gamma is a setting intended for expert
users.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Gamma.
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
Sharpness settings
Super resolution
With Super resolution, you switch on a superior sharpness in
line edges and contours.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Sharpness >
Super resolution.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
Noise reduction
With Noise reduction, you can filter out and reduce the level of
image noise.
To adjust the noise reduction . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Sharpness
> Noise reduction.
3 - Press (right) and select Maximum, Medium, Minimum or
Off.
4 - Press , repeatedly if necessary, to close the menu.
MPEG artefact reduction
With MPEG artefact reduction, you can smoothen the digital
transitions in the picture. MPEG artefacts are mostly visible as
small blocks or jagged edges in images.
To reduce the MPEG artefacts . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Sharpness
> MPEG artefact reduction.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the menu.
Motion settings
HD Natural Motion
With HD Natural Motion, you can reduce the motion judder,
visible in movies on TV.
To adjust the motion judder . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Motion > HD
Natural Motion.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the menu.
Clear LCD
With Clear LCD, you switch on a superior motion sharpness,
better black level, high contrast with a flicker-free, quiet image
and a larger viewing angle.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Motion > Clear
LCD.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
Game or computer
You can switch the TV to the ideal picture setting for gaming or
for using the TV as a computer monitor. There is a different
setting for Game or Computer. If a device has a correct type set
in the Source menu - Game console or Computer - the TV
switches automatically to the ideal setting when you switch to
the device. If you switch the setting manually, do not forget to
70
switch it off when you switch to watching TV or another
connected device.
To switch the setting manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Activity style.
3 - Select Game, Computer or TV. The setting TV returns to
the picture settings for watching TV.
4 - Press , repeatedly if necessary, to close the menu.
Location
If the TV is located in a shop, you can set the TV to display an in
store promotion banner. The Picture style is set to Vivid
automatically. The automatic Switch off timer is switched off.
To set the TV to Shop location . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Location and press
OK.
3 - Select Shop and press OK.
4 - Press , repeatedly if necessary, to close the menu.
21.3
Sound
Sound style
For easy sound adjustment, you can select a preset setting with
Sound style.
1 - While watching a TV channel, press , then select Sound
style.
2 - Select a style and press OK.
The different Sound styles are . . .
• Personal - Your personal choices made in Personalise sound
• Original - Factory standard
• Movie - Ideal for watching movies
• Music - Ideal for listening to music
• Game - Ideal for gaming
• News - Ideal for speech
Restore a Sound style
With a Sound style selected, you can adjust any sound setting in
Setup > TV settings > Sound…
The selected style will store the changes you made. We
recommend to adjust the sound settings for the style Personal
only
To restore the style to its original setting…
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Sound style and select the
style you want to reset.
3 - Press Restore Style.
4 - Select Yes and press OK. The style is restored.
5 - Press BACK repeatedly if necessary, to close the menu.
Press Keywords and look up Sound for adjusting individual
sound settings.
Sound settings
Bass
With Bass, you can adjust the level of low tones in the sound.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Bass.
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
Treble
With Treble, you can adjust the level of high tones in the sound.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Treble.
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
Surround mode
With Surround mode, you can set the sound effect of the TV
speakers. If you select Incredible surround for 2D viewing, the
TV will switch to Incredible surround 3D automatically when
you start watching 3D. If you do not want the TV to switch
automatically, select Off in Auto surround 3D.
To set the surround mode . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Surround mode.
3 - Press (right) and select Stereo, Incredible surround or
Incredible surround 3D.
4 - Press , repeatedly if necessary, to close the menu.
Auto surround 3D
With Auto surround 3D, you can block the TV to automatically
switch to Incredible surround 3D when the TV is switched to
3D.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Auto surround 3D.
3 - Press (right) and select On or Off.
71
4 - Press , repeatedly if necessary, to close the menu.
Headphones volume
With Headphones volume, you can set the volume of a
connected headphones separately.
To adjust the volume . . .
1 - Press and select Headphones volume in the menu bar.
2 - Press (up) or (down) to adjust the volume.
3 - Press , repeatedly if necessary, to close the menu.
Advanced sound settings
Auto volume levelling
With Auto volume levelling, you can set the TV to automatically
level out sudden volume differences. Typically at the beginning of
adverts or when you are switching channels.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Auto volume
leveling.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
TV speakers
You can send the TV sound to a connected audio device - a
Home Theatre System or audio system. With TV speakers, you
select where you want to hear the TV sound and how you want
to control it.
• If you select Off, you permanently switch off the TV speakers.
• If you select TV speakers, the TV speakers are always on.
With an audio device connected with HDMI CEC, you can use
one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to the
audio device. The TV will switch off the TV speakers when the
device is playing the sound.
• If you select EasyLink autostart, the TV will switch on the
audio device, send the TV sound to the device and switch off
the TV speakers.
With EasyLink or EasyLink autostart selected, you can still
switch to TV speakers or device speakers in sound menu.
To set the TV speakers . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Sound output.
3 - Press (right) and select Off, TV speakers, EasyLink or
EasyLink autostart.
4 - Press , repeatedly if necessary, to close the menu.
To switch speakers directly . . .
1 - While watching TV, press OPTIONS and select Picture
and sound.
2 - Select Speakers and select TV or Amplifier (audio device).
3 - Press , repeatedly if necessary, to close the menu.
Clear sound
With Clear Sound, you improve the sound for speech. Ideal for
news programmes. You can switch the speech improvement on
or off.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Clear Sound.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
HDMI ARC
If you do not need an Audio Return Channel (ARC) on any of
the HDMI connections, you can switch the ARC signal off.
For more information, press Keywords and look up HDMI
ARC.
Audio out format
With Audio out format you can set the audio out signal of the
TV to fit the sound processing capabilities of your Home
Theatre System.
For more information, press Keywords and look up Audio
Out format.
Audio out levelling
With Audio out leveling you can level the sound volume of the
Home Theatre System with the volume of the TV when you
switch over from one to another.
For more information, press Keywords and look up Audio
Out leveling.
Audio out delay
If you set an Audio sync delay on your Home Theatre System,
to synchronise the sound with the picture, you must switch off
Audio out delay on the TV.
For more information, press Keywords and look up Audio
Out delay.
72
Audio out offset
If you cannot set a delay on the Home Theatre System, you can
set a delay on the TV with Audio out offset.
For more information, press Keywords and look up Audio
Out offset.
Speakers
Home Theatre System
You can send the TV sound to a connected audio device - a
Home Theatre System or audio system.
You can select where you want to hear the TV sound and how
you want to control it.
• If you select Off, you permanently switch off the TV speakers.
• If you select TV speakers, the TV speakers are always on.
With an audio device connected with HDMI CEC, you can use
one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to the
audio device. The TV will switch off the TV speakers when the
device is playing the sound.
• If you select EasyLink autostart, the TV will switch on the
audio device, send the TV sound to the device and switch off
the TV speakers.
With EasyLink or EasyLink autostart selected, you can still switch
to TV speakers if necessary.
To set the TV speakers . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Sound output.
3 - Press (right) and select Off, TV speakers, EasyLink or
EasyLink autostart.
4 - Press , repeatedly if necessary, to close the menu.
To switch to speakers directly . . .
1 - While watching TV, press .
2 - Select Speakers and select TV or Amplifier (audio system).
3 - Press , repeatedly if necessary, to close the menu.
TV placement
As part of the first installation, this setting is set to either On a
TV stand or Wall mounted. If you have changed the placement
of the TV since then, adjust this setting accordingly for best
sound reproduction.
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > TV placement and
press OK.
3 - Select On a TV stand or Wall mounted and press OK.
4 - Press , repeatedly if necessary, to close the menu.
21.4
Ambilight
Ambilight style
Ambilight can have a preset mode or a static mode.
With preset mode, the TV follows the colours of the image on
screen.
With Static, Ambilight has a constant static colour. You can
create an Ambilight static colour yourself.
First, select the Ambilight style you prefer.
To select an Ambilight style . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Ambilight style.
3 - Select one of the preset style or Off.
4 - Press , repeatedly if necessary, to close the menu.
To select a static colour . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Ambilight
style > Static and press OK.
3 - Select the colour from the colour palette. Press OK to
confirm.
4 - Press , repeatedly if necessary, to close the menu.
Ambilight settings
Ambilight brightness
With Ambilight Brightness, you can set the level of brightness of
the Ambilight.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Brightness.
3 - Press OK and adjust the value with (up) or (down).
4 - Press , repeatedly if necessary, to close the menu.
Ambilight saturation
With Ambilight Saturation, you can set the level of saturation of
the Ambilight.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Saturation.
3 - Press OK and adjust the value with (up) or (down).
4 - Press , repeatedly if necessary, to close the menu.
Ambilight+hue
73
What you need
With Ambilight+hue, you can set up your Philips Hue lamps to
follow the Ambilight colours of the TV. The Philips Hue lamps
will expand the Ambilight effect across the room. If you don’t
have any Philips Hue lamps yet, buy the Philips Hue Starter Kit
(includes a hue bridge and 3 hue bulbs) and install the bulbs and
bridge. You can buy extra Philips Hue bulbs separately.
