Philips D6351W/FR User Manual
Displayed below is the user manual for D6351W/FR by Philips which is a product in the Telephones category. This manual has pages.
Related Manuals
D630
D635
Register your product and get support at
www.philips.com/support
Short user manual
05.en en UK adaptor
Important safety instructions
Warning
• The Electrical network is classified as hazardous. The
only way to power down the charger is to unplug the
power supply from the electrical outlet. Ensure that
the electrical outlet is always easily accessible.
• Refer to safety information before using the product.
• This product complies with European R&TTE
directive 1999/5/EC.
• Use only the power supply listed in the user
instructions.
• Use only the batteries listed in the user instructions.
• Do not allow the product to come into contact with
liquids.
• Risk of explosion if battery is replaced by an incorrect
type.
• Dispose of used batteries according to the
instructions.
• When the handset rings or when the handsfree is
activated, keep the handset away from your ear to
avoid hearing damage.
When using the phone as a baby monitor
• Children should be supervised to ensure that they do
not play with the appliance.
• Make sure the baby unit and the cord are always out
of reach of the baby (at least 1 metre/3 feet away).
• Keep the parent unit at least 1.5 metres/5 feet away
from the baby unit to prevent acoustic feedback.
• Never place the baby unit inside the baby’s bed or
playpen.
• Never cover the parent unit and the baby unit with
anything (e.g. a towel or blanket). Always make sure
the cooling vents of the baby unit are free.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• If you place the parent unit next to a transmitter or
other DECT appliance (e.g. a DECT telephone or
wireless router for the internet), the connection with
the baby unit may be lost. Move the baby monitor
further away from the other wireless appliances until
the connection is restored.
• This baby monitor is intended as an aid. It is not
a substitute for responsible and proper adult
supervision and should not be used as such.
1Overview
In call
Phonebook / redial list
Change the sound prole.
Adjust the volume.
Recall (network dependent).
End calls.
Enter a pause (press and hold).
Turn the speaker on/off.
Mute/unmute the microphone.
Standby
Access the main menu.
Access the redial list.
Phonebook
Call log
Make and receive calls.
Switch the handset on or off (press and hold).
Make intercom call (press and hold).
Lock/unlock the keypad (press and hold).
Make and receive calls through the speaker.
D635 only: Press to play new message from
the answer machine. / Access to the answer
machine menu.
In menu
Conrm / Select / Enter the option menu.
Cancel / back
Up / down
Exit menu.
In text input
Delete text.
Enter a space.
Switch upper/lower case (press and hold).
Left / right
Main menu icons
Alarm Phonebook
Services Sounds
Phone setup Baby monitor
Privacy mode Answering machine
(D635 only)
Incoming calls (D630 only)
Display icons
It shows the connection status between the
handset and base station. The more bars are
shown, the better the signal strength is.
It remains steadily on when browsing incoming
calls in the call log.
It remains steadily on when browsing outgoing
calls in the redial list.
It ashes when there is a new missed call. It
remains steadily on when browsing unread
missed calls in call log, or when browsing the
read missed calls in call log.
It remains steadily on when browsing blocked
calls in call log.
It ashes when there is an incoming mobile
number.
It ashes when there is an incoming home
number.
It ashes when there is an incoming ofce
number.
The speaker is on.
The ringer is off. The silent mode is set and
within active period (the phone does not ring).
The silent mode is set, but is outside of active
period.
The alarm is activated.
D635 only: Answering machine: it ashes when
there is a new message or when the memory is
full. It is displayed when the telephone answering
machine is turned on.
Voice messages indicator: ashes for new
messages, is steady for reviewed messages.
* This is network dependent.
ECO
The Eco mode is activated.
ECO+
The ECO+ mode is activated.
D635D630
/
/
Loudspeaker
Find handset
(bottom)
Microphone
Earpiece
Loudspeaker
(back side)
Display icons
2Connect
Multi-handset version
only.
1 2 3
3Get started
Insert batteries Charge your phone
Charge 8 hours
Congure your phone
1 When using your phone for the rst time, you
see a welcome message (country dependent).
2 Set the country and language if prompted.
3 Set the date and time.
• If the time is in 12-hour format, press
/ to select [am] or [pm] (country
dependent).
> 70%
40% - 70%
10% - 40%
Flashing: low battery
Scrolling: charging in progress
4Enjoy
Phonebook
Add record
1 Press .
2 Select [Option] > [Add new].
3 Follow on-screen instructions.
Call from the phonebook
1 Press .
2 Select a record and press .
Direct access memory
You have up to 9 direct access memories (keys 1
to 9). To dial the saved phone number automatically,
press and hold on the keys in standby mode.
Depending on your country, keys 1 and 2 are
preset to the voice mail number and information
service number of your service provider respectively
(network dependent).
