Table of Contents
Philips BT6600R/93 User Manual
Displayed below is the user manual for BT6600R/93 by Philips which is a product in the Portable Speakers category. This manual has pages.
Related Manuals
BT6600
Register your product and get support at
www.philips.com/support
User manual
1EN
Contents
1 Important 1
2 Your Bluetooth speaker 2
Introduction 2
What's in the box 2
Overview of the speaker 3
3 Get started 4
Power supply 4
Turn on/o 5
4 Use Bluetooth devices 6
Connect a device 6
Connect three Bluetooth
devices simultaneously 7
Play from Bluetooth device 7
Control your phone call 7
Clear pairing information 7
5 Other features 8
Listen to an external device 8
Charge your device 8
Adjust volume 8
6 Spec ications 9
7 Tro ubleshooting 10
General 10
About Bluetooth device 10
8 Notice 11
Care of the environment 11
Trademark notice 11
1EN
1 Important
Warning
•Never remove the casing of this speaker.
•Never place this speaker on other electrical
equipment.
•Keep this speaker away from direct
sunlight, naked ames or heat.
•Make sure that you always have easy
access to the power cord, plug, or adaptor
to disconnect the speaker from the power.
• Make sure that there is enough
free space around the speaker for
ventilation.
• After use under humid
circumstance, immediately clean
the product with a soft dry cloth.
• The battery shall not be exposed
to excessive heat such as sunshine,
re or the like.
• The adapter shall not be exposed
to dripping or splashing.
• No objects lled with liquids shall
be placed on the adapter.
• Use only power supplies listed in
the user manual.
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect
device, the disconnect device shall
remain readily operable.
Note
• The type plate is located on the bottom of
the apparatus.
2EN
2 Your
Bluetooth
speaker
Congratulations on your purchase, and
welcome to Philips! To fully benet from
the support that Philips oers, register
your product at www.philips.com/
welcome.
Introduction
This speaker has passed splash-proof
test (IPX4) and can be used near water.
With this speaker, you can enjoy audio
from Bluetooth-enabled devices or
other external devices.
What's in the box
Check and identify the contents of your
package:
• Speaker
• USB adapter head
• USB cable for charging (X 2)
• Charging base
• Printed materials
Quick Start Guide
X2
3EN
Overview of the speaker
a /MULTIPAIR
• Enter Bluetooth pairing mode.
• Disconnect Bluetooth
connection.
• Clear Bluetooth pairing
information.
• Answer or reject an incoming
call.
• End the current phone call.
• Transfer the call to your mobile
device.
b NFC
• Connect a NFC compatible
device through Bluetooth.
c LED indicator
• Indicate battery or Bluetooth
connection status.
d Volume knob ( )
• Turn the speaker on or o.
• Adjust volume.
c
d
e
e
f
g
a
b
e DC IN
• Charge the built-in battery.
f AUDIO IN
• Connect an external audio
device.
g CHARGING (5 V 2.1 A)
• Charge your mobile device.
4EN
3 Get started
Always follow the instructions in this
chapter in sequence.
Power supply
Either AC power or battery can be used
as power supply of this product.
Option 1: Battery power
The speaker can operate on the built-in
rechargeable battery.
Note
•Rechargeable battery has a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•It takes approximately four hours to fully
charge the battery.
•The LED indicator ashes red when the
battery is low.
To recharge the built-in battery:
• Dock the speaker into the charging
base, then connect the speaker to
AC power by using the supplied
adaptor; or
• Connect the speaker to AC power
by using the supplied adaptor
directly.
Battery status LED indicator
Under charging Solid red （in
power-o mode）;
Flashing red for
three seconds,
then turn blue (in
power-on mode)
Fully charged O （in power-o
mode）
Option 2: AC power
Caution
•Risk of product damage! Make sure that the
power voltage corresponds to the voltage
printed on the back or underside of the
speaker.
•Risk of electric shock! When you unplug the
AC adapter, always pull the plug from the
socket. Never pull the cord.
Connect the adapter to:
• the DC IN socket on the speaker or
on the charging base;
• the power outlet.
5EN
Turn on/o
To turn the speaker on or o, rotate the
knob clockwise or anticlockwise until
you hear a click.
» When the speaker is turned on, the
blue LED indicator ashes.
» When the speaker is turned o, the
blue LED indicator lights o.
