Table of Contents
- Contents
- 1 - My new TV
- 2 - Setting up
- 3 - Network
- 4 - Connect devices
- 4.1 - About Connections
- 4.2 - HDMI Ports
- 4.3 - Y Pb Pr - Component
- 4.4 - CVBS - Audio L R
- 4.5 - Audio Out - Optical
- 4.6 - Receiver - Set-Top Box
- 4.7 - Home Theater System - HTS
- 4.8 - Smartphones and Tablets
- 4.9 - Blu-ray Disc Player
- 4.10 - DVD Player
- 4.11 - Headphones
- 4.12 - Game Console
- 4.13 - USB Hard Drive
- 4.14 - USB Keyboard
- 4.15 - USB Flash Drive
- 4.16 - Photo Camera
- 4.17 - Camcorder
- 4.18 - Computer
- 5 - Switching On and Off
- 6 - Remote control
- 7 - Channels
- 8 - TV guide
- 9 - Recording and Pause TV
- 10 - Home menu
- 11 - Utilities
- 12 - Netflix
- 13 - Sources
- 14 - Internet
- 15 - Movies, photos and music
- 16 - Smartphones and tablets
- 17 - Multi room
- 18 - Settings
- 19 - Networks
- 20 - Channel installation
- 21 - Software
- 22 - Specifications
- 23 - Troubleshooting and support
- 24 - Safety and care
- 25 - Terms of use, copyrights and licenses
- 26 - Copyrights
- 27 - Disclaimer regarding services and/or software offered by third parties
- Index
Philips 49PFG5102/77 User Manual
Displayed below is the user manual for 49PFG5102/77 by Philips which is a product in the TVs category. This manual has pages.
Related Manuals
Register your product and get support at 5102 series
www.philips.com/welcome
User Manual
32PHG5102
43PFG5102
49PFG5102
Contents
1 My new TV 4
1.1 Smart TV 4
1.2 App gallery 4
1.3 Rental videos 4
1.4 Social Networks 4
1.5 Pause TV and recordings 4
2 Setting up 5
2.1 Read safety 5
2.2 TV stand and wall mounting 5
2.3 Tips on placement 5
2.4 Power cable 5
2.5 Antenna cable 5
3 Network 6
3.1 Network and Internet 6
4 Connect devices 9
4.1 About Connections 9
4.2 HDMI Ports 9
4.3 Y Pb Pr - Component 10
4.4 CVBS - Audio L R 10
4.5 Audio Out - Optical 11
4.6 Receiver - Set-Top Box 11
4.7 Home Theater System - HTS 11
4.8 Smartphones and Tablets 12
4.9 Blu-ray Disc Player 12
4.10 DVD Player 13
4.11 Headphones 13
4.12 Game Console 13
4.13 USB Hard Drive 14
4.14 USB Keyboard 15
4.15 USB Flash Drive 16
4.16 Photo Camera 16
4.17 Camcorder 16
4.18 Computer 16
5 Switching On and Off 18
5.1 On or standby 18
5.2 Keys on TV 18
5.3 Sleep timer 18
6 Remote control 19
6.1 Key overview 19
6.2 Keyboard 20
6.3 IR sensor 20
6.4 Batteries 21
6.5 Cleaning 21
7 Channels 22
7.1 Install Channels 22
7.2 Switch channels 22
7.3 Channel lists 22
7.4 Watching channels 23
7.5 Favorite Channels 24
7.6 Closed captioning (CC) and language 25
8 TV guide 26
8.1 What you need 26
8.2 TV guide data 26
8.3 Using the TV guide 26
9 Recording and Pause TV 28
9.1 Recording 28
10 Home menu 30
10.1 About the Home menu 30
10.2 Open the Home menu 30
11 Utilities 31
11.1 About Utilities 31
12 Netflix 32
12.1 About Netflix 32
13 Sources 33
13.1 Switch to a device 33
13.2 Options for TV Input 33
13.3 Scan connections 33
13.4 Game or computer 33
14 Internet 34
14.1 Start Internet 34
14.2 Internet Options 34
15 Movies, photos and music 35
15.1 From a USB connection 35
15.2 From a computer 35
15.3 Menu bar and sorting 35
15.4 Play your movie 35
15.5 View your photos 35
15.6 Play your music 36
16 Smartphones and tablets 37
16.1 Miracast 37
16.2 MHL 38
16.3 Smart TV 38
17 Multi room 42
17.1 About Multi room 42
17.2 What you need 42
17.3 Using Multi room 42
18 Settings 43
18.1 Quick settings 43
18.2 Picture 43
18.3 Sound 46
18.4 Eco settings 49
18.5 General settings 49
18.6 Clock and language 51
18.7 Universal Access 52
19 Networks 54
20 Channel installation 55
20.1 Antenna/cable installation 55
20.2 Channel list copy 55
20.3 Digital Channel Installation 56
20.4 Service Navigation 56
21 Software 57
21.1 Update software 57
21.2 Software version 57
21.3 Local updates 57
21.4 Open source software 57
21.5 Open source license statement 58
21.6 Open-source license 58
22 Specifications 69
22.1 Environmental 69
22.2 Power 69
22.3 Reception 69
22.4 Display 69
2
22.5 Dimensions and Weights 70
22.6 Connectivity 70
22.7 Sound 70
22.8 Multimedia 70
23 Troubleshooting and support 72
23.1 Register your TV 72
23.2 Help 72
23.3 Troubleshooting 72
23.4 Online help 74
23.5 Consumer care/Repair 74
24 Safety and care 75
24.1 Safety 75
24.2 Screen care 76
25 Terms of use, copyrights and licenses
77
25.1 Terms of use 77
26 Copyrights 78
26.1 Dolby 78
26.2 MHL 78
26.3 HDMI 78
26.4 DTS 2.0 + Digital Out ™ 78
26.5 Microsoft 78
26.6 Wi-Fi Alliance 78
26.7 Kensington 78
26.8 Other trademarks 78
27 Disclaimer regarding services and/or
software offered by third parties 80
Index 81
3
1
My new TV
1.1
Smart TV
Connect this Philips Smart LED TV to the Internet
and discover a new world of television. You can install
a wired connection to your router or you can link up
wirelessly with Wi-Fi.
With the TV connected to your home network, a
smartphone can show a photo on TV, you can play
videos stored on your computer or control the TV with
your tablet.
With your TV connected to the Internet, you can
watch a rental video from an online video store, read
the online TV guide or record your favorite TV show
on a USB Hard Drive.
The Smart TV Apps add to the fun with all sorts of
entertainment and convenient services.
In Help, press Keywords and look up Smart
TV for more information.
1.2
App gallery
Open the App gallery in Smart TV to browse the
Apps, the collection of tailored websites for TV.
There are Apps for renting videos from an online
video store and Apps for watching programs you
missed.
If the App gallery does not have what you are looking
for, try the World Wide Web and surf the Internet on
TV.
In Help, press Keywords and look up App
gallery for more information.
1.3
Rental videos
You don't need to leave your home to watch a rental
video. Simply rent the latest movie from your regional
online video store.
Start Smart TV and add the video store App to the
Smart TV start page.
Open the video store App, create your personal
account, select the movie and press play. No fuss
with downloading, you can watch the
movie immediately*.
In Help, press Keywords and look up Rental
videos for more information.
* Depending on the video streaming service of the
selected video store.
1.4
Social Networks
No need to get up to check your friend's messages on
your computer.
On this TV, you get the messages from your social
networks on your TV screen. You can send a return
message from your couch.
For more information, in Help, press the color
key Keywords and look up Apps.
1.5
Pause TV and recordings
If you connect a USB Hard Drive, you can pause and
record a broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or
simply take a break during a sports match, while the
TV stores the broadcast on the USB Hard Drive. You
can watch it again later.
With a USB Hard Drive connected, you can also
record digital broadcasts. You can record while you
are watching a program or schedule a recording of an
upcoming program.
For more information, in Help, press the color
key Keywords and look up Pause
TV or Recording.
4
2
Setting up
2.1
Read safety
Read the safety instructions first before you use the
TV.
To read the instructions, in Help, press the color
key Keywords and look up Safety instructions.
2.2
TV stand and wall mounting
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
• For 32-inch TV: VESA MIS-F 100x100, M4
• For 43-inch TV: VESA MIS-F 200x200, M6
• For 49-inch TV: VESA MIS-F 400x200, M6
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
2.3
Tips on placement
• Position the TV where light does not shine directly
on the screen.
• Position the TV up to 6 inches away from the wall.
• The ideal distance to watch TV is 3 times its diagonal
screen size. When seated, your eyes should be level
with the center of the screen.
2.4
Power cable
• Insert the power cable into the POWER connector
on the back of the TV.
• Make sure the power cable is securely inserted in
the connector.
• Make sure that the power plug, in the wall socket, is
accessible at all times.
• When you unplug the power cable, always pull the
plug, never pull the cable.
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
For more information, in Help, press the color
key Keywords and look up Switching on for
more information.
2.5
Antenna cable
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
5
3
Network
3.1
Network and Internet
Home network
To enjoy the full capabilities of your TV, your TV must
be connected to the Internet.
Connect the TV to a home network with a high-speed
Internet connection. You can connect your TV
wirelessly or wired to your network router.
Connect to network
Wireless connection
What you need
To connect the TV to the Internet wirelessly, you need
a Wi-Fi router with a connection to the Internet.
Use a high-speed (broadband) Internet connection.
Make the connection
To make a wireless connection…
Step 1 - Make sure that the router of your wireless
network is turned on.
Step 2 - Press , select Network and press
(right) to enter the menu.
Step 3 - Select Connect to network > Start now and
press OK.
Step 4 - Select Connect and press OK.
Step 5 - Select Wireless and press OK.
Step 6 - Select Scan to scan for your wireless
network. If you have a router with WPS (Wi-Fi
Protected Setup), you can select WPS. Select your
choice and press OK.
• Scan
Select Scan to scan for your wireless network (your
wireless router). The TV might find several wireless
networks in your proximity.
• WPS
If your router has WPS, you can directly connect to
the router without scanning. Go to the router, press
the WPS button and return to the TV within 2 minutes.
Then press Connect to make the connection.
If you have devices in your wireless network that use
the WEP security encryption system, you cannot use
WPS.
If you must use the WPS PIN code to connect, select
Scan instead of WPS.
Step 7 - From the list of networks found, select your
wireless network and press OK.
If your network is not in the list because the network
name is hidden (you turned off the SSID broadcast of
the router), select Manual entry to enter the network
name yourself.
Step 8 - Depending on the type of router, you can
now enter your encryption key (WEP, WPA or WPA2).
If you have entered the encryption key for this
network before, you can select Next to make the
connection immediately.
If your router supports WPS or WPS PIN, you select
WPS, WPS PIN or Standard. Select your choice and
press OK.
• Standard
Select Standard to enter the encryption key
(password, passphrase, or security key) manually. You
can use the keyboard on the remote control to enter
the encryption key. Once you have entered the key,
press Connect.
• WPS PIN
To make a secured WPS connection with a PIN code,
select WPS PIN and press OK. Write down the 8-digit
PIN code shown and enter it in the router software on
your PC. Return to the TV and press Connect. Consult
the router manual on where to enter the PIN code in
the router software.
Step 9 - A message will be shown when the
connection is successful.
Problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for
6
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
Wired connection
What you need
To connect the TV to the Internet, you need a
network router with an internet connection.
Use a high-speed (broadband) Internet connection.
Make the connection
To make a wired connection…
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is turned on.
3 - Press , select Network and press (right) to
enter the menu.
4 - Select Connect to network > Start now and
press OK.
5 - Select Connect and press OK.
6 - Select Wired and press OK. The TV constantly
searches for the network connection.
7 - A message will be shown when the connection is
successful.
If the connection fails, you can check the DHCP
setting of the router. DHCP should be switched on.
Network settings
View network settings
You can view all current network settings here. The
IP and MAC address, signal strength, speed,
encryption method, etc.
To view the current network settings…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select View network settings and press OK.
3 - Select Close to close the menu.
Network configuration
If you are an advanced user and want to install your
network with Static IP addressing, set the TV to Static
IP.
To set the TV to Static IP…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Network configuration and press OK.
3 - Select Static IP and press OK to enable Static
IP configuration.
4 - Select Static IP configuration and configure the
connection.
5 - You can set the number for IP
address, Netmask, Gateway, DNS 1, or DNS 2.
6 - Press (left) repeatedly if necessary, to close
the menu.
Switch On with Wi-Fi (WoWLAN)
You can switch this TV on from your smartphone or
tablet if the TV is on Standby. The setting Switch On
with Wi-Fi (WoWLAN) must be switched on.
To switch on WoWLAN…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Switch on with Wi-Fi (WoWLAN) and
press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Digital Media Renderer - DMR
If your media files do not play on your TV, make sure
that the Digital Media Renderer is turned on. As a
factory setting, DMR is turned on.
To switch on DMR…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Digital Media Renderer - DMR and
press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
7
Switch on Wi-Fi connection
You can switch the Wi-Fi connection on your TV on
or off.
To switch on Wi-Fi…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Wi-Fi On/Off and press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Switch on Wi-Fi Miracast
Enable Wi-Fi Miracast to share the screen of your
smartphone, tablet, or computer on the TV.
To switch on Miracast…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Wi-Fi Miracast and press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
For more information, in Help, press the color
key Keywords and look up Miracast™, switch
on.
Reset Wi-Fi Miracast connections
Clear the list of connected and blocked devices that
are used with Miracast.
To clear Miracast connections…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Reset Wi-Fi Miracast connections and
press OK.
3 - Select Clear all and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
TV network name
If you have more than one TV in your home network,
you can give the TV a unique name.
To change the TV name…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select TV network name and press OK.
3 - Enter the name with the on-screen keyboard.
4 - Select Done to confirm the change.
5 - Press (left) repeatedly if necessary, to close
the menu.
Netflix settings
With Netflix settings, you can view the ESN number
or deactivate a Netflix device.
To enter Netflix settings…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Netflix settings and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Clear Internet memory
With Clear Internet Memory, you can clear all
Internet files and logins stored on your TV, such as
passwords, cookies, and history.
To clear the Internet memory…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Clear Internet memory and press OK.
3 - Select OK to confirm.
4 - Press (left) repeatedly if necessary, to close
the menu.
File sharing
The TV can connect to other devices in your wireless
network, like your computer or smartphone. You can
use a computer with Microsoft Windows or Apple OS
X.
On this TV, you can open photos, music and videos
stored on your computer.
8
4
Connect devices
4.1
About Connections
Connectivity Guide
Always connect a device to the TV with the highest
quality connection available. Also, use high quality
cables to ensure good transfer of picture and sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The
guide offers information on how to connect and
which cables to use.
Go to www.connectivityguide.philips.com
Antenna Port
If you have a Set-top box (a digital receiver) or
Recorder, connect the antenna cables to run the
antenna signal through the Set-top box and/or
Recorder first before it enters the TV. In this way, the
antenna and the Set-top box can send possible
additional channels to the Recorder to record.
4.2
HDMI Ports
HDMI Quality
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for TV signal.
For best signal quality transfer, use a High speed
HDMI cable and do not use an HDMI cable longer
than 5 m.
Copy protection
HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
Management).
HDMI ARC
Only HDMI 3 on the TV has HDMI ARC (Audio
Return Channel).
If the device, typically a Home Theater System (HTS),
also has the HDMI ARC connection, connect it to
the HDMI 3 connection on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the TV sound to the HTS.
The HDMI ARC connection combines both signals.
HDMI MHL
With HDMI MHL, you can send what you see on your
Android smartphone or tablet to a TV screen.
The HDMI 1 connection on this TV
incorporates MHL 2.0 (Mobile High-Definition Link).
This wired connection offers great stability and
bandwidth, low latency, no wireless interference and
good quality sound reproduction. On top of that, the
MHL connection will charge the battery of your
smartphone or tablet. Although connected, your
mobile device will not be charging when the TV is on
standby.
Inform yourself regarding which passive MHL cable is
suited for your mobile device. In particular, with the
9
HDMI connector for the TV on one side, the type of
connector you need to connect to your smartphone
or tablet.
MHL, Mobile High-Definition Link and the MHL Logo
are trademarks or registered trademarks of the MHL,
LLC.
HDMI CEC - EasyLink
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for High Definition (HD) or
TV signals. For best signal quality transfer, use a High
speed HDMI cable and do not use an HDMI cable
longer than 16.4 ft (5 m).
EasyLink HDMI CEC
If your devices are connected with HDMI and have
EasyLink, you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched On on
the TV and the connected device.
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theater Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.
Example HDMI CEC branding names are property of
their respective owners.
DVI to HDMI
If you still own a device that only has a DVI
connection, you can connect the device to any of
the HDMI connections with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use one of the HDMI connections
and add an Audio L/R cable (mini-jack 3.5mm) to
Audio In for sound on the back of the TV.
Copy Protection
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
4.3
Y Pb Pr - Component
Y Pb Pr - Component Video is a high quality
connection.
The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals, add
the Audio Left and Right signals for sound.
Match the YPbPr (green, blue, red) connector colors
with the cable plugs when you make the connections.
Use an Audio L/R cinch cable if your device also has
sound.
10
4.4
CVBS - Audio L R
CVBS - Composite Video is a high quality
connection. Next to the CVBS signal, add the Audio
Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.5
Audio Out - Optical
Audio Out - SPDIF is a high quality sound connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theater System
(HTS), has no HDMI ARC connection, you can use this
connection with the SPDIF connection on the HTS.
The SPDIF connection sends the sound from the TV
to the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theater System.
For more information, in Help, press the color
key Keywords and look up Audio out settings.
If the sound does not match the video on screen, you
can adjust the audio to video synchronization.
For more information, in Help, press the color
key Keywords and look up Audio to video sync.
4.6
Receiver - Set-Top Box
Cable Box
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Switch Off Timer
Switch off this automatic timer if you only use the
remote control for the Set-top box. Switching this
timer off prevents the TV from switching off
automatically after a 4-hour period without a key
press on the TV's remote control.
For more information, in Help, press the color
key Keywords and look up Switch off timer for
more information.
4.7
Home Theater System - HTS
11
Connect with HDMI ARC
Use an HDMI cable to connect a Home Theater
System (HTS) to the TV. You can connect an HTS with
a built-in disc player.
HDMI ARC
If your Home Theater System has an HDMI ARC
connection, you can use HDMI 3 on the TV to
connect. With HDMI ARC, you do not need to
connect the extra audio cable. The HDMI ARC
connection combines both signals.
HDMI 3 on the TV can offer the Audio Return
Channel (ARC) signal, but once you have connected
the Home Theater System, the TV can only send the
ARC signal to this HDMI connection.
Audio to video synchronization (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theater Systems with
a disc player to match the sound with the video.
