Table of Contents
Philips AS360/05 User Manual
Displayed below is the user manual for AS360/05 by Philips which is a product in the Docking Speakers category. This manual has pages.
Related Manuals
www.philips.com/welcome
User manual
Always there to help you
Register your product and get support at
AS360
Question?
Contact
Philips
1EN
Contents
Contents
1 Important 2
Safety 2
Notice 2
2 Your Docking Speaker for Android™ 4
Introduction 4
What's in the box 4
Overview of the main unit 5
3 Get started 6
Power supply 6
Turn on 6
4 Play 7
Dock and play 7
Play audio through manual Bluetooth
connection 8
5 Other features 10
Play audio from an external device 10
Charge your Android-powered device 10
Charge non Android-powered device
through the USB socket 10
6 Product information 11
Specications 11
7 Troubleshooting 12
2EN
1 Important
Safety
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or
otherapparatus(includingampliers)that
produce heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Unplug this apparatus during lightning
storms or when unused for long periods
of time.
• Referallservicingtoqualiedservice
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
• Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbonandalkaline,etc.).
• Remove batteries when the unit is not
used for a long time.
• Batteries (battery pack or batteries
installed)shallnotbeexposedto
excessiveheatsuchassunshine,reor
the like.
• Apparatus shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
apparatus(e.g.liquidlledobjects,lighted
candles).
• Where the plug of the Direct Plugin
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Use only power supplies listed in the user
manual.
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical
equipment.
Notice
Anychangesormodicationsmadetothis
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
This product complies with the requirement of
the 1999/5/EC directive.
A copy of EC declaration of Conformity is
available in the Portable Document Format
(PDF)versionoftheusermanualatwww.
philips.com/support.
3EN
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separateintothreematerials:cardboard(box),
polystyrenefoam(buffer)andpolyethylene
(bags,protectivefoamsheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is
under license.
Note
•The type plate is located on the bottom of the
apparatus.
4EN
2 Your Docking
Speaker for
Android™
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking speaker, you can:
• enjoy audio from your Android-
powered device or an external device;
• charge your device.
What's in the box
Check and identify the contents of your
package:
• Main unit
• AC power adapter
• 3.5 mm audio in link cable
• Printing materials
•
5EN
Overview of the main unit
a
• Bluetooth indicator.
b
• Turn on/off the docking speaker, or
switch the docking speaker to standby
mode.
c Adjustment wheel
• Adjust to stabilize your docked device.
d AUDIO IN
• Connect an external audio device.
e CHARGING
• Charge your non Android-powered
device through USB cable.
f DC IN
• Power supply socket.
b
ag
h
f
e
c
d
g FlexiDock 2 (for Android-powered
device)
h - VOL +
• Adjust volume.
6EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Power supply
Either AC power or batteries can be used as
power supply of this docking speaker.
Option 1: AC power
Caution
•Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the docking speaker.
•Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adapter to the wall outlet.
Option 2: Battery power
Caution
•Risk of explosion! Keep batteries away from heat,
sunshine,orre.Neverdiscardbatteriesinre.
1 Open the battery compartment.
2 Insert 4 AA batteries with correct polarity
(+/-)asindicated.
3 Close the battery compartment.
Note
•Batteries contain chemical substances, so they should
be disposed of properly.
•Batteries are for backup purpose. You can not play a
docked device with the docking speaker in battery
mode.
•When playing from a docked device, and the docking
speaker is installed with batteries, if unplug the adapter,
play will stop and the docking speaker will switch to
standby mode. Press to restart the docking speaker,
and switch to Audio in/Bluetooth/USB mode.
Turn on
Press to turn on the docking speaker.
Switch to standby mode
Press again to switch the docking speaker to
standby mode.
7EN
4 Play
With this docking speaker, you can enjoy audio
from your devices.
Dock and play
Compatible with Android™
To make full use of your docking speaker, your
Android-powered device should satisfy the
following requirements:
• With Android operation system
(version4.2andabove);
• With a micro USB connector.
For other devices with micro USB connector
and Bluetooth function, you can still use the
docking speaker to do the following:
• Charge your Android-powered device
through the dock;
• Charge your device through the
CHARGING socket;
• Enjoy audio through Bluetooth.