To set up Ambilight+hue on your TV you need…
• a Philips Hue bridge
• a few Philips Hue bulbs
• this TV connected to your home network
You can do the complete Ambilight+hue setup on TV and don’t
need the Ambilight+hue App.
If you do download the free Ambilight+hue App on your
smartphone or tablet later, you can use this App to adjust some
Ambilight+hue settings.
Configure
Configuration steps
To configure Philips Hue bulbs as Ambilight+hue bulbs, follow
the steps on the following pages…
1 - Network
2 - Hue bridge
3 - Hue bulbs
4 - Configure bulb
Network
In this first step, you will prepare the TV to find the Philips Hue
Bridge.
The TV and the Philips Hue Bridge must use the same network.
Connect the Philips Hue Bridge to the router — the router of
the network the TV is using.
Switch on the hue bulbs.
To start the configuration…
1 - Press (Ambilight) and select on any Ambilight Style.
2 - Press and select Setup and press OK.
3 - Select TV settings > Ambilight > Ambilight+hue and press
OK.
4 - Select Ambilight+hue one step further, select On and press
OK.
5 - Select Configure Ambilight+hue and press OK.
If the TV is connected to your home network, it will start
looking for the Philips Hue Bridge immediately.
If the TV is not yet connected to your network, the TV will start
the network setup first. You must connect the TV to your home
network.
With the TV connected to your network, go to page Hue
Bridge.
For more info on connecting the TV to your home network,
press Keywords and look up Network, wireless.
Hue Bridge
In the following step, you will link up the TV with the Philips
Hue Bridge.
The TV can only be linked up to one Hue Bridge.
To link the Hue Bridge…
1 - With the TV connected to the network, it will show the
available Hue Bridges. If the TV did not find your Hue Bridge yet,
you can select Scan again and press OK.
If the TV found the only Hue Bridge you have, select Next and
press OK.
If you have more than one Hue Bridge available, press (up) or
(down) to select the Hue Bridge you want to use and then
select Next and press OK.
2 - After you pressed OK, go to the Philips Hue Bridge and
press the link button in the middle of the device. This will link
the Hue Bridge with the TV. Do this within 30 seconds. The TV
will confirm if a Hue Bridge is linked to the TV.
3 - On this confirmation, select OK and press OK.
With the Philips hue bridge linked to the TV, go to page Hue
bulbs.
Hue bulbs
In the following step, you will select the Philips Hue bulbs that
have to follow the Ambilight.
You can select a maximum of 9 Philips Hue bulbs for
Ambilight+hue.
To select the bulbs for Ambilight+hue…
1 - In the Configure Ambilight+hue menu, select Hue bulbs and
press OK.
2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press OK.
3 - When you’re done, select the OK button and press OK.
With the bulbs marked for Ambilight+hue, go to page
Configure bulb.
Configure bulb
In the following step, you will configure each Philips Hue bulb.
To configure each Hue bulb…
1 - Select the bulb name in the Configure Ambilight+hue menu
and press OK. The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the Angle will send the correct Ambilight
colour to the bulb. Press (up) or (down) to adjust.
3 - Press (right) to set the distance.
4 - Secondly, indicate the Distance between the bulb and the
74
TV. The further away from the TV, the weaker the Ambilight
colour. Press (up) or (down) to adjust.
5 - Press (right) to set the brightness.
6 - Finally, set the Brightness of the bulb. Press (up) or
(down) to adjust.
7 - To stop configuring this bulb, select OK and press OK.
8 - In the Configure Ambilight+hue menu, you can select every
bulb and do the same.
9 - When all Ambilight+hue bulbs are configured, select Finish
and press OK.
Ambilight+hue is ready for use.
You can always change the Ambilight+hue configuration later.
To change the configuration, press and select Setup > TV
settings > Ambilight > Ambilight+hue > Configure
Ambilight+hue.
Immersion
With Immersion, you can adjust the level of the Ambilight effect
for the Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion…
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Ambilight+hue >
Immersion and press OK.
3 - Press (up) or (down) to adjust.
4 - Press , repeatedly if necessary, to close the menu.
Info
In View configuration, you can consult the current
Ambilight+hue configuration. Which network you use, how
many bulbs are connected, etc.
To view the current Ambilight+hue setup…
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Ambilight+hue > View
configuration and press OK.
3 - Select the item you want to view and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Advanced Ambilight settings
Wall Colour
With Wall Colour, you can neutralise the influence of a
coloured wall on the Ambilight colours. Select the colour of the
wall behind the TV and the TV will modify the Ambilight colours
to appear as they are intended.
To select the colour of the wall . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Advanced > Wall Colour.
3 - Select the colour sample that matches the colour of the wall
behind the TV and press OK.
4 - Press , repeatedly if necessary, to close the menu.
TV switch off
With TV switch off, you can set Ambilight to switch off
immediately or slowly fade out when you switch off the TV. The
slow fade out gives you some time to switch on the lights in
your living room.
To select the way how Ambilight switches off…
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Advanced > TV switch
off.
3 - Select Fade out to off or Immediate switch off.
4 - Press , repeatedly if necessary, to close the menu.
Lounge light mood
When the TV is on standby, you can switch Ambilight on and
create a Lounge light effect in your room.
To switch Ambilight on while the TV is on standby, press
(Ambilight).
To change the Lounge light colour range, press
(Ambilight) again.
To switch off Lounge light, press and hold (Ambilight) for a
few seconds.
You can also set up the colour range in the TV settings menu.
1 - Switch on the TV (out of the Lounge light mode).
2 - Press and select Setup and press OK.
3 - Select TV settings > Ambilight > Advanced > Lounge light
mood and press OK.
4 - Select the colour range you prefer.
5 - Press , repeatedly if necessary, to close the menu.
Lounge light+hue
If you installed Ambilight+hue, you can let the hue bulbs follow
Lounge light from Ambilight. The Philips Hue lamps will expand
the Loung light effect across the room. The Hue bulbs are
switched on and automatically set to follow Lounge light when
you configure Ambilight+hue.
To switch the hue bulbs on or off…
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Advanced > Lounge
light+hue.
3 - Select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
75
21.5
Universal access
Switch on
With Universal access switched on, the TV is set for use for
hearing and visually impaired people.
Switch on
If you did not switch on Universal access during the installation,
you can still switch it on in Setup.
To switch on Universal access . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Universal access
and press OK.
3 - Select On and press OK.
4 - Press , repeatedly if necessary, to close the menu.
With Universal access switched on in Setup, the Universal
access option is added in the Options menu.
Hearing impaired
Switch on
Digital TV channels can broadcast special audio commentary
describing what is happening on screen.
To be able to set the visually impaired audio and effects, you
have to switch on Audio description first.
Also, before you can switch on Audio description, you have to
switch on Universal access.
Audio description
With Audio description, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available) . . .
1 - With Universal access switched on, press
OPTIONS and select Universal access.
2 - Select Audio description and press OK.
3 - Select On and press OK.
You can check if an audio commentary is available.
In the Options menu, select Audio language and look for an
audio language marked with a .
Speakers / Headphones
With Speakers / Headphones, you can select where you want
to hear the audio commentary.
On the TV speakers only, on the headphones only or on both.
To set Speakers / Headphones . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio description >
Speakers / Headphones and press OK.
3 - Select Speakers, Headphones or Speakers + headphones
and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Visually impaired
Mixed volume
You can mix the volume of the normal audio with the audio
commentary.
To mix the volume . . .
1 - Press OPTIONS and select Universal access in the
menu bar.
2 - Select Mixed volume and press OK.
3 - Use or to set the slider bar.
4 - Press OK to confirm.
Audio effect
Some audio commentary can hold extra audio effects, like
stereo or fading sound.
To switch on Audio effects (if available) . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio description >
Audio effects and press OK.
3 - Select On or Off and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Speech
The audio commentary can also hold subtitles for the words
which are spoken.
To switch on these subtitles (if available) . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio description >
Speech and press OK.
3 - Select Descriptive (audio) or Subtitles and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Key beep
Key beep gives an audio feedback each time you press a key on
the remote control. The volume of the beep is fixed.
To switch on Key beep . . .
1 - Press OPTIONS, select Universal access and press OK.
2 - Select Key beep and select On.
If Universal access does not appear in the Options menu, switch
on Universal access in Setup.
76
For more information, press Keywords and look
up Universal access.
77
22
Specifications
22.1
Environmental
Saving energy
The Eco settings bundle the settings that help the environment.
While you are watching TV channels, press icon, then
select Eco settings, press OK.
Active settings are marked with a . You can mark or unmark
each setting with the OK key.
Press again to close Eco settings.
Energy saving
This Picture style sets the picture, in the most ideal energy
conscious setting.
For more information, press Keywords and look up Picture
style.
Screen off
If you only listen to music, you can switch off the TV screen to
save energy.