For more information, in Help, press the color
key Keywords and look up Audio to video sync.
Connect with HDMI
Use an HDMI cable to connect a Home Theater
System (HTS) to the TV. You can connect an HTS with
a built-in disc player.
If the Home Theater System has no HDMI ARC
connection, add an SPDIF cable to send the TV's
sound to the Home Theater System.
Audio to video synchronization (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theater Systems with
a disc player to match the sound with the video.
For more information, in Help, press the color
key Keywords and look up Audio to video sync.
Problems with HTS sound
Sound with loud noise
If you watch a video from a connected USB flash
drive or computer, the sound from your Home
Theater System might be distorted. This noise is heard
when the audio or video file has DTS sound, but the
Home Theater System has no DTS sound processing.
You can fix this by setting the Audio out format of
the TV to Stereo.
Press for Sound > Advanced > Audio out
format.
No sound
If you cannot hear the sound from the TV on your
Home Theater System, check if you connected the
HDMI cable to an HDMI3 ARC connection on the
Home Theater System.
4.8
Smartphones and Tablets
To connect a smartphone or tablet to the TV, you can
use a wired connection.
Wired
For a wired connection, use the HDMI 1 MHL
connection on the back of the TV. In Help, press the
color key Keywords and look up HDMI
MHL for more information.
12
4.9
Blu-ray Disc Player
Use a High speed HDMI cable to connect the Blu-
ray Disc player to the TV.
4.10
DVD Player
Use an HDMI cable to connect the DVD player to the
TV.
4.11
Headphones
You can connect a set of headphones to
the connection on the back of the TV. The
connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
To adjust the volume…
1 - Press , select Sound > Headphones
volume and press OK.
2 - Press the arrows (up) or (down) to adjust
the value.
3 - Press (left) repeatedly if necessary, to close
the menu.
4.12
Game Console
HDMI
For best quality, connect the game console with a
high-speed HDMI cable to the TV.
Y Pb Pr - Component
Connect the game console with a component video
cable (Y Pb Pr) and an audio L/R cable to the TV.
CVBS - Audio L R
CVBS - Composite Video is a high quality
connection. Next to the CVBS signal, add the Audio
Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
13
Best Setting
Before you start playing a game from a connected
game console, we suggest you set the TV to the
ideal Game setting.
When you finish playing a game and start watching
TV again, remember to switch the Game or
Computer setting back to Off.
To set the TV to the ideal setting…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Game or Computer, and
select the device type you want to use. To switch
back to TV, select Off.
3 - Press (left) repeatedly if necessary, to close
the menu.
4.13
USB Hard Drive
What You Need
If you connect a USB Hard Drive, you can pause or
record a TV broadcast. The TV broadcast must be a
digital broadcast (DVB broadcast or similar).
To Pause
To pause a broadcast, you need a USB-compatible
Hard Drive with a minimum of 4GB of disk space.
To Record
To pause and record a broadcast, you need a
minimum of 250GB disk space. If you want to record
a broadcast with TV guide data from the Internet, you
need to have the Internet connection installed on
your TV before you install the USB Hard Drive.
For more information on how to install a USB Hard
Drive, in Help, press the color
key Keywords and look up USB hard drive,
installation.
Installation
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
Formatting
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard
Drive. If you want to record broadcasts with TV Guide
data from the Internet, you must setup the Internet
connection first before you install the USB Hard Drive.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
To format a USB Hard Drive…
14
1 - Connect the USB Hard Drive to one of the USB
connections on the TV. Do not connect another USB
device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting. Follow the on-screen instructions.
4 - The TV will ask if you want to use the USB Hard
Drive to store apps. Select Agree if you do.
5 - When the USB Hard Drive is formatted, leave it
connected permanently.
Formatting
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
To format a USB Hard Drive…
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting. Follow the instructions on screen.
4 - The TV will ask if you want to use the USB Hard
Drive to store apps. Select Agree if you do.
5 - When the USB Hard Drive is formatted, leave it
connected permanently.
4.14
USB Keyboard
Connect
Connect a USB keyboard (USB-HID type) to enter text
on your TV.
Use one of the USB connections to connect.
Configure
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard layout first, you
can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout
was selected…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select USB keyboard settings, and press OK to
start the keyboard setup.
Special Keys
Keys for entering text
• Enter key = OK
• Backspace = delete character before cursor
• Arrow keys = navigate within a text field
• To switch between keyboard layouts, if a secondary
15
layout is set, press the Ctrl + Spacebar keys
simultaneously.
Keys for apps and Internet pages
• Tab and Shift + Tab = Next and Previous
• Home = scroll to the top of the page
• End = scroll to the bottom of the page
• Page Up = jump one page up
• Page Down = jump one page down
• + = zoom in one step
• - = zoom out one step
• * = fit the web page to the screen width
4.15
USB Flash Drive
You can view photos or play your music and movie
from a connected USB flash drive.
Insert a USB flash drive in one of
the USB connections on the TV while the TV is
switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press SOURCES and select USB.
To stop watching the USB flash drive content,
press EXIT or select another activity.
To disconnect the USB flash drive, you can pull out
the flash drive anytime.
For more information on watching or playing content
from a USB flash drive, in Help, press the color
key Keywords and look up Photos, movie and
music.
4.16
Photo Camera
To view photos stored on your digital photo camera,
you can connect the camera directly to the TV.
Use one of the USB connections on the TV to
connect. switch on the camera after you have made
the connection.
If the contents list does not appear automatically,
press SOURCES , and select USB.
Your camera might need to be set to transfer its
content with PTP (Picture Transfer Protocol). Read
the user manual of the digital photo camera.
For more information on viewing photos, in Help,
press the color key Keywords and look
up Photos, movie and music.
4.17
Camcorder
HDMI
For best quality, use an HDMI cable to connect the
camcorder to the TV.
Audio Video LR
You can use an HDMI or YPbPr connection to connect
your camcorder.
4.18
Computer
16
Connect
You can connect your computer to the TV and use
the TV as a PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the
TV.
Ideal Setting
If you connect a computer, we advise you to give the
connection, to which the computer is connected, the
correct device type name in the Source menu. If you
then switch to Computer in the Source menu, the TV
is automatically set to the ideal settings for a
computer.
You can manually switch the ideal setting to Off for
watching TV or Game for playing a game from a
connected game console (remember to switch back
to Off when you stop playing a game).
If you switch to a source and change the Game or
Computer setting, it will be stored for this selected
source.
To set the TV to the ideal setting…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Game or computer, and
press OK.
3 - Select Game (for gaming) or
select Computer (for watching a movie).
4 - Press (left) repeatedly if necessary, to close
the menu.
Remember to set Game or computer setting
to Off when you stop playing the game.
17
5
Switching On and
Off
5.1
On or standby
Before you switch on the TV, make sure you plugged
the POWER connector into the mains power
connector on the back of the TV.
With the TV in Standby, press on the remote
control to switch the TV on. You can also press the
small joystick key on the back of the TV to switch the
TV on in case you can't find the remote control or its
batteries are empty.
Switch to standby
To switch the TV to standby, press on the remote
control. You can also press the small joystick key on
the back of the TV.
In standby mode, the TV is still connected to the
mains power but consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
5.2
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…
1 - With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2 - Press left or right to select Volume,
Channel or Sources. Select Demo, to start a
demo movie.
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection. Press the joystick key to start the demo
movie.
4 - The menu will disappear automatically.
To switch the TV on standby, select and press the
joystick key.
5.3
Sleep timer
With the Sleep Timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep Timer…
1 - Press , select General settings > Sleep
timer and press OK.
2 - With the slider bar you can set the time up to 180
minutes in 5-minute increments. If set to 0 minutes,
the Sleep Timer is switched off. You can always
switch off your TV earlier or reset the time during the
countdown.
3 - Press BACK to close the menu.
18
6
Remote control
6.1
Key overview
Top
1 - Standby / On
To switch the TV On or back to Standby.
2 - INFO
To open or close program info.
3 - MULTI VIEW
To open another small TV channel screen in the
corner of the TV screen. This function enables users to
watch a TV channel while TV is in a Smart TV App or
on the Internet.
4 - TV GUIDE
To open or close the TV guide.
5 - SOURCES
To open or close the Sources menu - the list of
connected devices.
6 - SETTINGS
To open the Settings menu.
7 - EXIT
To switch back to watching TV.
8 - LIST
To open or close the channel list.
9 - SMART TV
To open the Smart TV start page.
10 - SEARCH
To open the Popular searches page.
Middle
1 - Arrow / navigation keys
To navigate up, down, left or right.
2 - OK key
To confirm a selection or setting.
3 - BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
To go back to the previous Smart TV page.
4 - Color keys
Follow the on-screen instructions.
5 - Volume
To adjust the volume level.
6 - HOME
To open or close the home menu.
7 - OPTIONS
To open or close the Options menu.
8 -
To open the NETFLIX menu.
9 - Channel
To switch to the next or previous channel in the
channel list.
10 - Mute
To mute the sound or to restore it.
Bottom
19
1 - Number keys and text keypad
To select a TV channel directly or to enter text.
2 - CC
To switch subtitles on, off, or on during mute.
3 - Playback and record keys
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Forward , to fast forward
• Record , to record now
4 - (Dot)
To enter digital sub-channels.
6.2
Keyboard
Overview
Overview of a keyboard.
1 - Character
Character position.
2 - Shift
To type uppercase characters.
3 - .com
Quick key to enter .com.
4 - Fn key
To type a number or punctuation character.
5 - Spacebar
Enter a space.
6 - Navigation and OK
Navigate through the menus, and confirm a selection.
7 -
Delete the character in front of the text cursor.
8 - Share this
To share online what you are now watching.
Writing text
With the keyboard on the back of the remote control,
you can write text in any text field on screen. Turn the
keyboard facing upwards to activate the keyboard
keys. Hold the remote control with two hands and
type with both thumbs.
Enter text
• To enter text into a text field, select the text field and
start typing. Press OK to confirm the text.
Uppercase and lowercase
• To type an uppercase character, press the
(Shift) key just before you type the character.
• To type several uppercase characters consecutively,
press and hold the key while typing.
• To type uppercase constantly, press the key for
2 seconds to switch the keyboard in uppercase mode.
• To switch out of uppercase mode, press the key
again. If no keys are pressed for 20 seconds,
uppercase mode switches off automatically. Also, if
you press another modifier key, such as Fn, you will
switch out of uppercase mode.
Numbers and punctuation characters
• To type a number or punctuation character, press
the Fn key just before you type the number or
punctuation character you need. You can turn the Fn
mode on or off as you would for the uppercase
mode.
Internet
• You can use the Fn key to enter www.
20
6.3
IR sensor
The TV can receive commands from a remote control
that uses infrared (IR) to send commands. If you use
this kind of remote control, always point it at the
infrared sensor on the front of the TV.
Warning
Do not put any objects in front of IR sensor of the TV
as it may block the IR signal.
6.4
Batteries
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the keyboard side of the remote
control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2 type AAA-
LR03-1.5V alkaline batteries. Make sure the + and the
- ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Please dispose your old batteries according to local
regulations.
6.5
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
21
7
Channels
7.1
Install Channels
For more information, in Help, press the color
key Keywords and look up Channel, Antenna
installation or Channel, Cable installation.
7.2
Switch channels
• To watch TV channels, press EXIT. The TV tunes to
the TV channel you last watched.
• Alternatively, press Home to open the Home
menu and select Channels and press OK.
• To switch channels, press + or -. If you
know the channel number, type in the number with
the number keys. Press OK after you entered the
number to switch channels.
• To switch back to the previous channel,
press BACK .
To switch to a channel from a channel list
While watching a TV channel, press LIST to open
the channel lists.
The channel list can have several pages with
channels. To view the next or previous page,
press + or -.
To close the channel lists without switching channels,
press LIST again.
Radio channels
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
7.3
Channel lists
About channel lists
After a channel installation, all channels appear the
channel list. Channels are shown with their name and
logo if this information is available.
For each type of tuner - Antenna or Cable - there is a
channel list with all installed channels. You can filter
this list to only show TV or only Radio channels.
With a channel list selected, you can only tune to the
channels in that list when
using or keys.
Channel icons
If you lock a channel, it will be marked with
a (lock).
Radio stations
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
Open a Channel List
Next to the list with all channels for each tuner,
Antenna or Cable, you can select a filtered list or you
can select one of the favorite lists you created.
To open the current channel list…
1 - Press EXIT to switch to TV.
2 - Press LIST to open the current channel list.
3 - Press LIST again to close the channel list.
Alternatively, you can select the list name at the top
of the channel list and press OK to open the list
menu.
Filter a Channel List
You can filter a list with all channels. You can set the
channel list to show only Digital TV channels or only
Analog channels.
To set a filter on a list with all channels…
1 - Press EXIT.
2 - Press LIST to open the current channel list.
3 - Press OPTIONS.
4 - Select Digital + Analog and press OK.
5 - Select the list you want to filter.
6 - In the Options menu, select the filter you want
and press OK to activate. The name of the filter
appears as part of the channel list name on top of the
channel list.
7 - Press (left) to go back one step or
press BACK to close the menu.
Search for a Channel
You can search for a channel to find it in a long list of
channels.
The TV can search for a channel within one of the
channel lists - the Antenna or Cable channel list.
To search for a channel…
1 - Press LIST to open the current channel list
and select All.
2 - Press OPTIONS.
3 - Select Digital + Analog and press OK.
22
4 - Select the list you want to filter and press OK.
5 - Press the color key (green) to
open Find Channel and press OK to open a text
field.
6 - Enter a number, a name, or part of a name,
select Done and press OK. The TV will search for
matching channel names in the list you selected.
Search results are listed as a channel list - see the list
name at the top. The search results disappear once
you select another channel list or close the list with
search results.
7.4
Watching channels
Tune to a channel
To start watching TV channels, press EXIT. The TV
tunes to the channel you last watched.
Switch Channels
To switch channels, press or .
If you know the channel number, type in the number
with the number keys. Press OK after you entered
the number to switch immediately.
Previous channel
To switch back to the previously tuned channel,
press BACK.
Child Lock/Lock a channel
Lock and unlock a channel
To prevent children from watching a channel, you can
lock a channel. To watch a locked channel, you must
enter the 4 digit Child Lock PIN code first. You
cannot lock programs from connected devices.
To lock a channel…
1 - Press EXIT.
2 - Press LIST to open the channel list. Change
the channel list if necessary.
3 - Select the channel you want to lock.
4 - Press OPTIONS and select Channel
lock and press OK.
5 - Enter your 4 digit PIN code if the TV asks for it. A
locked channel is marked with a (lock).
6 - Press (left) to go back one step or
press to close the menu.
To unlock a channel…
1 - Press EXIT.
2 - Press LIST to open the channel list. Change
the channel list if necessary.
3 - Select the channel you want to unlock.
4 - Press OPTIONS and select Unlock
Channel and press OK.
5 - Enter your 4 digit PIN code if the TV asks for it.
6 - Press (left) to go back one step or
press to close the menu.
If you lock or unlock channels in a channel list, you
only have to enter the PIN code just once until you
close the channel list.
For more information, in Help, press the color
key Keywords and look up Child Lock for more
information.
Age Ratings
To prevent children from watching a program not
suitable for their age, you can set an age rating.
Digital channels may have age-rated programs. When
the age rating of a program is equal to or higher than
the age rating you set for your child, the program will
be locked. To watch a locked program, you must
enter the Child Lock code first.
To set an age rating…
1 - Press , select Child Lock > Age ratings
lock and press OK.
2 - Enter a 4-digit Child lock code. If you have not
yet set a code, select Set code in Child lock. Enter a
4-digit Child lock code and confirm. You can now set
an age rating.
3 - Back in Age ratings lock, select the age and
press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
To switch off the parental age rating, select Free.
However, in some countries you must set an age
rating.
For some broadcasters/operators, the TV only locks
programs with a higher rating. The parental age
rating is set for all channels.
Content ratings
To set a content rating that will lock rated programs...
1 - Press , select Child lock and press (right)
to enter the menu.
2 - Select Content ratings lock.
3 - Set the content and press OK. The selected
content is blocked.
4 - Press (left) repeatedly if necessary, to close
the menu.
23
Set code/ Change code
The Child Lock PIN code is used to lock or unlock
channels or programs.
To set the lock code or to change the current code…
1 - Press , select Child Lock and press (right)
to enter the menu.
2 - Select Set code or Change code and
press OK.
3 - Enter a 4 digit code of your choice. If a code is set
already, enter the current Child Lock code and then
enter the new code twice.
4 - Press (left) repeatedly if necessary, to close
the menu.
The new code is set.
Forgotten your Child Lock PIN code?
If you forgot your PIN code, you can override the
current code and enter a new code.
1 - Press , select Child lock and press (right)
to enter the menu.
2 - Select Change code and press OK.
3 - Enter the overriding code 8888.
4 - Now enter a new Child Lock PIN code and enter it
again to confirm.
5 - Press (left) repeatedly if necessary, to close
the menu.
The new code is set.
Channel options
Open options
While watching a channel, you can set some options.
Depending on the type of channel you are watching
(analog or digital) or depending on your TV settings,
some options are available.
To open the options menu…
1 - While watching a channel, press OPTIONS.
2 - Press OPTIONS again to close.
Closed caption
Switch Closed Caption On or Off with this options.
Select On During Mute to show closed captions
only when the sound is muted with .
Caption service
Select the correct type of closed-caption services.
For more information, in Help,
press Keywords and look up Closed Caption.
Audio language
For digital broadcast, you can select an available
audio language temporarily if none of your preferred
languages are available.
For more information, in Help,
press Keywords and look up Audio language.
DTVi Applications
Display the list of Digital TV interactive applications.
For more information, in Help,
press Keywords and look up DTVi.
Status
You can view the technical characteristics of a
particular channel, like digital or analog, sound type,
etc.
To view the technical information on a channel…
1 - Tune to the channel.
2 - Press OPTIONS, select Status and
press OK.
3 - To close this screen, press OK.
Mono / Stereo
You can switch the sound of an analog channel to
Mono or Stereo.
To switch to Mono or Stereo…
1 - Tune to an analog channel.
2 - Press OPTIONS, select Mono/Stereo and
press (right).
3 - Select Mono or Stereo and press OK.
4 - Press (left) to go back one step or
press BACK to close the menu.
Share
Enables the user to share their activity with their
social networks.
7.5
Favorite Channels
24
About favorite Channels
In a favorite channel list, you can collect the channels
you like.
With a Favorites List selected, you can only tune to
the channels in that list when using
the or keys.
Set up your Favorites List
You can create a favorite channel list that only holds
the channels you want to watch. With the Favorite
channel list selected, you will only see your favorite
channels when you switch through channels.
Create your favorite channel list
1 - While watching a TV channel, press LIST to
open the channel list.
