Philips DCB3070/10 User Manual

Displayed below is the user manual for DCB3070/10 by Philips which is a product in the Home Audio Systems category. This manual has pages.

Related Manuals

Philips DCB3070/79 Manual

Eaton 93PS-10+10(40)-40-4x7Ah-LL-SB-6 Manual

Eaton 93PS-10+10(40)-40-4x7Ah-LL-SB-MBS-6 Manual

Eaton 93PS-10+10(40)-40-2x9Ah-SB-6 Manual

Eaton 93PS-10+10(40)-40-2x9Ah-SB-MBS-6 Manual

Eaton 93PS-10+10(40)-40-4x9Ah-SB-6 Manual

Eaton 93PS-10+10(40)-40-4x9Ah-SB-MBS-6 Manual

Eaton 91PS-10+10(30)-30-0-SB-6 Manual

DCB3070

www.philips.com/welcome

EN User manual 3

DE Benutzerhandbuch 23

ES Manual del usuario 45

FR Mode d’emploi 67

IT Manuale utente 89

NL Gebruiksaanwijzing 111

PT Manual do utilizador 133

SV Användarhandbok 153

DCB3070_10_UM_Book 1_V2.0.indb 1 4/23/2012 12:30:40 PM

Important notes for users in the U.K.

Mains fuse

This information applies only to products with a UK mains plug.

This product is tted with an approved non-molded plug. If you replace the fuse, use one with:

• the ratings shown on the plug,

• a BS 1362 approval, and

• the ASTA approval mark.

Contact your dealer if you are not sure about what type of fuse to use.

Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the

power cord.

How to connect a plug

The wires in the power cord are colored as follows: blue = neutral (N), brown = live (L).

If the colors do not correspond with the colors on your plug, identify the terminals in your plug as

follows:

1 Connect the blue wire to the terminal marked N or colored black.

2 Connect the brown wire to the terminal marked L or colored red.

3 Do not connect either wire to the earth terminal in the plug, marked E (or e) or colored green (or

green and yellow).

Before you replace the plug cover, make sure that the cord grip is clamped over the sheath of the cable

and not just over the two wires in the cable.

DCB3070_10_UM_Book 1_V2.0.indb 2 4/23/2012 12:30:40 PM

English

Contents

1 Important 4

Safety 4

Notice 5

2 Your product 7

Introduction 7

What's in the box 7

Overview of the main unit 8

Overview of the remote control 9

3 Get started 10

Placement 10

Prepare the remote control 10

Connect power 11

Store DAB stations 11

Set clock 11

Turn on 12

4 Play 12

Play disc 12

Play from USB 12

Pause/resume play 12

Skip to a track 13

Search within a track 13

Display play information 13

Repeat and shufe play 13

Program tracks 13

5 Adjust sound 14

Adjust volume 14

Select a preset sound effect 14

Enhance bass 14

Mute sound 14

6 Listen to radio 14

Listen to DAB radio 14

Listen to FM radio 16

7 Play iPod/iPhone/iPad 17

Compatible iPod/iPhone/iPad 17

Load the iPod/iPhone/iPad 17

Listen to the iPod/iPhone/iPad 17

Charge the iPod/iPhone/iPad 17

8 Other features 18

Set the alarm timer 18

Set the sleep timer 18

Play from an external device 18

Headphone 18

9 Product information 19

Specications 19

USB playability information 19

Supported MP3 disc formats 20

Maintenance 20

10 Troubleshooting 20

DCB3070_10_UM_Book 1_V2.0.indb 3 4/23/2012 12:30:40 PM

4EN

1 Important

Safety

This 'bolt of lightning' indicates uninsulated

material within your unit may cause an electrical

shock. For the safety of everyone in your

household, please do not remove product

covering.

The 'exclamation point' calls attention to

features for which you should read the enclosed

literature closely to prevent operating and

maintenance problems.

WARNING: To reduce the risk of re or electric

shock, this apparatus should not be exposed to

rain or moisture and objects lled with liquids,

such as vases, should not be placed on this

apparatus.

CAUTION: To prevent electric shock, match

wide blade of plug to wide slot, fully insert.

