Table of Contents
Philips BT7500B/12 User Manual
Displayed below is the user manual for BT7500B/12 by Philips which is a product in the Portable Speakers category. This manual has pages.
Related Manuals
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
BT7500B
Question?
Contact
Philips
1EN
Contents
1 Important 2
2 Notice 3
Compliance 3
Care of the environment 3
Trademark notice 3
3 Your Bluetooth speaker 4
Introduction 4
What's in the box 4
Overview of the speaker 5
4 Get started 6
Connect power 6
Turn on 6
LED indicator status 6
5 Use Bluetooth devices 7
Connect a device 7
Play from Bluetooth device 8
Enter Bluetooth pairing mode 8
Disconnect the Bluetooth-enabled device 8
Connect a fourth Bluetooth device 8
6 Other features 9
Listen to an external device 9
Charge your mobile devices 9
Adjust volume 9
7 Product information 10
Specications 10
8 Troubleshooting 11
General 11
About Bluetooth device 11
2EN
1 Important
Warning
•Never remove the casing of this speaker.
•Never lubricate any part of this speaker.
•Never place this speaker on other electrical equipment.
•Keep this speaker away from direct sunlight, naked
amesorheat.
•Make sure that you always have easy access to the
power cord, plug, or adaptor to disconnect the speaker
from the power.
• Make sure that there is enough free space
around the speaker for ventilation.
• Use only power supplies listed in the user
manual.
• The speaker shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
thespeaker(e.g.liquidlledobjects,lighted
candles).
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Note
•The type plate is located on the bottom of the product.
3EN
2 Notice
Anychangesormodicationsmadetothis
device that are not expressly approved by
Gibson Innovations may void the user’s
authority to operate the equipment.
Compliance
Hereby, Gibson Innovations declares that this
product is in compliance with the essential
requirements and other relevant provisions
ofDirective1999/5/EC.Youcanndthe
Declaration of Conformity on www.philips.com/
support.
Care of the environment
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU. Inform yourself about the local
separate collection system for electrical and
electronic products. Follow local rules and never
dispose of the product with normal household
waste. Correct disposal of old products
helps prevent negative consequences for the
environment and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Trademark notice
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Gibson
is under license. Other trademarks and trade
names are those of their respective owners.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
4EN
3 Your Bluetooth
speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this speaker, you can
• enjoy audio from your Bluetooth-enabled
devices or other external audio devices;
and
• charge mobile devices through the USB
socket.
What's in the box
Check and identify the contents of your
package:
• Main unit
• AC/DC adaptor
• Power cord
• Short user manual
• Safetyandnoticeleaet
5EN
Overview of the speaker
a
• Turn the speaker on.
• Switch to standby mode.
b Volume knob
• Adjust volume.
c PAIRING
• Enter Bluetooth pairing mode.
d NFC
• Connect a device with NFC feature
through Bluetooth.
e LED indicator
f AUDIO IN
• Connect an external audio device.
g CHARGING
• Charge mobile devices in AC mode.
h DC IN
• Connect power.
abcd
ef
gh
6EN
4 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
•Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adaptor to:
• the DC IN socket on the speaker.
• the wall outlet.
Turn on
Press .
» The speaker switches to Bluetooth
mode.
» TheLEDindicatorashesblue.
Switch to standby mode
The speaker switches to standby mode in the
following situations:
• In power on mode, press .
• No audio is played or no key is pressed for
15 minutes.
Wake up from standby mode
• In standby mode, press or PAIRING.
• Tap the NFC tag with your mobile phone.
LED indicator status
Mode LED status
Standby
mode
Solid red.
Bluetooth
mode
Flashing blue while connecting, or
waiting for pairing; Solid blue after
connected.
Flash blue shortly when the
volume reaches the maximum/
minimum.
Audio-in
mode
Solid green.
Flashing green shortly when the
volume reaches the maximum/
minimum.
7EN
5 Use Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices.
Connect a device
Note
•Make sure that your Bluetooth device is compatible
with this speaker.
•Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
•The speaker can memorize a maximum of 8 paired
devices.
•Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•Keep away from any other electronic device that may
cause interference.