2 - Select All to view all channels.
3 - Select the channel, and press to mark as
favorite.
4 - The selected channel is marked with a .
5 - To finish, press BACK . The channels are
added to the Favorites list.
To remove a channel from the favorites list, select the
channel with , then press again to unmark as
favorite.
7.6
Closed captioning (CC) and
language
Closed Caption
You can display closed captions at all times or only
when the TV is muted.
To open Closed Caption, press CC.
Note:
• Not all TV programs, commercials, and features
include closed captioning information. See your local
TV program listings for channels with
closed captions. The captioned programs
are typically listed with service marks, such as "CC,"
in the TV listings.
Switch on closed caption
1 - While you watch TV, press OPTIONS.
2 - Select Closed Caption > On and press OK.
Select type of closed caption
1 - While you watch TV, press OPTIONS.
2 - Select Caption Service.
3 - Select the correct type of closed captions and
press OK.
Menu Language
To change the language of the TV menus and
messages…
1 - Press , select General
settings > Language > Menu language and
press OK.
2 - Select the language you want and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
25
8
TV guide
8.1
What you need
With the TV Guide you can view a list of the current
and scheduled TV programs of your channels.
Depending on where the TV guide information (data)
is coming from, analog and digital channels or only
digital channels are shown. Not all channels offer TV
Guide information.
The TV can collect TV Guide information for the
channels that are installed on the TV. The TV cannot
collect the TV Guide information for channels viewed
from a digital receiver or decoder.
8.2
TV guide data
The TV Guide receives information (data) from
broadcasters or from the Internet. In some regions
and for some channels, TV Guide information might
not be available. The TV can collect TV Guide
information for the channels that are installed on the
TV. The TV cannot collect the TV Guide information
from channels viewed from a digital receiver or
decoder.
The TV comes with the information set to From the
broadcaster.
If TV Guide information comes from the Internet, the
TV Guide can also list analog channels next to the
digital channels. The TV Guide menu also shows a
small screen with the current channel.
From the Internet
If the TV is connected to the Internet, you can set the
TV to receive the TV Guide information from the
Internet.
To set the TV Guide information…
1 - Press , select General Settings > TV
Guide > From the Internet and press OK.
2 - Press (left) repeatedly if necessary, to close
the menu.
Alternatively, you can access the TV Guide via
Utilities.
Missing recordings
When some recordings seem to have disappeared
from the list of recordings, the TV Guide info (data)
might have changed. Recordings made with the
setting From the broadcaster become invisible in
the list if you switch the setting to From the
Internet or vice versa. The TV might have switched
to From the Internet automatically.
To make the recordings available in the list of
recordings, switch to the setting that was selected
when the recordings were made.
8.3
Using the TV guide
Open the TV guide
To open the TV Guide, press TV GUIDE. The TV
Guide shows the channels of the selected tuner.
Press TV GUIDE again to close.
The first time you open the TV Guide, the TV scans all
TV channels for program information. This may take
several minutes. TV Guide data is stored on the TV.
Tune to a program
From the TV Guide, you can tune to a current
program.
To switch to the program (channel), select the
program and press OK.
View program details
To call up the details of the selected program…
1 - Press INFO.
2 - Press BACK to close.
Change day
The TV guide can show scheduled programs for the
upcoming days (maximum up to 8 days).
If the TV guide information comes from the
broadcaster, you can press + to view the
schedule of one of the next days. Press - to go
back to the previous day.
Alternatively, you can press OPTIONS and
select Change day.
Select Previous day, Today, or Next day and
press OK to select the day of the schedule.
The TV guide can show scheduled programs for the
upcoming days (maximum up to 8 days).
If the TV guide information comes from the
broadcaster, you can press + to view the
schedule for one of the next days. Press - to go
back to the previous day.
To change the day…
1 - Press TV GUIDE.
2 - Press OPTIONS.
26
3 - Select Change day, select Previous
day, Today or Next day and press OK.
4 - Press BACK to close the menu.
Set a reminder
You can set reminders that alert you of the start of a
program with a message on screen.
• To set a reminder, select the program in the
schedule and press for Set reminder. The
program is marked with a clock.
• To cancel the reminder, press the for Clear
reminder.
• To view a list of all reminders you have set,
press OPTIONS, and select All reminders.
Search by genre
If the information is available, you can look up
scheduled programs by genre like movies, sports, etc.
To search for programs by genre…
1 - Press TV GUIDE.
2 - Press OPTIONS.
3 - Select Search by genre and press OK.
4 - Select the genre you want and press OK. A list
with the found programs appears.
5 - You can set reminders or schedule a recording on
a selected program.
6 - Press BACK to close the menu.
Set a recording
You can set a recording in the TV Guide*.
To see the recording list, press Recordings , a
program set to be recorded is marked with a (red
dot) before the program's name.
To record a program…
1 - Press TV GUIDE and select a future or
ongoing program.
2 - Press the color key Record .
3 - Press BACK to close the menu.
To cancel a recording…
1 - Press TV GUIDE and select the program set
for recording.
2 - Press the color key Clear Recording .
3 - Press BACK to close the menu.
27
9
Recording and
Pause TV
9.1
Recording
What you need
You can record a digital TV broadcast and watch it
later.
To record a TV program you need…
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on-screen TV
Guide
• a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
Some digital TV operators do not allow the recording
of channels.
For more information on installing a USB Hard Drive,
in Help, press the color key Keywords and look
up USB hard drive, installation.
Record a program
Record now
To record the program you are watching,
press (Record) on the remote control.
If you receive TV guide information from the Internet,
you can adjust the end time of the recording in the
pop-up window before you confirm the recording.
If you receive TV guide information from the
broadcaster, the recording starts immediately. You
can adjust the end time of the recording in the list of
recordings.
To stop recording, press (Stop).
Schedule a recording
You can schedule a recording of an upcoming
program for today or a few days from today
(maximum of 8 days away).
1 - To schedule a recording, press TV Guide .
On the TV guide page, select the channel and
program you wish to record.
You can enter the channel number to jump to the
channel in the list.
Press (Right) or (Left) to scroll through the
programs of a channel.
To change the date of the list, press OPTIONS
and select Select day. In the list, select the day you
want and press OK. If the TV guide comes from the
Internet, you can select the date at the top of the
page and press OK.
2 - With the program highlighted, press Record or
press OPTIONS and select Record. The TV adds
some time buffer at the end of the program. You can
add some extra buffer if needed.
3 - Select Schedule and press OK. The program is
scheduled for recording. A warning will appear
automatically when overlapping recordings are
scheduled.
If you plan to record a program in your absence,
remember to leave the TV switched to standby and
the USB Hard Drive turned on.
List of recordings
To view the list of recordings and scheduled
recordings, press Home , select Utilities
> Recordings and press OK.
In this list, you can select a recording to watch,
remove recorded programs, adjust the end time of an
ongoing recording or check the free disk space. Also
in this list, if the TV guide comes from the Internet,
you can schedule a recording for which you set the
beginning and end time yourself, as a timed recording
not linked to a program. To set a timed recording,
select Schedule recording at the top of the page and
press OK. Set the channel, date, and time span. To
confirm the recording, select Schedule and press OK.
Remove a scheduled recording
Select the scheduled recording,
press Remove and press OK.
Specifics
• While recording a program, you can watch a
previously recorded program.
• While recording, you cannot switch TV channels.
• While recording, you cannot pause the TV
broadcast.
• To Record, broadcasters need a reliable clock
setting. If you reset the TV clock manually, recordings
may fail.
28
Watch a recording
To watch a recording . . .
1 - Press Home ,
select Utilities > Recordings and press OK.
2 - In the list, select the recording and
press (Play) to start the playback. You can use
the (Forward), (Rewind), (Pause)
or (Stop) keys on the remote control.
Expired recording
Broadcasters can limit the number of days a recording
can be viewed. A recording in the list can show the
number of days before it expires.
Failed recording
When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
recording is marked as Failed.
Delete a recording
To delete an existing recording, select the recording in
the list, press Remove and press OK.
For more information, press Keywords and look
up Record a program.
Pause TV
You can pause a TV broadcast and resume watching
it later. Only digital TV channels can be paused. You
must connect a USB Hard Drive to buffer the
broadcast. You can pause a broadcast for a maximum
time span of 90 minutes.
For more information, press Keywords and look
up USB hard drive.
Pause or resume a broadcast
To pause a broadcast, press (Pause). A progress
bar appears briefly on screen.
To call up the progress bar, press (Pause) again.
To resume watching, press (Play). The icon on
screen indicates you are watching a paused
broadcast.
Back to the actual TV broadcast
To switch back to the actual TV broadcast,
press (Stop).
The moment you switch to a digital channel, the USB
Hard Drive starts buffering the broadcast. When you
switch to another digital channel, the broadcast of the
new channel is buffered and the broadcast of the
previous channel is cleared. When you switch to a
connected device (a Blu-ray Disc player or digital
receiver) the USB Hard Drive stops buffering and the
broadcast is cleared. Also when you switch the TV to
standby the broadcast is cleared.
While recording a program on the USB Hard Drive,
you cannot pause a broadcast.
Instant replay
While watching a broadcast from a digital TV channel,
you can easily instant replay the broadcast.
To replay the last 10 seconds of a broadcast,
press (Pause) and press (Left).
You can press repeatedly until you reach the start
of the broadcast buffer or the maximum time span.
Progress bar
With the progress bar on screen, press (Rewind)
or press (Forward) to select from where you want
to start viewing the paused broadcast. Press these
keys repeatedly to change speed.
29
10
Home menu
10.1
About the Home menu
Channels
This row contains all channels.
Sources
This row contains available sources on this TV.
Utilities
This row contains TV functions available to the user.
Quick settings
This row contains settings available to the user.
10.2
Open the Home menu
To open the Home menu and open an item…
1 - Press Home .
2 - Select an item and press OK to open or start it.
3 - Press BACK to close the Home menu
without starting anything.
30
11
Utilities
11.1
About Utilities
Smart TV
Open Smart TV page.
TV guide
For more information, in Help, press the color
key Keywords and look up TV guide.
Recordings
For more information, in Help, press the color
key Keywords and look up Recording.
Channels
View channel list.
Update software
For more information, in Help, press the color
key Keywords and look up Update software.
Demo Me
View Demo Me for demo on this TV.
Help
Use Help function to diagnose and get more
information about your TV.
31
12
Netflix
12.1
About Netflix
If you have a Netflix subscription, you can enjoy
Netflix on this TV. Your TV must be connected to the
Internet.
To open Netflix, press to open the Netflix
App. You can open Netflix immediately from a TV in
standby.
www.netflix.com
32
13
Sources
13.1
Switch to a device
From the list of Sources, you can switch to any of the
connected devices. You can switch to a tuner to
watch TV, open the content of a connected USB Flash
Drive or see the recordings you made on a connected
USB Hard Drive. You can switch to your connected
devices to watch their programs, or to a digital
receiver, or Blu-ray Disc player.
To switch to a connected device…
1 - Press SOURCES to open the Sources menu.
2 - Select one of the items in the source list and
press OK. The TV will show the program or content of
the device.
3 - Press SOURCES again to close the menu.
One Touch Play
With the TV on standby, you can switch on a disc
player with your TV remote control.
To switch on both the disc player and TV from
standby and start playing the disc immediately,
press (Play) on the TV remote control. The device
must be connected with an HDMI cable and both the
TV and the device must have HDMI CEC switched on.
13.2
Options for TV Input
Some TV input devices offer specific settings.
To set the options for a specific TV input…
1 - Press SOURCES.
2 - Select the TV input from the list and press OK.
3 - Press OPTIONS. You can set the options for
the selected TV input here.
4 - Press OPTIONS again to close the Options
menu.
Possible options…
Controls
With this option you can operate the connected
device with the TV remote control. The device must
be connected with an HDMI cable and both the TV
and the device must have HDMI CEC switched on.
13.3
Scan connections
To rescan connections and update the Sources menu,
press Scan connections. (if key is available
on the bottom of the screen.)
13.4
Game or computer
The device type determines picture and sound styles,
resolution values and other specifics. You don't have
to worry about the ideal settings.
For some devices the device type is unclear. A game
console can have a built-in Blu-ray Disc player, so
the type is set to Player because it is used as a disc
player most of the time. For this kind of device, you
can temporarily switch to the ideal settings for
gaming. Or alternatively, switch to the ideal settings
for a connected computer.
You can only use the setting Game or
Computer when you switch to a connected device in
the Sources menu. The Game or Computer setting is
stored for the selected device.
To switch to the ideal settings for gaming or computer
manually…
1 - Press , select Picture > Advanced and
press OK.
2 - Select Game or Computer and press OK.
3 - Select Game, Computer or Off.
4 - Press (left) to go back one step or
press BACK to close the menu.
Remember to set this setting back to Off when you
stop playing the game.
33
14
Internet
14.1
Start Internet
You can browse the Internet on your TV. You can
view any Internet website but most of them are not
prepared for a TV screen.
• Some plug-ins (e.g., to view pages or videos) are not
available on your TV.
• You cannot send or download files.
• Internet pages are shown one page at a time and
full screen.
To start the Internet browser…
1 - Press Home > Utilities, and press OK.
2 - Select Internet and press OK.
3 - Enter an Internet address and press OK.
4 - To close Internet, press Home or EXIT.
14.2
Internet Options
Some extras are available for the Internet.
To open the extras…
1 - With the website open, press OPTIONS.
2 - Select one of the items and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
• Add to Speed Dial
• Add to Bookmarks
• Page Security
• New Private Tab
• Settings
• Help
• Exit Internet Browser
34
15
Movies, photos and
music
15.1
From a USB connection
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard
Drive.
With the TV turned on, plug in a USB flash drive or a
USB Hard Drive to one of the USB connections. The
TV detects the device and will list your media files.
If the list of files does not appear automatically…
1 - Press SOURCES, select USB and press OK.
2 - Select USB Devices and press (right) to
select the desired USB device.
3 - You can browse your files in the folder structure
you have organized on the drive.
4 - To stop playing videos, photos and music,
press EXIT.
Warning
If you try to pause or record a program with a USB
Hard Drive connected, the TV will ask you to format
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive.
15.2
From a computer
If the TV and the computer are in the same network,
the TV can browse and play files stored on your
computer.
On your computer, you need to install media server
software like Twonky™ to share your files with the TV.
The TV shows your files and folders as they are
organized on your computer.
To browse the files on your computer,
press SOURCES , select Network and press OK.
15.3
Menu bar and sorting
With a USB device connected, the TV sorts the files by
type. Navigate to the menu bar and select the type of
file you are looking for.
If you browse files from a computer, you can only
browse the files and folders as they are organized on
the computer.
The menu bar
Navigate to the menu bar and select the type of file
you want to watch or play.
Select Photos , Music or Movie .
Alternatively, you can open the Folders view
and browse your folders to look for a file.
Sorting
To browse your photos by date, month, year, or
alphabetically by name, press Sort .
To browse your music by album, artist, genre, or
alphabetically by name, press Sort .
Videos are sorted alphabetically.
15.4
Play your movie
Play movie
• To play a video, select Movie in the menu bar,
select a video and press OK.
• If there are more videos in the same folder,
press Play all to play all videos in this folder.
• To jump to the next or previous
video, press + or - .
• To pause the video, press OK. Press OK again to
continue.
• To make a 10-second jump forwards or backwards
in a video, press or .
• To rewind or fast forward, press or . Press the
keys several times to speed up to 2x, 4x, 8x, 16x, 32x.
• To stop the video playback, press (Stop).
Info
To view info on a video (playhead position, duration,
title, date, etc.), select the video and press INFO .
Press again to hide the info.
Movie options
During the video playback, press OPTIONS to…
• Subtitles
• Subtitle language
• Audio language
• Character set
• Status
• Repeat
• Subtitle settings
35
15.5
View your photos
View photos
To view photos, select Photos in the menu bar,
select a photo thumbnail and press OK.
If there are several photos in the same folder, select a
photo and press Slide show to start a slide show
of all photos in this folder.
To jump to the next or previous photo,
press + or - .
To stop the slide show or close the photo,
press (Stop).
Info
To view photo info (size, creation date, file path, etc.),
select a photo and press INFO .
Press again to hide the info.
Slideshow with music
You can watch a slideshow of your photos and listen
to your music at the same time. You must start the
music before you start the photo slideshow.
To play music with the slide show…
1 - Select a song or a folder with songs and
press OK.
2 - Press INFO to hide the browser list.
3 - Press BACK .
4 - Now use the navigation arrows to select the
folder with photos.
5 - Select the folder with photos and press Play
All.
6 - To stop the slideshow, press BACK .
Photo options
With a photo on screen, press OPTIONS to…
• Shuffle – Play your files in a random order.
• Repeat – Play the slide show once or continuously.
• Slide show speed – Set the speed of the slide
show.
• Slide show transition – Set the style of the photo
transitions.
15.6
Play your music
Play music
• To play music, select Music in the menu bar,
select a song and press OK.
• If there are more songs in the same folder,
press Play all to play all songs in this folder.
• To jump to the next or previous song, press +
or - .
• To pause the music, press OK. Press OK again to
continue.
• To make a 10-second jump forward or back in a
song, press or .
• To rewind or fast forward, press or . Press the
keys several times to speed up - 2x, 4x, 8x, 16x, 32x.
• To stop the music playback, press (Stop).
Info
To view song info (title, artist, duration, etc.), select
the song and press INFO .
Press again to hide the info.
Music options
Options for playing music...
• Repeat – Play all songs in this folder once or
continuously.
36
16
Smartphones and
tablets
16.1
Miracast
About Wi-Fi Miracast
You can view your photos or play your music and
videos from a mobile device on your TV with Wi-Fi
Miracast™. The mobile device and the TV should be
within range, which usually means being in the same
room.
Check if your mobile device is ready for Miracast.
Your TV is a Wi-Fi CERTIFIED Miracast™ device.
With Miracast™, you can watch and share the screen
of your smartphone, tablet or computer on your TV
screen wirelessly. You can stream videos (audio and
video), and share photos or anything else that's on
the device screen. No need to connect the device to
your home network. Both the TV and the device must
be Wi-Fi CERTIFIED Miracast™ devices and have
Miracast switched on.
Miracast on this TV is subject to the HDCP protocol
and cannot display copy-protected premium content
sent by a device. The maximum video resolution
supported is 720p for 2.4GHz Wi-Fi or 1080p for 5GHz
Wi-Fi.
For more information on Wi-Fi CERTIFIED Miracast™
go to www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi
CERTIFIED Miracast™, Miracast™ are trademarks of
the Wi-Fi Alliance.
Switch on Miracast
Make sure Wi-Fi Miracast is switched on.
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Wi-Fi Miracast and press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Share a screen on TV
To share the screen of your smartphone, tablet or
computer on the TV…
1 - Switch on the TV.