Important Safety Instructions

a Read these instructions.

b Keep these instructions.

c Heed all warnings.

d Follow all instructions.

e Do not use this apparatus near water.

f Clean only with dry cloth.

g Do not block any ventilation openings.

Install in accordance with the

manufacturer's instructions.

h Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including ampliers) that

produce heat.

i Protect the power cord from being

walked on or pinched, particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

j Only use attachments/accessories

specied by the manufacturer.

k Use only with the cart,

stand, tripod, bracket,

or table specied by the

manufacturer or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

l Unplug this apparatus during lightning

storms or when unused for long periods

of time.

m Refer all servicing to qualied service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

n Battery usage CAUTION – To prevent

battery leakage which may result in bodily

injury, property damage, or damage to

the unit:

• Install all batteries correctly, + and - as

marked on the unit.

• Do not mix batteries (old and new or

carbon and alkaline, etc.).

DCB3070_10_UM_Book 1_V2.0.indb 4 4/23/2012 12:30:41 PM

English

• Remove batteries when the unit is not

used for a long time.

• Batteries (battery pack or batteries

installed) shall not be exposed to

excessive heat such as sunshine, re or

the like.

o Apparatus shall not be exposed to

dripping or splashing.

p Do not place any sources of danger on

the apparatus (e.g. liquid lled objects,

lighted candles).

q Where the MAINS plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

Warning

•Never remove the casing of this apparatus.

•Never lubricate any part of this apparatus.

•Never place this apparatus on other electrical

equipment.

•Keep this apparatus away from direct sunlight, naked

ames or heat.

•Never look into the laser beam inside this apparatus.

•Ensure that you always have easy access to the power

cord, plug or adaptor to disconnect this apparatus from

the power.

Note

•The type plate is located at the rear of the apparatus.

Hearing safety

Listen at a moderate volume.

• Using headphones at a high volume can

impair your hearing. This product can

produce sounds in decibel ranges that may

cause hearing loss for a normal person,

even for exposure less than a minute. The

higher decibel ranges are offered for those

that may have already experienced some

hearing loss.

• Sound can be deceiving. Over time your

hearing 'comfort level' adapts to higher

volumes of sound. So after prolonged

listening, what sounds 'normal' can actually

be loud and harmful to your hearing. To

guard against this, set your volume to a safe

level before your hearing adapts and leave

it there.

To establish a safe volume level:

• Set your volume control at a low setting.

• Slowly increase the sound until you can

hear it comfortably and clearly, without

distortion.

Listen for reasonable periods of time:

• Prolonged exposure to sound, even

at normally 'safe' levels, can also cause

hearing loss.

• Be sure to use your equipment reasonably

and take appropriate breaks.

Be sure to observe the following guidelines

when using your headphones.

• Listen at reasonable volumes for

reasonable periods of time.

• Be careful not to adjust the volume as your

hearing adapts.

• Do not turn up the volume so high that

you can't hear what's around you.

• You should use caution or temporarily

discontinue use in potentially hazardous

situations. Do not use headphones while

operating a motorized vehicle, cycling,

skateboarding, etc.; it may create a trafc

hazard and is illegal in many areas.

Notice

Any changes or modications made to this

device that are not expressly approved by

Philips Consumer Lifestyle may void the user’s

authority to operate the equipment.

DCB3070_10_UM_Book 1_V2.0.indb 5 4/23/2012 12:30:41 PM

6EN

This product complies with the radio

interference requirements of the European

Community.

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

When this crossed-out wheeled bin symbol is

attached to a product it means that the product

is covered by the European Directive 2002/96/

EC.

Please inform yourself about the local separate

collection system for electrical and electronic

products.

Please act according to your local rules and

do not dispose of your old products with your

normal household waste. Correct disposal of

your old product helps to prevent potential

negative consequences for the environment and

human health.

Your product contains batteries covered by

the European Directive 2006/66/EC, which

cannot be disposed with normal household

waste.Please inform yourself about the local

rules on separate collection of batteries

because correct disposal helps to prevent

negative consequences for the environmental

and human health.