Select Screen off and press OK. To switch the screen back on,
press any key on the remote control. (Except key)
Light sensor*
To save energy, the built-in ambient light sensor lowers the
brightness of the TV screen when the surrounding light darkens.
The built-in light sensor automatically adjusts the picture, to the
lighting conditions of the room.
* Only for TVs with light sensor
Switch off timer
If you do not press a key on the remote control during a 4 hour
period, or if the TV receives no signal for 10 minutes, the TV
switches off automatically to save energy.
If you use the TV as a monitor or use a digital receiver to watch
TV (a Set-top box - STB) and you do not use the remote
control of the TV, deactivate the automatic switch off.
In addition to the Eco settings, your TV also has environmentally
friendly technology with regard to power consumption.
Inactive devices off
Switch off connected EasyLink HDMI-CEC (Consumer
Electronic Control) compliant devices that are inactive.
European energy label
The European Energy Label informs you on the energy
efficiency class of this product. The greener the energy efficiency
class of this product is, the lower the energy it consumes.
On the label, you can find the energy efficiency class, the average
power consumption of this product in use and the average
energy consumption for 1 year. You can also find the power
consumption values for this product on the Philips website for
your country at www.philips.com/TV
End of use
Disposal of your old product and batteries
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means that the product is covered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and do not dispose of
your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative
consequences for the environment and human health.
Your product contains batteries covered by the European
Directive 2006/66/EC, which cannot be disposed with normal
household waste.
Please find out for yourself about the local rules on separate
collection of batteries because correct disposal will help to
prevent negative consequences for the environment and human
health.
22.2
Reception for non-satellite TVs
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband; S-Channel; UHF; VHF
• DVB :
- For model name with PxH: DVB-T (terrestrial, antenna)
78
COFDM 2K/8K; DVB-C (cable) QAM
- For model name with PxT: DVB-T2; DVB-C (cable) QAM
• Analogue video playback : NTSC; SECAM; PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2);
MPEG4 SD/HD (ISO/IEC 14496-10)
• Digital audio playback (ISO/IEC 13818-3)
Note: See selected countries on the TV type plate
22.3
Reception for satellite TVs
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband, S-Channel, UHF, VHF
• DVB :
- For model name with PxK:
DVB-T (terrestrial, antenna) COFDM 2K/8K; DVB-C (cable)
QAM; DVB-S/S2 QPSK, symbol rate 2 to 45M symbols, SCPC
and MCPC
- For model name with PxS:
DVB-T2; DVB-C (cable) QAM; DVB-S/S2 QPSK, symbol rate 2
to 45M symbols, SCPC and MCPC
• Analogue video playback : NTSC, SECAM, PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2),
MPEG4 SD/HD (ISO/IEC 14496-10)
• Digital audio playback (ISO/IEC 13818-3)
• Satellite aerial input : 75 ohm F-type
• Input frequency range : 950 to 2150MHz
• Input level range : 25 to 65 dBm
• Supported satellites : Astra 19.2°E, Astra 23.5°E, Astra 28.2°E,
Hotbird 13.0°E, TürkSat 42.0°E, Eutelsat 7°W, Thor 1°W
• Astra HD+ support
• LNB : DiSEqC 1.0, 1 to 4 LNBs supported, Polarity selection
14/18V, Band selection 22kHz, Tone burst mode, LNB current
300mA max
Note: See selected countries on the TV type plate.
22.4
Display
Type
• Diagonal screen size :
- 61 cm / 24 inch
- 81 cm / 32 inch
- 102 cm / 40 inch
- 107 cm / 42 inch
- 119 cm / 47 inch
- 122 cm / 48 inch
- 127 cm / 50 inch
- 140 cm / 55 inch
- 164 cm / 65 inch
• Display resolution :
- PFxxxx9 : 1920x1080p
- PHxxxx9 : 1366x768p
Input resolution for HD/FHD TVs
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz
Computer formats
Resolutions (amongst others)
• 640 x 480p - 60 Hz
• 800 x 600p - 60 Hz
• 1024 x 768p - 60 Hz
• 1280 x 768p - 60 Hz
• 1360 x 765p - 60 Hz
• 1360 x 768p - 60 Hz
• 1280 x 1024p - 60 Hz
• 1920 x 1080p - 60 Hz
22.5
Power
Product specifications are subject to change without notice. For
more specification details of this product,
see www.philips.com/support
Power
• Mains power : AC 220-240V +/-10%
• Ambient temperature : 5°C to 35°C
• Standby power consumption : < 0.3W
• Power saving features : Energy saving, Screen off, Light sensor,
Switch off timer, Inactive devices off.
The power rating stated on the product typeplate is the power
consumption for this product during normal household use (IEC
62087 Ed.2). The maximum power rating, stated between
brackets, is used for electrical safety (IEC 60065 Ed. 7.2).
22.6
Dimensions and weights (69x9
series)
40Pxx69x9
• without TV stand:
79
Width 910.4 mm - Height 539.5 mm - Depth 60.7 mm - Weight
±9.55 kg
• with TV stand:
Width 910.4 mm - Height 592.2 mm - Depth 231.9 mm -
Weight ±12 kg
48Pxx69x9
• without TV stand:
Width 1078.8 mm - Height 634.4 mm - Depth 63.1 mm -
Weight ±12.9 kg
• with TV stand:
Width 1078.8 mm - Height 687.5 mm - Depth 222.4 mm -
Weight ±14.3 kg
55Pxx69x9
• without TV stand:
Width 1235 mm - Height 722.4 mm - Depth 63.2 mm - Weight
±17.2 kg
• with TV stand:
Width 1235 mm - Height 774 mm - Depth 280 mm - Weight
±18.8 kg
22.7
Connectivity
TV Rear
• Audio In (DVI to HDMI): Stereo mini-jack 3.5mm
• CVBS: Audio L/R, CVBS in, RGB
• SCART: Audio L/R, CVBS in, RGB
• YPbPr : Y Pb Pr, Audio L/R : Stereo mini-jack 3.5mm
• Digital Audio out: Optical, Toslink
• Network LAN : RJ45
• HDMI in with ARC
• USB 2.0
TV Side
• HDMI in with ARC
• USB 2.0
• Common interface slot: CI+/CAM
• Headphones: Stereo mini-jack 3.5mm
22.8
Multimedia
Connections
• USB 2.0
• Ethernet LAN RJ-45*
• Wi-Fi 802.11b/g/n (built-in)*
Supported USB file systems
• FAT 16, FAT 32, NTFS
Playback formats
• Containers : 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS,
MPEG-4, Matroska (MKV), Quicktime (MOV, M4V, M4A),
Windows Media (ASF/WMV/WMA)
• Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4
Part 10 AVC (H264), VC-1, WMV9
• Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB, Dolby
Digital, Dolby Digital Plus, DTS 2.0 + Digital Out™,
MPEG-1/2/2.5 Layer I/II/III (includes MP3), WMA (v2 to v9.2),
WMA Pro (v9/v10)
• Subtitles :
– Formats : SAMI, SubRip (SRT), SubViewer (SUB), MicroDVD
(TXT), mplayer2 (TXT), TMPlayer (TXT)
– Character encodings : UTF-8, Central Europe and Eastern
Europe (Windows-1250), Cyrillic (Windows-1251), Greek
(Windows-1253), Turkish (Windows-1254), Western Europe
(Windows-1252)
• Image Codecs : JPEG
• Limitations :
– Maximum supported total bit rate for a media file is 30Mbps.
– Maximum supported video bit rate for a media file is 20Mbps.
– MPEG-4 AVC (H.264) is supported up to High Profile @ L4.1.
– VC-1 is supported up to Advanced Profile @ L3.
Wi-Fi Certified Miracast™*
This TV supports WiDi 4.x devices.
Supported media server software (DMS)*
• PC - Microsoft Windows XP, Vista or Windows 7
– You can use any DLNA certified® media server software.
– Microsoft - Windows Media Player
• Mac OS X
– You can use any DLNA certified® media server software.
• Mobile devices
– Philips MyRemote - iOS, Android
– Interoperability and performance may vary, depending on the
capabilities of the mobile device and the software used.
ESD regulations
This apparatus meets performance criteria A for ESD. In case
the apparatus does not recover in file sharing mode due to
electrostatic discharge, user interference is required.
* Only for Smart TVs.
80
23
Software
23.1
Software update
Update from USB
It might be necessary to update the TV software. You need a
computer with an high-speed Internet connection and a USB
memory device to upload the software on the TV. Use a USB
memory device with 256MB free space. Make sure that write
protection is switched off.
1 - Start the update on TV
Press , select Setup and press OK.
Select Update software > USB and press OK.
2 - Identify the TV
Insert the USB memory into one of the USB connections of the
TV.
Select Start and press OK. An identification file is written on the
USB memory device.
3 - Download the TV software
Insert the USB memory into your computer.
On the USB memory device, locate the file update.htm and
double click it.
Click on Send ID.
If new software is available, download the .zip file.
After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update starts
automatically.
The TV switches itself off for 10 seconds and then back on again.
Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
If a power cut occurs during the update, never remove the USB
memory device from the TV. When the power returns, the
update will continue.
At the end of the update, the message Operation
successful appears on screen. Remove the USB memory device
and press on the remote control.
Do not . . .
• press twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then back on
again. Please wait.
The TV software has been updated. You can use the TV again.
To prevent an accidental update of the TV software, delete the
autorun.upg file from the USB memory device.
Update from Internet
If the TV is connected to the Internet, you may receive a
message from TP Vision to update the TV software. You need a
high-speed (broadband) Internet connection.
If you receive this message, we recommend you carry out the
update.
Select Update. Follow the instructions on screen.
You can also look for new updates yourself.
To look for an update . . .
1 - Press and select Setup and press OK.
2 - Select Update software > TV with Internet, then
press OK. Follow the instructions on screen.
When the update is complete, the TV switches off and back on
again automatically.
Wait for the TV to switch itself back on.
23.2
Software version
To view the current TV software version . . .
1 - Press and select Setup and press OK.
2 - Select Software settings and press OK.
3 - Select Current software info and see Release Version.
4 - Press , repeatedly if necessary, to close the menu.
23.3
Open source software
This television contains open source software. TP Vision Europe
B.V. hereby offers to deliver, upon request, a copy of the
complete corresponding source code for the copyrighted open
source software packages used in this product for which such
offer is requested by the respective licences.
This offer is valid up to three years after product purchase to
anyone in receipt of this information.
To obtain the source code, please write in English to . . .
Intellectual Property Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
23.4
Open source license
Acknowledgements and License Texts for any open source
software used in this Philips TV.
81
This is a document describing the distribution of the source
code used on the Philips TV, which fall either under the GNU
General Public License (the GPL), or the GNU Lesser General
Public License (the LGPL), or any other open source license.
Instructions to obtain source code for this software can be
found in the user manual.
PHILIPS MAKES NO WARRANTIES WHATSOEVER, EITHER
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, REGARDING THIS SOFTWARE. Philips offers no
support for this software. The preceding does not affect your
warranties and statutory rights regarding any Philips product(s)
you purchased. It only applies to this source code made available
to you.
Freetype (2.4.3)
FreeType is a software font engine that is designed to be small,
efficient, highly customizable, and portable while capable of
producing high-quality output (glyph images).
This piece of software is made available under the terms and
conditions of the FreeType Project license, which can be found
below.
Source: http://freetype.sourceforge.net
zlib (1.2.3)
The 'zlib' compression library provides in-memory compression
and decompression functions, including integrity checks of the
uncompressed data.
This piece of software is made available under the terms and
conditions of the zlib license, which can be found below.
Source: http://www.zlib.net/
Fraunhofer AAC Ecnoder (3.3.3)
AAC Ecnoder.
Source: Android JB source code
unicode (3.2)
This library is used to perform UNICODE string manipulation.
This piece of software is made available under the terms and
conditions of the ICU license, which can be found below.
Source: http://www.icu-project.org/
libpng (1.2.43)
PNG decoder.
This piece of software is made available under the terms and
conditions of the libpng license, which can be found below.
Source: http://www.libpng.org/pub/png/libpng.html
libjpg (6b)
This library is used to perform JPEG decoding tasks.
This piece of software is made available under the terms and
conditions of the libjpg license, which can be found below.
Source: http://www.ijg.org/
libmng (1.0.10)
libmng -THE reference library for reading, displaying, writing and
examining Multiple-Image Network Graphics.MNG is the
animation extension to the popular PNG image-format.
This piece of software is made available under the terms and
conditions of the libmng license, which can be found below.
Source: http://sourceforge.net/projects/libmng/files/
u-Boot loader (1.3.4)
Used by boot loader and only linked with boot loader, GPL
license.
This piece of software is made available under the terms and
conditions of the u-Boot loader license, which can be found
below.
Source: http://sourceforge.net/projects/u-boot/files/u-boot/U-
Boot-1.1.4/u-boot-1.1.4.tar.bz2/download
Libcurl (7.21.7)
HTTP client;libcurl is a free and easy-to-use client-side URL
transfer library, supporting FTP, FTPS, HTTP, HTTPS, SCP, SFTP,
TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP, SMTP, POP3
and RTSP. libcurl supports SSL certificates, HTTP POST, HTTP
PUT, FTP uploading, HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM, Negotiate,
Kerberos4), file transfer resume, http proxy tunneling and more!
This piece of software is made available under the terms and
conditions of the Libcurl license, which can be found below.
Source: http://curl.haxx.se/
c-ares (1.7.4)
c-ares is a C library that performs DNS requests and name
resolves asynchronously.
This piece of software is made available under the terms and
conditions of the c-ares license, which can be found below.
Source: http://c-ares.haxx.se/c-ares-1.7.1.tar.gz
openssl (1.0.0d)
OpenSSL is an open source implementation of the SSL and TLS
protocols. The core library (written in the C programming
language) implements the basic cryptographic functions and
provides various utility functions. Wrappers allowing the use of
the OpenSSL library in a variety of computer languages are
available.
This piece of software is made available under the terms and
conditions of the 1.7.4 license, which can be found below.
Source: http://www.openssl.org/source/openssl-1.0.0.tar.gz
Expat (2.01)
xml paser; Expat is an XML parser library written in C. It is a
stream-oriented parser in which an application registers handlers
for things the parser might find in the XML document (like start
tags). An introductory article on using.
This piece of software is made available under the terms and
conditions of the Expat license, which can be found below.
Source: http://expat.sourceforge.net/
DirectFB include SAWMAN (1.4.0)
It is a software library for GNU/Linux/UNIX based operating
system with a small memory footprint that provides graphics
acceleration, input device handling and abstraction layer, and
integrated windowing system with support for translucent
82
windows and multiple display layers on top of the Linux
framebuffer without requiring any kernel modifications.
This piece of software is made available under the terms and
conditions of the DirectFB license, which can be found below.
Source: http://sourceforge.net/projects/jointspace/files/remote_a
pplications_SDK/remote_spplications_SDK_v1.3.1/DirectFB141_
source_1.3.1.7z/download
SAWMAN
SquashFS is a compressed read-only file system for Linux.
SquashFS compresses files, inodes and directories, and supports
block sizes up to 1 MB for greater compression. SquashFS is also
the name of free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
Source: http://squashfs.sourceforge.net/
Linux Kernel (3.0)
The Linux kernel is an operating system kernel used by the Linux
family of Unix-like operating systems.
This piece of software is made available under the terms and
conditions of the Linux Kernel license, which can be found
below.
Source: http://www.kernel.org
SQLite (3.7.2)
SQLite is a in-process library that implements a self-contained,
serverless, zero-configuration, transactional SQL database
engine.
This piece of software is made available under the terms and
conditions of the SQLite license, which can be found below.
Source: http://www.sqlite.org/download.html
SquashFS (3.4)
SquashFS is a compressed read-only file system for Linux.
SquashFS compresses files, inodes and directories, and supports
block sizes up to 1 MB for greater compression. SquashFS is also
the name of free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the terms and
conditions of the SquashFS license, which can be found below.
Source: http://squashfs.sourceforge.net/
glibc (2.6.1)
Any Unix-like operating system needs a C library: the library
which defines the ``system calls'' and other basic facilities such as
open, malloc, printf, exit...The GNU C library is used as the C
library in the GNU system and most systems with the Linux
kernel
This piece of software is made available under the terms and
conditions of the glibc license, which can be found below.
Source: http://www.gnu.org/software/libc/
mtd-utils (1)
The aim of the system is to make it simple to provide a driver
for new hardware, by providing a generic interface between the
hardware drivers and the upper layers of the system. Hardware
drivers need to know nothing about the storage formats used,
such as FTL, FFS2, etc., but will only need to provide simple
routines for read, write and erase. Presentation of the device's
contents to the user in an appropriate form will be handled by
the upper layers of the system.
This piece of software is made available under the terms and
conditions of the mtd-utils license, which can be found below.
Source: http://www.linux-mtd.infradead.org/index.html
libusb (1.0.6)
This is the home of libusb, a library that gives user level
applications uniform access to USB devices across many different
operating systems. libusb is an open source project licensed
under the GNU Lesser General Public License version 2.1.Many
participants in the libusb community have helped and continue
to help with ideas, implementation, support and improvements
for libusb.
This piece of software is made available under the terms and
conditions of the libusb license, which can be found below.
Source:
http://libusb.wiki.sourceforge.net
http://www.libusb.org/
libusb-compat (0.1.3)
Library to enable user space application programs to
communicate with USB devices.
This piece of software is made available under the terms and
conditions of the libusb-compat license, which can be found
below.
Source: http://libusb.wiki.sourceforge.net/LibusbCompat0.1
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform implementation of
the Microsoft Windows NTFS file system with read-write
support. NTFS-3G often uses the FUSE file system interface, so
it can run unmodified on many different operating systems. It is
runnable on Linux, FreeBSD, NetBSD, OpenSolaris, BeOS,
QNX, WinCE, Nucleus, VxWorks, Haiku,MorphOS, and Mac
OS X It is licensed under either the GNU General Public
License or a proprietary license. It is a partial fork of ntfsprogs
and is under active maintenance and development.
