Philips AD315/12 User Manual
Displayed below is the user manual for AD315/12 by Philips which is a product in the Docking Speakers category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
Always there to help you
AD315/12
User manual
Question?
Contact
Philips
2EN
Contents
1 Safety and Notice 3
Safety 3
Notice 3
2 Your Docking Speaker 5
Introduction 5
What's in the box 5
Overview of the main unit 5
3 Get started 6
Connect power 6
Turn on 7
4 Play 7
Play from iPod/iPhone 7
Play from an external device 8
Adjust volume 8
5 Specications 9
Amplier 9
General information 9
6 Troubleshooting 9
3EN
1 Safety and
Notice
Read and understand all instructions before you
use this product. If damage is caused by failure
to follow the instructions, the warranty does
not apply.
Safety
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never look into the laser beam inside this apparatus.
•Never place this apparatus on other electrical
equipment.
•Keep this apparatus away from direct sunlight, naked
amesorheat.
•Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
• The device shall not exposed to dripping
or splashing.
• Do no place any source of danger on the
device(e.g.liquidlledobjects.litcandles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Make sure that there is enough free space
around the product for ventilation.
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Only use power supplies listed in the user
manual.
Notice
This product complies with the radio
interference requirements of the European
Community.
Anychangesormodicationsmadetothis
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
4EN
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separateintothreematerials:cardboard(box),
polystyrenefoam(buffer)andpolyethylene
(bags,protectivefoamsheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copy-
protected material, including computer
programs,les,broadcastsandsound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designedtoconnectspecicallytoiPodor
iPhonerespectively,andhasbeencertiedby
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Class II equipment symbol
This symbol indicates that the apparatus has a
double insulation system.
Note
•The type plate is located on the bottom of the
apparatus.
5EN
2 Your Docking
Speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking speaker, you can enjoy audio
from the iPod/iPhone and other audio devices.
What's in the box
Check and identify the contents of your
package:
• Main unit
• 1 x AC adaptor
• Short user manual
• Safety sheet
Overview of the main unit
a iPod/iPhone dock
b
• Turn on/off the unit.
c Battery compartment
d DC IN
• Power supply socket.
e AUDIO IN
• Connect an external audio device.
f VOLUME
• Adjust volume.
g
• Play/pause.
a
b
c
d
e
f
g
6EN
3 Get started
Caution
•Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
This docking speaker can be powered by either
AC power or batteries.
Option 1: AC power
Caution
•Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall socket.
Option 2: Battery power
Caution
•Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
•Remove batteries if they are exhausted or will not be
used for a long time.
•Batteries contain chemical substances, so they should
be disposed of properly.
Open the battery compartment.
1 Insert 4 x 1.5V AA batteries with correct
polarity(+/-)asindicated.
2 Close the battery compartment.
DC IN
4X1.5V UM3/LR6
7EN
Turn on
Press to turn the docking speaker on.
» The LED indicators light up.
Switch to standby mode
The docking speaker switches to standby mode
in the following situation:
• Press again;
• The speaker is idle for 15 minutes
when powered by AC supply.
» The LED indicators light off.
4 Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
• iPodtouch(5thgeneration)
• iPodnano(7thgeneration)
• iPhone 5
Listen to the iPod/iPhone
1 Press to turn the docking speaker on.
» The LED indicators light up.
2 Insert the iPod/iPhone into the dock.
3 Play audio on your iPod/iPhone.
» Audio comes out through this docking
speaker.
8EN
Charge the iPod/iPhone
Note
•If the docking speaker is operated on the batteries, you
cannot charge your iPod/iPhone.
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Play from an external device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
•Make sure that there is no audio detected from docking
connector in the speaker.
•If the audio source does not change to the external
device automatically , check the cable connection and
increase the output volume of the device to try again.
1 Press to turn the docking speaker on.
2 ConnecttheMP3linkcable(notsupplied)
to:
• the AUDIO-IN socket at the back of
the docking speaker.
• the headphone socket on an external
device.
3 Play audio on the device (see the device's
usermanual).
Adjust volume
To adjust volume:
• Press +/- on your docking speaker; or
• Adjust the volume control of your
iPod/iPhone or external device.
9EN
5 Specifications
Amplier
Rated Output Power 2 X 4 W RMS
General information
Power supply
- AC Power
- Battery
Model:
KSAS0151200150HE;
Input: 100-240 V ~,
50/60Hz, 0.4A;
Output: 5.9 V 2 A
4 x AA batteries
Operation Power Con-
sumption
<10.5 W
Standby Power Con-
sumption
<0.5 W
Max. load for iPod/
iPhone
5 V 1 A
Dimensions
- Main Unit (W x H
xD)
300 x 119 x 164 mm
Weight
- Main Unit
1.45 kg
6 Troubleshooting
Warning
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).Whenyoucontact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•Make sure that the docking speaker is fully
charged.
•Make sure that the AC power plug of the
unit is connected properly.
•Make sure that there is power at the AC
outlet.
No sound
•Adjust the volume.
No response from the unit
•Disconnect and reconnect the AC power
plug, then turn on the docking speaker
again.
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
AD315_12_UM_V1.0