Philips AD530/05 User Manual
Displayed below is the user manual for AD530/05 by Philips which is a product in the Docking Speakers category. This manual has pages.
Related Manuals
AD530
www.philips.com/welcome
User manual
Register your product and get support at
2EN
Contents
1 Important 3
2 Your Docking Speaker 4
Introduction 4
What's in the box 4
Overview of the main unit 5
3 Get started 6
Connect power 6
4 Play 6
Play from iPod/iPhone 6
Play from Bluetooth device 7
Play from an external audio device 7
Adjust volume 8
Mute sound 8
5 Product information 8
6 Troubleshooting 9
About Bluetooth device 9
7 Notice 10
Recycling 10
3EN
1 Important
Read these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
produce heat.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
by the manufacturer.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on the
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
Never remove the casing of this apparatus.
Never place this apparatus on other electrical
equipment.
Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
4EN
2 Your Docking
Speaker
Congratulations on your purchase, and
support that Philips offers, register your product
at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this docking speaker, you can enjoy audio
from the iPod/iPhone, Bluetooth devices, and
other external audio devices.
What's in the box
Check and identify the contents of your
package:
Main unit
AC power adaptor
Quick start guide
5EN
Overview of the main unit
a
Mute or unmute sound.
b Dock for the iPod/iPhone
c
Enable or disable Bluetooth function.
d /
Adjust volume.
e MP3-LINK
Connect an external audio device.
f DC IN
Connect power.
ad
c
b
fe
6EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Note
The type plate is located at the back of the main unit.
Connect the power adaptor to:
the DC IN socket at the back of the
docking speaker.
the wall outlet.
DC IN
4 Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
iPod touch (1st, 2nd, 3rd, and 4th
iPod classic
iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
Listen to the iPod/iPhone
1 Place an iPod/iPhone in the dock.
2 Play audio from the iPod/iPhone.
7EN
To remove the iPod/iPhone:
Pull the iPod/iPhone out of the dock.
Charge the iPod/iPhone
When the docking speaker is connected to
power, the docked iPod/iPhone begins to
charge automatically.
Play from Bluetooth device
Pair with Bluetooth deivces
Note
Before you connect a Bluetooth device to this docking
speaker, familiarize yourself with the Bluetooth
capabilities of the device.
The effective operation range between the docking
system and the paired device is approximately 10
Keep this docking speaker away from other electronic
devices that may cause interference.
1 Press to select Bluetooth source.
» The Bluetooth button blinks.
2 Turn on Bluetooth function on your device.
Different devices may have different
way to activate Bluetooth.
3 Scan Bluetooth devices that can pair with
your device.
4 When “AD530” is displayed on your
device, select it to start connection.
»
heard and the Bluetooth button stops
blinking if connection is successful.
» A different Bluetooth icon is displayed
on your device.
5 Play music in your device.
» Music comes through the docking
speaker.
Tip
If your Bluetooth device has been paired with AD530
To disconnect Bluetooth:
Press on the docking speaker again.
Deactivate Bluetooth function on
your device or move it beyond the
communication range.
Play from an external audio
device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
Make sure that no iPod/iPhone is docked in the docking
speaker.
8EN
1
to:
the MP3-LINK socket at the back of
the docking speaker.
the headphone socket on an external
device.
» The docking speaker switches to MP3
link mode automatically.
2 Play music on the device (see the device's
Adjust volume
During play, press / to adjust volume.
Mute sound
During play, press to mute or unmute sound.
5 Product
information
Note
Product information is subject to change without prior
notice.
Rated Output Power 4 W per channel x 2
Signal to Noise Ratio > 62 dBA
MP3 Link 650 mV RMS
Bluetooth
Standard Bluetooth Standard Version
2.1+EDR
Output power
Frequency band 2.402 ~ 2.480 GHzISM Band
Range
General information
AC Power Model: AS110-080-
Input: 100-240 V ~,
Output: 8 V 1.3 A
Operation Power
Consumption
15 W
Standby Power
Consumption
<0.5 W
Max. load for iPod/iPhone 5 V 1 A
Dimensions
- Main Unit
261 x 130 x 103 mm
Weight
- Main Unit
- With Packing
0.9 kg
1.5 kg
9EN
6 Troubleshooting
Warning
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power adaptor of the
unit is connected properly.
Ensure that there is power at the AC
outlet.
No sound
Adjust the volume.
No response from the unit
Disconnect and reconnect the AC power
adaptor, then turn on the unit again.
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
required for the system.
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
The system is not in the pairing mode.
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired device connects and disconnects
constantly.
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
10EN
7 Notice
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
mean that an electronic accessory has been
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
This product complies with the radio
interference requirements of the European
Community.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
AD530_05_UM_V1.0