2 - On the device, in the settings menu, set the
device to cast or mirror its display. Miracast uses Wi-Fi
Direct™.
3 - On the device, scan for the available Miracast
devices and select the TV to connect.
4 - On the TV, agree to the request to connect. You
might be asked to enter a PIN code from the device
on the TV. Enter the numbers with the digit keys on
the remote control. Alternatively, you might be asked
to enter a PIN code on the device. If the connection is
made, the TV will show the device's screen.
5 - On the device, select the videos, photos or files
you want to watch on TV.
* Miracast is supported by WiDi 3.5 onwards.
You might find the Wi-Fi connection (e.g.
"DIRECT_tvname") also in lists of available networks
on other network devices, e.g. your laptop computer.
However, this connection can only be used by Wi-Fi
Miracast devices.
Stop sharing
You can stop sharing a screen from the TV or the
mobile device.
From the device
With the application you use to start Miracast, you
can disconnect and stop watching the screen of the
device on TV. The TV will switch back to the last
selected program.
From the TV
To stop watching the screen of the device on TV, you
can . . .
• press EXIT to watch a TV broadcast
• press Home to start another activity on the TV
• press SOURCES to open the Sources menu and
select a connected device.
Block a device
The first time you receive a request to connect from a
device, you can block the device. The request from
this device and all its requests in the future, will be
ignored.
To block a device…
Select Block… and press OK.
Unblock all devices
37
All previously connected and also blocked devices
are stored in the Wi-Fi Miracast list of connections. If
you clear this list, all blocked devices will be
unblocked.
To unblock all blocked devices…
1 - Press , select Network and press OK.
2 - Select Reset Wi-Fi Miracast connections and
press OK. The list is cleared.
3 - Press (left) repeatedly if necessary, to close
the menu.
Blocking a previously connected device
If you want to block a device that you previously
connected, you need to clear the Wi-Fi Miracast
connections list first. If you clear this list, you will have
to confirm or block the connection for every device
again.
Screen delay
The normal delay when sharing a screen with
Miracast is about 1 second. The delay might be longer
if you are using older devices with less processing
power.
16.2
MHL
This TV is MHL™ compliant.
If your mobile device is also MHL compliant, you can
connect your mobile device with a MHL cable to the
TV. With the MHL cable connected you can share
what's on your mobile device on the TV screen. Your
mobile device charges its battery at the same time.
The MHL connection is ideal for watching movies or
playing games from your mobile device on TV for a
longer time.
Charging
With the MHL cable connected, your device will
charge while the TV is switched on (not in standby).
MHL Cable
You need a passive MHL cable (HDMI to Micro USB)
to connect your mobile device to the TV. You might
need an extra adapter to connect to your mobile
device. To connect the MHL cable to the TV use
the HDMI 1 MHL connection.
MHL, Mobile High-Definition Link and the MHL Logo
are trademarks or registered trademarks of the MHL,
LLC.
In Help, press Keywords and look up HDMI
MHL for more information.
16.3
Smart TV
About Smart TV
Connect this TV to the Internet and discover a new
world of television. You can install a wired connection
to your router or you can link up wirelessly with Wi-Fi.
With the TV connected to your home network, a
smartphone can show a photo on TV, you can play
videos stored on your computer or control the TV with
your tablet.
With your TV connected to the Internet, you can
watch a rental video from an online video store, read
the online TV guide or record your favorite TV show
on a USB Hard Drive. The Smart TV Apps add to the
fun with all sorts of entertainment and convenient
services.
What you need
To enjoy Smart TV Apps, you must connect the TV
to a router with a high-speed (broadband) internet
connection. You can use a home network connected
to the Internet. You do not need a computer.
For more information, press Keywords and look
up Network.
Tip
To enter text or to navigate an Internet page more
easily, you can consider connecting a USB keyboard
and a USB mouse to the TV.
For more information, press Keywords and look
up USB keyboard or USB mouse.
Setup Smart TV
The first time you open Smart TV, you need to
configure your connection. Read and agree to the
terms and conditions to continue. If you do not want
to set up Smart TV, press BACK.
Parental control
To lock Adult 18+ rated apps . . .
1 - Turn on Smart TV parental control by
selecting Enable and then press OK.
2 - Enter an unlock PIN code of your choice.
3 - Confirm your PIN code.
Adult 18+ rated apps are now locked. To open a
locked app, select the app and press OK. The TV will
38
ask you to enter your 4-digit code.
Smart TV Apps
Open Smart TV
The Smart TV start page is your link to the Internet.
You can rent movies online, read newspapers, watch
videos, listen to music, shop online, open your social
network page, or watch TV programs whenever you
want with Online TV.
To do this, you use Apps, which are Internet sites
tailored for TV. With your TV connected to the
Internet, you can open Smart TV.
Open Smart TV
To open the Smart TV start page, press Smart TV .
Alternatively, you can press Home > Utilities,
select Smart TV and press OK.
The TV connects to the Internet and opens the Smart
TV start page. This may take a few seconds.
Close Smart TV
To close the Smart TV start page,
press Home and select another activity.
TP Vision Europe B.V. bears no responsibility
regarding the content and the quality of the content
provided by the content service providers.
Smart TV start page
1 - Now on your TV
2 - Your Apps
3 - App gallery
4 - Internet
5 - Recommended Apps
6 - Search
7 - Color keys for control
Your Apps
You start Apps from the Smart TV start page. If the
start page does not hold any Apps yet, you can add
Apps from the App gallery.
App gallery
In the App gallery you find all available Apps.
Internet
The Internet App opens the World Wide Web on your
TV.
On your TV, you can view any Internet website but
most of them are not tailored for a TV screen.
- Some plug-ins (e.g. to view pages or videos) are not
available on your TV.
- Internet pages are shown one page at a time and
full screen.
Recommended Apps
In this window, Philips presents a range of
recommended Apps for your country, Apps for Online
TV or a selection of rental movies from Video stores.
You can select and open them from the
Recommended Apps window.
Search
With Search, you can search the App gallery for
relevant Apps.
Enter a keyword in the text field, select and
press OK to start searching. You can enter names,
titles, genres, and description keywords to search.
Alternatively, you can leave the text field empty and
search for the most popular searches/keywords for a
range of categories. In the list of found keywords,
select a keyword and press OK to search for items
with that keyword.
Open an App
To open an App, you must add it to your list of Apps
in the Smart TV start page first. You can add Apps to
your list from the App gallery.
The list of your Apps on the Smart TV start page can
be several pages long. Use the arrow keys to go to the
next or previous page.
Open an App
To open an App . . .
1 - Press Home > Utilities > Smart TV .
2 - On the start page, select an App icon and
press OK.
In an App, press BACK to go back one step or
page.
Close an App
To close an App and return to the Smart TV start
page, press Smart TV .
Reload an App page
If an App page did not load properly,
press OPTIONS and select Reload to reload
the page.
Zoom
To zoom in on an App page . . .
1 - Press OPTIONS and select Zoom page.
2 - Use the slider bar to set the zoom level.
3 - Return to normal view by resetting the slider bar.
View security info
You can check the security level of an App page.
On an App page, press OPTIONS and
select Security info. If a lock is shown next to the
loading animation on the bottom of the screen while
loading a page, the transfer is secured.
39
Feedback on an App
Select the App and press Feedback to select a
'like' or 'dislike' button and send a suggestion or
comment to us. You can also report an App
malfunction.
Manage your Apps
From the list of Apps on the Smart TV start page you
can . . .
• Remove an App
To remove an App from the list, select the App icon
and press Remove . The App is still available in
the App gallery.
• Move an App
To reposition an App in the list, select the App icon,
press Move and use the arrow keys to reposition
the App. Press OK to confirm the position.
• Manage an App
To manage an App from the list, select the App icon
and press Manage .
App gallery
Open the App gallery in Smart TV to browse the
Apps, the collection of tailored websites for TV.
Find the App for YouTube videos, a national
newspaper, an online photo album, etc. There are
Apps to rent a video from an online video store and
Apps for watching programs you missed. If the App
gallery does not have what you are looking for, try the
World Wide Web and surf the Internet on your TV.
Rental video Apps
With the video store Apps in Smart TV, you can rent
your favorite movie from an online rental video store.
You can pay securely with your credit card.
Rent a movie
1 - Open a Video store App in your list of Apps, or
select a recommended video on the Smart TV start
page.
2 - Select a movie.
3 - Make the online payment.
4 - Start watching. You can use the (Play)
and (Pause) keys.
Most Video stores ask you to create a login account.
Streaming video
With this TV, you can watch rental movies sent as a
streaming video format. You can almost instantly
watch the movie. You might need a USB Hard Drive to
store some video buffer. If you have a USB Hard
Drive connected, you can also download rental
movies from video stores that offer movie
downloading only. You can pause or restart a
downloaded rental movie. Consult the video store
regarding the rental duration of rental movies.
Internet traffic
Streaming or downloading many videos may exceed
your monthly Internet traffic limit.
Online TV
With the Online TV App on the Smart TV start page*,
you can watch TV programs you missed or watch
programs whenever it suits you best.
Open Online TV
To open the Online TV App . . .
1 - Press Smart TV .
2 - On the start page, select the Online TV icon
and press OK.
3 - Select a program on the page and press OK to
start watching. You can use the (Play)
and (Pause) keys.
List per broadcaster
To view Online TV programs ordered by broadcaster,
press All broadcasters .
Select a broadcaster and press OK.
* If available in your region.
Multi View
While you are on a Smart TV App or the Internet, you
can watch the current TV channel. Multi View opens
a small screen for the TV channel next to the Smart
TV screen.
To open Multi view…
1 - Press SMART TV to open Smart TV.
2 - Press MULTI VIEW to open the small screen.
3 - Press + or – to change the TV channel
in the small screen.
Reset Smart TV
To reset your connection with Smart TV, clear the
Internet memory on the TV.
You will clear your Philips Smart TV registration and
parental rating setting, your video store app logins, all
Smart TV app favorites, Internet bookmarks and
history.
To clear the Internet memory…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Clear Internet memory and press OK.
3 - Select OK to confirm.
40
4 - Press (left) repeatedly if necessary, to close
the menu.
41
17
Multi room
17.1
About Multi room
This TV supports the Multi room client function. To
use the multi room function, you will need to have
another TV that supports the Multi room server
function.
You can watch a TV program that is streamed from
another server TV in your home. The program is
streamed from the server TV to the client TV. You can
also receive a recorded program from the server TV.
Note: Receiving a TV program with Multi Room will
reduce the picture resolution to a maximum of 720p.
You cannot receive radio channels. Some
broadcasters may protect their programs to prevent
this kind of streaming from the server TV.
17.2
What you need
To receive a TV program from server TV, the program
must come from a digital TV channel.
Both TVs must be connected to your home wireless
network. For more information,
press Keywords and look up Wireless Network.
Make sure that both TVs have the setting Switch on
with Wi-Fi (WoWLAN) enabled in the TV setup.
To check this setting on this TV…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Switch on with Wi-Fi (WoWLAN) and
press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
17.3
Using Multi room
First time use
When you start Multi room for the first time, turn on
both TVs.
Once this TV has connected to the other TV, the other
TV will appear automatically in the Browse
network menu, even when it is in standby.
Receive a TV channel
With Multi room, you can watch the current TV
channel or open the channel list of the server TV. If
you select a channel from the list, the other TV will
also switch to the channel you selected. If there is a
connected Hard Disc Drive (HDD) with recordings*,
you can also watch these on this TV. You cannot
switch channels while the server TV is recording or in
Pause TV mode.
To watch a TV channel from the server TV...
1 - Make sure the server TV is switched on.
2 - On this TV, press SOURCES,
select Network and press OK.
3 - If the TV is not yet connected to your home
network, the network installation will start
automatically. If the TV is already connected, go to
step 4.
4 - In the Network menu, select the name of the
server TV and press OK.
5 - Select what you want to watch from the TV...
• to watch the current channel of the server TV,
select Current channel and press OK.
• to open the channel list of the server TV,
select Watch TV and press (Right).
• to open the list of recordings* on the server TV,
select Watch recordings and press (Right).
• you can switch channels with + and -. You
cannot switch channels when the server TV
is recording or in Pause TV mode.
TV network name
If you have more than one TV in your home network,
you can give the TV a unique name.
To change the TV name…
1 - Press , select Network and press (right) to
enter the menu.
2 - Select TV network name and press OK.
3 - Enter the name with the on-screen keyboard.
4 - Select Done to confirm the change.
5 - Press (left) repeatedly if necessary, to close
the menu.
42
18
Settings
18.1
Quick settings
Eco settings
For more information, in Help, press the color
key Keywords and look up Eco settings.
Picture style
For more information, in Help, press the color
key Keywords and look up Picture style.
Picture format
For more information, in Help, press the color
key Keywords and look up Picture format.
Sound style
For more information, in Help, press the color
key Keywords and look up Sound style.
Headphones volume
For more information, in Help, press the color
key Keywords and look up Headphones
volume.
Speakers
For more information, in Help, press the color
key Keywords and look up TV speakers.
Clock
For more information, in Help, press the color
key Keywords and look up Clock.
Sleep timer
For more information, in Help, press the color
key Keywords and look up Sleep timer.
18.2
Picture
Picture style
Select a style
For easy picture adjustment, you can select a preset
Picture style.
1 - While watching a TV channel, press .
2 - Select Picture > Picture style, and select one of
the styles in the list.
3 - Press (left) repeatedly if necessary, to close
the menu.
The available styles are…
• Personal - The picture preferences you set during
the first start up.
• Vivid - Ideal for daylight viewing
• Football - Ideal for football game viewing
• Standard - Most energy conscious setting - Factory
setting
• Movie - Ideal for watching movies
• Photo - Ideal for viewing photos
Customize a style
Any picture setting you adjust, such as Color or
Contrast, is stored in the currently selected Picture
style. This allows you to customize each style.
Only the Personal style can save settings for each
connected device in the Sources menu.
Restore a style
The selected style will store the changes you made.
We recommend that you adjust the picture settings
for the style Personal only. The Picture Style -
Personal can save its settings for each individual
connected device in Sources menu.
To restore the style to its original setting…
1 - While watching a TV channel, press .
2 - Select Picture > Picture style, and select the
style you want to restore.
3 - Press the color key Restore style , and press
OK. The style is restored.
4 - Press (left) repeatedly if necessary, to close
the menu.
43
Home or Store
If the Picture style is switched back to Vivid every
time you switch on the TV, the TV location is set
to Shop, a setting meant for in-store promotion.
To set the TV for Home use…
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select Location > Home and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Picture settings
Color
With Color, you can adjust the color saturation of the
picture.
To adjust the color…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Color and press (right).
3 - Press the (up) or (down) arrows to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Contrast
With Contrast, you can adjust the contrast of the
picture.
To adjust the contrast…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Contrast and press (right).
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Sharpness
With Sharpness, you can adjust the level of
sharpness in fine detail of the picture.
To adjust the sharpness…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Sharpness and press (right).
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Advanced picture settings
Game or computer
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
If you have a game console with a built-in Blu-ray
Disc player, the type name may have been set to Blu-
ray Disc. With Game or computer you can switch to
the ideal settings for gaming manually. Don't forget to
switch the Game or Computer setting off when you
go back to watching TV.
To switch to the ideal settings for gaming or computer
manually…
1 - Press , select Picture > Advanced and
press OK.
2 - Select Game or computer and press OK.
3 - Select Game, Computer or Off.
4 - Press (left) to go back one step or
press BACK to close the menu.
Color settings
Tint
With Tint, you can adjust the level of tint in fine detail
of the picture. (NTSC M only)
To adjust the tint…
1 - Press , select All Settings and press OK.
2 - Select Picture and press (right) to enter the
menu.
3 - Select Advanced > Color and press OK.
4 - Select Tint, and press (right).
5 - Press the arrows (up) or (down) to adjust
the value.
6 - Press (left) repeatedly if necessary, to close
the menu.
Color enhancement
With Color enhancement, you can enhance the color
intensity and the details in bright colors.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Color > Color
enhancement and press OK.
3 - Select Maximum, Medium, Minimum or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
44
Color temperature
With Color temperature, you can set the picture to a
preset color temperature or select Custom to set a
temperature setting yourself with Custom color
temperature. Color Temperature and Custom Color
Temperature are settings intended for expert users.
To select a preset…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Color > Color
temperature and press OK.
3 - Select Normal, Warm or Cool. Or
select Custom if you want to customize a color
temperature yourself.
4 - Press (left) repeatedly if necessary, to close
the menu.
Custom color temperature
With Custom color temperature, you can set the
color temperature yourself. To set a custom color
temperature, first select Custom in the Color
Temperature menu. Custom Color Temperature is a
setting intended for expert users.
To set a custom color temperature…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Color > Custom color
temperature and press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Contrast settings
Contrast modes
With Contrast Mode, you can set the level at which
power consumption can be reduced by dimming the
intensity of the screen. Choose for the best power
consumption or for the picture with the best intensity.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Contrast > Contrast
mode and press OK.
3 - Select Standard, Best power, Best picture,
or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Dynamic contrast
With Dynamic Contrast, you can set the level at
which the TV automatically enhances the details in
the dark, middle and light areas of the picture.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Contrast > Dynamic
contrast and press OK.
3 - Select Maximum, Medium, Minimum or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Brightness
With Brightness, you can set the level of brightness
of the picture signal. Brightness is a setting intended
for expert users. We recommend non-expert users to
adjust the brightness of the picture with
the Contrast setting.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2
- Select Advanced > Contrast > Brightness, and
press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Video contrast
With Video Contrast, you can decrease the range of
the video contrast.
To adjust the level…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Contrast > Video
contrast, and press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Gamma
With Gamma, you can set a non-linear setting for
picture luminance and contrast. Gamma is a setting
intended for expert users.
To adjust the level…
1 - Press , select Picture and press (right) to
45
enter the menu.
2 - Select Advanced > Contrast > Gamma, and
press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Sharpness settings
Super resolution
With Super Resolution, you can switch on a superior
sharpness in line edges and contours.
To switch on or off…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Sharpness > Super
Resolution, and press OK.
3 - Select On or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Noise reduction
With Noise reduction, you can filter out and reduce
the level of image noise.
To adjust the noise reduction…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Sharpness > Noise
reduction, and press (right) to enter the menu.
3 - Select Maximum, Medium, Minimum or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
MPEG artifact reduction
With MPEG artifact reduction, you can smooth the
digital transitions in the picture. MPEG artifacts are
mostly visible as small blocks or jagged edges in
images.
To reduce the MPEG artifacts…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Advanced > Sharpness > MPEG
artifact reduction, and press (right) to enter the
menu.
3 - Select On and press OK .
4 - Press (left) repeatedly if necessary, to close
the menu.
Picture format
Fill the screen settings
If the picture is not filling the whole screen, if black
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen
completely.
