Table of Contents
Philips DS1600/05 User Manual
Displayed below is the user manual for DS1600/05 by Philips which is a product in the Docking Speakers category. This manual has pages.
Related Manuals
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
DS1600
Question?
Contact
Philips
1EN
Contents
1 Important 2
Safety 2
Notice 2
2 Your Docking Speaker 3
Introduction 3
What's in the box 3
Overview of the main unit 4
3 Get started 5
Connect power 5
Turn on 5
4 Play 6
Play audio from iPod/ iPhone/ iPad 6
Play through an audio cable 7
Other features 8
Update the rmware 9
5 Product information 10
Specications 10
6 Troubleshooting 11
2EN
1 Important
Safety
Only use attachments/accessories specied by
the manufacturer.
Use only power supplies listed in the user
manual.
The product shall not be exposed to dripping
or splashing.
Do not place any sources of danger on the
product (e.g. liquid lled objects, lighted
candles).
Where the plug of the Direct Plug-in Adapter
is used as the disconnect device, the disconnect
device shall remain readily operable.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight, naked
ames or heat.
• Make sure that you always have easy access to the
power cord, plug, or adaptor to disconnect the
apparatus from the power.
Notice
Any changes or modications made to this
device that are not expressly approved by
Gibson Innovations may void the user’s
authority to operate the equipment.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
3EN
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect specically to
iPod, iPhone, or iPad, respectively, and has
been certied by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
Class II equipment symbol:
CLASS II apparatus with double insulation, and
no protective earth provided.
Note
• The type plate is located on the bottom of the
apparatus.
2 Your Docking
Speaker
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/support.
Introduction
With DS1600, you can:
• enjoy audio from your iPod/iPhone/iPad;
• enjoy audio from an external audio device;
• charge any generation of iPod/iPhone/iPad
and external audio devices.
What's in the box
Check and identify the contents of your
package:
• Main unit
• 1 x AC adaptor
• Short user manual
• Safety and notice
4EN
Overview of the main unit
a 30-pin connector
b Lightning connector
c TIME/DATE
• Display time and date.
• Set time and date format.
• Set time manually.
d AUDIO IN
• Audio input connector for connecting
an external audio device.
e POWER OUT
• USB socket for charging your mobile
phone.
f DC IN
• AC power connector for the supplied
AC power adapter.
g Bottom light
c
g
f
e
d
h
j
k
i
b
a
h Display panel
i /
• Adjust volume.
j Toggle switch for lightning/30-pin control
k
• Adjust brightness of display and
bottom light.
5EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
• Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the unit.
• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adapter to:
• the power socket at the back of the
docking speaker.
• the wall power outlet.
Turn on
In standby mode, the docking speaker turns on
automatically when it detects an audio signal
from docked iPod/iPhone.
Switch to standby mode
DS1600 switches to standby mode in the
following situations:
• In dock mode: no audio signal from the
docked iPod/iPhone/iPad over 15 minutes.
• In AUDIO IN mode: no audio signal
detected over 15 minutes.
6EN
4 Play
Play audio from iPod/ iPhone/
iPad
You can enjoy audio from iPod/ iPhone/ iPad by
connecting DS1600.
Compatible iPod/ iPhone/ iPad
The docking system supports the following
iPod/ iPhone/ iPad models.
• iPod/ iPhone/ iPad models with a lightning
connector:
• iPod nano 7th generation
• iPod touch 5th generation
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPad mini 3
• iPad mini with Retina display
• iPad mini
• iPad Air 2
• iPad Air
• iPad (4th generation)
• iPod/ iPhone/ iPad models with a 30-pin
connector:
• iPod classic
• iPod touch (2nd, 3rd, 4th generation)
• iPod with video
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and
6th generation)
• iPod with color display
• iPod mini
• iPhone 4s
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPad (3rd generation)
• iPad 2
• iPad
Switch the dock
Switch the dock between the lightning
connector and 30-pin connector for different
generation of Apple device.
1 Slide the switch to the right.
» The dock swivels and the alternate
connector is accessible.
2 Select your desired connector and press
down until a click sound.
• The switch slides to the left.
Load the iPod/ iPhone/ iPad
1 Connect your iPod/ iPhone/ iPad to the
dock connector.
7EN
2 When using DS1600 for the rst time, a
required software application automatically
pops up.
3 Tap [Yes] (yes)to accept the installation
request.
4 Follow the on-screen instructions to
complete the installation.
» DS1600 synchronizes time and date
from the docked iPod/iPhone/iPad.
