Table of Contents
Philips HTL3110B/05 User Manual
Displayed below is the user manual for HTL3110B/05 by Philips which is a product in the Soundbar Speakers category. This manual has pages.
Related Manuals
www.philips.com/support
Register your product and get support at
1EN
Contents
1 Important 2
Help and support 2
Safety 2
Mains fuse 3
Care for your product 4
Compliance 4
Care of the environment 4
2 Your SoundBar 5
Main unit 5
Remote control 5
Connectors 6
Wireless subwoofer 7
3 Connect and set up 7
Pair up with the subwoofer 7
Placement 8
Connect to TV 8
Connect audio from TV and other devices 9
4 Use your SoundBar 10
Adjust the volume 10
Choose your sound 10
Play audio through Bluetooth 11
USB storage devices 11
Auto standby 12
Set display brightness 12
Apply factory settings 12
5 Update software 13
Check software version 13
Update software via USB 13
6 Wall mount 14
7 Productspecications 14
8 Troubleshoo ting 16
2EN
1 Important
Read and understand all instructions
before you use your product. If
damage is caused by failure to follow
instructions, the warranty does not
apply.
Help and support
For extensive online support, visit
www.philips.com/support to:
• download the user manual and the
quick start guide
• watch video tutorials (available only
for selected models)
• nd answers to frequently answered
questions (FAQs)
• email us a question
• chat with our support
representative.
Follow the instructions on the website
to select your language, and then enter
your product model number.
Alternatively, you can contact Consumer
Care in your country. Before you
contact, note down the model number
and serial number of your product. You
can nd this information on the back or
bottom of your product.
Safety
Risk of electric shock or re!
• Never expose the product and
accessories to rain or water. Never
place liquid containers, such as
vases, near the product. If liquids
are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Consumer
Care to have the product checked
before use.
• Never place the product and
accessories near naked ames or
other heat sources, including direct
sunlight.
• Never insert objects into the
ventilation slots or other openings
on the product.
• Where the mains plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily
operable.
• Disconnect the product from the
power outlet before lightning
storms.
• When you disconnect the power
cord, always pull the plug, never the
cable.
Risk of short circuit or re!
• Before you connect the product to
the power outlet, ensure that the
power voltage matches the value
printed on the back or bottom of
the product. Never connect the
product to the power outlet if the
voltage is dierent.
Risk of injury or damage to this
product!
• For wall mounting, this product
must be securely attached to
the wall in accordance with the
installation instructions. Use only
the supplied wall mount bracket (if
available). Improper wall mounting
may result in accident, injury or
damage. If you have any query,
contact Consumer Care in your
country.
• Never place the product or any
objects on power cords or on other
electrical equipment.
• If the product is transported in
temperatures below 5°C, unpack
the product and wait until its
3EN
temperature matches room
temperature before connecting it to
the power outlet.
• Parts of this product can be made of
glass. Handle with care to avoid injury
and damage.
Risk of overheating!
• Never install this product in a
conned space. Always leave a
space of at least four inches around
the product for ventilation. Ensure
curtains or other objects never cover
the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new
or carbon and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only
with the same or equivalent type.
• Remove batteries if they are
exhausted or if the remote control is
not to be used for a long time.
• Batteries contain chemical
substances, they should be
disposed of properly.
Risk of swallowing batteries!
• The product/remote control may
contain a coin/button type battery,
which can be swallowed. Keep the
battery out of reach of children at
all times! If swallowed, the battery
can cause serious injury or death.
Severe internal burns can occur
within two hours of ingestion.
• If you suspect that a battery
has been swallowed or placed
inside any part of the body, seek
immediate medical attention.
• When you change the batteries,
always keep all new and
used batteries out of reach of
children. Ensure that the battery
compartment is completely secure
after you replace the battery.
• If the battery compartment cannot
be completely secured, discontinue
use of the product. Keep out of
reach of children and contact the
manufacturer.