To select one of the basic settings to fill the screen…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Picture format and press (right).
3 - Select Fill screen, Fit to screen or Wide
screen, and press OK.
4 - Press BACK to close the menu.
• Fill screen – automatically enlarges the picture to
fill the screen. Picture distortion is minimal, subtitles
remain visible. Not suitable for PC input. Some
extreme picture formats may still show black bars.
• Fit to screen – automatically zooms in the picture
to fill the screen without distortion. Black bars may be
visible. Not suitable for PC input.
Advanced
If the two basic settings are inadequate to format the
picture you want, you can use the advanced settings.
With the advanced settings you manually format the
picture on your screen.
You can zoom, stretch and shift the picture until it
shows what you need – e.g. missing subtitles or
scrolling text banners. If you format the picture for a
specific Source – like a connected game console –
you can return to this setting the next time you use
the game console. The TV stores your last settings for
each connection.
To format the picture manually…
1 - Press , select Picture and press (right) to
enter the menu.
2 - Select Picture format and press (right).
3 - Press Advanced and press OK.
4 - Use Shift, Zoom, Stretch or Original to adjust
the picture. Select Undo to return to the setting the
picture had when you opened Picture Format.
• Last setting – Select to return to the last setting.
• Shift – Select on the arrows to shift the picture. You
can only shift the picture when it is zoomed in.
• Zoom – Select on the arrows to zoom in.
• Stretch – Select on the arrows to stretch the
picture vertically or horizontally.
• Original – Shows the original format of the
incoming picture. This is a 1:1 pixel on pixel format.
Expert mode for HD and PC input.
• Undo – Select to return to the picture format you
started with.
46
18.3
Sound
Sound style
Select a style
For easy sound adjustment, you can select a preset
setting with Sound Style.
1 - While watching a TV channel, press .
2 - Select Sound and press (right) to enter the
menu.
3 - Select Sound style, and select one of the styles
in the list.
4 - Press (left) repeatedly if necessary, to close
the menu.
The available styles are…
• Personal - The sound preferences you set during
the first start up.
• Original - Most neutral sound setting
• Movie - Ideal for watching movies
• Music - Ideal for listening to music
• Game - Ideal for gaming
• News - Ideal for speech
Restore a style
With a Sound Style selected, you can adjust any
sound setting in Setup > Sound…
The selected style will store the changes you made.
We recommend that you adjust the sound settings for
the style Personal only. The Sound Style - Personal
can save settings for each individual connected
device in the Sources menu.
To restore the style to its original setting…
1 - While watching a TV channel, press .
2 - Select Sound and press (right) to enter the
menu.
3 - Select Sound style , and select the Sound Style
you want to restore.
4 - Press the color key Restore style . The style is
restored
5 - Press (left) repeatedly if necessary, to close
the menu.
Sound settings
Bass
With Bass, you can adjust the level of low tones in
the sound.
To adjust the level…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Bass and press (right).
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Treble and press (right).
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Surround mode
With Surround Mode, you can set the sound effect of
the TV speakers.
To set the surround mode…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Surround mode and press (right) to
enter the menu.
3 - Select Stereo or Incredible surround.
4 - Press (left) repeatedly if necessary, to close
the menu.
Advanced sound settings
Auto volume leveling
With Auto Volume Leveling, you can set the TV to
automatically level out sudden volume differences,
typically at the beginning of adverts or when you are
switching channels.
To switch on or off…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced and press (right) to enter
the menu.
3 - Select Auto volume leveling and
press (right) to enter the menu.
4 - Select On or Off.
5 - Press (left) repeatedly if necessary, to close
the menu.
47
Delta volume
With Delta volume, you can set the TV to
automatically level out sudden volume differences.
To adjust the value…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced and press (right) to enter
the menu.
3 - Select Delta volume and press (right) to
enter the menu.
4 - Press the arrows (up) or (down) to adjust
the value.
5 - Press (left) repeatedly if necessary, to close
the menu.
TV speakers
You can send the TV sound to a connected audio
device - a Home Theater System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
• If you select TV speakers > Off, you permanently
switch off the TV speakers.
• If you select TV speakers > On, the TV speakers
are always on.
Clear sound
With Clear Sound, you improve the sound for speech.
Ideal for news programs. You can switch the speech
improvement on or off.
To switch on or off…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Clear sound and press OK.
3 - Select On or Off, then press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio out format
If you have a Home Theater System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio Out
Format to Multichannel. With Multichannel, the TV
can send the compressed multichannel sound signal
from a TV channel or connected player to the Home
Theater System. If you have a Home Theater System
without multichannel sound processing, select Stereo.
To set Audio out format…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out format and
press OK.
3 - Select Multichannel, Stereo or Multichannel
(by pass), then press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio out leveling
Use the Audio Out Leveling setting to level the
volume (loudness) of the TV and the Home Theater
System when you switch over from one to another.
Volume differences can be caused by differences in
sound processing.
To level the difference in volume…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out leveling and
press OK.
3 - Select More, Medium, or Less, then press OK.
4 - If the volume difference is large, select More. If
the volume difference is small, select Less.
5 - Press (left) repeatedly if necessary, to close
the menu.
Audio Out Leveling affects both the Audio Out -
Optical and HDMI ARC sound signals.
HDMI 3 - ARC
To switch on or off…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > HDMI 3 - ARC and
press OK.
3 - Select On or Off, then press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio out delay
If you set an Audio sync delay on your Home Theater
System, to synchronize the sound with the picture,
you must switch off Audio Out Delay on the TV.
To switch off Audio Out Delay…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out delay and
press OK.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
48
Audio out offset
If you cannot set a delay on the Home Theater
System, you can set a delay on the TV with Audio Out
Offset.
To synchronize the sound on the TV…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Advanced > Audio out offset and
press OK.
3 - Use the slider bar to set the sound offset and
press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Headphone volume
With Headphones Volume, you can set the volume
of connected headphones separately.
To adjust the volume…
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select Headphones volume and press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
TV placement
As part of the first installation, this setting is set to
either On a TV stand or Hung on the wall. If you
have changed the placement of the TV since then,
adjust this setting accordingly for best sound
reproduction.
1 - Press , select Sound and press (right) to
enter the menu.
2 - Select TV placement and press OK.
3 - Select On a TV stand or On the wall.
4 - Press (left) repeatedly if necessary, to close
the menu.
18.4
Eco settings
Energy saving
Eco settings bundles the settings that help the
environment.
Energy Saving
If you select Energy Saving, the TV switches to Picture
Style - Standard automatically, the most ideal energy
conscious setting for the picture.
To set the TV in Energy Saving…
1 - Press , select Eco settings and
press (right) to enter the menu.
2 - Select Energy saving, the Picture style is set to
Standard automatically.
3 - Press (left) repeatedly if necessary, to close
the menu.
Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
To only switch off the TV screen…
1 - Press , select Eco settings and
press (right) to enter the menu.
2 - Select Screen off.
3 - Press (left) repeatedly if necessary, to close
the menu.
To switch the screen back on, press any key on the
remote control.
Switch off timer
If the TV receives a TV signal, but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal or a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer …
1 - Press , select Eco settings and
press (right) to enter the menu.
2 - Select Switch off timer and press OK.
3 - Press the arrows (up) or (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4 - Press (left) repeatedly if necessary, to close
the menu.
For more information on environmentally friendly TV
settings, in Help, press the color
key Keywords and look up Eco settings.
49
18.5
General settings
Languages
In Help, press Keywords and look
up Language settings for more information.
Clock
In Help, press Keywords and look up Clock
settings for more information.
Sleep timer
For more information, in Help, press the color
key Keywords and look up Sleep timer.
Switch off timer
For more information, in Help, press the color
key Keywords and look up Switch off timer.
EasyLink
EasyLink
To switch off EasyLink completely…
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select EasyLink, press (right) and
select EasyLink one step further.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
EasyLink remote control
To switch off EasyLink remote control…
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select EasyLink > Easylink remote control, and
press OK.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Pixel Plus Link
Some devices, a DVD or Blu-ray Disc player, might
have their own picture quality processing. To avoid
bad picture quality caused by interference with the
TV processing, the picture processing of these devices
should be disabled. The TV comes with Pixel Plus link
turned on and disables the picture quality processing
of recent Philips devices connected to the TV.
To switch off Pixel Plus link…
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select EasyLink > Pixel Plus link, and
press OK.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Auto turn off devices
You can set the TV to turn off the connecting HDMI-
CEC compliant devices if they are not the active
source. The TV turns the connected device to standby
after 5 minutes of inactivity.
USB keyboard settings
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard layout first, you
can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout
was selected…
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select USB keyboard settings, and press OK to
start the keyboard setup.
Mouse settings
To adjust the motion speed of the USB mouse.…
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select Mouse settings, and press OK to start
the mouse speed setup.
50
Home or Store
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner. Picture
style is set to Vivid automatically. Switch off
timer is switched off.
To set the TV to Store location…
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select Location > Store, and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
If you use the TV at home, set the TV in Home
location.
Shop setup
If the TV is set to Store, you can set the availability of
a specific demo for in store use.
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select Shop setup and press (right) to enter
the menu.
3 - Select banner, and select Commercial banner
or Promotional banner as in store demo.
4 - Press (left) repeatedly if necessary, to close
the menu.
TV guide
For more information, in Help, press the color
key Keywords and look up TV guide, data and
information.
Channel logos
In some countries, the TV can show the channel
logos.
If you do not want these logos to appear, you can
switch them off.
To switch off the logos…
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select Channel logos and press (right) to
enter the menu.
3 - Select Off and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Samba TV
Samba TV makes TV better by cleverly recognizing on-
screen content. By enabling, you accept and
acknowledge Samba TV's Terms of Services and
Privacy Policy.
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Samba TV and press (right) to enter
the menu.
3 - Press (left) repeatedly if necessary, to close
the menu.
Factory settings
You can set the TV back to the original TV settings
(factory settings).
To switch back to the original settings…
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Factory settings and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo the full TV installation. The TV is
completely reinstalled.
To redo the full TV installation…
1 - Press , select General settings and
select Reinstall TV.
2 - Follow the instructions on screen. The installation
may take a few minutes.
Channel list copy
For more information, in Help, press the color
key Keywords and look up Channel List Copy,
copy.
Universal Access
For more information, in Help, press the color
key Keywords and look up Universal access.
51
18.6
Clock and language
Clock
Date and time
In some countries, digital broadcasts do not send
UTC - Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
When you record programs scheduled in the TV
Guide, we recommend that you do not change the
time and date manually. In some countries, for some
network operators, the Clock setting is hidden to
avoid an incorrect clock setting.
To correct the TV clock automatically...
1 - Press , select General
settings > Clock > Auto clock mode.
2 - Select Automatic and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
To set the TV clock manually…
1 - Press , select General
settings > Clock > Auto clock mode, and
select Manual.
2 - Select Date and Time to adjust.
3 - Press (left) repeatedly if necessary, to close
the menu.
Time zone
To set the time zone…
1 - Press , select General
settings > Clock > Time zone, and press OK.
2 - Select one of the time zones.
3 - Press (left) repeatedly if necessary, to close
the menu.
Menu language
To change the language of the TV menus and
messages…
1 - Press , select General
settings > Language > Menu language and
press OK.
2 - Select the language you want and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
CC
To switch on closed captions, press CC.
You can switch subtitles On, Off or On during
mute.
Or to show subtitles automatically when the
broadcasted program is in a different language (the
language set for the TV) select Automatic. This
setting will also show Subtitles automatically when
you mute the sound.
18.7
Universal Access
Switch on
With Universal access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind,
or visually impaired people.
Switch on
If you did not switch on Universal access during the
installation, you can still enable it in Universal
access menu.
To switch on Universal access…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Universal access one step further.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
With Universal access switched on, the
option Universal access is added in the Options
menu.
Audio description
Switch on
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
To be able to set audio and effects for the visually
impaired, you must first enable Audio description.
Also, before you can switch on Audio description, you
have to enable Universal access in setup menu.
With Audio description, a narrator's commentary is
added to the normal audio.
To switch on the commentary (if available)…
To switch on Audio description…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select On and press OK.
52
3 - Select Audio description and press (right) to
enter the menu.
4 - Select Audio description one step further
2 - Select On and press OK.
6 - Press (left) repeatedly if necessary, to close
the menu.
You can check if an audio commentary is available.
In the Options menu, select Audio language and
look for an audio language marked with an AD.
Speakers/headphones
With Speakers/headphones, you can select where
you want to hear the audio commentary.
On the TV speakers only, on the headphones only or
on both.
To set Speakers/headphones…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio
Description > Speakers/headphones and press OK.
3 - Select Speakers, Headphones or Speakers +
Headphones and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
Mixed volume
You can mix the volume of the normal audio with the
audio commentary.
To mix the volume…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio Description > Mixed volume and
press OK.
3 - Press the arrows (up) or (down) to adjust
the value.
4 - Press (left) repeatedly if necessary, to close
the menu.
Audio effect
Some audio commentary can hold extra audio
effects, like stereo or fading sound.
To switch on Audio effects (if available)…
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio description > Audio effects > On
and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Speech
The audio commentary can also hold subtitles for the
words which are spoken.
To switch on these subtitles (if available) . . .
1 - Press , select Universal access and
press (right) to enter the menu.
2 - Select Audio description > Speech and press
OK.
3 - Select Descriptive or Subtitles and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
53
19
Networks
For more information, in Help, press the color
key Keywords and look up Network, for more
information on connecting the TV to a network.
54
20
Channel installation
20.1
Antenna/cable installation
Update channels
Manual channel update
You can always start a channel update yourself.
To start a channel update manually…
1 - Press , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Search for channels and press OK.
4 - Select Start now and press OK.
5 - Select Update channels and press OK.
6 - Press BACK to close the menu.
Reinstall channels
Reinstall all channels
You can reinstall all channels and leave all other TV
settings untouched.
If a PIN code is set, you will need to enter this code
before you can reinstall channels.
To reinstall channels…
1 - Press , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Search for channels and press OK.
4 - Select Start now and press OK.
5 - Select Reinstall channels, select Next and
press OK.
6 - Select your country and press OK.
7 - Select Antenna or Cable.
8 - Select Start and press OK to update channels.
This can take a few minutes.
9 - Press BACK to close the menu.
Reinstall TV
You can redo the full TV installation. The TV is
completely reinstalled.
To redo the full TV installation…
1 - Press , select General settings > Reinstall
TV and press OK.
2 - Enter your PIN code if necessary.
3 - Select Yes and press OK to confirm.
4 - The TV will perform a complete reinstallation. All
settings will be reset and installed channels will be
replaced. The installation can take a few minutes.
5 - Press BACK to close the menu.
20.2
Channel list copy
Introduction
Channel List Copy is intended for dealers and expert
users.
With Channel List Copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel List Copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
• Both TVs must be from the same year range.
• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA
• Both TVs have compatible software versions.
Current software version
To check the current version of the TV software…
1 - Press , select Update Software and
press (right) to enter the menu.
2 - Select Current Software Info and press OK.
3 - The version, release notes, and creation date are
shown. Also, the Netflix ESN Number is shown, if
available.
4 - Press (left) repeatedly if necessary, to close
the menu.
Copy a channel list
To copy a channel list…
1 - Switch on the TV. This TV should have channels
installed.
2 - Plug in a USB flash drive.
3 - Press , select General settings > Channel
List Copy and press OK.
4 - Select Copy to USB and press OK. You might
be asked to enter the Child Lock PIN code to copy the
channel list.
5 - When copying is done, unplug the USB flash
drive.
6 - Press (left) repeatedly if necessary, to close
the menu.
Now you can upload the copied channel list onto
another Philips TV.
55
Channel list version
Check the current version of the channel list...
1 - Press , select General settings > Channel List
Copy and press OK.
2 - Select Current version, then press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Upload a channel list
To TVs that are not installed
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload, press ,
select General settings and press OK.
4 - Select Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, see chapter Reinstall All Channels. Start this
procedure until you reach the country setting.
Press BACK to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you will need to start a
reinstallation. See chapter Reinstall All Channels and
start the installation. Select the correct country and
skip the channels search. Finish the installation. When
done, continue with step 2.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload, press ,
select General settings and press OK.
4 - Select Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
20.3
Digital Channel Installation
If you know the channel frequency of the channels
you want to install, you can search and store digital
channels one by one. For best results, contact the
service provider.
1 - Press .
2 - Enter the PIN code if asked.
3 - Select Antenna/cable installation and press OK.
4 - Select Digital: Reception Test > Search and
press OK.
5 - Press the numbered buttons to enter the channel
frequency.
6 - Select Search and press OK.
7 - When the channel is found, select Done and
press OK.
20.4
Service Navigation
To switch off…
1 - Press , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Service navigation and press OK.
4 - Select Off and press OK.
5 - Press BACK to close the menu.
56
21
Software
21.1
Update software
Update from Internet
If the TV is connected to the Internet, you may receive
a message to update the TV software. You need a
high-speed (broadband) Internet connection. If you
receive this message, we recommend you to carry out
the update.
With the message on screen, select Update and
follow the instructions on screen.
You can also look for a software update yourself.
During the software update, there is no picture and
the TV will switch off and on again. This might happen
several times. The update can take a few minutes.
Wait until the TV picture comes back up. Do not press
the power switch on the TV or on the remote
control during the software update.
To look for a software update yourself…
1 - Press and press OK.
2 - Select Update Software > Search for
Updates and press OK.
3 - Select Internet and press OK.
4 - The TV will look for an update on the Internet.
5 - If an update is available, you can update the
software right away.
6 - A software update can take several minutes. Do
not press the key on the TV or remote control.
7 - When the update is done, the TV will return to the
channel you were watching.
Update from USB
It might be necessary to update the TV software. You
need a computer with a high-speed Internet
connection and a USB flash drive to upload the
software on the TV. Use a USB flash drive with at least
500MB free space. Make sure that write protection is
switched off.
To update the TV software…
1 - Press and press OK.
2 - Select Update Software > Search for
Updates and press OK.
3 - Select USB and press OK.
Identify the TV
1 - Insert the USB flash drive into one of the USB
connections of the TV.
2 - Select Write to USB and press OK. An
identification file is written on the USB flash drive.
Download the software
1 - Insert the USB flash drive into your computer.
2 - On the USB flash drive, locate the
file update.htm and double click it.
3 - Click Send ID.
4 - If new software is available, download the .zip
file.
5 - After the download, unzip the file and copy the
file autorun.upg onto the USB flash drive. Do not
place this file in a folder.
Update the TV software
1 - Insert the USB Flash Drive into the TV again. The
update starts automatically.
2 - A software update can take several minutes. Do
not press the key on the TV or remote control. Do
not remove the USB flash drive.
3 - When the update is done, the TV will return to the
channel you were watching.