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

The making of unauthorized copies of copy-

protected material, including computer

programs, les, broadcasts and sound

recordings, may be an infringement of

copyrights and constitute a criminal offence.

This equipment should not be used for such

purposes.

“Made for iPod,” “Made for iPhone,” and “Made

for iPad” mean that an electronic accessory

has been designed to connect specically to

iPod, iPhone, or iPad, respectively, and has

been certied by the developer to meet

Apple performance standards. Apple is not

responsible for the operation of this device

or its compliance with safety and regulatory

standards. Please note that the use of this

accessory with iPod, iPhone, or iPad may affect

wireless performance.

iPad, iPhone, iPod, iPod nano, and iPod touch are

trademarks of Apple Inc., registered in the U.S.

and other countries.

Windows Media and the Windows logo

are trademarks, or registered trademarks of

Microsoft Corporation in the United States

and/or other countries.

DCB3070_10_UM_Book 1_V2.0.indb 6 4/23/2012 12:30:42 PM

English

This apparatus includes this label:

2 Your product

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With this unit, you can enjoy audio from discs,

iPod/iPhone/iPad, USB devices, and other

external devices, or listen to radio stations.

The unit offers Digital Sound Control (DSC)

and Dynamic Bass Boost (DBB) to enrich

sound.

The unit supports the following media formats:

What's in the box

Check and identify the contents of your

package:

• Main unit

• Remote control

• 2 x AAA batteries

• AC power cable

• 1 x MP3 link cable

• Quick start guide

• User manual

• Wall mounting instructions

• Mounting kit (2 dowels and 2 screws)

DCB3070_10_UM_Book 1_V2.0.indb 7 4/23/2012 12:30:43 PM

8EN

Overview of the main unit

• Turn on the unit, switch to standby

mode, or switch to Eco Power standby.

b SOURCE

• Select a source: CD, DAB radio, FM

radio, iPod/iPhone/iPad, USB, or MP3

link.

c /

• Skip to the previous/next track.

• Search within a track.

• Tune to a radio station.

d /OK

• Start or pause play.

• Conrm a selection.

• For FM radio, select stereo or mono

sound output.

e /MENU

• Stop play.

• Access the iPod/iPhone menu, or the

DAB menu.

f VOLUME + / -

• Adjust volume.

• Open/close the disc compartment.

M3LNK

lmn

defg

h Display panel

• Show current status.

i Disc compartment door

j Dock for iPod/iPhone/iPad

k Remote sensor

• Detect signal from the remote control.

• Connector for a headphone.

• Connector for a USB mass storage

device.

n MP3 LINK

• Connector (3.5mm ) for an external

audio device.

o FM antenna

• Improve FM reception.

p AC MAINS

• Connector for the AC power cable.

DCB3070_10_UM_Book 1_V2.0.indb 8 4/23/2012 12:30:44 PM

English

Overview of the remote

control

DAB

PRESET/A BUM

PROG/

CLOCK SET

SLEEP/

TIMER

DSCDBB

VOL

456

789

DOCK

DISPLAY

RDS

USB

LINK

MODE/

SCAN

• Turn on the unit, switch to standby

mode, or switch to Eco Power standby.

• Mute or restore volume.

c CD

• Select disc source.

d /

• Skip to the previous/next track.

• Search within a track.

• Tune to a radio station.

e USB/MP3 LINK

• Select USB device source.

• Select external audio device source.

f RDS/DISPLAY

• Select RDS broadcast information.

• Select display information during play.

• Start or pause play.

• For FM radio, select stereo or mono

sound output.

h VOL +/-

• Adjust volume.

i Numeric keypad

• Select a track from a disc directly.

j PROG/CLOCK SET

• Program radio stations.

• Set the clock.

• Program tracks.

k SLEEP/TIMER

• Set the sleep timer.

• Set the alarm timer.

l DSC

• Select a preset sound setting.

m DBB

• Turn dynamic bass enhancement on

or off.

n MODE/SCAN

• Select repeat/shufe play.