This is CLASS II apparatus with double
insulation, and no protective earth
provided.
Use only the power supplies listed in
the user manual.
Mains fuse
This information applies only to
products with a UK mains plug.
This product is tted with an approved
non-molded plug. If you replace the
fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
Contact your dealer if you are not sure
about what type of fuse to use.
Caution: To conform with the EMC
directive (2004/108/EC), do not detach
the plug from the power cord.
How to connect a plug
The wires in the power cord are colored
as follows: blue = neutral (N), brown =
live (L).
If the colors do not correspond with
the colors on your plug, identify the
terminals in your plug as follows:
1 Connect the blue wire to the
terminal marked N or colored black.
4EN
2 Connect the brown wire to the
terminal marked L or colored red.
3 Do not connect either wire to the
earth terminal in the plug, marked E
(or e) or colored green (or green and
yellow).
Before you replace the plug cover, make
sure that the cord grip is clamped over
the sheath of the cable and not just over
the two wires in the cable.
Copyright in the U.K.
Recording and playback of material
may require consent. See Copyright Act
1956 and The Performer’s Protection
Acts 1958 to 1972.
Care for your product
Use only microber cloth to clean the
product.
Compliance
This product complies with the radio
interference requirements of the
European Community.
Hereby, Gibson Innovations declares
that this product is in compliance with
the essential requirements and other
relevant provisions of Directive 2014/53/
EU. You can nd the Declaration of
Conformity on www.p4c.philips.com.
Care of the environment
Disposal of your old product and
battery
Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused.
This symbol on a product means
that the product is covered by
European Directive 2012/19/EU.
This symbol means that the product
contains batteries covered by
European Directive 2013/56/EU
which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and
electronic products and batteries.
Follow local rules and never dispose of
the product and batteries with normal
household waste. Correct disposal
of old products and batteries helps
prevent negative consequences for the
environment and human health.
Removing the disposable batteries
To remove the disposable batteries, see
battery installation section.
5EN
2 Your
SoundBar
Congratulations on your purchase, and
welcome to Philips! To fully benet from
the support that Philips oers, register
your SoundBar at www.philips.com/
welcome.
Main unit
This section includes an overview of the
main unit.
a (Standby-On/Standby indicator)
• Switch the SoundBar on or to
standby.
• When the SoundBar is in
standby, the standby indicator
turns red.
b SOURCE
Select an input source for the
SoundBar.
c Display panel
d +/- (Volume)
Increase or decrease volume.
da b c
Remote control
This section includes an overview of the
remote control.
a (Standby-On)
• Switch the SoundBar on or to
standby.
b Source buttons
HDMI ARC: Switch your source to
HDMI ARC connection.
: Switch to Bluetooth mode.
USB: Switch to USB mode.
AUX: Switch your audio source to
the AUX connection.
COAX: Switch your audio source to
the coaxial connection.
b
a
c
d
f
g
h
i
j
e l
k
6EN
OPTICAL: Switch your audio source
to the optical connection.
c / (Previous/Next)
Skip to the previous or next track in
USB mode.
d (Play/Pause)
• Start, pause or resume play in
USB mode.
e BASS +/-
Increase or decrease bass.
f Volume control
• +/-: Increase or decrease
volume.
• : Mute or restore volume.
g SOUND
Select a sound mode.
h SURROUND ON/OFF
Select surround or stereo sound.
i AUDIO SYNC +/-
Increase or decrease audio delay.
j DIM
Set the brightness of SoundBar
display panel.
k NIGHT
Turn night mode on or o.
l TREBLE +/-
Increase or decrease treble.
Connectors
This section includes an overview of the
connectors available on your SoundBar.
a
• Audio input from a USB storage
device.
• Upgrade software of this
product.