This piece of software is made available under the terms and
conditions of the NTFS-3G Read/Write Driver license, which
can be found below.
Source: http://www.tuxera.com
WPA Supplicant (0.5.10 & 0.6.7)
These packages are used to provide WiFi access.The supplier for
these tools is Atheros.These pieces of software are made
available under the terms and conditions of the GPL v2 license,
which can be found below.
This piece of software is made available under the terms and
conditions of the WPA Supplicant license, which can be found
below.
Source: http://hostap.epitest.fi/wpa_supplicant/
ntfsprogs (2.0.0)
Some useful tool for ntfs file sytem.
This piece of software is made available under the terms and
conditions of the ntfsprogs license, which can be found below.
83
Source: http://sourceforge.net/projects/linux-ntfs
fuse (2.8.4)
Fuse is a simple interface for userspace programs to export a
virtual filesystem to the linux kernel.
This piece of software is made available under the terms and
conditions of the fuse license, which can be found below.
Source: http://fuse.sourceforge.net/
libiconv (1.11.1)
This library provides an iconv() implementation, for use on
systems which don't have one, or whose implementation cannot
convert from/to Unicode. .
This piece of software is made available under the terms and
conditions of the libiconv license, which can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
electric-fence (2.1.13)
Used for memory corruption detection.
This piece of software is made available under the terms and
conditions of the electric-fence license, which can be found
below.
Source: http://perens.com/FreeSoftware/ElectricFence/electric-
fence_2.1.13-0.1.tar.gz
liveMedia
When Wifi Display or streaming RtspPlayer are enabled.
This piece of software is made available under the terms and
conditions of the electric-fence license, which can be found
below.
Source: www.live555.com
QT (4.7.0)
Netflix skpe besttv pandora picasa? will use QT.
This piece of software is made available under the terms and
conditions of the QT license, which can be found below.
Source: http://qt.nokia.com/
e2fsprogs (1.41.14)
e2fsprogs provides the filesystem utilities for use with the ext2
filesystem, it also supports the ext3 and ext4 filesystems.
This piece of software is made available under the terms and
conditions of the e2fsprogs license, which can be found below.
Source: http://e2fsprogs.sourceforge.net/
alsa (1.0.24.1)
Advanced Linux Sound Architecture (ALSA).
This piece of software is made available under the terms and
conditions of the alsa license, which can be found below.
Source: http://www.alsa-project.org
lvm2 (2.02.89)
DM_VERITY.
This piece of software is made available under the terms and
conditions of the lvm2 license, which can be found below.
Source: ftp://sources.redhat.com/pub/lvm2/releases/
encfs (1.3.2)
A library provides an encrypted filesystem in user-space.
Source: http://www.arg0.net/encfs
boost (1.15.0)
A library provides free peer-reviewed portable C++ source
libraries is used for encfs.
Source: http://www.boost.org
rlog (1.4)
A library that provides a flexible message logging facility for C
programs and libraries is used for encfs.
Source: http://www.arg0.net/rlog
iptables (1.4.15)
For Cross connection.
Source: http://www.netfilter.org/projects/iptables/
bash (3.2.48)
Bash is the shell, or command language interpreter, that will
appear in the GNU operating system.
Bash is an sh-compatible shell that incorporates useful features
from the Korn shell (ksh) and C shell (csh).
It is intended to conform to the IEEE POSIX P1003.2/ISO
9945.2 Shell and Tools standard.
It offers functional improvements over sh for both programming
and interactive use.
In addition, most sh scripts can be run by Bash without
modification.
Source: http://www.gnu.org/software/bash/
coreutils (6.9)
The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
These are the core utilities which are expected to exist on every
operating system.
Source: http://www.gnu.org/software/coreutils/
findutils (4.2.31)
The GNU Find Utilities are the basic directory searching utilities
of the GNU operating system.
These programs are typically used in conjunction with other
programs to provide modular and powerful directory search and
file locating capabilities to other commands.
Source: http://www.gnu.org/software/findutils/
gawk (3.1.5)
If you are like many computer users, you would frequently like
to make changes in various text files wherever certain patterns
appear, or extract data from parts of certain lines while
discarding the rest.
To write a program to do this in a language such as C or Pascal
is a time-consuming inconvenience that may take many lines of
code.
The job is easy with awk, especially the GNU implementation:
gawk.
Source: http://www.gnu.org/software/gawk/
grep (2.5.1a)
84
The grep command searches one or more input files for lines
containing a match to a specified pattern. By default, grep prints
the matching lines.
Source: http://www.gnu.org/software/grep/
gzip (1.3.12)
GNU Gzip is a popular data compression program originally
written by Jean-loup Gailly for the GNU project. Mark Adler
wrote the decompression part.
Source: http://www.gnu.org/software/gzip/
inetutils (1.4.2)
Inetutils is a collection of common network programs.
Source: http://www.gnu.org/software/inetutils/
iputils (s20101006)
The iputils package is set of small useful utilities for Linux
networking. It was originally maintained by Alexey Kuznetsov.
Source: http://www.skbuff.net/iputils/
module-init-tools (3.12)
Provides developer documentation for the utilities used by Linux
systems to load and manage kernel modules (commonly
referred to as "drivers").
Source: https://modules.wiki.kernel.org/index.php/Main_Page
ncurses (5.7)
The Ncurses (new curses) library is a free software emulation of
curses in System V Release 4.0, and more.
It uses Terminfo format, supports pads and color and multiple
highlights and forms characters and function-key mapping, and
has all the other SYSV-curses enhancements over BSD Curses.
Source: http://www.gnu.org/software/ncurses/
net-tools (1.6)
The Net-tools?package is a collection of programs for controlling
the network subsystem of the Linux kernel.
Source: http://www.linuxfromscratch.org/blfs/view/6.3/basicnet/n
et-tools.html
procps (ps, top) (3.2.8)
procps is the package that has a bunch of small useful utilities
that give information about processes using the /proc filesystem.
The package includes the programs ps, top, vmstat, w, kill, free,
slabtop, and skill.
Source: http://procps.sourceforge.net/index.html
psmisc (22.13)
This PSmisc package is a set of some small useful utilities that use
the proc filesystem. We're not about changing the world, but
providing the system administrator with some help in common
tasks.
Source: http://psmisc.sourceforge.net/
sed (4.1.5)
sed (stream editor) isn't an interactive text editor. Instead, it is
used to filter text, i.e., it takes text input, performs some
operation (or set of operations) on it, and outputs the modified
text.
sed is typically used for extracting part of a file using pattern
matching or substituting multiple occurrences of a string within a
file.
Source: http://www.gnu.org/software/sed/
tar (1.17)
GNU Tar provides the ability to create tar archives, as well as
various other kinds of manipulation.
For example, you can use Tar on previously created archives to
extract files, to store additional files, or to update or list files
which were already stored.
Source: http://www.gnu.org/software/tar/
util-linux-ng (2.18)
Various system utilities.
Source: http://userweb.kernel.org/~kzak/util-linux-ng/
udhcpc (0.9.8cvs20050303-3)
Udhcpc is a very small?DHCP?client geared towards?embedded
systems.
Source:
http://udhcp.sourcearchive.com/downloads/0.9.8cvs20050303-3/
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a support for the
execution of NCL application. This library was developed for the
GNOME software suite and is available under a "MIT" license.
Source: http://www.xmlsoft.org
uriparser (0.7.7)
For MPEG-DASH
Source: http://uriparser.sourceforge.net/
xerces-c++ (3.1.1)
For MPEG-DASH
Source: http://xerces.apache.org/
webp (0.2.1)
For Netflix
Source: https://code.google.com/p/webp/
wget (1.10.2)
GNU Wget is a free software package for retrieving files using
HTTP, HTTPS and FTP, the most widely-used Internet
protocols.
It is a non-interactive commandline tool, so it may easily be
called from scripts,?cron?jobs, terminals without X-Windows
support, etc.
Source: http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
wireless_tools (0.29)
The Wireless Tools (WT)?is a set of tools allowing to
manipulate the Wireless Extensions.
They use a textual interface and are rather crude, but aim to
support the full Wireless Extension.
Source: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/T
ools.html
85
ezxml (0.8.6)
ezXML is a C library for parsing XML documents. Used inside
Philips libraries.
Source: http://sourceforge.net/projects/ezxml/
SQLite (3.7.7.1)
SQLite is a in-process library that implements a self-contained,
serverless, zero-configuration, transactional SQL database
engine.
Source: http://www.sqlite.org/download.html
AES (aes-src-29-04-09.zip)
Advanced Encryption Standard (AES) is a specification for the
encryption of electronic data. Used inside Philips libraries.
Source: http://gladman.plushost.co.uk/oldsite/AES/
microhttpd (libmicrohttpd-0.9.9.tar.gz)
GNU libmicrohttpd is a small C library that is supposed to make
it easy to run an HTTP server as part of another application.