DCB3070_10_UM_Book 1_V2.0.indb 9 4/23/2012 12:30:45 PM

10 EN

• Search and store DAB/FM radio

stations.

o /MENU

• Stop play.

• Access the iPod/iPhone menu, or the

DAB menu.

p DOCK

• Select iPod/iPhone/iPad source.

q OK

• Conrm a selection.

r PRESET/ALBUM /

• Skip to the previous/next album.

• Select a preset radio station.

• Navigate the iPod/iPhone/iPad menu.

s FM/DAB

• Select FM or DAB radio source.

3 Get started

Caution

•Use of controls or adjustments or performance of

procedures other than herein may result in hazardous

radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in

sequence.

If you contact Philips, you will be asked for the

model and serial number of this apparatus. The

model number and serial number are on the

rear of the apparatus. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Placement

You can place the unit on a at surface or

mount the unit on a wall.

Mount on a wall

To wall mount the unit, see the included

separate sheet of wall mounting instructions.

Prepare the remote control

Caution

•Risk of explosion! Keep batteries away from heat,

sunshine, or re. Never discard batteries in re.

To insert the remote control battery:

1 Open the battery compartment.

2 Insert 2 AAA batteries with correct

polarity (+/-) as indicated.

3 Close the battery compartment.

DCB3070_10_UM_Book 1_V2.0.indb 10 4/23/2012 12:30:45 PM

English

Note

•If you are not going to use the remote control for a

long time, remove the batteries.

•Do not use old and new or different types of batteries

in combination.

•Batteries contain chemical substances, so they should

be disposed of properly.

Connect power

Caution

•Risk of product damage! Make sure that the power

supply voltage corresponds to the voltage printed on

the rear of the main unit.

•Before connecting the AC cord, make sure that you

have completed all other connections.

Note

•The type plate is located on the rear of the main unit.

1 Connect the AC power cable to:

• the AC MAINS connector on the rear

of the unit.

• the wall socket.

Store DAB stations

When you connect AC power and no DAB

stations are stored, the unit prompts you to

search and store all the available DAB stations.

1 Connect the unit to the power supply.

» [FULL SCAN](full scan) is displayed.

2 Press OK to start to search and store

DAB stations.

» The unit stores all the available DAB

stations.

» When all the available DAB stations

are stored, the rst stored DAB station

is broadcast.

Note

•Position the antenna as far as possible from TV, VCR, or

other radiation source.

•For optimal reception, fully extend and adjust the

position of the antenna.

Set clock

Note

•You can set the clock in standby mode only.

1 Press to switch the unit to standby.

• Make sure that --:-- (or clock) is

displayed (see "Turn on" > "Switch to

standby").

2 Press and hold PROG/CLOCK SET to

activate the clock setting mode.

» SET CLOCK is displayed.

» The 12 hour or 24 hour format is

displayed.

3 Press / to select 12 hour or 24

hour format.

4 Press PROG/CLOCK SET.

» The hour digits begin to blink.

5 Press / to set the hour.

6 Press PROG/CLOCK SET.

» The minute digits begin to blink.

7 Press / to set the minute.

8 Press PROG/CLOCK SET to conrm.

DCB3070_10_UM_Book 1_V2.0.indb 11 4/23/2012 12:30:46 PM

12 EN

Turn on

1 Press .

» The unit switches to the last selected

source.

Switch to standby

1 When the unit is turned on, press to

switch the unit to standby.

• In standby, press and hold to switch

from normal standby to Eco power

standby or vice versa.

» In normal standby, the clock (if set)

appears on the display panel.

» In Eco power standby, the backlight on

the display panel turns off.

4 Play

Play disc

1 Press CD to select the disc source.

2 Press on the unit to open the disc

compartment.

3 Insert a disc with the printed side facing

outward, and then press to close the disc

compartment.

4 If the disc doesn't play, press .

• To stop play, press .

Play from USB

Note

•Make sure that the USB storage device contains

playable audio content.

1 Connect the USB storage device into the

connector on the back panel of this

unit.

2 Press USB to select the USB source.

» Play starts automatically.

• To select a folder, press .

• To select an audio le, press / .

• To start play, press .

• To stop play, press .