• Charge a USB device.
b DIGITAL IN-COAXIAL
Connect to a coaxial audio output
on the TV or a digital device.
c AUX IN (L/R)
Connect to an analog audio output
on the TV or an analog device.
d DIGITAL IN-OPTICAL
Connect to an optical audio output
on the TV or a digital device.
e DC IN
Connect to the power supply.
f HDMI OUT (ARC) - TO TV
Connect to the HDMI input on the
TV.
bd
cef
a
7EN
Wireless subwoofer
The SoundBar comes with a wireless
subwoofer.
a CONNECT (connect)
Press to to enter the pairing mode
for the subwoofer.
b Subwoofer indicator
• When the power is turned on,
the indicator lights up.
• During wireless pairing between
the subwoofer and the main
unit, the indicator blinks white
quickly.
• When the pairing succeeds, the
indicator lights up white.
• When the pairing fails, the
indicator blinks white slowly.
c AC MAINS~
Connect to the power supply.
3 Connect and
set up
This section helps you connect your
SoundBar to a TV and other devices,
and then set it up.
For information about the basic
connections of your SoundBar and
accessories, see the quick start guide.
Note
• For identication and supply ratings, see
the type plate at the back or bottom of the
product.
• Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.
Pair up with the
subwoofer
The wireless subwoofer automatically
pairs up with the SoundBar for wireless
connection when you turn on the
SoundBar and the subwoofer.
If no audio from the wireless subwoofer
can be heard, manually pair up the
subwoofer.
1 Turn on the SoundBar and the
subwoofer.
» If the connection to the
SoundBar is lost, the indicator
on the subwoofer blinks white
slowly.
2 Press the CONNECT (connect)
button on the subwoofer to enter
the pairing mode.
» The indicator on the subwoofer
blinks white quickly.
8EN
3 On the remote control, within
six seconds press twice then
BASS + once, and then hold down
SURROUND ON.
» If the pairing succeeds, the
indicator on the subwoofer lights
up white.
» If the pairing fails, the indicator
on the subwoofer blinks white
slowly.
4 If the pairing fails, repeat the steps
above.
Placement
Place the subwoofer at least 1 meter (3
feet) away from your SoundBar, and ten
centimeters away from the wall.
For best results, place your subwoofer
as shown below.
Connect to TV
Connect your SoundBar to a TV. You
can listen to audio from TV programs
through your SoundBar. Use the best
quality connection available on your
SoundBar and TV.
Connect to TV through HDMI
(ARC)
Your SoundBar supports HDMI with
Audio Return Channel (ARC). If your TV
is HDMI ARC compliant, you can hear
the TV audio through your SoundBar by
using a single HDMI cable.
1 Using a High Speed HDMI cable,
connect the HDMI OUT (ARC)-TO
TV connector on your SoundBar to
the HDMI ARC connector on the TV.
• The HDMI ARC connector on the
TV might be labeled dierently.
For details, see the TV user
manual.
2 On your TV, turn on HDMI-CEC
operations. For details, see the TV
user manual.
Note
• If your TV is not HDMI ARC compliant, connect
an audio cable to hear the TV audio through
your SoundBar (see 'Connect audio from TV
and other devices' on page 8).
• If your TV has a DVI connector, you can use an
HDMI/DVI adapter to connect to TV. However,
some of the features may not be available.
TV
9EN
Connect audio from TV
and other devices
Play audio from TV or other devices
through your Soundbar speakers.
Use the best quality connection
available on your TV, Soundbar, and
other devices.
Note
• When your Soundbar and TV are connected
through HDMI ARC, an audio connection is not
required. (see 'Connect to TV through HDMI
(ARC)' on page 7)
Option 1: Connect audio through
a digital optical cable
Best quality audio
1 Using an optical cable, connect
the OPTICAL connector on your
SoundBar to the OPTICAL OUT
connector on the TV or other device.
• The digital optical connector
might be labeled SPDIF or
SPDIF OUT.
TV
Option 2: Connect audio
through a digital coaxial cable
Best quality audio
1 Using a coaxial cable, connect
the COAXIAL connector on your
SoundBar to the COAXIAL/DIGITAL
OUT connector on the TV or other
device.