The original download site for this software is :
http://www.gnu.org/software/libmicrohttpd/This piece of
software is made available under the terms and conditions of the
LGPL v2.1 license
Source:
http://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.9.tar.gz
yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)
YAJL is a small event-driven (SAX-style) JSON parser written in
ANSI C, and a small validating JSON generator. YAJL is released
under the ISC license.
The original download site for this software is :
http://lloyd.github.com/yajl/This piece of software is made
available under the terms and conditions of the ISC license
Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/lloyd-yajl-2.0.
1-0-gf4b2b1a.tar.gz/df6a751e7797b9c2182efd91b5d64017/lloyd-
yajl-2.0.1-0-gf4b2b1a.tar.gz
HMAC-SHA1 (0.1)
keyed-hash message authentication code (HMAC) is a specific
construction for calculating a message authentication code
(MAC) involving a cryptographic hash function in combination
with a secret cryptographic key.
As with any MAC, it may be used to simultaneously verify both
the data integrity and the authentication of a message.
Any cryptographic hash function, such as MD5 or SHA-1, may
be used in the calculation of an HMAC; the resulting MAC
algorithm is termed HMAC-MD5 or HMAC-SHA1 accordingly.
Source: http://www.deadhat.com/wlancrypto/hmac_sha1.c
gSoap (2.7.15)
The gSOAP toolkit is an open source C and C++ software
development toolkit for SOAP/XML Web services and generic
(non-SOAP) C/C++ XML data bindings.
Part of the software embedded in this product is gSOAP
software. Portions created by gSOAP are Copyright 2000-2011
Robert A. van Engelen, Genivia inc. All Rights Reserved.
Source: http://sourceforge.net/projects/gsoap2/
jquery (1.10.2)
jQuery is a fast and concise JavaScript Library that simplifies
HTML document traversing, event handling, animating, and Ajax
interactions for rapid web development.
Source: http://jquery.com/
Libupnp (1.2.1)
The Linux* SDK for UPnP* Devices (libupnp) provides
developers with an API and open source code for building
control points, devices, and bridges that are compliant with
Version 1.0 of the UPnP Device Architecture Specification.
Source: http://upnp.sourceforge.net/
mDNSResponder (mDNSResponder-320.10.80)
The mDNSResponder project is a component of Bonjour,
Apple's ease-of-use IP networking
initiative:<http://developer.apple.com/bonjour/>
In our project, Bonjour is used for the automatic discovery of
devices and services
Source: http://developer.apple.com/bonjour/
86
24
Troubleshooting and
support
24.1
Troubleshooting
Channels
No digital channels found during the installation
See the technical specifications to make sure that your TV
supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected and that the
correct network is selected.
Previously installed channels are not in the channel list
Make sure that the correct channel list is selected.
General
The TV does not switch on
• Disconnect the power cable from the power outlet. Wait for
one minute then reconnect it.
• Make sure that the power cable is securely connected.
Creaking sound at startup or switch off
When you are turning the TV on, off or to standby, you hear a
creaking sound from the TV chassis. The creaking sound is due
to the normal expansion and contraction of the TV as it cools
and warms up. This does not affect performance.
TV does not respond to the remote control
The TV requires some time to start up. During this time, the TV
does not respond to the remote control or TV controls. This is
normal behaviour.
If the TV continues to be unresponsive to the remote control,
you can check if the remote control is working by means of a
mobile phone camera. Put the phone in camera mode and point
the remote control to the camera lens. If you press any key on
the remote control and you notice the infra red LED flicker
through the camera, the remote control is working. The TV
needs to be checked.
If you do not notice the flickering, the remote control might be
broken or its batteries are low.
This method of checking the remote control is not possible with
remote controls which are wirelessly paired with the TV.
The TV goes back to standby after showing the Philips startup
screen
When the TV is in standby, a Philips startup screen is displayed,
then the TV returns to standby mode. This is normal behaviour.
When the TV is disconnected and reconnected to the power
supply, the startup screen is displayed at the next startup. To
switch on the TV from standby, press on the remote control or
the TV.
The standby light keeps on blinking
Disconnect the power cable from the power outlet. Wait 5
minutes before you reconnect the power cable. If the blinking
reoccurs, contact Philips TV Consumer Care.
Wrong menu language
Change the language back to your language.
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Menu language and
press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Picture
No picture / distorted picture
• Make sure that the antenna is properly connected to the TV.
• Make sure that the correct device is selected as the display
source.
• Make sure that the external device or source is properly
connected.
Sound but no picture
• Make sure that the picture settings are set correctly.
Poor antenna reception
• Make sure that the antenna is properly connected to the TV.
• Loud speakers, unearthed audio devices, neon lights, high
buildings and other large objects can influence reception quality.
If possible, try to improve the reception quality by changing the
antenna direction or moving devices away from the TV.
• If reception on only one channel is poor, fine-tune this
channel.
Poor picture from a device
• Make sure that the device is connected properly.
• Make sure that the picture settings are set correctly.
Picture settings change after a while
Make sure that Location is set to Home. You can change and
save settings in this mode.
A commercial banner appears
Make sure that Location is set to Home.
Picture does not fit the screen
Change to a different picture format. Press .
Picture format keeps changing with different channels
Select a non 'Auto' picture format.
Picture position is incorrect
87
Picture signals from some devices may not fit the screen
correctly. Check the signal output of the connected device.
Computer picture is not stable
Make sure that your PC uses the supported resolution and
refresh rate.
Sound
No sound or poor sound quality
If no audio signal is detected, the TV automatically switches the
audio output off — this does not indicate malfunction.
• Make sure that the sound settings are correctly set.
• Make sure that all cables are properly connected.
• Make sure that the volume is not muted or set to zero.
• Make sure that the TV audio output is connected to the audio
input on the Home Theatre System.
Sound should be heard from the HTS speakers.
• Some devices may require you to manually enable HDMI
audio output. If HDMI audio is already enabled, but you still do
not hear audio, try changing the digital audio format of the
device to PCM (Pulse Code Modulation). Refer to the
documentation accompanying your device for instructions.
Connections
HDMI
• Note that HDCP (High-bandwidth Digital Content Protection)
support can delay the time taken for a TV to display content
from an HDMI device.
• If the TV does not recognise the HDMI device and no picture
is displayed, switch the source from one device to another and
back again.
• If there are intermittent sound disruptions, make sure that
output settings from the HDMI device are correct.
• If you use an HDMI-to-DVI adapter or HDMI-to-DVI cable,
make sure that an additional audio cable is connected to
AUDIO IN (mini-jack only), if available.
EasyLink does not work
• Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices that are
HDMI-CEC compatible.
No volume icon shown
• When a HDMI-CEC audio device is connected this behaviour
is normal.
Photos, videos and music from a USB device do not show
• Make sure that the USB storage device is set to Mass Storage
Class compliant, as described in the storage device's
documentation.
• Make sure that the USB storage device is compatible with the
TV.
• Make sure that the audio and picture file formats are
supported by the TV.
Choppy playback of USB files
• The transfer performance of the USB storage device may limit
the data transfer rate to the TV which causes poor playback.
24.2
Register
Register your TV and enjoy a range of benefits including full
support (including downloads), privileged access to information
about new products, exclusive offers and discounts, the chance
to win prizes and even participate in special surveys about new
releases.
Go to www.philips.com/welcome
24.3
Help
This TV offers help on screen.
Open Help
1 - Press to open the Home menu.
2 - Select Help and press OK.
To look up topics alphabetically, select Keywords.
To read the Help as a book, select Book.
Before you execute the Help instructions, close Help.
To close Help, press .
Direct help
Press the key (blue) to open Help immediately. Help will
open on the chapter that is most relevant to what you are doing
or what is selected on TV.
For some activities, like Text (Teletext), the colour keys have
specific functions and cannot open Help.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format to read on
your smartphone, tablet or computer. Alternatively, you can
print the relevant Help page from your computer.
To download the Help (user manual) go to
www.philips.com/support
UMv 7500140505 - 20140805
88
24.4
Online help
To solve any Philips TV related problem, you can consult our
online support. You can select your language and enter your
product model number.
Go to www.philips.com/support .
On the support site you can find your country's telephone
number to contact us as well as answers to frequently asked
questions (FAQs). In some countries, you can chat with one of
our colaborators and ask your question directly or send a
question by email.
You can download new TV software or the manual to read on
your computer.
24.5
Consumer Care / Repair
For support and repair, call the Consumer Care hotline in your
country. Find the telephone number in the printed
documentation that came with the TV.
Or consult our website www.philips.com/support .
TV model number and serial number
You might be asked to provide the TV product model number
and serial number. Find these numbers on the packaging label or
on the type label on the back or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may cause severe
injury, irrepairable damage to your TV or void your warranty.
89
25
Safety and care
25.1
Safety
Important
Read and understand all safety instructions before you use the
TV. If damage is caused by failure to follow instructions, the
warranty does not apply.