If a power cut occurs during the update, never
remove the USB flash drive from the TV. When the
power returns, the update will continue.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB flash drive.
21.2
Software version
To view the current TV software version…
1 - Press , select Update Software > Current
Software Info and press OK.
2 - The version, Release Version is shown. Also, the
Netflix ESN Number is shown, if available.
3 - Press (left) repeatedly if necessary, to close
the menu.
21.3
Local updates
For dealers and expert users…
1 - Press , select Update Software > Local
updates and press OK.
2 - Follow the on-screen instruction.
3 - Press (left) repeatedly if necessary, to close
the menu.
21.4
Open source software
This television contains open-source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
57
offer is requested by the respective licenses.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to .
. .
open.source@tpvision.com
21.5
Open source license
statement
Acknowledgements and License Texts for any open
source software used in this Philips TV.
This is a document describing the distribution of the
source code used on the Philips TV, which fall either
under the GNU General Public License (the GPL), or
the GNU Lesser General Public License (the LGPL), or
any other open-source license. Instructions to obtain
source code for this software can be found in the user
manual.
PHILIPS MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. Philips offers no support for this
software. The preceding does not affect your
warranties and statutory rights regarding any Philips
product(s) you purchased. It only applies to this
source code made available to you.
21.6
Open-source license
Freetype (2.4.3)
FreeType is a software font engine that is designed to
be small, efficient, highly customizable, and portable
while capable of producing high-quality output
(glyph images).
This piece of software is made available under the
terms and conditions of the FreeType Project license,
which can be found below.
Source: http://freetype.sourceforge.net
zlib (1.2.3)
The 'zlib' compression library provides in-memory
compression and decompression functions, including
integrity checks of the uncompressed data.
This piece of software is made available under the
terms and conditions of the zlib license, which can be
found below.
Source: http://www.zlib.net/
Fraunhofer AAC Ecnoder (3.3.3)
AAC Ecnoder.
Source: Android JB source code
unicode (3.2)
This library is used to perform UNICODE string
manipulation.
This piece of software is made available under the
terms and conditions of the ICU license, which can be
found below.
Source: http://www.icu-project.org/
libpng (1.2.43)
PNG decoder.
This piece of software is made available under the
terms and conditions of the libpng license, which can
be found below.
Source: http://www.libpng.org/pub/png/libpng.html
libjpg (6b)
This library is used to perform JPEG decoding tasks.
This piece of software is made available under the
terms and conditions of the libjpg license, which can
be found below.
Source: http://www.ijg.org/
libmng (1.0.10)
libmng -THE reference library for reading, displaying,
writing and examining Multiple-Image Network
Graphics.MNG is the animation extension to the
popular PNG image-format.
This piece of software is made available under the
terms and conditions of the libmng license, which can
be found below.
Source:
http://sourceforge.net/projects/libmng/files/
u-Boot loader (1.3.4)
Used by boot loader and only linked with boot
loader, GPL license.
This piece of software is made available under the
terms and conditions of the u-Boot loader license,
which can be found below.
Source: http://sourceforge.net/projects/u-boot/files/
u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download
Libcurl (7.21.7)
HTTP client;libcurl is a free and easy-to-use client-
side URL transfer library, supporting FTP, FTPS, HTTP,
HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,
LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl
supports SSL certificates, HTTP POST, HTTP PUT, FTP
uploading, HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM,
Negotiate, Kerberos4), file transfer resume, http proxy
tunneling and more!
This piece of software is made available under the
terms and conditions of the Libcurl license, which can
be found below.
Source: http://curl.haxx.se/
58
c-ares (1.7.4)
c-ares is a C library that performs DNS requests and
name resolves asynchronously.
This piece of software is made available under the
terms and conditions of the c-ares license, which can
be found below.
Source: http://c-ares.haxx.se/c-ares-1.7.1.tar.gz
openssl (1.0.0d)
OpenSSL is an open source implementation of the
SSL and TLS protocols. The core library (written in the
C programming language) implements the basic
cryptographic functions and provides various utility
functions. Wrappers allowing the use of the OpenSSL
library in a variety of computer languages are
available.
This piece of software is made available under the
terms and conditions of the 1.7.4 license, which can be
found below.
Source:
http://www.openssl.org/source/openssl-1.0.0.tar.gz
Expat (2.01)
xml paser; Expat is an XML parser library written in C.
It is a stream-oriented parser in which an application
registers handlers for things the parser might find in
the XML document (like start tags). An introductory
article on using.
This piece of software is made available under the
terms and conditions of the Expat license, which can
be found below.
Source: http://expat.sourceforge.net/
DirectFB include SAWMAN (1.4.0)
It is a software library for GNU/Linux/UNIX based
operating system with a small memory footprint that
provides graphics acceleration, input device handling
and abstraction layer, and integrated windowing
system with support for translucent windows and
multiple display layers on top of the Linux
framebuffer without requiring any kernel
modifications.
This piece of software is made available under the
terms and conditions of the DirectFB license, which
can be found below.
Source: http://sourceforge.net/projects/jointspace/fil
es/remote_applications_SDK/remote_spplications_S
DK_v1.3.1/DirectFB141_source_1.3.1.7z/download
SAWMAN
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
Source: http://squashfs.sourceforge.net/
Linux Kernel (3.0)
The Linux kernel is an operating system kernel used
by the Linux family of Unix-like operating systems.
This piece of software is made available under the
terms and conditions of the Linux Kernel license,
which can be found below.
Source: http://www.kernel.org
SQLite (3.7.2)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
This piece of software is made available under the
terms and conditions of the SQLite license, which can
be found below.
Source: http://www.sqlite.org/download.html
SquashFS (3.4)
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the
terms and conditions of the SquashFS license, which
can be found below.
Source: http://squashfs.sourceforge.net/
glibc (2.6.1)
Any Unix-like operating system needs a C library: the
library which defines the ``system calls'' and other
basic facilities such as open, malloc, printf, exit...The
GNU C library is used as the C library in the GNU
system and most systems with the Linux kernel
This piece of software is made available under the
terms and conditions of the glibc license, which can
be found below.
Source: http://www.gnu.org/software/libc/
mtd-utils (1)
The aim of the system is to make it simple to provide
a driver for new hardware, by providing a generic
interface between the hardware drivers and the upper
layers of the system. Hardware drivers need to know
nothing about the storage formats used, such as FTL,
FFS2, etc., but will only need to provide simple
routines for read, write and erase. Presentation of the
device's contents to the user in an appropriate form
will be handled by the upper layers of the system.
This piece of software is made available under the
terms and conditions of the mtd-utils license, which
can be found below.
Source: http://www.linux-
mtd.infradead.org/index.html
libusb (1.0.6)
This is the home of libusb, a library that gives user
level applications uniform access to USB devices
across many different operating systems. libusb is an
open source project licensed under the GNU Lesser
General Public License version 2.1.Many participants
59
in the libusb community have helped and continue to
help with ideas, implementation, support and
improvements for libusb.
This piece of software is made available under the
terms and conditions of the libusb license, which can
be found below.
Source:
http://libusb.wiki.sourceforge.net
http://www.libusb.org/
libusb-compat (0.1.3)
Library to enable user space application programs to
communicate with USB devices.
This piece of software is made available under the
terms and conditions of the libusb-compat license,
which can be found below.
Source:
http://libusb.wiki.sourceforge.net/LibusbCompat0.1
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform
implementation of the Microsoft Windows NTFS file
system with read-write support. NTFS-3G often uses
the FUSE file system interface, so it can run
unmodified on many different operating systems. It is
runnable on Linux, FreeBSD, NetBSD, OpenSolaris,
BeOS, QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed under
either the GNU General Public License or a
proprietary license. It is a partial fork of ntfsprogs and
is under active maintenance and development.
This piece of software is made available under the
terms and conditions of the NTFS-3G Read/Write
Driver license, which can be found below.
Source: http://www.tuxera.com
WPA Supplicant (0.5.10 & 0.6.7)
These packages are used to provide WiFi access.The
supplier for these tools is Atheros.These pieces of
software are made available under the terms and
conditions of the GPL v2 license, which can be found
below.
This piece of software is made available under the
terms and conditions of the WPA Supplicant license,
which can be found below.
Source: http://hostap.epitest.fi/wpa_supplicant/
ntfsprogs (2.0.0)
Some useful tool for ntfs file sytem.
This piece of software is made available under the
terms and conditions of the ntfsprogs license, which
can be found below.
Source: http://sourceforge.net/projects/linux-ntfs
fuse (2.8.4)
Fuse is a simple interface for userspace programs to
export a virtual filesystem to the linux kernel.
This piece of software is made available under the
terms and conditions of the fuse license, which can
be found below.
Source: http://fuse.sourceforge.net/
libiconv (1.11.1)
This library provides an iconv() implementation, for
use on systems which don't have one, or whose
implementation cannot convert from/to Unicode. .
This piece of software is made available under the
terms and conditions of the libiconv license, which
can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
electric-fence (2.1.13)
Used for memory corruption detection.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: http://perens.com/FreeSoftware/ElectricFenc
e/electric-fence_2.1.13-0.1.tar.gz
liveMedia
When Wifi Display or streaming RtspPlayer are
enabled.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: www.live555.com
QT (4.7.0)
Netflix skpe besttv pandora picasa? will use QT.
This piece of software is made available under the
terms and conditions of the QT license, which can be
found below.
Source: http://qt.nokia.com/
e2fsprogs (1.41.14)
e2fsprogs provides the filesystem utilities for use with
the ext2 filesystem, it also supports the ext3 and ext4
filesystems.
This piece of software is made available under the
terms and conditions of the e2fsprogs license, which
can be found below.
Source: http://e2fsprogs.sourceforge.net/
alsa (1.0.24.1)
Advanced Linux Sound Architecture (ALSA).
This piece of software is made available under the
terms and conditions of the alsa license, which can be
found below.
Source: http://www.alsa-project.org
lvm2 (2.02.89)
DM_VERITY.
This piece of software is made available under the
terms and conditions of the lvm2 license, which can
be found below.
Source:
ftp://sources.redhat.com/pub/lvm2/releases/
encfs (1.3.2)
A library provides an encrypted filesystem in user-
60
space.
Source: http://www.arg0.net/encfs
boost (1.15.0)
A library provides free peer-reviewed portable C++
source libraries is used for encfs.
Source: http://www.boost.org
rlog (1.4)
A library that provides a flexible message logging
facility for C programs and libraries is used for encfs.
Source: http://www.arg0.net/rlog
iptables (1.4.15)
For Cross connection.
Source: http://www.netfilter.org/projects/iptables/
bash (3.2.48)
Bash is the shell, or command language interpreter,
that will appear in the GNU operating system.
Bash is an sh-compatible shell that incorporates
useful features from the Korn shell (ksh) and C shell
(csh).
It is intended to conform to the IEEE POSIX
P1003.2/ISO 9945.2 Shell and Tools standard.
It offers functional improvements over sh for both
programming and interactive use.
In addition, most sh scripts can be run by Bash
without modification.
Source: http://www.gnu.org/software/bash/
coreutils (6.9)
The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
These are the core utilities which are expected to
exist on every operating system.
Source: http://www.gnu.org/software/coreutils/
findutils (4.2.31)
The GNU Find Utilities are the basic directory
searching utilities of the GNU operating system.
These programs are typically used in conjunction with
other programs to provide modular and powerful
directory search and file locating capabilities to other
commands.
Source: http://www.gnu.org/software/findutils/
gawk (3.1.5)
If you are like many computer users, you would
frequently like to make changes in various text files
wherever certain patterns appear, or extract data from
parts of certain lines while discarding the rest.
To write a program to do this in a language such as C
or Pascal is a time-consuming inconvenience that
may take many lines of code.
The job is easy with awk, especially the GNU
implementation: gawk.
Source: http://www.gnu.org/software/gawk/
grep (2.5.1a)
The grep command searches one or more input files
for lines containing a match to a specified pattern. By
default, grep prints the matching lines.
Source: http://www.gnu.org/software/grep/
gzip (1.3.12)
GNU Gzip is a popular data compression program
originally written by Jean-loup Gailly for the GNU
project. Mark Adler wrote the decompression part.
Source: http://www.gnu.org/software/gzip/
inetutils (1.4.2)
Inetutils is a collection of common network
programs.
Source: http://www.gnu.org/software/inetutils/
iputils (s20101006)
The iputils package is set of small useful utilities for
Linux networking. It was originally maintained by
Alexey Kuznetsov.
Source: http://www.skbuff.net/iputils/
module-init-tools (3.12)
Provides developer documentation for the utilities
used by Linux systems to load and manage kernel
modules (commonly referred to as "drivers").
Source: https://modules.wiki.kernel.org/index.php/M
ain_Page
ncurses (5.7)
The Ncurses (new curses) library is a free software
emulation of curses in System V Release 4.0, and
more.
It uses Terminfo format, supports pads and color and
multiple highlights and forms characters and function-
key mapping, and has all the other SYSV-curses
enhancements over BSD Curses.
Source: http://www.gnu.org/software/ncurses/
net-tools (1.6)
The Net-tools?package is a collection of programs for
controlling the network subsystem of the Linux
kernel.
Source: http://www.linuxfromscratch.org/blfs/view/6.
3/basicnet/net-tools.html
procps (ps, top) (3.2.8)
procps is the package that has a bunch of small
useful utilities that give information about processes
using the /proc filesystem.
The package includes the programs ps, top, vmstat, w,
kill, free, slabtop, and skill.
Source: http://procps.sourceforge.net/index.html
psmisc (22.13)
This PSmisc package is a set of some small useful
utilities that use the proc filesystem. We're not about
changing the world, but providing the system
administrator with some help in common tasks.
Source: http://psmisc.sourceforge.net/
61
sed (4.1.5)
sed (stream editor) isn't an interactive text editor.
Instead, it is used to filter text, i.e., it takes text input,
performs some operation (or set of operations) on it,
and outputs the modified text.
sed is typically used for extracting part of a file using
pattern matching or substituting multiple occurrences
of a string within a file.
Source: http://www.gnu.org/software/sed/
tar (1.17)
GNU Tar provides the ability to create tar archives, as
well as various other kinds of manipulation.
For example, you can use Tar on previously created
archives to extract files, to store additional files, or to
update or list files which were already stored.
Source: http://www.gnu.org/software/tar/
util-linux-ng (2.18)
Various system utilities.
Source: http://userweb.kernel.org/~kzak/util-linux-
ng/
udhcpc (0.9.8cvs20050303-3)
Udhcpc is a very small?DHCP?client geared
towards?embedded systems.
Source: http://udhcp.sourcearchive.com/downloads/
0.9.8cvs20050303-3/
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a support
for the execution of NCL application. This library was
developed for the GNOME software suite and is
available under a "MIT" license.
Source: http://www.xmlsoft.org
uriparser (0.7.7)
For MPEG-DASH
Source: http://uriparser.sourceforge.net/
xerces-c++ (3.1.1)
For MPEG-DASH
Source: http://xerces.apache.org/
webp (0.2.1)
For Netflix
Source: https://code.google.com/p/webp/
wget (1.10.2)
GNU Wget is a free software package for retrieving
files using HTTP, HTTPS and FTP, the most widely-
used Internet protocols.
It is a non-interactive commandline tool, so it may
easily be called from scripts,?cron?jobs, terminals
without X-Windows support, etc.
Source:
http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
wireless_tools (0.29)
The Wireless Tools (WT)?is a set of tools allowing to
manipulate the Wireless Extensions.
They use a textual interface and are rather crude, but
aim to support the full Wireless Extension.
Source: http://www.hpl.hp.com/personal/Jean_Tourri
lhes/Linux/Tools.html
ezxml (0.8.6)
ezXML is a C library for parsing XML documents. Used
inside Philips libraries.
Source: http://sourceforge.net/projects/ezxml/
SQLite (3.7.7.1)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
Source: http://www.sqlite.org/download.html
AES (aes-src-29-04-09.zip)
Advanced Encryption Standard (AES) is a
specification for the encryption of electronic data.
Used inside Philips libraries.
Source: http://gladman.plushost.co.uk/oldsite/AES/
microhttpd (libmicrohttpd-0.9.9.tar.gz)
GNU libmicrohttpd is a small C library that is
supposed to make it easy to run an HTTP server as
part of another application.
The original download site for this software is :
http://www.gnu.org/software/libmicrohttpd/This
piece of software is made available under the terms
and conditions of the LGPL v2.1 license
Source: http://ftp.gnu.org/gnu/libmicrohttpd/libmicro
httpd-0.9.9.tar.gz
yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)
YAJL is a small event-driven (SAX-style) JSON parser
written in ANSI C, and a small validating JSON
generator. YAJL is released under the ISC license.
The original download site for this software is :
http://lloyd.github.com/yajl/This piece of software is
made available under the terms and conditions of the
ISC license
Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/
lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21
82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz
HMAC-SHA1 (0.1)
keyed-hash message authentication code (HMAC) is
a specific construction for calculating a message
authentication code (MAC) involving a cryptographic
hash function in combination with a secret
cryptographic key.
As with any MAC, it may be used to simultaneously
verify both the data integrity and the authentication
of a message.
Any cryptographic hash function, such as MD5 or
SHA-1, may be used in the calculation of an HMAC;
the resulting MAC algorithm is termed HMAC-MD5 or
HMAC-SHA1 accordingly.
62
Source:
http://www.deadhat.com/wlancrypto/hmac_sha1.c
gSoap (2.7.15)
The gSOAP toolkit is an open source C and C++
software development toolkit for SOAP/XML Web
services and generic (non-SOAP) C/C++ XML data
bindings.
Part of the software embedded in this product is
gSOAP software. Portions created by gSOAP are
Copyright 2000-2011 Robert A. van Engelen, Genivia
inc. All Rights Reserved.
Source: http://sourceforge.net/projects/gsoap2/
jquery (1.10.2)
jQuery is a fast and concise JavaScript Library that
simplifies HTML document traversing, event handling,
animating, and Ajax interactions for rapid web
development.
Source: http://jquery.com/
Libupnp (1.2.1)
The Linux* SDK for UPnP* Devices (libupnp) provides
developers with an API and open source code for
building control points, devices, and bridges that are
compliant with Version 1.0 of the UPnP Device
Architecture Specification.
Source: http://upnp.sourceforge.net/
mDNSResponder (mDNSResponder-320.10.80)
The mDNSResponder project is a component of
Bonjour,
Apple's ease-of-use IP networking
initiative:<http://developer.apple.com/bonjour/>
In our project, Bonjour is used for the automatic
discovery of devices and services
Source: http://developer.apple.com/bonjour/Acknow
ledgements and License Texts for any open source
software used in this Philips TV.