• The digital coaxial connector
might be labeled DIGITAL
AUDIO OUT.
Option 3: Connect audio
through analog audio cables
Basic quality audio
1 Using an analog cable, connect the
AUX connectors on your SoundBar
to the AUDIO OUT connectors on
the TV or other device.
DVD
10 EN
4 Use your
SoundBar
This section helps you use the
SoundBar to play audio from connected
devices.
Before you start
• Make the necessary connections
described in the quick start guide
and the user manual.
• Switch the SoundBar to the correct
source for other devices.
Adjust the volume
1 Press +/- (Volume) to increase or
decrease a volume level.
• To mute sound, press (Mute).
• To restore the sound, press
(Mute) again or press +/-
(Volume).
Choose your sound
This section helps you choose the ideal
sound for your video or music.
Sound mode
Select predened sound modes to suit
your video or music.
1 Press SOUND to select a sound
option from the display panel.
• AUTO: Automatically select a
sound setting based on the
sound stream.
• POWERFUL: Enjoy thrilling
arcade sounds, ideal for action-
packed videos and loud parties.
• BALANCED: Experience the
original sound of your movies
and music, without added sound
eects.
• BRIGHT: Spice up your dull
movies and music with added
sound eects.
• CLEAR: Hear every detail in your
music and clear voices in your
movies.
• WARM: Experience spoken
words and music vocals in
comfort.
• PERSONAL: Personalize
the sound based on your
preferences.
Surround sound mode
Experience an immersive audio
experience with surround sound modes.
1 Press SURROUND ON/OFF to turn
surround mode on or o.
• On: Create a surround listening
experience.
• O: Two-channel stereo sound.
Ideal for listening to music.
Equalizer
Change the high frequency (treble) and
low frequency (bass) settings of the
SoundBar.
1 Press TREBLE +/- or BASS +/- to
change the frequency.
Synchronize video and sound
If the audio and video are not
synchronized, delay the audio to match
the video.
1 Press AUDIO SYNC +/- to
synchronize the audio with the
video.
11EN
Night mode
For quiet listening, night mode
decreases the volume of loud sounds
when audio is played. Night mode
is only available for Dolby Digital
soundtracks.
1 Press NIGHT to turn night mode on
or o.
Play audio through
Bluetooth
Through Bluetooth, connect the
SoundBar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then
you can listen to the audio les stored
on the device through your SoundBar
speakers.
What you need
• A Bluetooth device which supports
Bluetooth prole A2DP, AVRCP and
with Bluetooth version as 3.0 + EDR.
• The maximum operational range
between the SoundBar and a
Bluetooth device is approximately
10 meters (30 feet).
1 Press on the remote control to
switch the SoundBar to Bluetooth
mode.
» BT is displayed on the display
panel, blinking.
2 On the Bluetooth device, switch
on Bluetooth, search for and
select PHILIPS HTL3110 to start
connection (see the user manual
of the Bluetooth device on how to
enable Bluetooth).
» During connection, BT on the
display panel blinks.
3 Wait until you hear a beep sound
from the SoundBar.
» When the Bluetooth connection
succeeds, BT is displayed on the
display panel.
» If the connection fails, BT
on the display panel blinks
continuously.
4 Select and play audio les or music
on your Bluetooth device.
• During play, if a call is coming,
music play is paused. Play
resumes when the call ends.
• If your Bluetooth device
supports AVRCP prole, on the
remote control you can press
/ to skip to a track, or press
to pause/resume play.
5 To exit Bluetooth, select other
source.
• When your switch back to
Bluetooth mode, Bluetooth
connection remains active.
Note
• The music streaming may be interrupted by
obstacles between the device and SoundBar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
• If you want to connect your SoundBar with
another Bluetooth device, press and hold on
the remote control to disconnect the currently
connected Bluetooth device.