Pause/resume play

1 During play, press to pause/resume

play.

DCB3070_10_UM_Book 1_V2.0.indb 12 4/23/2012 12:30:46 PM

English

Skip to a track

For CD:

1 Press / to select another track.

• To select a track directly, you can also

press a key on the numerical keypad.

For MP3 disc and USB:

1 Press to select an album or folder.

2 Press / to select previous/next track

or le.

Search within a track

1 During play, press and hold / .

2 Release to resume normal play.

Display play information

1 During play, press DISPLAY repeatedly to

select different play information.

Repeat and shufe play

1 During play, press MODE/SCAN

repeatedly to select a play option.

• : the current track is played

repeatedly.

• : all the tracks are played

repeatedly.

• : all tracks are played in a random

order.

2 To return to normal play, press MODE/

SCAN repeatedly until no repeat/shufe

option is displayed.

• You may also press to cancel repeat/

shufe play.

Tip

•Shufe play is not available when programmed tracks

are played.

Program tracks

You can program a maximum of 20 tracks.

1 In CD/USB mode, in the stop position,

press PROG/CLOCK SET to activate the

program mode.

» [PROG] (program) and track number

begin to blink.

2 For MP3 tracks, press to select an

album.

3 Press / to select a track number,

then press PROG/CLOCK SET to conrm.

4 Repeat steps 2 to 3 to program more

tracks.

5 Press to play the programmed tracks.

» During play, [PROG] (program) is

displayed.

• To erase the program, in the stop

position, press .

» [PROG] disappears on the display.

DCB3070_10_UM_Book 1_V2.0.indb 13 4/23/2012 12:30:47 PM

14 EN

5 Adjust sound

Adjust volume

1 During play, press VOL +/- to increase/

decrease the volume.

Select a preset sound effect

1 During play, press DSC repeatedly to select

a preset sound setting.

Enhance bass

1 During play, press DBB to turn dynamic

bass enhancement on or off.

» If DBB is activated, DBB is displayed.

Mute sound

1 During play, press to mute/restore the

speakers.

6 Listen to radio

Listen to DAB radio

DAB (Digital Audio Broadcasting) radio

broadcasts radio digitally through a network of

transmitters.

Store DAB stations

Before you can listen to DAB radio, store DAB

stations onto the unit.

If you connect the unit to AC power supply

and no DAB station is stored, the unit prompts

you to search and store all the available DAB

stations (see "Get started" > "Store DAB

stations").

1 Press FM/DAB to turn on DAB radio.

2 Press MODE/SCAN.

» The unit begins to perform a search.

» When all the available DAB stations

are stored, the rst stored DAB station

is broadcast.

Tip

•The signal icon (*) is displayed, and its position indicates

a degree of signal strength. The further towards the

right, the stronger the signal strength.

•If no DAB coverage is currently available or no DAB

station is found, [NO DAB] (no DAB) is displayed.

Tune to a DAB station

After DAB stations are stored, you can tune to

a DAB station.

1 In DAB mode, press / repeatedly

until a station name is displayed.

DCB3070_10_UM_Book 1_V2.0.indb 14 4/23/2012 12:30:48 PM

English

2 Press OK to conrm the selection.

» The radio immediately tunes to the

selected station.

Note

•Position the antenna as far as possible from TV, VCR, or

other radiation source.

•For optimal reception, fully extend and adjust the

position of the antenna.

Program DAB stations manually

You can program a maximum of 20 preset DAB

stations.

1 Tune to a DAB station.

2 Press PROG/CLOCK SET to activate

program mode.

3 Press to allocate a number (1-20) to

this radio station, and then press PROG/

CLOCK SET to conrm.

4 Repeat the above steps to program other

stations.

Note

•If a DAB station is stored under a preset location, a

new DAB station assigned to this location overwrites

the old DAB station.

•DAB station presets do not overwrite FM presets.

Select a preset DAB station

After the DAB stations are programmed on the

unit, you can select a preset DAB station.

1 In DAB mode, press to select a

preset number.

Display DAB information

In DAB mode, you may press RDS/DISPLAY

repeatedly to select different information for

the current DAB station.