Secure the TV from falling over
Always use the supplied wall bracket to secure the TV from
falling over. Mount the bracket and secure the TV onto the
bracket, even if you put the TV on the floor.
You can find the mounting instructions in the Quick Start Guide
that came with the TV. In case you lost this guide, you can
download the guide from www.philips.com
Use the product type number of the TV to look for the Quick
Start Guide to download.
Risk of electric shock or fire
• Never expose the TV to rain or water. Never place liquid
containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV from the
power outlet immediately.
Contact Philips TV Consumer Care to have the TV checked
before use.
• Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning candles, naked
flames or other heat sources, including direct sunlight.
• Never insert objects into the ventilation slots or other
openings on the TV.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power plugs can
cause arcing or fire. Ensure that no strain is exerted on the
power cord when you swivel the TV screen.
• To disconnect the TV from the mains power, the power plug
of the TV must be disconnected. When disconnecting the
power, always pull the power plug, never the cord. Ensure that
you have full access to the power plug, power cord and outlet
socket at all times.
Risk of injury or damage to the TV
• Two people are required to lift and carry a TV that weighs
more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the supplied stand.
Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support the weight
of the TV and the stand.
• When wall mounted, ensure that the wall mount can safely
bear the weight of the TV set. TP Vision bears no responsibility
for improper wall mounting that results in accident, injury or
damage.
• Parts of this product are made of glass. Handle with care to
avoid injury or damage.
Risk of damage to the TV !
Before you connect the TV to the power outlet, ensure that the
power voltage matches the value printed on the back of the TV.
Never connect the TV to the power outlet if the voltage is
different.
Risk of injury to children
Follow these precautions to prevent the TV from toppling over
and causing injury to children:
• Never place the TV on a surface covered by a cloth or other
material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of the
mounting surface.
• Never place the TV on tall furniture, such as a bookcase,
without anchoring both the furniture and TV to the wall or a
suitable support.
• Teach children about the dangers of climbing on furniture to
reach the TV.
Risk of swallowing batteries !
The remote control may contain coin-type batteries which can
easily be swallowed by small children. Keep these batteries out
of reach of children at all times.
Risk of overheating
Never install the TV in a confined space. Always leave a space of
at least 10 cm or 4 inches around the TV for ventilation. Ensure
curtains or other objects never cover the ventilation slots on the
TV.
90
Lightning storms
Disconnect the TV from the power outlet and antenna before
lightning storms.
During lightning storms, never touch any part of the TV, power
cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high volumes or for
prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or 41°F,
unpack the TV and wait until the TV temperature reaches room
temperature before connecting the TV to the power outlet.
Humidity
In rare occasions, depending on temperature and humidity,
minor condensation can occur on the inside of the TV glass
front (on some models). To prevent this, do not expose the TV
to direct sunlight, heat or extreme humidity. If condensation
occurs, it will disappear spontaneously while the TV is playing for
a few hours.
The condensation moisture will not harm the TV or cause
malfunction.
25.2
Screen care
• Never touch, push, rub or strike the screen with any object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and wipe
gently. Avoid touching the Ambilight LEDs on the backside of
the TV. Never use substances such as alcohol, chemicals or
household cleaners on the TV.
• To avoid deformations and colour fading, wipe off water drops
as quickly as possible.
• Avoid stationary images as much as possible. Stationary images
are images that remain onscreen for extended periods of time.
Stationary images include onscreen menus, black bars, time
displays, etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
91
26
Terms of use,
copyrights and licenses
26.1
Terms of use
2014 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision Europe
B.V. or one of its affiliates, hereinafter referred to as TP Vision,
which is the manufacturer of the product. TP Vision is the
warrantor in relation to the TV with which this booklet was
packaged. Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
Specifications are subject to change without notice. Trademarks
are the property of Koninklijke Philips N.V or their respective
owners. TP Vision reserves the right to change products at any
time without being obliged to adjust earlier supplies accordingly.
The written material packaged with the TV and the manual
stored in the memory of the TV or downloaded from the Philips
website are believed to be adequate for the intended use of the
system.
The material in this manual is believed adequate for the intended
use of the system. If the product, or its individual modules or
procedures, are used for purposes other than those specified
herein, confirmation of their validity and suitability must be
obtained. TP Vision Europe B.V. warrants that the material itself
does not infringe any United States patents. No further warranty
is expressed or implied. TP Vision Europe B.V. cannot be held
responsible neither for any errors in the content of this
document nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted and
published on the Philips support website as soon as possible.
Terms of warranty Risk of injury, damage to TV or void of
warranty! Never attempt to repair the TV yourself. Use the TV
and accessories only as intended by the manufacturer. The
caution sign printed on the back of the TV indicates risk of
electric shock. Never remove the TV cover. Always contact
Philips TV Customer Care for service or repairs. Any operation
expressly prohibited in this manual, or any adjustments and
assembly procedures not recommended or authorised in this
manual, shall void the warranty. Pixel characteristics This
LCD/LED product has a high number of colour pixels. Although
it has effective pixels of 99.999% or more, black dots or bright
points of light (red, green or blue) may appear constantly on the
screen. This is a structural property of the display (within
common industry standards) and is not a malfunction. CE
compliance This product is in compliance with the essential
requirements and other relevant provisions of Directives
2006/95/EC (Low Voltage), 2004/108/EC (EMC) and
2011/65/EU (ROHS). Compliance with EMF TP Vision Europe
B.V. manufactures and sells many products targeted at
consumers which, like any electronic apparatus, in general have
the ability to emit and receive electromagnetic signals. One of
Philips’ leading Business Principles is to take all necessary health
and safety measures for our products, to comply with all
applicable legal requirements and to stay well within the Electro
Magnetic Field (EMF) standards applicable at the time of
producing the products. Philips is committed to develop,
produce and market products that cause no adverse health
effects. TP Vision confirms that, as long as its products are
handled properly for their intended use, they are safe to use
according to scientific evidence available today. Philips plays an
active role in the development of international EMF and safety
standards, enabling Philips to anticipate further developments in
standardisation for early integration in its products.
26.2
Copyrights and licenses
HDMI
HDMI®
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
Dolby
Dolby®
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
DTS 2.0 + Digital Out ™
DTS 2.0 + Digital Out™
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,487,535 and other U.S. and worldwide patents
issued and pending. DTS, the Symbol, and DTS and the Symbol
together are registered trademarks and DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software. © DTS, Inc.
92
All Rights Reserved.
Skype
Skype™
© 2013 Skype and/or Microsoft. The Skype name, associated
trade marks and logos and the "S" logo are trade marks of Skype
or related entities.
Skype is a trademark of Skype or its related companies.
Although this product has been tested and met our certification
standards for audio and video quality, it is not endorsed by
Skype, Skype Communications S.a.r.l. or any of their related
companies.
DLNA Certified®
© 2013 Digital Living Network Alliance. All rights reserved.
© 2013 DLNA. All rights reserved.
DTVi
The DTVi brand and logo are registered marks of Pontifical
Catholic University of Rio de Janeiro (PUC-Rio) and the Federal
University of Paraíba (UFPB).
Java
Java and all Java based trademarks are registered trademarks of
Oracle and/or its affiliates, in the United States and other
countries.
Microsoft
Windows Media
Windows Media is either a registered trademark or trademark of
Microsoft Corporation in the United States and/or other
countries.
Microsoft PlayReady
Content owners use Microsoft PlayReady™ content access
technology to protect their intellectual property, including
copyrighted content.
This device uses PlayReady technology to access PlayReady-
protected content and/or WMDRM-protected content. If the
device fails to properly enforce restrictions on content usage,
content owners may require Microsoft to revoke the device's
ability to consume PlayReady-protected content. Revocation
should not affect unprotected content or content protected by
other content access technologies. Content owners may require
you to upgrade PlayReady to access their content. If you decline
an upgrade, you will not be able to access content that requires
the upgrade.
Wi-Fi Alliance
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED
Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance.
MHEG software
The copyright in MHEG software ("the Software") comprised in
this television ("this product") and included to enable you to use
interactive television features is owned by S&T CLIENT
SYSTEMS LIMITED ("the Owner"). You are permitted to use the
Software only in conjunction with this product.
Kensington
Kensington and Micro Saver are registered US trademarks of
ACCO World Corporation with issued registrations and
93
pending applications in other countries throughout the world.
Other trademarks
All other registered and unregistered trademarks are the
property of their respective owners.