USB storage devices
Enjoy audio on a USB storage device,
such as an MP3 player and USB ash
memory, etc.
What you need
• A USB storage device that is
formatted for FAT or NTFS le
systems, and complies with the
Mass Storage Class.
• An MP3 on a USB storage device
12 EN
1 Connect a USB storage device to
this product.
2 Press USB on the remote control.
3 Use the remote control to control
play.
Button Action
Start, pause or resume play.
/ Skip to the previous or next
track.
USB During USB play, press
repeatedly to select a repeat or
shue mode, or turn o a play
mode.
Note
• This product may not be compatible with
certain types of USB storage device.
• If you use a USB extension cable, USB HUB, or
USB multi-reader, the USB storage device may
not be recognized.
• Digital camera PTP and MTP protocols are not
supported.
• Do not remove the USB storage device while it
is being read.
• DRM-protected music les (MP3) are not
supported.
• Support a USB port: 5V , 1A.
Auto standby
When playing media from a connected
device, the SoundBar automatically
switches to standby after 29 minutes
of button inactivity and no audio/video
play from a connected device.
Set display brightness
You can press DIM repeatedly to select
a dierent brightness level of the
display panel on this product.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1 In any source mode, on the remote
control press Volume -, BASS -, and
TREBLE - in sequence within three
seconds.
» When the factory settings
restore is complete, the product
automatically switches o and
restarts.
13EN
5 Update
software
To get the best features and support,
update your product with the latest
software.
What you need
• Connect this product to your TV
through HDMI.
Check software version
In HDMI ARC source, on the remote
control press TREBLE -, BASS -, and
Volume - in sequence.
Update software via USB
1 Check the latest software version on
www.philips.com/support.
• Search for your model and click
on "Software and drivers".
2 Download the software into a USB
storage device.
a Unzip the downloaded le, and
make sure that the unzipped
folder is named "HTL3110.BIN".
b Put the "HTL3110.BIN" le in the
root directory.
3 Connect the USB storage device
to the (USB) connector on this
product.
4 Switch this product to the HDMI
ARC source, and switch your TV to
the HDMI source.
5 On the remote control, within
six seconds press twice then
Volume + once, and then hold
down SURROUND ON.
» If an upgrade media is detected,
on the TV screen you are
prompted to start the update.
» If an upgrade media is not
detected, an error message is
displayed on the TV screen.
Make sure that the latest
software of this product is put in
the USB storage device.
6 Press to start the update.
7 Wait until the update is completed.
» If the update is complete, this
product automatically turns o
and on again.
Caution
• Do not turn o the power or remove the USB
storage device when the software update is
in progress because you might damage this
player.
14 EN
6 Wall mount
Note
• Improper wall mounting may result in accident,
injury or damage. If you have any query,
contact Consumer Care in your country.
• Before wall mounting, make sure the wall can
support the weight of your SoundBar.
• Before wall mount, you need not remove
the four rubber feet at the bottom of the
SoundBar, otherwise the rubber feet cannot
be xed back.
Screw length/diameter
Depending on the type of wall
mounting your SoundBar, make sure
that you use screws of a suitable length
and diameter.
See the illustration in the quick start
guide on how to wall mount the
SoundBar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the
holes.
3) Hang the SoundBar on the fastening
screws.
> 25mm
3.5-4mm
4mm
7 Product
specifications
Note
• Specications and design are subject to
change without notice.