Use the DAB menu

1 In DAB mode, press MENU.

» The rst menu option is displayed.

2 Press / repeatedly to display the

menu options:

• [FULL SCAN] (full scan): search and

store all the available DAB stations.

• [MANUAL] (manual): manually tune to

a DAB station.

• [DRC]: add or remove a degree of

compensation for differences in the

dynamic range between DAB stations.

You may experiment with the options

on different source materials to decide

which option suits best.

• [SYSTEM] (system): reset all DAB

settings to the default settings made

at the factory; display the software

version of this unit; enter a stage of

software upgrade.

• [STATION] (station): display a list of

available DAB stations.

3 Press OK to conrm the selection.

4 If a sub-option is available, repeat step 2

and step 3.

Update software (if available)

Software update for your radio may be available

in future.

How to know a software update:

• register this unit at Philips website

(www.philips.com/welcome) with a

valid email address, and you may receive

software update notication if available. Or,

• visit Philips website constantly to check if

the updating information is provided.

To update software of your radio, follow these

steps strictly:

1 Read carefully the software update

instructions on Philips website.

DCB3070_10_UM_Book 1_V2.0.indb 15 4/23/2012 12:30:48 PM

16 EN

2 Download the software update to your

PC, and then connect the unit to the PC

via the USB connector.

3 In DAB mode, press MENU.

4 Select [SYSTEM] (system) > [UPGRADE]

(upgrade), and then follow the instructions

displayed to go to the upgrade stage.

• To select an option, press / ; to

conrm a selection, press OK.

5 On the PC, follow the instructions on the

screen to complete upgrade.

Listen to FM radio

Tune to a FM station

1 Press FM.

2 Press and hold / for more than 2

seconds.

» [SEARCH] (search) is displayed.

» The radio tunes to a station with

strong reception automatically.

3 Repeat step 2 to tune to more stations.

• To tune to a weak station, press /

repeatedly until you nd optimal

reception.

• To achieve sound quality, press

repeatedly to select stereo or mono

sound.

Note

•Position the antenna as far as possible from TV, VCR, or

other radiation source.

•For optimal reception, fully extend and adjust the

position of the antenna.

Program FM stations automatically

You can program a maximum of 20 preset FM

stations.

1 In FM mode, press and hold MODE/

SCAN for more than 2 seconds to activate

automatic program mode.

» [AUTO] (auto) is displayed.

» All available stations are programmed.

» The rst programmed radio station is

broadcast automatically.

Program FM stations manually

You can program a maximum of 20 preset FM

stations.

1 Tune to a radio station.

2 Press PROG/CLOCK SET to activate

program mode.

» [PROG] (program) begins to blink.

3 Press to allocate a number (1 to 20)

to this radio station, and then press PROG/

CLOCK SET to conrm.

4 Repeat the previous steps to program

other stations.

Note

•To overwrite a programmed FM station, store another

FM station in its place.

Select a preset FM station

1 In FM mode, press to select a preset

number.

FM stations with RDS

Radio Data System (RDS) is a service that

sends additional broadcast information along

with FM stations.

If you listen to a FM station with RDS signal,

"RDS" is displayed.

Display RDS information

1 For a FM station with RDS, press RDS

repeatedly to display various broadcast

information.

DCB3070_10_UM_Book 1_V2.0.indb 16 4/23/2012 12:30:48 PM

English

7 Play iPod/

iPhone/iPad

You can enjoy audio from iPod/iPhone/iPad

through this unit.

Compatible iPod/iPhone/iPad

The unit supports the following iPod, iPhone

and iPad models.

Made for:

iPod touch (1st, 2nd, 3rd, and 4th generation)

iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th

generation)

iPhone 4

iPhone 3GS

iPhone 3G

iPhone

iPad 2

iPad

Load the iPod/iPhone/iPad

1 Push the dock compartment to open it.

2 Place the iPod/iPhone/iPad in the dock.

Install the rubber pad

If necessary, install the supplied rubber pad to

keep the iPad/iPad 2 stable before you place

the iPad/iPad 2.