Remove the iPod/ iPhone/ iPad
To remove the iPod/ iPhone/ iPad
• Pull your iPod/ iPhone/ iPad out of the
dock.
Tip
• When placing or removing the iPod/ iPhone/ iPad, hold
the iPod/ iPhone/ iPad at the same angle as that of the
connector of DS1600.
• Before disconnecting the iPod/ iPhone/ iPad, pause the
audio play.
Listen to the iPod/ iPhone/ iPad
Note
• Make sure that the iPod/ iPhone/ iPad is loaded
correctly.
• Start music play in your iPod/ iPhone/ iPad.
» You can hear music from DS1600.
Charge the iPod/ iPhone/ iPad
When the docking speaker is connected to
power, the docked iPod/ iPhone/ iPad charges
automatically.
Play through an audio cable
Through an MP3 link cable, you can also play on
DS1600 from an external audio device, such as
an MP3 player.
1 Use an MP3 link cable to connect DS1600
with an external audio device.
2 On DS1600, do the following:
• Make sure that you have paused the
music on your iPod/ iPhone/ iPad
docked on DS1600.
3 On the external audio device, start music
play and change the volume.
8EN
Charge your mobile phone
Charge your mobile phone through the USB
socket in DS1600 with a USB cable (not
supplied).
Other features
Set time and date
A: If an iPod/ iPhone/ iPad is docked, the
speaker synchronizes time and date with the
iPod/ iPhone/ iPad automatically. In this case, you
can set time and date format.
To set time format:
1 In standby mode, press TIME/DATE to
display time.
2 Press and hold TIME/DATE for 2 seconds
to select 12 or 24 hour format.
3 Press TIME/DATE to conrm.
To set date format:
1 In standby mode, press TIME/DATE to
display date.
2 Press and hold TIME/DATE for 2 seconds
to select [MONTH--DAY] or [DAY--
MONTH] display mode.
3 Press TIME/DATE to conrm.
B: If no iPod/ iPhone/ iPad is docked, you can
set time manually.
1 In standby mode, press TIME/DATE to
display [--:--].
2 Press and hold TIME/DATE for 2 seconds
to activate time setting.
» The hour digits blink.
3 Press +/- repeatedly to set the hour.
4 Press TIME/DATE to conrm.
» The minute digits blink.
5 Repeat steps 3 and 4 to set the minute.
Adjust volume
During play, press +/- repeatedly to increase or
decrease the volume.
9EN
Adjust brightness
• Press repeatedly to select different levels
of display light.
• Press and hold to turn on or off the
bottom light.
Update the rmware
With the ClockStudioapp on your iPod/
iPhone/ iPad, you can update the rmware of
DS1600.
1 Make sure that your iPod/ iPhone/ iPad is
connected to the Internet.
2 Mount the iPod/ iPhone/ iPad onto the
lightning dock of DS1600.
» ClockStudio starts to search for
available rmware update.
» When the rmware update is available,
a message is displayed.
3 sec
3 Follow onscreen instructions to complete
rmware updating.
Note
• During the rmware updating, keep the iPod/ iPhone/
iPad powered on and docked on DS1600.
10 EN
5 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Max. Output Power 2 X 2.5 W RMS
Frequency Response 125 - 16000 Hz,
± 3 dB
Signal to Noise Ratio >55 dB
Total Harmonic
Distortion
< 1%
MP3 Link Input 650m V RMS
Amplier
Speaker Impedance 4 ohm
Speaker Driver 1.5''
General information
AC/DC switching adapter Model:
AS250-050-AI400
Input: 100-240 V~,
50/60 Hz, 1.2 A;
Output: 5 V 4 A
Operation Power
Consumption
< 23 W
Standby Power
Consumption
< 1 W
USB Charging voltage DC 5 V
USB Charging current ≤ 1000 mA
iPod/iPhone Charging
voltage
DC 5 V
iPod/iPhone Charging
current
≤ 2100 mA
Dimensions:
- Main Unit (W x H x D) 225 x 149 x 96 mm
Weight:
- Main Unit 0.83 kg
6 Troubleshooting
Warning
• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support). When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
•Make sure that the AC power plug of the
unit is connected properly.
•Make sure that there is power at the AC
outlet.
No sound or poor sound
•Adjust the volume of your docking speaker
or your iPod/iPhone.
No response from the unit
•Disconnect and reconnect the AC power
plug.
2015 Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under the
responsibility of Gibson Innovations Ltd., and Gibson Innovations
Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V. and are used under license from
Koninklijke Philips N.V.
DS1600_05_UM_V3.0