Option 1: Connect a device through
NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1 On your device, enable NFC and
Bluetooth functions (refer to the user
manual of the device).
2 Tap the NFC tag on the top of the speaker
with the back of your Bluetooth device.
» TheLEDindicatorashesblue.
3 Follow the on-screen instructions to
complete the pairing and connection.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
Option 2: Connect a device manually
Note
•The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
•The speaker switches to Bluetooth pairing mode
automatically every time when you turn on the speaker.
1 Press PAIRING for two seconds to enter
Bluetooth pairing mode..
» TheLEDindicatorashesblue.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (see the user manual of
the device).
3 Select [Philips BT7500] on your device to
start pairing and connection. If necessary,
input default password “0000”.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
NFC
8EN
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
Note
•The speaker synchronizes its volume with the
connected Bluetooth devices which support volume
sync function.
•Bluetooth devices with iOS or Android 4.4 or higher
support sync function.
Enter Bluetooth pairing mode
Press and hold PAIRING for two seconds when
the speaker is in standby mode or AUDIO IN
mode.
Philips BT7500
2s
Disconnect the Bluetooth-
enabled device
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» TheLEDindicatorashes.
To clear the Bluetooth pairing history:
Press and hold PAIRING for more than 7
seconds.
Connect a fourth Bluetooth
device
The product can connect a maximum of 3
Bluetooth devices simultaneously. If you try to
connect a fourth device with this product, you
may need to press and hold PAIRING for 2s,
then an idle device that is connected earlier will
be disconnected to enable 4th device to pair
and connect.
9EN
6 Other features
Listen to an external device
With this speaker, you can also listen to an
external audio device such as an MP3 player.
Note
•When an external audio device is connected, the
speaker switches to audio-in mode only when no
Bluetooth connection or music playback through
Bluetooth is paused.
1 Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to:
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
2 Play audio on the external device (refer to
its user manual).
Note
•The LED indicator turns to solid green when the
speaker is in AUDIO IN mode.
AUDIO IN
Charge your mobile devices
You can charge your mobile devices through
the CHARGING socket.
Note
•The USB socket is for charging only.
• Connect the speaker to your mobile
device with a USB cable (not supplied).
» Once the device is recognized, the
charging starts.
Adjust volume
Rotate the volume knob on the top of the
speaker to increase or decrease the volume.
• When the volume reaches the maximum
or minimum, the LED indicator shortly
ashblue(Bluetoothmode)orgreen
(AUDIO IN mode).
10 EN
7 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 2 X 15W
Frequency Response 63 - 20 KHz,
+/- 3 dB
Signal to Noise Ratio > 72 dBA
Total Harmonic
Distortion
< 1%
Audio Input 650 mV RMS
Bluetooth
Bluetooth Version V3.0
SupportedProles A2DP, AVRCP
Range 10 m (Free space)
General information
AC power Brand name: PHILIPS;
Model: AS600-180-
AA250
Input: 100-240 V~,
50/60 Hz, 1.5A;
Output: 18.0V 2.5A
Charging Voltage and
Current
5V 2.1A
Operation Power
Consumption
< 20 W
Standby Power
Consumption
< 0.5 W
Dimensions - Main
Unit (W x H x D)
335 x 180 x 145 mm
Weight - Main Unit 2.2 kg
11EN
8 Troubleshooting
Warning
•Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
General
No power
•Make sure that the AC power plug of the
unit is connected properly.
•Make sure that there is power at the AC
outlet.
No sound or poor sound
•Adjust volume on the product.
•Adjust volume on the connected device.
No response from the speaker
•Restart the speaker.
The LED indicator is solid green, and the
speaker has no response when pressing any
key.
•The speaker is in DEMO mode. Press and
hold for 15 seconds to exit this mode.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
•The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
Cannot connect with the device.
•The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
•This product is already connected with
another Bluetooth-enabled device.
Disconnect that device and then try again.
The paired device connects and disconnects
constantly.
•The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
•For some devices, Bluetooth connection
may be deactivated automatically as a
power-saving feature. This does not indicate
any malfunction of this product.
2015 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under
the responsibility of Gibson Innovations Ltd., and Gibson
Innovations Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used under
license from Koninklijke Philips N.V.
BT7500B_12_UM_V3.0