94
Index
3
3D backlight contrast 68
3D, 2D to 3D conversion 47
3D, health warning 47
3D, optimal viewing 47
A
Active control 68
Activity style 70
Ambilight+hue 74
Ambilight, Lounge light 75
Ambilight, mode 73
Ambilight, TV placement 7
Ambilight, TV switch off 75
Ambilight, wall colour 75
Amplifier, audio system 72
Antenna connection 8
Antenna connection, tips 12
App, gallery 64
App, rental videos 64
Apps, feedback 64
Apps, lock 66
Apps, open 68
Apps, recommended 70
Apps, search 72
Audio commentary 76
Audio description 78
Audio language 30
Audio Out - Optical 13
Audio to video sync 16
Auto subtitle shift 14
Auto surround 3D 71
Auto volume levelling 72
Automatic channel update 31
B
Backlight contrast 70
Bass 71
Blu-ray Disc, connect 17
Brightness 69
Brightness, word mark 23
C
CAM - Conditional Access Module 14
CAM, install 14
Channel list copy 32
Channel list copy 32
Channel lock 27
Channel package, update 38
Channel packages 37
Channel update message 33
Channel, favourite 26
Channel, options 27
Channel, problems 87
Channel, status 29
Channel, switch 26
Channels, rename 27
Channels, update 35
Child lock code 29
CI+ 16
Clear LCD 70
Clear sound 72
Clock 45
Colour 68
Colour, Colour enhancement 69
Colour, Colour temperature 69
Common Interface slot 16
Connectivity guide 12
Consumer Care 89
Contact Philips 91
Contrast 72
Contrast, Brightness 71
Contrast, Contrast modes 69
Contrast, Dynamic contrast 69
Contrast, Gamma 70
Contrast, Light sensor 70
Contrast, Video contrast 69
D
Digital Text 28
Disposal of TV or batteries 78
DVB (Digital Video Broadcast) 32
DVB, settings 33
DVI, connect 12
E
EasyLink 13
EasyLink, connection 14
EasyLink, settings 16
Eco settings 78
End of use 80
ESD 80
European Energy Label 78
F
Facebook 63
Favourite channel list 28
Frequency scan 33
G
Game console, connect 17
Game or computer 72
Game or computer, game 49
Game, play 51
Gamma 72
H
HbbTV 30
HD Natural Motion 70
HDCP, copy protection 16
HDMI ARC 12
HDMI CEC 15
HDMI connection, tips 18
Headphones 21
Headphones volume 72
Hearing impaired 76
Help 88
Home Theatre System, connect 16
Home Theatre System, multichannel 16
Home Theatre System, problems 17
95
Home Theatre System, sound 73
Home Theatre System, volume leveling 17
I
Incredible surround 71
Infrared sensor 25
Interactive TV, about 30
Interactive TV, what you need 32
Internet memory, clear 10
Internet memory, clear 65
I
iTV 32
K
Keyboard, connect 19
L
Language, audio 32
Language, menus and messages 30
Language, original 34
Light sensor 72
Location 71
Lounge light 77
M
Manual installation 34
Media servers, supported 82
Menu language 32
Miracast, block/unblock 52
Miracast, share a screen 52
Miracast, stop sharing 52
Miracast™ 51
Motion, Clear LCD 72
Motion, HD Natural Motion 72
Mouse, connect 19
MPEG artefact reduction 70
Multi room, about 66
Multi room, setup 66
Multi room, use 66
Multi view 65
Music, playback 51
N
Network frequency 33
Network frequency mode 33
Network router 9
Network, DHCP 11
Network, password 13
Network, problems 10
Network, settings 12
Network, Static IP 15
Network, wired 10
Network, wireless 9
Noise reduction 70
O
On and Off 23
On screen Help 90
Online support 89
Online TV 65
Open source software 81
Options, on a channel 31
Original language 36
P
Parental rating 31
Pause TV 53
Philips hue 76
Photo camera, connect 20
Photos, slideshow 50
Photos, videos and music 50
Picture style 68
Picture, backlight contrast 74
Picture, colour 70
Picture, problems 87
Picture, sharpness 68
Pixel Plus link 18
Playback formats 84
Power connection 7
Power consumption, check 80
Q
Quick picture settings 67
R
Radio channel 28
Reception quality 33
Recording, list of recordings 54
Recording, record now 54
Recording, schedule a recording 54
Recording, Skype calls 59
Recording, watch a 55
Recording, what you need 54
Recording, what you need 18
Red button 34
Rename channels 29
Rental videos 66
Repair 93
S
Safety instructions 90
Satellite, add 38
Satellite, age rating 36
Satellite, channel list 35
Satellite, channel update 39
Satellite, connection 8
Satellite, hearing impaired 40
Satellite, installation 37
Satellite, lock channels 36
Satellite, Multi-Dwelling-Unit 37
Satellite, packages 39
Satellite, remove 39
Satellite, rename channels 39
Satellite, Unicable 38
SCART connection, tips 13
Screen care 91
Screen off 82
Screen off 53
Sharpness 70
Sharpness, MPEG artefact reduction 72
Sharpness, Noise reduction 72
Sharpness, super resolution 70
Shop location 73
Skype, auto sign in 60
Skype, camera zoom, pan and tilt 61
Skype, contacts 58
Skype, during recording 61
Skype, install camera 56
Skype, menu 57
Skype, Microsoft account 57
96
Skype, missed calls 59
Skype, new account 56
Skype, receiving a call 63
Skype, rental movies and Pause TV 65
Skype, sign in 56
Skype, video call 59
Skype, voice call 59
Skype, what you need 56
Skype™, what 56
Sleep timer 45
Smart TV, about 63
Smart TV, internet 74
Smart TV, Multi view 67
Smart TV, open 65
Smart TV, overview 63
Smart TV, PIN code 63
Smart TV, register 65
Smart TV, start page 65
Sound style 71
Sound, problems 88
Standby 25
Subtitles 29
Subtitles, pause TV 55
Subtitles, recording 54
Support, online 91
Surround mode 73
Switch off timer 45
Switching on 27
Symbol rate 33
Symbol rate mode 35
Synchronise audio and video 18
T
Teletext 30
Text 32
Treble 71
TV clock 47
TV guide 43
TV guide, clock 49
TV network name 14
TV on Demand 67
TV placement 73
TV speakers 74
Twitter 67
U
Unicable 40
Universal access 76
Universal access, audio effect 76
Universal access, hearing impaired 78
Universal access, mixed volume 76
Universal access, Speakers / Headphones 76
Universal access, speech 76
USB flash drive, connect 20
USB Hard Drive, disc space 20
USB Hard Drive, installation 19
USB keyboard 21
USB mouse 21
V
Video selection 33
Videos, playback 51
Viewing distance 9
Visually impaired 80
W
Watch TV 30
Wi-Fi 11
Wi-Fi Certified Miracast™ 53
Wired network 12
Wireless installation 17
Word mark, brightness 25
World Wide Web 76
WPS - PIN code 19
WPS - Wi-Fi Protected Setup 21
Y
YPbPr connection, tips 12
97
Contact information
Argentina
0800 444 7749
Buenos Aires 0810 444 7782
België / Belgique
070 700 035 (0,15€/min.)
Bosna i Hercegovina
033 941 251 (Lokalni poziv)
Brazil
0800 701 0245
Sao Paulo 2938 0245
Бълария
02 4916 273 (Национален номер)
Česká republika
228880895 (Místní tarif)
Danmark
3525 8314
Deutchland
0180 501 04 69 (0,14€/Min.)
Ελλάδα
2111983028 (Εθνική κλήση)
España
902 88 10 83 (0,10€ + 0,08€/min.)
Estonia
6683061 (Kohalikud kõned)
France
01 57 32 40 50 (local)
Hrvatska
01 777 66 01 (Lokalni poziv)
Italia
0245 28 70 14 (chiamata nazionale)
Ireland
0818 210 140 (national call)
Northern Ireland
0844 338 04 88 (5p/min BT landline)
Kaзaкcтaн
8 10 800 2000 00 04 (free)
Latvia
6616 3263 (Vietējais tarifs)
Lithuania
8 5 214 0293 (Vietinais tarifais)
Luxembourg / Luxemburg
2487 1100 (Nationale Ruf / appel national)
Magyarország
06 1 700 8151 (Belföldi hívás)
Nederland
0900 202 08 71 (0,10€/min.)
Norge
22 97 19 14
Österreich
0820 40 11 33 (0,145€/Min.)
Polska
22 397 15 04 (Połączenie lokalne)
Portugal
707 78 02 25 (0,12€/min. - Móvel
0,30€/min.)
Romānä
031 6300042 (Tarif local)
Россия
8-800-22 00004 (бесплатно)
Suisse / Schweiz / Svizzera
0848 000 291 (0,081 CHF/Min.)
Србија
011 321 6840 (Lokalni poziv)
Slovakia
2 332 154 93 (Vnútroštátny hovor)
Slovenija
1 888 83 12 (Lokalni klic)
Suomi
09 88 62 50 40
Sverige
08 5792 9096 (lokalsamtal)
ประเทศไทย (Thailand)
02 652 7650
Türkiye
444 8 445
United Kingdom
0844 338 04 88 (5p/min BT landline)
Україна
0-800-500-480 (безкоштовно)
www.philips.com/support
Non-contractual images / Images non contractuelles / Außervertragliche Bilder
Specifications are subject to change without notice.
Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V.
and are used under license from Koninklijke Philips Electronics N.V.
All registered and unregistered trademarks are property of their respective owners.
2014 © TP Vision Europe B.V. All rights reserved.
www.philips.com
Powered by TCPDF (www.tcpdf.org)
98