OFF
ON
Note
•If the battery is low, the red LED indicator
ashes.
Switch to standby mode
When there is no operation and
audio ouput for 15 minutes, the
speaker switches to standby mode
automatically.
Note
•To wake up the speaker from standby
mode, press or tap the NFC tag on the
top of the speaker with your Bluetooth
device.
6EN
4 Use
Bluetooth
devices
With this speaker, you can listen to
audio from Bluetooth-enabled devices
and control the incoming call through
Bluetooth.
Connect a device
Note
•Make sure that Bluetooth function is
enabled on your device, and your device is
set as visible to all other Bluetooth devices.
•Any obstacle between this speaker
and a Bluetooth device can reduce the
operational range.
•Keep away from any other electronic
device that may cause interference.
•The operational range between this
speaker and a Bluetooth device is
approximately 10 meters (30 feet).
Option 1: Connect a device
through NFC
Near Field Communication (NFC) is a
technology that enables short-range
wireless communication between
various NFC compatible devices, such
as mobile phones and IC tags.
If your Bluetooth device supports NFC,
you can connect it with this speaker
easily.
1 Enable NFC on your Bluetooth
device (refer to its user manual).
2 Turn on the speaker.
» The blue LED indicator ashes.
3 Tap the NFC tag on the top of the
speaker with the NFC area of your
Bluetooth device.
4 Follow the on-screen instructions
to complete the pairing and
connection.
» After successful connection, the
speaker beeps twice, and the
LED indicator turns solid blue.
Option 2: Connect a device
manually
1 On your Bluetooth device, enable
Bluetooth and search for Bluetooth
devices that can be paired (see the
user manual of the device).
2 Turn on the speaker.
» The blue LED indicator ashes.
3 Select [Philips BT6600] displayed
on your device for pairing. If
necessary, input “0000” as the
pairing password.
» After successful connection, the
speaker beeps twice, and the
LED indicator turns solid blue.
Tip
•If the speaker is playing audio from a
connected Bluetooth device, it will not
beep after connected to another device.
7EN
LED indicator Description
Flashing blue
quickly
Ready for pairing
Flashing blue slowly Connecting
Solid blue Connected
Connect three Bluetooth
devices simultaneously
The speaker can connect to three
Bluetooth devices at the same time.
• If the speaker is connected to one
device, repeat the above steps to
connect to the second and third
device (see the above section
“Connect a device”).
• If the speaker is connected to three
devices, press and hold for two
seconds.
» The speaker disconnects the
earliest device which is not
playing music, and gets ready to
pair with another device.
2 sec.
Play from Bluetooth
device
Note
•If there is an incoming call on the
connected mobile phone, music play
pauses.
• After successful Bluetooth
connection, play audio on the
Bluetooth device.
» Audio streams from your
Bluetooth device to the speaker.
• If more than one device is
connected with the speaker, play
audio from any connected devices,
and the music playback through the
other device is paused.
Control your phone call
After Bluetooth connection, you can
control an incoming call with this
speaker.
Button Function
Press to answer an incoming
call.
Press and hold for two
seconds to reject an
incoming call.
During a call, press to end
the current call.
During a call, press and hold
for two seconds to transfer
the call to your mobile device.
Clear pairing information
Press and hold for 7 seconds to clear
Bluetooth pairing information.
8EN
5 Other
features
Listen to an external
device
With this speaker, you can also listen
to an external audio device such as an
MP3 player.
Note
•Make sure that music playback through
Bluetooth is stopped.
1 Open the protective cover on the
bottom of the speaker.
2 Connect an audio input cable (not
supplied) with a 3.5 mm connector
on both ends to
• the AUDIO IN socket on this
speaker, and
• the headphone socket on the
external device.
3 Play audio on the external device
(refer to its user manual).
Tip
•When you start music streaming from
a connected Bluetooth device, the
speaker switches to the Bluetooth source
automatically.
Charge your device
With this speaker, you can charge your
external devices, such as your cell
phone, MP3 player or other mobile
devices.
1 Connect the speaker to your mobile
device with the USB cable.
2 Turn on the speaker.
» Once the device is recognized,
the charging starts.
Adjust volume
During play, rotate the knob to increase
or decrease volume.
9EN
6 Spec-
ifications
Note
•Product information is subject to change
without prior notice.