Listen to the iPod/iPhone/

iPad

1 Make sure that the iPod/iPhone/iPad is

correctly placed.

2 Press DOCK to select the iPod/iPhone/

iPad source.

3 Play music on the iPod/iPhone/iPad.

• To pause/resume play, press .

• To skip to a track, press / .

• To search during play, press and hold

/ , and then release to resume

normal play.

• To navigate the menu, press MENU,

and press to select an option, and

then press OK to conrm.

Charge the iPod/iPhone/iPad

When the unit is connected to power, the

docked iPod/iPhone/iPad begins to charge.

Note

•The following iPod models cannot be charged: iPod

classic, iPod with video, and iPod with color display.

•In Eco power standby mode, charge is not available.

DCB3070_10_UM_Book 1_V2.0.indb 17 4/23/2012 12:30:49 PM

18 EN

8 Other features

Set the alarm timer

This unit can be used as an alarm clock. The

disc/radio/USB/docked product is activated to

play at a preset time.

1 Make sure that you have set the clock

correctly.

2 Press to switch the unit to standby.

• Make sure that the clock is displayed

(see "Turn on" > "Switch to standby").

3 Press and hold SLEEP/TIMER.

» A prompt to select the source is

displayed.

4 Press CD, FM, USB or DOCK to select a

source.

5 Press SLEEP/TIMER to conrm.

» The clock digits are displayed and

begin to blink.

6 Press / to set the hour.

7 Press SLEEP/TIMER to conrm.

8 Press / to set the minute.

» The timer is set and activated.

To deactivate or re-activate an alarm timer

1 Press to switch to standby mode.

2 Press SLEEP/TIMER repeatedly to activate

or deactivate timer.

» If timer is activated, the display shows

» If timer is deactivated, disappears on

the display.

Note

•In MP3 link mode, the alarm timer cannot be set.

•If disc/USB/dock source is selected and the audio

cannot be played, tuner is activated automatically.

Set the sleep timer

This unit can switch to standby automatically

after a set period of time.

1 When the unit is turned on, press SLEEP/

TIMER repeatedly to select a set period of

time (in minutes).

» When sleep timer is activated, is

displayed.

To deactivate sleep timer

1 Press SLEEP/TIMER repeatedly until [OFF]

(off) is displayed.

» When sleep timer is deactivated,

disappears on the display.

Play from an external device

You can also listen to an external audio device

through this unit.

1 Press MP3 LINK to select the MP3 link

source.

2 Connect the supplied MP3 link cable to:

• the MP3 LINK connector (3 5mm) on

the unit.

• the headphone connector on an

external device.

3 Start to play the device (see the device's

user manual).

Headphone

Plug headphones (not supplied) into the

connector on the unit to listen through the

headphones.

DCB3070_10_UM_Book 1_V2.0.indb 18 4/23/2012 12:30:50 PM

English

9 Product

information

Note

•Product information is subject to change without prior

notice.

Specications

Amplier

Rated Output Power 2 x 20W RMS

Frequency Response 60 Hz - 16 kHz,

±3 dB

Signal to Noise Ratio >65dBA

MP3 link input 500mv, 20kohm

Tuner

Tuning Range FM:87.5 - 108 MHz

DAB:174.928MHz-

239.200MHz (Band III)

Tuning grid 50 KHz

FM sensitivity

- Mono 26 dB

DAB sensitivity

- (EN50248) < -95 dBm

Total Harmonic

Distortion <2%

Signal to Noise Ratio >55 dB

Number of presets 20 (FM)

Speakers

Speaker Impedance 8 ohm

Speaker Driver 2 X 2.5" full range

Sensitivity >82 dB/m/W

General information

AC power AC 100-240V~,

50/60 Hz

Operation Power

Consumption

32 W

Eco Standby Power

Consumption

<1 W

USB Direct Version 2.0/1.1

Dimensions

- Main Unit

(W x H x D) 500 x 217 x 98 mm

Weight

- Main Unit 2.614 kg

USB playability information

Compatible USB storage devices:

• USB ash memory (USB 2.0 or USB1.1)