Dock your Android-powered device
To play and charge your Android-powered
device, you need to dock it in the docking
speakerrst.
1 Check the orientation of the micro USB
connector on your Android-powered
device. If your USB connector has a cover,
ipitoutwards.
2 If necessary, rotate the USB connector on
the docking speaker, and then place your
Android-powered device onto the dock.
3 Adjust the wheel on the back of the
connector to stabilize the device.
8EN
4 Slide the connector to place your device in
the middle of the docking speaker.
Tip
•If the micro USB connector is located at the top, screen
auto-rotation is available.
Listen to your Android-powered
device
After placing your Android-powered device
into the dock, you can enjoy music through the
docking speaker.
1 Press to turn on the docking speaker.
2 Play from your Android-powered device.
» You can now enjoy music through the
docking speaker.
Tip
•Press - VOL + to adjust volume.
•You can not play a docked device with the docking
speaker in battery mode.
Play audio through manual
Bluetooth connection
The docking speaker uses Bluetooth wireless
technology to stream music from your portable
device to the system.
Note
•Your Bluetooth device should be with Bluetooth
software of version 2.1 or above.
•Before you connect a Bluetooth device to this docking
speaker, familiarize yourself with the Bluetooth
capabilities of the device.
•Keep this docking speaker away from other electronic
devices that may cause interference.
1 On your docking speaker, press to
activate Bluetooth.
» The Bluetooth indicator blinks.
2 Turn on Bluetooth function of your
Bluetooth device.
• Different devices may have different
way to activate Bluetooth.
3 Scan Bluetooth devices that can pair with
your device.
9EN
4 When [PHILIPS AS360] (Philips AS360) is
displayed on your device, select it to start
connection.
» If connection is successful, you will hear
doublebeepconrmation.
5 Play audio with the media player of your
device.
» The audio comes out through the
docking speaker.
Tip
•The effective operation range between the docking
speaker and the paired device is approximately 10
meters(30feet).
•Any obstacle between the speaker and the device can
reduce the operational range.
10 EN
5 Other features
Play audio from an external
device
You can listen to audio from an external device
through this docking speaker.
1 Connect the 3.5mm audio in cable
(supplied)to:
• the AUDIO IN socket.
• the headphone socket of an external
device.
2 Play audio on the external device (see the
device'susermanual).
Charge your Android-
powered device
When the docking speaker is connected to
power, the docked device starts charging
automatically.
Tip
•This function is available for all Android-powered
devices that have a micro USB connector.
•Charging is not available in battery mode.
Charge non Android-
powered device through the
USB socket
ConnectaUSBcable(notsupplied)to:
• the CHARGING socket at the back of
the docking speaker.
• the micro USB socket on your device.
Note
•It is not guaranteed that all USB cables work with this
docking speaker.
•Charging is not available in battery mode.
11EN
6 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
AC Power OH-1028A0903000U-UK
(Philips)
Input: 100-240V~, 50/60Hz,
800mA MAX;
Output: 9V 3A
Battery 4 x AA
Operation Power Con-
sumption
< 18W
Eco Standby Power Con-
sumption
< 0.5W
Dimensions - Main Unit
(WxHxD)
260 X 90 X 95 mm
Weight - Main Unit 1.18 kg
Charging:
- through micro USB con-
nector
- through CHARGING
socket
1A
1A
Speaker impedance 4 ohm
12 EN
7 Troubleshooting
Warning
•Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support).WhenyoucontactPhilips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•Make sure that the AC power adaptor of
the docking speaker is connected properly.
•Make sure that there is power at the AC
outlet.
•Make sure that the batteries are inserted
correctly.
•If the docking speaker is installed with
batteries, and the AC power adapter is
connected to the docking speaker, when
unplug the adapter, the docking speaker
will switch to standby mode. Press to
restart the docking speaker.
No response from docked device
•The "dock and play" function only supports
Android-powered devices with an
operation system of version 4.2 or above.
•The "dock and play" function is not
available in battery mode.
No sound or poor sound
• Adjust the volume of the docking speaker.
• Adjust the volume of your Android device.
No response from the unit
•Disconnect and reconnect the AC power
plug, then turn on the docking speaker
again.
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
AS360_05_EN_UM_V1.0