This is a document describing the distribution of the
source code used on the Philips TV, which fall either
under the GNU General Public License (the GPL), or
the GNU Lesser General Public License (the LGPL), or
any other open source license. Instructions to obtain
source code for this software can be found in the user
manual.
PHILIPS MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. Philips offers no support for this
software. The preceding does not affect your
warranties and statutory rights regarding any Philips
product(s) you purchased. It only applies to this
source code made available to you.
Freetype (2.4.3)
FreeType is a software font engine that is designed to
be small, efficient, highly customizable, and portable
while capable of producing high-quality output
(glyph images).
This piece of software is made available under the
terms and conditions of the FreeType Project license,
which can be found below.
Source: http://freetype.sourceforge.net
zlib (1.2.3)
The 'zlib' compression library provides in-memory
compression and decompression functions, including
integrity checks of the uncompressed data.
This piece of software is made available under the
terms and conditions of the zlib license, which can be
found below.
Source: http://www.zlib.net/
Fraunhofer AAC Ecnoder (3.3.3)
AAC Ecnoder.
Source: Android JB source code
unicode (3.2)
This library is used to perform UNICODE string
manipulation.
This piece of software is made available under the
terms and conditions of the ICU license, which can be
found below.
Source: http://www.icu-project.org/
libpng (1.2.43)
PNG decoder.
This piece of software is made available under the
terms and conditions of the libpng license, which can
be found below.
Source: http://www.libpng.org/pub/png/libpng.html
libjpg (6b)
This library is used to perform JPEG decoding tasks.
This piece of software is made available under the
terms and conditions of the libjpg license, which can
be found below.
Source: http://www.ijg.org/
libmng (1.0.10)
libmng -THE reference library for reading, displaying,
writing and examining Multiple-Image Network
Graphics.MNG is the animation extension to the
popular PNG image-format.
This piece of software is made available under the
terms and conditions of the libmng license, which can
be found below.
Source:
http://sourceforge.net/projects/libmng/files/
u-Boot loader (1.3.4)
Used by boot loader and only linked with boot
loader, GPL license.
This piece of software is made available under the
terms and conditions of the u-Boot loader license,
which can be found below.
63
Source: http://sourceforge.net/projects/u-boot/files/
u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download
Libcurl (7.21.7)
HTTP client;libcurl is a free and easy-to-use client-
side URL transfer library, supporting FTP, FTPS, HTTP,
HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,
LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl
supports SSL certificates, HTTP POST, HTTP PUT, FTP
uploading, HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM,
Negotiate, Kerberos4), file transfer resume, http proxy
tunneling and more!
This piece of software is made available under the
terms and conditions of the Libcurl license, which can
be found below.
Source: http://curl.haxx.se/
c-ares (1.7.4)
c-ares is a C library that performs DNS requests and
name resolves asynchronously.
This piece of software is made available under the
terms and conditions of the c-ares license, which can
be found below.
Source: http://c-ares.haxx.se/c-ares-1.7.1.tar.gz
openssl (1.0.0d)
OpenSSL is an open source implementation of the
SSL and TLS protocols. The core library (written in the
C programming language) implements the basic
cryptographic functions and provides various utility
functions. Wrappers allowing the use of the OpenSSL
library in a variety of computer languages are
available.
This piece of software is made available under the
terms and conditions of the 1.7.4 license, which can be
found below.
Source:
http://www.openssl.org/source/openssl-1.0.0.tar.gz
Expat (2.01)
xml paser; Expat is an XML parser library written in C.
It is a stream-oriented parser in which an application
registers handlers for things the parser might find in
the XML document (like start tags). An introductory
article on using.
This piece of software is made available under the
terms and conditions of the Expat license, which can
be found below.
Source: http://expat.sourceforge.net/
DirectFB include SAWMAN (1.4.0)
It is a software library for GNU/Linux/UNIX based
operating system with a small memory footprint that
provides graphics acceleration, input device handling
and abstraction layer, and integrated windowing
system with support for translucent windows and
multiple display layers on top of the Linux
framebuffer without requiring any kernel
modifications.
This piece of software is made available under the
terms and conditions of the DirectFB license, which
can be found below.
Source: http://sourceforge.net/projects/jointspace/fil
es/remote_applications_SDK/remote_spplications_S
DK_v1.3.1/DirectFB141_source_1.3.1.7z/download
SAWMAN
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
Source: http://squashfs.sourceforge.net/
Linux Kernel (3.0)
The Linux kernel is an operating system kernel used
by the Linux family of Unix-like operating systems.
This piece of software is made available under the
terms and conditions of the Linux Kernel license,
which can be found below.
Source: http://www.kernel.org
SQLite (3.7.2)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
This piece of software is made available under the
terms and conditions of the SQLite license, which can
be found below.
Source: http://www.sqlite.org/download.html
SquashFS (3.4)
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the
terms and conditions of the SquashFS license, which
can be found below.
Source: http://squashfs.sourceforge.net/
glibc (2.6.1)
Any Unix-like operating system needs a C library: the
library which defines the ``system calls'' and other
basic facilities such as open, malloc, printf, exit...The
GNU C library is used as the C library in the GNU
system and most systems with the Linux kernel
This piece of software is made available under the
terms and conditions of the glibc license, which can
be found below.
Source: http://www.gnu.org/software/libc/
mtd-utils (1)
The aim of the system is to make it simple to provide
a driver for new hardware, by providing a generic
interface between the hardware drivers and the upper
64
layers of the system. Hardware drivers need to know
nothing about the storage formats used, such as FTL,
FFS2, etc., but will only need to provide simple
routines for read, write and erase. Presentation of the
device's contents to the user in an appropriate form
will be handled by the upper layers of the system.
This piece of software is made available under the
terms and conditions of the mtd-utils license, which
can be found below.
Source: http://www.linux-
mtd.infradead.org/index.html
libusb (1.0.6)
This is the home of libusb, a library that gives user
level applications uniform access to USB devices
across many different operating systems. libusb is an
open source project licensed under the GNU Lesser
General Public License version 2.1.Many participants
in the libusb community have helped and continue to
help with ideas, implementation, support and
improvements for libusb.
This piece of software is made available under the
terms and conditions of the libusb license, which can
be found below.
Source:
http://libusb.wiki.sourceforge.net
http://www.libusb.org/
libusb-compat (0.1.3)
Library to enable user space application programs to
communicate with USB devices.
This piece of software is made available under the
terms and conditions of the libusb-compat license,
which can be found below.
Source:
http://libusb.wiki.sourceforge.net/LibusbCompat0.1
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform
implementation of the Microsoft Windows NTFS file
system with read-write support. NTFS-3G often uses
the FUSE file system interface, so it can run
unmodified on many different operating systems. It is
runnable on Linux, FreeBSD, NetBSD, OpenSolaris,
BeOS, QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed under
either the GNU General Public License or a
proprietary license. It is a partial fork of ntfsprogs and
is under active maintenance and development.
This piece of software is made available under the
terms and conditions of the NTFS-3G Read/Write
Driver license, which can be found below.
Source: http://www.tuxera.com
WPA Supplicant (0.5.10 & 0.6.7)
These packages are used to provide WiFi access.The
supplier for these tools is Atheros.These pieces of
software are made available under the terms and
conditions of the GPL v2 license, which can be found
below.
This piece of software is made available under the
terms and conditions of the WPA Supplicant license,
which can be found below.
Source: http://hostap.epitest.fi/wpa_supplicant/
ntfsprogs (2.0.0)
Some useful tool for ntfs file sytem.
This piece of software is made available under the
terms and conditions of the ntfsprogs license, which
can be found below.
Source: http://sourceforge.net/projects/linux-ntfs
fuse (2.8.4)
Fuse is a simple interface for userspace programs to
export a virtual filesystem to the linux kernel.
This piece of software is made available under the
terms and conditions of the fuse license, which can
be found below.
Source: http://fuse.sourceforge.net/
libiconv (1.11.1)
This library provides an iconv() implementation, for
use on systems which don't have one, or whose
implementation cannot convert from/to Unicode. .
This piece of software is made available under the
terms and conditions of the libiconv license, which
can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
electric-fence (2.1.13)
Used for memory corruption detection.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: http://perens.com/FreeSoftware/ElectricFenc
e/electric-fence_2.1.13-0.1.tar.gz
liveMedia
When Wifi Display or streaming RtspPlayer are
enabled.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: www.live555.com
QT (4.7.0)
Netflix skpe besttv pandora picasa? will use QT.
This piece of software is made available under the
terms and conditions of the QT license, which can be
found below.
Source: http://qt.nokia.com/
e2fsprogs (1.41.14)
e2fsprogs provides the filesystem utilities for use with
the ext2 filesystem, it also supports the ext3 and ext4
filesystems.
This piece of software is made available under the
terms and conditions of the e2fsprogs license, which
can be found below.
Source: http://e2fsprogs.sourceforge.net/
65
alsa (1.0.24.1)
Advanced Linux Sound Architecture (ALSA).
This piece of software is made available under the
terms and conditions of the alsa license, which can be
found below.
Source: http://www.alsa-project.org
lvm2 (2.02.89)
DM_VERITY.
This piece of software is made available under the
terms and conditions of the lvm2 license, which can
be found below.
Source:
ftp://sources.redhat.com/pub/lvm2/releases/
encfs (1.3.2)
A library provides an encrypted filesystem in user-
space.
Source: http://www.arg0.net/encfs
boost (1.15.0)
A library provides free peer-reviewed portable C++
source libraries is used for encfs.
Source: http://www.boost.org
rlog (1.4)
A library that provides a flexible message logging
facility for C programs and libraries is used for encfs.
Source: http://www.arg0.net/rlog
iptables (1.4.15)
For Cross connection.
Source: http://www.netfilter.org/projects/iptables/
bash (3.2.48)
Bash is the shell, or command language interpreter,
that will appear in the GNU operating system.
Bash is an sh-compatible shell that incorporates
useful features from the Korn shell (ksh) and C shell
(csh).
It is intended to conform to the IEEE POSIX
P1003.2/ISO 9945.2 Shell and Tools standard.
It offers functional improvements over sh for both
programming and interactive use.
In addition, most sh scripts can be run by Bash
without modification.
Source: http://www.gnu.org/software/bash/
coreutils (6.9)
The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
These are the core utilities which are expected to
exist on every operating system.
Source: http://www.gnu.org/software/coreutils/
findutils (4.2.31)
The GNU Find Utilities are the basic directory
searching utilities of the GNU operating system.
These programs are typically used in conjunction with
other programs to provide modular and powerful
directory search and file locating capabilities to other
commands.
Source: http://www.gnu.org/software/findutils/
gawk (3.1.5)
If you are like many computer users, you would
frequently like to make changes in various text files
wherever certain patterns appear, or extract data from
parts of certain lines while discarding the rest.
To write a program to do this in a language such as C
or Pascal is a time-consuming inconvenience that
may take many lines of code.
The job is easy with awk, especially the GNU
implementation: gawk.
Source: http://www.gnu.org/software/gawk/
grep (2.5.1a)
The grep command searches one or more input files
for lines containing a match to a specified pattern. By
default, grep prints the matching lines.
Source: http://www.gnu.org/software/grep/
gzip (1.3.12)
GNU Gzip is a popular data compression program
originally written by Jean-loup Gailly for the GNU
project. Mark Adler wrote the decompression part.
Source: http://www.gnu.org/software/gzip/
inetutils (1.4.2)
Inetutils is a collection of common network
programs.
Source: http://www.gnu.org/software/inetutils/
iputils (s20101006)
The iputils package is set of small useful utilities for
Linux networking. It was originally maintained by
Alexey Kuznetsov.
Source: http://www.skbuff.net/iputils/
module-init-tools (3.12)
Provides developer documentation for the utilities
used by Linux systems to load and manage kernel
modules (commonly referred to as "drivers").
Source: https://modules.wiki.kernel.org/index.php/M
ain_Page
ncurses (5.7)
The Ncurses (new curses) library is a free software
emulation of curses in System V Release 4.0, and
more.
It uses Terminfo format, supports pads and color and
multiple highlights and forms characters and function-
key mapping, and has all the other SYSV-curses
enhancements over BSD Curses.
Source: http://www.gnu.org/software/ncurses/
net-tools (1.6)
The Net-tools?package is a collection of programs for
controlling the network subsystem of the Linux
kernel.
66
Source: http://www.linuxfromscratch.org/blfs/view/6.
3/basicnet/net-tools.html
procps (ps, top) (3.2.8)
procps is the package that has a bunch of small
useful utilities that give information about processes
using the /proc filesystem.
The package includes the programs ps, top, vmstat, w,
kill, free, slabtop, and skill.
Source: http://procps.sourceforge.net/index.html
psmisc (22.13)
This PSmisc package is a set of some small useful
utilities that use the proc filesystem. We're not about
changing the world, but providing the system
administrator with some help in common tasks.
Source: http://psmisc.sourceforge.net/
sed (4.1.5)
sed (stream editor) isn't an interactive text editor.
Instead, it is used to filter text, i.e., it takes text input,
performs some operation (or set of operations) on it,
and outputs the modified text.
sed is typically used for extracting part of a file using
pattern matching or substituting multiple occurrences
of a string within a file.
Source: http://www.gnu.org/software/sed/
tar (1.17)
GNU Tar provides the ability to create tar archives, as
well as various other kinds of manipulation.
For example, you can use Tar on previously created
archives to extract files, to store additional files, or to
update or list files which were already stored.
Source: http://www.gnu.org/software/tar/
util-linux-ng (2.18)
Various system utilities.
Source: http://userweb.kernel.org/~kzak/util-linux-
ng/
udhcpc (0.9.8cvs20050303-3)
Udhcpc is a very small?DHCP?client geared
towards?embedded systems.
Source: http://udhcp.sourcearchive.com/downloads/
0.9.8cvs20050303-3/
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a support
for the execution of NCL application. This library was
developed for the GNOME software suite and is
available under a "MIT" license.
Source: http://www.xmlsoft.org
uriparser (0.7.7)
For MPEG-DASH
Source: http://uriparser.sourceforge.net/
xerces-c++ (3.1.1)
For MPEG-DASH
Source: http://xerces.apache.org/
webp (0.2.1)
For Netflix
Source: https://code.google.com/p/webp/
wget (1.10.2)
GNU Wget is a free software package for retrieving
files using HTTP, HTTPS and FTP, the most widely-
used Internet protocols.
It is a non-interactive commandline tool, so it may
easily be called from scripts,?cron?jobs, terminals
without X-Windows support, etc.
Source:
http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
wireless_tools (0.29)
The Wireless Tools (WT)?is a set of tools allowing to
manipulate the Wireless Extensions.
They use a textual interface and are rather crude, but
aim to support the full Wireless Extension.
Source: http://www.hpl.hp.com/personal/Jean_Tourri
lhes/Linux/Tools.html
ezxml (0.8.6)
ezXML is a C library for parsing XML documents. Used
inside Philips libraries.
Source: http://sourceforge.net/projects/ezxml/
SQLite (3.7.7.1)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
Source: http://www.sqlite.org/download.html
AES (aes-src-29-04-09.zip)
Advanced Encryption Standard (AES) is a
specification for the encryption of electronic data.
Used inside Philips libraries.
Source: http://gladman.plushost.co.uk/oldsite/AES/
microhttpd (libmicrohttpd-0.9.9.tar.gz)
GNU libmicrohttpd is a small C library that is
supposed to make it easy to run an HTTP server as
part of another application.
The original download site for this software is :
http://www.gnu.org/software/libmicrohttpd/This
piece of software is made available under the terms
and conditions of the LGPL v2.1 license
Source: http://ftp.gnu.org/gnu/libmicrohttpd/libmicro
httpd-0.9.9.tar.gz
yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)
YAJL is a small event-driven (SAX-style) JSON parser
written in ANSI C, and a small validating JSON
generator. YAJL is released under the ISC license.
The original download site for this software is :
http://lloyd.github.com/yajl/This piece of software is
made available under the terms and conditions of the
ISC license
67
Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/
lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21
82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz
HMAC-SHA1 (0.1)
keyed-hash message authentication code (HMAC) is
a specific construction for calculating a message
authentication code (MAC) involving a cryptographic
hash function in combination with a secret
cryptographic key.
As with any MAC, it may be used to simultaneously
verify both the data integrity and the authentication
of a message.
Any cryptographic hash function, such as MD5 or
SHA-1, may be used in the calculation of an HMAC;
the resulting MAC algorithm is termed HMAC-MD5 or
HMAC-SHA1 accordingly.
Source:
http://www.deadhat.com/wlancrypto/hmac_sha1.c
gSoap (2.7.15)
The gSOAP toolkit is an open source C and C++
software development toolkit for SOAP/XML Web
services and generic (non-SOAP) C/C++ XML data
bindings.
Part of the software embedded in this product is
gSOAP software. Portions created by gSOAP are
Copyright 2000-2011 Robert A. van Engelen, Genivia
inc. All Rights Reserved.
Source: http://sourceforge.net/projects/gsoap2/
jquery (1.10.2)
jQuery is a fast and concise JavaScript Library that
simplifies HTML document traversing, event handling,
animating, and Ajax interactions for rapid web
development.
Source: http://jquery.com/
Libupnp (1.2.1)
The Linux* SDK for UPnP* Devices (libupnp) provides
developers with an API and open source code for
building control points, devices, and bridges that are
compliant with Version 1.0 of the UPnP Device
Architecture Specification.
Source: http://upnp.sourceforge.net/
mDNSResponder (mDNSResponder-320.10.80)
The mDNSResponder project is a component of
Bonjour,
Apple's ease-of-use IP networking
initiative:<http://developer.apple.com/bonjour/>
In our project, Bonjour is used for the automatic
discovery of devices and services
Source: http://developer.apple.com/bonjour/
68
22
Specifications
22.1
Environmental
Saving energy
Energy saving
This Picture style sets the picture in the most ideal
energy conscious setting.
For more information, press Keywords and look
up Picture style.
Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
Select Screen off and press OK. To turn the screen
back on, press any key on the remote control.
Switch off timer
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no input signal
nor remote control commands for 10 minutes, the TV
turns off automatically to save energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, you should deactivate
the automatic turn off.
In addition to the Eco settings, your TV also has
environmentally friendly technology with regard to
power consumption.
End of use
Disposal of your old product and batteries
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2012/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. Correct disposal of your old
product helps to prevent potential negative
consequences for the environment and human
health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
for the environment and human health.
22.2
Power
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Power
• Mains power: AC 110–240 V +/-10%
• Ambient temperature: 5°C to 35°C
• Power saving features: Eco mode, Picture mute (for
radio), Auto turn-off timer, Eco settings menu.
