Philips DS3120/05 User Manual
Displayed below is the user manual for DS3120/05 by Philips which is a product in the Docking Speakers category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
DS3120
EN User manual
2EN
Contents
1 Important 3
2 Your Docking Speaker 4
Introduction 4
What’s in the box 4
Overview of the main unit 4
3 Get started 5
Connect power 5
Turn on 6
4 Play 6
Play from iPod/iPhone 6
Play from an external device 8
Adjust volume 9
General information 9
6 Troubleshooting 10
7 Notice 10
3EN
1 Important
Read these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
produce heat.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
by the manufacturer.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
The battery shall not be exposed to
like.
Apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on the
The USB socket is for data transmission
only.
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
Never remove the casing of this apparatus.
Never place this apparatus on other electrical
equipment.
Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
Always bring your product to a professional to
remove the built-in battery.
4EN
2 Your Docking
Speaker
Congratulations on your purchase, and
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking speaker, you can
enjoy audio from the iPod/iPhone, and
other external audio devices; and
synchronize the iPod/iPhone with your
computer through USB socket.
What’s in the box
Check and identify the contents of your
package:
Main unit
AC power adaptor
Quick start guide
Overview of the main unit
a
b
c
d
e
f
a Dock for the iPod/iPhone
b /
Adjust volume.
As LED indicators, show system status.
c
Turn the docking speaker on or off.
d Power supply socket
Connect AC power.
e
Connect a computer with a USB cable.
f MP3-LINK
Connect an external audio device.
5EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Note
The type plate is located at the back of the unit.
Connect the AC power adaptor to:
the power socket at the back of the
docking speaker.
the wall socket.
Built-in Battery
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
The docking speaker can also operate on the
built-in rechargeable battery.
Battery power LED indicator
Low Flashing
Full Steadily on
Empty Off
To recharge the built-in battery:
Connect the docking speaker to the power
supply.
» In standby mode, the LED indicators
are off.
Note
Use the supplied AC adapter only to charge the
battery.
6EN
Turn on
Press to turn the docking speaker on.
» The / LED indicators light up.
Switch to standby mode
The docking speaker switches to standby mode
in the following situation:
Press again;
In AC power supply, the speaker is idle for
15 minutes; or
In battery power supply, the iPod/iPhone
or external audio device is disconnected
from the speaker.
» In standby mode, the / LED indicators
are off.
4 Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
iPod touch (1st, 2nd, 3rd, and 4th
iPod classic
iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
Listen to the iPod/iPhone
To enjoy more features, you are recommended
to install the free DockStudio app.
1 Press to turn the docking speaker on.
» The LED indicators light up.
2 Insert the iPod/iPhone into the dock.
7EN
3
install DockStudio app on your iPod/
iPhone.
4 Tap [Yes]
request.
5 Follow the on-screen instructions to
complete the installation.
6 Launch the app after the installation.
7 Play audio on your iPod/iPhone.
» Audio comes out through this docking
speaker.
Note
With the DockStudio app, you can enjoy music, set
clock and alarm, adjust sound settings, and update
DockStudio
app will search for it automatically and ask you
to download it.
Note
Make sure that your iPod/iPhone is inserted in the
docking speaker and connected to the Internet.
1 OK.
2 Follow the on-screen instructions to
8EN
Note
Do not disconnect power or undock the iPod/iPhone
during the updating process.
Charge the iPod/iPhone
Note
If the docking speaker is operated on the batteries, you
cannot charge your iPod/iPhone.
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Tip
For certain iPod models, it may take up to a minute
before the charging indication appears.
Sync iPod/iPhone with PC
Note
in your PC.
1 Insert the iPod/iPhone in the dock.
2 Press to switch to standby mode.
» The LED indicators light off.
3 Connect your docking speaker and PC
with a USB cable.
4 Launch iTunes to synchronize your docking
speaker with PC.
» The docked iPod/iPhone is
synchronized with PC successfully
through the iTunes.
Note
Due to different materials and product techniques,
some USB cables may not work with this device.
Play from an external device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
Make sure that no iPod/iPhone is docked in the speaker.
1 Press to turn the docking speaker on.
2
to:
the MP3-LINK socket at the back of
the docking speaker.
the headphone socket on an external
device.
» The docking speaker switches to MP3
link mode automatically.
3 Play audio on the device (see the device’s
9EN
Adjust volume
To adjust volume:
Press +/- on your docking speaker; or
Adjust the volume control of your iPod/
iPhone or external device.
Tip
If the docking speaker is powered by batteries, the
volume is lower than that by AC supply.
5 Specifications
Note
Product information is subject to change without prior
notice.
Rated Output Power 2 X 5 W RMS
General information
Power supply
- AC Power
- Battery
Model: AS190-090-
Input: 100-240 V ~,
50/60Hz, 0.7A;
Output: 9 V 1.9 A
Li-ion battery
Operation Power
Consumption
<10 W
Standby Power
Consumption
<0.5 W
Max. load for iPod/
iPhone
5 V 1 A
Dimensions
- Main Unit
224 x 162 x 120 mm
Weight
- Main Unit
- With Packing
1.1 kg
1.6 kg
10EN
6 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Make sure that the AC power adaptor of
the device is connected properly.
Make sure that there is power at the AC
outlet.
No sound or poor sound
Adjust the volume of your docking speaker.
Adjust the volume of your iPod/iPhone or
external audio device.
No response from the unit
Disconnect and reconnect the AC power
plug, and then switch on the device again.
Cannot sync with PC
Switch the docking speaker to standby
mode.
Try another USB cable.
Install iTunes in PC properly.
7 Notice
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
11 EN
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
DS3120_05_UM_V1.0