Call log
Call from the call log
1 Press .
2 Select a record and press .
View record
Press > [Incoming calls] (D635 only) >
[Option] > [View].
Save record
1 Press > [Incoming calls] (D635 only) >
[Option] > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press > [Incoming calls] (D635 only) >
[Option] > [Delete].
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press [Redial].
2 Select a record and press .
Save record
1 Press [Redial] > [Option] > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press [Redial] > [Option] > [Delete].
2 Follow on-screen instructions.
Record an announcement
(for D635 only)
1 Press [Menu]
2 Press / to select > [Announcement].
3 Follow on-screen instructions.
Register additional handsets
You can register additional handsets to the base
station.
1 Press [Menu].
2 Press / to select > [Register].
3 Press and hold on the base station for
10 seconds.
4 Enter the system PIN/passcode (0000).
5 Press [OK] to conrm the PIN/passcode.
» Registration is complete in less than 2 minutes.
Restore default settings
You can reset your phone settings to the original
factory settings.
1 Press [Menu].
2 Press / to select > [Reset]
3 Follow on-screen instructions.
Note
• You may recall the original PIN/passcode by
following this procedure.
5Learn more
Silent mode
Sets time during which the phone will not ring.
> [Silent mode]
MySound
Customizes the sound of voices to your liking.
> [MySound]
Eco mode
Reduces power consumption / transmission power;
reduces radiation and range by approximately 60%.
> [Eco mode]
ECO+ mode
Eliminates radiation in standby mode (causes 2
seconds ring delay, 50% shorter standby time).
> [ECO+ mode]
Privacy mode
Blocks incoming calls / block outgoing calls.
> [Call barring]/[Call block]
Technical data
Battery
Philips: 2 x AAA NiMH 1.2 V Rechargeable 650 mAh
batteries
Use only the supplied batteries.
Adapter (Base and charger:)
Tenpao: S003GB0600050
Input: 100-240 V~, 50/60 Hz 150 mA
Output: 6 Vdc 500 mA
Phonebook with 100 entries
Call log with 50 entries
Talk time: 18 hours
Standby time: 250 hours
Note
• You can install a DSL (digital subscriber line) lter to
prevent noise and caller ID problems caused by the
DSL interference.
• You can nd the Declaration of Conformity on
www.p4c.philips.com.
Frequently asked questions
No signal bar is displayed on the screen.
• The handset is out of range. Move it closer to the
base station.
• If the handset displays
[Register your Handset], register your
handset. (See the section on “Register additional
handsets”).
If I fail to pair (register) the additional handsets to
the base station, what do I do?
• Your base memory is full. Access > >
[Unregister] to unregister the unused handsets
and try again.
• If registration fails, unplug the power adapter
from the base station and plug it back. Wait for
15 seconds, and then repeat the registration
procedure.
I have chosen a wrong language which I cannot
read, what do I do?
1 Press to go back to the standby screen.
2 Press to access the main menu screen.
3 Press / to select , then you see one of the
following texts appear on the screen:
[Language]
[Langue]
[Sprache]
[Lingua]
4 Select them to access the language options.
5 Select your own language.
My handset is in searching or unavailable status,
what do I do?
• Make sure that the base station has power supply.
• Register the handset to the base station.
• Move the handset closer to the base station.
I cannot change the settings of my voice mail, what
do I do?
The voice mail service is managed by your service
provider but not the phone itself. Contact your
service provider to change the settings.
No display
• Make sure the batteries are charged.
• Make sure there are power and phone
connections.
The handset on the charger does not charge.
• Make sure the batteries are inserted correctly.
• Make sure the handset is placed properly on the
charger. The battery icon animates when charging.
• Make sure the docking tone setting is turned on.
When the handset is placed correctly on the
charger, you can hear a docking tone.
• The charging contacts are dirty. Disconnect the
power supply rst and clean the contacts with a
damp cloth.
• Batteries are defective. Purchase new ones with
the same specications.
Bad audio (crackles, echo, etc.)
• The handset is nearly out of range. Move it closer
to the base station.
• The phone receives interference from the nearby
electrical appliances. Move the base station away
from them.
• The phone is at a location with thick walls. Move
the base away from them.
The handset does not ring.
Make sure the handset ringtone is turned on.
The caller ID does not display.
• The service is not activated. Check with your
service provider.
• The caller’s information is withheld or unavailable.
www.philips.com/support
To access the user instructions online, use the
reference model number written on the product
label at the bottom of the base station.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
2015 © Gibson Innovations Limited.
All rights reserved.
This product has been manufactured by, and is sold
under the responsibility of Gibson Innovations Ltd.,
and Gibson Innovations Ltd. is the warrantor in
relation to this product.
Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used
under license from Koninklijke Philips N.V.
UMS_D630/635
05_EN_V1.0
WK15275
0168 0168 0168 0168