Rated output
power
(Amplier)
2 x 7.5W RMS
≤1% THD
Acoustic
frequency
response
63-20kHz,+/-3dB
Speaker driver 2 x 1.75” full range,
4 Ω
Bass
enhancement
2 x passive radiator
Bluetooth
version
V3.0
Bluetooth
supported
proles
HFP V1.6, A2DP V1.2,
AVRCP V1.4
Bluetooth
frequency band
/ Output power
2.402GHz ~
2.480GHz ISM Band
/ ≤ 4dBm (Class 2)
Bluetooth range 10 m (Free space)
AUX input level 650mV RMS
IPX standard 4
Power Supply
- AC Power
(power adapter)
Brand name:
PHILIPS;
Model:GME10D-
050200FCu;
Input:100-240V~,
50-60Hz,0.28A;
Output: 5 V 2 A;
- Built-in
Battery
Li-ion battery
(3.7 V, 6000 mAh)
Play time in
battery mode
Approx. 12 hours
Charging time 4 hours (with 2A
rated power source)
USB charging 5V 2.1A / Type-A
socket
Power bank
output rating
5V / Max. 2.1A
Dimensions
- Main Unit
(W x H x D) 81 x 214 x 76 mm
Weight
- Main Unit 0.7 kg
10EN
7 Tro-
ubleshooting
Warning
•Never remove the casing of this device.
To keep the warranty valid, never try to
repair the system yourself.
If you encounter problems when using
this device, check the following points
before requesting service. If the problem
remains unsolved, go to the Philips Web
page (www.philips.com/support). When
you contact Philips, make sure that the
device is nearby and the model number
and serial number are available.
General
No power
•Make sure that the AC power plug
of the unit is connected properly.
•Make sure that there is power at the
AC outlet.
•Recharge your speaker.
No sound
•Adjust volume on this product.
•Adjust volume on the connected
device.
•Make sure that your Bluetooth
device is within the eective
operational range.
No response from the speaker
•Disconnect and reconnect the
power plug, then turn on the
speaker again.
•Recharge the speaker.
The LED indicator ashes red, and
the speaker has no repsonse when
pressing any key.
•The speaker is in demo mode. Press
and hold for 15 seconds to exit
this mode.
About Bluetooth device
The audio quality is poor after
connection with a Bluetooth-enabled
device.
•The Bluetooth reception is poor.
Move the device closer to this
product or remove any obstacle
between them.
Fail to nd [Philips BT6600] on your
device for pairing.
•Press and hold for two seconds
to enter pairing mode, and then try
again.
Cannot connect with the device.
•The Bluetooth function of the
device is not enabled. Refer to the
user manual of the device for how
to enable the function.
•This product is already connected
with three Bluetooth devices. Press
and hold for two seconds, and
then try again.
The paired device connects and
disconnects constantly.
•The Bluetooth reception is poor.
Move the device closer to this
product or remove any obstacle
between them.
•For some devices, Bluetooth
connection may be deactivated
automatically as a power-saving
feature. This does not indicate any
malfunction of this product.
11 EN
8 Notice
Any changes or modications made
to this device that are not expressly
approved by Gibson Innovations may
void the user’s authority to operate the
equipment.
Care of the environment
Disposal of your old product
Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused.
Do not throw away the product with
the normal household waste at the
end of its life, but hand it in at an
ocial collection point or recycling. By
doing this, you help to preserve the
environment.
Caution
•Removal of the built-in battery invalidates
the warranty and may destroy the product.
Always bring your product to a
professional to remove the built-in
battery.
Environmental information
All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
materials: cardboard (box), polystyrene
foam (buer) and polyethylene (bags,
protective foam sheet.)
Your system consists of materials
which can be recycled and reused
if disassembled by a specialized
company. Please observe the local
regulations regarding the disposal
of packaging materials, exhausted
batteries and old equipment.
Trademark notice
The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Gibson Innovations Limited
is under license. Other trademarks
and trade names are those of their
respective owners.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the
United States and in other countries.
This is CLASS II apparatus with double
insulation, and no protective earth
provided.
12
2016 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under the responsibility of WOOX Innovations
(Shanghai) Commercial Company Ltd., and WOOX Innovations (Shanghai) Commercial Company Ltd., is the
warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used
under license.
BT6600_93_UM_V1.0