Amplier
• RMS Total output power:
120W RMS (+/- 0.5 dB, 10% THD)
• Frequency response:
20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio: > 65 dB
(CCIR) / (A-weighted)
• Input sensitivity:
• AUX: 900 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage
Class (MSC)
• File system: FAT16, FAT32, NTFS
• Supports MP3 le formats
Bluetooth
•Bluetooth proles: A2DP, AVRCP
•Bluetooth version: 3.0 + EDR
• Frequency band/Output power:
2400 - 2483.5 MHz / ≤ 20 dBm
Wireless speaker link
•Frequency band: 2400 - 2483.5 MHz
•Output power: ≤ 20 dBm
15EN
Main unit
•Power supply:
• Model (Philips branded AC
power adapter): DYS602-
210309W; AS650-210-AA309
• Input: 100-240 V~, 50/60 Hz
1.5 A
• Output: 21V , 3.09A
•Standby power consumption: ≤ 0.5 W
• Speaker impedance
• Woofer: 8 ohm
• tweeter: 16 ohm
• Speaker drivers:
2 x (90mm/3.5" x 34mm/1.3")
woofer +
2 x 31mm/1.2" tweeter
•Dimensions (W x H x D):
843 x 52 x 60 mm
•Weight: 1.4 kg
Subwoofer
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 20 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 4 ohm
• Speaker drivers: 1 x 134 mm (5.25")
woofer
• Dimensions (W x H x D):
226 x 251 x 306 mm
• Weight: 3.9 kg
Remote control batteries
• 1 x AAA-R03-1.5 V
Standby power management
• When the product remains inactive
for 15 minutes, it automatically
switches to standby or networked
standby.
• The power consumption in standby
or networked standby is less than
0.5W.
• To deactivate Bluetooth connection,
press and hold the Bluetooth button
on the remote control.
• To activate Bluetooth connection,
enable Bluetooth connection on
your Bluetooth device, or enable
Bluetooth connection via the NFC
tag (if available).
16
8 Troubleshoo-
ting
Warning
• Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to
repair the product yourself.
If you have problems using this
product, check the following points
before you request service. If you
still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the SoundBar do not
work.
• Disconnect the SoundBar from the
power supply for a few minutes,
then reconnect.
Sound
No sound from SoundBar speakers.
• Connect the audio cable from
your SoundBar to your TV or other
devices.
However, you do not need a
separate audio connection when
the SoundBar and TV are connected
through HDMI ARC connection.
• Reset your SoundBar to its factory
settings.
• On the remote control, select the
correct audio input.
• Make sure that the SoundBar is not
muted.
No sound from the wireless subwoofer.
• Wirelessly connect the subwoofer
to the SoundBar (see 'Pair up with
the subwoofer' on page 7).
Distorted sound or echo.
• If you play audio from the TV
through the SoundBar, make sure
that the TV is muted.
Audio and video are not synchronized.
• Press AUDIO SYNC +/- to
synchronize the audio with the
video.
Error message is displayed on the
display panel.
• When "ERROR" is displayed, it
indicates that an input audio format
is not supported.
• When "USB ERROR" is displayed, it
indicates that the connected USB
device is not supported.
• When "HDMI ARC" blinks, it
indicates that the connected TV
is not HDMI ARC compliant or
an unsupported audio format is
detected.
Bluetooth
A device cannot connect with the
SoundBar.
• The device does not support the
compatible proles required for the
SoundBar.
• You have not enabled the Bluetooth
function of the device. See the user
manual of the device on how to
enable the function.
• The device is not correctly
connected. Connect the device
correctly.
• The SoundBar is already connected
with another Bluetooth device.
Disconnect the connected device,
then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor.
Move the device closer to the
SoundBar, or remove any obstacle
17
between the device and the
SoundBar.
The connected Bluetooth device
connects and disconnects constantly.
• The Bluetooth reception is poor.
Move the device closer to the
SoundBar, or remove any obstacle
between the device and the
SoundBar.
• Turn o Wi-Fi function on the
Bluetooth device to avoid
interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This
does not indicate any malfunction
of the SoundBar.
EN
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
The terms HDMI and HDMI High-
Denition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in
the United States and other countries.
The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Gibson Innovations Limited
is under license. Other trademarks
and trade names are those of their
respective owners.
Specifications are subject to change without notice
2016 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under the responsibility of Gibson
Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used under license.
HTL3110B_05_UM_V1.0