• USB ash players (USB 2.0 or USB1.1)

• memory cards (requires an additional card

reader to work with this system)

Supported formats:

• USB or memory le format FAT12, FAT16,

FAT32 (sector size: 512 bytes)

• MP3 bitrate (data rate): 32-320 Kbps and

variable bitrate

• Directory nesting up to a maximum of 8

levels

• Number of albums/ folders: maximum 99

• Number of tracks/titles: maximum 999

• ID3 tag v2.0 or later

• File name in Unicode UTF8 (maximum

length: 128 bytes)

Unsupported formats:

• Empty albums: an empty album is an album

that does not contain MP3 les, and is not

shown in the display.

• Unsupported le formats are skipped. For

example, Word documents (.doc) or MP3

les with extension .dlf are ignored and

not played.

• AAC, WAV, PCM audio les

DCB3070_10_UM_Book 1_V2.0.indb 19 4/23/2012 12:30:50 PM

20 EN

• DRM protected WMA les (*.wav, *.m4a,

*.m4p, *.mp4, *.aac)

• WMA les in Lossless format

Supported MP3 disc formats

• ISO9660, Joliet

• Maximum title number: 999 (depending on

le name length)

• Maximum album number: 99

• Supported sampling frequencies: 32 kHz,

44.1kHz, 48 kHz

• Supported Bit-rates: 32~256 (kbps),

variable bit rates

Maintenance

Clean the cabinet

• Use a soft cloth slightly moistened with

a mild detergent solution. Do not use a

solution containing alcohol, spirits, ammonia

or abrasives.

Clean discs

• When a disc becomes dirty,

clean it with a cleaning cloth.

Wipe the disc from the

centre out.

• Do not use solvents

such as benzene, thinner,

commercially available cleaners, or antistatic

spray intended for analogue records.

Clean the disc lens

• After prolonged use, dirt or dust may

accumulate at the disc lens. To ensure good

play quality, clean the disc lens with Philips

CD lens cleaner or any commercially

available cleaner. Follow the instructions

supplied with cleaner.

10 Troubleshooting

Warning

•Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site (www.

philips.com/welcome). When you contact

Philips, ensure that the apparatus is nearby

and the model number and serial number are

available.

No power

•Ensure that the AC power plug of the unit

is connected properly.

•Ensure that there is power at the AC

outlet.

•To save power, the unit switches to

standby automatically 15 minutes after

a play reaches the end and no control is

operated.

No sound

•Adjust the volume.

No response from the unit

•Disconnect and reconnect the AC power

plug, then turn on the unit again.

Remote control does not work

•Before pressing any function button, rst

select the correct source with the remote

control instead of the main unit.

•Reduce the distance between the remote

control and the unit.

•Insert the battery with its polarities (+/–

signs) aligned as indicated.

•Replace the batteries.

•Aim the remote control directly at the

sensor on the front of the unit.

DCB3070_10_UM_Book 1_V2.0.indb 20 4/23/2012 12:30:50 PM

English

No disc detected

•Insert a disc.

•Check if the disc is inserted with the print

side facing inward.

•Wait until the moisture condensation at

the lens has cleared.

•Replace or clean the disc.

•Use a nalized CD or correct format disc.

Cannot display some les in USB device

•The number of folders or les in the USB

device has exceeded a certain limit. This

phenomenon is not a malfunction.

•The formats of these les are not

supported.

USB device not supported

•The USB device is incompatible with the

unit. Try another one.

Poor radio reception

•Increase the distance between the unit and

your TV or VCR.

•Fully extend and adjust the FM antenna.

Timer does not work

•Set the clock correctly.

•Switch on the timer.

Clock/timer setting erased

•Power has been interrupted or the power

cord has been disconnected.

•Reset the clock/timer.

DCB3070_10_UM_Book 1_V2.0.indb 21 4/23/2012 12:30:50 PM

Specifications are subject to change without notice

DCB3070_10_UM_V2.0

DCB3070_10_UM_Book 1_V2.0.indb 176 4/23/2012 12:32:07 PM

Table of Contents

Philips DCB3070/10 User Manual

Related Manuals