22.3
Reception
• Antenna input: 75 ohm coaxial (F-type)
• TV system: PAL-M, PAL-N, NTSC-M, SATVD-T,
SBTVD-T
• Video playback: NTSC, PAL, SECAM
69
22.4
Display
Type
Diagonal screen size
• 32PHx5102: 32 inch (80 cm)
Display resolution
• 1366 x 768p
Diagonal screen size
• 43PFx5102: 43 inch (108 cm)
• 49PFx5102: 49 inch (123 cm)
Display resolution
• 1920 x 1080p
Input resolution
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz
Computer formats
Resolutions (among others)
• 640 x 480p - 60 Hz
• 800 x 600p - 60 Hz
• 1024 x 768p - 60 Hz
• 1280 x 768p - 60 Hz
• 1360 x 765p - 60 Hz
• 1360 x 768p - 60 Hz
• 1280 x 1024p - 60 Hz
• 1920 x 1080p - 60 Hz
22.5
Dimensions and Weights
32PHx5102
• without TV stand:
Width 732.5 mm - Height 429.6 mm - Depth
63.6 mm - Weight ± 4.92 kg
• with TV stand:
Width 732.5 mm - Height 492 mm - Depth
179.2 mm - Weight ± 5.05 kg
43PFx5102
• without TV stand:
Width 968.2 mm - Height 562.4 mm - Depth
63.6 mm - Weight ± 8.45 kg
• with TV stand:
Width 968.2 mm - Height 623.6 mm - Depth
193.9 mm - Weight ± 8.58 kg
49PFx5102
• without TV stand:
Width 1099.2 mm - Height 631.9 mm - Depth
79 mm - Weight ± 10.62 kg
• with TV stand:
Width 1099.2 mm - Height 688.6 mm - Depth
214.4 mm - Weight ± 10.82 kg
22.6
Connectivity
TV Side
• HDMI 1 in - MHL
• HDMI 2 in
• USB 1
• USB 2
• 1x Serv.U
• Antenna (75 ohm)
TV Bottom
• CVBS/Y Pb Pr: CVBS/Y Pb Pr, Audio L/R
• HDMI 3 in - ARC
• SPDIF: Digital Audio Out-Optical
• Network LAN - RJ45
• Headphones - Stereo mini-jack 3.5mm
22.7
Sound
• HD Stereo
• Output power (RMS): 10W
• Dolby Audio ™
• DTS 2.0+ Digital out™
22.8
Multimedia
Connections
• USB 2.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11a/b/g/n (built-in)
Supported USB file systems
• FAT 16, FAT 32, NTFS
Playback formats
• Containers: 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS,
MPEG-4, Matroska (MKV), QuickTime (MOV, M4V,
M4A), Windows Media (ASF/WMV/WMA)
• Video Codecs: MPEG-1, MPEG-2, MPEG-4 Part 2,
MPEG-4 Part 10 AVC (H.264), VC-1, WMV9, HEVC,
VP9
• Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB,
Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital
Out™, MPEG-1/2/2.5 Layer I/II/III (includes MP3),
70
WMA (v2 to v9.2), WMA Pro (v9/v10)
• Subtitles:
– Formats: SAMI, SubRip (SRT), SubViewer (SUB),
MicroDVD (TXT), mplayer2 (TXT), TMPlayer (TXT)
• Image Codecs: JPEG
• Limitations:
– Maximum supported total bit rate for a media file is
30Mbps.
– Maximum supported video bit rate for a media file
is 20Mbps.
– MPEG-4 AVC (H.264) is supported up to High
Profile @ L4.1.
– VC-1 is supported up to Advanced Profile @ L3.
Wi-Fi Certified
This TV supports Miracast certified devices.
Supported media server software (DMS)
• You can use any DLNA V1.5 certified media server
software (DMS class).
• You can use the Philips TV Remote app (iOS and
Android) on mobile devices.
Performance may vary, depending on the capabilities
of the mobile device and the software used.
71
23
Troubleshooting
and support
23.1
Register your TV
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
Go to www.philips.com/welcome
23.2
Help
Introduction
This TV offers help on screen.
Open Help
1 - Press to open the Home menu.
2 - Select Help and press OK.
To search for topics alphabetically, select Keywords .
To read the Help as a book, select Book.
Before you execute the Help instructions, close Help.
To close Help, press .
Direct help
Press the key (blue) to open Help immediately.
Help will open on the chapter that is most relevant to
what you are doing or what is selected on TV.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant
Help page from your computer.
To download the Help (user manual) go
to www.philips.com/support
Check the TV
The TV can play a short High-Definition (HD) video
clip. During the playback, check if the picture, the
sound are working OK. Switch to the TV source with
the problem before you start the video clip.
Press the key (blue) to open Help immediately.
Check the Network
With Check the Network, you can check your TV
wirelessly or wired to your network router.
User manual
Press the key (blue) to open Help immediately.
Help will open on the chapter that is most relevant
to what you are doing or what is selected on the TV.
To look up topics alphabetically, press the
color key Keywords.
To read the Help as a book, select Book. Before you
execute the Help instructions, close Help. To close
Help, press the color key Close.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions
more easily, you can download the TV Help in PDF
format to read on your smartphone, tablet
or computer. Alternatively, you can print the
relevant Help page from your computer.
Contact info
You can view the contact information of the local
service center on this page.
23.3
Troubleshooting
Power on and remote control
The TV does not switch on
• Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
• Make sure that the power cable is securely
connected.
Creaking sound at startup or power off
When you are turning the TV on, off or to standby,
you hear a creaking sound from the TV chassis. The
creaking sound is due to the normal expansion and
contraction of the TV as it cools and warms up. This
does not affect performance.
TV does not respond to the remote control
The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behavior.
72
If the TV continues to be unresponsive to the remote
control, you can check if the remote control is working
by means of a mobile phone camera. Put the phone
in camera mode and point the remote control to the
camera lens. If you press any key on the remote
control and you notice the infra-red LED flicker
through the camera, the remote control is working.
The TV needs to be checked.
If you do not notice the flickering, the remote control
might be broken or its batteries are low.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
The TV goes back to standby after showing the
Philips startup screen
When the TV is in standby, a Philips startup screen is
displayed, then the TV returns to standby mode. This
is normal behavior. When the TV is disconnected and
reconnected to the power supply, the startup screen
is displayed at the next startup. To turn on the TV
from standby, press on the remote control or the TV.
The standby light keeps on blinking
Disconnect the power cable from the power outlet.
Wait 5 minutes before you reconnect the power
cable. If the blinking reoccurs, contact Philips TV
Consumer Care.
Channels
No digital channels found during the installation
Make sure that all cables are properly connected and
that the correct network is selected.
Previously installed channels are not in the channel
list
Make sure that the correct channel list is selected.
Picture
No picture / distorted picture
• Make sure that the antenna is properly connected to
the TV.
• Make sure that the correct device is selected as the
display source.
• Make sure that the external device or source is
properly connected.
Sound but no picture
• Make sure that the picture settings are set correctly.
Poor antenna reception
• Make sure that the antenna is properly connected to
the TV.
• Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality. If possible, try to improve
the reception quality by changing the antenna
direction or moving devices away from the TV.
• If reception on only one channel is poor, fine-tune
this channel with Manual Installation.
Poor picture from a device
• Make sure that the device is connected properly.
• Make sure that the picture settings are set correctly.
Picture settings change after a while
Make sure that Location is set to Home . You can
change and save settings in this mode.
A commercial banner appears
Make sure that Location is set to Home.
Picture does not fit the screen
Change to a different picture format.
Picture format keeps changing with different
channels
Select a non "Auto" picture format.
Picture position is incorrect
Picture signals from some devices may not fit the
screen correctly. Check the signal output of the
connected device.
Computer picture is not stable
Make sure that your PC uses the supported resolution
and refresh rate.
Sound
No sound or poor sound quality
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
• Make sure that the sound settings are correctly set.
• Make sure that all cables are properly connected.
• Make sure that the volume is not muted or set to
zero.
• Make sure that the TV audio output is connected to
the audio input on the Home Theater System.
Sound should be heard from the HTS speakers.
• Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
73
HDMI and USB
HDMI
• Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
• If the TV does not recognize the HDMI device and
no picture is displayed, switch the source from one
device to another and back again.
• If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
No volume icon shown
• When an HDMI-CEC audio device is connected and
you use the TV Remote Control to adjust the volume
level from the device, this behavior is normal.
Photos, movies, and music from a USB device do not
play
• Make sure that the USB storage device is set to Mass
Storage Class compliant, as described in the storage
device's documentation.
• Make sure that the USB storage device is compatible
with the TV.
• Make sure that the audio and picture file formats are
supported by the TV.
Choppy playback of USB files
• The transfer performance of the USB storage device
may limit the data transfer rate to the TV which
causes poor playback.
Wi-Fi and Internet
Wi-Fi network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
DHCP
• If the connection fails, you can check the DHCP
(Dynamic Host Configuration Protocol) setting of the
router. DHCP should be switched on.
Wrong menu language
Wrong menu language
Change the language back to your language.
To change the language of the TV menus and
messages…
1 - Press , select General
settings > Language > Menu Language and
press OK.
2 - Select the language you want and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
23.4
Online help
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support .
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
23.5
Consumer care/Repair
For support and repair, call the Consumer Care
hotline in your country. Find the telephone number in
the printed documentation that came with the TV.
Or consult our website www.philips.com/support .
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
Warning
Do not attempt to repair the TV yourself. This may
cause severe injury, irreparable damage to your TV,
or void your warranty.
74
24
Safety and care
24.1
Safety
Important
Read and understand all safety instructions before
you use the TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Risk of electric shock or fire
• Never expose the TV to rain or water. Never place
liquid containers, such as vases, near the TV.
If liquids are spilled on or into the TV, disconnect the
TV from the power outlet immediately.
Contact Philips TV Consumer Care to have the TV
checked before use.
• Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning
candles, naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation slots or other
openings on the TV.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
exerted on the power cord when you swivel the TV
screen.
• To disconnect the TV from the main power, the
power plug of the TV must be disconnected. When
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
Risk of injury or damage to the TV
• Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
• When wall mounted, ensure that the wall mount can
safely bear the weight of the TV set. TP Vision bears
no responsibility for improper wall mounting that
results in accident, injury or damage.
• Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Risk of damage to the TV!
Before you connect the TV to the power outlet,
ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
to the power outlet if the voltage is different.
Risk of injury to children
Follow these precautions to prevent the TV from
toppling over and causing injury to children:
• Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of
the mounting surface.
• Never place the TV on tall furniture, such as a
bookcase, without anchoring both the furniture and
TV to the wall or a suitable support.
• Teach children about the dangers of climbing on
furniture to reach the TV.
Risk of swallowing batteries!
The remote control may contain batteries which can
easily be swallowed by small children. Keep these
batteries out of reach of children at all times.
Risk of overheating
Never install the TV in a confined space. Always leave
a space of at least 10 cm or 4 inches around the TV
for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
Lightning storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or
41°F, unpack the TV and wait until the TV temperature
reaches room temperature before connecting the TV
to the power outlet.
75
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
24.2
Screen care
• Never touch, push, rub or strike the screen with any
object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals, or household cleaners on the TV.
• To avoid deformations and color fading, wipe off
water drops as quickly as possible.
• Avoid stationary images as much as possible.
Stationary images are images that remain on screen
for extended periods of time. Stationary images
include on screen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
76
25
Terms of use,
copyrights and
licenses
25.1
Terms of use
2017 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter
referred to as TP Vision, which is the manufacturer of
the product. TP Vision is the warrantor in relation to
the TV with which this booklet was packaged. Philips
and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V
or their respective owners. TP Vision reserves the right
to change products at any time without being obliged
to adjust earlier supplies accordingly.
The written material packaged with the TV and the
manual stored in the memory of the TV or
downloaded from the Philips website are believed to
be adequate for the intended use of the system.
The material in this manual is believed adequate for
the intended use of the system. If the product, or its
individual modules or procedures, are used for
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision Europe B.V. warrants that the
material itself does not infringe any United States
patents. No further warranty is expressed or implied.
TP Vision Europe B.V. cannot be held responsible
neither for any errors in the content of this document
nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted
and published on the Philips support website as soon
as possible. Terms of warranty, Risk of injury, damage
to TV or voiding of warranty! Never attempt to repair
the TV yourself. Use the TV and accessories only as
intended by the manufacturer. The caution sign
printed on the back of the TV indicates risk of electric
shock. Never remove the TV cover. Always contact
Philips TV Customer Care for service or repairs. Any
operation expressly prohibited in this manual, or any
adjustments and assembly procedures not
recommended or authorized in this manual, will void
the warranty. Pixel characteristics. This LCD/LED
product has a high number of color pixels. Although it
has effective pixels of 99.999% or more, black dots or
bright points of light (red, green, or blue) may appear
constantly on the screen. This is a structural property
of the display (within common industry standards)
and is not a malfunction. One of Philips’ leading
Business Principles is to take all necessary health and
safety measures for our products, to comply with all
applicable legal requirements and to stay well within
the applicable at the time of producing the products.
Philips is committed to developing, producing and
marketing products that cause no adverse health
effects. TP Vision confirms that, as long as its
products are handled properly for their intended use,
they are safe to use according to scientific evidence
available today. Philips plays an active role in the
development of safety standards, enabling Philips to
anticipate further developments in standardization for
early integration in its products.
77
26
Copyrights
26.1
Dolby
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
26.2
MHL
MHL, Mobile High-Definition Link and the MHL Logo
are trademarks or registered trademarks of the MHL,
LLC.
26.3
HDMI
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
26.4
DTS 2.0 + Digital Out ™
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
26.5
Microsoft
Windows Media
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
Microsoft PlayReady
Content owners use Microsoft PlayReady™ content
access technology to protect their intellectual
property, including copyrighted content.
This device uses PlayReady technology to access
PlayReady-protected content and/or WMDRM-
protected content. If the device fails to properly
enforce restrictions on content usage, content owners
may require Microsoft to revoke the device's ability to
consume PlayReady-protected content. Revocation
should not affect unprotected content or content
protected by other content access technologies.
Content owners may require you to upgrade
PlayReady to access their content. If you decline an
upgrade, you will not be able to access content that
requires the upgrade.
26.6
Wi-Fi Alliance
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance.
26.7
Kensington
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with issued
registrations and pending applications in other
countries throughout the world.
78
26.8
Other trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
79
27
Disclaimer regarding
services and/or
software offered by
third parties
Services and/or software offered by third parties may
be changed, suspended, or terminated without prior
notice. TP Vision does not bear any responsibility in
these sorts of situations.
80
Index
A
Age Ratings 23
Antenna 5
App gallery 40
Audio Commentary 52
Audio Description 52
Audio Out Format 48
Audio Out Leveling 48
Audio out, tips 11
Auto Volume Leveling 47
B
Backlight Contrast 44
Bass 47
Blu-ray Disc player, connect 13
C
Camcorder, connect 16
Channel 22
Channel List Copy, copy 55
Channel List Copy, current version 56
Channel List Copy, upload 56
Channel List, filter 22
Channel List, open 22
Channel List, search 22
Channel logos 51
Channel, age ratings 23
Channel, Antenna installation 55
Channel, Cable Installation 55
Channel, Channel List 22
Channel, Channel List, about 22
Channel, Manual channel update 55
Channel, Options 24
Channel, Radio stations 22
Channel, Reinstall 55
Channel, switch to a channel 23
Channel, TV guide 26
Child lock 23
Clear Internet Memory 8
Clear Miracast connection 8
Clear Sound 48
Clock settings 52
C
closed caption 25
C
Color 44
Color, Color enhancement 44
Color, color temperature 45
Color, custom color temperature 45
Color, Tint 44
Computer, connect 17
Consumer Care 74
Contact Philips 74
Contrast 44
Contrast, Contrast Mode 45
Contrast, Dynamic Contrast 45
Contrast, Gamma 45
Contrast, Video Contrast 45
D
DMR, Digital Media Renderer 7
DTVi applications 24
E
Eco settings 49
Environmental, Eco settings 69
G
Game Console, connect 13
Game or Computer 33
Game or Computer setting 44
Gamma 45
H
HDMI 3 - ARC 48
HDMI, DVI connection 10
Headphone Volume 49
Headphones, connect 13
Help 72
Help, check the TV 72
Home Menu 30
I
Incredible Surround 47
K
Keys on TV 18
L
Language settings 52
M
Media 35
Media files, from a computer or NAS 35
Media files, from a USB drive 35
Menu language 25
Miracast™ 8
Miracast™, switch on 37
MPEG Artifact Reduction 46
N
Netflix 32
Network installation 6
Network, Clear Wi-Fi Miracast connection 8
Network, connect 6
Network, problem 6
Network, settings 7
Network, static IP 7
Network, Switch on Wi-Fi 8
Network, TV Network Name 8
Network, view settings 7
Network, wired 7
Network, wireless 6
Network, WoWLAN 7
Network, WPS 6
Network, WPS with PIN code 6
Noise Reduction 46
O
On a TV stand, TV Placement 49
On screen Help 72
On the wall, TV Placement 49
Open source software 57
Options on a Channel 24
81
P
Pause TV 29
Photo camera, connect 16
Photos, movies and music 35
Picture Format 46
Picture Format, advanced 46
Picture Format, basic 46
Picture Style 43
Picture, Backlight Contrast 44
Picture, Color 44
Picture, Sharpness 44
Pixel Plus link 50
Placement, TV placement 5
Placement, viewing distance 5
Power connection 5
Power consumption, check 69
Problems 72
Problems, Channels 73
Problems, Connection, Internet 74
Problems, Connection, Wi-Fi 74
Problems, Menu language 74
Problems, Picture 73
Problems, Remote control 72
Problems, Sound 73
R
Record a program 28
Recording 28
Recording, schedule a recording 28
Recording, TV Guide data 26
Register your product 72
Reinstall TV 55
Remote control, keyboard 20
Remote control, qwerty 20
Remote control, uppercase 20
Rental videos 40
Repair 74
S
Safety instructions 75
Screen care 76
Screen off 69
Sharpness 44
Sharpness, MPEG Artifact Reduction 46
Sharpness, Noise reduction 46
Sharpness, Super Resolution 46
Sleep Timer 18
Smart TV 38
Software, Update 57
Sound Style 47
Sound, Auto Volume Leveling 47
Sound, Bass 47
Sound, Clear Sound 48
Sound, Headphone Volume 49
Sound, surround mode 47
Sound, Treble 47
Sources 33
Support, online 74
Surround Mode 47
Switch off timer 49
T
Treble 47
Turning on 18
TV guide 26
TV Guide, data and information 26
TV Guide, Reminder 27
TV Installation 55
U
Universal Access 52
Universal Access, Speakers/Headphones 53
USB Hard Drive, disk space 14
USB Hard Drive, Installation 14
USB Keyboard 15
USB Keyboard, connect 15
Utilities 31
W
Watch TV 23
Wi-Fi 6
Wired network 7
Wireless network 6
WoWLAN 7
Y
YPbPr connection, tips 10
82
